Journal of Industrial and Engineering Chemistry

Article	Citations
The core–shell ZnO@Co-MOF boosting the catalytic performance in the synthesis of glycerol carbonate from glycerol and urea	318
Editorial Board	312
Bifunctional Pt-loaded steel slag matrix composites for the detection and degradation of tetracycline antibiotics	265
Developing a facile process for cobalt recycling from zinc plant residues using various environmentally friendly reductants towards a green and sustainable application in water splitting	139
Amphiphilic-triblock-copolymer-derived protective layer for stable-cycling lithium metal anodes	128
The use of black mass in spent primary battery as an oxidative catalyst for removal of volatile organic compounds	119
IFC (Editorial Board)	118
Corrigendum to “Enhanced morphology and hydrophilicity of PVDF flat membrane with modified CaCO3@SMA additive via thermally induced phase separation method” [J. Indus. Eng. Chem. 107 (2022) 444–455]	118
Effect of phenolic acids on temperature-sensitive property of self-assembly of ionic pair of poly(ethylene imine)/(phenylthio)acetic acid	117
Effect of structure of Pd@Fe core–shell cubes on the enhancement of H2 conversion in direct reaction of H2 and O2	111
Surface and diffusive capacity controlled electrochemistry in nickel boride/nickel borate	106
Licorice (Glycyrrhiza glabra) as corrosion inhibitor of carbon steel reinforcing bars in mortar and its synergic effect with nitrite	106
Antibacterial properties of reduced graphene oxide fibers fabricated by hydrothermal method	105
Increasing in the heat resistance efficiency of filters using hydrophobic PVA/PEO/PTFE/SA nanofiber and PTFE nanoparticle composite	104
Assessing the environmental risk potential of transformation byproducts formed during fungal enzymatic treatment of a pharmaceutical mixture	100
HKUST−1 loaded Ag/TiO2 nanoparticles/graphene oxide composites modified sensor for sensitive detection of nicotine in electronic cigarette liquids	99
Nucleus targeting-functionalized cell-membrane nanovesicles for intranasal delivery of therapeutic plasmid DNA into the brain for the treatment of glioblastoma	98
Feasibility of CO2 capture by MEA solvent in blue hydrogen production from waste plastics	89
Polypyrrole@Pd solar-thermal catalyst for eco-friendly and scalable multiphasic Suzuki coupling reactions	86
Lactic acid from glycerol transformation using Ni0.2Mg3.8Al-LDO embedded AgO/Oxide catalysts without the addition of a base, O2 or H2	86
Highly mesoporous activated carbon fibers using high density polyethylene precursor with a multi-step stabilization technique for automobile carbon canister	84
Study on the effect of the ion-dipole interactions on the polymorphism regulation and filtration performance of PVDF membranes	83
Flexible MIL-53(Al)/Biochar composite for enhanced norfloxacin Removal: Synergistic effects and adsorption mechanisms	82
Reconstruction of electric double layer via sodium persulfate additive for enhanced aluminium-air battery	81
Scalable fabrication of ultrathin high-strength gloves using oxidized cellulose nanofiber-filled acrylonitrile butadiene rubber	81

Solvent-free synthesis of zwitterionic gel electrolytes using 2-methacryloyloxyethyl phosphorylcholine for solid-state supercapacitors	79
CsPbBrxCl3-x/Cs4PbBrxCl6-x core/shell nanocrystals: Blue-emitting perovskite scintillators for X-ray detection	77
An optimal approach of pure/mixed CO2 sequestration with producing hydrated natural gas: Physical insights and validation	76
Advanced dual-wetting membrane for enhanced CO2 capture: Asymmetric hydrophobic and CO2-philic thin film in membrane gas absorption	75
Exploring the direct carbonylation of glycerol with CO2 for sustainable glycerol carbonate production: Current development, challenges and future perspectives	74
Three-wavelength white organic light-emitting diodes on silicon for high luminance and color gamut microdisplays	73
Advance and technical prospects of membrane-based absorption refrigeration system: A comprehensive review	73
Fundamental and recent progress on the strengthening strategies for fabrication of polyacrylonitrile (PAN)-derived electrospun CNFs: Precursors, spinning and collection, and post-treatments	72
A self-healing hydrogel derived flexible all-solid-state supercapacitors based on dynamic borate bonds	71
Transferring hydroformylation reaction into high-pressure gas–liquid microfluidic systems: Key achievements and perspectives	71
Dual-anchor anti-corrosion coating of copper foil for high-speed interconnects	71
