Journal of Electroceramics

Papers
(The median citation count of Journal of Electroceramics is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-06-01 to 2026-06-01.)
ArticleCitations
Extrusion-based additive manufacturing of piezoelectric ceramics: challenges and opportunities54
Ion dynamics and structure of Lithium-Rich nanocrystalline Li₂NiZrO₄47
Correction to: The Fermi energy as common parameter to describe charge compensation mechanisms: a path to Fermi level engineering of oxide electroceramics43
Synthesis, microstructure and characterization of Ultra-low permittivity and dielectric loss ZnO-B2O3-SiO2 glass/SiO2 composites for LTCC application39
Effects of mechanical activation on the formation process of ferroelectric piezoelectric ceramics34
Effects of cobalt nanoparticles addition in Cu0.5Tl0.5-1223 superconductor composite23
From phase coexistence to ferroelectric enhancement: a comparative study of pressing techniques in K0.3Na0.7NbO3 ceramics22
Multi-phase structure and optimal properties of (Ba1-xCax)(Ti0.93Zr0.01Sn0.06)O3 ceramics in the MPB range19
Recent progress in pyrochlore-based nanocrystalline materials for energy, sensing, and electronic applications18
Influence of CoFe2O4 particle size on the development of in-situ phases and magnetic properties of ex-situ combustion derived ferrite-BaTiO3 composite14
Investigation of structural, dielectric, and optical properties of the La0.85Ag0.15Mn0.9Ni0.1O3 ceramic14
A comprehensive insight to the mechanical, thermodynamic, structural, transport and optoelectronic attributes of (B/Al/Ga)SbO3 for sustainable energy applications13
Synergistic effect of impure/pure graphene oxide and TiO2 fillers on the dielectric properties of poly (vinylidene fluoride- hexafluoropropylene) for electroadhesive high load bearing applications12
Ku-band absorption dominated microwave application for sodium doped BZT ceramics12
On the mass action law and the power law response in tin dioxide gas sensors12
Excellent energy storage performance in NaNbO3-based relaxor antiferroeic ceramics under a low electric field10
Exploring energy storage characteristics of lead-free [(Na1 − 3x/2Bi3x/2) (Nb1 − xSrx) O3] ceramics9
Phase-field simulations of the performance and dielectric breakdown of multilayer ceramic capacitors9
Impact of A-site cationic off-stoichiometry on structure-property relationship in the lead-free morphotropic phase boundary system 0.93(Na₀.₅Bi₀.₅TiO₃)-0.07BaTiO₃ (NBT-7BT)9
Effect of grain size on crystal structure and electric properties of Bi(Ni2/3Ta1/3)O3-PbTiO3 ferroelectric ceramics8
Low-temperature sintering of Mg2SiO4 ceramics with CaO–TiO2–P2O5 additive for enhanced microwave dielectric properties7
Self-generated relaxor antiferroelectric composite ceramics with high energy storage properties7
Effect of K0.5Bi0.5TiO3 on energy storage properties and temperature stability of Bi0.5Na0.5TiO3-Bi0.2Sr0.7TiO3 ceramics6
Efficient energy storage and fast charge-switching capability in Co-substituted Ca2Mn2O5 perovskites6
Phase compositions and dielectric properties of Li2Mg3Sn1 − xO6 ceramics attained by reaction sintering process6
Investigation of structural, electronic, and optical properties of Er-doped KNN system based on first-principles calculations6
Probing the physical attributes of calcium-based perovskites for ACaI3 (A = Li and Na) perovskites for next-generation renewable energy devices via TB-mBJ approach5
A DFT study of the structural, electronic, optical, thermoelectric, and thermodynamic properties of the halide double perovskite Cs2CeCl65
Piezoelectricity improved and c-axis orientation restrained of SrBi2Nb2 − x(Cr1/3W2/3)xO9 piezoelectric ceramics5
Effect of Eu and Mn co-doping on temperature dependent dielectric relaxation behaviour and electric conduction mechanisms of bismuth ferrite5
Energy harvesting properties of the d31 type piezoelectric cantilever harvester5
A roadmap to high-performance Ta-doped LLZO: synergistic optimization of synthesis, microstructure and electrochemical properties5
Microwave-assisted heat treatment of Y3Ba5Cu8O18 phase: Toward sustainable processing of high-temperature superconductors5
Experimental evaluation of a supercapacitor-biased bipolar junction transistor switch for battery charging charging system5
Structural and electrical aspects of microwave sintered (Ba1-xCaxSn0.09 Ti0.91) O3 ceramics5
Improving energy storage density, piezoelectric, and energy harvesting performances of eco-friendly (Bi0.49−xBaxLa0.01Na0.40K0.10)TiO3 ceramics by composition design strategy5
