Mechanics of Time-Dependent Materials

Papers
(The median citation count of Mechanics of Time-Dependent Materials is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-02-01 to 2025-02-01.)
ArticleCitations
An experimental and modeling investigation on the effects of temperature and strain rate on the tensile-deformation behavior of TB991 weld sealant34
Transient thermoelastic response in a semi-infinite medium subjected to a moving heat source: an implementation of the Moore–Gibson–Thompson model with higher-order memory-dependent derivatives18
The effect of a geometry-based breathing crack model on a viscoelastic composite rotor-shaft system15
Tailorable non-linear viscoelastic behavior of hydrogels15
Stress-induced diffusion in viscoelastic electrode particles of Li-ion batteries: a comparative analysis using chemo-viscoelastic finite element models14
Simultaneous determination of dynamic fracture toughness and tensile strength through a single three-point bending test13
Evaluation of viscoelastic non-isochoric plastic behavior of PBT and PA612
Creep instability analysis of viscoelastic sandwich shell panels12
Modeling the strain-softening behavior of glass-filled epoxy composites using a hyperelastic–viscoplastic model12
The effects of cyclic fluid pressure on time-dependent corrosion behaviour of offshore concrete caused by chloride ions10
Humidity field in early-age shotcrete with alkaline and alkali-free accelerators10
Time-dependent behavior of discontinuous biocomposites in soft tissues10
Simulation of time-fractional oxygen diffusion in cornea coated by contact-lens10
Modeling the viscoelastic behavior in the frequency domain of crosslinked polystyrene with different degrees of crosslinking from the perspective of relaxation10
Study on a damage model of NEPE solid propellant based on a Weibull distribution9
Loading history effect on time-dependent deformations after unloading – reversible creep of soft rock (marl)8
Evaluating the tensile stress relaxation of rib weft-knitted fabrics using viscoelastic models8
Modeling the creep behavior of coal in a physical fractal framework8
Simulations for mechanical properties of polymer composites: investigations into suitability of numerical models for TPU-CNT with Mooney–Rivlin ($N = 1$) and friction8
The effect of thermal aging on the mechanical properties of ethylene propylene diene monomer charge coating8
A modified creep model for rock considering hardening and damage8
Modeling of a homogeneous isotropic half space in the context of multi-phase lag coupled thermoelasticity7
Analysis of waste discharge concentration in radiative hybrid nanofluid flow over a stretching/shrinking sheet with chemical reaction7
Free vibration of foam plates on viscoelastic foundations considering thickness stretching7
Experimental evaluation and uncertainty quantification for a fractional viscoelastic model of salt concrete7
Mechanical characterization and constitutive modeling of aluminum AA1050 subjected to high strain-rates7
A viscoelastic-viscoplastic mechanical model of time-dependent materials based on variable-order fractional derivative6
Characterization of multi-step creep behavior and fractional derivative modeling for a water-saturated coal6
The vibration propagation and damage distribution characteristics of deep-buried underground cavern blasting6
The creep behavior of rock shear seepage under different seepage-water pressures6
Modeling the visco-elastoplastic behavior of deep coal based on conformable derivative6
Characterization and modeling of the compressive behavior of a granite experiencing thermal damage6
A practical model to predict the time-dependent behaviour of angle-ply laminates from limited creep data6
Energy evolution characteristics and mechanical properties of freeze-thawed red sandstone under repeat impact loading6
Thermoelectric interactions in Euler–Bernoulli microbeams under the influence of a thermal pulse via the size-dependent couple stress model6
Creep behavior and damage constitutive model of sandstone: an experimental study on seepage-load coupling5
Study on the effect of dynamic disturbance on creep behavior of frozen fractured red sandstone5
High-fidelity-generalized-method-of-cells micromechanical analysis of damage evolution in viscoelastic composites5
Full-stage creep model for deeply buried soft rock based on fractional order differential and Perzyna overstress function5
Free vibration analysis of bio-inspired helicoid laminated composite plates resting on elastic foundation using isogeometric analysis and artificial neural network5
Dynamic mechanical response and functional mechanisms in rabbit pulmonary tissue5
