Physics of Fluids

Papers
(The median citation count of Physics of Fluids is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)
ArticleCitations
Confined steady simple shear flow of polymeric liquids460
Insights into three-dimensional choroidal hemodynamics based on widefield optical coherence tomography angiography images167
Numerical study of CO2 utilization technology in shale gas reservoir: Implications for enhancing gas recovery and optimizing fracture scheme147
Rotational effects on momentum and heat transfer characteristics of disk particles in compressible flows147
An analytical transient solution for focused waves with phase velocity method127
Analysis of the correlation between flow physics and cylinder acoustic using different turbulence models109
Simultaneous optical velocity and density measurements of resonant nonlinear internal waves in pycnocline104
Kinetic theory analysis of microscale lubrication of a gas between eccentric circular cylinders with an arbitrary temperature difference103
The impact and freezing processes of a nanofluid droplet on an ice surface103
Experimental study on the startup of the annular wick type heat pipe using fiber optical temperature measurement technique99
On the influence of spanwise deformation on lift coefficient and trailing vortices properties at low Reynolds number97
Characteristics of oil–water two phase flow in anisotropic porous media with intrinsic fractures considering stress sensitivity96
Effects of submersion depth on the dynamics and deposition of lock-release turbidity currents96
A novel model of unsteady fluctuations of supersonic mainstream influenced by a forward-facing-step-induced shock84
The power of internal wave attractor83
Influence of initial angle on trajectory and kinematics of freely falling chips in fluidic self-assembly81
A method for evaluation of aerodynamic lift and drag based on statistical mechanics81
Publisher's Note: “Analytical model for predicting the length scale of shock/boundary layer interaction with curvature” [Phys. Fluids 34, 111701 (2022)]80
Interaction between the oil droplet in water and wetted wall: Force model and motion law78
Echoes of the hexagon: Remnants of hexagonal packing inside regular polygons77
Rotational speed modulated air–cavitation interactions in centrifugal pumps74
Some new lump molecules and hybrid molecular states of a (3 + 1)-dimensional generalized variable coefficient Kadomtsev–Petviashvili equation74
Improved Lagrangian flow network and its application to pattern evolution and mass transport in three-dimensional cavitating flow around a hydrofoil73
Coupling actions between sway and roll motion responses of the ship with sloshing inside73
Preparation and characterization of in situ cured vegetable-based resin plugging agent for fracture plugging in reservoirs73
Is the circular motion of bubble-driven spherical Janus micromotors deterministic or random?71
Drag reduction in hypersonic flows with viscous compressible fluid–solid coupling: The role of elastic spikes and lateral jets70
A statistical study of the impact of the stream interaction regions on the heliospheric current sheet69
Linear instability of a resting state of the magnetohydrodynamic flows of polymeric fluid in a cylindrical channel (generalized Vinogradov–Pokrovski model)69
A modified experimental approach for generating internal solitary waves using the dual paddle technique67
Analytical mechanisms for heat flux reduction on a V-shaped blunt leading edge67
A catastrophe phenomenon produced by impact of drop trains67
Improved defect-correction algorithms for the Navier–Stokes equations at small viscosity66
Stress redistribution and crack evolution during fault slip: Insights from coupled finite-discrete element method simulations66
Wide flow model for converging gravity currents and the effects of the flow resistance model on the propagation65
A regional spatial nonlocal continuous time random walk model for tracer transport in fluids65
Relationship between wake and cylinder dynamics for a cylinder undergoing modulated vortex-induced vibrations64
Flow mechanism of pneumatic hammer in aerostatic bearings64
Erratum: “Proposition of extension of models relating rheological quantities and microscopic structure through the use of a double fractal structure” [Phys. Fluids 34, 083105 (2022)]62
Impact of ion-specific interactions on laser-induced liquid microjet generation62
Multiphase flow analysis of complex wellbore–fracture–cave connections in condensate gas reservoirs62
The role of boundary conditions in the theory of aerosol particle thermophoresis61
The effect of retraction-rebound dynamics on the contact time of rebounding-coalescing droplets on a superhydrophobic surface with or without a macro-ridge60
Scaled asymptotic solution nets for unlabeled seepage equation solutions with variable well flow60
Detonation flows of explosives containing compressible inert particles59
Theoretical and experimental study of strain localization phenomenon based on phase transition theory58
Projection of climate change impact on tropical cyclone hazard in Western North Pacific basin58
Introducing the Rankine vortex method for drag reduction in wall-bounded turbulent flows at low Reynolds number through streamwise vortex manipulation57
