Tehnicki Vjesnik-Technical Gazette

Article	Citations
The Performance Improvement of MMC-DFIM Drives using Hybrid Jellyfish-Butterfly Optimized FOPID Control	21
Deformation Behaviour and Energy Absorption of 3D Printed Polymeric Gyroid Structures	20
Fuzzy Multi-Objective Structural Optimization Design of Reducer Housing for Oil Tea Fruit Shelling Machine	18
Machine Learning Approach to Predict the Effect of Metal Foam Heat Sinks Discretely Placed in a Cavity on Surface Temperature	16
Novel Ten-Port MIMO Antenna with Enhanced Polarization Diversity for 5G Applications	15
Influence of Communication Channel and Information Form on Consumers' Purchase Behaviour	10
Adaptive Energy Efficient Routing for Video Transmission in Wireless Multimedia Sensor Network Using Greedy Algorithm	10
A Low-Cost Plasma Spectroscopy Instrument Design	10
Investigation of the Effect of Surface Burnishing on Stress Condition and Hardening Phenomena	9
Intelligent Detection of Dangerous Goods in Security Inspection Based on Cascade Cross Stage YOLOv3 Model	8
Efficient Privacy-Preserving Red Deer Optimization Algorithm with Blockchain Technology for Clustered VANET	7
Evaluation of the Resilient Modulus of the Dunaújváros Loess Soil According to the MEPDG	7
Cassinian Directorial Surfaces Modelling as Geometric Pattern in Designing Architectural Structures	6
A Multi-layer Guidance Approach for Submerged Sensor Networks Integrating Acoustic and Optical Technologies	6
Solving the Problem of Friction and Wear in Auxiliary Devices of Internal Combustion Engines on the Example of Reciprocating Air Compressor for Vehicles	6
Historical Development and Recent Advances in FACTS Technology for Transient Stability in Power Systems	6
Smooth Regulation of DC Voltage in VSC-MTDC Systems Based on Optimal Adaptive Droop Control	6
Evaluation of Elements for Selection of Optimal Solution for Facility Passive Protection from the Fire Spread over Façade	6
Experimental Determination of the Critical Value of the J-Integral that Refers to the HSLA Steel Welded Joint	6
	6
Multi-Response Optimization in MQLC Machining Process of Steel St50-2 Using Grey-Fuzzy Technique	6
Intelligent Prediction of the Sport Game Outcome Using a Hybrid Machine Learning Model	5
High-Efficiency MPPT Strategies for Floating and Conventional Solar PV: A Simulation-Based Study	5
Consequences for the Industry of Radioactive Contamination Accompanied by the Dynamics of 137Cs and 40K Movement in the Environment	5
A Diode-Enhanced Equivalent Circuit and SVM-Based Framework for Accurate Simulation of Battery Discharge under Variable Currents	5

Design and Performance Analysis of a Web Crawler-Based System for Emotional Feature Extraction from Social Media Data	5
Modified Antlion Optimization Based Voltage Control for Five Level Packed U Cell Inverter in Grid Integrated Photovoltaic Charging System for Electric Vehicles	5
Strength Analysis of an Electric Scooter Frame During Simulation of an Obstacle Collision at 45 Degrees	5
Perovskite Oxides for Energy Applications	5
Corrosion Properties of Al2O3-TiO2 Ceramic Coatings Deposited by Plasma Spraying on AZ91 Magnesium Alloy in Different Environment	5
Robust and High-Precision Harmonic Estimation of Shaking Table Vibrations Using Accelerometer and Cheetah Optimization	5
Deep Learning Detection Algorithm for Surface Defects of Automobile Door Seals	5
Application of Hyperbolic Paraboloid in Architectural Design	4
	4
Investigating the Post-Sintering Thermal and Mechanical Treatments on the Properties of Alumina Reinforced Aluminum Nanocomposites	4
Universal Model for the Quality Analysis of Aluminium Alloys Castings	4
Innovative Eye-Tracking Technology Using Angled Comb Drive MEMS Mirrors: A Computational and Experimental Analysis	4
Enhancing UAV Security through Comprehensive Vulnerability Analysis and an ARM PSA-Based Architecture	4
A Low-Dose CT Image Denoising Method Combining Multistage Network and Edge Protection	4
Effect of Carbon Particles on Aerodynamic Performance of a Radial Inflow Turbine in Closed Brayton Cycle	4
A Novel Risk Assessment Model for Prefabricated Building Construction Based on Combination Weight and Catastrophe Progression Method	4