EFG method in numerical analysis of foam materials5
Large-amplitude oscillatory shear to investigate the nonlinear rheology of polymer glasses – PMMA5
Relaxation behavior of a three-layered wire cable under a combined tension and bending load5
A nonlinear visco-elasto-plastic creep model for sandstone considering creep initiation conditions and experimental verification5
Modeling strain-induced dual-phase transformation in semicrystalline polylactide5
Thermorheological approach to predict long-term creep of cement mortar from short-term tests5
A material constants estimation method for efficient elastic–plastic–creep simulation of aluminum alloys by effective utilization of stored test data4
A creep constitutive model based on Atangana–Baleanu fractional derivative4
Characterising the linear viscoelastic behaviour of an injection moulding grade polypropylene polymer4
An accelerated creep model for the rock downstream of a Xianglushan tunnel4
Electroosmotic flow of fractional Maxwell fluid in a microchannel of isosceles right-triangular cross-section4
A phenomenological model to simulate various aspects of nonlinearity in creep behavior and to predict long-term creep strain4
Remaining useful life prediction of silicone foam using matching pursuit and a particle filter4
The influence of fabric structure and loading direction on the tensile stress relaxation of rib weft-knitted fabrics4
The creep behavior and damage evolution evaluated by acoustic emission of thermally-cycled argillaceous siltstone at selected temperatures4
Preparation of a surrogate material for coal creep and the simulation of its damage evolution emulating the coal pillar creep4
Creep characteristics and fractional rheological model of granite under temperature and disturbance load coupling4
Localized creep analysis of polyurea elastomer from full-field measurements4
Thermomechanical interactions in nonlocal thermoelastic medium with double porosity structure3
Photo-thermoelastic inter action in a semiconductor with cylindrical cavity due to memory-effect3
The effect of viscosity and hyperbolic two-temperature on energy ratios in elastic and piezoviscothermoelastic half-spaces3
Integration of Miner’s approach in linear amplitude sweep test data to determine the fatigue life of asphalt binders3
Influence of strain rate on nanoparticle debonding in polymer nanocomposites3
Characterization of the thermal, water absorption, and viscoelastic behavior of short date palm fiber reinforced epoxy3
The effect of early-age freeze–thaw cycle damage on hydraulic concrete self-healing3
An irreversible process and radial stagnation-point motion of tetra-hybrid nanoparticles on twisting cylinder via finite element analysis3
The influence of an internal variable heat source on the perfect contact of three thermoelastic layers characterized by hereditary features3
Nonlinear static/transient behaviors of CNT-reinforced magnetoelectromechanical smart plates and shells considering agglomeration via a dual-director shell model3
Analysis of thermoelastic damping in a microbeam following a modified strain gradient theory and the Moore-Gibson-Thompson heat equation3
Analysis of solid lubricating materials microstructures properties in the frame of cylindrical coordinates system and reduced micromorphic model3
Constitutive modeling of viscoelastic-plastic strain characteristics and damage in southern China red sandstone under chemical exposure3
The aging behavior of HDPE pipe bodies and butt-fusion welded joints: effects of thermal oxidative and hydrothermal accelerated aging3
Photothermoelastic response due to Hall current and gravity effects in a hyperbolic two-temperature semiconducting medium with voids under a moving thermal load3
An analytical solution for the time-dependent anchoring force in prestressed cables due to rock creep3
Characterization of the mechanical energy absorption of honeycomb core sandwich panels filled with shear thickening fluid under low speed impact3
Memory effect analysis of magneto-thermoelastic response of viscoelastic rotating nanobeams based on nonlocal and modified coupled stress elasticity theories3
Higher-order heat conduction model in a rotating micropolar thermoelastic medium with moving heat source and electromagnetic field3
3D wave dispersion analysis of graphene platelet-reinforced ultra-stiff double functionally graded nanocomposite sandwich plates with metamaterial honeycomb core layer3
An analytic description of the creep deformation of metals in the ultrasonic field2
A modified Green–Naghdi fractional-order model for analyzing thermoelectric semispace heated by a moving heat source2
