Fibers and Polymers

Article	Citations
Effects of Alumina Doping on Mechanical and Tribological Properties of Nitrile Butadiene Rubber	48
Fabrication of Herbal Hemostat Films Loaded with Medicinal Tridax Procumbenns Extracts	46
Single Polymer Composites Made of Melt-blown PP Mats and the Modelling of the Uniaxial Tensile Behaviour by the Fibre Bundle Cells Method	45
Effect of Polyamide Binder on Mechanical Properties of Carbon Fiber Spread Tow/Epoxy Composite	45
Internal Structure and Natural Frequency of Cello Endpins Based on Metal-Incorporated Carbon Composites Fabricated by Roll-Wrapping Process	43
Investigation of the Properties of Vortex Spinning Polyester Yarn during Warp Knitting	43
Investigation of the Spike Penetration Resistance of the Weft-Knitted Fabrics with Different Elasticity Ratio	39
Directional Water Transport Property of Cotton–Polyester Knitted Plating Fabric with Multiple Gradient Concentration Coatings	38
Experimental and Numerical Simulation of Resin Flowing in VARI Process	36
Preparation and Properties of Boron Nitride Loaded Regenerated Cooling Fiber	34
Residual Impact Strength of Intra-ply, Inter-ply and Functionally Gradient Basalt/Poly-ester Hybrid Composites Subjected to Charpy Impact	33
In Situ Modification of Alginate Fibers by Nano-montmorillonite for Enhancing the Mechanical Properties	32
Low Liquor Microwave Dyeing of Cotton Fabric with a Minimal Amount of Salt and the Effect of Different Reactive Dye Substituents	31
Preparation of an All-Natural Seaweed Functionalized Lyocell Fiber: A Scalable Approach from Nature to Fabrics	31
Improvement of Moisture Transmission Properties of Acrylic–Cotton Blended Fabric Using Calcium Chloride-Based Desiccants: A Novel Approach	30
Air Permeability Prediction of Herringbone Weave Using Computational Fluid Dynamics and Finite Element Method	29
Accelerated Weathering with Humidity Effects on Physical, Surface Interfacial and Tribology Behavior of Kenaf-Pineapple Laminated Biocomposite Under Different Loading Constraint	29
A Semi-analytical and Experimental Approach Using Molecular Dynamic Simulation for Thermo-mechanical Properties of Surface Functionalized Epoxy/Polyurethane/MWCNT/ZnMoO4 Nanocomposites	28
Investigation of the Catalytic Pyrolysis Of Polyester/Viscose Fibers with Monometallic-Supported Montmorillonite	27
Encapsulation of Frankincense Essential Oil by Microfluidic and Bulk Approaches: A Comparative Study	26
Long-Term Mechanical and Thermal Performance and Lifetime Estimation of a Carbon Fiber Reinforced Polycarbonate Laminate	24
Preparation and Characterization of Free-Standing Electrode Materials from Waste Cotton Fabrics for Electric Double-Layer Capacitors	24
Preparation of Porous TiO2/PVDF/CA Fibers for Photocatalytic Degradation of Dyes by Centrifugal Spinning	24
Sustainable Active Food Packaging: Biodegradable Nanofibrous Mats Incorporated Spent Pumpkin Carbon Dots for Enhanced Shelf Life	24
Effects of EVA Content on Properties of PP/EVA Blends and Melt-blown Nonwovens	23

Recycling of Waste Polyethylene Fishing Nets as Fibre Reinforcement in Gypsum-based Materials	22
Effect of Polyurethane Treatment on the Interfacial and Mechanical Properties of Basalt Fiber-Reinforced Polymer Composite	22
Evaluation of Smart Piezoelectric Composite Material-Based Active Vibration Cancellation (AVC) System Performance For Highway Driving Vibration of Vehicle Interior Using Time–Frequency Wavelet Transfo	22
Preparation of Robust Aramid/Epoxy Composites through Enhancing the Interface Performance by Nanocoating Solution	22
Enhancing Antibacterial Performance of Viscose Spunlaced Nonwovens by Wormwood Extract Microcapsule Finishing	20
