Journal of Friction and Wear

Papers
(The median citation count of Journal of Friction and Wear is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)
ArticleCitations
Influence of Oxynitriding on Antifriction Properties of Ti–6Al–4V Titanium Alloy14
Contact Interaction in Precision Tribosystems11
Friction and Wear of ZrN Coatings under Conditions of Microcontact Using Atomic-Force Microscopy10
Frictional Strength of Electric Spark Coatings from Powder Wires under Friction without Lubrication9
Mechanical Admixture Influence in the Working Fluid on Wear and Jamming of Spool Pairs from Aircraft Hydraulic Drives9
The Influence of the Thermoelastic Instability on the Wear of Composite Brake Discs8
A Lubricant for Rotaprint Lubrication of the Wheel–Rail System8
Formation of Surface Structures under Friction in Synthetic Oils8
Method for Calculating the Fatigue Life of Bearings Taking into Account Wearing of Rolling Elements7
Comparative Analysis of Tribological and Mechanical Properties of Extrudable Polymer–Polymer UHMWPE Composites Fabricated by 3D Printing and Hot-Pressing Methods7
Optimization of Tribotechnical Characteristics of Wheel–Rail Friction Modifiers7
Tribological Characteristics and Wear Features of Powder Tin Bronze with the Addition of Ultrafine Oxides7
Effect of Antifriction Solid Additives on the Temperature Stability of Bentonite Greases7
Frictional Properties of 3D Printing Polymers in Vacuum6
Protector Wear Forecasting on Elastic Characteristics of Tires6
Size Determination of Abrasive Particles that Penetrate into the Wedge-Shaped Gap of Gear Teeth6
Investigation of Tribological and Strength Properties of ABS/CF Fibrous Composites Formed in Fused Deposition Modeling6
Effect of the Adhesive Properties of Vacuum Ion-Plasma TiAlN Coatings on Wear Resistance in Friction6
Calculation of Friction Characteristics of Disc Brakes Used in Repetitive Short-Term Braking Mode5
Influence of Various Carbon Allotropes on Tribological and Rheological Characteristics of Model Lubricating Systems5
Effect of Elevated Temperatures on Tribological Characteristics of a Plasma-Sprayed Al2O3 Coating under Sliding Conditions without Lubrication5
Evaluation of Tribotechnical Characteristics for Tribosystems in the Presence of Fullerenes in the Lubricant5
Tribological Properties of Sintered Al–Sn Alloy Doped with Iron5
Tribotechnical Properties of a Copper-Based Powder Friction Material with the Addition of Iron-Chromium Alloy Powder5
Methods and Means of Reducing Friction Torque in Face Seals5
Tribotechnical and Ecological Evaluation of Friction Pairs of Brake Devices in Lifting and Transport Machines5
Friction and Wear of Electrospark Coatings Made of Molybdenum, Bronze, and Combined (Ti + Al + C) Composition on Steel 45 in a Lubricant Medium4
Metal Plating of Friction Surfaces of the “Wheel–Rail” Pair4
Influence of Running-In on the Friction Coefficient of C/C Composite Materials for Aircraft Brakes4
Rolling Friction of Hybrid Ceramic–Steel Pairs under Different Lubrication Conditions4
Influence of Formation of Nanocomposite Films on Friction Surfaces on the Antifriction Properties of Transmission Oil4
Tribological Properties of Iron-Based Powder Composite Materials with Addition of Graphite, Alumina and Zirconia Nanoparticles4
Wear under Conditions of Dry Friction of a Composite Material Based on an Aluminum Alloy Reinforced with Nanocrystalline Graphite4
Structural-Energy Interpretation of a Tribosystem4
Evaluation of Anti-Friction Properties of Solid Lubricant Coatings for a Piston Skirt of a High-Force Diesel4
Effect of Nanostructuring of Aluminum, Copper, and Alloys on Their Basis Wear for Resistance and Hardness3
Wear Resistance Increase of Single-Carbide Hard Alloys after Bulk Pulse-Laser Hardening3
The Influence of the 3D Printing Infill and Printing Direction on Friction and Wear of Polylactic Acid (PLA) under Rotational Sliding3
Improvement of Ti6Al4V-Alloy Wear Resistance by Electric-Spark Hafnium Carbide Coatings3
Structure and Tribological Properties of a Ti–TiN Coating Obtained by Hypersonic Metallization3
Study of the Influence of Carbon Fibers and Bentonite on the Tribological Properties of PTFE3
Research of the Lifetime and Lubricant Properties of Greases for Rolling Bearings Operating in Space Conditions3
Influence of Porosity on Wear Resistance of Sintered Titanium under Boundary Lubrication3
