OOIR: Observatory of International Research

Papers

(The median citation count of Materials Technology is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-06-01 to 2026-06-01.)

Article	Citations
C-phycocyanin-based nanoplatform as a photosensitiser for targeted photodynamic-mediated cell death	192
Mannose-functionalized CeO₂ nanoparticles for synergistic ROS scavenging and immunomodulation in nephritis therapy	75
Effect of volume ratios on the novel Solanum lycopersicum leaf extract-mediated production of ZnO and Co ₃ O ₄	56
Photocatalytic activation of PMS over magnetic s-scheme heterojunction photocatalyst Co ₃ O	43
Revolutionizing tissue engineering: integrating 3D bioprinting and additive manufacturing for precision scaffold design and biomimetic tissue regeneration	36
Effect of annealing on structural and optical properties of copper sulphide thin films	33
Influence of N ₂ flow rate on the structure, hardness, and bioactivity of TiN/Cu coatings on NiTi alloy by RF magnetron sputtering	33
Effect of metalloid element on the microstructural and mechanical properties of AlCoCrCuFeNi high-entropy alloys	32
Characterisation and prediction of mechanical properties in laser powder bed fusion-printed parts: a comparative analysis using machine learning	31
A dual-nano drug system capable of potential interference and free radical scavenging to treat bacterial nephritis	30
Advanced materials for flexible electronics	30
Influence of Fe content and Cl⁻ concentration on the microstructure and electrochemical properties of Al-8Si-xFe coating alloys	28
Engineering a skin-mimicking asymmetric poly(L-lactic acid/gelatin bioscaffold for skin repair	28
Preparation of NO-Releasing electrospun chitosan nanofibrous scaffolds for osteoconduction	28
Structure, morphological, frequency-dependent electrical and enhanced dielectric properties of multilayers ceramic prepared from Sr-doped BaTiO ₃	27
High performance flexible piezoelectric nanogenerator based on Bi-doped BaTiO ₃ /polyimide composite films	25
Significant impact of co-doping Eu-doped ZnO nanoparticles with Li on structural–optical properties relationship	24
Carbon coated “zero-strain” Li ₂ TiSiO ₅ nanowires for high-performance lithium storage	23
In vivo biodegradation and biological properties of a Mg-Zn-Ca amorphous alloy for bone defect repair	23
Surface engineering of MOFs-derived Co ₃ O ₄ nanosheets for high-performance supercapacitor	23
Enhancing anticancer efficacy: xovoltib-loaded chitosan-tripolyphosphate nanoparticles for targeted drug delivery against MCF-7 breast cancer cells	22
Enhancement of oxygen-deficient mediated oxidative stress by zinc-doped vanadium oxides against Candida albicans	22
Exploring the inhibition effect of tri-sodium phosphate concentrations on corrosion in Mg-sn-ca-mn anode for magnesium batteries	22
Fabrication of drugs loaded UiO-66 nanoparticles loaded core-shell nanofibers: investigation of antiproliferative activity and apoptosis induction in lung cancer cells	20
Current advancements in the development of bionic organs using regenerative medicine and 3D tissue engineering	20

Magneto-acoustic sensing via ternary phononic crystal-engineered wave control	18
X-ray computed tomography and simultaneous multi-signal detection for evaluation of thermal runaway of lithium-ion battery	18
Faster photoswitching and amplified NBE emission from mg doped sol-gel derived ZnO thin films	17
Enhancing corrosion and wear resistance of Mg coating on titanium implants by micro-arc oxidation and heat treatment	17
DLP-printed bio-based mini-channel filters for water filtration: influence of channel size and surface quality on mechanical and filtration performance	17
Phase structure regulation and enhanced Curie temperature of (K,Na)NbO ₃ -based piezoelectric ceramics	16
Molecular dynamics study on the dislocation evolution mechanism of temperature effect in nano indentation of FeCoCrCuNi high-entropy alloy	16
Ecofriendly bio-synthesis and spectral characterization of copper nanoparticles using fruit extract of Pedalium murex L.: in vitro evaluat	16
