Shock and Vibration

Papers
(The TQCC of Shock and Vibration is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)
ArticleCitations
A New Transfer Learning Ensemble Model with New Training Methods for Gear Wear Particle Recognition23
An Experimental Investigation into the Difference in the External Noise Behavior of a High-Speed Train between Viaduct and Embankment Sections15
Statistically Optimized Near-Field Acoustic Holography Using Prolate Spheroidal Wave Functions13
On-Line Monitoring Shaft Misalignment of Feed Drive Systems Based on Time-Domain Shaft Rotating Holospectrum12
On the Reduction of Radiation Damping of Dynamic Foundation on Gibson Elastic Halfspace12
Research on Vibration Reduction Performance of Series Bistable Nonlinear Energy Sink11
Research on Vibration Fatigue Damage Locations of Offshore Oil and Gas Pipelines Based on the GA-Improved BP Neural Network10
Condition-Based Monitoring on High-Precision Gearbox for Robotic Applications10
Initial-Sensitive Dynamical Behaviors of a Class of Geometrically Nonlinear Oscillators10
Remaining Useful Life Prediction of Milling Tool Based on Pyramid CNN9
Study on Numerical Simulation of Surrounding Rock Structure Safety of Urban Underwater Shield Tunnel: A Case in Chongqing9
Study of Structural and Compression Properties of Soft Soils in Kunming at Different Moisture Contents9
Circumferential Semianalytical Finite Element Method for the Analysis of Circumferential Guided Waves in an Anisotropic Hollow Cylinder9
Active Vibration Control for the Mitigation of Wheel Squeal Noise Based on a Fuzzy Self-Tuning PID Controller9
A Simplified Method for Predicting Tunneling-Induced Ground Movement considering Nonuniform Deformation Boundary9
Research on Response Kurtosis Estimation in Linear Structures Subjected to Nonstationary Random Excitation: An Envelope‐Based Method9
Damage Mechanism of Surrounding Rock under Blasting Excavation of the Tunnel9
Investigation of Small-Scaled Soil Structure Model under Earthquake Loads via Small Shaking Table Tests8
Single Feature Extraction Method of Bearing Fault Signals Based on Slope Entropy8
Variation of Permafrost Upper Limit in Permafrost Subgrade Covered by Snow on Steep Slope of Alpine Mountains8
New Insights into the Estimation of Impact Load of Granular Flow against a Rigid Wall8
Retracted: Effect of Rotating Magnetic Field on Hydrogen Production from Electrolytic Water8
Dynamic Characteristics of the Helical Planetary Transmission System considering the Installation Error of Shaft7
Stability Analysis of Roof and Rib and Source Control Countermeasures of Ultrahigh Roadway in Deep Coal Mine7
Fault Identification of Low-Speed Hub Bearing of Crane Based on MBMD and BP Neural Network7
The Research on Risk Distribution and Evolution of Deep Foundation Pit Construction Adjacent to Existing Tunnels Based on Complex Network7
Optimization Design and Analysis for the Mechanical Test Platform of Scientific Probe Module of the Cool Planet Imaging Coronagraph7
A Simple Conceptual Model for Estimating the First Bending Natural Frequency of Bridge Superstructures7
Effect of Rotating Magnetic Field on Hydrogen Production from Electrolytic Water7
Analysis on the Difference of Energy Evolution in the Process of Energy Storage Failure of Strong Coal Rush Rock Samples under Different Adaptive Modification Regulation Measures7
Mechanism and Application of Blasting Technology Using Phase-Difference Vibration Mitigation on Adjacent Railway Tunnel7
Research on the Evolutionary Response of Dynamic Penetration Behavior Exhibited by Jets6
An Integrated Bearing Fault Diagnosis Method Based on Multibranch SKNet and Enhanced Inception‐ResNet‐v26
Retracted: Study on the Failure Mechanism of Strain Rockburst6
Performance Assessment of Hybrid Fibre-Reinforced Concrete (FRC) under Low-Speed Impact: Experimental Analysis and Optimized Mixture6
