Journal of Mining Science

Papers
(The median citation count of Journal of Mining Science is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)
ArticleCitations
Fractures as Stress Raisers in Rock Mass in Oil and Gas Production32
Modeling Effects of Gravity on Gas Drainage in Methane-Containing Coal Seams10
Crushed Rock Strength Testing at Iron Ridge Deposit9
Process Flow Charts and Recommendations for Processing of Bauxite with Increased Contents of Iron and Fine Particles of Valuable Components9
A Novel Rate of Penetration Prediction Model for Large Diameter Drilling: An Approach Based on TBM and RBM Applications9
Estimating Energy Consumption of Mine Fans in Underground Mines in Case of Uncertainty of Fan Influence Zones8
Some Practical Aspects of Automatic Regulation and Control of Quartz Sand Preparation Process to Obtain Quality Products7
High-Speed Railway Tunnel Bottom in Nearly Horizontally Soft and Hard Interlayered Strata: Deformation Mechanism and Countermeasures7
Applicability of the Suspension Effect in Estimation of Influence Exerted by Ionic Composition of Flotation Pulp on Apatite Surface7
Loss of Load-Bearing Capacity in Sand Base of Heavy Column and in Plate Buried in Granular Medium under Multiple Weak Impacts7
Influence of Strong Electromagnetic Pulses on Efficiency of Disintegration and Magnetic Separation of Ferruginous Quartzite7
Axial–Torsional Vibrations of Drill Strings with Crush-and-Shear Hybrid Bits at Constant Tension of Suspension Cables6
Impact of Increased Water Inflow on Main Drainage System Efficiency in Mine6
Support and Stabilization of Temporary Roadways in Extraction of Coal Measures in Kuzbass6
Interpretation of Computer Vision Models in Mapping of Opencast Mining Sites: Overview6
Bio-System Concept of Technological Innovation in Mining with Implementation of Ecological Imperative6
Physical Modeling of Temperature Field Dynamics at Coal Waste Dumps in Donbas6
Estimate of Energy Characteristics of Electromagnetic Vibration Exciter5
Selectivity of Calcium-Bearing Mineral Flotation with Oxyhydryl Collector5
Wastewater Reuse in Open Pit Coal Mines5
Determining Modes of Thiol Collector Attachment at Sulfide Minerals by Optical, Electron Scanning and Laser Microscopy5
The Networking Method as a Tool for Prediction of Failures of Open Pit Mine Trucks5
Optimization Analysis of Medium- to Long-Term Ore Drawing Schedule Based on MIP in Block Cave Mining5
Integrated Approach to Remote Monitoring of Waterworks Facilities in the Mining Industry Using Space and Digital Technologies5
Effect of Kaolin and Basalt Composition on Geopolymer Characteristics5
Rapid Testing of Rock Crushability Using Hardness Meter5
Stability Analysis of Pillars in Underground Limestone Mine Using Three-Dimensional Scanning Techniques5
Recovery Dynamics of Mining-Altered Natural Ecosystems by Satellite Data4
Time Series Forecasting of Indian Coal Mines Fatal Accidents4
Selection of Reagents–Regulators for Enhancing Efficiency in Correction of Spectral–Kinetic Characteristics of Diamonds by Luminophore-Bearing Compositions4
Modeling Destructive Effect of Blastholes in Perimeter Control Blasting4
Justification of Extraction of Ore Reserves under Bottom and in Pitwall Rock Mass Using Cut-and-Fill Method in Transition from Open Pit to Underground Mining in the Artemevsky Mine4
Insulating Property of Loam to Prevent Spontaneous Combustion of Coal and Carbonaceous Rocks4
Change in Permeability in Fault Zones under Impact of Seismic Waves Induced by Massive Blasts4
Trigger Effect in Impact Fracture of Granite Sample under Uniaxial Compression4
The Low-Temperature Plasma Effect of Dielectric Barrier Discharge on Physicochemical and Process Properties of Natural Iron Sulfides4
Properties of Gold-Bearing Humic Acids4
Design of High Speed Rotors for Axial Mine Fans4
