International Journal of Thermal Sciences

Article	Citations
The interaction between the latticework duct and film cooling on the thermal performance with different film cooling hole locations	225
Response to the comment “Numerical simulation of steam condensation on the surface of a horizontal tube using the VOF method. A comment on the results from Li Shu and Yonglin Ju paper ‘Numerical study	105
Analysis of vortex cooling fluid-structure interaction under different vortex chamber curvature	95
Editorial Board	94
Oscillatory natural convection in a square enclosure containing a PCM suspension	85
Numerical analysis of thermal mechanism in downward flame spread over inverted surfaces of discrete inclined solid fuels	84
Enhancing turbulent heat transfer and flow characteristics in ribbed channels with periodic slits: A comparative study of transverse, inclined, and V-shaped configurations	83
Modeling and optimization of mini-channel tube bundle air-coolers applied in stratospheric condition	83
Numerical investigation of flat-plate film cooling using Very-Large Eddy Simulation method	83
Experimental study on condensation flow patterns and heat transfer characteristics of non-azeotropic and immiscible binary mixed vapors	81
Study on coupling effect of CRUD growth and heat transfer on fuel rod	80
Simulation of lithium-ion battery thermal runaway considering active material volume fraction effect	75
Investigating an accurate method for measuring the outdoor mean radiation temperature	75
Optimisation and numerical study of forced convection heat transfer design for glass tempered cooling grille	74
A novel air-cooled Li-ion battery (LIB) array thermal management system – a numerical analysis	74
Effect of vibration on the thermal performance of a hybrid thermal management system with liquid cooling and phase change material	72
Experimental study on transient running characteristics of passive containment cooling system under heave conditions	71
The coupling effects of oxide particle microstructural parameters and atmospheric (temperature, pressure, composition) conditions on thermal transport in powder beds	70
Experimental and numerical analysis of a helically-coiled solar water collector at various angular placements	69
Effect of geometrical and operational parameters on paraffin's melting performance in helical coiled latent heat storage for solar application: A numerical study	67
Experimental study on heat transfer performance of axially rotating heat pipe in steady state	66
An integrated thermophysiological model for predicting thermal response of medical staff wearing medical protective clothing in summer	65
Theoretical study of bubble departure and lift-off diameters model for evaporation based on microlayer in flow boiling	64
Research on the thermal comfort of passenger compartment based on the PMV/PPD	63
Combined experimental and numerical studies on flow characteristic and heat transfer in ribbed channels with vortex generators of various types and arrangements	63

Development of electro-thermal model for prismatic Lithium-ion cell subjected to electric vehicle drive cycle using converging fluid channel	62
Utilization of nanostructured surfaces on microchannels to enhance critical heat flux in the pool boiling	62
Experimental study of steam condensation heat transfer characteristics in a horizontal tube under rolling motion	59
Numerical simulation of two-phase flow: Air-mist film cooling over a flat plate	59
Numerical investigation on heat transfer performance and bubble characteristics of rectangular channels under different low-pressures	58
Rapid detection of the vacuum failure of logging tools based on the variation in equivalent thermal conductivity	58
Nusselt number predictive model for Taylor–Couette flow with circumferential grooves under different operating parameters	57
Effect of degradation of the thermal barrier coating on the cooling performance of vane in gas turbine	55
Full-scale experimental and numerical study of smoke spread and temperature distribution in a room-corridor structure building	54
Heat transfer performance of liquid film outside horizontal sintered tube evaporator	54
Real-time reconstruction of thermal boundary condition of porous media via temperature sequence	53
Experiments and qualitative analysis by artificial neural network approach on pool boiling of FC-72 on finned surfaces confined by an unheated horizontal wall	53
Condensation heat transfer and correlation analysis in helical tube of mixed carbon-hydro refrigerant	53
Nucleate boiling heat transfer during water–IN–oil emulsion drop impact onto a heated solid surface	52
Natural convection onset during melting of phase change materials: Part I – Effects of the geometry, Stefan number, and degree of subcooling	52
Near-infrared measurement of temperature fields formed by mixed convection from a small heating sphere in water	51