Fault Characteristics Analysis of High-Speed Train Transmission Systems6
Evaluation Method of Roof Damage Degree and a Case Study in Maoping Lead-Zinc Mine, Yunnan6
Adaptive Narrowband Compensation Algorithm for Active Control of the Pressure Pulsation Line Spectrum in A Liquid Pipeline System6
Study on Restraining Cavitation of Axial Piston Pump Based on Structure of Cylinder Block and Valve Plate Triangular Throttling Groove6
Retracted: Research on Optimizing Selection and Optimizing Matching Technologies of Aeroengine Fan Rotor Blades6
Dynamic Analysis of the Guiding Shoe considering Contact Gap and Pose Disturbance6
Dynamic Reliability Evaluation on Foundation of Stone Cutting Machine under Ambient Excitation5
Experimental Study on Frequency Modulation Damping Effect of Digital Detonator in Road Clearance Blasting5
Seismic Response and Damage Analysis of Large Inverted Siphon Structure5
Research on the Influence of Characteristics of the Annular Connecting Pipe on the Transmission Loss of the Expanded Exhaust Muffler5
A Discrimination Method and Experimental Study for Predicting the Failure Strength of Saturated Sandstone Based on RVSD5
Detection and Evaluation for Corrosion Fatigue Damage on Q235A Steel Using Nonlinear Rayleigh Surface Wave5
Impact of Tuned Mass Dampers and Electromagnetic Tuned Mass Dampers on Geometrically Nonlinear Vibrations Reduction of Planar Cable Robots5
Study on the Support Effect of Energy-Absorbing Support Structure in the Coal Mine Roadway and the Synergic Effect with Wall Rock5
Study on Dynamic Evolution of Overburden Rock Movement and Mining-Induced Stress of Ultra-high Working Face5
Cutting‐Edge Review of Big Data Preprocessing in TBM Tunnel Construction5
The Research on the Seismic Performance of Immersion Joints Under Cyclic Loading5
Risk Assessment of Constructing Deep Foundation Pits for Metro Stations Based on Fuzzy Evidence Reasoning and Two-tuple Linguistic Analytic Network Process5
A Point Cloud-Based Feature Recognition and Path Planning Method5
Bed Separation Characteristics of an LTCC Panel and Subsidence Controlling Grouting: Case Study of Longquan Coal Mine, China5
The Modeling Method for Vibration Characteristics Analysis of Composite‐Laminated Rotationally Stiffened Plate5
Machines’ Intelligent Fault Diagnosis Based on Hierarchical Refined Composite Generalized Multiscale Fluctuation Dispersion Entropy5
Corrigendum to “Multiparameter Control Strategy and Method for Cutting Arm of Roadheader”5
Transient Signal Acquisition Method Based on Compressed Sensing Downsampling Measurements5
Modeling Method and Vibration Analysis of Dovetail Jointed Blade Set With Underplatform Damper by Considering Thermal Effect5
Research on Temporal and Spatial Distribution Characteristics of Microseismic Events of Slip-Type Rockburst5
Experimental Study of Penetration Capability of an Annular-Shaped Charge under Multipoint Synchronous Initiation4
Research Anti‐Impact Mechanism of Roof Presplitting Blasting in Deep Composite Thick and Hard Key Strata4
Study on the Bearing Plate of Steel Clarification Tank under Earthquake4
Application of Homogenized Load-Bearing Ring Hypothesis in Roadway Supporting4
On Damage Identification in Planar Frames of Arbitrary Size4
Suppressing Milling Chatter of Thin-Walled Parts by Eddy Current Dampers4
An Enhanced Gated Recurrent Unit-Based Adaptive Fault Diagnosis of Rotating Machinery4
Dynamic Response and Parameter Analysis of Electromagnetic Railguns under Time Varying Moving Loads4
Bearing Early Fault Diagnosis Based on an Improved Multiscale Permutation Entropy and SVM4
Efficacy of the Combined Use of Bed Sill and Sacrificial Piles to Control Local Scour around Circular Bridge Piers4
