Russian Journal of Applied Chemistry

Papers
(The median citation count of Russian Journal of Applied Chemistry is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-03-01 to 2025-03-01.)
ArticleCitations
Synthesis and Properties of Magnetically Susceptible Porous Carbon Materials Based on Hydrolysis Lignin Modified with ZnCl2 and FeCl337
Use of Metal Oxide–Silica Fillers NiО‒SiO2 and СuO‒SiO2 as Active Modifiers of Polyurethane Composites18
Production of Carbon Dioxide Hydrates Using Frozen Aqueous Solutions of Polyvinyl Alcohol14
Thermal Synthesis of Aliphatic Petroleum Polymer Resins11
Interpolymer Complexes and Problem of Polymer Waste Management10
Methanol Dehydrogenation to Methyl Formate Catalyzed by Cu/SiO2 Catalysts: Impact of Precipitation Procedure and Calcination Temperature10
Preparation of Metal Corrosion Inhibitors from Arylamines and Butadiene9
Pyrolysis of Polyamide-Containing Materials. Process Features and Composition of Reaction Products8
Heat-Resistant Polyorganosiloxane Dielectrics7
Extractive Recovery and Separation of Palladium(II) and Platinum(IV) from Chloride Solutions7
Microstructure of Hydrogen-Sorbing Composites Based on a Eutectic Magnesium Alloy with Nickel7
Adsorption of Wet Ammonia on the Surface of Vanadium-Containing Silica Gel7
Optimization of Conditions for the Synthesis of 4,4-Dimethyl-1,3-dioxane from tert-Butanol in the Presence of Carbon-Сontaining Porous Materials6
Properties of PET Impregnated Nonwoven Fibers in Polyurethane Based on Lignin Modified with Polyvinyl Butyral6
Recovery of Zinc, Copper, Nickel, and Cobalt from Electroplating Wastewater by Electro-Nanofiltration6
Thermal Stability of Modified Epoxy Polymers with Aminophenol Groups Introduced during Chemical Crosslinking6
Preparation of Glassy Carbon Microspheres for Use in Electrochemical Analysis6
Antibacterial Activity of Silver Nanoparticles Stabilized on the Surface of Natural Aluminosilicate Nanotubes toward Ps. aeruginosa6
Investigations on the Formation of Transition Metal Phosphides during the Hydrotreating of Light Cycle Oil6
Physical-Mechanical and Sorption Properties of Cross-Linked Chitosan Based Film Materials6
Electrochemical Determination of Streptomycin on an Electrode Modified with a Composite of Graphene Oxide and Gold–Nickel Binary System5
Epoxy Nanocomposites Modified with Functionalized Multiwalled Carbon Nanotubes5
Europium Benzoylacetonate-Modified Mesoporous Silica Capillary Columns5
Adsorption Properties of Composite Sorbents Based on Thermally Expanded Graphite5
Epoxy Nanocomposites with Metal-Containing Fillers: Synthesis, Structure, and Properties5
Structure–Property Model for Predicting the Cycloalkane Octane Ratings from the Topological Characteristics of Molecules5
Luminescent Europium(III) Compounds with Quinaldic Acid5
Cytotoxicity and Gene Expression Studies of Curcumin and Piperine Loaded Nanoparticles on Breast Cancer Cells5
Radical Copolymerization of p-Aminophenylcyclopropylmethyl Methacrylate with Methyl Methacrylate5
Dependence of the Oil-Collecting and Oil-Dispersing Ability of Surfactants on the Kind of Alkyl Radicals in Their Head Group5
Nanocrystalline Lanthanum Cobaltite as a Material for Gas Sensors4
Properties of Zinc Oxide Adsorbent for Adsorbing Hydrogen Sulfide4
Application of Rare Earth 1,3-Diketonate Derivatives as Radioluminophores4