Thermo-optical coupling applied to high luminance LED used in automotive front lighting	51
A mathematical model for longitudinal temperature evolution in strip deformation zone during cold rolling	50
Breakup regimes and heat transfer of an isolated bubble and Taylor bubble flow in the T-type microchannel	49
Investigating the fractal dimension of flame fronts of the biodiesel-diesel blends combustion in atmospheric conditions and engine cylinders: An experimental study	49
Sensitivity analysis of nanofluid flow over different flat tubes confined between two parallel plates using Taguchi method and statistical analysis of variance	48
Dual-polarization strong nonreciprocal thermal radiation with silicon-based nanopore arrays	48
Viscoplastic model-based analysis of in-service oscillation temperature and thermal stress in a rotating component	48
Comparisons on flow characteristics and film cooling performance of cylindrical and sister holes with/without internal coolant crossflow	48
Evaporation characteristics of viscous droplets on stainless steel superhydrophobic surface	47
Incorporation of phase change materials in fire protective clothing considering the presence of water	47
Nanostructured metal-oxide materials for solar energy absorption and conversion for industrial heater applications	47
Conjugate turbulent natural convection with thermal radiation in a vertical and inclined wall with heat sources	47
Experimental and numerical analysis on thermal-dynamic performance in designed impingement-jet double-layer nested microchannel heat sinks with streaming vertical bifurcations	47
A new hybrid CFD approach to study the impact of forced convection on radiant cooled wall with baseboard diffuser including various vane angles	47
Surface reconstruction enhanced interfacial thermal conductance between CsPbI	46
Prediction of thermal diffusivity of volcanic rocks using machine learning and genetic algorithm hybrid strategy	45
Assessment and improvement on the applicability of turbulent-Prandtl-number models in RANS for liquid metals	45
Flow and heat transfer performance analysis of brazed plate heat exchangers under marine vibration conditions	45
Experimental analysis of double layer microchannel heat sink with distinct fin configurations in upper and lower layers	44
Active protection against fire: Enhancing the flame retardancy of sandwich panels using an expandable graphite layer formation	44
A novel elastomeric copolymer-based phase change material with thermally induced flexible and shape-stable performance for prismatic battery module	44
Simultaneous reconstruction of temperature and concentration of H2O and soot based on infrared emission spectrum by inverse analysis	44
Deep learning and thermographic imaging method for thermal comfort prediction in different genders	44
Thermo-flow modeling of geometry evolution considering the velocity flow fields during pulsed-laser processing	43
Analysis of complex methane transcritical flow and heat transfer mechanism in PCHE Zigzag channel	43
Application of non-invasive active infrared thermography for delamination detection in fresco	43
An electron–phonon Monte Carlo study on thermal transport in GaN	43
Enhancement of transfer processes on a channel wall covered with regular small-size ribs	43
Innovative configurations for heat sink integrated with piezoelectric fans	43
Structure optimization of liquid-cooled plate for electric vehicle lithium-ion power batteries	42
Experimental study of ultralow flow resistance fractal microchannel heat sinks for electronics cooling	42
Thermal constriction resistance of a functionally graded material plate heated by a circular disc heat source on one face and isothermal on the opposite face	42
Multiscale topology optimization of cellular structures with high thermal conductivity and large convective surface area	42
Experimental investigation on thermo-hydraulic performance of Al2O3–water, CuO–water and MWCNT–water in a double-tube helically coiled heat exchanger	42

Measurement of thermal diffusivity and conductivity of thin films using laser-line lock-in thermography	42
Condensation heat transfer in annuli outside horizontal stainless steel enhanced tubes	42
Thermal optimization of secondary cooling systems in the continuous steel casting process	42
Molecular dynamics simulation and experimental investigation on heat transfer performance of arranged shape memory GO/EP composites	42
The cooling effect of high geothermal tunnel construction environment: A case of ice and spray method in an extra-long tunnel	41
Laboratory experiment of fire spread between two informal settlement dwellings	41
Graphene-mediated suppression of Leidenfrost effect for droplets on an inclined surface	41
Nearly spherical ablation zone with minimally invasive microwave ablation: Analysis and experimental characterization of a tapered-tip symmetric dipole antenna	41