Analysis of the Influence of Boundary Permeability Characteristics Under Fluid–Solid Coupling on Surface Subsidence in Deep Near‐Horizontal Coal Seam Mining4
Waveform Characteristics of Tunnel Blast Waves and a Wave-Blocking Method4
Geometrical-Feature-Preserving Adjoint Tomography of Near-Surface Structure with Seismic Early Arrival4
Dynamic Characteristics of a Variable Damping Isolator with Translating Cam4
Feature Extraction of Weak-Bearing Faults Based on Laplace Wavelet and Orthogonal Matching Pursuit4
Influence of Masonry Infill on Seismic Design Factors of Reinforced-Concrete Buildings4
Multiple Time-Scales Analysis to Predict the Quasiperiodic Oscillatory Response of a Thin-Walled Beam Subjected to 4
Improving Critical Frequency of the Electrothermal V-Shaped Actuator Using the Particle Swarm Optimization Algorithm4
Seismic Performance Assessment of Ordinary Moment Resisting Frame Equipped with Viscous Dampers under Pulse-Like Earthquakes4
An Arc-Consistent Viscous-Spring Artificial Boundary for Numerical Analysis of Seismic Response of Underground Structures4
Cause Analysis of Coal Mine Gas Explosion Based on Bayesian Network4
Inversion for Constitutive Model Parameters of Bird in Case of Bird Striking4
Deformation and Fracturing Behaviors of Sandstone Disc Containing a Circular Inclusion under Diametrical Compression: Insights from Integrated SG and DIC Experiments4
Study on Mechanical Properties and Energy Consumption of Fissured Sandstone with Different Dip Angles under Impact Load4
Static Characteristics of Finger Seal considering Contact between Fingers and Rotor4
Experimental Study on Dynamic Mechanical Characteristics and Energy Evolution of Sandstone under Cyclic Impact Loading4
Research on the Movement Law of Roof Structure in Large-Inclined Coal Seam Working Face: A Case Study in Liu.Pan.Shui. Mining Area3
Trigonometric Higher‐Order Shear Deformation Theory on Exact Solution for Lateral and Longitudinal Dynamic Response of Magneto‐Electric Carbon Nanotube‐Reinforced Composite Beams Under Two Moving Load3
Intelligent Drilling Depth Monitoring System for Geotechnical Site Investigation3
Research on Material Selection Method and Brittle Fracture Mechanism of High-Pressure Pipeline3
Singularity-Free Adaptive Controller for Uncertain Hysteresis Suspension Using Magnetorheological Elastomer-Based Absorber3
Modeling and Simulation of Parametric Nonlinear Focused Ultrasound in Three-Dimensional Bubbly Liquids with Axial Symmetry by a Finite-Element Model3
An Overview of Vibration Analysis Techniques for the Fault Diagnostics of Rolling Bearings in Machinery3
Modeling and Investigation of the Velocity-Dependent Cutting Process with PDC Cutters Using the Discrete Element Method3
Research on Vehicle Vibration Fatigue Damage Potential under Non‐Gaussian Road Profile Excitation3
Dynamic Response of a Vehicle-Bridge Expansion Joint Coupled System3
Estimating Site Characteristic Parameters of the Gobi Desert Region Using Seismic Noise3
Graph Feature Fusion‐Driven Fault Diagnosis of Complex Process Industrial System Based on Multivariate Heterogeneous Data3
Similar Simulation Test on Deformation Characteristics of Overlying Rock Developed by Instability of Strip Coal Pillar3
Vibration Characteristic Analysis of a Coupling System for Compound Biaxial and Inter-Shaft Bearings3
Identification of Vibration Signal for Residual Pressure Utilization Hydraulic Unit Using MRFO-BP Neural Network3
Research on Lateral Vibration and Load Sensitivity Reductions for Large‐Scale Complex Nonconservative Systems Using Rigid‐Flex Coupling Simulation Technique3
Stiffness Modeling of Tooth Interior Fatigue and Tooth Flank Fracture and Their Fault Characteristics in Electromechanical Coupling Systems3
Dynamic Windage Yaw Angle and Dynamic Wind Load Factor of a Suspension Insulator String3
Constitutive Modelling of the Cyclic Response of Unsaturated Soils: A Discussion of the State‐of‐Art3
