Composites Part A-Applied Science and Manufacturing

Article	Citations
Experimental investigation on axial compression behavior of laminated bamboo lumber short columns confined with CFRP	179
Microstructural characterisation of fibre-hybrid polymer composites using U-Net on optical images	172
Bilayer dielectric composites with positive-ε and negative-ε layers achieving high dielectric constant and low dielectric loss	168
Continuous self-crimped micro-nanofiber via one-step electrospinning	144
Multiscale analysis of hierarchical flax-epoxy biocomposites with nanostructured interphase by xyloglucan and cellulose nanocrystals	138
BiVO4/MoO3 composites for ultra high performance energy-storing photocathodic protective coatings	138
Measurement of tensile and shear strength of interfacial bonding in fiber reinforced soft composites combining experiments and simulation	132
Improving mechanical and life cycle environmental performances of recycled CFRP automotive component by fibre architecture preservation	126
Multifunctional pressure/temperature/bending sensor made of carbon fibre-multiwall carbon nanotubes for artificial electronic application	118
Mechanical property enhancement of graphene-kenaf-epoxy multiphase composites for automotive applications	111
Ductile woven silk fibre thermoplastic composites with quasi-isotropic strength	108
Salt-template-assisted melt-processed porous poly (vinylidene fluoride) nanocomposites for highly efficient all-day passive radiative cooling	104
An analytical model for wrinkle-free forming of composite laminates	98
Design of polyimide/carbon nanotube@Ag@polyimide/graphene composite aerogel for infrared stealth and electromagnetic interference protection	94
Multiscale verification method for prediction results of mechanical behaviors in unidirectional fiber reinforced composites	94
Failure investigation of woven scarf-repaired laminates reinforced with nanoparticles: Experimental and numerical investigations	92
Interlaminar tensile strength of Alumina-Based Oxide/Oxide ceramic matrix composite at room temperature and 1200 °C using diametral compression test method	92
Characterization of thermomechanical properties and damage mechanisms using acoustic emission of Lygeum spartum PLA 3D-printed biocomposite with fused deposition modelling	88
Forming-behavior characterization of cross-ply carbon fiber/PA6 laminates using the bias-extension test	87
The use of digital thread for reconstruction of local fiber orientation in a compression molded pin bracket via deep learning	84
Effects of crosslinker concentration on curing process and performances of needled fiber preform reinforced phenolic aerogel composite using process simulation and comprehensive experiments	84
Strontium-Modified porous attapulgite composite hydrogel scaffold with advanced angiogenic and osteogenic potential for bone defect repair	83
Delamination behaviour and surface morphology of wholly thermoplastic composites using different ultra-high molecular weight thermoplastic fabrics with pristine and toughened Elium resin under Mode I	81
Facile engineering strategy to control polymer chain structure for enhanced dispersion, electrical and sensing properties of nanocomposites	81
Impact modification of wood flour reinforced PP composites: Problems, analysis, solution	81

3D structured graphene fluoride-based epoxy composites with high thermal conductivity and electrical insulation	78
Mesoscopically ordered Fe3O4/C nano-composite for superior broadband electromagnetic wave absorption	76
Combined effect of moisture and test temperature on the pseudo-ductility of thin-ply carbon/epoxy-glass/epoxy hybrid composites	76
High-temperature dielectric polymers with high breakdown strength and energy density via constructing the electron traps in blends	76
Quantifying effects of manufacturing methods on fiber orientation in unidirectional composites using structure tensor analysis	75
Enhanced thermal conductivity of phase change composites with novel binary graphite networks	75
Investigation into the effects of inter-ply sliding during double diaphragm forming for multi-layered biaxial non-crimp fabrics	75
Semi-analytical formulation of effective permeability of a dual scale unidirectional fabric	72
DIC study of strain concentrations and damage within web-flange junctions of pultruded GFRP bridge decking	72