Recovery of Rhodium, Ruthenium, and Palladium from Nitric and Hydrochloric Acid Solutions with Iron(III) Hexacyanoferrate(II)4
Recovery of Palladium(II) and Platinum(IV) with Heterochain Complexing Sorbents from Solutions Simulating Leaching Solutions of Spent Industrial Catalysts and Spent Refining Solution4
Concise Synthesis of Silver-Containing Titania Xerogels4
Hydrogenation of Guaiacol on Nanoscale Supported Ruthenium Catalysts: Influence of Support Particle Size and the Presence of Bio-oil Oxygenates4
Plasma-Assisted Catalytic Decomposition of Carbon Dioxide4
Conditions of Formation of Stable Polyelectrolyte Complexes Based on N-Succinyl Chitosan and Poly-N,N-diallyl-N,N-dimethylammonium Chloride4
Study on 2,6-Monosubstituted Bisphenol A Isophthalaldehyde Phenolic Resin and Its Reversible Thermochromic Composite SSBR Film4
Effect of Chromium Oxide Additions on the Stability of Glass Ceramic Sealants for Solid Oxide Fuel Cells4
Thermal Structure of the Filtration Combustion Wave of CаH2 in a Flow of a SiF4 + H2 Mixture4
Synthesis of Struvite in Aqueous-Salt Systems in which Competing Phases of Magnesium Phosphate Crystal Hydrates of Different Compositions Can Be Formed4
Highly Hydrophobic Polyurethane Coatings Modified with an Organosilicon Block Copolymer and Amino-Functionalized Nano/Microdispersed SiO2–NH24
Enhanced Optical and Electrical Properties of Graphene Oxide-Silver Nanoparticles Nanocomposite Film by Thermal Annealing in the Air4
Change in the Functional Composition of the Carbon Surface upon Water Vapor Activation4
An Experimental Study of the Melt Immiscibility and Distribution of Rare Earth Elements, Р2О5, and Nb2O5 between Immiscible Melts in the Monazite–SiO2–NaF–Nb2O5 System4
Pyrolysis of Polyethylene Terephthalate: Process Features and Composition of Reaction Products4
Technology of Chemical Precipitation of Struvite from Saturated Water of Acid Scrubbers for Ammonia Absorption3
Preparation and Properties of Dialdehyddextran3
Oxidative Desulfurization of Petroleum Coke3
Studies on Adsorption Isotherm and Adsorption Kinetics to Predict the Behavior of an Ionic Liquid Based Adsorbent in Desulfurization of Model Diesel3
Magnesium Hydrogen-generating Materials and a Hydrogen Generation Setup3
Sorption Selectivity of Palladium(II) by Poly(N-2-Sulfoethylallylamine) under Static and Dynamic Conditions3
Heterocyclization of Olefins with Sulfur in Ultrasonic Cavitation Field3
Influence of Temperature of Silicon Dioxide Powder Annealing on the Aluminum-Induced Crystallization of Polycrystalline Silicon3
Preparation of Vanadyl Phthalocyaninate in a Mixture of n-Alkanes3
Microwave-Stimulated Conversion of a Tar/Lignin Blend into Hydrocarbons in a Plasma-Catalytic Mode3
Modifier Based on Dicyandiamide and Dimethyl Phosphite for Fire and Heat Resistant Elastomer Materials3
Kinetic Heterogeneity of the Catalytic System Based on Gadolinium Chloride Solvate in 1,4-cis-Polyisoprene Production3
Synthesis of Novel Conductive Nanocomposites Based on Polyaniline and Poly(aniline–co-melamine) Grafted on Tragacanth3
Impact of Conditions of Methyl Methacrylate Suspension Polymerization on the Particle Size Distribution of the Polymer3
Neodecanoic Acid Diamides as Inhibitors of Acid Corrosion of Low-Carbon Steel3
Synthesis and Study of Mixed Diesters of Synthetic Petroleum Acids and Fatty Acids3
Preparation, Structure, and Properties of Chitosan Microtubes3