Experimental and computational insights into efficiently synthesizing trimethyl orthoformate from calcium methoxide and chloroform	70
Hybrid compound of polyethyleneimine, phytic acid and halloysite nanoclay for improving flame retardancy of wood material	70
Review on advances in adsorption material for mercaptan removal from gasoline oil	69
Iron oxide-immobilized porous carbon nanofiber-based radio frequency identification (RFID) tag sensor for detecting hydrogen sulfide	68
Highly selective PDMS-PVDF composite membrane with hydrophobic crosslinking series for isopropanol-1,5 pentanediol pervaporation	68
Biomimetic functional hydrogel particles with enhanced adhesion characteristics for applications in fracture conformance control	67
Anti-wetting surfaces with self-healing property: Fabrication strategy and application	67
A review of advanced heteroatom-doped graphene and its derivatives materials for photocatalytic applications	67
A green ultrasound-assisted enzymatic extraction method for efficient extraction of total polyphenols from Empetrum nigrum and determination of its bioactivities	66
Magnetic carbon nanotube sorbents with macropores formed by salts for oily wastewater treatment	65
Comparative insights of bio and chemical surfactants in CuO nanoparticle synthesis: Unveiling the superior antibacterial efficacy of biosurfactants	64
Accelerated wound healing by PrO2 incorporated PVA/SA fibers	63
Aptamer-conjugated gold nanoparticles platform as the intracellular delivery of antibodies for cancer therapy	62
Design and optimization of energy supplying system for electric vehicles by mobile charge stations	62
Diblock copolymer worms stabilized pH-responsive Pickering emulsions: An efficient and recyclable platform for Claisen-Schmidt condensation reaction	62
Pretreatments for photoresist-patterned wafer to improve Cu pillar electrodeposition	61
Visible light-responsive YVO4/U6M1/PES composite membrane for rapid dye degradation	61
Constructing mixed matrix membranes for CO2 separation based on light lanthanide fluoride nanosheets with mesoporous structure	61
Accelerating the electrochemical kinetics of Na3V2(PO4)3 cathode for high-performance sodium ion batteries with superior cycling stability by Cl− substitution	60
Pressurized liquid extraction of phenolics from Pseuderanthemum palatiferum (Nees) Radlk. leaves: Optimization, characterization, and biofunctional properties	60
Hydrothermal synthesis of cobalt germanium oxide supported with carbon-based graphitic carbon nitride for electrochemical determination of ornidazole	58
Silver nanowire/partially reduced graphene oxide-based nanocomposite hydrogel system for highly sensitive wearable strain sensor applications	57
Performance of a dynamic single bubbler in single and two-phase immiscible liquids	57
Synthesis of a new nanocomposite with the core TiO2/hydrogel: Brilliant green dye adsorption, isotherms, kinetics, and DFT studies	57
Microwave-assisted condensation approach for vanadium silicate microspheres and their catalytic activity in cyclohexene epoxidation and ethyl lactate oxidation	57
Three-layer coated composite materials PMoV2@UiO-66-X@mSiO2: Efficient oxidative desulfurization catalysts	56
Construction of Mott-Schottky hetero-interface in Ag/Ni-ferrite nanowire with rice husk-derived carbon powder in double layer configuration for enhancing radar-absorption performance	55
Fe(III) and Zr(IV) intercalated titanate nanotubes: A singular solution for efficient remediation of five toxic heavy metal ions from water	55
Enhanced anti-microbial activity of ofloxacin-loaded mesoporous silica nanoparticles against clinical isolates of drug-resistant microbes	55
Mxene structure: A key parameter in corrosion barrier performance of organic coatings	54
Mechanistic exploration and optimization of amoxicillin adsorption using discarded disposable diapers (D3) activated carbon: A multi-analytical approach	54
Development of correlations between deasphalted oil yield and Hansen solubility parameters of heavy oil SARA fractions for solvent deasphalting extraction	54
Template-free hydrothermal synthesis of hollow alumina microspheres and its excellent catalytic properties for thiolation	54
Optimization and kinetics study for methylene blue adsorption with GO incorporated waste polystyrene: ANN and BBD studies	53
A smart superwetting PET-Anthocyanin membrane for pH monitoring in water and emulsion separation	53