Interlaminar toughening and self-healing mechanism for hard-and-soft layered composite laminates	71
Achieving superior low-temperature mechanical performances by nacre-like alternating microlayered structures in PP/POE-based pipes	70
Investigating the impacts of processing variability on tool-part interaction for interply-toughened aerospace composites using a novel shear technique	69
Construction of interface-engineered two-dimensional nanohybrids towards superb fire resistance of epoxy composites	69
Influence of water absorption on the interlaminar behavior of carbon fiber-reinforced composites containing halloysite nanotubes	68
Editorial Board	67
Characterisation of local damage in pultruded GFRP road bridge decks with random fibre mat misalignments	67
Cellulose nanofiber-introduced continuous-ramie yarn-reinforced polylactic acid filament for 3D printing: Novel fabrication process and mechanical properties	67
Pure bending of a continuous fiber array suspended in a thermoplastic polymer in the melt state	67
Editorial Board	66
Editorial Board	66
Electrospinning of bitter gourd shape CoNiSe2@N carbon nanofibers as absorbers for electromagnetic wave attenuation	66
Understanding the effect of hygroscopic cycling on the internal stress and stiffness of natural fibre biocomposites	65
Fatigue behaviour and damage mechanisms under strain controlled cycling: Comparison of Flax–epoxy and Glass–epoxy composites	64
Construction of compressible dual thermally conductive boron nitride network supported by Polyurethane@Polydopamine skeleton for improved thermal management performance	64
A macroscopic model of the compaction process during compression molding of carbon fiber sheet molding compounds	62
Effects of debulking on the fiber microstructure and void distribution in carbon fiber reinforced plastics	62
Editorial Board	62
Editorial Board	61
Influence of the glass transition of interlaminar particles on shear behaviour during cure of interlayer toughened thermoset composites	60
Editorial Board	59
Towards a virtual test framework to predict residual compressive strength after lightning strikes	59
An investigation into fatigue behaviour and damage progression in pseudo-ductile thin-ply angle-ply laminates	59
Manufacturing of thermoplastic composite sandwich panels using induction welding under vacuum	58
Composite temperature profile and tooling optimization via Deep Reinforcement Learning	58
Construction of zirconium tungstate modified polymer bonded energetic composites with highly inhibited thermal expansion via bioinspired interfacial reinforcement	58
Weak epsilon-negative silver nanowires/polyimide metacomposites with extremely low losses	57
Predicting fatigue damage in composites subjected to general loading conditions	57
Dynamic behaviour of Bio-inspired heterocyclic aramid Fibre-reinforced laminates subjected to Low-velocity Drop-weight impact	57
Nonlinear static and dynamic response prediction of bidirectional doubly-curved porous FG panel and experimental validation	56
Silver nanowires decorated recycled cigarette filters based epoxy composites with high through-plane thermal conductivity and efficient electromagnetic interference shielding	55
Gauge length and temperature influence on the tensile properties of stretch broken carbon fiber tows	55
Particle morphology dependence of the mechanical and electrical properties in the in-situ graphene reinforced Cu matrix composites	55
In situ preparation of light-driven cellulose-Mxene aerogels based composite phase change materials with simultaneously enhanced light-to-heat conversion, heat transfer and heat storage	55
Synergetic effect of O-POSS and T-POSS to enhance ablative resistant of phenolic-based silica fiber composites via strong interphase strength and ceramic formation	55
Enhanced vibration damping and viscoelastic properties of flax/epoxy composites and their carbon fibre hybrid laminates	55
On the Mode II fracture toughness, failure, and toughening mechanisms of wholly thermoplastic composites with ultra-lightweight thermoplastic fabrics and innovative Elium® resin	54
Thermoelastic deformation of geometries of double curvature due to anisotropic shrinkage	54
Platen parallelism significance and control in single fiber transverse compression tests	54
A novel strategy in micomechanics modeling of silica fibrous ceramics considering morphology-related sintering effects	54
