Journal of Optical Technology

Papers
(The median citation count of Journal of Optical Technology is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Structured media based on magnetic colloids as a promising material for magnetically controllable optical elements16
Optical camera communications: practical constraints, applications, potential challenges, and future directions16
All-fiber temperature and refractive index sensor based on a cascaded tilted Bragg grating and a Bragg grating10
Fabrication of high-Q crystalline whispering gallery mode microcavities using single-point diamond turning9
Systems of generalized harmonic lenses for image formation7
Calculation of refraction angles for various spherically layered atmospheric models6
Diffraction gratings for spectral devices [Review]6
Polarization multiplexing and hybrid modulation based bandwidth efficient NG-PON2 coexisting with GPON and XG-PON6
Luminescence of a complex composed of a quantum dot and a layered plasmon nanoparticle in a magnetic field5
High sensitivity sensors based on open cavity in-fiber Fabry–Perot and Mach–Zehnder interferometers5
Design of a zoom telescope optical system with a large aperture, long focal length, and wide field of view via a catadioptric switching solution4
Performance analysis of differential quadrature phase shift keying modulation schemes for a radio over fiber system4
Influence of 3D helical microstructure shape deviations on the properties of a vortex beam generated in the near diffraction zone4
Study on superachromatism of a quarter-wave retarder for the visible range of the spectrum4
Photo-thermo-refractive glass: a promising photonics material [Review]4
Mach–Zehnder modulator based on a tapered waveguide and carrier plasma dispersion in photonic crystal4
Structural characteristics of internal microcavities produced in optical fiber via the fuse effect4
Research on the performance of a fiber optical current transformer for high voltage filtering capacitor unbalanced current measurement4
1.55-µm range optical transmitter based on a vertical-cavity surface-emitting laser3
Compact periscope-type objective based on wedge-shaped prisms with free-form surfaces3
Femtosecond laser-based absolute rangefinder with the possibility of traceability to the time and frequency standard3
Security of plug-and-play continuous-variable quantum key distribution3
Study on a plane grating spectral imaging system with smile and keystone eliminated3
Automation of the batching process of optical elements in the selective assembly of camera lenses3
Formation of periodic relief structures in thin chromium films using laser interference lithography3
Experiment on a distributed fiber optic interferometric sensing system to monitor and locate urban high-density polyethylene gas pipe leakage3
Remote laser fluorescence method for oil leak detection at an excitation wavelength of 266  nm3
Application of a high-resolution terahertz gas spectroscopy method to compositional analysis of thermal decomposition products of human fluids (urine)3
Fabrication and application of plane and concave varied line-space gratings for the vacuum spectral domain by interference lithography3
Inactivation of microorganisms by vacuum ultraviolet radiation3
Adaptive hybrid harmony search optimization algorithm for point cloud fine registration3
Measuring the radiation coefficient distribution and surface temperature distribution of a tungsten body heated by a powerful laser3
Neural-network-enabled holographic image reconstruction via amplitude and phase extraction3
Production of nanoporous silicate matrices—problems of optical homogeneity3
Assessment of parameters of partially coherent interference fringes using the Wiener adaptive filtering method3
Topological charge parallel measurement method for optical vortices based on computer-generated holography3
Optimization of two-beam laser cleavage of silicate glass3
Investigation of the effect of change in doping parameters on the gain of a thulium doped fiber amplifier3
Effect of adjustment structure design on laser stability2
Single-mode lasing in ring-cavity surface-emitting lasers2
Assessment of image reconstruction quality in multiplexed terahertz ghost imaging2
Research on a defect detection method on carbon composite laminates based on digital shearography2
Wavelet transform of a gray-scale image in a finite GF(2) field2
Statistical channel modeling of intensity fluctuations in a turbulent underwater wireless optical communication system2
Laser-induced damage: 60 years of measurements2
Design of an optical system for a laser beam shaping system based on aspheric polymer lenses2
Influence of photodetector-array patterns on spatial-frequency response2
Proximity-effect-related reduction of the minimum element size in thermochemical laser writing2
