Russian Journal of Nondestructive Testing

Article	Citations
Indirect Evaluation of the Compressive Strength of Recycled Aggregate Concrete at Long Ages and after Exposure to Freezing or Elevated Temperatures	14
Investigating the Detectability of Surface Volumetric Defects in Ultrasonic Testing with the Use of Rayleigh Waves Generated by an Electromagnetic-Acoustic Transducer	13
Deep and Handcrafted Feature Fusion for Automatic Defect Detection in Quadratic Frequency Modulated Thermal Wave Imaging	12
Effect of Grinding Environments on Magnetic Response of AISI D2 Tool Steel	12
Estimation of Flank Wear in Turning of Nimonic C263 Super Alloy Based on Novel MSER Algorithm and Deep Patten Network	11
Automated System for Complex Non-Destructive Testing of the Structure and Mechanical Properties of Mechanical Engineering Materials	10
Analyzing Ultrasonic Signal Parameters during High-Speed Rail Inspection	9
Features of Laser-Vibrometric Nondestructive Testing of Polymer Composite Materials Using Air-Coupled Ultrasonic Transducers	9
A Comprehensive Review on Damage Characterization in Polymer Composite Laminates Using Acoustic Emission Monitoring	9
Measurement of Residual Stress Using the Ultrasonic Method in Aluminum Welding: FE Analysis and Experimental Study	9
Laboratory Substantiation of Thermoelectric Method for Monitoring Contact Resistance	9
A Novel Method to Identification Type, Location, and Extent of Transformer Winding Faults Based on FRA and SMOTE-SVM	8
Sensitivity of Electromagnetic-Acoustic Multiple Shadow Method Using Rayleigh Waves in Inspection of Oil Country Tubular Goods	8
Probalistic-Information Approach to Assessing the Reliability of the Results of the Acoustic-Emission Method of Testing and Diagnostics	7
Technique for Analyzing Volumetric Defects Using Digital Elevation Model of a Surface	7
Ultrasonic Phased Array Total Focusing Method of Imaging with Rayleigh Waves Based on Principal Component Analysis	7
Nondestructive Method for Testing Elasticity of Walls of Human Veins and Arteries	7
Impact Damage Detection in Laminate and Honeycomb CFRPs using Lamb Wave Ultrasonic Sensing	7
Calculation Model of X-Ray Computed Tomography with Density Assessment Function	7
Comparative Sensitivity of Informative Parameters of Electromagnetic-Acoustic Mirror-Shadow Multiple Reflections Method during Bar Stock Testing	7
Investigating the Possibilities of Assessing the State of the Metal Structure of Pipelines in Service by Ultrasonic Method	7
Reconstructing the Image of Reflectors at Base-Metal–Weld Interface Using Ultrasonic Antenna Arrays	7
Testing Samples Made of Polymer Composite Materials Using Ultrasonic Antenna Arrays	7
Specific Features of Nondestructive Testing of Polymer and Composite Materials Using Air-Coupled Ultrasonic Excitation and Laser Vibrometry	7
Thermal Flaw Detection Scanner for Testing Large-Sized Flat Products Made of Composite Materials	6

Increasing Rate of Recording of Echo Signals with Ultrasonic Antenna Array using Optimum Sparsing of Switching Matrix with a Genetic Algorithm	6
Increasing the Rate of Recording Echo Signals with an Ultrasonic Antenna Array Using Code Division Multiple Access Technology	6
One Approach to the Numerical Solution of the Basic Equation of Magnetostatics for a Finite Cylinder in an Arbitrary External Field	6
Parametric Assessments of Self-Healing Characteristics in AA2014–NiTi-Based Metallic Composites through Destructive and Nondestructive Evaluation	6
Experiment on Lamb Wave Tomography of Aluminum Plate Based on Fan-Beam Scanning	6
Testing the Loading of Bearing Rings with Surface Waves Using Acoustoelasticity Effect	6
Imaging Electric Signals of a Magnetic Field Transducer with Hysteretic Interference for Testing Metals in Pulsed Magnetic Fields	6
Monitoring Composite Fiber Failure Using Acoustic Emission System, Vibration Analyzer, and High-Speed Video Recording	5
Deep Learning Based Simple CNN Weld Defects Classification Using Optimization Technique	5