Effect of atomic oxygen exposure on polybenzoxazine/POSS nanocomposites for space applications	53

Effects of thermal shock on the microstructure, mechanical and thermophysical properties of ZrC-C composites	53
Functionalizing chitosan-based film with highly sensitive fire response and commendable flame retardancy for intelligent fire-alarm system	53
Interfacial engineering strategy to improve the piezoresistive performance of polymer nanocomposites via chemical bonding of carbon nanotubes on graphene	53
Experiments and simulations for dynamic yarn pull-out response of Kevlar® fabrics	52
Impact of flax fibre micro-structural features on composite damage observed through micro-CT characterisation	52
Effects of cellular crossing paths on mechanical properties of 3D printed continuous fiber reinforced biocomposite honeycomb structures	52
Properties of shape memory polyimide composites with continuous “brick-and-mortar” layered structure: High flame retardancy, ablation resistance, and high mechanical properties	52
A review on three-dimensional stitched composites and their research perspectives	51
Robust flexural performance of modified bamboo through strategic delignification and carboxymethyl cellulose modification	51
A parameterised and integrated modelling method for plain-weave composite preform of a component with complex geometry	51
A review on the tooling technologies for composites manufacturing of aerospace structures: materials, structures and processes	51
A novel equivalent method for crashworthiness analysis of composite tubes	50
Biomass-derived carbon decorated with Ni0.5Co0.5Fe2O4 particles towards excellent microwave absorption performance	50
Hybrid additive manufacturing of polymer composites reinforced with buckypapers and short carbon fibres	50
Strength and healing efficiency of helicoidal carbon fiber reinforced thermoplastic laminates	50
Improved thermal conductivity and mechanical property of mercapto group-activated boron nitride/elastomer composites for thermal management	49
Investigations on thermoforming of carbon fiber reinforced epoxy vitrimer composites	49
Electric-magnetic-dielectric synergism and Salisbury screen effect in laminated polymer composites with multiwall carbon nanotube, nickel, and antimony trioxide for enhancing electromagnetic interfere	49
A copper organic phosphonate functionalizing boron nitride nanosheet for PVA film with excellent flame retardancy and improved thermal conductive property	49
Crack healing in infusible thermoplastic composite laminates	49
Dense and continuous networks of aerial hyphae improve flexibility and shape retention of mycelium composite in the wet state	49
Quasi-static indentation and acoustic emission to analyze failure and damage of bio-composites subjected to low-velocity impact	48
Upgrading the pore-size scale of MIL-53 from microporous to macroporous for adsorbing triethyl phosphate and reducing the fire risk of polystyrene	48
Toughening adhesive joints through crack path engineering using integrated polyamide wires	48
Fibers of thermoplastic polymer blends activate multiple interlayer toughening mechanisms	48
Introduction of the developable surface concept in fibrous composite materials	48
Insight into mycelium-lignocellulosic bio-composites: Essential factors and properties	47
The propagation of fibre–matrix interface debonding during CFRP edge milling process with the multi-teeth tool: A model analysis	47
Linear Viscoelasticity of Bio-based Composites of Polylactic Acid and Regenerated Cellulose Fibers: Modeling and Experimental Validation	46
Vitrimer-like, mechanically Robust, healable and recyclable biobased elastomers based on epoxy natural Rubbers, polylactide and layered double hydroxide	46
In-plane and out-of-plane deformations in automated fiber placement employing micromechanics method	46
Ultrasensitive, flexible and dual strain-temperature sensor based on ionic-conductive composite hydrogel for wearable applications	46
Carbon Fiber-Reinforced Piezoelectric Nanocomposites: Design, Fabrication and Evaluation for Damage Detection and Energy Harvesting	46
Ultrasound and H2O assisted scCO2 foaming technology for preparation of PS/PMMA composite foams with ultra-lightweight and super thermal-insulation	46
Intumescent closed-cell porous molecular engineering towards high flame retardancy and ultra-low smoke release epoxy resin	45