Electrowetting-induced parametric instability of a merged micro-droplet57
Incompressible extended magnetohydrodynamics waves: Implications of electron inertia56
Dynamic coupling of wing mechanics and aerodynamics in Dipteran-inspired flapping wing systems56
Probing the mechanism underlying preshock desensitization of heterogeneous explosives via meso-resolved simulations55
Reference solutions for compressible single-phase flows in heated and cooled ducts55
Slender vortex filaments in the Boussinesq approximation55
Stability of buoyancy–thermocapillary convection in molten silicon liquid bridge between two disks with different radii under gravity55
Entrainment and bulk flow characteristics of heated and unheated transient plumes using direct numerical simulations55
Interaction of inertia and magnetic force in the liquid metal flow past a magnetic obstacle55
Modal analysis of blood flows in saccular aneurysms55
Enhanced and reduced solute transport and flow strength in salt finger convection in porous media55
A multi-limiter method for simulating complex flows on large grids55
Physics-assisted recursive method for sample selection from wall-bounded turbulence data54
Prevention of edge fracture using a nontoxic liquid metal sealant54
Enhancing coal seam permeability using gas–liquid combined fracturing: Field application and effectiveness evaluation in Liu'jia'liang high-gas mine54
Morphology evolution and dynamics of sliding nanodroplets under external forces: A molecular dynamics study54
Thermal convection instability of two miscible viscous fluids in a rotating annular Hele–Shaw cell54
A new similarity law for transonic–supersonic flow54
A novel, rapid, and short-range pressure-gain combustion under pulsed airflow and injection53
Bifurcation analysis of double cavity flows53
Experimental study on wavefront flow characteristics of dam-break wave at initial stage on wet bed53
Dynamic coupling mechanism of shale drilling fluid invasion depth, fracture width, and rock strength53
Motion prediction of planing craft in waves based on two-dimensional plus time method51
Deformation and fragmentation of a water drop in collision with a thin cylinder51
Micromechanical properties and fractal homogenization of coal based on nanoindentation51
Study on the film thickness and surface wave velocity of the thin liquid film formed by a round jet obliquely impinging on a horizontal plate50
A linearly implicit energy-stable scheme for critical dissipative surface quasi-geostrophic flows50
Impact and spread dynamics of a viscoelastic droplet on an inclined hydrophilic surface50
Experimental study of liquid spreading and atomization due to jet impingement in liquid–liquid systems50
Impact of ion mobility on electron density and temperature in hypersonic flows50
Synergistic effect of tip winglets and controllable speed casing on compressor stability49
Characteristics and mechanism of spray deviation of ethanol and its blended fuel in multi-hole spray49
Buoyancy and velocity field synergy principle for enhancing buoyancy-driven ventilation and natural smoke venting49
Secondary flows in the actuator-disk simulation of wind-turbine wakes49
Regulating tribofilm formation by harnessing hydrodynamic lubrication effects in double-sided periodic contact48
Stability of quasi-equilibrium of a binary fluid-inclined layer under the action of high-frequency vibrations48
Advanced property calculation approach considering real gas effects in supercritical carbon dioxide compressors48
Influence of inlet and outlet shift on the performance of a micro pneumatic turbine48
New similarity laws reduced from local Mach factors in longitudinal–transverse force theory48
Boundary layer velocimetry in a detonation-driven hypersonic shock tunnel using NO laser-induced fluorescence48
Dynamics of the restricted vortex problem with a honeycomb configuration47
Flow and thermodynamic behavior of viscoelastic fluids in twisted oval tubes47
A bouncing and rotating drop after oblique impact on Lubricant-Impregnated surfaces47
Effect of CO2 on water condensation and homogeneous nucleation: Insights for supercritical water gasification syngas phase separation47
The contribution of degenerate tori: The study of strong Kolmogorov–Arnold–Moser stability and barrier development47
Theoretical approach for the equilibrium scour depth underneath a partially submerged bridge deck47
Analysis of noise source in a centrifugal pump based on vortex sound theory47
Stability and transition for long-duration hypersonic flat-plate boundary layer considering wall thermal effect46
Integration of vorticity–velocity formulation in a lattice Boltzmann method for porous media46
Pressure-based compressible two-phase model for continuous process of underwater explosion46
Recent advances in analytical techniques for solid sedimentation in drilling fluids: A review46
Effects of coiling index and vessel diameter on umbilical artery flow: A computational fluid dynamics study46
Wind farm repowering to mitigate wake effect based on a novel optimization framework46
Multi-fidelity neural network for instantaneous aerodynamic prediction of three-dimensional flapping wings45
Transition of counter-rotating plasma-induced vortices into a jet45