Preparation and Characterization of Ethylene Vinyl Acetate-Based Composites from Footwear Scraps and Peanut Fiber for Value-Added Products	20
Thermosensitive Cotton Textile Loaded with Cyclodextrin-complexed Curcumin as a Wound Dressing	20
Fiber-microsphere Binary Structured Composite Fibrous Membranes for Waterproof and Breathable Applications	20
The Impact of the Alkali-Bleaching Treatment on the Isolation of Natural Cellulosic Fibers from Juncus Effesus L Plant	20
A Sustainable and Effective Bioprocessing Approach for Improving Anti-felting, Anti-pilling and Dyeing Properties of Wool Fabric	19
Mechanical, Viscoelastic and Soil Degradation Performance of Hemp Fiber Reinforced Bio-PBS Composites Developed via Microwave Processing	19
Dyeing of Silk with Natural Lac Dye from Laccifer lacca Kerr. and Evaluation of Antibacterial and UV-Protective Properties	19
Biomimetic Construction of PBO Fiber Hierarchical Reinforcement with Simultaneously Enhanced Interfacial Properties and Atomic Oxygen Erosion Resistance for Advanced Composites	19
Sustainable Polymer Acoustic Composites from Waste Cotton, Coffee Husk, and Sawdust for Functional Applications	18
Preparation and Properties of Water-Resistant Antibacterial Curcumin/Silver Composite Nanofiber	18
Modifying Porous Bacterial Cellulose with Chondroitin Sulfate/Gelatin for Improved Biocompatibility	18
Polyelectrolyte Complex Coacervates: Structural Insights, Rheological Perspectives, and Industrial Applications	18
Effect of Gel-spun Solution Concentration on the Structure and Properties of UHMWPE Monofilaments with Coarse Denier	17
Impact Behavior of Shape Memory Alloy Hybrid Composites under Different Temperatures	17
Development of 3D Printed Biodegradable Poly-lactic Acid/Polyurethane Foams/Milled Glass Fibers of Sustainable Composites with Application on Helmet	17
Improving the Thermal Conductivity of Polymeric Nanofiber Web through the Incorporation of Boron Nitride Nanosheets	17
Preparation and Properties of Functional Fabric Coating Based on SiO2-aerogel/Polyurethane	17
Solution-Blown PA6- and PVDF-Based Nanofibrous Composite Mats for Aerosol Filtration	16
Laser-Assisted Melt Electrospinning of Poly(L-lactide-co-ɛ-caprolactone): Effect of Laser Power on Spinning Behavior and Fiber Structure Formation	16
Multifunctional Polyacrylonitrile-based Pearl Nanofibrous Membrane Prepared by Electrospinning	16
Dyeing of Recycled Electrospun Polyamide 6 Nanofibers: Implications of Dye Particle Size	16
Deep Eutectic Solvent Dyeing of Cellulose Acetate Nanofibers with Disperse Dyes: Kinetics, Isotherm, and Thermodynamic Studies	16
Mechanical Properties of Tow Prepreg Applied to AFP using Surface-tackiness	16
Preparation and Properties of Electrospun Polyimide Ultrafine Fibrous Mats with Excellent Heat-fusibility via Hot-press procedure from Organo-soluble Polyimides Containing Phenolphthalein Units	16
CuWO4/Ti3C2 MXene Heterostructure: Fabrication and Immobilization into a Photocatalytic PVDF Membrane	16
Modeling the Geometry of Weft-knitted Integrated Preforms as Reinforcement of Composite Joints	16
Predictability of Pressure Characterization of Medical Compression Stockings (MCSs) Directly Based on Knitting Parameters	15
Effect of the Interfacial Bonding Performance Between Coir Fiber and Epoxy Resin Matrix by Adding Adhesive Layer	15
Manufacturing of Bio-Based TPU/CNT Composites Using Solvent-Free In-Situ Polymerization for 3D Printing Filament Applications	15
Interface Properties of Epoxy and Polyurethane Mutually Sized Carbon Fiber Reinforced Composites	15
A Quantitative Model Investigation on Degradation of CF/EP Composites	15