Creep of particle and short fibre reinforced polyurethane rubber2
Modified Moore–Gibson–Thompson Pennes’ bioheat transfer model for a finite biological tissue subjected to harmonic thermal loading2
Dynamic damage and fracture characteristics of granite under cyclic impact simulated with coupled finite-difference and discrete element methods2
Characterization of the shear-creep behavior of rocks and modeling with viscoelastic–plastic rheological models2
A modified Johnson–Cook model for 2A12 aluminum alloys2
Stress relaxation behavior and its effect on the mechanical performance of a wire cable2
Significance of trihybrid nanoparticles in non-Newtonian fluids: a finite-element simulation of magnetohydrodynamic effects under microgravity conditions2
Numerical analysis of TiO2–Al2O3/water and Ag–MoS2/water hybrid nanofluid flow over a rotating disk with thermal radiation and Cattaneo–Christov heat flux effects2
Modeling peristaltic nanofluid flow with microorganisms for thermal therapy: a CFD and entropy analysis2
High-speed impact performance of a high-performance concrete with functionally gradient structure designs2
Memory-dependent response of the thermoelastic two-dimensional functionally graded rectangular plate2
Modeling the hyperviscoelastic and stress-softening behaviors of S-SBR/CB-filled rubber compound using a multicomponent model2
Modeling the nonlinear creep behavior of Entandrophragma cylindricum wood by a fractional derivative model2
An investigation of biological tissue responses to thermal shock within the framework of fractional heat transfer theory2
The effect of shrinkage-reducing agents on autogenous shrinkage and drying shrinkage of cement mortar with accelerator2
A linear strength criterion for rock considering end-friction effect2
Creep analysis in a rotating variable thickness functionally graded disc with convection heat transfer and heat source2
Simulating cylinder torsion using Hill’s linear isotropic hyperelastic material models2
Modeling the thermal behavior of functionally graded media with a spherical gap: rectified sine wave heating via fourth-order Moore–Gibson–Thompson model2
Effect of graphene nanoplatelets and multiwalled carbon nanotubes on the viscous and viscoelastic properties and printability of polylactide nanocomposites2
Effects of applied strain, magnetic field, and temperature on the compressive stress relaxation behavior of magneto-sensitive elastomers2
The plastic strengthening effect after long-term endurance and fatigue verification of aero-engine turbine blade single crystal superalloy2
Vibration of rectangular plate on fractional order viscoelastic foundation subjected to standing and moving loads2
Experimental research and fractional calculus constitutive model for a rock mass with nonpersistent joints2
Stress relaxation behavior of an expansive clay under low confining pressure: experimental characterization and predictive modeling2
Thermodiffusion interactions in a homogeneous spherical shell based on the modified Moore–Gibson–Thompson theory with two time delays2
Constitutive modeling of rock materials based on variable-order fractional theory2
Refined four-phase lag model for elasto-thermodiffusive interaction with harmonically varying heat sources2
An investigation of the coal wall zoning failure patterns resulting from the changes in support parameters of large mining height1
Dynamic tensile properties of thermally treated concrete specimens subjected to varied heating rates: an investigation using the digital image correlation method1
Creep-failure pattern and micromorphological evolution of simulated silty mudstone under multistaged loading1
Dynamic response of viscoelastic functionally graded barrel and hyperboloidal coil springs with variable cross-sectional area1
Temperature-dependent thermal conductivity in Green–Naghdi (type III) thermoelastic half-space with hydrostatic initial stress1
Thermal analysis of MHD convective slip transport of fractional Oldroyd-B fluid over a plate1
Analysis of stress and deformation of an exponentially graded viscoelastic coated half plane under indentation by a rigid flat punch indenter tip1
Potential effect of Cattaneo–Christov heat- and mass-flux analysis for Maxwell fluid near a squeezed surface1
Analysis of thermal cavitation in a viscoelastic composite sphere under a uniform temperature field1
On the parameters identification of three-dimensional aging-temperature-dependent viscoelastic solids through a Bayesian approach1
A viscoelastic–viscoplastic model for adhesives subjected to reversed cyclic load1
Determination of the high-strain rate elastic modulus of printing resins using two different split Hopkinson pressure bars1