Preparation of Hydroxyapatite Nanoparticles from Natural Teeth	5
Enhancement of Rayleigh Wave Generated by Electromagnetic Acoustic Transducer Based on New Magnetic Configuration	5
Using the Method of Acoustoelasticity for Evaluating Elastic Mechanical Stresses in the Material of Bearing Rings	5
Modeling Propagation of Ultrasonic Waves in Anisotropic Material of Additive Manufactured Products	5
Testing Electrophysical Parameters of Metamaterials by the Method of Surface Electromagnetic Waves	5
TOFD Echo Signal Processing to Achieve Superresolution	5
Comparing and Interpreting Results of Processing In-Line Inspection Data for Corrosive Gas Transportation Conditions	5
Statistical Analysis of Defect Dection in Glass Fiber Reinforced Polymers Using Frequency Modulated Thermal Wave Imaging	5
Influence of Destabilizing Factors on Results of Thermoelectric Testing	5
Method of State and Residual Resource Assessment of Excavator Bucket Tooth Caps	5
Application of Adaptive Anisotropic Diffusion Filter To Improve the Reflector Image Quality when Performing Ultrasonic Nondestructive Testing	5
Parameters of Acoustic Inhomogeneity for Nondestroductive Estimation of the Influence of Manufacturing Technology and Operational Damage on the Structure of Metal	5
Thermal Nondestructive Testing: Development of Conventional Directions and New Trends (A Review)	5
A Microwave Coaxial Sensor for Non-Destructive Detection and Analysis of Cracked Teeth	4
Locating Acoustic Emission Signals Due to Shock Impacts on a Carbon Fiber Sample Using Piezoelectric and Fiber Optic Sensors	4
Problems of Locating Acoustic Emission Sources	4
Chirp Z Transform Based Barker Coded Thermal Wave Imaging for the Characterization of Fiber Reinforced Polymers	4
Assessment of the Compressive Strength of Self-Consolidating Concrete Subjected to Freeze-Thaw Cycles Using Ultrasonic Pulse Velocity Method	4
Quantitative Nondestructive Testing of Steel Wire Rope Based on Optimized Support Vector Machine	4
Application of Non-Destructive Testing for Condition Analysis, Repair of Damages and Integrity Assessment of Vital Steel Structures	4
Real-Time Ultrasonic Monitoring of the Vulcanization Process in Nitrile Rubbers	4
Vibrations of a Layer with Delamination in the Framework of the Gradient Elasticity Theory	4
Estimation Method of Mechanical Properties of Ferromagnetic Materials Based on Pulsed Eddy Current	4
Thermal Nondestructive Testing of Composite and Metal Parts Manufactured by Additive Technologies	4
Development of Vibrothermography as a Method for Nondestructive Testing of Products Made of Polymer Structural Materials with the Use of Forced Mechanical Vibrations	4
Applying Plane Wave Imaging Technology in Ultrasonic Nondestructive Testing	4
Kinetics of Damage Accumulation and Failure in the Zones of Stress Raisers in Sample Rupture Tests	4
Study of the Degradation Effects on Aged Wood Beams from the Cathedral of Morelia, Mexico by Acoustic Birefringence Measurements	4
Analysis and Examination of Aluminum Sheets Suitable for Automotion Body: Ultrasonic Testing, Signal Processing, Simulation	4
Evaluating the Probability of Detecting Acoustic Emission Signals Using the Amplitude Discrimination Method with a Low Signal-to-Noise Ratio	4
Analyzing the Influence of Thermal NDT Parameters on Test Performance	4
Calculating the Strength of Magnetic Field from a Homogeneous Cylinder of Finite Dimensions Placed in an Arbitrary External Field	4
On Spectral-Acoustic Method for Estimating Porosity of Metals Produced by Hot Isostatic Pressing	4
Effectiveness of Biomaterial Coating on Bone Density Diagnosis Using Modulated Thermal Wave Imaging: A Numerical Study	4
On the Specific Features of Using the Phenomenon of Acoustoelasticity When Testing the Stress State of Anisotropic Material of Technical Objects at Subzero Temperatures	4