Kinetics of Photooxidation of Dihydric Phenols in the Presence of Hydrogen Peroxide and Potassium Persulfate3
Synthesis and Properties of TiO2–SiO2/CaO Biomaterials with Spherical Particles Based on Tokem-200 Cation Exchange Resin3
Low-Temperature Carbon Monoxide Oxidation with Oxygen in the Presence of Heteropolyacids3
Activation of Nickel(II) Chloride in Liquid-Phase Synthesis of Tris(hydroxymethyl)phosphine3
Synthesis of para-Dichlorobenzene by Chlorobenzene Chlorination on NaY Zeolite Heterogeneous Catalyst3
Study of the Equilibrium of Heterophase Reactions in the Gas–Liquid System Using Hydrogenation of the Carbonyl Group in Ketones3
Physical-mechanical Properties and Morphology of Lignocellulose Powder Modifiers for Vulcanized Rubbers3
Heterogeneous Phosphine-Containing Hydroformylation Catalysts Based on Modified Porous Organic Frameworks3
Tribological Behavior of Chemically Bonded Ceramic Coatings Reinforced with Modified Carbon Fiber3
Extraction and Separation of Co2+ from Ni2+ Using the Novel Task-Specific Ionic Liquids of [C4H9NH3][P507]3
Synthesis and Metathesis Polymerization of Nadimide Derived from β-(–)-Pinene3
Synthesis of Nano-silica Particles using Eucalyptus globulus Leaf Extract and Their Innovative Application as an Adsorbent for Malachite Green Dye3
Effect of Support on Catalytic Properties of Platinum-Containing Catalysts in Hydrogenation of a Biphenyl–Diphenylmethane Eutectic Mixture2
Improvement of the Physicomechanical and Corrosion-Protective Properties of Coatings Based on a Cycloaliphatic Epoxy Matrix2
Study the Convective Heat Transfer Intensification by Using Nanotechnology: A Review2
Interaction of Dispersed Lead Particles with a Fluoroplastic Matrix During Heat Treatment2
Effect of Melts on the Formation of a Zinc-Silicate Phosphor Matrix2
Preparation of Ga Isomorphic Substituted Ultrafine Nanosized ZSM-5 Zeolite and Its Catalytic Performance for MTG Reaction2
Thermodynamic Simulation for Interaction of Polychlorinated Biphenyls with Potassium Hydroxide in Polyalkanolamines2
Steam Reforming of Isobutanol on Biochar-Supported Ni–Co Catalysts2
Influence of the Chemical Composition of an Epoxy Resin and of Its Filling with Nanoparticles of Iron, Aluminum, and Their Oxides on the Enthalpy of Curing with m-Phenylenediamine2
Removal of Arsenic from Waste Heat Boiler Dust of a Copper Plant by Solvent Extraction Using Undiluted Tributyl Phosphate2
Synthesis and Properties of Vanadium Oxide Nanocoatings on the Surface of Polycrystalline α-Al2O32
Specific Features of the Action of a Nanosecond Relativistic Electron Beam on a Syntactic Foam with the Butadiene–Acrylonitrile Rubber Base2
Erratum to: Atomic Layer Deposition of Ni–Mn–O Coatings Using Precursors Equivalent2
Preparation of a Component of a Rubber Stock Plasticizer by Extraction Treatment of Delayed Coker Heavy Gasoil with N-Methylpyrrolidone2
Fe3O4@Si-NH2 Magnetic Reinforcement of Novel Polybutadiene-Based Polyurea2
Biomedical Applications of Nanofibers2
Antifouling Properties of Biocide-Containing Systems Incorporated into Thermally Expanded Graphite2
Microbial Fuel Cells: Their Shapes, Designs, and Transportation Methods (Mini Review)2
Comparison of Methods for Encapsulation of Acetyl Salicylic Acid in Polyelectrolyte Capsules Based on Chitosan2
Optimization and Characterization of a New Environmentally Friendly Adsorbent to Remove Mercury Ions from Aqueous Solutions2
