International Journal of Applied Electromagnetics and Mechanics

Article	Citations
Advanced 3D electromagnetic transient-thermal steady coupled FEM simulation of a LV busbar of a rectifier transformer	21
Rapid computation for dynamic response of the rocket sled based on GPU parallel technology	11
Two complementary examples of electrification in the cement industry	11
Optimization of dual-function suspension structures using particle swarm optimization approaches	8
An improved subdomain modeling technique for surface-mounted permanent magnet Vernier motor	8
Wire gauge analysis of planar spiral coil and its optimization technique in Wireless Power Transfer system	7
Linear antenna array modeling with deep neural networks	7
A novel scheme for determination of vessel heading using airborne magnetic wake scanning	7
Research on identification method of transformer winding material based on vibration characteristic	6
Study of a new axial-field superconducting inductor for a synchronous machine	6
Sensitivity analysis for the eddy current testing of carbon fiber reinforced plastic materials	5
An overview of power loss calculation methods for high-frequency litz wires	5
Simulation and experimental research on electromagnetic radiation from suspended permanent magnetic levitation train	5
From topology optimization to additive manufacturing of soft magnetic cores	5
A new dynamic displacement prediction method for contactors with constant air gap	5
Optimal analysis on coil and rotor in a diamagnetically airflow energy harvester	5
Parameter sensitivity analysis and efficiency optimization design of wireless charging system	5
Analytical calculation method of a liquid-cooling eddy current brake considering magnetic saturation and skin effect	5
Reducing heat generation in a boost inductor using a magnetic tape	5
Analysis of current linkage harmonics in multi-phase machines with distributed windings	4
Magnetic field prediction method for electromagnetic propulsion device with frequency-domain magnetic diffusion constraints	4
3D analytical magnetic model calculation for Halbach PM induction heater planar topology	4
A new efficiency figure of merit for induction heating appliances operating under highly variable operating conditions	4
Modeling and analysis of a thrust anti-torque sensing actuator	4
A simplified magnetostrictive model under rotational magnetization in an electrical steel sheet taking the pinning hysteresis effect into account	4

Neural metamodelling of fields: Towards a new deal in computational electromagnetics	4
Design and harmonic analysis of single winding bearingless PM synchronous motor with high winding coefficient	4
Parameter identification method of J–A hysteresis model based on improved sparrow search algorithm	4
An efficient numerical scheme for reconstruction of vibration loads based on a dynamic transfer matrix method	4
Cogging torque and torque ripple reduction of surface-mounted permanent-magnet synchronous motor considering rotor stress	4
Design and experimental verification of hybrid excitation magnetic field modulation machine for electric vehicle propulsion	4
A portable induction heating system for implanted prosthesis disinfection	4
An efficient robust optimization methodology for metamaterial unit design	4
Coupled electric circuits method applied to pulsed eddy current NDT problem	3
Analytical calculation of magnetic field in surface-mounted permanent-magnet vernier motors	3
Performance analysis of magnetic gear composite linear generator with single salient pole permanent magnet and integrated magnetic adjusting ring	3
Comparison of random and periodic rough surfaces by ultrasonic attenuation and frequency distribution	3
Non-cascaded finite time control of PMSLM based on super-twisting observer	3
Introduction to the special issue Deep learning for analysis and synthesis in electromagnetics	3
Transient thermographic signal analysis for thinning detection in composite plate	3
Transient analysis of axial electromagnetic force in transformer windings under overcurrent impacts	3
A New Type of SH-Guided Wave EMAT based on Barker Code Pulse Compression Technology with Tone-Burst Excitation	3
A probability of detection model for a sensor-based monitoring method against local wall thinning	3
Comprehensive Study of a FMaSynRM for forklift applications by FEM using open-source platform considering both electromagnetic design and modelling aspects	3
Study of electrical volume-conductivity, tensile strength, and electromagnetic shielding effectiveness of coconut fiber composite	3
Detection mechanism of delamination in thermal barrier coatings of turbine blade using a Rayleigh wave EMAT	3
A novel high-static-low-dynamic stiffness isolator with enhanced negative stiffness magnetic spring using variable reluctance stress	3
Development of non-destructive tools for in-situ condition assessment of austenitic stainless steel boiler tubes	3
Effect of intermittent theta burst stimulation on brain network between the hippocampus and prefrontal cortex of aged rats	3
Novel design method for a PMSM based on loading separation	3