Investigating the Usability of Pyrotechnic Rock Breaker Materials in Natural Stone Quarrying4
A CNN–LSTM and PSO–GRNN Prediction of the Rockburst Risk Level Based on the Data from the Combination of Microseismic Monitoring Variables with Electromagnetic Radiation Signals4
Assessment of Kinetic Characteristics for Coalbed Gas from Thermodynamic Measurements in Sealed Canister with Coal Chippings4
Swelling Behavior of Sand–Bentonite Mixtures4
Investigation of the Effective Parameters of Travertine Stones Healing Using Bio-Grouting4
Reconstruction of Paleostresses in the West of Sakhalin from Tectonophysical Research Findings4
Effect of Inter-Hole Delays on Seismic Safety with Regard to Firing Time Deviation4
Stimulation of Separation of Difficult Diamond-Bearing Raw Materials from Primary, Placer and Manmade Deposits4
Ilyushin’s Trace of Delay in Complex Loading of Granular Media with Continuous Rotation of Principal Axes of Strains4
Testing of Hydraulic Hammering Tool with Restrictive Control of Energy and Frequency of Blows4
Effect of Geothermal Gradient on Stress State of Rock Mass during Coal Mining3
Subsidence Analysis for Old Abandoned Board and Pillar Coal Mines Using ANSYS and Monte Carlo Simulation3
Modeling of Knelson Concentrator Operating Parameters by Using Application of Box–Behnken Experimental Design for Chromite Ore3
Justification for the Use of Interaction Parameter in Selection of Combination of Flotation Reagents3
Preparability of Iron Ore from Yakovlevo Deposit, Kursk Magnetic Anomaly, Using Coarse Particle Separation Methods3
Effective Model of Flow in Heterogeneous Confined Aquifers3
Numerical Modeling of Dust-and-Air Flow in Air Filtering System in Subway Tunnel Ventilation3
Activation of Karstification under Induced Impacts at the Tyubegatan Potash Deposit3
Ground Surface Movements and Deformations at Almaz-Zhemchuzhina Deposit from Surveying Techniques3
Chemisorption and Physisorption of Collector and Composition of Collectors in Froth Flotation3
Mass Transfer in Upward Percolation of Water Solutions in Tailings3
Automated Planning of Underground Mining Operations with Regard to Geological and Geotechnical Constraints3
Physical Simulation of Penetration of V-Shaped Indenter in Rocks in Static and Dynamic Tests3
Implementation of the Blast Design and Pattern Adaptation Method at Structurally Complex Deposit3
Geomechanical Behavior of Undermined Rock Mass in Blind Orebody Mining in Tashtagol Field3
Evolution Mechanism and Monitoring Technology of Overburden Deformation in Underground Mining with Grout Injection3
Modeling Percussion and Rotary Percussion Drilling in Strong Rocks3
Sublevel Stoping with Cemented Paste Backfill in Weak Rock Mass Zones3
Interpretation of Composite Seismic Signals in Deep Mines in the Donbas3
Application of New Dithiazine-Class Complexing Agent in Galena and Sphalerite Separation in Flotation3
The Use of Geospatial Data in the Industrially Disturbed Land Evaluation3
Prevention and Control of Coalburst in Tunnels Using Gantry Energy-Absorbing Hydraulic Support3
Interface Structures and Strength Characteristics of Coal Freezing Adhesion on Transportation Equipment in Cold Regions3
Ecological and Geochemical Assessment of Manmade Water Bodies at Transbaikal Mines3
Estimation Methods of Dynamic Strength of Rocks3
Experimental Research of Mudcake Formation on Low-Permeable Sandstone Samples3
Influence of Flow Process Parameters on Physical and Mechanical Characteristics of Granular Materials Containing Coal3
Laser Scanning Monitoring of Deformations in Concrete Lining of Mine Shafts3
Backfill Technologies and Designs for Deep-Level Sylvinite Mining3
A Preliminary Investigation of the Operating Variables in a Laboratory Knelson Concentrator for Enrichment of Chromite Ore3