Ferroelectric stability and fatigue mechanism of BNKT ceramics by Nb doping4
Back to basics: synthesis of metal oxides4
Investigation of structural, vibrational, and dual-ferroic properties of BaTiO3-Ni0.7Zn0.3Fe2O4 nanocomposites4
Structural, dielectric, and ferroelectric characteristics of the low-temperature sintered 65PMN-35PT sample for electroceramic applications4
Prediction of electronic structure and nonlinear optical properties of zinc oxide nanostructures by experimental characterization and theoretical investigation4
A review on magnetorheological elastomers and piezoelectric materials to control vibration and harvest electrical energy4
Back-to-basics tutorial: Secondary ion mass spectrometry (SIMS) in ceramics4
Microcrystallization and its effects on Eu2O3-doped LaO3/2-AlO3/2-ZrO2 glass prepared by containerless technique4
The study of BST-xBMN dielectric materials4
Design of a new phase boundary to enhance the piezoelectric properties of lead-free (K0.48Na0.48Li0.04)(Nb0.95Sb0.05)O3 – Bi0.5K0.5HfO3 ternary ceramics4
Effect of temperature on the rate of reaction of MnWO4 for drug degradation4
Effects of Si4+ and Co3+ co-doping on the structural and electrical conductivity of Li1.3Al0.3Ti1.7(PO4)3 ceramic electrolytes3
LiFePO₄ with enhanced electrical conductivity via nitrogen-doped carbon coating layer3
An overview of the optical and magnetic properties of Ba0.6Cd0.4TiO3 micro rods prepared by the facile sol-gel approach for spintronic applications3
Investigation of electrical and optoelectronic properties of NaCo₂O₄ ceramic based device for functional applications3
Water-free gel synthesis of Co-doped Mn3O4 nanoparticles for high-performance zinc-ion batteries: enhanced conductivity and cycling stability3
Nonlinear magnetoelectric properties in Ba(Fe0.5Ta0.5)O3 ceramics3
Rich oxygen vacancies promotes MoO2/N-doped carbon nanoribbons for high-performance sodium/potassium-ion batteries3
Electric field-induced strain mechanism in multi-cationic quenched fired BiFeO3-based piezoceramics3
Efficient PENG based on KNN/PVDF composite fibers for wearable and flexible energy harvesting devices3
Enhanced electric field induced strain of Hf4+ doped 0.67BiFeO3-0.33BaTiO3 lead-free piezoelectric ceramics3
Dielectric and conductivity response of Sol-Gel derived Mn₃O₄ nanoparticles to frequency and temperature variations3
Voltage breakdown strength and energy density of ceramic SrTiO₃ at cryogenic temperatures from 295 K to 77 K3
Dielectric, piezoelectric, and ferroelectric properties of Sm3+/Nd3+/Mn2+-doped and Sm3+/Mn2+-, and Nd3+/Mn2+-codoped 0.24PIN-0.46PMN-0.30PT ternary ceramics3
Crystallographic study, spectroscopy properties, and magnetic response of BiFeO3 substituted at the A- and B-sites3
Ionic-conductive poly (vinylidene fluoride) polymer as a versatile binder to stabilize high-voltage LiCoO2 cathode materials3
Improvement of electrical properties for CaBi4Ti4O15 piezoelectric ceramics by rare earth La3+ modification3
Ca, Sr or Mg-doped Ceria Electrolytes Prepared by Citrate-Nitrate Combustion Synthesis: Effect of Doping Concentration3
Actuating performance for functionally graded piezoelectric materials with interdigitated electrodes2
Correction to: A comprehensive study of structural, dielectric, electrical, thermal, and optical properties of Na/W co-doped BiMnO3 complex electroceramic; (Bi1/2Na1/2)(Mn1/2W1/2)O32
Bayesian calibration of electrical conductivity relaxation and isotope exchange-secondary ion mass spectrometry experiments2
Phase separation phenomenon and densification process in (K, Na)NbO3 ceramics indued by microcrystalline template2
Classification of magnetic ground States and prediction of magnetic moments for ABX3 perovskites utilizing machine learning techniques2
Comparative analysis of magnetocaloric effect in La0.67-xEuxBa0.33Mn0.85Fe0.15O3 (x = 0 and 0.1) polycrystalline manganites: experimental vs. theoretical determination2
De-ageing of 1–3 piezocomposites by thermal cycling and degradation due to encapsulation2
Tunning the dielectric and energy storage properties of high entropy ceramics (Bi0.2Na0.2K0.2La0.2Sr0.2)(Ti1-xScx)O3 by Sc-doping at B-site in perovskite structure2
Comparative study of Mn2+ and Zr4+ co-substituted Zn-Co spinel ferrites as microwave absorbing materials in Ku (12.4–18 GHz) and K (18-26.5 GHz) frequency bands2
Effects of ZBS addition on crystallization, microstructure and dielectric properties of low temperature co-fired Mg2SiO4-CaTiO3 ceramics2
Influence of calcination temperature on characteristics properties of Bi1/2(Na0.8K0.2)1/2TiO3 prepared by sol-gel method2