Method of Tool Wear Control during Stainless Steel End Milling3
Formation of Boundary Lubricating Films at Friction in Sunflower Oil with Addition of 1,3-Diketones3
Development of Damping Support for a Turbine Pump Assembly of a Cryogenic Fuel Aviation Gas Turbine Engine3
Tribological Characteristics of Chemically Inactive Surfaces in Lubricants Doped with Cholesterol and Fatty Acid Compounds3
Surface Microgeometry and Microstructure of the Gas Laser Cut of a Two-Layer Steel Material3
Slip in Roller Bearings under Hydrodynamic Contact Friction2
Effect of Severe Plastic Deformation on Wear Resistance of Sintered Al–Sn Alloys under Dry Friction Against Steel2
Tribotechnical Characteristics of Ti6Al4V Titanium Alloy–Ultra-High-Molecular-Weight Polyethylene Friction Pairs2
A Method to Account for Thermal Sensitivity and Friction Heat Resistance of Materials in Calculating Disc Brake Temperature Mode2
Influence of the Mutual Overlapping Coefficient on the Process of a Disc Brake Squealing during Braking2
Investigation of the Destruction of Lubricating Layers of Sulfonate Greases under Friction and Corrosion2
The Tribotechnical Properties of Composites Based on Different Grades of Fluoroplastic-4 and Carbon Fibers2
Wear of Diamond Composite Materials during Rock Destruction2
Frictional and Lubricating Materials with Mineral Components2
Studies on the Tribological Characteristics of Euro-Pallets on Film-Faced Plywood2
Influence of the Chemical Composition of AlCrN Coatings on Their Mechanical, Tribological, and Corrosion Characteristics2
Influence of Carbon-Containing Additives in the Composition of Copper-Based Friction Material on Boundary Friction in Mineral and Synthetic Oils2
Antifriction and Mechanical Properties of the Thermoplastic Matrix of Polyetheretherketone-Based Composites2
The Structure and Properties of a Biodegradable Grease with a Mixed Dispersion Medium and a Heterogeneous Lithium–Calcium Dispersed Phase2
Tribotechnical Properties of Nickel Based Cermet Materials2
Simulation of Micro Contact Interactions in Sliding of Solid Particles along the Radial Blades of Turbo Machines2
Phenomenological Model of Surface Forces and Contact of Rough Surfaces2
Simulation of Pavement Deformation by a Moving Load2
Friction and Wear of Asbestos-Free Brake Friction Materials2
Performance of PEEK-Based Nanocomposites at Dry Friction against Steel2
Theoretical and Experimental Study of Fatigue Failure of Contact in Carbon–Carbon Composites1
Calculation of Fit Tolerance with Clearance to Increase Relative Wear Resistance of Joints1
Antifriction Nanostructural Glass-Composite Self-Lubricating Coatings1
High-Temperature Tribotechnical Properties of Carbon–Carbon Friction Composites1
Sustainable Development and Polymer Tribology1
Elastic-Dissipative Properties of Heavy-Loaded Modified Friction Pairs1
Composition and Thickness Effect of TiAlN-Type Nanocoatings on the Strength of Their Bond with Iron: Quantum Chemical Analysis1
Increasing the Reliability of Real-Time Diagnostics of a Wear Particle Counter1
Influence of Thermal Conductivity of Steels on the Friction Limit Loads on Polyamide1
Inorganic Polymer Additive for Grease Lubricants1
Influence of Temperature and Temperature Prehistory on Frictional Characteristics of Metal Friction Pairs1
Effect of Concentration and Type of Liquid Crystal Additive on Tribological Characteristics of Industrial Oils1
Wear of Polyurethane Elastomer Containing Fluorinated Modifying Agents1
Tribotechnical and Corrosion Characteristics of Electrospark Fe–Al Aluminide Coatings on AISI 304 Stainless Steel1
Critical Sliding in Rolling Bearings under Hydrodynamic Friction Conditions1
Tribotechnical Characteristics of Solid Lubricating Coatings1
Effect of the Processing Method on the Microtopography of Rough Layers and on Oil Absorption by Friction Surfaces1
Lubricating Properties of Ammonium-Based Protolytic Ionic Liquids in Friction Pairs Based on Different Metals1
Model of Crack Initiation in a Brake Drum1
On the Temperature Dependence of the Frictional Characteristics of a Metal Contact1
Experimental Evaluation of the Tribotechnical Properties of Engine Oils for Combine Harvesters1
Surface Modification Features of Tool Steels by Laser Radiation1
Wear Resistance of Plasma Coatings Based on Self-Fluxing PG-10K-01 Alloy Strengthened by Transition Metal Borides1