Bird’s nest-like Nb ₂ O ₅ : preparation, characterization and multifunctional photocatalytic application	16
Novel hydrazine hydrate sensor based on”fish-bait” capture mode	15
Towards strength-ductility synergy in nanosheets strengthened titanium matrix composites through laser power bed fusion of MXene/Ti composite powder	15
The effects of boron trioxide on the structure and degradation behaviour of borosilicate bioactive glass	15
Molecular dynamics study on dynamic mechanical behaviour of FeCoCrCuNi high entropy alloy	14
Zn coating thickness effects on mechanical properties and microstructure in spot-welded Mg/steel joints	14
An In Vitro study of phase transformation and mechanical performance of thermally processed nickel-titanium alloy	13
Eco-friendly green synthesis of copper nanoparticles from Tinospora cordifolia leaves: optical properties with biological evaluation of anti-microbial, anti-inflammatory	13
Hydrogen-centric energy storage and conversion systems for sustainable power applications	12
Thermoelectric transport properties of semiconductor film-based epitaxial monolayer graphene	12
Stephania abyssinica root extract in the synthesis of silver nanoparticles and evaluating its antibacterial effect	12
Synergic fabrication of arsenic and anticancer drug-loaded ZIF-8 nanocomposites for improved radiofrequency ablation of liver metastasis cancer therapy	12
An approach to mass produce peppermint oil-sodium alginate composite microcapsules by drop-on-demand system loaded with stabilized nanoemulsion	11
Effects of silver nanoparticle/graphene oxide composite on the properties of polymethyl methacrylate base material in vitro	11
Significant influence of heat input on microstructure evolution and mechanical properties of the simulated CGHAZ in a 1000 MPa grade ultra-high strength steel	11
3D-printed endovascular scaffold loaded with miR-199a-5p promotes the functional repair of atherosclerosis	11
Unveiling the potential of PVDF@LaFeO ₃ based flexible composite films towards high performance broad band EMI shielding	11
Temperature effect on magnetic characteristics of Fe-Cr-Co-Si alloy specimens processed by thermomagnetic treatments	11
Corrosion and in vitro mechanical behaviour of additively manufactured 316L stainless steel for biomedical application	11
Synthesis and supercapacitor performance studies of graphene oxide based ternary composite	11
Biopolymer-coated magnesium-alloy-based multi-functional bio-nanocomposite scaffolds	11
Arrhenius constitutive equation and artificial neural network model of flow stress in hot deformation of offshore steel with high strength and toughness	11
Osseointegration of an innovative functionally gradient biomimetic scaffold based on Voronoi-Tessellation for the design of orthopaedic implants	11
Development and characterisation of sugarcane bagasse nanocellulose/ PLA composites	10
The global contribution of crystal boundaries and bio-physical characteristics in the understanding of cellular interaction of fibroblasts with the nanoscale surface	9
Pure and co-doped Zno/Sno ₂ nanostructured thin films: analysis of doping on methylene blue decolorization	9
Photoluminescence, morphology and band gap in Europium-doped ZnS nanoparticles	9
Feasibility study on high-energy-density almost-solid-state sodium batteries with thin ceramic Na _3.4 Zr ₂	9
Bacterial adhesion and fibroblast compatibility properties of anodic oxide modified Ti6AL4V abutments	9
One-pot hydrothermal synthesis and characterization of 2D MoS ₂ -based heterostructure for enhanced hydrogen evolution reaction	9
Effects of secondary carbide addition on the mechanical properties of (Ti _1-x TM _x )C-based 20Ni cermets (TM = V, Mo, and W): a st	9
Effects of aluminium content on microstructure evolution and strength–ductility–toughness synergy of NiAl-strengthened steels processed by intercritical heat treatment	9
Ultrasonic Nano emulsification of Apricot Kernel Oil and Its Therapeutics Effects on Suppression of Human Lung Cancer Cells (A549)	9