The comparison between integral and local calculation methods on the simulation of crystallization fouling	41
Thermal stratification and self-pressurization in a cryogenic propellant storage tank considering capillary effect in low-gravity	41
Thermal characterisation of isotopic heat sources for enhanced thermophotovoltaic systems	40
A versatile battery thermal management system based on thermoelectric devices for preheating and cooling	40
Optimization of operational performance of cantor fractal microchannels under high heat flux conditions	40
Multi-objective optimization study on heat transfer performance of solar salt in non-circular twisted tube heat exchanger based on entropy generation number and NSGA II	40
Substrate effects on the near-field radiative heat transfer between bi-planar graphene/hBN heterostructures	40
Thermal modeling and analysis of multi-mover motors considering mover quantity and dynamic states	39
Effect of active cooling on the thermal effect of electromagnetic rail under single launch mode	39
Direct numerical simulation of the fully developed turbulent free convection flow in an asymmetrically heated vertical channel	39
Determining thermal resistance of down quilt based on a mathematical heat transfer model	39
Thermomagnetic cooling of current carrying micro-wire in ferrofluid: Two-phase approach	39
Film heating heat transfer and effectiveness measurements for mainstream flow over a conical surface	39
Experimental setup for direct measurements of spectral directional emissivity from 0° to 80° angles at temperatures as low as 40 °C	38
Conduction-convection coupled heat and moisture transfer in the open-width pre-drying for elastic fabrics	38
Deriving local Nusselt number correlations for heat transfer of nanofluids by genetic programming	38
Machine learning-assisted high precision predictive modelling of convective heat transfer in fluid channels fabricated by laser powder bed fusion	38
Exploring ice melting dynamics in beverageware	38
Coherent and incoherent effects of nanopores on thermal conductance in silicene	38
Experimental and numerical study on indoor thermal environment of solar Trombe walls with different air-channel thicknesses in plateau	38
Influence of bag filter ash to spectral thermal radiation in fluidized bed combustors co-fired with biomass	38
Hydrothermal performance and entropy production rate of rGO-CO3O4/H2O hybrid nanofluid in corrugated-converging pipes	38
Effect of water temperature on ice melting characteristics under a bubbly flow	38
Effect of pumping gas on temperature field and pressure in hollow tungsten arc	37
Effect of pressure on the oil shale convection heating in-situ conversion process	37
Optimizing cooling electronic chips at high altitude with consideration of solar radiation	37
Thermal performance of FeO/water nanofluid flow in a newly designed dimpled tube under the influence of non-uniform magnetic field	37
A numerical analysis of fluid flow and heat transfer in wavy and curved wavy channels	37
Comparative performance analysis of microchannel heat sink with different geometric structures	37
Benchmark study and thermal-load analysis for soft X-ray beamline of Korea fourth-generation storage ring	36
Fouling prediction of heat exchanger surface under alternating magnetic field based on IGWO–SVR	36
The optimal longitudinal location of curved winglets for better thermal performance of a finned-tube heat exchanger	36
A sensitivity analysis of the effect of curvature ratio on the thermal-hydraulic performance in helically coiled tubes with corrugated walls	36
Investigation on cooling characteristic of the novel double-wall with the hollow pin fin	36
Molecular interactions study and thermophysical properties of glycerol-calcium chloride DESs: Insights from micro-nanoscale interfacial dynamics	36
Investigation of heat transfer characteristics in air-to-air heat exchanger with steady flow, oscillating flow and sound waves	36
Thermohydraulic performance of Al2O3-water nanofluid during single-phase flow and two-phase subcooled flow boiling	36
Decoupling mechanisms of “avalanche” phenomenon for laser ablation of C/SiC composites in hypersonic airflow environment	35
Investigation on the suitability of conventional film hole under pulsed detonation incoming flow conditions	35
Influence of different air inflow rates on low-pressure flash evaporation from a water pool	35
Pore-scale study on Rayleigh-Bénard convection formed in the melting process of metal foam composite phase change material	35
On the effect of wave amplitude and corrugation profile of certain types of corrugated channels on thermal performance and entropy generation	35
Study on heat transfer characteristics of NGVs influenced by non-reacting lean burn combustor simulator flow	35
Temperature uniformity characteristics of array jet impingement cooling with the maximum cross-flow scheme	35
