OOIR: Observatory of International Research

Papers

(The median citation count of Journal of Oral Science is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)

Article	Citations
Sixth cranial nerve palsy and trigeminal neuropathic pain due to a space-occupying lesion	28
Association between a past history of nausea and vomiting during pregnancy and fever after the BNT162b2 COVID-19 vaccination	24
Comparison of measured blood pressure levels, hypertension history, oral diseases, and associated factors among Thai dental patients	22
Effect of firing temperature on the interface between 3Y-TZP zirconia and porcelain	22
Reactive oxygen species generation required for autophagy induction during butyrate- or propionate-induced release of damage-associated molecular patterns from dying gingival epithelial Ca9-22 cells	21
<i>In vitro</i> biocompatibility testing of different base materials used for elevation of proximal subgingival margins using human gingival epithelial cells	19
Effect of precipitate formation in the root canal on the accuracy of electronic apex locators	16
A novel cone-beam CT scanning technique for measuring periodontal soft tissues in the esthetic area	15
Coronal and apical leakage among five endodontic sealers	15
Gingival crevicular fluid microRNA associations with periodontitis	14
Insulin facilitates synaptic transmission via gap junctions between fast-spiking interneurons in the rat insular cortex	13
Association of second-hand smoke exposure, quantified by salivary cotinine, with dental caries in Japanese adolescents	13
Assessment of a highly-filled flowable composite for the repair of indirect composites	11
Analysis of external nasal morphology and the direction of maxillary repositioning following Le Fort I osteotomy	11
Usefulness of conventional glass ionomer cements in an environment of insufficient moisture exclusion	10
Effect of nonthermal argon plasma treatment on the surface properties and phase transformation of zirconia	10
Effect of sintering temperature on crystal structure, optical and thermal properties, and surface roughness and topography of nanolithium disilicate and zirconia-reinforced nanolithium silicate cerami	10
A pilot study to test the validity of a piezoelectric intra-splint force detector for monitoring of sleep bruxism in comparison to portable polysomnography	9
Impact of psychological states on periodontitis severity and oral health-related quality of life	9
The 3-year cumulative survival rates of posterior monolithic zirconia crowns and their antagonist teeth, and their influencing factors	8
Three-year survey of oral hygiene conditions of Cambodian public primary school children	8
Influence of a die spacer on the fit and load to failure of cantilever resin-bonded fixed dental prostheses	8
A study of mandibular premolar root and canal morphology in a Black South African population using cone-beam computed tomography and two classification systems	8
Effectiveness of curcumin-based antimicrobial photodynamic therapy against <i>Staphylococcus aureus</i>	8
A case of skeletal maxillary protrusion with high angle and gummy smile treated with anchor screws	8