Development of a Precipitation Prediction Model Using Water Resource Measurement Data	4
Factors Influencing Information and Communications Technology Usage	4
	4
Multi-Response Optimization of Burnishing Variables for Minimizing Environmental Impacts	4
Multi-Tooth Contact Analysis and Tooth Profile Modification Optimization for Cycloid Drives in Industrial Robots	4
An Integrated Intelligent CAD/CAPP Platform: Part II - Operation Sequencing Based on Genetic Algorithm	4
Investigation of Tribological Performance cum Machining Efficiency with Surface Quality of Al HMMC Reinforced with ES-Gr using GRA and SEM Outcomes	4
Finite Element Analysis of Slope Stability of Fushun West Open-Pit Mine	4
A Hybrid Technological Innovation Text Mining, Ensemble Learning and Risk Scorecard Approach for Enterprise Credit Risk Assessment	3
Low-Dose X-Ray Visual Weld Defect Feature Extraction and Classification	3
Analyzing the Impact of Industry 4.0 and the Internet of Things on Business Policy - The Case Study	3
Chaos Mapping and Marine Predators Algorithm-Based Deep Learning Framework for Intrusion Detection in IIoT Networks	3
Entrepreneurial Factors Influencing Recovery from Covid-19: A Country-Level Analysis	3
3D Reconstruction of Optical Building Images Based on Improved 3D-R2N2 Algorithm	3
Improved Electricity Portfolio Prediction Based on Optimized Ant Colony Algorithm	3
Simulation of the Working Diameter in 3-Axis Ball-end Milling of Free Form Surface	3
Influence of Body Mass Index on Comfort and Parametric Optimization Design of Seat	3
Assessment of Urban Community Emergency Preparedness and Response Capacity Using Entropy Weight Method and Multilayer Fuzzy Comprehensive Model	3
Optimization of Multi-temperature Joint Distribution Paths for Convenience Store Chains	3
Evaluating the Spatial and Functional Characteristics of Existing Spa Hotels - Case Study of Serbian Spas	3
Numerical Simulation Study on the System Dynamics of Sea Buckthorn Harvester	3
Compliance with Saudi NCA-ECC based on ISO/IEC 27001	3
Research on Digital and Intelligent Innovation Transformation Strategy of International Chinese Language Education Reshaped by Generative Artificial Intelligence	3
Enhanced Secured and Real-Time Data Transmissions in Wireless Sensor Networks using SFRT Routing Protocol	3
Water Quality Prediction Method Based on OVMD and Spatio-Temporal Dependence	3
Supervision Timing Simulation Analysis of Community E-commerce Platform Supply Chain Based on Tripartite Game Model	3
Layout and Location of Water IoT Device Based on Few-Shot Reinforcement Learning	3
A Fuzzy Neural Network Approach for Evaluation of Wetland Restoration Programmes	3
A Novel Consensus Mechanism Using Publicly Verifiable Randomness for Blockchain Networks	3
Rolling Bearing Fault Detection in the Range of Ultrasound	3
A Study of the Effect of Graphene on Fatigue Life of CuAlNi Shape Memory Alloy	3
Intelligent Sports Teaching Tracking System Based on Multimedia Data Analysis and Artificial Intelligence	3
Deep Learning Technique for Power Domain Non-Orthogonal Multiple Access Using Optimised LSTM in Cooperative Networks	3
Risk Assessment of Karst Tunnel Water Inrush Based on Combined Weighting Method	3

Research on the Dynamic Evolution Model of the Influence of Foreign Trade on Economic Resilience Level Based on Triangular Fuzzy Entropy	3
Spatio-Temporal Analysis of Electric Cab Charging Behavior Based on Order Data	3
Research on Damage Detection of Civil Structures Based on Machine Learning of Multiple Vegetation Index Time Series	3
A Novel Completely Local Repairable Code Algorithm Based on Erasure Code	3
Transmission Power System Planning Under New Generation Insecurity	3
Development of a Conceptual Model for Environmental Monitoring in Underground Coal Mining	3
Study on Multimodal Session Recognition Based on Graph Neural Networks	3
Enhanced Motion Artifact Mitigation in ECG Signals using Nonlinear Autoregressive Networks with Cat Swarm Optimization and Fractional Calculus	2
An Experimental and Simulation Study of Ultrasonic-Assisted MIG Welding Power Supply	2
	2
Enhanced Anti-Offset Method for Wireless Power Transmission using Bilateral LCC Compensation	2