Reinforcement of Polyamide 6 and Its Montmorillonite Composites by Introducing Maleinized Low-Molecular-Mass Polybutadiene Rubber2
Use of SiO2 Nanoparticles Modified with Polyethylene Glycol to Increase the Hydrophilicity of Epoxy Coatings2
Synthesis and Characterization of Carboxymethyl Cellulose-graft-Poly(Acrylamide-co-Crotonic Acid) Hydrogel: Matrix for Ammonium Nitrate Release, as Agrochemical2
Effect of Synthesis Parameters on the Structural, Optical and Electrical Properties of Successive Ionic Layer Adsorption and Reaction (SILAR)-Deposited CuO Thin Films2
Stereoregularity of Polyisoprene Obtained in the Presence of a Catalyst Based on Gadolinium Chloride2
Preparation, Study, and Use of Composites Based on Fluoropolymer Waste2
Hydrogen Bonding in Insensitive High Explosives2
Silver-Containing Nanodispersions Based on the Water-Soluble Copolymer of N-Vinylpyrrolidone with Sodium N-Crotyl-4-aminosalicylate and Crotyl Alcohol: Synthesis and Spectroscopic, Structural, and Mor2
Impact of the Composition of Rubbers Filled with Carboxymethyl Cellulose on Their Properties2
Lignin-Based Adhesives: Extraction, Chemical Modification, and Challenges in Production2
Microporous Hypercrosslinked Polystyrene Sorbents in Sorption Purification of Water-Soluble Polymers from Low-Molecular-Weight Compounds2
Studying the Effect of Chemical Activated Kaolinite on Organic Matter Adsorption from Crude Phosphoric Acid (H3PO4)2
An Investigation of the Effect of CuMoB Nanocatalysts on Efficient Hydrogen Production2
Preparation and Catalytic Performance of Supramolecular Ionic Liquid Catalyst2
Erratum to: N-Substituted 2-Sulfanylacetamide Prunus armeniaca: Synthesis, Characterization, and Adsorption Studies for As(III) Remediation2
Extraction of Aluminum Hydroxide from Aqueous Chloride Solutions in the Presence of Hardness Salts and Surfactants of Various Nature2
Crystallization of SAPO-11 Molecular Sieves from Silicoaluminophosphate Gels with Various SiO2/Al2O3 Ratios2
Use of a Graft Copolymer of Low Molecular Weight Polyethylene and Acrylic Acid in Carbon Black-Filled Polyethylene Compouns2
Composite Fibers Based on Hydrated Cellulose and Poly-N-vinylpyrrolidone, Prepared from Cellulose Solutions in N-Methylmorpholine-N-Oxide2
Life Cycle Assesment of Powertrains Based on a Battery, Hydrogen Fuel Cells, and Internal Combustion Engine for Urban Buses under the Conditions of Moscow Oblast2
Diglycidyl Ether of Bis-phenol-A, Epoxy Resin and Triphenylamine Linked Azomethine-Based Polymer Networks as Thermally Resistant, Blue Light Emissive Smart Materials2
Synthesis of Silver Particles in Micelles Stabilized by a Vinyl Acetate–N-Vinylpyrrolidone Block Copolymer2
Synthesis of High-Purity Basic Bismuth(III) Succinate as a Pharmaceutical Substance2
Fusibility of Agricultural Plant Waste Ash under the Conditions of High-Temperature Processing2
Development of an Analytical Approach to Study the Surface Morphology and Roughness Analysis of Commercial Hydrotreating CoMo-γAl2O3 Catalysts via Atomic Force Microscopy (AFM) Analysis2
A Review in Linear Alkylbenzene (LAB) Production Processes in the Petrochemical Industry2
CrOx–ZrO2–SiO2 Catalysts for Nonoxidative Propane Dehydrogenation, Prepared by Impregnation and One-Step Precipitation of the Components2
Influence of the Silicon Deposition on the Industrial Silicon Trapping Catalyst2
The Formation of Polymer Materials with Increased Thermal Stability1