The liquid film of the time-dependent cross-fluid flow over an inclined disk through an artificial neural network1
A Caputo fractional damage creep model and its experimental validation1
Characteristics of nonlocal fractional magneto-thermoviscoelastic waves in a micro-rod heated by a moving heat source1
Assessment of the stepped isothermal method for accelerated creep testing of high-density polyethylene1
Comparative study on the hydraulic conductivity of pervious concrete slabs by constant and falling head permeability tests1
Enhanced heat transportation for bioconvective motion of Maxwell nanofluids over a stretching sheet with Cattaneo–Christov flux1
Study of a time-harmonic load on a Kirchhoff–Love plate with modified thermoelasticity theory using higher-order memory-dependent derivatives1
Calculation of the effective properties of thermo-viscoelastic composites using asymptotic homogenization in parametric space1
Time-dependent autogenous shrinkage of shotcrete with alkaline and alkali-free accelerators1
Advanced thermal performance of blood-integrated tri-hybrid nanofluid: an artificial neural network-based modeling and simulation1
Analysis of the energy and damage evolution rule for sandstone based on the particle flow method1
Effect of gas pressure on the creep and seepage characteristics of low permeability coal1
Thermo-mechanical response of an elastomeric isolation system using real-time hybrid simulation1
Thermo-mechanical waves in a biological tissue under ramp and oscillatory heat in Atangana–Baleanu fractional theory1
Wave propagation and free vibration of a Timoshenko beam mounted on the viscoelastic Pasternak foundation modeled by fraction-order derivatives1
Conformable derivative models for linear viscoelastic materials1
Free vibration of functionally graded viscoelastic foam plates using shear- and normal-deformation theories1
Numerical analysis of radiative MHD gravity-driven thin film third-grade fluid flow with exothermic reaction and modified Darcy’s law on an inclined plane1
Piezothermoelastic vibrations of microbeam resonator with memory effects1
Finite element modelling of ultrasonic assisted hot pressing of metal powder1
A bridge between the fractional viscoelasticity and time-varying viscosity model: physical interpretation and constitutive modeling1
The effect of bedding on deformation localization and damage constitutive modeling in coal specimens1
Heat build-up and dynamic compressive behavior of anisotropic magnetorheological elastomer1
Assessment of the strength deterioration of a coal pillar using a strain-softening time-dependent constitutive model1
A modified fractional order thermo-viscoelastic theory with fractional order strain and its application in a thermo-viscoelastic problem containing a spherical cavity1
Uniaxial tension of Kevlar-filled EPDM rubber sheet: effect of fiber orientation and distribution1
The difference between the dynamic deformation properties of rock material under seismic load and cyclic loading: a case study on Kobe wave1
A nonlinear viscoelastic–viscoplastic constitutive model for adhesives under creep1
Ratcheting and recovery of adhesively bonded joints under tensile cyclic loading1
Analysis of a magneto-thermoelastic problem in a piezoelastic medium using the non-local memory-dependent heat conduction theory involving three phase lags1
Nonlocal and micropolar effects in a transversely isotropic functionally graded thermoelastic solid under an inclined load1
Evaluation of properties in bitumen insulation by impact microindentation on the base of rheological models1
Investigating reflection phenomenon of plane waves in a fractional order thermoelastic rotating medium using nonlocal theory1
The shear-creep behavior of the weak interlayer mudstone in a red-bed soft rock in acidic environments and its modeling with an improved Burgers model1
Time domain homogenisation of elastic and viscoelastic metamaterials1
A fractional model of nonlinear multiaxial viscoelastic behaviors1
A modified neo-Hookean model for semi-crystalline thermoplastics assessed by relaxation and zero-stress creep tests of recycled polypropylene and polyoxymethylene1
Hygro-mechanical behaviour of cement paste and mortar during drying1
Linear viscoelastic response of emulsified-asphalt cold recycled mixtures1
Experimental and numerical study on developed elastomeric layers based on natural and butyl matrix rubbers for viscoelastic dampers1
Evaluating the viscoelastic shear properties of clear wood via off-axis compression testing and digital-image correlation1
Effect of loading rate on mechanical behavior of coal samples with initial damage accumulation1
3.1850461959839