Chitin Whisker/Dopamine Enhancing In-Situ Generation of Silver Nanoparticles for Fabricating Functional Silk Fabrics	15
Physicomechanical Characterization of Poly(acrylic acid-co-acrylamide) Hydrogels Reinforced with TEMPO-oxidized Blue Agave Cellulose Nanofibers	15
Preparation and Characterization of Disorderly PCL Crystal Lamellae Electrostatic Direct Writing Scaffolds with Polydopamine Coating	15
Prediction of Macroscopic Compressive Mechanical Properties for 2.5D Woven Composites Based on Artificial Neural Network	15
Development and Evaluation on Thermoregulating Sleeping Bags with Phase Change Viscose Fiber	15
Statistical Analysis of a Woven Fique-Reinforced Biocomposite Using Mechanics of Structure Genome Homogenization	14
Effect of Thread Count on the Shear Mechanical Properties and Dynamic Mechanical Properties of Shape Memory Polymer Reinforced by Single-Ply Weave Fabric	14
A Green Dual Function Engineering Material—Sound Absorption and Heat Insulation Based on Water Hyacinth Fiber and Waste Palm Oil	14
Ballistic Penetration Behaviours of Full-Width Weft Insertion Fabric Reinforced Flexible Composite	14
Comparative Study of Water-soluble and Non-water-soluble Wool Keratin from Ionic Liquid Analogue	14
Experimental Study on Flexural Properties of FRP Foam Sandwich Plates in Hot and Humid Environment	14
Effects of Functionalized Multi-walled Carbon Nanotubes on the Performance of Wood–Plastic Composites	14
Study on PET Recovery from Polymeric Mixtures, Using the Floatation Technique, and Valorization of the Collected Particles by Dyeing Them	14
The Collapse of Fully Hybrid and Sectionally Hybrid Cylindrical Energy Absorbers under Impact Loading: An Experimental and Simulation-based Investigation	14

Preparation and Electrothermal Energy of Polypyrrole/Carbon Fiber Paper-Based Composites	14
Mothproofing Protection of Wool Fabric Against A. verbasci Using Eucalyptus camaldulensis, Rosmarinus officinalis, and Pinus brutia Extracts Through Pentagonal Design	14
A Study on Thermal Comfort Properties in Knit Fabrics Made from Cattail and Cotton Blends	13
Energy Absorption Performance of 3D-Printed Windowed Structures Under Quasi-Static Axial Loading Condition	13
Highly Stable, Stretchable, and Sensitive Strain Sensor Based on a New Type of Elastic Fiber	13
Carcinogenic Methyl Orange Dye Sequestration Using Boron Carbide-Filled-Polypyrrole Composites from Wastewater	13
Investigating the Impact of Different Loading Modes on the Mechanical Behavior of a Semi-crystalline Polymer	13
Analysis of the Role of the Structural Characteristics of Surgical Meshes on the Tensile Properties in Different Directions	13
Analysis of the Compression Performance of Weft-knitted Spacer Fabrics for Protective Applications in View of the Surface Layer Structure	13
Investigating the Influence of Stacking Sequences on the Physical and Mechanical Characteristics of Coconut Coir Fiber-Reinforced Unsaturated Polyester Composites	13
An Investigation on the Effect of Humidity on the Mechanical Properties of Composite Materials Based on Polymethyl Methacrylate Polymer Optical Fibers (POFs)	13
Preparation of NH2-MIL-101(Fe)@Viscose Spunlaced Nonwoven Porous Carbon Material for Organic Dye Adsorption	13
Impact of NaOH Treatment on the Chemical, Structural, Physico-mechanical, and Thermal Characteristics of Jute Species	13
Applicability of Nylon 66 Fabric Dyed with Bromocresol Green as Textile Chemosensor	12
Large Amplitude Hygrothermal Dependent Frequency and Post-Buckling Behaviour of Smart Skew Sandwich Shell Panels - A Macromechanical FE Approach	12
Erratum: Piezo-resistive Sensor of Auxetic Structures Based on 3D-Printed TPU Coated by Castor-Oil-Based Waterborne Polyurethane/Graphene	12