Properties of Metal-Containing Composites Based on Blends of Low- and High-Density Polyethylene1
Influence of the Deposition Temperature on the Structure of Thin Molybdenum Disulfide Films Formed by Chemical Vapor Deposition1
Reductive Treatment of δ-MnO2 with Sodium Borohydride: Method for Increasing the Electrode Material Capacitance1
Preparation and Photoluminescence of Europium(III) Complexes with TPPO as Neutral Ligand1
Extraction of Yttrium-Subgroup Rare Earth Elements with Aliquat 3361
Synthesis Methods for Preparation of Nanotechnology in Food Packaging1
Effect of Steam–Air Treatment of Alumina–Chromia Dehydrogenation Catalysts on Their Physicochemical and Catalytic Characteristics1
An Influence of Nano-Sized Fillers Fe3O4, ZnO on the Thermal Oxidation Resistance of Inhibited Polyethylene1
Erratum to: Corrosion of Electrical Alloys Based on the Al–Mg–Sc System1
Influence of the Structure of the Aminoalkyl Group in Polysiloxane on the Selectivity of Its Interaction with Metal Ions1
Use of Microwave Radiation for Denitration of Uranyl Nitrate Solution and Subsequent Sintering of Uranium Dioxide Fuel Pellets1
Modified Activated Carbon/Cu(OH)2 Nanocomposite for Oil/Water Emulsion Separation1
Treatment of Phosphorus-Containing Raw Materials with Alkaline Solutions1
Extraction Properties of 1-(2-Neononylamidoethyl)-2-neononyl-2-imidazoline Hydrochloride in Gallium(III) Recovery from Hydrochloric Acid Solutions1
Furfural Hydrogenation in the Presence of Ru and Pd Catalysts Immobilized on Hybrid Materials Based on Mesoporous Phenol–Formaldehyde Polymers and Silica1
Synthesis and Properties of Carbon Gels Based on Larch Bark Tannins and Hydrolysis Lignin1
Study of Aerosol Particle Coagulation in an Ultrasonic Scrubber Chamber1
Oxidation of Organic Sulfur Compounds in the Presence of Heteropoly Acids Immobilized on Mesoporous Silicates1
Study of Water Absorption by Polyamide Composites Filled with Lignin-Derived Graphite Materials1
Effect of Nanodispersed Carbon Black on the Aggregative Stability of Butadiene–Styrene Latex in Liquid-Phase Filling in an Ultrasonic Field1
Synthesis and Properties of Polymeric Rifabutin Forms with Different Types of Polymer–Antibiotic Bonding1
Controlled Synthesis of Polymer Matrices Based on N-Vinyl Succinimide and N-Vinylpyrrolidone for Immobilization of Low Molecular Weight Active Pharmaceutical Ingredients1
Antimicrobial Popymers: Homopolymers and Copolymers of Cefotiam-Binding Acrylamide1
Chitosan-Modified Calcium Alginate Microspheres for Cefotaxime Immobilization1
CrOx–SiO2 Catalysts in Nonoxidative Propane Dehydrogenation: Effect of Adding Cerium Dioxide1
Study of the Composition of Volatile By-Products, Formed by Dissolution of Wood in Ionic Liquids Based on 1-Butyl-3-Methylimidazolium1
Film Materials Based on Polymer Blends of N-Succinyl Chitosan Sodium Salt with Poly-N-vinylpyrrolidone1
Chemical and Biochemical Reactors for Controlled Synthesis of Organic and Inorganic Compounds1
Formation and Properties of Nickel Contacts to Thermoelectric Materials Based on Bismuth and Antimony Chalcogenides1
Production of Magnetic Carbon Materials during Decomposition of Iron Salts Deposited on a Porous Carbon Matrix1
Advantages and Disadvantages of Connect Anti-Surge System Gas Pipe of Multistage Centrifugal Recycle Gas Compressor with Process Heat Exchanger in Power Former Unit in Daura Refinery1