Efficient removal of Pb(II) and Cd(II) from water by polyethyleneimine-amidated sepiolite-sodium alginate composite microspheres: Characterization and mechanistic analysis	52
Enhanced interfacial adhesion and bioactivity of inorganic and organic scaffolds with functionalized oligomer-contained 3D printable hydrogels	52
Development and properties of bio-based rice oil microcapsule and its dispersibility in emulsified asphalt	52
Proton conducting sulfonated polysulfone and polyphenylsulfone multiblock copolymers with improved performances for fuel cell applications	51

Near infrared lipid droplet specific fluorescent probes based on phenothiazine derivatives for wash-free imaging and diagnosis of non-alcoholic fatty liver	50
Biosorptive removal of organic dyes using natural gums-based materials: A comprehensive review	50
Facile control of surface properties in CeO2-promoted Mn/TiO2 catalyst for low-temperature selective catalytic reduction of NO by NH3	49
Design strategies of supported metal-based catalysts for efficient oxidative desulfurization of fuel	49
Carbon nanodots: Synthesis, mechanisms for bio-electrical applications	49
Two-dimensional (2D) material nanofiltration membranes for effective recovery of lithium	48
A 10 years-developmental study on conducting polymers composites for supercapacitors electrodes: A review for extensive data interpretation	48
Harnessing nitrogen doped magnetic biochar for efficient antibiotic adsorption and degradation	48
Chitosan-furosemide/pectin surface functionalized thin film nanofiltration membrane with improved antifouling behavior for pharmaceutical wastewater treatment	47
Solvent-engineered synthesis of sulfide solid electrolytes for high performance all-solid-state batteries	47
Polydiacetylene/Zn2+/ZnO nanocomposites for colorimetric detection of cationic surfactants: Effects of ZnO ratios, solvents, and stimuli structures	47
Self-formation of protective layer on carbon steel surface in 1 M HCl solution containing Barringtonia acutangula leaf extract	47
Mof-enabled pesticides as developing approach for sustainable agriculture and reducing environmental hazards	46
Unveiling the swelling behavior of κ-carrageenan hydrogels: Influence of composition and physiological environment on drug delivery potential	45
Preparation and characterization of aliphatic polycarbonate membrane for CO2 gas separation application	45
Insight into the anti-corrosion performance of Acanthopanax senticosus leaf extract as eco-friendly corrosion inhibitor for carbon steel in acidic medium	45
Efficient transformation of 1,2-propanediol to acetic acid with hydroxyapatite supported Pt/CoO nanoparticle catalysts in mild, base-free conditions	45
Novel electrochemical sensing platform for accurate detection of benzylpenicillin based on a graphene oxide-manganese ferrite modified carbon paste electrode	45
Mannich bases: Chemical structure, chemistry, coordination bonding and application in aqueous phase corrosion protection	45
Highly effective induction of cell-derived extracellular matrix by macromolecular crowding for osteogenic differentiation of mesenchymal stem cells	44
Synergistic NH3 adsorption on a bimetallic CuCoBTC series via Lewis acid–base interaction and DFT analysis	44
Integrating smartphones in digital tracking of pH for biotechnological applications	44
Editorial Board	44
Poly(aniline/aminophenol)-wrapped graphene nanoplates loaded with gabapentin inhibitor as a filler in poly(aniline/vinylalcohol/aminophenol)/acrylic coating to endow corrosion/wear durability by tripl	44
Eco-friendly electrospun nanofibers for air filtration enhanced by TiO2 nanoparticles reactive phases for superior capturing the emitted polycyclic aromatic hydrocarbons (PAHs)	44
Experimental study and analysis on physicochemical properties of coal treated with clean fracturing fluid for coal seam water injection	43
Study of oxygen reduction reaction on binuclear-phthalocyanine with Fe-Fe, Co-Co, and Fe-Co dual-atom-active sites using density functional theory	43
Chitosan biomolecules-modified graphene oxide nano-layers decorated by mesoporous ZIF-9 nanocrystals for the construction of a smart/pH-triggered anti-corrosion coating system	43
Editorial Board	43
Dewetting-driven self-assembly of web-like silver nanowire networked film for highly transparent conductors	43
Exhaust gas based nanoarchitectonics for porous carbon materials for high-performance supercapacitor	43
Air and moisture stable robust bio-polymeric palladium catalyzed C C bond formation and its application to the synthesis of fungicidal	42