Cross over from colossal permittivity to space charge polarization regime in (Mg₁/₃Nb₂/₃)ₓTi(₁₋ₓ)O₂2
Transport properties of CuxCo4Sb11.7Te0.3 prepared by solid-state reaction2
Phase transition and electrical properties of high performance, high temperature Bi(mg,Ti)O3-PbTiO3-PbZrO3 relaxor ferroelectric ceramics2
Effect of Co2+ substitutions on microstructure and dielectric properties of Bi1.5MgNb1.5O7 cubic pyrochlore2
Optimization of the K/Na ratio in lead-free Bi0.5(Na1-xKx)0.5TiO3 ceramics utilizing TiO2 nanostructures2
Effect of sintering temperature on structural phase coexistence, microstructure, and electromechanical properties of (1 − x) (K0.5Na0.5)NbO3 – xBaTiO3 (x = 0.06) lead-free ceramics2
Effective properties of piezoelectric 1–3 composites: finite element analysis and experimental verification2
A DFT study of Alkaline-earth-metal-doped Hf1 − xAxO2(A = Be, Mg, Ca) for photovolataic applications2
Comprehensive analysis of structural, optical, morphological, and magnetic properties of Mn, Fe-Doped BaTiO3 nanoparticles1
Preparation of LSGM electrolyte via fast combustion method and analysis of electrical properties for ReSOC.1
Influence of La doping on structural, morphological and optical characteristics of eco friendly yellow inorganic pigment Bi4Zr3O121
Trade-off analysis of MWCNT-Added LNMO1
The enhanced dielectric response of (Ba, Sr)TiO3-Y2/3Cu3Ti4O12/TiO2 composite ceramics1
TiO2-Based Nanostructured Electrodes for High-Performance Supercapacitors: A Comprehensive Review1
Conduction mechanisms and complex impedance analysis in La0.6Sr0.4FeO3 ceramic1
YSZ-based mixed potential type NO sensor with iron oxide sensing electrode for breath diagnosis1
Efficient acetone sensing utilizing Co3O4-Embedded porous ZnO nanofibers1
Influence of synthesis method on structural, microstructural, and magnetic properties of Bi0.5La0.5FeO3 ceramics1
LiTaO3 doping-induced modifications in structure and electromechanical properties of lead-free BNT-6BT ceramics1
TiO2-assisted Mg-Ti-O-based ceramics improve thermal conductivity and microwave dielectric properties by modifying the microstructure1
Exploring the first order reversal curves of Mn, Nd doped CoFe2O4–Yb doped PbZrTiO3 based composites1
Spark plasma sintering of cerium (IV) oxide under a carbon dioxide atmosphere1
High-sensitivity accelerometer based on [001]-textured Mn-PMN-PZT piezoelectric ceramics1
Thick films for high-temperature piezoelectric applications - a future reference1
Structural and dielectric properties of microwave dielectric materials xBa(Zn1/3Ta2/3)O3 - (1-x)La(Zn1/2Ti1/2)O31
Enhancing supercapacitor performance: The Influence of doping in spinel ferrite materials1
Structural, dielectric, and electrical studies of Sm-doped Sr0.95Ba0.05Bi2Nb2O9 lead-free relaxor ceramics1
Structure, morphology, ferroelectric and piezoelectric properties of (Bi0.5Na0.5)1–xBaxTiO3 ceramics produced with application of high-power ultrasound1
Effect of sintering temperature on energy storage performance of (Pb0.2Ca0.2Mg0.2Sr0.2Ba0.2) TiO3 high-entropy perovskite ceramics1
Fe/Fe3C modified C@Si/SiOx anodes to achieve significantly enhanced lithium storage performance1
Diffuse phase transition and ferroelectric/piezoelectric properties of Pr-doped 28PIN-38PMN-34PT ceramics1
From crystal structures to functional devices: a review of mixed metal oxides in energy conversion and sensing systems1
Enhanced temperature stability of Li3Mg2NbO6-based ceramics by using LTC composite additives1
Development of Y-Doped Co-Cu Ferrites with enhanced magneto-dielectric properties for high-frequency antennas1
Effect of Dy3+ ions substitution on structural, electrical, and dielectric properties of SrDyxFe12-xO19 hexaferrite prepared by sol-gel combustion method1
Quantum insights into physical characteristics for optoelectronic performance of TbSc1 − xMxO3 (Mx = Cr, V; x = 0.25): a DFT approach1
MgTiO3-based ceramics for enhanced EMI shielding solutions in K and Ka frequency bands1
Enhanced dielectric breakdown strength and energy storage properties of Ba0.3Sr0.7TiO3 ceramics by introducing Ba2TiSi2O81
Influence of lithium on Cu-doped ZnO thin films fabricated via sol-gel spin coating technique for improved NO2 gas sensing applications1
Synthesis of single phase Ti4+ substituted Trirutile CoNb2O6 Ceramic: evolution of Relaxor type ferroelectricity and high k dielectricity1
Structural, vibrational, magnetic, and dielectric properties of hexagonally ordered Cr-doped LuMn1 − xCrxO3 (0 ≤ x ≤ 0.08) manganite1
1.1156659126282