Employing automatic differentiation and neural networks for parameter identification of an energy based hysteresis model	3
Eddy currents operation parameters optimization	3
A ferrite-cored funnel-shaped probe for pulse-modulation eddy current screening of pitting corrosion in conductive heterostructures	3
Operating modal analysis from sub-sampled vibration response based on compressed sensing and FastICA	3
Torque modeling of reluctance spherical motors using the virtual work method	3
A Fast Method for Calculating the High Altitude Electromagnetic Pulse Environmental Parameters Based on Neural Network	3
Finite element analysis and experimental verifications of low-speed rotor torque of magnetic-geared motor with permanent magnets only in stator	3
Optimization of Electromagnetic Layout for E-machine in Electric Vehicles: Achieving High Performance, Efficiency and NVH	3
Proposal of detecting for thickness method of hot spring scale inside steel pipes using vibration	3
Design and analysis of in-wheel motor with sinusoidal permanent magnet shape for electrical vehicles	3
Study on EMI suppression of a high–low voltage DC/DC converter in electric vehicle by periodic frequency modulation	3
Modeling and analysis of tubular flux-switching permanent magnet linear generator with hybrid cores for stirling generator	3
Impacts of structural parameters on the steady magnetic behaviors of a novel high-speed on off valve for clutch shift system	3
High resolution magnetic field imaging probe with two rows of TMR sensors for small defects inspection	3
Introduction to the selected papers from HES-2023 conference	3
Evaluation of the applicability of microwave nondestructive testing to crack detection on a pipe inner surface	3
Integrated control of deformation and vibration for plate under time-varying inertia force field	3
Electromagnetic wave representation as a superposition of the quantized vector potential field of single photons	2
Special issue on electromagnetic fields in mechatronics, computer sciences, electrical and electronic engineering	2
A benchmark problem for the verification of numerical calculation methods considering magnetic hysteresis	2
An optimization-aided approach to parametrize scalable models of induction machines in speed variable drives	2
A high efficiency impact force identification method based on non-convex sparse regularization	2
Calculation of mutual inductance between arbitrarily positioned planar spiral coils for wireless power applications	2
Research on transmission characteristics of sleeve type electromagnetic hybrid governor	2
Research on open-circuit fault diagnosis methods for parallel branches in open-end winding permanent magnet synchronous motors	2

Magnetic force calculation of circular permanent magnets with diametrical magnetization based on equivalent magnetizing current model	2
Analysis of position response characteristics of magnetic driven oil-free scroll compressor	2
An Improved PWM Control for Landing Velocity Reduction and Dynamic Performance Preservation in High Speed Solenoid Valve During Excitation Stage	2
Design of millimeter-wave waveguide bandpass filter for prototyping with 3D printer	2
In-situ measurement of tensile deformation-induced magnetic fields in high strength low alloy steels using GMR based metal magnetic memory technique	2
Design optimization of consequent-pole PMSM by ON/OFF method and multi-objective evolutionary algorithms	2
State-space model for induction motors with static eccentricity faults	2
Dual-mode sensor array for eddy current & capacitive NDE of FRP composites	2
Corrigendum to ‘resonant coil matrix shielding for dynamic WPT systems	2
Coupling analysis of shaking table and flexible centrifuge based on multibody dynamics	2
Design, implementation and control of physical series elastic actuated robotic manipulator	2
Optimal solution of PM synchronous motor obtained by gravitational search algorithm	2
Research on the online monitoring of metal oxide arrester based on genetic algorithm	2
Numerical simulation of intracerebral hemorrhage detection using magnetic induction spectroscopy	2
Large-stroke and high-precision coaxial integrated macro-micro composite actuator based on VCM and GMA	2
Magnetic hysteresis model using chained plays	2
Introduction to the special issue “Optimization and Inverse Problems in Electromagnetism”	2
Exploiting TFET-based technology for energy-efficient STT-MRAM cells	2
Comparative study of the welding performance of H-type coils in electromagnetic pulse welding of sheet metal	2
Efficient analysis of two-dimensional reconfigurable intelligent surfaces by characteristic basis functions	2
Erratum to: Ultrasonic unilateral double-position excitation lamb wave defect detection and quantification method for ground electrode of transmission tower	2
Differential tangential eddy current probe with dual induction for lift-off signal suppression	2
Research on multi-objective optimization of permanent mag-net brushless dc motors based on a grouped surrogate model with parameter correlation	2