Effects of the resultant force due to two-phase density difference on droplet formation in a step-emulsification microfluidic device	42
Facile preparation and characterization of tough poly(vinyl alcohol) organohydrogels with low friction and self-cleaning properties	42
Improved ionic and mechanical properties of ion-exchange membrane with an ionic silica network for high-performance ionic polymer-metal composites	42
Enhanced photocatalytic activity by loading Zn0.5Cd0.5S quantum dots onto flower-like BiOI under visible light	42
Random wrinkle structures for spectrum preserved warm white organic light emitting diodes	42
Electrochemical activation of persulfate for the degradation of 1,4-dioxane: single- and two-compartment systems	42
Regeneration and sulfur recovery of Lanxess Lewatit AF 5 catalyst from the acidic Albion leaching process using toluene and tetrachloroethylene as organic solvents	42
Interfacial behavior and extraction kinetics of phages in a salting-out extraction system of ammonium citrate and ethyl acetate	42
Fabricating patterned microstructures by embedded droplet printing on immiscible deformable surfaces	41
NiCoSe4@CFF with excellent properties prepared by microwave method for flexible supercapacitors and oxygen evolution reaction	41
Characterization of highly stable water-based magnetorheological gel using OPTIGEL-WX as an additive: The study of magneto-induced rheological and viscoelastic properties	41
Electrocoagulation treatment of paint wastewater from equipment cleaning and conversion of by-product sludge into nano-pigment	41
Optimization of magnetic polyurethane composite PU/OA@Fe3O4 synthesis for enhanced treatment of municipal wastewater using response surface methodology	41
Enhanced ionic conductivity of composite solid electrolyte by directionally ordered structures of linear Li1.3Al0.3Ti1.7(PO4)3	40
Lowering polyhydroxyalkanoate bioproduction costs in mixed cultures through integrated optimization of organic loading rate, sludge retention time and biomass withdrawal	40
Theoretical study of SF6 decomposition products adsorption on metal oxide cluster-modified single-layer graphene	40
A multi-approach study on CO2 absorption in packed beds: Theoretical, experimental, and CFD perspectives on gas phase pulsation	40
Plasma-enabled methane upgrading in a gas-liquid reactor: Optimizing a one-step methanol production process	40
Catalytic performances and leaching behavior of typical natural iron minerals as electro-Fenton catalysts for mineralization of imidacloprid	40
A nanobridge strategy to fabricate multifunctional silicone rubber nanocomposites with synergy interplay in enhancing thermal conductivity via BNNS-GO-PDA@MWCNT ternary fillers	40
Optimizing influential phase separation parameters on polyethersulfone/ Fe3O4/ZnO membranes for environmental wastewater	40
Constructing Mo2C/MoS2 heterojunction nanostructure as outstanding catalysts for CO2 hydrogenation	40
Superior green corrosion protection of mild steel in acidic medium using Tilia platyphyllos extract: Electrochemical and surface studies	40
Dual biopolymer systems for structuring oil-in-water emulsions: Engineering insights into phycocyanin–chia mucilage mixtures	40
Production of high purity magnetic nickel powder from spent DRI catalyst via cementation method	40
Advances in photochemical splitting of seawater over semiconductor nano-catalysts for hydrogen production: A critical review	39
Surface engineering of tin dioxide through chitosan: Band-gap tuning of spherical structure with oxygen vacancies for enhanced antibacterial therapeutic effects	39
Grafting aryldiazonium cations to copper: Insights into wettability behavior of a highly hydrophobic coating with enhanced corrosion performance	39
Enhancing high-temperature corrosion resistance of mild steel in H2SO4 using synergistic inhibitor systems	39
Tetracycline degradation using combined system of dielectric barrier discharge air plasma and zeolites synthesized at different Na2O/SiO2 ratios	39
Recent advances in membrane modification for microalgae dewatering: Strategies and challenges	39
Folate receptor-targetable and tumor microenvironment-responsive manganese dioxide-based nano-photosensitizer for enhancing hypoxia alleviation-triggered phototherapeutic effects	38
Walnut shell derived N, S co-doped activated carbon for solid-state symmetry supercapacitor device	38
The importance of hydroisomerization catalysts in development of sustainable aviation fuels: Current state of the art and challenges	38