Nuclear localization of propiece IL-1α in HeLa cells	8
Current complications and issues of implant superstructure	8
Possible roles of short-chain fatty acids produced by oral bacteria in the development of alveolar osteitis	8
Gender and age effects on dental and palatal arch dimensions among full siblings	7
Translation and validation of an ageism scale for dental students in Switzerland	7
Apically extruded debris, canal transportation, and shaping ability of nickel-titanium instruments on contracted endodontic cavities in molar teeth	7
The relationship between the Cbm and Cnm genes in <i>Streptococcus mutans</i> isolated from arches and brackets of patients and antibiotic resistance profiles	7
Butyric acid modulates periodontal nociception in <i>Porphyromonas gingivalis</i>-induced periodontitis	7
Efficacy of the HBW Ultrasonic Ring for retrieval of fragmented manual or rotatory instruments	6
Effect of graphene oxide on the biaxial flexural strength and translucency of ultrathin monolithic zirconia	6
Distribution of main occluding area and associated factors in adolescents	6
Aging resistance of highly translucent zirconia ceramics with rapid sintering	6
Characteristics of dental materials in the oral cavities of Asian individuals between their 20s and early 40s living temporarily in Japan based on 38 case studies	6
Measurement of ultrasonic echo intensity predicts the mass and strength of the tongue muscles in the elderly	6
The bactericidal and biofilm removal effect of super reducing water on <i>Streptococcus mutans</i> in three types of orthodontic brackets	6
Biofilm accumulation on additive manufactured Ti-6Al-4V alloy surfaces	6
Three-dimensional analysis for detection of pulp stones in a Saudi population using cone beam computed tomography	6
Surface degradation and biofilm formation on hybrid and nanohybrid composites after immersion in different liquids	6
Influence of inner crown thickness on the bonding strength of porcelain fused to Co-Cr alloy endocrown	6
Utilization of a mask fitter or micropore tape to improve the fit of a surgical mask	6
Biological and physical properties of calcium hydroxide-based pulp-capping materials and their modifications	5
Influence of vat polymerization methods on surface and bonding behavior of additive manufactured dental resins	5
Synergistic effects of reduced graphene oxide on the antibacterial activity of calcium hydroxide-based intracanal medicaments containing different vehicles	5
Occlusion of dentinal tubules on periodontally involved teeth by dentifrice containing stannous fluoride and sodium fluoride	5
Carbonate apatite increases gene expression of osterix and bone morphogenetic protein 2 in the alveolar ridge after socket grafting	5
Effects of root contact length on the failure rate of anchor screw	5
Measurement of the mandibular canal and mandibular incisive canal using cone beam tomography in adults from South Brazil	5
A single-center prospective pilot open-label study to assess the efficacy of topical application of an oxygen-enriched oil for the treatment of angular cheilitis	5
Current status on antimicrobial activity of a tricalcium silicate cement	5
Usefulness of the masticatory score by occlusal support	5
Radiation attenuation properties of materials used to fabricate radiotherapy prostheses <i>in vitro</i> study	4
Efficacy of antiseptics for rubber dam sterilization prior to endodontic treatment	4
Evaluation of machine-assisted irrigation on removal of intracanal biofilm and extrusion of sodium hypochlorite using a three-dimensionally printed root canal model	4
Effect of intra-radicular cleaning protocols after post-space preparation on marginal adaptation of a luting agent to root dentin	4
Current educational concepts and techniques related to impression making of removable complete dentures	4
Age differences in pain sensitivity and effect of topical lidocaine on the tongue in healthy female subjects	4
Effectiveness of silicone mask fitters for reduction of diffuse composite dust leakage during removal of bonded attachments for clear aligners	4
Impact of erosive and abrasive wear on the surface characteristics of hybrid ceramic-polymer dental materials	4
Reduction of cervical vertebra ghost images in panoramic radiography using vertical dual exposure	4
Polymethyl methacrylate resin for provisional restoration affects rat macrophage function in <i>in vitro</i> conditions	4
Effect of bleaching on the color match of single-shade resin composites	4
Students’ perception of digital waxing software for dental anatomy education	4
Association of overtime work duration with oral health-related quality of life in Japanese workers	4
Concentration-dependent effect of carboxymethyl chitosan amorphous calcium phosphate on the surface hardness of primary tooth enamel	4
Amount of toothpaste used by dental students	3
Effect of sitting posture with and without sole-ground contact on chewing stability and masticatory performance	3
Influence of casein phosphopeptide-amorphous calcium phosphate on the surface topography and composition of nickel-titanium archwires during orthodontic treatment with fixed appliances	3
Cell viability and physicochemical effects of different concentrations of bismuth trioxide in a mineral trioxide aggregate cement	3
Masticatory performance with one missing molar	3
Correction of intraoral radiography with dual imaging plates using enlargement of the horizontal direction with division into 12 blocks	3