A Robust Approach for Locating and Assessing Mechanical Faults in an Actual Transformer Winding Using the State Space of Its Lumped Equivalent Model	4
Ultrasonic and Eddy-Current Fatigue Monitoring of Austenitic Steel Welded Joints	4
Study on the Relationship between Bolt Anchoring Defects and Complexity of Nondestructive Testing Signal	4
Algorithms for Modeling the Formation and Processing of Information in X-Ray Tomography of Foam Materials	4
A Time Frequency-Based Approach for Defect Detection in Composites Using Nonstationary Thermal Wave Imaging	4
Evaluation of Permittivity and Thickness Gaging for Anisotropic Dielectric Coatings by the Method of Surface Electromagnetic Waves	4

Determining the Sensing Region of Surface Bonded PZT Sensor and Surface Mounted PZT Sensor in Electro-Mechanical Impedance Technique for Non-Destructive Testing	3
Modeling and Diagnosis of Induction Machines Operating under Open-Phase Fault	3
On the Use of Structural Noise Parameters in Testing 20GL Steel with Rayleigh Surface Waves under Elastoplastic Deformation	3
Welded Pipe Defect Detection Enhancement Using Regularized Kernel Estimation-Based Image Processing in Radiographic Testing	3
Numerical Simulation of Carbon Fiber Reinforced Polymer Composite Delamination Damage Identification Using Lamb Wave and Filtered Back-Projection Method	3
Infrared Image Segmentation Algorithm Based on Multi Structure Morphology—Pulse Coupled Neural Network in Application to the Inspection of Aerospace Materials	3
Dynamic Correction of Sensitivity of Flaw Detection Channels in High-Speed Rail Inspection	3
On Use of Slots in Modelling Cracks in Ultrasonic Testing	3
An Investigation of the Void Structure of Lightweight Concrete Containing Waste Undersize Pumice Additive Using Nondestructive Methods	3
Differential Background of Electric Signal Read from an Induction Magnetic Head	3
Evaluation of Heat Treatment Effect on the Tensile Strength of Mild Steel Welded Joints Using Ultrasonic Testing	3
Algorithm for Evaluating Errors in Recognition of Materials in X-Ray Testing System Containing X-Ray Sandwich Detectors	3
Nondestructive Detection of Depth-Dependent Defects in Carbon-Fiber-Reinforced Polymer Composites by Terahertz Time-Domain Spectroscopy	3
Using Amplitude Analysis of Acoustic Emission Signals under Cyclic and Static Loading of Steel Samples	3
Barkhausen Noise Signal Analysis of IS 2062 Steel and AISI D2 Tool Steel with Different Range of Magnetizing Frequency and Intensity	3
Evaluating the Efficiency of Using Ultraviolet Radiation Sources in Carrying Out Fluorescent penetrant Testing	3
Modernizing the Echo Method of Ultrasonic Flaw Detection	3
Experimental Investigation of the Parameters Influencing the Surface Defect Detection by Using the Critically Refracted Longitudinal Waves	3
Estimation of the Segregation in a High Carbon Cast Steel by Thermoelectric Power Means	3
A Technique for Practical Reconstruction of the Form Parameters of Surface Two-Dimensional Defects Taking into Account Nonlinear Properties of a Ferromagnet	3
Method and Equipment for Infrared and Ultrasonic Thermographic Testing of Large-Sized Complex-Shaped Composite Products	3
Acoustic Emission Characteristics of Bond-Slip for BFRP Concrete at Different Loading Rates	3
Acoustic Characteristics of Solid Elastic Media with Oriented Microcracking	3
Studying Detectability of Plane Surface Defects by Ultrasonic Method Using Rayleigh Waves	3
Testing Uniaxial Stresses in Steels with Allowance for Their Magnetoelastic Sensitivity	3
Ultrasonic Characterization Method of Carbon Nanotubes Orientation Using Sparse Representation	3
Patch-Based Weld Defect Segmentation and Classification Using Anisotropic Diffusion Image Enhancement Combined with Support-Vector Machine	3
Quantitative Measurement of Defect Depth Using Pulsed Thermography: A Comparative Study	3
Investigation of Rolling Bearing Weak Fault Diagnosis Based on CNN with Two-Dimensional Image	3
Reducing the Noise Level of Reflector Images Using Plane Wave Imaging	3