Tension Characteristics Analysis of Scraper Chain of Heavy‐Duty Scraper Conveyor with Time‐Varying Loads3
Improved Measurement Accuracy Based on Moving Sine-Wave Fitting for Ultrasonic Ranging3
Smart Elastic Material with a Moving Local Stiffness Zone for Reducing the Effects of Impact Loading3
Research on Meso‐Damage Experiment and Simulation in the Anchorage Bonding Interface Between Rock Bolt and Rock Mass3
The Relationship Marketing Performance Evaluating in Financial Services Sector of Project Management3
Bearing Remaining Useful Life Prediction Based on AdCNN and CWGAN under Few Samples3
Application of Multichannel Active Vibration Control in a Multistage Gear Transmission System3
Ground Motion and Site Characteristics Evaluation Using Hilbert-Huang Transform Method Based on Light-Moderate Earthquakes3
Comparative Studies of Dynamic Mechanical Properties of Desert Sand Concrete and Ordinary Concrete3
Rolling Bearing Fault Diagnosis Method Based on MCMF and SAIMFE3
Forced Response Vibration Analysis of the Turbine Blade with Coupling between the Normal and Tangential Direction3
Study on Coal Gangue Identification Based on Vibration and Its Adaptability to Coal-Caving Process Parameters3
A Fully Coupled Time-Domain BEM-FEM Method for the Prediction of Symmetric Hydroelastic Responses of Ships with Forward Speed3
Scattering Analysis and Detection of Layered Plate Debonding Using Guided SH Waves with Boundary Element Method3
Research on the Load Characteristics of Squeezed Film Gas Bearings3
Design and Optimization of a New Vibration Damping System for the Driving Characteristics of the Selected Case of Replacing Pneumatic Wheels with Nonpneumatic Wheels3
Study on Dynamics of Hydraulic Control System for Automatic Loading and Unloading of Drill Pipe of Geological Drilling Rig3
A Decision Support System for Optimal Building Cold Source Selection3
Numerical Simulation on Dynamic Response of Existing Tunnel to Moving-Axle Loads under the Influence of Oblique Shield Crossing the Intersection Area3
Torsional Vibration Characteristics Analysis and Parameter Optimization of Parallel Hybrid Electric Vehicle Powertrain3
Experimental Study on Hydrodynamic Performance of the Integrated Floating Breakwater-Wind Turbine Device3
Research on Loss Characteristics Based on the Vibration Law of Granular Assembly3
A Modified Fifth-Order WENO-HLLC Riemann Solver for Transonic Viscous Flows around Helicopter Rotor in Hover3
Damage Evolution of Granite under Ultrasonic Vibration with Different Amplitudes3
Study on the Failure Mechanism of Strain Rockburst3
Stability Parameter Range of a Tethered Unmanned Aerial Vehicle3
Genesis Analysis and Stability Evaluation of Karst Area in the Mudengdong Village Based on the Geological Investigation and Numerical Simulation Methods3
Investigation of Frequency Split Phenomenon of Rolling Tire Vibration Property Using a New Naming Convention3
Advanced Diagnostic Techniques for Fault Detection and Maintenance in Diesel Generators: Integration of AI and Multimodal Sensing3
Research for Pedestrian Steel Bridge Design of Neural Network in Structural Model Updating3
Research on Vibration Characteristic Analysis of Magnetic Suspended Dual-Rotor System with Fixed-Point Rubbing3
Study on Dynamic Behavior of a Titanium Alloy Drill Pipe in Complex Wells3
Research on Underwater Sound Source Localization Based on NLM-EEMD and FCM-Generalized Quadratic Correlation3
Experimental Study on Seismic Fatigue Capacity of High- and Mild-Strength Structural Steels with and without Corrosion3
Research and Application of Rock Burst Hazard Assessment of the Working Face Based on the CF-TOPSIS Method3
Numerical Simulation and Experimental Research of Cavitation Jets in Dual-Chamber Self-Excited Oscillating Pulsed Nozzles3