Analysis of a CSRR-Based S-Band Microstrip Patch Structure for Sensor and Tunable Antenna Applications	2
Micromagnetic model analysis of dual field generation layer (FGL) spin torque oscillators (STO) for microwave-assisted magnetic recording (MAMR)	2
Experimental Consideration of Damping Effect According to Electromagnetic Position in Electromagnetic Guideway for Seamless Ultra-Thin Steel Plates	2
Effective length and soil surface voltage of grounding electrodes in causal-dispersive soils	2
Topology optimization of permanent magnet motors using Gabor filter	2
Research on an efficient optimization model for the design of PMSGs	2
Signal enhancement of rectangular wave eddy current testing via compensation using digital-to-analog converter	2
Design study of FIT dataflow machine for high performance 3-D electrostatic field simulation	2
Improvement of core loss model under AC–DC hybrid excitation and verification based on TEAM P21 extended model	2
A scheme of motor drive and control based on simultaneous wireless information and power transfer with tapped coil	2
Study of an additive manufacturing technology using pulsed inductive wire melting	2
Design and shape optimization of interior permanent magnet synchronous machine based on hybrid cores	2
Parameter identification of Bouc-Wen model for MR damper by parameter sensitivity analysis and modified PSO algorithm	2
Coupling of PSO and FE methods for electrical conductivity identification of materials used in eddy current separator	2
Design of coils for high-power medium-frequency transformers using Grain-Oriented hot cores	2
Optimization of a hybrid electromagnetic system with magnetic modulation	2
Metasurface Based Dual CP Antenna for S Band Communication	2
Numerical simulations of magnetic induction tomography system based on a 3D head model	2
Effect of shielding of eddy current probes on the sensitivity for sweep frequency measurements	2
Applicability of simulation-assisted probability of detection analysis considering multiple signal features to eddy current testing of weld	2
An electronic controllable permanent magnet coupler by setting coils on/off	2
Study of wind turbine blade fatigue testing based on electromagnetic compound excitation	2
Analysis of Can Loss Characteristics in Canned Induction Motors Based on the Poynting Vector	2
Efficient induction heating approach for rubber product manufacturing plates	2
Numerical calculation method of magnetization and eddy current by applying the subdomain method to integral equations	1
Multicoil torque modeling of reluctance spherical motor based on linear interpolation	1
Basic study on high precision positioning in electromagnetic valve drive system for improving internal combustion engine using linear actuator	1
Analysis of power-sizing equations for rotor-permanent-magnet flux-switching machines	1
3D-CNN frameworks for mesial temporal lobe epilepsy diagnosis in MRI images	1
Proposal of leak state mapping technology for water pipes using underwater pulse ECT technology	1
Synthesis of WPTS compensation networks considering multiple criteria	1
A neural network inverse problem solution for a MIMO magnetic levitation actuator	1
Multi-objective Optimization of Maglev Planar Motor Based on Halbach Array with Oblique Magnetization	1
Selective growth of metallic single-walled carbon nanotubes via the application of high magnetic fields of 10 T	1
Influence of Closed-Loop Vector Controller on Electromagnetic Characteristics of FS-PMSM with Rotor Eccentricity	1
A calibration method of ground-airborne frequency domain electromagnetic receving system based on magnetic source excitation	1
Compact rectifier array with extended RF input power range at 3.5 GHz	1
Research on direct-drive motor for wave energy conversion based on Halbach array	1
Proposal of defect inspection method of steel plate by full-wave rectified magnetic field	1
Simulation of power frequency high power electromagnetic coupling heater and analysis of influencing factors	1
A new quad-band polarization-insensitive metasurface for RF energy harvesting and its design optimization	1
Magneto-thermal and aerodynamic study of a toroidal transformer dimensioning	1
Modeling and Multi-field Simulation of a Self-Protecting Squeeze-Shear Magnetorheological Brake	1
Estimation of 28 GHz Band Wave Propagation using Machine Learning	1
Special Issue on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering	1
Study on static levitation and dynamic characteristics of diamagnetic levitation system	1
Incorporating aggregation trees in two-archive algorithm 2 for solving high dimensional multi-objective electromagnetic optimization	1
Damper force of a separated dual-chamber single-rod type damper using permanent magnet elastomer particles	1
Non-destructive evaluation of thermal embrittlement in cast stainless steel using eddy current testing	1
Forecasting top oil temperature for UHV reactor using Seq2Seq model with convolutional block attention mechanism	1
Nonlinear adaptive tracking control of piezoelectric bimorph actuator using hybrid modeling approach	1