Unknown Bearing Fault Recognition in Strong Noise Background	3
Wavelet Packet Analysis of Shotcrete-Rock Structures Using the Impact-Echo Method	3
Assessment and Characterization of Welded Mild Steel (E-6013) Using Ultrasonic Testing and Hilbert Huang Transform	3
Quantitative Nondestructive Testing of Broken Wires for Wire Rope Based on Multi-Image Fusion	3
An Empirical Study of Electrode Degradation in Gliding Arc Discharge	3
Detecting Flaws in Pumping-Compressor Pipe Couplings by Magnetic, Eddy Current, and Ultrasonic Multiple-Shadow Testing Methods	3
Digital Coherent Signal Processing with Calculations in Frequency Domain for Solving Ultrasound Tomography Problems Using Matrix Antenna Arrays with Nonequidistant Arrangement of Elements	3
Eddy Current Testing of Fatigue Degradation of Metastable Austenitic Steel under Gigacycle Contact-Fatigue Loading	3
Estimating the True Sensitivity of Acceptance Ultrasonic Inspection of Rails	3
Intelligence Systems for Quality Assessment of Threaded Surfaces and Flaw Monitoring Based on Digital Light Field Recording	2
Applying Compression Recognition Method to Achieve Superresolution of Echo Signals	2
A Nondestructive Testing Method of Incremental Permeability Based on Permanent Magnet Movement Magnetization	2
Magnetic Properties of Cyclically Tensile-Deformed Steel 09G2S Manufactured by Selective Laser Melting	2
Possibilities for Testing Welded Joints of the Walls of Steel Tanks Using Ultrasonic and Eddy Current Methods	2
Exact Formulas for Magnetic Field Strength inside and outside a Homogeneous Ellipsoidal Magnet Placed in an External Field Homogeneous in Magnet Vicinity	2
Laser Optoacoustic Method for Quantitative Estimation of Porosity in Cast Dispersion-Strengthened Metal-Matrix Composite Materials	2
Assessing Reliability of Testing Welded Joints of Steel Tank Walls Using Ultrasonic and Eddy Current Methods	2
Bearing Fault Feature Extraction Method Based on Variational Mode Decomposition of Fractional Fourier Transform	2
Study on Ultrasonic Detection Pattern Recognition of Natural Gas Steel Pipeline Defects	2
Adaptation of Methodology for Monitoring Damage Kinetics and Assessing Load-Bearing Capacity in Relation to Steel Products	2
Estimation of Defect Depth in Carbon Fibre Reinforced Polymer Using Frequency Modulated Thermal Wave Imaging: An Analytical Study	2
Compressive Thermal Wave Imaging for Subsurface Analysis	2
Ultrasonic and Mechanical Characterization of Borided Ceramic–Metal Composite	2
Methodological Principles for Determining Electrophysical Parameters of Materials and Coatings with a Complex Internal Structure Using Surface Electromagnetic Waves	2
Digital Focusing of Aperture when Probing Test Object by All Elements of Antenna Array in One Emission–Reception Cycle	2
Ultrasonic Testing of Butt Joints in Electric Steel Plates Using Lamb Waves	2
Ultrasonic Testing for Defects in Complex Shaped Metal Products	2
A Numerical Model for Ultrasonic Time-of-Flight Diffraction (TOFD) Testing of Austenitic Welds	2
Image Analysis Based Acoustics Approach for Tank Floor Condition Evaluation	2
Research on Quantitative Detection of Wire Rope Damage Based on Weak Magnetic Excitation	2
Features of Behavior of Magnetic Properties during Elastic Deformation of 20GN Hull Steel in Various Initial Stress–Strain States	2
Nondestructive Testing of Steel Wire Rope Based on Gagnetic Signal and Infrared Information	2
Volume Fraction Detection of Long Period Stacking Ordered Phases in Mg Alloys Based on Dual-Tree Complex Wavelet Packet Transform	2
Ultrasonic Testing of Welds in Thin-Walled Titanium Shells Using an Incomplete Penetration Indicator	2
Periodontitis Auxiliary Diagnosis Based on Deep Learning and Oral Dental X-ray Images	2
Finite Element Simulation of Laser-Synthetic Aperture Focusing Technique (SAFT) Detection of Additive Manufactured Parts	2
Nondestructive Evaluation of Track and Haulage Ropes of Aerial Ropeway Installation in India—A Case Study	2