Prediction of Depth Distribution Curve of Dissolution Rates Based on the Undulating Features of Rock Surfaces	2
Framework for Measuring Innovation Performance in Higher Education Institutions	2
CFD Analysis of Smoke Extraction in High-Altitude Highway Tunnel Fires with Vertical Shafts	2
EODM: On Developing Enhanced Object Detection Model using Fast Region-based Convolution Neural Networks (FRCNN)	2
Mobile Application Development Skills Set Aligned with the E-Cf Framework and Industry Needs	2
Development of a Performance Evaluation System in Turkish Folk Dance Using Deep Learning-Based Pose Estimation	2
Efficient MIMO Antenna Design Using Metamaterials for Compact and High-Performance Communication Applications	2
Intelligent Simulation System of Human-Computer Interaction Motion Based on Bullet Physics Engine	2
Modelling Grounding Systems Using the Finite Element Method: The Influence of the Computational Domain Size on the Accuracy of the Numerical Calculation	2
Neural Network-Based Optimization of the Electrical Discharge Drilling Process Parameters	2
Discrete Chaotic Fuzzy Neural Network (DC-FNN) Based Smart Watch Embedded Devices for Sports and Health Monitoring	2
Gannet Optimization Algorithm with Attention Enhanced Deep Learning for Intrusions Detecting in IoT	2
Investigation of Flow Dynamics Around a Combination of Different Head Shapes of Spur Dikes	2
The Effect of the Co-Planar Structure on HPBW and the Directional Gain at the Square Patch Antenna around ISM 2450 MHz	2
Design Principle for Additive Manufacturing: Direct Metal Sintering	2
PP-US: An Optimized Ultrasonic Sensor Module for Intelligent Parking in Three-Dimensional Garages	2
Experimental Study of the Product Layer Effect in the Process of Mortar under Corrosion in Sulfuric Acid	2
Continuous Time Least Square PI Control Method for Quasi-Z Source Inverter	2
A Monte Carlo Simulation-Based Method for Generating Virtual Test Scenarios in Virtual Reality Environments	2
Compact Dual-Band Microstrip Patch Antenna Design for 5G Wireless Networks Using Grey Wolf Optimization	2
Analysis of the Effect of Wind Turbines Used in Electric Vehicles on Drag Power	2
Analysis of Strength Characteristics and Energy Dissipation of Improved-Subgrade Soil of High-Speed Railway above Mined-Out Areas	2
Fully Insulated Dual Output DC-DC Converter Battery Charging System with Single Dynamo Input at the Electric Vehicle	2
Study of Multilayer Welded Structure Made of AISI 316LSi Using WAAM	2
RoughSet-DDPM: An Image Super-Resolution Method Based on Rough set Denoising Diffusion Probability Model	2
Spectral Congestion Alleviation using RF Integrated Optical System with Optimization Based Dynamic Carrier Switching	2
Strength Degradation Characteristics of the Steel-Concrete Interface Under Cyclic Shear	2
Design and Evaluation of a Casting Valve Body Positioning System for Riser-Cutting Robots	2
Market Performance and Customer Satisfaction Relation in Automotive Sales, Maintenance, and other Services	2
Optimal Power Flow Analysis of a Power System with Distributed Generators and Storage Considering Seasons	2
Experimental and Numerical Studies on Improvement of Aerodynamic Performance of a Semi-trailer Truck Model Using the Cabin Spoiler	2
Enhanced Data Protection and Application Delivery in Cloud Computing Using Intelligent Optimization and Encryption	2
An Improved Apriori Algorithm for Association Rule Mining in Employability Analysis	2
Optimizing Two-Dimensional Cutting Algorithms for the TFT-LCD Industry using Multi-Objective Strategies	2
An Ensemble Learning Based Strategy for Customer subdivision and Credit Risk Characterization	2
A Decentralized Lightweight Blockchain Nodes Architecture Based on a Secure OpenFlow Protocol Controller Channel	2
A Deep Learning-Based Framework for Robust Facial Keypoint Localization in Unconstrained Conditions	2
An ANN Based MPPT for Power Monitoring in Smart Grid using Interleaved Boost Converter	2
Hybrid Metaheuristics with Deep Learning Enabled Cyberattack Prevention in Software Defined Networks	2
A Cloud Based Network Intrusion Detection System	2
Deep Denitrification of Domestic Sewage by Sulfur-based Mixotrophic Denitrification Filter	2