Remarkably improved interfacial adhesion of UHMWPE fibers reinforced composite by constructing a three-dimensional stacked nanoparticles structure at interphase	38
Enhanced electrochemical performance of supercapacitor by integrating hierarchical oxygen-rich carbon nanotube aerogel with layered MoS2	38
Selective separation of Pt(IV) and Ru(III) from the simulated leach liquor of spent electrocatalyst in fuel cells using ionic liquid	38
Degradation of organic dyes by utilizing CaCu3Ti4O12 (CCTO) nanoparticles via tribocatalysis process	38
Melamine based novel polymer for detection of m-CPBA and its concomitant corrosion inhibition behaviour	38
Samarium, nitrogen co-Doped carbon dots for detection of Epinephrine: Theoretical and experimental	38
Lipid nanocarriers for RNA and DNA therapeutics: Next-generation delivery strategies in precision medicine	37
Zn-doped aerogel for Ni2+ adsorption (Zn-A-Ni) and reuse of Zn-A-Ni to create Zn, Ni-co-doped carbon aerogel for applications in adsorption and energy storage	37
A dendrite-free anode for stable aqueous rechargeable zinc-ion batteries	37
Enhancement of catalytic N2O decomposition by modulating oxygen vacancies over Cu/Ce1-XYX catalysts	37
Effective treatment of high-arsenic smelting wastewater: Immobilization arsenic and synthesis well-crystallized scorodite	37
The carbonation and hardening properties of larnite, åkermanite and merwinite in steel slag: A study from experiments and DFT calculations	36
Simultaneously photocatalytic removal of Cr(VI) and metronidazole by asynchronous cross-linked modified sodium alginate	36
Closed-loop bioleaching for mobile phones from the bioregeneration of the leaching agent to the recovery of metal: A review	36

Wood-derived porous carbon foams filled with Ti3C2TxMXene/CoFe-MOF for electromagnetic shielding with flame retardant, heat insulation and excellent cycle stability	36
ZrW2O8 nanorod-based electrode material in redox additive electrolyte as a battery-type symmetric supercapacitor system for energy storage applications	36
Sequestration of Ni2+ and Zn2+ utilising agricultural biowaste-based amorphous M−SiO2 and modified green M−SiO2/Fe3O4 nano-adsorbents: Modelling and electroplating wastewater performance	36
Fluorination methods and the properties of fluorinated carbon materials for use as lithium primary battery cathode materials	36
Bifunctional porous organic polymer: Selective detecting of Fe (III) ion and reversible capturing iodine	36
Effective hydroquinone detection using a manganese stannate/functionalized carbon black nanocomposite	36
Rational design of platinum assimilated 3-D zinc cobalt oxide flowers for the electrochemical detection of caffeine in beverage and energy drink	36
Highly synergic adsorption and photocatalytic degradation of walnut shell biochar/NiCr-layered double hydroxides composite for Methyl orange	35
Insights into the synthetic dye contamination in textile wastewater: Impacts on aquatic ecosystems and human health, and eco-friendly remediation strategies for environmental sustainability	35
Effect of silane acrylate on the surface properties, adhesive performance, and rheological behavior of acrylic pressure sensitive adhesives for flexible displays	35
Construction on ionic organic polymers by multi-components reactions: Experimental and kinetics modeling of efficient CO2-fixation and high iodine vapor adsorption	35
Review of contemporary research on inorganic CO2 utilization via CO2 conversion into metal carbonate-based materials	35
Effect of host polarity on efficiency of thermally activated delayed fluorescent and hyperfluorescent organic light emitting devices	35
Zinc-rich polyester powder coatings with iron Phosphide: Lower zinc content and higher corrosion resistance	35
Quercetin-mediated green synthesis of Au/TiO2 nanocomposites for the photocatalytic degradation of antibiotic ciprofloxacin	35
Elucidating the effect of Ce/Zr ratio on high temperature shift activity with sulfur poisoning	35
Study on interfacial reaction between Al2O3-C / ZrO2-C submerged entry nozzle and molten steel with La-Ce alloy	34
Modification of coal tar pitch by solvent extraction for high density C/C composites	34
Sustainably sourced p-coumaric acid-derived bio-based epoxy resins: Functionalized thermosetting epoxy materials with excellent flame retardancy, ultra-high strength, toughness, and transparency	34
A stepwise and selective extraction strategy for the separation and recovery of Al3+ and Li+ from acid leachate of lithium-rich aluminum electrolytes	34