Mining Conditions at Man-Made Gold Placers in Yakutia’s Arctic Zone3
Formation Mechanism of High-Cold and High-Altitude Landslide Disasters Caused by Complex Goaf Groups3
Change in Properties and Composition of Old Loparite Ore Mill Tailings Depending on Depth of Burial3
Substitution of Low-Calcium Fly Ash for Partial Portland Cement in Underground Backfilling Mining3
Soft Rock Reinforcement by Bicomponent Organomineral Resin Injection3
In-Situ Stress Prediction Model for Tight Sandstone Based on XGBoost Algorithm3
Modified FEM Algorithm with Introduced Elastic Blocks for Geomechanical Modeling of Undermined Rock Mass3
Analysis of Reagent Regimes in Nepheline Concentrate Production from Loparite Ore Processing Tailings by Flotation2
Investigation of Properties of Domestic Binders for Dust Suppression at Tailings Storage Facilities2
Clustering in Granular Medium in Biaxial Compression2
Seismic and Hydrogeological Monitoring of Large-Scale Blast Parameters: A Case-Study of Lebedinsky Open Pit Mine, Kursk Magnetic Anomaly2
Mechanical Properties of Shotcrete Produced with Recycled Aggregates from Construction Wastes2
Influence of Contact Time between Buttons of Roller Bits and Rock on Indicators of Rock Fracture2
Usability of Chloride Mine Water in Preparing Cemented Paste Backfill2
Estimating Thickness of Defects at Rock-Concrete Lining Interface by Ground-Penetrating Radar2
Rational Modes of Inertial Impact Fracture of Rocks2
Engineering Geological Block Model as an Informational Framework for Digital Management in Mining2
Selecting Organic Collectors for Luminophore-Bearing Modifying Agents to Extract Weakly Fluorescent Diamonds2
Delimitation of Displacement Zones in Cut-and-Fill Mining of Kimberlite Deposits Using Cemented Paste Backfill2
Rock Mass Condition Assessment Using InSAR and Numerical Modeling2
Reliability Assessment of Cross-Sector Model Diagnostics in the Case of Mining and Energy Complex after the Emergency Situation2
Prediction of Magnetic Hydrocyclonage Performance in Suspensions2
Geomechanical Analysis of Mining System Parameters in Sublevel Caving of Close-Spaced Ore Bodies2
Multilevel Model of Cleavage Fracture in Brittle Rocks in Compression2
Justification of Shrinkage Stoping Parameters for Thin Ore Bodies in Gravitational Stress Field2
Modification of Diamond Spectrum Pattern Using Luminophore-Containing Agents with Zinc and Cadmium Chalcogenides2
Determination of Rock Mass Structure near Tunnel by Phase Velocities of Seismic Surface Waves2
Geomechanical Substantiation of Technology Parameters for Extraction of Mineral Reserves under Open Pit Bottom at Steeply Dipping Ore Bodies of Small and Medium Thickness2
Determination of Informative Frequency Range in Seismic Noise in the Method of Remote Appraisal of Hydrocarbon Reservoirs2
Use of AFE Rectifier with Chopper Control for Performance Enhancement of Mine Dragline2
Loading of Diamond Wire Saw of Stone Cutting Machine2
EXPERIMENTAL DETERMINATION OF DISSIPATION FACTOR IN ROCK SAMPLES OF DIFFERENT TYPES AND GENESIS2
Deformation of Strong Overburden Rocks in Dams and Overburden Dumps during Operation of Transport Machines2
Processing of Complex Ore Mill Tailings with Estimation of Contribution of Native Microflora2
Influence of Spatial Orientation of Initiator-Notch on Roof Rock Deformation near Production Face in Directional Hydraulic Fracturing2
Application of Neural Networks in Rock Mass Stress Assessment by Photoelasticity2
Peculiarities and Efficiency of Support and Protection of Mine Excavations in Potassium Salt Rock Masses at Great Depths2
Lab Simulation of Gravity Ore Flow in Caving Systems of Mining2
Bench Testing of Borehole Electromagnetic Impulsive Source of Vibrations2
Feasibility of Acoustic Diagnostics of Fire Sources in Coal Seams2