Application of Lean Manufacturing Methods in the Production of Ultrasonic Sensor	2
Effect of Fly Ash and Indus River Sand on Mechanical, Durability and Environmental Performance of Autoclaved Aerated Concrete (AAC)	2
Comparative Study on Sealing Technology of Gas Drainage Borehole in Soft Coal Seam	2
ESO Based MPC Design and Experiment Investigation for a Fin Stabilizer Electro-Hydraulic Servo System	2
Calibration of Two Novel Segmentation Approaches by Synthetic Road Vehicle Vibrations	2
Query Based Location Aware Energy Efficient Secure Multicast Routing for Wireless Sensor Networks Using Fuzzy Logic	2
Magnetic Field Analysis and Structure Optimization of Deflection Double Stator Switched Reluctance Generator	2
Research on Damage Identification of Beam Structure Based on Dynamics	2
Hybrid Sine-Cosine Black Widow Spider Optimization based Route Selection Protocol for Multihop Communication in IoT Assisted WSN	2
Dual-Surface Engineering of Fe3O4 Magnetic Nanoparticles: Enhanced Magnetorheological Performance and Tribological Mechanisms	2
Improving the Secondary Users' Quality of Service in Cognitive Radio Networks Using Partial Order Transfer Learning through Unused Channel Allocation	2
Wireless Sensor Network Design in Grid-Free Structure	2
Effects of Fibre Bragg Gratings and Channel Number Variation on System Performance in Free Space Optical Communication Systems	2
High Embankment Dam Stability Analysis Using Artificial Neural Networks	2
A PRISMA-Compliant Review of DEA Applications in Multimedia	2
Research on Optimal Allocation of High-Quality Development of Digital Manufacturing Based on a Priori Improved Algorithm	2
A Novelty Method for Identifying Risk Factors of Sudden Food Safety Event	2
Performance Comparison of No-preference and Weighted Sum Objective Methods in Multi-Objective Optimization of AVR-PSS Tuning in Multi-machine Power System	2
Architectural Color Conservation and Renewal Strategies in Historic Urban Areas: An Analysis Based on the Historic City of Macao	2
Experimental Study on the Aerodynamics of a Hybrid Dolphin Airfoil	2
Influence of Housing Material and Geometry on Thermal Stability of Threaded Spindle Bearing Assembly	2
Hybrid Swarm Intelligence for FPGA-Based Noise Mitigation in Gradient-Sensitive MRI Systems	2
Enhancing Text Summarization with Linguistic Prompting and Reinforcement Learning: A Human-Centered Approach	2
A Novel Power Quality Improved Lead Acid Battery Charging System for the Electric Rickshaw	2
Iterative Decoupler Design Method for TITO Processes	2
Parameter Optimization and Test of High-Speed Plough Based on Coupling EDEM and Recurdyn	2
GRASS GIS Scripts for Satellite Image Analysis by Raster Calculations Using Modules r.mapcalc, d.rgb, r.slope.aspect	2
Affordable Collision Detection for a 3D-Printed Robotic Arm	2

Mobile 5G Network Deployment Scheme on High-Speed Railway	2
A Novel Support Vector Machine Model of Traffic State Identification of Urban Expressway Integrating Parallel Genetic and C-Means Clustering Algorithm	2
Pattern Anomaly Detection based on Sequence-to-Sequence Regularity Learning	2
Infrared Image Segmentation Method Based on Variable Helix Optimized-Sparrow Search Algorithm	2
Joint Optimization of Distribution Center Location and Inventory for Railway Vehicle Components Using Location-Inventory Models	2
Hybrid Product Cost Calculation Model as a Decision Support Tool	2
Research on Anti-Wear Properties of Nano-Lubricated High-Speed Rolling Bearings under Various Working Conditions	2
Innovative Vibration Signal Recognition for Enhanced Pipeline Safety Using Optimized Wavelet Denoising and Particle Swarm-Tuned Neural Networks	2
Flexspline Deformation Analysis Depending on the Polymer Material Used in the Harmonic Drive Prototype	2
Influence of p-MIG Welding Parameters to Wall Geometry of Aluminium Alloy 2319 Fabricated Using WAAM	2
Experimental and Numerical Evaluation of Residual Stresses Caused by Welding the Nozzle to the Header	1
Barnacles Mating Optimizer with Hopfield Neural Network Based Intrusion Detection in Internet of Things Environment	1
Possible Improvements of TCP Protocol with the Use of Heuristic Methods	1