Crack growth study of wood and transparent wood-polymer composite laminates by in-situ testing in weak TR-direction	45
Heating De-fluorination derived radicals promoted interfacial grafting and enhanced Kevlar/Bismaleimide composites	45
Multiscale thermo-mechanical analysis of cure-induced deformation in composite laminates using Direct FE	45
High performance porous Ni@Cf paper with excellent electromagnetic shielding properties	45
Acoustic performance of epoxy-based composites incorporating fluorescent single-walled carbon nanotubes	45
Design of Kagome lattice composite sandwich metastructures with high load bearing and low frequency vibration reduction properties	45
Healing study of poly (ether-imide) and poly ether ether ketone using resin films and a parallel plate rheometer	44
Theoretical analysis of phase transition behavior of ALCP/CNT nanocomposites interface by photo and thermal stimulation	44
Resource-efficient manufacturing process of composite materials: Fibrillation of recycled textiles and compounding with thermoplastic polymer	44
Effect of scale morphology on the mechanical response of bio-inspired fish-scale-based protective structures	44
Effect of wettability and textile architecture on fluid displacement and pore formation during infiltration of carbon fibrous preforms	44
PEDOT:PSS and AgNW synergistically contributed high electromagnetic shielding performance for polyurethane-based composite coating	44
3D printed carbon based all-dielectric honeycomb metastructure for thin and broadband electromagnetic absorption	44
GFRP biocomposites produced with a novel high-performance bio-based unsaturated polyester resin	43
Ice-templated graphene in-situ loaded boron nitride aerogels for polymer nanocomposites with high thermal management capability	43
Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase – Part II: Mechanical and electrical properties of carbon nanotube coated car	43
High-performance flexible polyurethane from renewable castor oil: Preparation, properties and mechanism	43
Novel processing strategy and challenges on whisker-reinforced ceramic matrix composites	43
Microstructure of PyC dominates interfacial shear failure in SiCf/SiC composites: From localized sliding to uniform plasticity	43
Advanced analysis of the bias-extension of woven fabrics with X-ray microtomography and Digital Volume Correlation	43
Key role of interphase in continuous fiber 3D printed ceramic matrix composites	43
Scalable, efficient piezoelectric wood nanogenerators enabled by wood/ZnO nanocomposites	43
Using in-situ conversed nano SiC to bond UHTC particles and construct anti-ablation coating	42
Achieving remarkable enhancement on electromagnetic shielding performance in multi-walled carbon nanotube/polydimethylsiloxane composites via adding a small amount of metal micro-particles as scatteri	42
Alkyl thiol grafted silver nanoparticle–decorated cellulose nanocrystals on poly(lactic acid) composites for enhanced antibacterial activity and toughening effects	42
Carbon nanotubes and carbon nanofibers based co-continuous thermoplastic elastomeric blend composites for efficient microwave shielding and thermal management	41
Experimental and numerical analysis of eddy current sensor signal induced by out-of-plane fiber waviness in carbon fiber composites	41
Layered ultra-lightweight MXene based composite films for current conduction	41
Programmable, biodegradable composite scaffolds with variable pore morphology for minimal invasive bone repair	41
Influence of ozone functionalization of carbon nanotubes on the fracture toughness improvement of polymer nanocomposites: A multiscale study	41
Nickel foam encapsulated phase change composites with outstanding electromagnetic interference shielding and thermal management capability	41
MoSe2 nanosheets decorated Co/C fibrous composite towards high efficiency electromagnetic wave absorption	40
Novel micro-nano PBO composite paper with unprecedented mechanical properties and heat resistance	40
Tracking consolidation of out-of-autoclave prepreg corners using pressure sensors	40
A three-dimensional plastic-damage model for polymer composite materials	40
In-situ synthesis of phosphorus-doped graphene paper with adenosine triphosphate and its application for intelligent fire warning	40
Inline tape width control for thermoplastic automated tape layup	39
A review on self-reporting mechanochromic composites: An emerging technology for structural health monitoring	39
