OOIR: Observatory of International Research

Papers

(The TQCC of Materials Technology is 8. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)

Article	Citations
Plant-based synthesis of cerium oxide nanoparticles using Rheum turkestanicum extract and evaluation of their cytotoxicity and photocatalytic properties	88
Construction of novel ternary Au/LaFeO₃/Cu₂O composite photocatalysts for RhB degradation via photo-Fenton catalysis	88
Investigate the effects of process parameters on material properties and microstructural changes of 3D-printed specimens using fused deposition modelling (FDM)	53
Endophyte fungal isolate mediated biogenic synthesis and evaluation of biomedical applications of silver nanoparticles	39
Greener synthesis of cerium oxide nanoemulsion using pollen grains ofBrassica napusand evaluation of its antitumour and cytotoxicity properties.	35
TiO₂ nanotubes synthesised on Ti-6Al-4V ELI exhibits enhanced osteogenic activity: A potential next-generation material to be used as medical implants	31
Phase reversion-induced nanostructured austenitic alloys: an overview	29
Green synthesis of selenium nanoparticle by Abelmoschus esculentus extract and assessment of its antibacterial activity	28
Co-encapsulation of curcumin and tamoxifen in lipid-chitosan hybrid nanoparticles for cancer therapy	27
Influence of slicing parameters on surface quality and mechanical properties of 3D-printed CF/PLA composites fabricated by FDM technique	26
Synthesis and characterization of lignin-poly lactic acid film as active food packaging material	26
Biocompatibility of Ti-6Al-4V titanium alloy implants with laser microgrooved surfaces	25
Synthesis and Investigation of Fe doped SnO₂ Nanoparticles for Improved Photocatalytic Activity under Visible Light and Antibacterial performances	23
All-ceramic Li batteries based on garnet structured Li₇La₃Zr₂O₁₂	22
Machine Learning the Central Magnetic Flux Density of Superconducting Solenoids	22
Antibacterial and anti-inflammatory activities of Cassia fistula fungal broth-capped silver nanoparticles	21
A potential antibiofilm, antimicrobial and anticancer activities of chitosan capped gold nanoparticles prepared by γ–irradiation	20
Effect of thickness, bandgap, and carrier concentration on the basic parameters of Cu₂O nanostructures photovoltaics: numerical simulation study	20
Incorporation of Boswellia sacra essential oil into chitosan/TPP nanoparticles towards improved therapeutic efficiency	20
Biogenic synthesis of silver nanoparticles using marine algae Cladophora glomerata and evaluation of apoptotic effects in human colon cancer cells	19
E-beam evaporated hydrophobic metal oxide thin films as carrier transport materials for large scale perovskite solar cells	18
MXenes for antimicrobial and antiviral applications: recent advances	18
Photovoltaic and Supercapacitor performance of SnSe nanoparticles prepared through co-precipitation method	18
Band Gap Engineering and Relationship with Luminescence in Rare-Earth Elements Doped ZnO: An Overview	18
Efficient, highly stable Zn²⁺ doped NiO nanoparticles with enhanced magnetic and supercapacitor applications	18