Application limitations of a laser guide star in adaptive optoelectronic systems caused by its jitter in the atmosphere2
Fiber Bragg grating security fence with temperature compensation based on a tilted cantilever beam2
Application of high-resolution terahertz gas spectroscopy to the compositional analysis of the thermal decomposition products of paranasal sinus cyst tissue2
Ultra-high-sensitivity gas pressure sensor based on a cascaded Fabry-Perot interferometer and the Vernier effect2
Zernike-polynomial description of the deformation of a known surface profile with a noncircularly symmetric shape2
Characteristics of various sensor devices for a miniature resonant optical gyroscope2
Performance optimization of a super-dense wavelength division multiplexing system employing a Raman + erbium–ytterbium doped fiber hybrid optical amplifier2
Mathematical modeling of the parameters of an electro-optic modulator in the Mach–Zehnder interferometer configuration based on thin lithium niobate films2
Design of an optical illumination system for a tunable source with acousto-optical filtering2
Choosing the optical materials for multichannel catadioptric systems with Mangin mirrors in the video cameras of miniature drones2
Issues of wavefront tilt measurement2
Curvature estimation and architecture of the Parthenon2
Unified optical scheme of an acousto-optical imaging spectrometer for the visible spectrum2
Rapid technique for the determination of the refractive index of experimental glasses for graded-index optics2
Refractive index measurement using a modified Littrow–Abbe method2
Threshold sensitivity of staring thermal imaging devices operating in slant atmospheric paths2
Microstructured single-mode IR fibers based on metal halides with increased mode-field diameter2
Optical and electrophysiological techniques for functional assessment of vision system neuronal networks2
Pulsed lasing in a broad wavelength range in Cr:LiSrAlF6 crystal2
Effect of WS2 nanoparticles on the refractive properties of liquid crystal compositions2
Image reconstruction based on a single-pixel camera and left optimization2
Structure and optical properties of glasses in the As-Se system2
Composition of collimating optical systems using aberration theory2
Fusion splicing of hollow-core to standard single-mode fibers using a gradient-index bridge fiber2
Calibration and field test of mobile lidar for remote sensing of atmospheric methane2
Digital holographic system for layer-by-layer control of additively manufactured component quality2
Assessment of parameters of interference fringes using a modified algorithm for adaptive Wiener filtering1
Analyzing the optical modes and vortex signals in an optical fiber by means of side illumination1
Chemical–mechanical surface treatment method for high-quality crystalline whispering gallery mode microresonators1
Application of artificial neural networks for the analysis of multispectral images1
Condition diagnosing easel tempera paintings by the high-resolution optical coherence tomography method1
Laser plasma–chemical treatment of optoelectronic materials1
Effect of plasmonic-shell nanoparticles on the nonradiative transfer of electron excitation energy in donor/acceptor pairs1
Theoretical analysis of measurement-device-independent quantum key distribution systems integrated into fiber-optic communication lines using dense wavelength division multiplexing1
Optical properties of a new decorative stone—rayizite1
Compressing 3D holographic information similar to data transmission via a single sideband1
Shape deformation in optical illusions1
Specifics of transmitting telescopes for laser communication systems1
High-quality telecentric projection lens for vein visualization1
Atmospheric measurement simulation of greenhouse gases using a dual-channel infrared lidar system1
Real-time and efficient eyes and mouth state detection: an artificial intelligence application based on embedded systems1
Rain attenuation analysis of a radio over free space optics system considering diverse regions1
Measurement of the refractive index using a goniometric system in an automated mode1
Parametric optimization of silicate-glass-based asymmetric two-beam laser splitting1
Deepfake as the basis for digitally collaging “impossible faces”1
Estimation of tolerance on the image stabilization accuracy of on-board automatic optoelectronic aiming devices1
Modeling and optimization of optical designs with composite holographic elements1
Surface studies of optical glasses by white-light interferometry1
Characterization of lasing regimes of 1.3  µm vertical-cavity surface-emitting lasers based on a short-period InGaAs/InGaAlAs superlattice1
Preliminary estimate of instrumental polarization effects in the LST-3 Large Solar Telescope1