Time Series InSAR Monitoring and Analysis of Spatiotemporal Evolution Characteristics of Land deformation in Typical Artificial Islands around Hainan Island	1
An Integrated Intelligent CAD/CAPP Platform: Part I-Product Design Based on Elementary Machining Features	1
DHANet: Dual-Stage Hybrid Attention Network for Blind Image Super-Resolution	1
Characterisation of Coconut Coir Under Compaction: Determination of Pellet Density, Specific Energy and Compression Force	1
Research on Feature Selection Methods based on Random Forest	1
Miniaturised Wide and Dual band Reconfigurable Antenna on-demand for Portable Wireless Devices	1
Deformation Law and Spatial Effect of Deep Foundation Pits for Subway Construction in Soil-Rock Composite Strata in Seasonally Frozen Areas	1
Comparative Energy Consumption Analysis of the Hybrid Diesel Train and the Hybrid Fuel Cell Train	1
Reduction of Cutting Temperature Effect and Surface Deficiencies on CNC Turned AZ91 Mg Alloy with Fluidized Nano Oxide Coolants	1
Study on the Interest Game of Intermodal Road-Rail Transportation Under Low Carbon Policy	1
Estimation of Rock Brittleness from Point Load Strength Index Data Using Machine Learning Methods	1
Comparative Analysis of CNN Architectures for Eight-Class Facial Expression Recognition: A Performance and Error Pattern Study	1
Sequential Pattern Mining with Multidimensional Interval Items	1
Analysis of Temperature-induced Deformation of Reinforced Track Slabs under the Influence of Multiple Factors	1
The Durability Behaviour of a Ferrocement Slab Utilizing Ground Granulated Blast Furnace Slag and Nano Silica	1
Data Mining, Machine Learning, and Statistical Modeling for Predictive Analytics with Behavioral Big Data	1
Barrier Lyapunov Function-Based Output Feedback Control for a Class of Nonlinear Systems with Constraints	1
Evaluation of the Innovation Capability of Import Borderless E-commerce Platform Based on Factor Analysis and TOPSIS Method	1
A Novel Biometric Key Security System with Clustering and Convolutional Neural Network for WSN	1
Refined Oil Loading and Unloading Process Risk Assessment using Stochastic Colored Petri Nets Integrated with Risk Factors	1
Real-Time Cyber Attack Detection Over HoneyPi Using Machine Learning	1
Iron Intermetallic Compounds (IMCs) Formation Mechanism in the Molten Aluminium Zinc (Al-Zn) Coating Alloy	1
Conceptual Design and Material Analysis of BLDC Motor Using FEA Tools for Electric Vehicle Applications	1
Research on the Integration and Innovation Path of Artificial Intelligence and the Real Economy	1
Combined Machine Tool for Stepped Shafts	1
Seismic Performance Evaluation of RC Buildings Using Irregularity Based Indices	1
Logistics Service Quality Sentiment Analysis with Deeper Attention LSTM Model with Aspect Embedding	1
A Cascaded Deep Forest Framework for Robust Driver Fatigue Detection using Forehead Electroencephalography	1
Preparation of Recycled Paper Using Tea Stems and its Application in Product Design	1
Dynamic Correction Analysis and Optimization Model of Gear Pair Based on the Normalization of Gear Modification Parameters	1
Energy and Cost Evaluation of Different HVAC Systems in an Office Building	1
An Empirical Study on Document Similarity Comparison Evaluation Between Machine Learning Techniques and Human Experts	1
A Novel Work-State Analysis Method for Modelling Photovoltaic Arrays Under Multi-Illumination Conditions	1
Design of an Air-Assisted Mechanical Seed-Metering Device for Millet (Setaria Italica) Based on Experiments and Simulation Analysis	1
Gaussian Regression Process for Prediction of Compressive Strength of Thermally Activated Geopolymer Mortars	1
Effects of Altitude on Fire Smoke Diffusion in Semi-Lateral Smoke Exhaust Highway Tunnels	1
A Crowdsourced Test Defect Number Prediction Model Based on Test Labor and Test Reports	1
Implementation of Trajectory Planning Algorithms for Track Serving Mobile Robot in ROS 2 Ecosystem	1
Establishing a Fusion Model of Attention Mechanism and Generative Adversarial Network to Estimate Students' Attitudes in English Classes	1
Comparative Assessment of Linear and Nonlinear Analysis: Balıkesir Clock Tower Case Study	1