Effect of Discontinuities on Elastic Wave Velocities in High-Stress Rock Samples: Experimental Research Using Ultrasonic Interferometry2
Estimation of Specific Cutting Energy and Noise Level in Circular Saw Cutting Process by Leeb, Shore and Schmidt Hardness Values of Rocks2
Potential of Milky Quartz from the Larino Deposit in the Southern Urals in Production of High-Purity Quartz Concentrates2
Subsidence Analysis for Old Abandoned Board and Pillar Coal Mines Using ANSYS and Monte Carlo Simulation2
Propagation of Elastic Vibrations and Generation of Microseismic Emission in Loaded Rocks Samples under Dynamic Impact2
Effect of Surfactants on Specific Fracture Energy of Carbonate Rocks at Different Temperatures2
Modeling Arching of Rocks in Top Coal Caving in Thick and Gently Dipping Coal Seams2
Effect of Loading Conditions on Dynamic Fracture Tendency in Rocks2
Prediction of Rock Fragmentation in Bench Blasting Operations Based on Multi Parameters—A Case Study2
Modification of Properties of High Luminous Diamonds with Luminophore-Bearing Compositions towards Enhanced Selectivity of X-Ray Luminescence Separation2
Procedure for Combining Collectors Toward Their Synergetic Effect Production in Flotation2
Effect of Temperature on Physico-Mechanical Properties of Chunar Sandstone, Mirzapur, U.P., India2
Numerical Modeling of Hydraulic Fracture and Permeable Crack Interaction Nearby a Void2
Collectability and Selectivty of Frothers in Flotation2
Physical and Mechanical Properties of Ore and Rocks after Flooding2
Effect of Modified Polyvinyl Caprolactam on Gold Recovery from Fine Slime in Gold Ore Flotation2
Topicality of the Framework and General Theory for Safe Deep-Level Mining of Hydrocarbon-Bearing Formations2
Transient Processes in Formation of Geotechnical Systems in Deep Open Pit Mines: Methodical Aspects2
Processibility of Fine-Grained Magnetite–Apatite Ore Mill Tailings at Kovdor Deposit2
The Application of Shortwave Band GPR in Investigation of Surrounding Rock-and-Lining Interface2
Geomechanical Assessment of Slope Stability in Open Pits in Transbaikalia2
Thermal Stress State in the Vicinity of Underground Roadways2
Mass Transfer of Base Metals in Upward Penetration of Solutions in Tailing Dumps2
Investigation and Design of Hydropercussion Mechanisms for Operative Attachments of Mining Machines1
Mineralogical Features Associated with Material Constitution and Process Properties of Difficult Lead–Zinc Ore1
Recovery of Rare Alkali Elements from Hydromineral Resources by Zeolite-Bearing Rocks-Based Adsorbents1
Sulfidation of Oxidized Lead and Zinc with Pyrite-Bearing Lead-and-Zinc Ore1
An Automatic Control Algorithm for Air Flow Rate at a Subway Station Platform under the Impact of Piston Effect1
Interrelation of Mechanical Properties and Root Damage of Salix with Ground Surface Subsidence1
Induced Seismicity in Gornaya Shoria1
Shape of Hammers of Hammer Rotors for Inertial Impact Fracture1
Procedure to Determine Strength of Rocks with Regard to Their Rheological Alteration1
Two Concepts of Continuum Deformation Kinematics: Displacement Field of Points and Displacement Fields of Material Planes1
Development of Seismic Activity Zones in Undermined Rock Mass in Hybrid Opencast/Underground Mining in Kirovsk Mine1
Process Solutions for Sand Production Control in Oil and Gas Wells1
Heterogeneity Location in Neighborhood of Underground Mine Workings by Phase Velocity of Surface Seismic Wave1
Influence of Thickness of Pillar between Haulage and Undercutting Levels on Stability of Development Drifts1
Full-Scale Testing of Electromagnetic Radiation Recorder in Rocks during Coal Mining1
Stress Concentration in Wellbore Zones at Underground Gas Storages1
Activation of Seismo-Acoustic Events after Large-Scale Blasting at an Iron Ore Body of the Kursk Magnetic Anomaly1