Calculation of the absorption coefficient of air at different heights using the HITRAN and ACE-FTS databases1
Modeling of a focal pi-Shaper using the ray-mapping method1
Influence of laser interference on the detection capabilities of an infrared optoelecronic surveillance system1
Design procedure for a holographic display considering the diffraction efficiency of a volume phase hologram1
Diffraction efficiency and form factor effect of holograms1
Resolution ability of inorganic chalcogenide resists for hologram recording1
Analytical model of a laser rangefinder for measuring distances to objects with poorly predictable motion dynamics1
Training an improved recurrent attention model using an alternative reward function1
Compensators of Petzval field curvature and astigmatism1
Influence of the retarded Kerr effect on an intense femtosecond laser propagating in the atmosphere at different pressures1
Narrow-band interference filters with absorbing films1
Current mode of photomultiplier tube operation for the detection of the kinetics of small optical signals1
Reflectivity of optical glasses in the mid-infrared spectral range in a humid atmosphere1
Evaluation of level of foreign language proficiency based on eye movement data1
Modeling a broad-band single-coordinate autocollimator with an extended mark and a detector in the form of a linear-array camera1
Videoendoscopy of working blades of steam turbines and control of their geometrical parameters1
Laser-based formation of periodic structures as a method for the one-stage production of security holograms1
Technique for developing and testing the control and vibration-proofing systems of on-board optoelectronic devices1
Calculation automation of “cemented doublet with a singlet” and “singlet with a cemented doublet” objectives1
Color night-vision imaging rangefinder1
Multispectral video camera optical system1
Database of video images of natural emotional facial expressions: perception of emotions and automated analysis of facial structure1
High-frequency relief-phase holographic gratings on gelatin-containing photosensitive media1
Two-component compensators of field aberrations of optical systems1
Spatial modulation spectroscopy of semiconductors using dynamic gratings1
Synthesis and optical properties of heterogeneous film structure based on InP/InAsP/InP nanowires1
Evaluating and testing neural-network algorithm capabilities for automating image data analysis for remote sensing of the Earth1
Chromatic component in the modulation transfer function of fully depleted charge-coupled devices1
Absorption characteristics of one-dimensional graphene photonic crystals1
Investigation of the damage to hybrid infrared photodetectors upon multiple cycles of cooling to liquid-nitrogen temperatures using an interference technique1
Simulation of an acousto-optic deflector of terahertz radiation based on a sectioned ultrasound transducer1
Influence of laser pulse duration on fused silica treatment using laser-induced microplasma1
Spectral properties and structure of transparent glass-ceramics based on Fe:MgAl2O4 and Fe:ZnAl2O4 crystals1
Impact of the polarization control system on continuous-variable quantum key distribution system parameters1
Neural-network-based methods in digital and computer-generated holography: a review1
Comparative analysis estimates for two-relief microstructure diffraction efficiency in the visible and dual-infrared ranges in the framework of scalar and rigorous diffraction theories1
Calculation of the splice loss of two fibers, one of which is elliptically deformed along its entire length1
Detection of variable-intensity optical emission using an avalanche photodiode in photon-counting mode1
Image classification using local binary patterns1
Synthesis of narrow-band interference filters with absorbing metal films1
Study of the ability of neural networks to extract and use semantic information when they are trained to reconstruct noisy images1
Creation of a SMART Layer prototype with fiber-optic sensors for monitoring the stress–strain state of structures fabricated from polymeric composite materials and an estimation of its technical chara1
Collimation of an anastigmat objective with three off-axis aspherical mirrors1
Heterodyne straightness interferometer with reduced periodic nonlinearities1
Calculation of blood flow parameters in zebrafish larvae using the phase correlation method1
Modern technologies for the laser cutting of micro- and optoelectronics materials1
Spatial and spectral correction of an acousto-optical imaging spectrometer1
Effective collinear interaction of radiation with a traveling refractive index grating in electro-optical waveguides in lithium niobate1
Random number generator based on semiconductor nanoheterostructures with quantum dots and optical feedback1