Design and Implementation of a Universal Middleware-Based Dynamic Module for SAR Electric Signal Processing in Satellite Systems	1
Utilization of Filler Materials in Self-Compacting Concrete as a Partial Cement Replacement	1
Image Multi-Threshold Segmentation Based on Variable Precision Rough Set and K-L Roughness Particle Swarm Optimization	1
Exploration of ESG Audit Adaptive Decision-Making and Anomaly Analysis Driven by Reinforcement Learning in Artificial Intelligence	1
Line Analysis of Changes in the Deformation Zone During Lüders Band Propagation	1
Regional Disparities and Evolutionary Trends in Physician Resources in China: A Deep Learning and Text Mining Approach	1
MS-PBFT: A Master-Slave Multichain Consensus Mechanism Based on Pre-Broadcast and Threshold Signatures	1
The Investigation of the Role of RFID in Mitigating Delay Factors in Construction Projects	1
Robustified Kalman Filtering Using Both Dynamic Stochastic Approximation and M-Robust Performance Index	1
Structural Integrity of Pressure Vessel Heads Made by Incremental Sheet Forming from High-Quality Steel P460 NL1	1
The Effect of Cylindrical Canopy on Atrium Buildings: Experimental Study	1
HFTN-SR: High-Frequency Feature Transfer Network for MR Image Super-Resolution	1
The Impacts of Air Flow and Leg Geometry on Thermoelectric Generator Performance	1
H-infinity Variable-Pitch Control for Wind Turbines Based on Takagi-Sugeno Fuzzy Theory	1
Deployment with Location Knowledge by Multi Area Approach for Detecting Replica Nodes in Wireless Sensor Network	1
Design of Experiment Study of the Parameters that Affect Performance of a Thermoplastic Elastomer Spring of a Hybrid Vehicle Torque Limiter	1
The Impact of AI-Driven Educational Integration on High-Quality Economic Development: An Analytical Study	1
System Control and Data Acquisition of University Photovoltaic Power Plant	1
GAN-Based Facial Information Protection for IoT Using Transfer Probability Models	1
Cost Strategy Impact on Development and Success of Croatian Metal Processing Industry	1
An Electric Vehicle Charging Control System using LSTM Encoding-GRU Decoding	1
Economic Factors in the Process of Employee Motivation in the Metal Processing Industry in the Brod-Posavina County	1
	1
Development of Augmented Reality Underground Facility Management System using Map Application Programming Interface and JavaScript Object Notation Communication	1
A PSM Model to Estimate the Impacts of Internet Use on Rural Residents' Health	1
Nickel Oxide/Graphene Oxide (NiO/GO) as Double Hole Transport Layer in Perovskite Solar Cell	1
A Generative Adversarial Networks Based Approach for Literary Translation	1
Safety Calculation Model of Grade Crossings with Automatic Barrier System	1
Allocation of Electric Taxi Charging: Assessing the Layout of Charging Stations Based on Charging Frequency	1
A Comprehensive Evaluation of the DFP Method for Geometric Constraint Solving Algorithm Using PlaneGCS	1
Bidirectional Image Translation for Robust Person Re-Identification in Unsupervised Domain Adaptation	1
A High-Performance Fully Differential Low Noise Trans-Impedance Amplifier for Near Infra-Red Spectroscopic Systems	1
Hyb_LSTM+KCNN: Hybrid Long Short Term Memory with Kernel Convolution Neural Networks Based Time Series Forecasting for Air Quality Index Detection	1
A Blockchain and Hybrid Deep Learning for Secure and Efficient Healthcare Data Transmission and Management	1
Development of Bandwidth Optimization and Limiter Software for Network Efficiency in Software-Defined Networks	1
A Multi-Dimensional Fusion Method for Identifying Key Nodes in New Energy Vehicle Supply Chains	1
Enhancing Efficiency and Stability in a Multigenerational Geothermal-Wind Renewable Energy System	1
Determination of Economic Effect from the Implementation of Automated Designing Systems of Technological Processes	1
Research on Transparent Access Technology of Government Big Data	1
Enhanced Low Power FinFET-Based Flash ADC Design for High-Speed Electronics Applications	1
Image and Signal Processing Approaches Applying in Developing Business Markets Affects Economic Growth	1
Teachers' Attitudes Towards the Quality and Prospects of Architectural Education in the Republic of Serbia	1