Droplet encapsulating bubble: Investigation of droplet spreading dynamics and bubble encapsulation time45
On the isotropy of temperature fluctuations in passive scalar turbulence45
Comparative analysis on the normal vector features of the conventional inverted flame and ultra-lean residual flame45
Data-driven large-eddy simulation with stochastic surrogate closure for capturing intermittency in generalized stochastic Burgers turbulence45
Experimental study on energy harvesting maximization from the flow-induced vibration of a highly confined bluff body45
The role of nonlinear viscoelasticity in journal bearing lubrication: Insight from the Phan–Thien–Tanner model44
Stable upstream swimming of a swarm of puller microswimmers44
A material transport model for laminar vortex rings in the propagation phase44
Poiseuille flow with stochastically perturbed boundary44
Directional self-motion of nanodroplets driven by controlled surface wetting gradients44
Bidirectional fluid–solid–heat interaction: Impact of extreme temperatures on aortic stenosis complications44
The along-flow-path dynamic adsorption behavior of polymers on mineral surfaces with different roughness44
A partition-coupled Eulerian–Lagrangian method for large-deformation simulation of compressible fluid43
Evaluation of stochastic particle Bhatnagar–Gross–Krook methods with a focus on velocity distribution function43
Numerical investigation of mixing performance in supersonic cold flow over dual-cavity in scramjet43
Linear stability analysis of a premixed flame in curved micro-combustors43
The fixed points and the manifolds in a second order Stokes wave43
Simulation and mechanism study of cavity collapse of small angle conical projectile entry into water43
Transmission of mobility via cooperative mechanisms in soft active matter43
Vapor bubble growth rate models for three cavitation regimes: Review and model correction42
A Coulomb collision model based on collision cross section and its effects on kinetic characteristics of atmospheric thermal microplasmas42
Similarity laws for single-nozzle retropropulsion flow structures in reusable launch vehicles42
Wave scattering by a slotted arc-shaped breakwater consisting of closely spaced piles with different cross sections42
A novel forecast framework for unsteady flows based on a convolutional neural network42
A pressure-corrected double-Gaussian analytical wake model for wind turbines41
Numerical study on passive flow and noise control of finite wall-mounted cylinder with porous coatings41
Transient vortex dynamics and impulsive loading induced by accelerated cutoff gate motion during pump startup in a prototype tubular pump system41
Effects of vortex generator on the hydrodynamic characteristics of hydrofoil and horizontal axis tidal turbine41
Development and drag-reducing performance of a water-soluble polymer coating41
On axisymmetric gravity currents with internal stratification41
Study on aerodynamic characteristics and stochastic vibration analysis during train passage over bridge under crosswind41
Mechanism and control of ultra-fine film jet atomization driven by forced breakup of interfacial bubbles41
Interference of multi-pore collapse in explosive crystal under shock loading41
Impact of sandpaper grit size on drag reduction and plastron stability of super-hydrophobic surface in turbulent flows41
The effects of ventilation conditions on mitigating airborne virus transmission41
Comparative performance of cubic and cylindrical graphite heat exchangers: A study using computational fluid dynamics41
Fiber reorientation due to obstacles in open channel flow41
Impact of unsteady suction actuation on drag and wake dynamics of a vehicle model41
Physical modeling of motion and evaporation of polydisperse water droplets in a high-enthalpy air flow41
Combined internal and external natural convection of Bingham plastics in a cavity using a lattice Boltzmann method40
Hydrodynamic modes in nano-channels40
Numerical simulation of two-phase ferrofluid based on spectral element method and phase field model40
Improving cavitating jet erosion efficiency using a multi-orifice nozzle: Experimental and numerical study40
Study on turbulent interaction and noise characteristics of twin vertical axis wind turbines40
Study on the mechanism and microstructural testing of acid-induced hydrothermal phase-change fluid fracturing40
Numerical study on electrophoretic motion of charged droplets with implications for reducing emulsion droplet retention40
A method for evaluating the effect induced by vortices on the moment and efficiency of the fluid machinery40
An analytical model for estimating aerodynamic damping of wind turbines in the shutdown state40
Numerical investigation on aerodynamic characteristics of two rotating cylinders in tandem40
Three-phase flow simulation of beach erosion induced by breaking solitary waves40
Numerical analysis of artificial reef performance in mitigating seabed liquefaction under gravity waves39
Drag force and heat transfer characteristics of deformable alumina droplets in compressible flows39
Mode interpretation and force prediction surrogate model of flow past twin cylinders via machine learning integrated with high-order dynamic mode decomposition39