Optimisation of conductivity of PEO/PVDF-based solid polymer electrolytes in all-solid-state Li-ion batteries	17
Biomimetic synthesis and characterisation of homogenouse gold nanoparticles and estimation of its cytotoxity against breast cancer cell line	17
Past, present and future development of microspheres for bone tissue regeneration: a review	17
Effects of cartilage acellular solubilised ECM on physicomechanical and biological properties of polycaprolactone/fibrin hybrid scaffold fabricated by 3D-printing and salt-leaching methods	17
Edible chitosan/cellulose nanofiber nanocomposite films for potential use as food packaging	16
Comparative analysis of antifungal, antioxidant and cytotoxic activities of mycosynthesized silver nanoparticles and gold nanoparticles	16
Gold nanoparticles loaded TNF-α and CALNN peptide as a drug delivery system and promising therapeutic agent for breast cancer cells	15
Synthesis, characterisation and photocatalytic activity of silver nanoparticles stabilised byPunica granatumseeds extract	15
Biocompatibility and adhesion response of magnesium-hydroxyapatite/strontium-titania (Mg-HAp/ Sr-TiO₂) bilayer coating on titanium	15
The solution plasma synthesis, characterisation, and antibacterial activities of dispersed CuO nanoparticles	15
Design of magnesium oxide nanoparticle incorporated carboxy methyl cellulose/poly vinyl alcohol composite film with novel composition for skin tissue engineering	15
A triboelectric nanogenerator based on foam for human motion posture monitoring	15
Investigation into Physical, Microstructural and Mechanical Behaviour of Titanium dioxide Nanoparticulate Reinforced Magnesium Composite	15
ZnO@NiCo-LDH core-shell nanostructures grown on carbon cloth for high-performance flexible supercapacitor electrodes	14
Antibacterial activities of zeolite/silver-graphene oxide nanocomposite in bone implants	14
Towards strength-ductility synergy in nanosheets strengthened titanium matrix composites through laser power bed fusion of MXene/Ti composite powder	14
Structural and spectral studies of Ce³⁺ doped Sr₃Y(BO₃)₃ nano phosphors prepared by combustion synthesis	14
Fabrication and physicochemical assessment of L-Histidine cross-linked PVA/CMC bio-composite membranes for antibacterial and food-packaging applications	14
Strain ageing embrittlement behaviour of X80 self-shielded flux-cored girth weld metal	14
Nickel hydroxide nanosheets grown on nickel foam for high performance supercapacitor applications	14
Justicia adhatoda L. mediated green synthesis of silver nanoparticles and assessment of their antioxidant, hydrogen peroxide sensing and optical properties	14
Microstructure and performances for 15-5 PH stainless steel fabricated through the wire-arc additive manufacturing technology	14
pH responsive metformin loaded zeolitic imidazolate framework (ZIF-8) for the treatment of lung cancer	13
A photoluminescence study of nitrogen-doped carbon quantum dots/hydroxyapatite (NCQDs/HAp) nanocomposites	13
Photochemical synthesis, investigation of optical properties and photocatalytic activity of CdTe/CdSe core/shell quantum dots	13
Enabling manufacturing of multi-axial forging-induced ultrafine-grained strong and ductile magnesium alloys: a perspective of process-structure-property paradigm	13
Antibacterial activity and biocompatibility of curcumin/TiO₂ nanotube array system on Ti6Al4V bone implants	13
pH-responsive mesoporous silica drug delivery system for targeted cancer chemotherapy	12
A recyclable triboelectric nanogenerator integrated into insole for sensing human motion	12
Rise in UV and blue emission and reduction of surface roughness due to the presence of Ag and Al in monocrystalline ZnO films grown by sol-gel spin coating	12
Facile green synthesis of silver nanoparticles from sprouted Zingiberaceae species: Spectral characterisation and its potential biological applications	12
Structural, optical and dielectric properties of Al/Mn doped ZnO nanoparticles, a comparative study	12
Laser-cladding of high entropy alloy coatings: an overview	12
Strain rate and temperature sensitivity on the flow behaviour of a duplex stainless steel during hot deformation	12
Thermally exfoliated graphene oxide reinforced polycaprolactone-based bactericidal nanocomposites for food packaging applications	12
Bio-based antibacterial packaging from decorated bagasse papers with natural rosin and synthesised GO-Ag nanoparticles	12
Synthesis and characterisation of stimuli-responsive drug delivery system using ZnFe₂O₄ and Ag_1-XZn_xFe₂O₄ nanoparticles	12
Comparison of antibacterial and cytotoxic activities of phytosynthesized ZnONPs by leaves extract of Daphne mucronata at different salt sources	12
Eco-friendly synthesis of copper nanoparticles using Mentha pulegium leaf extract: characterisation, antibacterial and cytotoxic activities	12
The loaded Ferula assa-foetida seed essential oil in Solid lipid nanoparticles (FSEO-SLN) as the strong apoptosis inducer agents in human NTERA-2 embryocarcinoma cells	12
Evaluation of physical, mechanical and biological properties of β-tri-calcium phosphate/Poly-3-hydroxybutyrate nano composite scaffold for bone tissue engineering application	12
Iron oxide nanoparticle synthesis using trigonella and tomato extracts and their antibacterial activity	12
Effect of Ni and Mo on microstructure and mechanical properties of grey cast iron	11
Investigation on dimensional accuracy, compressive strength and measured porosity of additively manufactured calcium sulphate porous bone scaffolds	11
Cerium oxide nanoparticles-loaded on chitosan for the investigation of anticancer properties	11
3D printed antimicrobial PLA constructs functionalised with zinc- coated halloysite nanotubes-Ag-chitosan oligosaccharide lactate	11
Structural, optical, cytotoxic, and anti-microbial properties of amorphous silica nanoparticles synthesised via hybrid method for biomedical applications	11
Towards lead-free all-inorganic perovskite solar cell with theoretical efficiency approaching 23%	11
Polycaprolactone/Gelatin/Hydroxyapatite nanocomposite scaffold seeded with Stem cells from human exfoliated deciduous teeth to enhance bone repair:in vitroandin vivostudies	11
Biosynthesis of Zinc Oxide nanoparticles using Origanum majorana L. leaf extract, its antioxidant and cytotoxic activities	10