Fabrication of Stable Fluorine-Free Hydrophobic Cotton Fabrics with Prominent Antibacterial Property	12
Screening of Vegetal Dyes for Wool Dyeing: Selection of Feasible Alternatives for Industrial Applications	12
Atmospheric Plasma Technique Assessment for the Development of a Polyfunctional End-use Polyester Fabric	12
Photosensitivity Enhancement of Spiropyran-Containing Functional Molecules by Introducing Flexible Spacers and Their Application in Smart Color-Changing Textiles	12
Improvement of Pineapple Leaf Fiber Quality by Pectinase Produced from Newly Isolated Bacillus subtilis subsp. inaquosorum P4-1	12
Alkali Treated Jute Fabrics Suitable for the Production of Inexpensive Technical Textiles	12
SF6 Plasma Surface Modification of Flax Fibers for Improved Adhesion in Polypropylene Composites	12
LbL Fabricated PU/PSS/{201}TiO2 Multilayer Thin Films with Exposed High-Index {201} Facet for Environmental Applications	12
Eco-friendly Indigo Dyeing of 3D-Printed Thermoplastic Polyurethane Material Using Glucose and Calcium Hydroxide	11
Experimental and Numerical Analysis of Mechanical, Thermal and Thermomechanical Properties of Hybrid Glass/Metal Fiber Reinforced Epoxy Composites	11
Poly(ethylene glycol)-Templated Dyeing of Natural Phenol on Silk Fabric via Horseradish Peroxidase-Catalyzed	11
Fabrication of Acorn-Loaded Chitosan/Gelatin Nanofibrous Web to Increase Antibacterial Activity for Wound-Healing Applications	11
Highly Compressible and Lightweight Al2O3/PCNF@ANF Aerogels for Effective Oil Adsorption and Separation	11
Cd-doped SnO2-reduced Graphene Oxide Composite Nanofibrous Mats as CO Gas Sensors	11
Strength and Progressive Failure Predictions of T-Joint Laminated Composites Using 3D Continuum Damage Modeling	11
Erratum to: Cold Atmosphere Plasma Modification on Beta-Carotene-Loaded Nanofibers to Enhance Osteogenic Differentiation	11
Preparation and Properties of Dye-Sensitizing Graphene/TiO2 based Photocatalytic Composite Film by Electrospray Method	11
Effect of Low-Cycle Fatigue and Hydrothermal Aging on Tensile Properties of Open-Hole Glass Fiber/Polycarbonate and Glass Fiber/Polyamide 6 Composites	11
Choline Chloride-based Deep Eutectic Solvents for Degradation of Waste Cotton Fibrics to 5-Hydroxymethylfurfural	11
Unidirectional Wettability Performances of Weft-knitted Fabric Based on Yarn Structure	11
A Novel Cotton Scouring Using Pectinase in Combination with Fenton System	10
Valorization of Henna and Catechu Natural Dye in Preparation of Mosquito-Repellent Multifunctional Cotton	10
Removal of Organic Dyes from Aqueous Solutions by Adsorption of Chitosan-Guar Gum-Based Glyoxal Crosslinked Hydrogel	10
Nylon/PVDF Spacer Fabric with Acoustic-Electric Conversion and Yarn Resonance Effect for Improved Low-Frequency Sound Absorption Property	10
Investigation of Mechanical Properties of Recycled Textile Waste Bio-Epoxy Composites for the Replacement of Traditional Materials Used in Structural Applications	10
Hybrid Metal/Composite Structures Under Quasi-static Axial Compression Loads: A Comparative Study	10
Effects of Hygrothermal Aging on the Flexural Properties of Cross-Ply and Angle-Ply CFRP Composite Laminates	10
Research on Cotton Yarn Based on Synchrotron Radiation 3D Micro-CT Imaging	10
Effect of Tilt Angle Compression on the Failure Performance of Thin-Walled Tubes	10
Synthesis and Characterization of the Temperature Controllable Shape Memory of Polycaprolactone/Poly(ethylene terephthalate) Copolyester	10
Enhanced Pigment Dyeing and UV Protection of Polyester Fabrics Using Sericin Encapsulated PB 15:3	10
Study on the Characteristics of Vacuum-Bag-Only Processed Composites by Prepreg/Fiber Interleaved Layup	10