Lost circulation detection method based on cepstrum analysis of transient pressure waves39
New insights into reservoir on chip: Numerical investigation and experimental validation39
Rheology of amino-functionalized graphene oxide suspensions in hydrogels39
Feature-based manifold modeling for the quasiperiodic wake dynamics of a pair of side-by-side cylinders39
A potential-based linear stability analysis of bilayer Couette and film flow with topography present39
Scaling up in situ combustion process for enhanced oil recovery in water-flooded light oil reservoirs from laboratory to field implementation39
Eco-friendly cellulose wearable heaters using Korean traditional Han paper coated with graphene nanosheets via binder-free supersonic spraying39
Study on optimization of fracturing timing based on geological-engineering integration: A case study of water injection development area in the Ordos Basin39
Linear polymer chain diffusion in semi-flexible polymer network: A dissipative particle dynamics study38
Measurement of wind barrier protection performance using a novel large-scale wind tunnel experimental methodology with complementary numerical simulations: A case study of the innovative diffusible di38
Unsteady forces on elongated bluff bodies38
Aerodynamic performance analysis of vertical axis wind turbine arrangements around a horizontal axis wind turbine tower for both turbines power enhancement38
Magnetosonic shock waves in degenerate electron–positron–ion plasma with separated spin densities38
How does the diurnal biological clock influence electrokinetics in a living plant?38
Enhancing numerical accuracy in the prediction of rotor wake vortex structures38
Non-Fourier heat transfer of Maxwell nanofluids with couple stress driven by alternating-current electroosmotic flow and oscillatory pressure-driven flow based on the dual-phase-lag model in parallel 38
Investigation of the evolution process and propulsion performance of the longitudinal pulsed detonation in rotating detonation combustors38
Effects of different physical properties of anthracite powder fuel on detonation characteristics of a rotating detonation engine38
Confinement-controlled infiltration–fracturing transition in two-phase flow through deformable porous media38
Quantitative evaluation of turbulence reconstruction algorithms for flux estimation based on the characteristics of atmospheric turbulence38
Effects of the parameters of inner air cylinder on evolution of annular SF6 cylinder accelerated by a planar shock wave38
Ring-bouncing induced by the head-on impact of two nanodroplets on superhydrophobic surfaces38
Flow boiling heat transfer characteristics of de-ionized water in superhydrophobic microchannels under electrowetting actuation38
Fission dynamics and post-slope evolution of nonlinear internal waves over gentle continental shelves38
The shielding effect and interaction mechanism of the air bubble on the cavitation bubble in aeration methods: A numerical study37
A numerical study of the influence of the wave reflection on the hydrodynamic characteristics of a cylinder with moonpool37
Migration and plugging for temporary plugging balls in a multi-cluster fractured horizontal well37
A turbulent diffusion coefficient model of micro-mixing jet flow based on deep learning37
Motion characteristics of a single bubble in liquid metal under a streamwise magnetic field37
Convection and evaporation dynamics of multicomponent droplets on nanostructured superhydrophobic surfaces37
Fabrication of wear-resistant and superhydrophobic aluminum alloy surface by laser-chemical hybrid methods37
Analysis of physiological pulsating flow of fractional Maxwell fluid in a locally narrow artery37
Enhanced gas source localization using distributed internet of things sensors and Bayesian inference37
Rheology of brain tissue and hydrogels: A novel hyperelastic and viscoelastic model for forensic applications37
Mechanisms of dust agglomeration and self-cleaning on a superhydrophobic surface during condensation37
Effect of tab length on supersonic jet mixing37
Multiple solutions in magnetohydrodynamic stagnation flow of hybrid nanofluid past a sheet with mathematical chemical reactions model and stability analysis37
Characterization of particle removal in an airlift pump with a U-bend37
Simulating surfactant effects in phase-transforming fluids37
Effect of surface roughness and blade material on the performance of a stationary Savonius wind turbine under different operating conditions36
Small-amplitude waves in a floating poroelastic plate forcing by vertical pitching plate36
A mathematical model for predicting liquid release and spraying characteristics of fixed-wing airtankers36
A numerical study of the effects of jet-aft wall temperatures on the dynamics of jets in hypersonic crossflows36
Mechanistic insight into a salt- and heat-resistant nanocomposite rheology modifier for enhanced performance of water-based drilling fluids36
Impact of missing insert positions on the sand-control performance of slant-insert sand-blocking walls36
The effect of damping on the vortex-induced vibration of a rectangular prism36
Study on fluid mobility in shale oil reservoirs considering mineral composition and stress sensitivity36