Low-Temperature Synthesis of Electrically-Conductive Pigment Zinc Oxide Doped with Gallium Donor1
Photocatalytic Activity of Titanium Dioxide Immobilized in Polyacrylamide Hydrogels with Different Degrees of Crosslinking1
Chitosan–Glucan Complex from Fruiting Bodies of Higher Fungi as a Base for Functional Film Hybrid Biocomposites1
Concentration of Ionic Groups as a Factor to Control Adsorption and Mass Transfer Properties of Aromatic Poly- and Copolyamide Based Ultrafiltration Membranes1
Substituted Propargylamines—Acid Corrosion Inhibitors for Steel in Petroleum Industry1
Erratum to: Effect of Synthesis Parameters on the Structural, Optical and Electrical Properties of Successive Ionic Layer Adsorption and Reaction1
Synthesis of Clay-Based Catalysts for the Degradation of Polyolefins by Mechanical Activation1
Production of Highly Pure Methyl tert-Butyl Ether1
State of the Art and Prospects for the Development of Technologies for Solvent-Free Deoiling of Slack Waxes1
Synthesis of Polysilazane by Ammonolysis of Dichlorosilane in a Nucleophilic Solvent1
Features of Phase Formation during “Dry” Neutralization in the System Na2CO3–H2O–HxAn1
Prospects for Using Hydrogen in Various Branches of the World Economy as One of the Directions of Its Decarbonization1
A New Approach to the Synthesis of Diethyl 2,3-Diisobutylsuccinate, a Component of Titanium–Magnesium Catalysts for Propylene Polymerization1
Synthesis and Antimicrobial Activity of 3-Substituted 8-Propenylbenzo[e][1,3]oxazines1
Features of the Use of Ammonium Nitrate in the Sulfide-Bearing Ore Mining1
Sorption of Gases in Additive Polynorbornene with Norbornyl Substituents1
Thermally Stable Magnetic Polyurethane Nanocomposites Prepared from Functionalized Polybutadiene: Novel Approach to the Polybutadiene Chemical Modification1
Nickel Passivation on Cracking Catalysts1
Modeling of Degassing of Viscoplastic Liquids in a Cylindrical Hydrocyclone1
Copper(II) Stearate-Based Copper-Containing Nanomaterials as Antifriction Additives to Lubricating Oils1
Reactive Adsorption Desulfurization of Dibenzothiophene in Presence of Mesoporous Adsorbents1
Anionic Polymerization of Epoxy Resins under the Action of Imidazoles1
Selective Synthesis of Olefins on a Co-Al2O3/SiO2 Catalyst by the Fisher–Tropsch Method1
Synthesis and Thermal Stability of Bis-Quaternary Ammonium Ionic Liquids with Inorganic Anions1
Morphological and Conductivity Studies of Fullerene (C60) and N-Vinyl Carbazole Based Interpenetrating Polymer Network1
Catalysts for Carbonylation of Alcohols to Obtain Carboxylic Acids and Esters1
Characteristics of Stereoregular cis-1,4-Polyisoprene Obtained under the Conditions of a Large-Tonnage Production Process on Titanium and Lanthanide Catalysts Modified in Turbulent Flows1
Use of the Peroxide Method for Vanadium Activation to Obtain Mixed Keggin-Type Heteropoly Compounds1
Influence of the Gas Medium Composition on the Thermal Decomposition of Ammonium, Sodium, Potassium, and Calcium Hypophosphites1
Preparation of Calcium Fluoride Nanoparticles by Double-Jet Precipitation1
Sorption Properties of the Manganese(IV) Oxide/Mechanically Activated Graphite Composite with Respect to As(III) Compounds1
Development of Low-Cost Silica-Based Core Material for Fire-Resistant Doors of Vessels1
Calix[4]arene-Bonded Nano Silica Gel as an New, Efficient and Reusable Catalyst for the Synthesis of Xanthenes1