Virtual Simulation Design of Mazu Clothing Based on Digital Technology	10
Hybrid Bio-composites Reinforced with Natural Wood Saw Dust and Eco-friendly Graphite: Evaluation of Physical, Mechanical, and Thermal Properties	10
Concurrent Dyeing and Finishing of Textile Fabrics Using Chemically Modified Peanut Red Skin Extract	10
How Do Silicon Carbide Nanoparticles Affect the Crashworthiness Performance of Glass/Epoxy Composite Tubes?	10
Comparison of Innovative Silver Nanoparticles Finishing Technologies to Obtain Antibacterial Properties of Cotton Fabric	10
Fabrication and Characterization of Antibacterial Suture Yarns Containing PLA/Tetracycline Hydrochloride-PVA/Chitosan Nanofibers	10
Influence of Rice Husk Particles on Mechanical and Vibration Damping Characteristics of Roto-Molded Polyethylene Composites	10
Selectively Reinforced Functionally Graded Composite-like Glass/Carbon Polymer Nanocomposites: Designed for Efficient Bending and Impact Performance	10
Fabrication of Durably Superhydrophobic Cotton Fabrics by Polystyrene Latex Particles and Polydimethylsiloxane via Mist Polymerization Technology	10
Continuous Pad Dyeing of Cotton Fabric in a Non-Aqueous Medium for Realizing Ultra-High Fixation and Washing-Free	10
In Vitro Properties of Electrospun Composite Fibers Containing Boric Acid and Enhanced with Epidermal Growth Factor for Wound Dressing Applications	9
Bleaching of Blended Fabrics Containing Calcium Alginate Fibers Based on Alum/NaOH/H2O2	9
Analyzing and Improvising KOH-Treated Jute Fibre Composites for the Medical Equipment	9
Effect of Multiple Sheath Rovings on Cotton Core-Spun Yarn Structure: a Comparative Analysis of Roving Distances	9
Reel-to-Reel Coating of a Conductive Polymer on Synthetic Textile Yarns in a Semi-closed Batch Oxidative CVD System	9
The Interface Adhesive Properties and Mechanical Properties of Shape Memory Alloy Composites	9
Behaviour of Stretch Denim Fabric under Tensile Load	9
The Influence of Alkaline Treatment on Delamination resistance of Woven Flax Fiber-Reinforced Epoxy Composite Laminates	9
Modeling the Static Puncture (CBR) Properties of Non-woven Geotextiles Based on Neural Network and Multi-optimization	9
Study on the Effects of Knitted Fabric Parameters on Fragrance Retention Performance	9
Comparative Studies on Curcumin and 5-FU Incorporated Nanofibrous Scaffolds for Cancer Treatment	9
Stability Improvement of Betalains Recovered from Red Dragon Fruit Peels (Hylocereus polyrhizus) by Cellulose-Based Encapsulation	9
Numerical Investigation on the Design and Optimization of Stacking Pattern for High Flexural Performance Carbon Fiber Reinforced Resin Matrix Composites	9
Cell Type, Compression Performance, and Thermal Performance of Rigid Polyurethane Foam: Effects of Egg Shell Content and Size	9
Removal of Bioaerosols Using Metal-Organic Frameworks Incorporated into Electrospun Nanofibers	9
A Novel Instrument for Testing the Frictional Properties of Fabric Surfaces	9
Erratum: Hybrid Electrospinning Printing for Nanofiber Self-Supporting 3D Microfluidic Devices	9
Fatigue Behavior of Carbon Fiber Woven Composite Laminates with Different Off-Axis Angles Studied by Combining Infrared Thermography	9
Self-Healing MXene/Polymer Composites for Healthcare Applications	9
All-aqueous-processed Silk Fibroin/Chondroitin Sulfate Scaffolds	9
Effect of Double-Vacuum-Bag Process on the Void Evolution in Composite Laminates	9
Investigating the Interlaminar Fracture Toughness of Glass Fiber/Epoxy Composites Modified by Polypropylene Spunbond Nonwoven Fabric Interlayers	9

Eco-friendly Approach for Dyeing Synthetic Fabrics with Natural Dyes Using Electron Beam Irradiation	9