Optimization design and experiment of a double-suction centrifugal fan with flow physics analysis36
A mathematical model and analytical solution for a self-propelled heaving hydrofoil in close proximity to free surface36
Variational quantum nonlinear solver for nonlinear dynamics: Implementation and investigation36
A generative adversarial network based on an efficient transformer for high-fidelity flow field reconstruction36
On low-frequency unsteadiness of single-incident and dual-incident shock waves/turbulent boundary layer interactions with large-scale separations36
Numerical and experimental investigation of flow-induced noise control on a hydrofoil using streamwise electromagnetic force36
Formation and evolution of vortex breakdown consequent to post design flow increase in a Francis turbine36
Swin Transformer based fluid classification using Gram angle field-converted well logging data: A novel approach36
The effect of nuclei population on cavitation evolution and load characteristics of a hemispherical–cylindrical structure36
Multiscale analysis of diffusioosmotic transport of micropolar fluids in microchannels36
Soot emissions of steady and oscillatory candle flames35
Learning mappings of thermal updraft fields under unknown operating conditions using a deep operator network35
Cavitation characteristics of water guided laser nozzle on water jet fiber stability35
The ejecting lamella of impacting droplets on superheated concave surfaces35
Numerical study on the effect of design parameters of circumferential multiple grooves on tip leakage flow reduction in a transonic turbine35
A classical fluid mechanics description of the spin-up and spin-down states that violates the Clauser–Horne–Shimony–Holt inequality35
Computational comparison of passive control for cavitation suppression on cambered hydrofoils in sheet, cloud, and supercavitation regimes35
Fluid–solid coupling simulation of excavation-induced response in fault-crossing tunnels: A case study from North Sumatera, Indonesia35
Wind-driven transport on the rotating spherical Earth35
Experimental investigation on the interaction between mode-2 internal solitary wave and horizontal transverse cylinder35
Wake-induced response of a flexible splitter plate detachedly placed downstream of a circular cylinder35
Wake characteristics of wall-mounted solid and foam-covered circular cylinders35
Resilient Semi-Supervised Meta-Learning Network based on wavelet transform and K-means optimization for fluid classification35
Magneto–thermal instability in Rivlin–Ericksen nanofluids for hyperthermia therapy and polymer processing35
Progressive failure and strength weakening mechanisms of coal wetted by SiO2 nanofluids with different concentrations35
Microbiologically influenced corrosion and community dynamics of oil-well produced water at different temperatures34
Printing of liquid metal by electrically modulating of interface tension in liquid environment34
Breathers, rogue waves, and interaction solutions for the variable coefficient Kundu-nonlinear Schrödinger equation34
Effects of thermal expansion on moderately intense turbulence in premixed flames34
Correlation between surface wettability and fluid physics characteristics of lignite under compound solution regulation34
Direct numerical simulation of momentum and heat transfer for a particle near the no-slip wall34
Pore-scale simulation of liquid retention in stratified porous microstructures34
The change in inertial particle clustering in turbulent flow due to collision-coagulation: A Voronoi analysis34
Energy harvesting using piezoelectric sheet fixed on a flexible plate attached to a cylinder in free stream flow34
Motion characteristics of large arrays of modularized floating bodies with hinge connections34
Analysis of the convective heat transfer performance of multi-morphology lattice structures in thermal management of high-speed aircraft34
Effects of the geometrical parameters on rectification characteristics of convergence angle throttle orifice plates34
Melting process of Carreau non-Newtonian nano-phase change material inside cylindrical energy storage system: Effect of thermal fins34
Steam condensing flow in cascade turbine blades and nozzles using simple low dissipation upwind scheme34
How hydrofoil leading-edge biomimetic structure affects unsteady cavitating flow: A numerical study34
Effects of rotor squealer tip with non-uniform heights on heat transfer characteristic and flow structure of turbine stage34
Collapse dynamics of a single cavitation bubble in proximity to a wall with two protrusions33
Research of the roll motion on hydrodynamic performance and wake interaction of a side-by-side tidal stream turbine array33
Comparative hemodynamic assessment of saccular and fusiform aneurysms in patient-specific internal carotid artery models: Rupture risk analyses33
A lattice Boltzmann model for incompressible gas and liquid two-phase flows combined with free-surface method33
Asymptotic expansions and scaling of turbulent boundary layers in adverse pressure gradients33
A constrained grey prediction evolution algorithm for calculating two-phase equilibria at given volume, temperature, and moles33
0.13945412635803