Investigation of in-vitro biocompatibility and in-vivo biodegradability of AM series Mg alloys	10
Effect of Cu-N co-doping on the dielectric properties of ZnO nanoparticles	10
Investigation of vitamin D-loaded silk fibroin electrospun scaffolds for bone tissue engineering applications	10
Processing and Characterization of Hollow Glass-Filled Polyamide 12 Composites by Selective Laser Sintering Method	10
High output triboelectric nanogenerator based on scotch tape for self-powered flexible electrics	10
Effect of laser cladded co-doped strontium fluorapatite nanopowder coating on the antibacterial and cell attachment of Ti-6Al-4V implants for bone applications	10
Synergistic combination of carbon-black and graphene for 3D printable stretchable conductors	10
New perspectives and designs into nature-inspired flexible electronics: status and applications	10
Hot Tearing analysis and process optimisation of the fire face of Al-Cu alloy cylinder head based on MAGMA numerical simulation	10
Investigating photoluminescence properties of Eu³⁺ doped CaWO₄ nanoparticles via Bi³⁺ amalgamation for w-LEDs application	10
BiFeO₃ perovskite as an efficient photocatalyst synthesised by soft chemical route	10
A study on preparation of unique TiO₂/Cu₂O nanocomposite with highly efficient photocatalytic reactivity under visible-light irradiation	10
Additive manufacturing of dental root-analogue implant with desired properties	10
Polymerisation of restorative dental composites: influence on physical, mechanical and chemical properties at various setting depths	10
Facile construction of novel ZnO and TiO₂ combined g-C₃N₄ nanocomposite for superior visible-light photocatalytic organic pollutant degradation	9
Microstructural analysis and bioactive response of selectively engineered glass-ceramics in simulated body fluid	9
Bi-axial flexural strength of resin based dental composites – Influence and reliability of the testing method configuration	9
Biomimetic surfaces prepared by soft lithography and vapour deposition for hydrophobic and antibacterial performance	9
Novel magnetic composite photocatalyst ZnO/Bi₂₄O₃₁Br₁₀@SrFe₁₂O₁₉with enhanced photocatalytic activity	9
Microstructural study and mechanical characterisation of heat-treated direct metal laser sintered Ti6Al4V for biomedical applications	9
Optimum Surface Roughness for Titanium-Coated PEEK Produced by Electron Beam PVD for Orthopedic Applications	9
Biosynthesis of Cu nanoparticles using Polyalthia longifolia roots extracts for antibacterial, antioxidant and cytotoxicity applications	9
Vildagliptin-loaded gellan gum mucoadhesive beads for sustained drug delivery: design, optimisation and evaluation	9
Hybrid Ni₃N-nitrogen-doped carbon microspheres (Ni₃N@C) in situ derived from Ni-MOFs as sensitive non-enzymatic glucose sensors	9
A functional triboelectric nanogenerator based on the LiCl/PVA hydrogel for cheerleading training	8
Decavanadate-graphene oxide nanocomposite as an electrode material for electrochemical capacitor	8
Cobalt based new quaternary Heusler alloys for Spintronic and thermoelectric applications: an Ab-initio study	8
Exploring the influence of CdCl₂ on the nonlinear properties of 4–N, N–dimethylamino – 4–N–methyl – stilbazolium tosylate (DAST) crystal for optoelectronic applications	8
Antibacterial, Structural, and Mechanical Properties of MgO/ZnO Nanocomposites and its HA-Based Bio-Ceramics; Synthesized via Physio-Chemical Route for Biomedical Applications	8
In vitro degradation and apatite formation of magnesium and zinc incorporated calcium silicate prepared by sol-gel method	8
Comparative study of the effects of MAO coating and Ca-P coating on the biodegradation and biocompatibility of Mg₆₉Zn₂₇Ca₄ metal glass	8
Structural, optical, and electronic properties of barium titanate: experiment characterisation and first-principles study	8
Biocorrosion evaluation and bonding strength of HA-CS/PLA hybrid coating on micro-arc oxidised AZ91D magnesium alloy	8
A wave structure triboelectric nanogenerator for race walking motion sensing	8
Flexible and Conformal Metamaterial based Microwave Absorber for WLAN, Wi-MAX and ISM Band Applications	8
A textile-based triboelectric nanogenerator for long jump monitoring	8
Design, development, and characterisation of clofazimine-loaded mannosylated nanostructured lipid carriers: 3³-Box-Behnken design approach	8
Synthesis of Bi₄Ti₃O₁₂-BaTiO₃ nanocomposite, manifesting high dielectric and unique magnetic nature applicable in heterogeneous photocatalytic activity for	8
Beetle wing inspired fabrication of nanojunction based biomimetic SERS substrates for sensitive detection of analytes	8
In vitro degradation and mechanical behaviour of calcium phosphate coated Mg-Ca alloy	8
A self-powered grip exerciser based on triboelectric nanogenerator for intelligent sports monitoring	8
Eco-friendly synthesis of silver nanoparticles and its biological evaluation using Tamarix aphylla leaves extract	8
Structural and functional properties of rare earth-based (NiO-CGO) nanocomposite produced by effective multiple doping approach via co-precipitation	8
Green synthesis of Ag doped ZnO nanoparticles: study of their structural, optical, thermal and antibacterial properties	8
A flexible triboelectric nanogenerator based on soft foam for rehabilitation monitor after foot surgery	8
Microstructure and Properties of Cold Spraying AlCoCrCuFeNix HEA Coatings Synthesized by Induction Remelting	8
Linear acenaphthene-imide-fused pyrazinacene-quinone: synthesis and photophysical properties	8
Effect on optical and structural parameters in heavy Ca-doped ZnO nanostructures	8
Synthesis of iron oxide nanoparticles by mixing chilli with rust iron extract to examine antibacterial activity	8