Synthesis and Application of High-Washability 4-Amino-4′-Fluorosulfonylazobenzene Disperse Dyes to Cellulose Diacetate for High Color Fastness	9
Mechanical and low-velocity impact properties of sandwich Carbon/Alfa and Kevlar/Alfa fiber-reinforced epoxy for wind turbine blade	9
Development and Characterization of Silica and PVA–TiO2-Coated Cotton Fabrics for Enhanced Hydrophobicity, Antibacterial Activity, and UV-Protective Properties	9
Adsorption of Cd2+, Cu2+, and Ni2+ with Modified Silk Fabric	9
A Data-Driven Approach for Predicting Industrial Dyeing Recipes of Polyester Fabrics	9
Effect of Various Surface Treatments Applied on Glass Fiber Post and Universal Adhesives on Microtensile Bond Strength and Investigation of Surface Properties with EDX	9
Dynamic Modeling and Performance Evaluation of Using Spacer Fabrics as Shock Absorbers in Helmet of the Car Passenger	9
Effect of Structural Parameters on the Auxetic Behavior of Weft-Knitted Fabrics Based on Foldable Structures	9
In Situ Coloring and Antibacterial Finishing of Silk Fabrics Through Fenton-Induced Deposition of Caffeic Acid and Silver Nanoparticles	8
Fabrication of an Anisotropically Flexible Carbon Fiber Reinforced Composite Panel	8
Calophyllum inophyllum Oil: Encapsulated PCL/POX Electrospun Membrane for Antibacterial Wound Dressing Applications	8
Computational Modeling of Auxetic Woven Fabric Using Rotating Rectangle and Chiral Geometry	8
Metal–Organic Framework-Based Self-Supporting Porous Materials for Particulate Matter Filtration: A Review	8
Novel Flame-retarded Novolac Matrix Hybrid Composites with Graphite Particles and Glass Fiber Reinforcement	8
Bending and Shear Property of Fabrics Produced from Trevira CS and Its Blends	8
Crashworthiness Performance of Thin-walled Glass/Epoxy Square Tubes with Circular Cutouts: An Experimental Study	8
Investigation and Performance Study of Hibiscus sabdariffa Bast Fiber-Reinforced HDPE Composite Enhanced by Silica Nanoparticles Derived from Agricultural Residues	8
Tannin–Thioctic Acid Network Hydrogels with Antibacterial and Hydrophobic Properties	8
Screen Printing with Natural Dye Extract from Japanese Knotweed Rhizome	8
Physical and Mechanical Characterizations of Hybrid Twill Fabrics Carbon/Glass and Carbon/Aramid	8
Fabrication of Endothelial Cell-Lining Polyurethane/Polycaprolactone Tubular Scaffold Coated with Conjugated Linoleic Acid for Small-Diameter Vascular Graft	8
Exploring the Mechanical, Thermal and Morphological Characteristics of Lignocellulosic Sustainable Hybrid Composites from Acacia arabica and Ricinus communis for Automobile Applications: Effect of Fib	8
Influence of Alkaline/Hydrogen Peroxide Treatment on the Properties of Different Natural Cellulosic Fibers	8
Paste Stability and Desizability of Poly(Sodium Allyl Sulfonate)-g-Starch-g-Poly(Ethyl Acrylate) Used as Warp Sizing Agent	8
Investigation of Microwave and Structural Properties of Carbon Veil-Based GFRP Composite for Stealth Applications	8
High-Strength and Stretchable Fabric-Reinforced Hydrogel Composites: Their Applications on the Removal of Methylene Blue	8
Investigation of the Effects of Applying Gamma Irradiation as a Pre-treatment to Cotton Printed Fabric	8
Tensile Experiment and Numerical Simulation of Carbon Fiber and Polyvinyl Alcohol Fiber Helical Auxetic Yarns	8
Tailoring of Gelatin-Chitosan Nanofibers Functionalized with Eucalyptus Essential Oil via Electroblowing for Potential Food Packaging and Wound Dressing Applications	8
Fabrication of a Flexible Si-cotton Filter Membrane for Efficient Hot Oil/Hot Water Separation	8