3D reconstruction accuracy improvement of a stereo vision system by changing the convergence angle of the cameras1
Formation of tunable asymmetric three-frequency radiation for a radiophotonic vector network analyzer1
Design of optical Fabry–Perot filters for spectral combination of laser beams1
Assessment of fatigue damage of fluoroorganic aircraft glass using digital holography methods1
Synthesis of isognostic text images for visual performance evaluation1
Identification of the Hermite-Gaussian and Bessel modes of a terahertz beam with diffractive optical elements1
Inertia of the oscillatory mechanisms of giant nonlinearities of optical materials in the terahertz spectral range0
Scintillation optical-electronic converter of gamma radiation based on a silicon photomultiplier0
Hybrid laser subtractive technology for fabricating optofluidic elements in a nanoporous silicate matrix0
Relation of local window size in a model of modules with estimation of the size of visual images and their segmentation0
Control of the parameters of double acousto-optic spectral filtering in digital holography0
Development of a direct phase demodulation method for a Fabry-Pérot interferometer for temperature measurements using frequency scanning0
Development and investigation of a method for measuring the speed and weight of moving objects using fiber Bragg gratings0
Two-beam interferometry with a definitive phase-shift sign0
Fluorometric setup and method for studying the functional activity of corneal endotheliocytes0
Dynamic range of a coherent optical spectrum analyzer with a liquid-crystal matrix signal-input device0
Parametric study of the transient period characteristics of distributed feedback laser diodes0
Environmentally stabilized thermal-imaging optical systems0
Compact powerful subnanosecond microchip laser based on Nd:YAG/Cr:YAG crystal operating without a thermal stabilization system0
Simple optical criterion of the ripeness level of strawberries0
Neural network training for thermal image classification based on visible spectrum images0
Enhancing the accuracy of length measurements using laser phase rangefinders0
Measurement of contamination concentration using an adjustable image contrast method0
Evaluation of the thermal contrast of low-temperature ground-based objects0
Morphology of monocrystalline silicon irradiated by the combination of millisecond-nanosecond lasers with different delays0
Light propagation in a meniscus made of uniaxial crystal0
Lead-free metal–halide perovskite nanocrystals: synthesis and optical properties [Review]0
Holographic sight with a one-dimensional telescopic optical system0
Inna Mikhaĭlovna Belousova0
Matrix measurement technology: accuracy of measuring element coordinates and photomask control0
Effect of the electrical formation of electrochromic devices based on tungsten oxide0
Binocular Galilean loupes0
Modeling the parameters of a two-coordinate autocollimator with a multi-element mark and a matrix photodetector0
Mechanisms of perception constancy and recalibration of sensory systems0
Low-temperature test objects for alignment of thermal imaging systems0
Multiplication of a Gaussian beam by a multisector binary phase plate into scalar vortex beams for laser microprocessing0
Method for detection of special inserts in video data streams for informational video clips0
Recording and reconstruction distortion of an off-axis hologram focusing mirror in augmented reality displays0
Investigation of YAG/YSZ multilayer ceramics doped with rare earth ions0
Detection of genetically modified substances based on the terahertz spectrum and a multi-weight vector neural network0
In memory of John Sheridan (1964–2022)0
Application of optimization methods to minimize noise in quantum key distribution systems integrated into fiber-optic communication lines using dense wavelength division multiplexing0
Laser-induced improvement of the photoelectric characteristics of ZnO:Ag thin films0
Research on methods of regression analysis and nonlinear programming for calibrating a goniometer0
Investigation of the structure of plastic products made by 3D printing in sub-terahertz radiation0
Optical properties and disorder of HgCdTe films grown by molecular beam epitaxy0
Design of high sensitivity on-chip temperature waveguide sensor based on sensitive cladding0
Measurement setup for quality control of a Fresnel zone plate with pinholes0
Cascade excitation of luminescence and second harmonic generation in DAST crystalline powder0
Acousto-optically controlled optical tweezers0
Holographic calibration setup based on a set of reference kits comprising axial computer-generated holograms and base test plates0
Passive mechanical athermalization of thermal imaging zoom lenses coupled to an uncooled infrared matrix detector0
Multi-aperture digital telescopic system with super-resolution0