Temporal enhanced Ultrasound: A new method for detection of porosity defects in composites	39
Interpenetrating phase composite graded lattice structure integrated with load-bearing and sensing capabilities	39
Origami tunable frequency selective fabric and its tuning mechanism	39
Nanoarchitectonics of integrated impedance gradient MXene/PPy/polyester composite fabric for enhanced microwave absorption performances	39
In-situ fabrication of polyimide microphase and its effects on the mechanical and dielectric properties of polytetrafluoroethylene composite films	38
Graphene/polyurethane nanocomposite coatings – Enhancing the mechanical properties and environmental resistance of natural fibers for masonry retrofitting	38
A model for the consolidation of hybrid textiles considering air entrapment, dissolution and diffusion	38

A metal-based microencapsulated phase change material (MEPCM) with high thermal reliability and its performance regulation	38
Cryogenic mechanics and damage behaviors of carbon fiber reinforced polymer composites	38
Multifunctional MXene-coated cotton fabric with enhanced thermopower for smart fire protection	38
Flame-retardant aramid fabric with durable, self-cleaning, hydrophobic, and tunable electromagnetic interference shielding properties	38
Development of high-temperature wave-transparent nitride-based CFCMCs for aircraft radomes	38
Thermal-insulation and ablation-resistance of Ti-Si binary modified carbon/phenolic nanocomposites for high-temperature thermal protection	38
Shear deformation characteristics under tensile stress during forming of tubular braided fabrics	38
Mode I interlaminar fracture toughness of two-dimensional continuous fiber reinforced ceramic matrix composites using wedge-loaded double cantilever beam method	38
Interfacial diffusion behaviour and mechanical properties of SiC/Ta hybrid accident tolerance fuel cladding structure	38
In situ study on the hierarchical interfacial “global regulation – equilibrium iteration” bearing-toughening mechanisms in Strombus gigas shell by synchrotron radiation computed tomography technique	38
Improved fibre placement in filament-based 3D printing of continuous carbon fibre reinforced thermoplastic composites	38
Prolonging structural integrity—Fatigue of scarf repairs for wind turbine blade shell applications	38
Wet-spun flexible carbon nanotubes/polyaniline fibers for wearable thermoelectric energy harvesting	37
Mechanical properties of magneto-sensitive shear thickening fluid absorber and application potential in a vehicle	37
Exploring the morphology of flax fibres by X-ray microtomography and the related mechanical response by numerical modelling	37
Synergistic impact of ionic liquid on interfacial interaction and viscoelastic behaviors of silica filled nitrile butadiene rubber nanocomposites	37
Nanoscale digital image correlation at elementary fibre/matrix level in polymer–based composites	37
Thermal response and pyrolysis behavior of carbon fiber/phthalonitrile composites under one-sided butane flame heating: Experimental and numerical analysis	37
ZIF-67/CMC-derived 3D N-doped hierarchical porous carbon with in-situ encapsulated bimetallic sulfide and Ni NPs for synergistic microwave absorption	37
Controlled metoprolol tartrate release from poly(ε-caprolactone)-poly(ε-caprolactone)/polyethylene oxide/metoprolol tartrate composites with alternating multi-layered structures prepared through layer	37
Electrical properties of 3D printed continuous carbon fibre composites made using the FDM process	37
Polyimide composite aerogels towards highly efficient microwave absorption and thermal insulation	36
Doping, directional densification-stretching to reconstruct high performance CNT composite yarns for stretchable conductors	36
Superior flexural, interlaminar- shear and fracture performance of glass fiber/epoxy laminates employing 3-D reinforcement approach: Emphasis on through thickness functionalized CNT alignment	36
New approach for electric vehicle composite battery housings: Electromagnetic shielding and flame retardancy of PUR/UP-based sheet moulding compound	36
Ternary-channel porous composite textiles for effective cooling	36
Effect of aging on the fatigue crack growth properties of carbon-polyamide 6 thermoplastic composites using the multi ΔG-control method	36