Electrochemical characteristics of dense PVDF-PEGDME polymer electrolytes for solid state lithium-ion batteries	34
Review on integrated advanced oxidation processes for water and wastewater treatment	34
Selective aerobic-oxidation of glycerol to lactic acid over ruthenium-vanadium bimetallic catalysts	34
An amino-functionalized ultra-micropore metal–organic framework using for argon/oxygen adsorption separation	34
State-of-the-art developments in metal/metal oxide and graphene-based nano-hybrid systems for photocatalytic degradation of tetracycline antibiotics	34
Synthesis of graphitic carbon nitride-enhanced manganese oxide microspheres for ultra-sensitive electrochemical detection of mercury (II) in environmental water sample	34
Editorial Board	33
Utilization of substrate specific membrane channels in liposome based biosensors: A nitrite biosensor with NirC nitrite channels	33
One-pot vanadium-based organic frameworks for DEHP effective removal: Relationships between the synthetic strategy, characterization, adsorption and solar-driven photocatalytic activity	33
IFC (Editorial Board)	33
Preparation and characterization of dually fluorescent core–shell particles and dual-sensing membranes for simultaneous detection of pH and dissolved oxygen	33
P-block cathode electrocatalysts: A critical review of their role and impact on oxygen reduction reaction in fuel cells applications	33
Editorial Board	33
Polyethersulfone-TPU blend membrane coated with an environmentally friendly sabja seed mucilage-Cu2 + cross-linked layer with outstanding separation performance and superior antifouling	33
Recent advances in Polyphosphazene-Functionalized MXene composites	33
A hybrid framework of first-principles model and machine learning for optimizing control parameters in chemical processes	33
Editorial Board	33
Investigation on biomimetic mineralization and its effect on MG-63 cell behavior on poly L-lactic acid surfaces through poly (2-methacryloyloxyethyl phosphorylcholine) conjugation	33
Hydration-triggered adhesion switching for transfer printing of conductive patterns using carboxymethylated cellulose nanofibers films	32
Two-dimensional lamellar phosphogypsum/polyethylene glycol composite PCM: Fabrication and characterization	32
Tri-layer hydrogel scaffold supporting co-culture paracrine signaling for accelerated skin repair	32
Development of low-cost and efficient catalysts: Application of nitrogen-doped multi-walled carbon nanotubes loaded with tungsten nitride in zinc-air batteries	32
An integrated porous Ni3S2 electrode assisted by copper with advanced performance for sodium storage	32
Activity analysis of Pd-based catalysts from the performance modeling of polymer electrolyte membrane fuel cells	32
Mefenamic acid modified-release by encapsulation in a k-carrageenan/sericin blend	32
Engineering pKa value of 3° amine for enhanced production of dialkyl carbonate via Se-catalyzed oxidative carbonylation	32
Architecting the Z-scheme heterojunction derived g-C3N4/Gd2O3 composite for visible-light mediated photocatalytic degradation of Ciprofloxacin and Tetracycline	32
Tumor intracellular microenvironment-responsive nanoparticles for magnetically targeted chemotherapy	32
Enhancement of NIR-triggered photocatalytic activity of Ln3+-doped NaYF4@SiO2/Ag@TiO2 nanospheres through synergistic upconversion and plasmonic effect	32
Facile fabrication of SnO2 modified hierarchical BiOI S-scheme heterojunction photocatalyst with efficient activity for carbon dioxide reduction	32
Three-dimensional block assembled wireless rechargeable supercapacitors	32
Selective lithium extraction from spent LiNi0.5Co0.2Mn0.3O2/graphite mixed black powders and regeneration of single-crystal cathodes	32
Highly dense and porous structure generated by 1,2,3-trihydroxy propane in cellulose materials	32
Selective flotation separation of bastnaesite from calcite using p-methyl/methoxy benzohydroxamic acid collectors	31
Investigating the catalytic performance of polyoxometalate immobilized on magnetic chitosan in the oxidative desulfurization process	31
Polyethyleneimine functionalized chitosan nanofiltration membrane for nuclear wastewater decontamination	31
Influence of crosslinking in phosphoric acid-doped poly(phenylene oxide) membranes on their proton exchange membrane properties	31
Graphene derivatives: Properties and potential food applications	31
MgAl-layered double hydroxides decorated with Pd-doped SnS nanoparticles: A novel photocatalyst for efficient dye degradation and Cr(VI) reduction in water	31