Control policy transfer of deep reinforcement learning based intelligent forced heat convection control	34
Editorial Board	34
Experimental characterization of Al2O3 foam based on high temperature thermal response experiments	34
Radiation model and thermal characteristics of OLED glass substrate using electric heating tube	34
Effects of radiation on the effective thermal conductivity in packed beds	34
Editorial Board	34
Thermal-resistance modeling of free convection in metal foam for electronics cooling	33
Evolution of liquid–vapour interface during film boiling on sphere	33
Experimental study of a high-capacity dual compensation chamber loop heat pipe at different orientations	33
A comparative study of purge slot exit shape on the film cooling effectiveness of a gas turbine shroud	33
The study of 4He twin-tube convective heat switches	33
Impacts of liquid phase distribution on the effective thermal conductivity of closed-cell thermal insulation	33
Lithography-free polarization insensitive and wide-angle solar absorber operating in wide spectrum	33
Functional estimation of space and time varying thermal properties using modified conjugate gradient method	33
A novel approach based on neural network to model the free convection within a differentially heated cavity partitioned by interior curved slats	33
Experimental study on energy-exergy performance of single-phase natural circulation loop using mono/hybrid nano-oils	33
Combined passive enhancement techniques improve the thermal performance of latent heat storage system: A design anomaly?	33
Transient multilayer analytical model of a line heat source probe for in-pile thermal conductivity measurements	33
Thermal-hydraulic performance in a tube with punched delta winglets inserts in turbulent flow	33
De-icing behavior and efficiency of electrothermal film surfaces with different non-wettability in low-temperature flow field	32
How campus green space elements differently influence students' thermal perception during transition seasons?	32
Computational investigation of highly heated homogeneous subsonic turbulent jets issuing from plane and circular nozzles	32
Numerical study of flashing pipe flow using a TFM-PBM coupled method: Effect of interfacial heat transfer and bubble coalescence and breakup	32
Effect of film thickness and temperature on condensation and momentum accommodation at the liquid–vapor methane interphase in contact with a quartz substrate	32
CFD simulation and optimization of natural convection in a vertical annulus with nanofluids	32
A data-driven intelligent learning algorithm for simultaneous prediction of aerodynamic heat and thermo-physical property parameters	31
ANN-based optimization of disk-shaped microchannel heat exchanger for thermal and hydraulic performance improvement	31
Analytical and numerical study of a convection–diffusion–reaction–source problem in multilayered materials	31

Enhanced radiative heat transfer and modulation using VO2-based metasurfaces	31
Cooling performance of sliver solar cells in low concentration PV system with ribbed-groove mini-channel heat sink	31
Pore-scale conjugate heat transfer analysis of turbulent flow over stochastic open-cell metal foams	31
Design of a temperature control system for transient thermal measurement utilizing the backpropagation PID algorithm	31
Lattice Boltzmann simulation of the effect for adding a ghost fluid layer on the simulation accuracy of a sessile droplet on a heated surface	31
3D numerical investigation of trans-critical heat transfer enhancement in regeneration cooling channel with crescent rib	30
Explosive boiling of suspended argon films in the cassie-baxter state on nanopillar-arrayed surfaces	30
Geyser boiling experiments in thermosyphons filled with immiscible working fluids	30
Combining surface modification of carbon fiber and introduction of phase change capsules to synergistically improve heat dissipation performance of dual-function polymeric composite	30
Numerical heat transfer investigation of a single impingement jet with combined V-ribs and preliminary optimization of V-rib configuration in initial crossflow	30
Effect of nanoparticles and metal foams on heat transfer properties of PCMs	30
Experimental study on nucleate boiling of liquid nitrogen spray cooling on superhydrophilic microstructured surface	30
Circular disk solar absorber heater design for industrial heaters based on Fe2O3–Si structure	30
EHD augmented heat transfer during upward bubbly flow boiling for low to medium frequency AC electric fields	29
Prediction of nanofluid heat transfer characteristic and pressure drop in helical coil via artificial neural networks	29
Theoretical study of laminar plasma quenching of rail steel using the fluid-solid-thermal coupling method	29
Determination of the position and characteristics of supercritical heat transfer deterioration	29