The Parameter Sensitivity Analysis of Force Chain Evolution in the Flow of Loose Ore Rock under an Isolation Layer1
Geomechanical Justification of Ground Control Method Using Pillars and Roof Caving in Mining Inclined Thin and Medium-Thick Orebodies1
Methodological Approach to Studying Structural and Mechanical Properties of Suspension of Magnetite Nanoparticles in Dispersion1
Kentobe Pitwall Stability Estimation Using a Digital Geological-Geomechanical Model1
Hydrochemical Mass Transport of Gold by Humic Compounds in Hypergenesis1
Stress–Strain Analysis of Rock Mass–Support System in Complex Geomechanical Conditions of the Almaz-Zhemchuzhina Deposit of Chromite Ore1
Using Surface Waves for Monitoring Rock Mass Condition around Underground Openings and Structures1
Experimental Validation of Influence Exerted by Characteristics of Dry Magnetic Separation Feed on the Process Efficiency1
Analysis of Bending Vibrations of Rotors in Axial Mine Fans with Two Impellers1
Formation of Underspoil Water Composition at Copper–Pyrite Deposit in the Middle Urals1
Solid Mineral Mining at High Wet Deposits1
Measurement Equipment for Laboratory Research of Hydraulic Fracturing1
Electromagnetic Emission Associated with Fracture of Rock Samples1
Influence of Low-Temperature Dielectric Barrier Discharge Plasma on Physicochemical Properties and Flotability of Minerals Present in Ferruginous Quartzite1
Correlation of Schmidt Hammer Rebound Number and Point Load Index with Compressive Strength of Sedimentary, Igneous and Metamorphic Rocks1
Freeze–Thaw Effect on Permeability of Polyurethane-Reinforced Sand in Uniform Triaxial Compression1
Application of Electrohydraulic Effect to Reduce Losses of Standard-Quality Ferrosilicon in Dense Medium Separation Tailings1
Seismic Hazard Assessment in Rock Mass during Complex Deposit Mining in Difficult Hydrogeological Conditions1
Monitoring of Roof Subsidence Based on Manmade Acoustic Signal Properties1
Theory of Flocculation of Mineral Suspensions: Current Situation1
Permeability of Coal Cores with a Drainage Fracture with a Monolayer of Proppant1
Geomechanical Behavior of Rock Mass in the Vicinity of Deep-Set Underground Openings at Potash Deposits1
Acoustic Characteristics of Rock Samples under Negative Temperatures1
A Method of Obtaining SWCC Based on Conventional Geotechnical Test1
Continuous-Action Multiplier Engineering1
Influence of Cutting Process and Cutting Tool Parameters on Loads in Cutting Hard Inclusions in Coal1
Phenomenological Model for Evaluation of Slope Stability for Overburden Rock Dumps1
Assessment of Change in Rock Mass Permeability in the Vicinity of Underground Explosion from Experimental Data and Numerical Modeling1
Functionalized Magnetic Nanosorbents for Copper Extraction from Solutions1
Determination of Viscosity of Granular Materials from Uniaxial Compression Test Data1
Experimental Study on Influence of Loading Rate on Brittleness Indexes of Marble1
Mining Recirculated and Waste Water Treatment Using Adsorbents Made of Zeolite-Bearing Rocks from the Khola Deposit1
Multi-Attribute Ranking of Entities for Limestone Supply under the Conditions of Variable Thermal Power Complex Structure1
An Artificial Neural Network Approach to Predict the Performance of Tunnel Boring Machines: A Case Study of Water Conveyance Tunnels in Iran1
Abrasiveness Assessment of Geomaterials by Parameters of Acoustic Emission in Disintegration1
Shapes of Hydraulic Fractures in the Vicinity of Borehole-and-Branch Hole Junction1
Coal Industry of Eastern Russia: Current Situation and Development Trends1
Prediction of Drillability of Sedimentary Rocks1
System-Based Identification and Formalization of Flow- and Diffusion-Type Mass Transfer Processes During Gas Drainage in Coal Seams1
Open Pit Mine Slope Stability: Methodological Framework1