The role of cavitation in the toughening of elastomer nanocomposites reinforced with graphene nanoplatelets	36
Enhanced interlaminar fracture toughness of unidirectional CFRP laminates with tailored microstructural heterogeneity of toughening layer	36
Advanced thermoplastic polyurethane/hexagonal boron nitride thermal conductors via elongational flow from the aspect of experiment and simulation	36
Thermally conducting yet electrically insulating epoxy nanocomposites containing aluminum@electrochemically exfoliated graphene hybrid	36
Raman spectroscopy used for estimating the effective elastic modulus of carbon nanotubes in aligned multi-walled carbon nanotubes/ epoxy composites under tensile loading	36
Efficient sublaminate-scale impact damage modelling with higher-order elements in explicit integration	36
Breathable, durable and bark-shaped MXene/textiles for high-performance wearable pressure sensors, EMI shielding and heat physiotherapy	36
PEG-filled kapok fiber/sodium alginate aerogel loaded phase change composite material with high thermal conductivity and excellent shape stability	35
Experimental characterization of CFRP single lap joints under tension at various loading rates	35
Real-time evaluating temperature-dependent interfacial shear strength of thermoplastic composites based on stress impedance effect of magnetic fibers	35
Multifunctional two-way shape memory RGO/ethylene-vinyl acetate composite yarns for electro-driven actuators and high sensitivity strain sensors	35
Facile construction of three-dimensional porous netlike reduced graphene oxide/zinc oxide composite aerogels as the lightweight, flame retardant, compression resilience and high-performance electromag	35
Performance of painted and non-painted non-woven nickel-coated carbon fibers for lightning strike protection of composite aircraft	35
Controllable construction of CNT-Interconnected liquid metal networks for thermal management	35
Ultra-high temperature graphitization of three-dimensional large-sized graphene aerogel for the encapsulation of phase change materials	35
Implementation of a viscoelastic material model to predict the compaction response of dry carbon fiber preforms	35
Scalable-manufactured and mechanical-robust superhydrophobic hierarchical material toward self-cleaning passive cooling	35
Flax fiber treatment by an alkali solution and poly(dopamine) coating: Effects on the fiber physico-chemistry and flax/Elium® composite interfacial properties	34
Triple-shape memory polybenzoxazine resins and their composites	34
Ballistic performance of bio-inspired hybrid interleaved composite structures suitable for aerospace applications	34
Clarifying the mechanisms of edge glow generation in CFRP laminates exposed to simulated lightning currents	34
Resistance-welded thermoset composites: A Bayesian approach to process optimisation for improved fracture toughness	34
Infrared-thermography measurement of temperature distribution in carbon fiber–reinforced polypropylene during ultrasonic welding	34
A comprehensive experimental and modeling study of the strain rate- and temperature-dependent deformation behavior of bio-degradable Mg-CeO2 nanocomposites	34
Modified Fourier Transform Misalignment Analysis multi-rotate method for measuring fibre alignment in stitched glass fabrics	34
Characterization and computational modeling of continuous-fiber prepreg ply-ply interaction behavior	34
Anisotropy behavior of liquid metal elastomer composites with both enhanced thermal conductivity and crack resistance by direct ink writing	34
Piecewise damage model for SiC/SiC composites with multilevel experimental validation	34
Improving carbon fibre reinforced polyphenylene sulfide using amine and phenolic interphase modifications	34
A simple stress-based failure criterion for predicting unfolding failure	33
Effect of strain rate on the in-plane orthotropic constitutive response and failure behaviour of a unidirectional non-crimp fabric composite	33
Tailoring adherend surfaces for enhanced bonding in CF/PEKK composites: Comparative analysis of atmospheric plasma activation and conventional treatments	33
Development of a novel flax soy-based polyurethane prepreg composite	33
Layer-by-layer nanoarchitectonics of graphene/polybenzimidazole functional composite film with excellent photo-thermal behavior and low electrical conductivity	33
Novel bio-based nanosheets: Improving the fire safety, electromagnetic shielding and mechanical properties of polylactic acid	33