Multi-objective cooperation optimization research on dynamic response and energy loss of high-speed solenoid valve for diesel engine injector	1
Single-structured zero-bias hybrid gas-magnetic bearing and its rotordynamic performance	1
The effect of excitation current on radial electromagnetic force wave of tangential magnetizing parallel structure hybrid excitation synchronous motor	1
Analysis of Two-dimensional Cogging Torque of Permanent Magnet Spherical Motor with Soft Magnetic Composite Material Core	1
Extraction of weak signal based on wire rope detection in timing belt of wind turbines	1
Multi-objective optimization of permanent magnet motor based on Improved Salp Swarm Algorithm and Spearman correlation	1

Introduction to the ISEM 2022 special issue	1
Analysis of the grain oriented electrical steel heterogeneities and their influence on the Epstein frame loss measurements	1
Research on the torque performance for two multi-pole bilayer magnetorheological fluid couplings	1
Evaluation of the detectability of flaws in a two layer structure: A simulation-based PoD study incorporating correlated variables	1
Study on unbalanced magnetic pull of permanent magnet toroidal motor with planet rotor eccentricity	1
Skin sarcoma stage detection using antenna resonant scale	1
Equivalent circuit of high frequency inductor to consider eddy currents and resonance	1
Qualitative evaluation of 3D printed materials’ structure using active infrared thermography and signal analysis based on LSTM neural networks	1
Time–Frequency Characteristics of Electromagnetic Force and Vibration in Synchronous Generator End Winding Consideration Load Variation	1
Quantitative comparison of low-cost electrical machines with soft magnetic composite and ferrite magnet materials	1
Performance Evaluation of Electromagnetic Safety Mechanisms Under Different Trigger Modes Based on Field-Circuit Coupling Model	1
A numerical model of parallel disc capacitor probe used in nondestructive dielectric permittivity evaluation by algebraic topological method	1
Numerical analysis of a (MnNiSi) 0.66 (Fe 2 Ge) 0.34	1
Study of magnetic nonlinearities in materials with low Curie temperature applied to domestic induction heating	1
A basic study on braking and regenerative braking torques for an axial gap type eddy current brake	1
Study on fluid friction loss on rotor surface of FeCo based high speed permanent magnet motor	1
Analytical modeling of surface-inset machines having harmonics injected into Halbach magnet shape with salient iron	1
Cost-effective optimal synthesis of the efficiency map of permanent magnet synchronous motors	1
Predicting of spatial electric field generated by substation switch operation based on AOS-GCN-LSTM Model	1
Toward efficient very low frequency wireless power transfer for EVs: From grid to battery	1
Ultra-broadband transmission absorption of the all-dielectric water-based metamaterial	1
Thickness evaluation of thermal barrier coating by using pulsed laser array spots infrared thermography	1
Design and Analysis of Four Element MIMO Antenna for Broadband Applications	1
A steady-state and dynamic response model for working characteristics prediction of the electromechanical transmission system including eddy-current magnetic coupler	1
Multi physical comprehensive design of a new type of FeCo based high speed permanent magnet motor	1
Assessment of thermographic tools for the validation of physics-based models of an induction sealing process	1
Collaborative optimization of multi-physical fields for composite electromagnetic linear actuators	1
Bending levitation control of flexible steel plate: Consideration of effect of magnetic properties on electromagnetically levitated steel plate vibration	1
Finite-time disturbance observer-based levitation control for vehicle-guideway coupling systems	1
Resonant coil matrix shielding for dynamic WPT systems	1
Imaging of subsurface defects with surface wave SAFT based on an array pickup EMAT	1
Design and analysis methods of a novel inductor with metamaterial core	1
Reconstruction schemes of load and constraint for global vibration evaluation of pipeline structures	1
Sensor based electromagnetic waves for unblocks clogged arteries	1
Nonlinear dynamic characteristics of two-dimensional micro-positioning workbench based on giant magnetostrictive actuators	1
Ensemble learning for monitoring process in electrical impedance tomography	1
Optimization design of laser-EMAT and its application in high-temperature forgings detection	1
Experimental study and load control of concentric electromagnetic damper under intensive impact load	1
Analysis on the low-frequency electromagnetic pulse coupling to horizontal electrically short lines	1
A fast modeling method for permanent magnet cylindrical eddy current brakes considering end effects	1
Numerical analysis of self-driven temperature-sensitive magnetic fluid heat flow around two side-by-side heating cylinders under a solenoidal magnetic field	1
Monte Carlo tree search applied to design of wireless power transfer system	1
A comparative study on the speed regulation methods of coaxial and axial magnetic gear modulated by magnetic field	1