Compositionally engineered amorphous InZnO thin-film transistor with high mobility and stability via atmospheric pressure spatial atomic layer deposition	31
Vanillin-derived co-curing agent for enhanced flame retardancy and mechanical properties in epoxy resin	31
A highly efficient multi-stage dielectric barrier discharge (DBD)-catalytic system for simultaneous toluene degradation and O3 elimination	31
High-performance robust graphitic carbon nitride nanosheets embedded membranes for desalination through direct contact membrane distillation	31
Advances in fuel oil desulfurization: A comprehensive review of polyoxometalate catalysts	31
Copper-based deep eutectic solvents (Cu-DES) assisted the VPO catalyst as a structural and electronic promoter for n-butane selective oxidation	31
Advancements in the photocatalytic activity of various bismuth-based semiconductor/Ti3C2 MXene interfaces for sustainable environmental management: A review	31
NiO-LaCoO3 catalysts for biomass pyrolysis to hydrogen-rich gas	31
Investigation of the kinetics of imidacloprid adsorption onto bimetallic Cu-BTC MOF	31
Optimizing modified natural rubber in starch-based hydrogels: A cost-effective approach for high-performance sustainable slow-release fertilizer coatings	31
Synthesis and characterization of ThO2/NiO mixed oxide dispersed hydrophobic polybenzoxazine cross-linked polyaniline nanocomposites for dielectric and EMI shielding applications	31
Dynamics of droplet breakup in unilateral Y-junctions with different angles	30
Synthesis of γ-valerolactone from ethyl levulinate hydrogenation and ethyl 4-hydroxypentanoate lactonization over supported Cu-Ni bimetallic, bifunctional catalysts	30
Study of lithium extraction and fluoride removal from waste aluminum electrolyte by the roasting-leaching method	30
Novel Ti3C2Tx-MXene-embedded, leaf-like ZIF-8 polymeric beads for efficient tetracycline adsorption in batch and continuous systems	30
Experimental and theoretical study of high-flat and stable leveler tetrazolium blue chloride in the thickening process of copper through holes	30
Integrated process for 2,5-furandicarboxylic acid production from fructose via NaCl-promoted dehydration and Au/HT-catalyzed oxidation	30
Size-controlled synthesis of ZIF-8 nanoparticles by high gravity technology for enhanced tetracycline adsorption	30
Experimental and mechanism studies on high CaCO3 fouling inhibition of PTFE coating with enhanced stability and anti-corrosion	30
Electrospun PAN membrane encapsulated in PEO as a polymer electrolyte for lithium metal batteries	30
Polyaniline-wrapped h-boron nitride nanosheets as anticorrosive filler in epoxy coatings for substantially enhanced protection of mild steel	30
Glucose-responsive soluble microneedle prepared with “Gelatin - hydroxyethylcellulose ethoxylate complex coacervate” for the transdermal drug delivery	30
Fabrication of iodine vacancy-modulated dual S-scheme BiOI/BiSI/BiOBr heterojunction for enhanced tetracycline hydrochloride degradation	29
Micromotor-based magnetic micro-solid phase extraction (μM-Mµ-SPE) of Pb(II) and Cu(II) from environmental samples using MOF-74 (Co)@Fe3O4 nanocomposite	29
Study on the transformation of plastic-state to glassy-state worn-out material on the nanowear track region of additively processed copper alloy	29
Graphitic carbon nitride embedded Ni3(VO4)2/ZnCr2O4 Z-scheme photocatalyst for efficient degradation of p-chlorophenol and 5-fluorouracil, and genotoxic evaluation in Allium cepa	29
Sustainability of kraft pulp mills: Bleaching technologies and sequences with reduced water use	29
Multidimensional calcium phosphate coatings for bio activation of titanium implant surfaces using methodological approach	29
Synergistic effect of Cu and Ru decoration on g-C3N4 for electrocatalytic CO2 reduction	29
Waste-to-wealth: Biomass-derived sustainable materials for energy storage applications	29
Ethylene from renewable ethanol: Process optimization and economic feasibility assessment	29
High response triethylamine gas sensor based on flaky W-doped MoO3	29
Improving the interfacial stability, conductivity, and electrochemical performance of Li2MoO3@g-C3N4 composite as a promising cathode for lithium-ion battery	29
Fast and opposite temperature responsivity in release behavior of cocontinuous hydrogel composites	29
Research progress on lithium extraction from salt-lake brine	29
An overview of sustainable lithium-ion battery recycling: Principles, applications, and future directions	29