A convergent synthetic platform of hydrogels enclosing prednisolone-loaded nanoparticles for the treatment of chronic actinic dermatitis	9
Synthesis and piezocatalytic performance of β-BaTi ₂ O ₅ nanorods by hydrothermal method from drie	9
Absorption-dominant shielding effectiveness of carbon-based nanocomposites with enhanced dielectric and magnetic losses	8
Long-acting in situ forming implants for sustained dexamethasone delivery	8
Aluminium alloys process optimization in laser powder bed fusion using machine-learning algorithms	8
Magnetic transitions, exchange bias in Eu-doped TmFeO ₃ single crystals	8
Strain ageing embrittlement behaviour of X80 self-shielded flux-cored girth weld metal	8
Melothria maderaspatana mediated one-pot synthesis of cerium-doped Silymarin nanoparticles and their antibacterial and anticancer studies	8
Effect of grain morphology and ion diffusion on the dielectric properties of ferroelectric-dielectric composite ceramics	7

Role of infill pattern and density on strength of 3D printed shape memory alloy hybrid composites	7
Study on superplastic behaviour of cold rolled Inconel 718 alloy with δ phase dispersion distribution	7
Microstructural and dielectric properties of Mo-doped barium strontium titanate nanopowders	7
Effect of annealing temperature on the microstructure evolution and mechanical properties of lightweight medium-Mn steels and hydrogen embrittlement susceptibility	7
Polymethyl methacrylate/akermanite/graphene oxide nanocomposite bone cement: fabrication, mechanical properties and biocompatibility	7
Electrospun borneol/PVP antibacterial coating for postoperative management of keratoprosthesis implantation	7
Synthesis, characterisation and in vivo wound healing activity of chemogenic sulphur nanoparticles	7
Understanding microstructural evolution during three-axial thermo-mechanical processing involving severe plastic deformation of magnesium alloys	7
Correction	6
Solubility enhancement and controlled release of anti-viral drug ribavirin via modified β-cyclodextrin inclusion complex nanofibers: experimental and molecular docking studies	6
Green synthesis of silver nanoparticles using Lagerstroemia speciosa fruit extract: catalytic efficiency in dye degradation	6
Discontinuous transformation-induced plasticity behaviour in governing the mechanical behaviour in medium-Mn steels	6
Advanced brain tumour detection using a hybrid 2D material metasurface sensor with machine learning-enhanced performance	6
Achieving excellent strength and ductility synergy by δ phase strengthening in low-density high-manganese steel	6
Bend Induced Magnetic Bistability in Amorphous Microwires	6
Exploring the physicochemical properties and antifungal activity of zinc oxide nanoparticles	6
GLP-1R agonist alleviate obesity and NAFLD by upregulates OTR to activating MAPK/ERK signalling pathway in liver through the brain–liver axis	6
Hierarchical NiCo ₂ @PEDOT/PMo ₁₂ core and shell architectures for high-performance supercapacitors	6
New composite-structured high-entropy alloys designed based on the mixing enthalpy and valence electron concentration	6
Mechanical performance of ABS/CNT nanocomposites developed by fused deposition modelling	6
A dual-targeted nanoplatform with miR-155 inhibition and ROS clearance abilities for chronic nephritis therapy	6
Enhanced efficiency of thin-film solar cells using AgInSe₂ back surface field layer: a SCAPS-1D numerical study	5
Photocatalytic performance of silver-doped titanium dioxide (TiO₂) nanoparticles for environmental applications	5
A first-principle study of the effect of yttrium on the oxidation resistance of FeCrAl alloys	5
Fabrication and development of biogenic selenium nanoparticles incorporated alginate hydrogel wound care material: a pre-clinical study	5
Supercritical hydrothermal synthesis of ultra-fine Cu powders	5
Influence of annealing temperature of seed layer on the structural and optical properties of ZnO nanorods synthesized by SILAR and CBD techniques	5