Preparation of a water-based carboxylated Poly(phthalazione ether nitrile) sizing agent for interfacial reinforcement of CF/PPESK composites	33
Direct electrospinning of short polymer fibers: factors affecting size and quality	33
Repurposed Discontinuous Fiber Composites for industrial applications: Effects of average number of platelets through the thickness, platelet length, and hybridization on flexure properties	33
Mechanical and interfacial analysis of 3D-printed two-matrix continuous carbon fibre composites for enhanced structural performance	32
Preparation of deep eutectic solvents based on metal ions and their influences on reinforcement and strain softening behaviors of silica filled natural rubber nanocomposites	32
Construction of interfacial interlocking structure in epoxy composites with enhanced mechanical performance and ultraviolet resistance	32
MXene bridging graphite nanoplatelets for electrically and thermally conductive nanofiber composites with high breathability	32
Impact behaviour of 3D printed fiber reinforced cementitious composite beams	32
Continuous tow shearing for the automated manufacture of defect-free complex 3D geometry composite parts	32
Preparation of cellulose-paraffin composite foams by an emulsion–gelation method using aqueous inorganic salt solution for thermal energy regulation	32
Progressive damage modeling in open hole composite laminates with ultrasound-informed drilling-induced delamination	32
Ultrahigh discharge efficiency and improved energy density in polymer-based nanocomposite for high-temperature capacitors application	31
An efficient finite element mesh generation methodology based on μCT images of multi-layer woven composites	31
Enhancement of fiber–matrix adhesion in carbon fiber reinforced Al-matrix composites with an optimized electroless plating process	31
Assessing the impact of accelerated weathering on the mechanical properties of a flax/epoxy composite: A study on tensile performance and drop-weight impact	31
PMDI cross-linked rare earth/liquid metal reinforced ANF/MXene membranes for multifunctional electromagnetic interference shielding	31
Influence of physical ageing and fibre proximity on the local mechanical response of the Elium® thermoplastic composite matrix	31
Improving the performance of pseudo-ductile hybrid composites by film-interleaving	31
Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber–matrix interphase − direct observations of the fiber–matrix interphase by SEM and TEM	31
Preparation and electromagnetic waves absorption performance of hibiscus-like CuS/SiC NWs@PANI in the GHz band	31
Mussel-like carbon fiber/MnO2 nanosheet heterostructures for mechanically strong carbon fiber/polyamide composites with excellent electromagnetic interference shielding	31
High-performance hybrid glass fibre epoxy composites reinforced with amine functionalised graphene oxide for structural applications	31
3D Graphene – sponge skeleton reinforced polysulfide rubber nanocomposites with improved electrical and thermal conductivity	31
An experimental study of defect evolution in corners by autoclave processing of prepreg material	30
Flexible MXene-coated melamine foam based phase change material composites for integrated solar-thermal energy conversion/storage, shape memory and thermal therapy functions	30
Modelling of size-dependent plasticity in polymer-based composites based on nano- and macroscale experimental results	30
Discontinuous interleaving strategies for toughening, damage sensing and repair in multifunctional carbon fibre/epoxy composites	30
Lubricious yet tough fabric composites at cryogenic temperature by sulfonated polyether-ether-ketone reinforcement	30
Effect of fiber misalignment on bending strength of pultruded hybrid polymer matrix composite rods subjected to bending and tension	30
Dynamic analysis of scarf adhesive joints in CFRP composites modified with Al2O3-nanoparticles under fatigue loading at different temperatures	30
Electrospun fibrous materials and their applications for electromagnetic interference shielding: A review	30
Bayesian inversion algorithm for estimating local variations in permeability and porosity of reinforcements using experimental data	30
An evaluation of the influence of manufacturing methods on interlocked aluminium-thermoplastic composite joint performance	30