Constructing Hierarchical Porous Bacterial Cellulose Outer Layer for Enhanced SMCs Infiltration in a Double-Layered Vascular Graft	8
Investigation on Flexural Properties of Intra-layer Hybrid Composite Laminates Reinforced with Carbon and Glass Fibers	8
Research on Mechanism, Properties, and Application of Oxidized–Stretched Wool Fiber	8
Fabrication of a Thermoregulating Cotton Fabric with Enhanced Flame Retardancy via Layer-by-layer Assembly	8
Synthesis and Antibacterial Activity of Azo-Sulfa-Based Disperse Dyes and Their Application in Polyester Printing	8
Fiber Metal Laminates Based on Natural/Synthesis Fiber Composite for Vehicles Industry: an Experimental Comparative Study	8
Miniaturization of Palladium and Gold in Nanosize to Hold Immense Potentiality for Application in Wool Functional Finishing	8
Synthesis, Application, and Recovery of Alkali-Clearable Disperse Dyes Containing Azo Pyridone Structure	8
RAFT Reaction Modified Cotton Fabric and Its Application for Oil/Water Separation	7
Structure and Properties of Thermally Stabilized and Ecologically Friendly Organic Cotton Fibers as a New Activated Carbon Fiber Precursor	7
An Environmentally Sustainable Dyeing Approach for the Production of Ecofriendly Colored Wool Yarns via the Application of Millettia laurentii Natural Dye in Conjunction with Metal Salts and Biomordan	7
Muslin Deweaving through Combined Mechanical, Thermal and Chemical Methods	7
Experimental and Simulation Investigation on the Effect of Slot Angle on the Flush Sharp Die Performance during Melt Blowing	7
A Comparative Study of Thermoelectric Properties of Various Polypyrrole-Coated Textiles	7
Highly Antibacterial Efficacy of a Cotton Fabric Treated with Piperazinyl Schiff Base	7
Synthetic Oligomers with Urea Binding and their Role as Crosslinkers in Improving the Printing Quality on Cotton Fabric	7
Fabrication of Glass/Jute Hybrid Composite over Wrapped Aluminum Cylinders: An Advanced Material for Automotive Applications	7
Study on Temperature and Humidity Stability for Melt-blown Polylactide Electret Nonwovens	7
Electrospun PVC/Graphene Composite Nanosponges for Oil Spill Cleanup	7
Optimization of Water-Repellent Finishing of Polyester/Viscose Fabric by Plasma Pretreatment Using Response Surface Methodology	7
Analysis and Development of the CFRP Boring Bar for Stability Improvement	7
Preparation of the Garlic Oil Microcapsule/CS/PVA Nanofiber Membrane and the Antibacterial Properties	7
Thermal Comfort Properties of Sport Fabrics with Dependency on Structure Parameters and Maintenance	7
Application of Tectona grandis Leaf Extract for Efficient and Stabilized Coloration of Mulberry Silk Fabric	7
Study on Degradation Mechanism of Carbon Fiber-reinforced Anhydride-cured Resin-based Matrix Composites by a Benzyl Alcohol/NaOH System	7
Hyperbranched Waterborne Polyurethane Solid–Solid Phase Change Material for Thermal Energy Storage in Thermal Management Fabric	7
Changes in Illumination Preferences for Textiles with Varying Physical Color Attributes	7
Superhydrophobic Ag/Viscose Non-woven Fabrics with Excellent Electric Heating and High-efficient Electromagnetic Interference Shielding	7
A Modified Hand-Held Force Meter to Measure Yarn Tension in the Ring Spinning Process	7
Fiber-Reinforced Thermoplastic Composites for Future Use in Aircraft Radomes: Biomimetic Design Approaches and Its Performances	7
Multi-objectives Statistical Optimization and micro-mechanics Mathematical Modelling of Musa Acuminate fibre-vinyl Ester Composite Reinforcement	7
Preparation and Characterization of Chitosan/Hydroxyapatite Nanowire Composite Scaffolds for Bone Regeneration	7
Effect of Drawing Conditions on Crystal Structure and Mechanical Properties of Melt-Spun Polylactic Acid Fibers	7