Bio fabrication of Fe ₂ O ₃ NPs and their analgesia efficiency for post-operative epidural anaesthetic applications- study of chro	5
Effect of ionic liquid as corrosion inhibitor for 6061 aluminium alloy- (electrochemical and quantum chemical approaches)	5
Machine-learning-assisted multilayer graphene–silver–ZrN surface plasmon resonance biosensor for high-sensitivity hemoglobin detection	5
Perovskite-based catalysts for environmental detoxification: mechanistic insights into polycyclic aromatic hydrocarbon removal and performance constraints	5
Optimised quasi-periodic phononic crystal architectures for high-sensitivity magneto-acoustic field detection	5
A dual approach by nanostructured rutin-titanium oxide complexes against dental pathogen biofilms and oral cancer via apoptosis gene modulation	5
Machine-learning-assisted validation of a graphene-based terahertz metasurface for simulated hemoglobin sensing	5
Green synthesis and characterisation of silver nanoparticles from leaf and bark extract of Croton macrostachyus for antibacterial activity	5
MWCNT attached mesoporousAg ₃ O ₄ @NiO nanocomposite for hybrid supercapacitor applications	5
Machine learning-assisted pattern recognition algorithms for estimating ultimate tensile strength in fused deposition modelled polylactic acid specimens	5
Tribo-mechanical and vibrational performance of thermally sprayed alumina–titania composite coatings for structural applications	5
The effect of SiO ₂ /LiO ₂ ratio on the mechanical and biological properties of lithium metasilicate glass ceramic	5
Innovative transdermal doxorubicin patches prepared using greenly synthesized iron oxide nanoparticles for breast cancer treatment	5
Biocompatibility vs antibacterial activity: chitosan-mediated nanosilver/PCL/gelatin nanofibers	5
Improved bioactivity and corrosion resistance of NbO containing plasma electrolytic oxidation coating on ZM21 Mg alloy	5
Eco-friendly synthesis of silver nanoparticles from rubber fig leaves and their application in the catalytic degradation of Congo Red dye	5
The triboelectric sensor based on PDMS/SGO for human running posture and physical fitness health monitoring	5
The effect of reaction temperature on structural and morphological properties of Mn ₂ O ₃ nanoparticles and its application of ele	4
Advances in 3D-printed hierarchical scaffolds for load-bearing bone reconstruction: bridging the gap between traditional approaches and next-generation tissue engineering approaches	4
In situ grown carbon nanotube-Fe ₃ O ₄ -dicalcium phosphate dehydrate composite coating on carbon fibres for bo	4
Unraveling carbon dot–deoxyribonucleic acid interactions: binding modes, conjugation strategies and applications in Förster resonance energy transfer	4
Tailoring porosity of starch-derived biocarbon for enhanced supercapacitor performance	4
Liangying Qingqi decoction prevented radiation induced oropharyngeal mucositis through focal adhesion signalling pathway	4
Novel magnetic photocatalyst Fe ₃ O ₄ /AgSbO ₃	4
Anti-cancer effects of PLGA nanoparticles loaded with anbarnesa smoke organic extract on A2780 ovarian cancer cell line	4
Tailored microstructure and superior dielectric response in Nb _y Ti _1-y O	4
Biological membrane-coated hollow cerium oxide nanoparticles-mediated co-delivery of DOX and ICG for the treatment of triple-negative breast cancer	4
Laser-induced in-plane curving of ripples on biomedical stainless steel and their relationship to biological functions	4
Band Gap Engineering and Relationship with Luminescence in Rare-Earth Elements Doped ZnO: An Overview	4
Effect of the Juglans Regia (Walnut) leaf extract concentration on the biosynthesis of ZnO nanoparticles: Characterisation and antimicrobial activity	4
A type of brain-targeting nano-formulation and its anti-tumour effect in paediatric brain tumour cells	4
Enhancing mechanical performance of MWCNT filler with jute/kenaf/glass composite: a statistical optimization study using RSM and ANN	4
Biomechanical analysis of 3D printed porous extremely-low modulus Ti-24Nb-4Zr-8Sn lumbar interbody fusion cage-A finite element study	4