Thermal performance, embodied energy and environmental CO2 emissions analyses for double pipe U-bend heat exchanger working with MWCNT/water nanofluid	29
Motor cooling method using flow boiling of two-phase refrigerant and its analysis with lumped parameter thermal model	29
Solving transient coupled conductive and radiative transfers in porous media with a Monte Carlo Method: Characterization of thermal conductivity of foams using a numerical Flash Method	29
Exploring thermal dynamics and porosity of cold-sprayed Ti-6Al-4V coatings on Al6061-T6 substrates: A pulsed thermography and numerical modeling approach	29
Linear stability analysis of micropolar fluid in a vertical channel	29
Enhanced flow boiling by manipulating two-phase flow in Tesla channel heat sink using HFE-7100	29
Application of a thermal circuit model for the prediction of interfacial thermal resistance between water and a nanostructure surface using molecular dynamics simulations	29
Inverse solution to two-dimensional transient coupled radiation and conduction problems and the application in recovering radiative thermo-physical properties of Si3N4 ceramics	29
Combined Eulerian–Eulerian Multiphase Frost model and solidification and melting model to predict the cooling performance of subcooled eutectic plates	28
A combined enthalpy-level-set approach for melting/solidification within two immiscible fluids	28
Dispersion relation and frequency-dependent thermal conductivity of the two-temperature systems	28
Thermal analysis of permanent magnet synchronous linear motor accounting for three-phase current unbalance	28
A novel apparatus dedicated to the estimation of the thermal diffusivity of metals at high temperature	28
Increasing the ultimate elongation of metal shaped-charge jets by their radiation heating in free flight	28
Experimental and numerical study on buoyancy-induced convection between two facing isothermal surfaces in an enclosure partitioned with a new arrangement of dividers; an application to double-glaze wi	28
Motion characteristics of suspended particles with different morphologies and effects on the seepage and heat transfer in energy storage aquifers	28
Investigation of the mechanism of global and terminal flame uplifted in subsonic horizontal spray jet flame under sub-atmospheric pressure: From macroscopic to microscopic perspective	28
An analytical heat exchanger model to study dynamic behavior in the case of simultaneous inlet variations	28
Local heat transfer measurements of the fin on the blade crown by infrared thermography	28
Numerical investigation of gas separation via thermally induced flows in ratchet-like patterned microchannels	28
Uncertainty quantification and sensitivity analysis of aerothermal performance for the turbine blade squealer tip	28
Quasi-equilibrium approximation of the solidification process for micro phase change materials taking into account curvature and surface tension	28
Transient behavior and maximum heat flux ratios of two-layer corium pool	28
Numerical study of transient jet phenomena and system effects during the SGTR accident in lead-bismuth fast reactor	27
Study on the influence of radiation heat transfer on microclimatic parameters in the blind heading of a deep potash mine	27
Spray and dynamic heat transfer induced by 2-methylfuran transient spray impingement on piston surface	27
Effect of energy on rapid curing of carbon fiber reinforced composites	27
Numerical simulation of flow and heat transfer performance during supercritical water injection in vertical wellbore: A parameter sensitivity analysis	27
Numerical investigation of impacting heat transfer of binary droplets on superhydrophobic substrates	27
Dimensionless numerical sensitivity analysis of narrow cracks by means of infrared lock-in thermography	27
An analytical model and experimental validation of annular heat source during scanning electron beam treatment	27
Numerical study on the interfacial heat and mass transfer characteristics of bubble direct contact condensation with the effect of non-condensable gas	27
AC electrowetting-on-dielectric induced vapor-liquid interface oscillation for flow boiling heat transfer enhancement in microchannels	27
Condensation heat transfer of R134a and R410A in multiport rectangular microchannels with different aspect ratio	26
Enhancing the performance of floating photovoltaic system by using thermosiphon cooling method: Numerical and experimental analyses	26
Experimental investigation of bubble dynamics and flow patterns during flow boiling in high aspect ratio microchannels with the effect of flow orientation	26
Analysis of SWCNT-water nanofluid flow in wavy channel under turbulent pulsating conditions: Investigation of homogeneous and discrete phase models	26
Effective thermal conductivity of composite materials made of a randomly packed densified spherical phase	26