Antimicrobial Finishing of Cotton Fabric with N-MA Based on Plasma-Induced Grafting	7
A Simple Method to Synthesize Three-Dimensional Network Adsorbent of Nanocellulose Dispersed Fe(OH)3 for Enhanced Adsorption of Congo Red	7
Development of Banana Pseudostem Supported Polymeric Adsorbent for Effective Removal of Cationic Dyes from Wastewater	7
Comparative Analysis of Metal–Thermoplastic Hybrid Circular Structures Under Quasi-static Lateral Loading: Implications for Crashworthiness	7
Influence of MWCNT Fillers on the Elastic Properties of GFRP Hybrid Honeycomb Core: Numerical Study with Experimental Verification	7
The Effect of Sulfates on Properties of Cellulose/Dialdehyde Cellulose/Antarctic Krill Protein Composite Fibers	7
Synthesis of Porous Biocarbon from Artocarpus hirsutus Husks and Its Microwave Shielding Effect on Agave Fiber-Reinforced Vinyl Ester Composite at High-Frequency Bands	7
A Weaving Method to Prepare Double-Layer Janus Fabric for Oil-Water Separation	7
EPDM rubber-reinforced PA6/EVOH composite with enhanced gas barrier properties and injection moldability for hydrogen tank liner	7
The Effect of Graphene Oxide Inclusion on the Mechanical, Thermal Properties of Polyamide 6	7
Batch Fabrication and Characterization of ZnO/PLGA/PCL Nanofiber Membranes for Antibacterial Materials	7
Exploring the Role of Ag Nanoparticle Distribution in Novel pH-Sensitive Nanofibers Containing Hyaluronic Acid for Enhanced Wound Healing with Sustained Curcumin Release	7
Color Fastness and Tensile Properties of Cotton Fabric Dyed with Extract from Albizia Procera Sawdust	7
Collapse Behavior and Energy Absorbing Characteristics of 3D-Printed Tubes with Different Infill Pattern Structures: An Experimental Study	7
Polymer-Initiated Synthesis of Silver Nanoparticles for Coloration and Functionalization of Cotton Fabrics	7
Flexibility and Thermal Storage Properties of Polyurethane Adhesive Supported Phase Change Composites Based on Polyurethane Phase Change Materials	7
Color Emotion Factors and Preference of Two-Color Combinations with Contrast Tones by Naturally Dyed Fabrics with Persimmon and Indigo	7
Preparation and Investigation of Fe3O4@rGO/CNF Foams for Electromagnetic Interference Shielding	7
Geometrical Modelling of Herringbone Twill Fabric for Prediction of Thermal Resistance Using Finite Element Method	7
Synthesis, Characterization, and Application of New Reactive Triazine Dye on Cotton and Paper	7
Synthesis and Functionalization of PLA-Knitted Fabrics with Silk Fibroin Nanoparticles and Chitosan: Evaluation of Cytotoxicity and Cell Adhesion	6
Revalorization of Cotton and Cotton/Elastane Knitted Fabric Waste	6
Robust Nanocomposite Films with High Dielectric Insulation from Boron Nitride Nanosheet and Aramid Nanofiber	6
Eco-Friendly Dyeing of Wool Fabrics with Natural Dye Extracted from Citrus Sinensis L Peels	6
A Study on Changes of Sheet Resistance in Conductive Knit Fabrics Using Non-contact Measurement Method	6
Poly(l-lactide)/poly(d-lactide)/bamboo fiber (BF) bio-composites with enhanced heat resistance, mechanical and rheological performance	6
Mechanical and Thermal Expansion Properties of Wood-PVC/LDPE Nanocomposite	6
Simultaneous Superhydrophobic and Photo-catalytic Properties on Polyester Fabric: Prior in-situ Synthesis of Nano ZnO with Subsequent Fluorochemical-based Water Repellent Treatment	6
Synthesis and Application of Spiropyrane-Based Photochromic Dyes for Wool	6
Cytocompatible Xanthan Gum/N-halamine and Chitosan Blending Film with Efficient Antibacterial and Hemostatic Properties	6
Optimization of Flame Retardancy & Mechanical Performance of Jute-glass/Epoxy Hybrid Composites	6