Investigation of Polyaniline-Modified Aqueous Dispersion Materials and Coatings1
Automated Hydrogen Generator1
Bio-Nanocomposite Hydrogel Beads Based on Cellulose and Biogenic Silver Nanoparticles Prepared by ex-situ and in-situ Methods for Antibacterial Applications1
Comparison of Various Options for Designing the Direct Oxidation of Methane to Methanol1
Adsorption of Alizarin Red onto Carbon Black1
Synthesis of New Bis(arylsulfanyl Diketones) as Promising Building Blocks with Fungicidal Activity1
Progress of Commercial Technologies for Producing Syngas and Hydrogen from Hydrocarbon Gases1
Perfluorosulfone Membrane Modified with Ni2+ Cations for Visual Control of Air Humidity1
Phase Transformations and Formation of Nanofibers under the Action of a Nanosecond Relativistic Electron Beam on Syntactic Foams with a Polymeric Siloxane Binder1
N1-, N2-, and N3-Methyl-4-nitro-1,2,3-triazoles and Metal Complexes Based on Them1
Derivatives of Neopentanoic Acid Hydrazide as Reagents for Flotation Recovery of Non-Ferrous Metals1
Effect of Diethylene Glycol on the Formation of the Oxide Precursor of the Nickel–Molybdenum Hydrotreating Catalyst1
Hydrogenation of Furfural on Pt- and Pd-Containing Catalysts in an Aqueous Medium1
State of the Art and Prospects for the Development of Methods for Determining the Group Hydrocarbon Composition (SARA Composition) of Crude Oil and Petroleum Products1
Effect of the Heat Treatment of Pyrolysis Fuel Oil on the Naphthalene Yield and Quality1
Synthesis and Molecular-Hydrodynamic Characteristics of Comb-Shaped Random Copolymers of N-Methyl-N-vinylacetamide and N-Methyl-N-vinylamine with Dodecyl Side Groups1
Specific Features of the Formation of Cubic Al-Substituted Li7La3Zr2O121
Development and Characterization of Copper Nanoparticles Embedded Polymeric Microbeads for Drug Delivery and Antibacterial Applications1
Formation of the Percolation Network by Carbon Black Particles in Blends of Incompatible Polymers under the Conditions of Shear Strain of the Melt1
Application of Nanofibers in Virus and Bacteria Filtration1
Improvement of the Extraction Technology for Production of Mineral Oils1
Hydrodeoxygenation of Bio-oil Components Containing a Guaiacol Fragment in the Presence of a Ruthenium-Suppoting Mesoporous Aluminosilicate Catalyst1
Effect of the Nature and Concentration of the Fuel on the Structure and Morphology of ZnO Microspheres Produced via Spray Solution Combustion Synthesis1
Design, Synthesis, and Fungicidal Activity of 2-Alkylthio-5-(1,2,4-triazol-1-ylmethyl)-1,3,4-oxadiazoles1
An Impact of Sorbent-Filler on the Temperature of Thermal Degradation of Composite Sorption-Active Materials Based on Zeolite and Fluorinated Ethylene Derivatives1
Synthesis and Luminescence Properties of a New Complex of Divalent Europium with Cinnamic Acid, Eu(L)2(THF)4 (L = Cinnamate Anion, С6H5СH=СHCOO–)1
Nanotechnology of Molecular Layering in Production of Inorganic and Hybrid Materials for Various Functional Purposes: II. Molecular Layering Technology and Prospects for Its Commercialization and Deve1
Mechanochemical Modification of Nickel Aluminide with Aluminum Oxide1
Development of an Epoxy-Amine Oligomer-Based Pigment Paste Production Technology for Obtaining Cathodic Electrodeposition Coatings0
Binders Based on Solution of Polyvinyl Butyral in Di(1-methacryloxy-3-chloro-2-propyl) Methylphosphonate–2-Hydroxyethyl Methacrylate Mixture for Difficultly Combustible Glass-Reinforced Plastics0