Forecasting the flame geometry and ground received radiative heat fluxes of two parallel adjacent fires of hydrocarbon fuel with crosswinds	26
Influence of the braided structure on the film cooling performance over the ceramic matrix composite plate	26
A control strategy for cabin temperature of electric vehicle considering health ventilation for lowering virus infection	26
Gas–liquid slug flow in microfluidic heat exchanger: Effect of gas hold-up and bubble size on pressure drop and heat transfer	26
The effect of variable motive pressures on the performance and shock waves in a supersonic steam ejector with non-equilibrium condensing	26
Numerical study on the mechanism of heat transfer enhancement in the tube with internal axial straight micro fins	26
Aerothermodynamic features of a Coriolis-applied smooth U channel for gas turbine blade	26
Experimental investigation of condensation heat transfer of zeotropic refrigerant/oil mixtures in plate heat exchanger	26
Experimental and numerical study of heat transfer under laminarization condition in a small size supersonic nozzle	26
Effect of unheated segment on heat transfer over a thermally thick material under forced flow	25
Investigation of flow and heat transfer characteristics in heterogeneous Gyroid porous scaffold based on hybrid LBM-FVM solver and FGRA	25
Graphene-based solar absorber structure using GaAs-Al-Zr materials for renewable energy application	25
The effects of staggered triangular ribs induced vortex flow on hydrothermal behavior and entropy generation in microchannel heat sink	25
Enhancement of heat transfer using elliptical twisted inner pipe with convergent conical ring turbulator for turbulent flow in double pipe heat exchanger	25
Numerical simulation study on heat transfer characteristics of steam condensation in the presence of multi-component non-condensable gas outside the tube bundle	25
Combustion and thermal performances of methane-air premixed flame in a novel preheated micro combustor with a flame holder	25
Thermal-hydraulic performance and multi-objective optimization using ANN and GA in microchannels with double delta-winglet vortex generators	25
Thermal performance of thermal management system combining bionic fern-vein liquid channel with phase change materials for prismatic Lithium-ion battery	25
Effect of forced lateral vibration on flow and heat transfer performance within an annular fuel element	25
Experimental study on flow and stability characteristics of horizontal heater and cooler natural circulation loop equipped with air injection	25
Theoretical study on showerhead film cooling effectiveness of adjustable guide vane installation angle for variable cycle Aeroengine	25
Influence of inclined unconfined circular air jet impingement on local heat transfer characteristics of smooth flat plate	25
Multi-objective optimization of a double helical coil heat exchanger using response surface method and genetic algorithm	25
Thermo-hydraulic performance of a solar air heater with staggered C-shape finned absorber plate	25
Heat transfer enhancement using spiral fins in different orientations of Latent Heat Storage Unit	25
Prediction of total heat exchange factor using an improved particle swarm optimization algorithm for the reheating furnace	25
Subchannel analysis of thermal-hydraulic performance in rod bundle with spacer grid considering anisotropic turbulent mixing	24
The coupling process of steam condensation and falling film evaporation with non-condensable gas	24
Numerical investigation of the radiative properties of a fully resolved particle cloud	24
Experimental study on flow boiling heat transfer of high-pressure water in a mini-tube	24
2D temperature tomography of a flame, based on VIS-NIR spectrometry	24
Quantitative validation of an in-flow water condensation model for 3D-CFD simulations of three-way junctions using indirect condensation measurements	24
Thermal performance enhancement by modifying the spiral flow and turbulence transport in an X-lattice cellular structure	24
Periodic gas temperature measurement as an inverse heat transfer problem, utilization of the Particle Filter algorithm and mechanistic models	24
Influence of a novel serrated wire coil insert on thermal characteristics and air flow behavior in a tubular heat exchanger	24
Intelligent decision-making approach for rapid optimization of double-wall cooling structures under varying cooling demands	24
Research on mechanisms of flow and heat transfer in self-rewetting fluids using molecular dynamics	24
Heat transfer enhancement in gas turbine blade trailing-edge internal cooling channel with high aspect ratio twisted fins arranged on sidewalls	24
The evaluation of interfacial area concentration weighted area-averaged gas velocity based on the extended drift-flux model	24
Corrugated surface for polymerase chain reaction (PCR) process: Thermal Rayleigh-Benard instability	24