Relationship between stress and magnetic signal of steel box girder based on magnetic memory method	1
In-situ hardness evaluation of hard-faced coatings through eddy current NDE	1
A low-cost approach to determine the optimum conductor plate thickness of linear permanent magnet eddy current brakes	1
Quantitative evaluation of corrosion in conductors under stress via GPEC	1
Output-only underdetermined modal parameters identification based on block term decomposition	1
Electrical compensation for deformed antenna arrays and its experimental verification	1
A novel grounding mode for enhancing current rating of AC submarine cables	1
Evaluation of magnetic properties of two kinds of permendurs by vector magnetic measurement	1
An investigation of dual-band frequency tunable microstrip antenna for 5G and GPS applications	1
Analysis of pole pair number impact on single-sided linear induction machine performances	1
Magneto-mechanical design of a high-speed machine for aeronautics	1
Numerical simulation of aircraft lightning attachment zone using the enclosing ball method	1
Incremental deep-learning approach for the optimal design of a class of IPM motor for electric vehicles	1
Four types of improved variable-reduction methods for solving asymmetric EFG-type saddle-point problem	1
Levitation behaviours of an eccentric SC-PM system with multi-degree-of-freedom motion	1
Position control based on Gaussian function applied on magneto-rheological fluid disc brake of a hybrid mechanical device (MR brake - DC motor)	1
Location identification of impact load on complex structure by combining transient statistical energy analysis with basis vectors	1
Topology optimization of asymmetric Interior permanent magnet motors using Gaussian basis function	1
Sensorless control of SPMSM based on an adaptive sliding mode observer with optimized phase-locked loop structure	1
Force and stiffness behavior of natural rubber based magnetorheological elastomer bushing	1
Shaft alignment for rotary machines using wireless power transfer process: Foundations and design approach	1
Length sizing of concrete rebar debonding by electromagnetic pulse-induced acoustic testing	1
Homogeneous single-coil induction heating achieved by structure design	0
Analysis and reduction of electromagnetic vibration in integral-slot PM machine by functional magnet structure	0
Topology optimization using combination of quantum-inspired computing and genetic algorithm	0
Study on electromagnetic force distribution and axial uniformity of tube electromagnetic bulging	0
Research on speed regulation method of high power magnetic gear	0
Antipodal UWB antenna with directivity for microwave tomography and reconfigurable design for biomedical applications	0
Magnetic-nanoparticle-embedded “wireless” hydrogel microvalve	0
Magnetic field sensor based on a low-frequency-tail spintronic diode	0
An efficient multi-objective optimization strategy for Halbach array permanent magnet synchronous machines based on nonlinear semi-analytical model	0
The Effect of Random Vibration on Performance of High-Speed Permanent Magnet Generator for Hydrogen Fueled Vehicle Turbocharged Drive Recovery	0
Electro-thermal modeling of an induction heating process of 42CrMo4 steel probe	0
IPSO algorithm-based spherical motor driving strategy via full factorial design method	0
Design and analysis of high power density permanent magnet-assisted synchronous reluctance motor	0
A hybrid dynamic hysteresis model based on the Preisach model and stacked auto-encoder	0
A hybrid spectral-spatial formulation for the calculation of the transient eddy-current response	0
Introduction to the ISEM 2023 Special Issue	0
Optimized fractal coils: Development of device modelling structure with artificial neural network	0
Core loss analysis of soft magnetic composite under non-sinusoidal excitation based on finite element models	0
Numerical Analysis Evaluation of Carburizing Depth Measurement Method for Surface Carburizing Steel Using AC Magnetic Field	0
A car wheel energy harvesting system regarded as a robotic kinematic chain system	0
Triple three-phase permanent magnet synchronous motor with shaped magnets for low vibration applications	0
Identification and characterization of damaged fiber-reinforced laminates in a Bayesian framework	0
Introduction to the special issue “Spintronics: Fundamental and applications”	0
Investigation of surface-inset Halbach machines with trapezoidal mixed grade magnets	0
Performance evaluation of homogenization techniques for proximity losses in PCB coils applied to inductive devices	0
Over-the-air testing of LTE-A PHY layer in reverberation chamber	0
Optimal design of hybrid consequent-pole permanent magnet motor to reduce torque ripple	0
The application of artificial intelligence and machine learning in the design process for electromagnetic devices	0
Formulations and Finite Element Discretization for Solving 2D Eddy Current Problems	0
Loss Experiment of Silicon Steel Sheet and Engineering Simulation Research on Loss Characteristic Model with Variable Parameters	0