Synthesis of Addition Poly(5-methyl-2-norbornene) in the Presence of Palladium Complexes Containing Acyclic Diaminocarbene Ligands0
Highly Heat-Resistant Poly(Amido Hydroxy Amides) with Increased Elongation at Break and Photosensitive Formulations Based on Them0
Electrochemical Deposition of Sb2S3 Thin Films0
Erratum to: On the Mechanism of Sulfur Removal during Hydroconversion in the Presence of a Catalyst MoS20
Synthesis, Heat Resistance, and Mechanical Properties of Cross-Linked Urethane–Imide Copolymers Containing Blocks of Two Structurally Different Aliphatic Fragments (Polyether and Polyester) in the Bac0
Performance Investigation of Electrochemical Micro Machining Process Using Salt Free Composite Electrolytes0
Use of Synthetic Iron Oxide-Doped Titanium Dioxide Nanoparticles in Photocatalytic Degradation of BTX from Petroleum Wastewater0
Behavior of Cationic Surfactants in Rubber Latex Coagulation0
An Improved Process for Industrial Production of n-Propyl Bromide0
Nanocomposites of Graphene Oxide and Metal-Organic Frameworks0
Thermodynamic and Electrochemical Investigations of Potassium–Antimony Alloys0
Oxalic Acid Activation of the Mechanochemical Synthesis of Copper–Zinc–Aluminum Catalysts for Steam Conversion of Carbon Monoxide0
Diameter Dependent Fluorescent Intensity of Amorphous TbxOy Nanowire Arrays and Their Tunable Fluorescent Intensity Induced by Eu3+/Sm3+ Doping0
Catalytic Activity of Alumina-Modified Silica Gels in Methanol Conversion to Dimethyl Ether0
Erratum to: Kinetics of Calcium Carbonate Dissolution in Carboxylic Acids0
Erratum to: Solid–Liquid Extraction of Rare Earth Elements Ce(IV), Pr(III), Er(III), and Y(III) from Concentrated Phosphoric Acid Solutions Using Strongly Acidic Cation Exchange Resin (SQS–6)0
Preparation of a Water-Soluble Molybdenum(VI) Complex with Nitrilotriacetic Acid and Monoethanolamine. Molecular Structure of Triammonium Hydrate [Trioxo(nitrilotriacetato)molybdate] (NH4)3[MoO3L]∙H2O0
Preparation and Performance of SAPO Molecular Sieve Solid-loaded Ionic Liquid Catalysts0
Liquid Crystal Polymers: Overview of Characteristics and Applications in Communication and Biomedical Technologies0
Synthesis of CuO–Cu4O3 Composite in Combustion Reactions of Nitrate–Organic Precursors0
Enantioselective Bioreduction of 5-Hexen-2-one in Directional Synthesis of Insect Pheromones0
3D Printing of Hydrogel-Based Biocompatible Materials0
Morpholine Adduct of C70 Fullerene: Sonochemical Synthesis and Mechanism0
Extraction Methods for Removing Sulfur and Its Compounds from Crude Oil and Petroleum Products0
Sequential Steps for Purifying Wet Processed Phosphoric Acid for Producing a High-Tech Grade and Barium or Ammonium Phosphate Salts0
Photocatalytic Degradation of Antibiotic Norfloxacin Aqueous Solution by Ce/Bi2WO6: Optimization and Simulation of Process by RSM0
Surface Modification of Kosa Silk Fiber by Graft Copolymerization with Vinyl Benzyl Trimethylammonium Chloride (VBT) and Its Antibacterial Study0
Synthesis of TiO2-Modified Carbon Aerogel Photocatalysts and Their Application for Removing Formaldehyde in Air0
Cross-Linking in the Molecular Structure of Poly(vinyl butyral) and Properties Investigation0
Fabrication of a Novel BiVO4/NiFe2O4/ATP Composite Photocatalyst with Enhanced Visible Light Photocatalytic Performance for Degradation of Malachite Green0
0.073064804077148