A double-blind randomized clinical trial of Brazilian red propolis dentifrice efficacy in orthodontic patients	3
Metal component of dental restorations and fixed prostheses in the oral cavity of 43 cases of adults aged 55 years or older in forensic autopsy	3
An <i>in vitro</i> study of digital impressions and three-dimensional printed models of orbital defects using mobile devices and monoscopic photogrammetry	3
Sociodemographic profiles and career motivations of Australian dental students	3
A comparative study of two chemical models for creating subsurface caries lesions on aprismatic and prismatic enamel	3
Preoperative oral hygiene treatment reduces bacterial transport and colonization during intubation for orthopedic surgery	3
Primordial odontogenic tumor with prominent calcifications	3
Clinical performance of two onlay designs for molars after root canal treatment	3
Effects of sintering protocols, yttria content, and zirconia thickness on the optical properties of monolithic zirconia	3
Relationship between severity of periodontitis and oral health-related quality of life in Korean adults	3
Tooth extraction prior to radiotherapy for oropharyngeal cancer increases the risk of osteoradionecrosis	3
Effects of storage time and restoration depth on instrumental color adjustment potential of universal resin composites	3
Geraniol and thymoquinone inhibit Candida spp. biofilm formation on acrylic denture resin without affecting surface roughness or color	3
Effect of surface treatment, ferrule height, and luting agent type on pull-out bond strength of monolithic zirconia endocrowns	3
Effect of coffee roasting level on tooth discoloration	3
Case report of a patient with mandibulectomy followed up for 11 years	3
Vertical magnification correction in vertical dual-exposure panoramic radiography	3
Antimicrobial potential and biological properties of modified glass-ionomer cement supplemented with chlorhexidine diacetate	3
Thermal effects on the optical properties of dental composite resins and glass ionomer cements in forensic contexts	3
Effects of tetrabutylammonium dihydrogen trifluoride etchant on bond strengths of resin composites with Ti-6Al-4V and Co-Cr alloys	3
Importance of anti-centromere antibodies in the diagnosis of Sjögren’s syndrome	2
A new phenotype identification method with the fluorescent expression in cross-sectioned tails in <i>Thy1</i>-GCaMP6s transgenic mice	2
Effect of build orientation on the trueness of occlusal splints fabricated by three-dimensional printing	2
Thermal and volumetric assessment of endodontic filling techniques using infrared thermography and micro-CT	2
Effects of maxillofacial prosthetic treatment on oral health-related quality of life and masticatory ability of patients with head and neck tumors	2
Usefulness of an occlusal force device incorporating a microcomputer	2
Clinical application of an intraoral scanner and CAD/CAM system for a Kennedy class I partially edentulous patient	2
Analysis of reaction products on hydroxyapatite created by tooth etchants with different compositions	2
Touch-cure activation by marketed universal resin luting cements of their associated primer to dentin	2
Clinical success of vital pulp therapy for pulp-exposed permanent teeth: a systematic review and meta-analysis	2
Assessment of immediate clotting after flapless extraction using piezosurgery or turbine handpiece in patients receiving dual antiplatelet therapy	2
Use of micro-computed tomography and scanning electron microscopy with energy-dispersive spectroscopy to distinguish natural white spot enamel lesions from sound enamel in human premolars	2
Effect of substrate on the response of 3-dimensional periodontal ligament tissue to compressive stimulation	2
A case of sclerosing odontogenic carcinoma of the mandible with a review of the literature	2
Prolonged blockade of the cervical sympathetic nerve by stellate ganglion block accelerates therapeutic efficacy in trigeminal neuropathy	2
Effect of thickness on the degree of conversion, monomer elution, depth of cure and cytotoxicity of bulk-fill composites	2
A survey of oral health status, subjective oral symptoms and oral health behaviors among first-year dental students at a Japanese university	2
Influence of resin and matrix systems on the three-dimensional geometry of reproduced proximal surfaces in Class II resin restorations of primary molars	2
Effective utilization of digital technology in complete denture fabrication	2
Elemental composition, corrosion resistance and mechanical properties of computer-aided design and computer-aided manufacturing fixed retainers versus conventional fixed retainers	2
Monomer release, cell adhesion, and cell viability of indirect restorative materials manufactured with additive, subtractive, and conventional methods	2
Correlation between <i>Streptococcus mutans</i> levels in dental plaque and saliva of children	2
Orthodontic tooth movement following bone regeneration with modified bone graft materials treated with a biosilane coupling agent	2
Relationship between vertical hyoid bone position and swallowing function in older adults	2
Novel method for using a single impression and additive technologies to fabricate a metal post and core and metal coping	2
Factors related to sharps injuries among students in a dental laboratory	2
Effects of different types of molds on the color difference, translucency, surface roughness, and hardness of a maxillofacial silicone elastomer	2
The effect of ultrasonic vibration protocols for cast post removal on the incidence of root dentin defects	2
Alteration of monoaminergic systems in the caudal medulla and its possible link to diurnal increase of apnea in a mouse model of Rett syndrome	2
Investigation of mandibular second molar root and canal morphology in a Black South African population using cone-beam computed tomography and two classification systems	2
Reduction of saliva-derived droplet diffusion by mouth-closed tooth brushing in the era of COVID-19	2
Radiological and histochemical study of bone regeneration using the costal cartilage in rats	2
Combined impact of COVID-19 and renal failure on taste perception in a sample of the Egyptian population	2
Novel vinegar solution for denture-cleansing agent	2
Comparison of the plaque-removal efficacy of ultra-soft single-headed, triple-headed, and T-shaped toothbrushes and the subjective perceptions of users	2