Effectiveness of the application of a monostatic formation scheme of a laser guide star0
Increasing the measurement accuracy for wave aberrations of an optical system using the intensity distribution of a focused light beam0
Acousto-optic spatial frequency filter operating in the intermediate region of acousto-optic interaction0
Precision replication of all types of optical surfaces—scientific and technological basis for the radical transformation of modern optical production0
Sensitized fluorescence and superluminescence of a dye in a functional chitosan–gelatin matrix0
Localized surface plasmon polariton interference and relief nanograting formation0
Laser-excited Xe plasma as a radiation source for lithography at wavelengths near 11  nm0
Hologram aberrations resulting from the violation of Bragg’s law and variations in the depth and shape of the profile of their surface gratings0
ORDSLAM dataset for comparison of outdoor RGB-D SLAM algorithms0
Influence of laser-deposited carbon-containing nanoparticles on the orienting properties of indium-tin-oxide-based conducting layers for liquid crystal devices0
Wide-angle concentric mirror lens objective0
Influence of the retarded Kerr effect on an intense femtosecond laser propagating in the atmosphere at different pressures: erratum0
Laser removal of foxing from the pages of books and paper documents0
Holographic technologies today and tomorrow0
High-Q optical design for a laser-diode-based packaged ring laser gyroscope0
Method for sharpening combined stereo images in the presence of optical distortions0
Formation of rod bipolar cell signals under low light conditions0
Surface-enhanced optical absorption and induced heating in tapered silicon nanoprobes0
Method for finding the optical constants of films from their reflection and transmission spectra0
Small-sized thermal imaging camera based on micro-scanning0
Holographic technologies: traditions and modernity0
Position coding as a means of increasing the range of optical communications links0
Quantum properties of a triple-coupled optical cavity with injection of a squeezed vacuum field0
Avalanche photodiodes based on InAlAs/InGaAs heterostructures with sulfide–polyamide passivation of mesa structures0
Matrix technology of linear–angular measurements0
Editor’s foreword for this special issue0
Information systems with aperture compression0
Real-time monitoring for the composite forming process based on superstructure fiber grating sensing and linear demodulation0
Highly sensitive laser probing and structural diagnostics of ordered substances, materials, and micro- and nano-systems [Review]0
Suppression of residual amplitude modulation in diffused-channel Ti:LiNbO3 optical waveguides by changing their geometry0
Optical system of the high-resolution video channel of a binocular colposcope0
Optical geometric effect of the intersection of matched conicoids as illustrated by line beam scanning0
Photoresistors from heteroepitaxial structures n-CdxHg1-xTe with exclusion of charge carriers within the 3–5  µm spectral range0
New capabilities for laser holographic testing during assembly and collimation of large segmented telescope mirrors0
Method for recording holograms that form a speckle-free image of the aiming mark in holographic collimator sights and other similar augmented-reality devices0
Receiving system of a pulsed laser rangefinder0
Semi-natural simulation of the angular matching of the axes of the working and marker laser beams in a high-precision laser ranging system0
Thermal optics of a collimator radiatively cooled under vacuum0
Structure and optical properties of Er-doped transparent glass–ceramics based on ZnO nanocrystals with anomalous light scattering0
Stabilization of a system that enhances the collinear interaction nonlinearity of light with a traveling refractive index grating0
Using molecular marking in security holograms0
Analysis of surfaces of plates made of optical glass–ceramics using phase-shifting interferometry in the ultraviolet spectral range0
Investigation of liquid droplet surface profile features using the laser caustic method0
Research on the terahertz temperature correlation of L-asparagine and L-tyrosine0
Production of dichromatic light with a rotating polarization vector using a single Bragg cell0
Mathematical model for estimating the characteristics of a layered solid-state dye laser with optical pumping of the active environment0
Using biometry results to optically calculate the paraxial characteristics of the eyes of individuals with emmetropia0
Phase retrieval algorithm for wavefront reconstruction using four scattering spots0
Formation and properties of volume and relief holographic gratings in photopolymer materials0
Improving the efficiency of solar cells based on CsSn0.5Ge0.5I3 perovskite by using ZnO nanorods0
0.13782906532288