A New Look at the Problem of Wear on Wheel Rolling1
Study of the Electric Resistance of Contact of Frictional Technical Surfaces by Computer-Aided Simulation1
Mathematical Modeling of Rotary Vane Compressors Taking into Account the Mutual Influence of Tribological and Operating Parameters1
Regarding the Question of Calculation of Contact Pressure in Metal-Polymer Plain Bearings during Wear1
Simulation of the Thermal Process in a Polymeric Slide Bearing with a Reciprocally Moving Shaft1
Thermoelectric Characteristics of the Process of Steel Turning by Carbide Inserts with Combined Coatings1
Selection of Geometric Parameters for Applying Strengthening Materials on the Friction Surface of Soil-Cutting Parts1
Effect of the Degree of Aluminum Doping on the Mechanical and Tribological Characteristics of Titanium–Aluminum Nitride Films1
A Method for Extracting the Surface Roughness Profile Based on Empirical Mode Decomposition1
Effect of Lubricants with Different Nature and Properties on Friction in a DLC–UHMWP Endoprosthesis Pair1
Tribological Properties of Composites Based on a UHMWPE Modified Borpolymer1
Friction in Contact between a Studded Wheel and a Solid Ice-Covered Supporting Surface1
Molecular Modeling of Frictional Fracture Kinetics of Polymer Composites Using F4K20 as an Example1
Destruction of Strain Hardened Steel Upon Abrasive Wear1
The Structural Analysis of the Formation of a Transfer Film on Surfaces of Wear of Polymer Materials1
Influence of Adhesive Properties and Surface Texture of Laminated Plywood on Rubber Friction1
Disc Brake Design with Carbon Friction Material1
Model for Calculating the Mean Temperature on the Friction Area of a Disc Brake1
Investigation of TiCrN-Coated High Speed Steel Tools Wear during Medium Density Fiberboard Milling1
Tapered Roller Bearing Rib-Roller End Interaction at Hydrodynamic Contact1
Comparison of the Influence of High-Energy Surface Treatment Methods on Friction and Wear of a 30KhGSN2A Steel (CSN 16532)–30KhGSN2A Steel (CSN 16532) Pair1
Friction Characteristic Calculations during Cylinder’s Sliding Contact over the Wavy Viscoelastic Base1
The Influence of Mechanically Activated Kaolinite and Magnesium Spinel on Tribological Properties and Structure of PTFE Friction Surfaces1
Thermal (Temperature) Principles of Compatible Friction1
Comparative Research on Wear and Erosion Resistance of Ti–Al–Ni–N and Ti–Al–Ni–Mo–N Ion-Plasma Vacuum Arc Coatings1
Tribotechnical Properties of a Copper-Based Powdered Friction Material with Addition of Titanium Powder1
Effect of Temperature and Time of Annealing on the Wear Resistance of Ni–Cr–Al-Based Pseudo-Alloy Coatings Deposited by High-Speed Metallization1
A Method to Increase the Permissible Torque of the Friction Force in Steering Units of Liquid Propellant Engines1
Development of a Three-Point Analog-to-Digital Device for Contactless Measurement of Cylindrical Channel Wear1
Tribotechnical Characteristics of Lubricant under Conditions of High Temperatures1
Durability of the “Coating–Base” Composition during Rolling Friction1
Relationship between the Tribotechnical Characteristics and the Physical and Chemical Properties of Aluminosilicates and Their Composites1
Mesomechanics of Metal-Polymeric Pairs in Friction Units under Low-Cycle Fatigue1
The Effect of Wear Resistance of Carbide Cutting Tools on the Technological Process Efficiency under Severe Cutting Conditions1
Surface Change of Carbon–Carbon Composite Materials under Friction1
Integrated Approach to Estimating the State of Rolling Bearings by Physical Methods1
Antifrictional Characteristics of Sliding Bearings from Modified Pressed Wood1
Validity of the Bearing Life Models at Rolling Contact Fatigue1
Discrete Friction Mechanisms of a Metal Tool with Polycrystalline Diamond-Coated Detail1
Wear of Quenched and Aged Cu–Be Alloy at Current Transfer1
Evaluation of the Influence of Lubricating and Cooling Agents on the Course of Dissipative Processes and Cutting of Materials1
A Study of the Wear Resistance of the Surfaces of Components via a Strengthened Combined Electromechanical Method1
Comparative Analysis of Cavitation Wear of Titanium Alloy in Fresh and Sea Water1
Prediction of Tribological Parameters for Polymer Nanocomposites1
Disc Brake with Two Thermally Insulated Friction Units with Different Frictional Properties1
0.23785495758057