Influence of Fir-Tree Tenon Blade Parameters on Blade Dynamic Characteristics3
Theory of the Cutter‐Oscillators Design3
On the Seismic Performance of the Single-Layer Reticulated Shell with a Center-Hung Scoreboard under Multiple Seismic Excitations3
Study on the Safety Evaluation Method of Life-Saving Passage in Building Ruins under the Action of Aftershock3
Multiscale Time-Frequency Sparse Transformer Based on Partly Interpretable Method for Bearing Fault Diagnosis3
Research on Health Condition Monitoring for Glass Panel of Hidden Frame Glass Curtain Wall Under Wind Load Using Fuzzy Comprehensive Evaluation3
Deformation and Failure Evolution Law and Support Optimization of Gob‐Side Entry in Weakly Cemented Soft Rock under the Influence of Fault3
Study on the Seismic Response and Aseismic Measure of Fault-Crossing Tunnels under Combined Action of Fault Dislocation and Seismic Motions3
Numerical Study of Leakage and Rotordynamic Performance of Staggered Labyrinth Seals Working with Supercritical Carbon Dioxide3
Experimental Studies and Numerical Simulation Stress Analysis of Mortar Base Plate Under Impact Loading3
Evaluation of the Crosswind Effect on the Horizontal Curve Safety on Rural Highways Using Vehicle Dynamic Simulation3
Hydraulic System Fault Diagnosis Based on Dual‐Channel Convolutional Neural Network and Improved D‐S Evidence Theory2
Seismic Fragility Analysis of Arch Dam Based on IDA and ETA Methods2
Research and Application of Coal Seam Permeability Improvement Technology by Sectional Directional Hydraulic Fracturing2
Investigating Fractional Damping Effect on Euler–Bernoulli Beam Subjected to a Moving Load2
Characteristics of Generating Carbon Oxides at Low-temperature Oxidation Stages of Low-Rank Coal2
Research on Fault Diagnosis Method Based on Improved CNN2
Vulnerability Analysis of Catenary-Bridge-Track System2
Seismic Hazard Evaluation of the North and Northwest Iranian Plate Considering the Bayesian Perspective2
Study of the Mechanical Behavior of Retaining Structures and Adjacent Buildings during the Excavation of Deep and Long Pits2
Real-Time Recognition of Loading Cycles’ Process Based on Electric Mining Shovel Monitoring2
Study on Influence of Adhesion Properties in Screen Printing Electronic Ink Transfer2
Research on the Conversion Relationship between Dynamic Point Load Strength and Dynamic Compressive Strength Based on Energy System2
Measurement Technique and Result Analysis of Helicopter Rotor Blade Structural Vibration Load2
Simulation of Vortex‐Induced Vibration for a Cylinder with Different Rounded Corners under Re = 1502
Quasi‐Periodic Motion of a Strip During Rolling With 1:6 Internal Resonance2
Numerical Simulation of the Collision Breakage Process between the Agglomerate and Hammer in a Hammer Crusher Using DEM2
Mechanism and Comprehensive Prevention and Control of Damage Resulting From Dynamic Pressure on a Roadway of a Near‐Vertical and Extra‐Thick Coal Seam: Case Analysis of Wudong Coal Mine2
A Magnet-Coil-Type Bistable Vibration Energy Harvester for Random Wave Environment2
Application of Viscoelastic Tuned Mass Dampers in Vibration Mitigation of Steel Joist Jack Arch Floor Structures2
Efficiency Analysis of Fragmentation Warheads Through Advanced Modeling Techniques: Experimental and Numerical Study2
Multi-State Reliability Analysis Based on General Wiener Degradation Process and Random Shock2
Influence of Soil-Structure Interaction on the Seismic Response of a Continuous Bridge with Friction Pendulum System2
An Analytical, Numerical, and Experimental Investigation on Transverse Vibrations of a Finite Locally Resonant Beam2
Structure of Overlying Rock Strata and Advanced Abutment Stress Evolution in Deep Filling Mining2
Three‐Dimensional Rupture Patterns of the Rock Mass With Closed Beddings Under the Blast Loading2