Study on Beneficiation Technology for Rational Utilization of Low-Grade Copper Nickel Symbiotic Ore1
Operation Factors of Pneumatic Hammer with Reduced Volume Front Chamber1
Effect of Operating Parameters on Flotation Performance for Recovering High-Grade Monazite from a Partially Upgraded Placer Deposit1
Effect of the Velocity of Rotation on the Constitutive Equations for Geomedia1
Reclamation of Waste Storage Sites of the Mining Industry in the Russian Federation1
Mass-Transfer in Rock Mass with Contrasting Permeability: Theory and Laboratory Experiment1
Specific Energy Analysis of Drilling for Optimizing Process Variables in Drilling and Blasting1
Influence of Water Content on Rock Mass and Mine Support Condition in the Taimyrsky Mine1
A New Approach to Determining Aeration Intensity in Flotation1
Floatability of Low-Oxidizable Molybdenum and Antimony Sulfides in Controlled Oxidation–Reduction Conditions1
Electric Disintegration of Spodumene Pegmatites into Mineral Fractions for Lithium Extraction1
Estimation of Uniaxial Compressive Strength of Travertines Using Leeb Hardness1
Identification of Mining Waste Disposal Facilities Using Remote Sensing Data1
Analysis of Undermined Ground Surface Movements at the Atasu Iron Ore Deposit1
Justification of Potentiality of Mine Drain Water Injection in Deep Geological Structures: A Case-Study of Yakovlevsky Mine1
Influence of Natural Additive on Slurryability and Flowability of Iron Ore1
DEM-Based Analysis of Ore Losses in Sublevel Stoping1
Experience of Drilling-and-Blasting in Diamond Fields in Yakutia1
Justification of Criteria for Selecting Coal Waste Dumps Suitable for Heat Recovery1
Experimental Analysis of Slide Throttle Valve Dynamics1
Intensification of Basic Processes in Separation of Difficult Diamond-Bearing Raw Materials1
Recyanidation of Gold Heaps Tailing at Hassai Region in Red Sea State, Sudan1
Methane Release in Failure of Microstructure in Coal1
Susceptibility of Quartz-Bearing Rock Masses to Rock Falls1
Generalized Stress Deviator and New Limiting State Criteria for Geomaterials1
Ecological Assessment of Mining Areas at the Karabash Copper–Pyrite Ore Deposit Using Spectral Indices1
Comparative Analysis of Failure Envelopes Plotted According to Different Standards1
Justification of Pitwall Parameters: A Case-Study of Koktaszhal Deposit, Kazakhstan1
Spatiotemporal Analysis of Induced Seismicity at Rockburst-Hazardous Mineral Deposits1
Influence of Magnetite Grain Size on Magnetic Susceptibility of Iron Ore Concentrates1
Oxidizability and Spontaneous Combustion of Native and Water-Bearing Ore and Rocks1
Physical Modeling of Tailings Dams in China: A Review1
New Formulations of Geomechanical Problems with Regard to Post-Limit Deformation of Rocks1
Single-Criterion Optimization of Limestone Supply under the Conditions of Variable Thermal Power Complex Structure and the Differences between Solutions1
Effect of Collector Physisorption on Flotation of Galena with Xanthate and Pb2+1
Geochemical Barriers for Waste Water Treatment in Mining Industry1
Specificity of Composition and Properties of Umbozero Loparite Concentration Tailings1
Flooding of Open Pit and Underground Mines in the Chelyabinsk Coal Field: Consequences, Problems and Solutions1
Characteristic Angles of Overlying Strata Collapse Caused by Underground Mining1
Flotation Application of Cationic and Mixed Anionic Collectors in Hanzhong Quartz Ore1
Modeling Rock Fracture in Closely Spaced Perimeter Blasting1
Action Chart and Main Controllable Parameters of Duty Cycle of Pneumatic Percussion Machine1
Effect of Liquid Nitrogen Treatment on Poro-Perm Properties of Coal1
Potential of Polymetallic Tailings as a Source of Barite1
Physical Modeling of Hydraulic Fracturing in Rock Mass with Conductive Fractures and a Cavity1
1.2254948616028