Numerical Model Updating and Validation of a Truss Railway Bridge considering Train‐Track‐Bridge Interaction Dynamics2
Influence of Roof Stress State on Drill Rod Vibration When Drilling Bolt Holes2
Position Optimization of Passive Patch Based on Mode Contribution Factor for Vibration Attenuation of Asymmetric 1D Structure2
A New Dynamic Balance Framework Based on Blind Source Separation under Multiple Fault Conditions2
An Analytical Seismic Response for Rigid Underground Rectangular Tunnel Subjected to Incident P Waves2
Enhancing Foundation Strength and Minimizing Uneven Settlement Through Split Grouting2
Metalized Plastic Waste Fiber Effects on Green Concrete Beams Mechanical Performance2
Research on the Characteristics of Gas Cushioning Hydraulic Leg Under Impact Condition2
Study on Response and Influencing Factors of Shield Single/Twin Tunnel under Seismic Loading using FLAC 3D2
Research on Low-Frequency Noise Control Based on Fractal Coiled Acoustic Metamaterials2
Assessing Seismic Performance of Gantry Crane Subjected to Near-Field Ground Motions Using Incremental Dynamic and Endurance Time Analysis Methods2
Vibration Transmission Characteristics and Measuring Points Analysis of Bearing Housing System2
Numerical Simulation Study on the Strengthening Mechanism of Rock Materials under Impact Loads2
Analytical Threshold for Chaos of Piecewise Duffing Oscillator with Time-Delayed Displacement Feedback2
Robust Preview Control for Half‐Vehicle Active Suspension System of Hub‐Driven Electric Vehicles with Coupling Effects2
A Simplified Methodology of European Steel Characterization on Theoretic Structural Application with Buckling Restrained Braces2
Whole Body Vibration Exposure among the Tractor Operator during Soil Tillage Operation: An Evaluation using ISO 2631-5 Standard2
Research on the Weight Removing Model and Control Method for the Unbalance Vector of Thin Disc Workpiece2
Effect of Ultrasonic Vibration on Forming Force in the Single-Point Incremental Forming Process2
Roadway Protection by Roof-Cutting in the Support Removing Channel of the Long-Wall Mining Face2
Monitoring Soil-Pile Stripping Damage at Different Temperatures via Piezoelectric Ceramic Sensors2
Engine Start‐Up Torque Coordinated Control for Multimode Hybrid Electric Vehicle Equipped With a Two‐Speed Dedicated Hybrid Transmission2
Dynamic Response of Curved Tunnels under Vertical Incidence of Transversal SV Waves2
Damage Detection of Laminated Rubber Bearings Based on the Antiresonance Frequencies of Periodic Structure and Its Sensitivity Analysis2
Experimental and Numerical Investigation of Acoustic Performance for Full-Sized SPS2
Antipenetration Performance of Multilayer Protective Structure by the Coupled SPH-FEM Numerical Method2
Effect of Bed Roughness and Negative Step on Characteristics of Hydraulic Jump in Rectangular Stilling Basin2
Experimental Investigation of Blast‐Induced Crack Propagation Based on Digital Image Correlation Analysis2
Study on Muck Pile Shape of Open-Pit Bench Blasting Based on PFC2
Prediction of Remaining Useful Life of Packing Sets in a Plunger-Type High-Pressure Compressor Based on the PCA/SVD Analysis and NN Model2
Interaction between Viscoelastic Composite Beams and Vehicles by a Decoupled Method and Its Application in Engineering2
Prediction of Vibration Waveform and Division of Influenced Partitions under the Action of Blasting2
Strength Analysis of Carbon Fiber Composite Flywheel Energy Storage Rotor Based on Progressive Damage Failure2
Study on the Load Transfer Behaviour and Bond-Slip Model of Fully Grouted Rockbolt2
The Effect of Cubic Damping on Geometric Nonlinear Flutter in Long‐Span Suspension Bridges2
Open-Pit Mine Geological Model Construction and Composite Rock Blasting Optimization Research2
Prediction Model of Impact Vibration Strength Under Explosion2
A Study of Engine Intake Noise Control Based on the Improved Filtered-x Least Mean Square Algorithm2
Investigations of Dynamic Mechanical Performance of Rubber Concrete under Freeze-Thaw Cycle Damage2
Multiworking Conditions Anomaly Detection of Mechanical System Based on Conditional Variational Auto-Encoder2
Study on the Vertical Stiffness of Bridge Expansion Joints Based on the Vehicle-Track-Bridge Coupled Model2
Probabilistic Evaluation of Seismic Performance of Steel Buildings with Torsional Irregularities in Plan and Soft Story under Mainshock-Aftershock Sequence2
Dynamic Topology Optimization of Constrained Damping Plates considering Frequency and Temperature Characteristics Based on an Efficient Strategy2
Improved Compressed Sensing Reconfiguration Algorithm with Shockwave Dynamic Compensation Features2
Self-Excited Vibration Analysis of Gear-Bearing System with Multipoint Mesh and Variable Bearing Dynamic Coefficients2
Estimation of Directional Wave Spectrum Using Measurement Array Pressure Data on Bottom-Mounted Offshore Structure in Incident and Diffracted Wave Field2
Researching the Influence of Preload on Vibration Characteristics in the Ballistic Recorder Vibration Damping System2
Assembly Quality Inspection of Combine Harvester Based on Whale Algorithm Optimization LSSVM2
Propagation Characteristics of Explosion Wave and Explosion Gas in Blast-Hole2
Improved Transfer Path Effect Model Considering Frequency Attenuation for Planetary Gear Train With Sun Gear Fault2
Cyclic Behavior of Bolted Stiffened End-Plate Moment Connections for Different Bolt Pretensioning Levels: An Experimental Study2
A Novel Sparse Enhancement Neural Network for Rolling Bearing Fault Diagnosis2
Retracted: Study on Dynamic Evolution of Overburden Rock Movement and Mining‐Induced Stress of Ultra‐high Working Face2
Investigation on Free Vibration of Rotating Cylindrical Shells with Variable Thickness2
An Investigation on Attention Mechanism–Based Long Short‐Term Memory for Gearbox Fault Diagnosis2
Influencing Mechanism of Detonator Location on Blasting Vibration with Electronic Initiation Technology2
Theoretical and Experimental Study of the Torque Impact and Shaft Response during the Rapid Engaging Process of a Gas Turbine2
Research on Predicting Mine Earthquakes Based on Deep Learning Time‐Series Methods2
Research on Chaotic Threshold of Giant Magnetostrictive Actuator With Fractional‐Order Time‐Delay Feedback2
Prediction of Rock Damage Depth Using Blasting Vibration Monitoring2
Probability Distribution and Determination of Blast Loading during Structural Blast Resistant Study2
Spectral Velocity of the Ground Surface in Alluvial Soils due to the Presence of Circular Urban Subway Tunnels2
Accuracy‐Improved Fault Diagnosis Method for Rolling Bearing Based on Enhanced ESGMD‐CC and BA‐ELM Model2
Multilevel Feature Extraction Method for Adaptive Fault Diagnosis of Railway Axle Box Bearing2
Experimental and Numerical Analysis of Omnidirectional Steel Moment Connection With Through‐Plate Panel Zone Under Cyclic Loading2
Improved Empirical Modal Decomposition Coupled with Interwoven Fourier Decomposition for Building Vibration Signal Denoising2
Numerical Investigation on the Flow Field of Muzzle Decompression Device for the Barrel Recoil Gun2
Dynamic Investigation and Resonant Frequency Determination of Shaft Bending Fatigue Testing Machine2
Investigation on Low Frequency Bandgap of Coupled Double Beam with Quasi-Zero Stiffness for Power Transformer Vibration Control2
Response of Composite Beam Structure under Unbalanced Excitation of Rice Threshing System2
A Method for Enhancing the Acoustic Scattering Characteristics of Underwater Acoustic Corner Reflectors in Vacuum Cavities2
Field Measurement and Energy Analysis of Ground-Borne Vibration around High-Speed Railway Viaduct2
0.14290308952332