A Circular Eddy Current Probe Using Miniature Fluxgates for Multi-Orientation Slit Evaluation in Steel Components	2
Investigating the Effect of High Voltage Electric Field on the Pesticide Residue in Tomatoes Using the Thermal Imaging Technique	2
A New Procedure for High Frequency Decentralized Modeling Parameters Identification of a Transformer Winding Construction Using Frequency Response Analysis Based on Logistic Chaotic JAYA Algorithm	2
Active Thermal Testing of Impact Damage in 3D-Printed Composite Materials	2
Forward Simulation Signal of Underground Pipeline Based on Ground Penetrating Radar	2
Determining the Coordinates of Reflectors in a Plane Perpendicular to Welded Joint Using Echo Signals Measured by Transducers in the TOFD Scheme	2
Relationship between Magnetoelastic Sensitivity of Magnetoelastic Demagnetization of Steels 60G and 65G and Coercive Force and Magnetostriction	2
Reconstructing the Topography of Surface Defects of Ferromagnets in a Normal Magnetization Field	2
Debonds and Water-Filled Defects Detection in Honeycomb Sandwich Composites Based on Pulse Infrared Thermography NDT Technique	2
Temperature Influenced Anisotropic Elastic Parameters of Red Pine	2
Hybrid Fuzzy Time Series Model and Data Fusion for Predicting Remaining Useful Life	2
Selective Magnetic Testing of Thickness and Hardening Degree of Surface Layers on Steel Objects	2
Verification of a Technique for Reconstructing the Shape of Defects in Soft Magnetic Ferromagnets Using MFL Data	2

Deep Learning for Time Series-Based Acoustic Emission Damage Classification in Composite Materials	2
Estimation of Structural Degradation of the Heat Affected Zone of the Welded Joint Under Fatigue	2
A Structured Light Vision Sensor for Online Measurement of Steel-Plate Width	2
Experimental Study of Diffraction of Elastic Waves on Crack Model	2
Experimental Investigations on the Influence of Surface Topography in Sliding Wear Behaviour of Sustainable Polymeric Composites	2
Analyzing the Processes of Carbon Fiber Sample Failure Using Acoustic Emission and Strain Gaging	2
Diagnosing the Vibration State of the Rotors of a Double-Flow Turbojet Engine Using Phase-Frequency Characteristics Obtained without Using a Shaft Position Sensor	2
Detection and Segmentation of Cracks in Weld Images Using ANFIS Classification Method	2
Developing a Method for Ultrasonic Quality Control of Plastic Products Obtained by Rotary Moulding Method	2
Investigation of the Performance of a Piezoelectric Ultrasonic Transducer by Finite Element Modeling	2
Effect of RHA on Mechanical Properties of GGBS Based Alkali Activated Concrete: An Experimental and Statistical Modelling	2
Ultrasonic Inspection of the Setting Mechanism of Glass Ionomer Cement	2
Dependence of Signal from Continuous X-ray Sensor on Values of Technological Parameters in Hybrid Additive Process of Electron Beam Surfacing by Wire	2
Modelling Acoustic–Electric Nondestructive Testing for Defects in Dielectric Materials	2
Detection of Cracks in Solar Panel Images Using Improved AlexNet Classification Method	1
Study of Residual Welding Stresses for Underwater Wet Welding of Low-Alloy Steel Using Magnetic Anisotropic and X-ray Diffractometry Methods	1
Accelerating Algorithm for Total Focusing Method Imaging Based on Optimization of Full Matrix Data	1
Research on Direct Tensile Experiment of Rock-Concrete Interface Using Acoustic Emission Technology	1
Detection of Electrical Fault in Medium Voltage Installation Using Support Vector Machine and Artificial Neural Network	1
Total Focusing Method Approach of Ultrasonic Phased Array Based on Compressed Sensing	1
Study on Material Damage Characterization of High-Pressure Hydrogen Storage Vessels Based on DIC and Acoustic Emission Entropy	1
Automatic Detection of Threat Objects in X-ray Baggage Inspection Using Mask Region-Based Convolutional Neural Network and Deformable Convolutional Network	1
Study on Ultrasonic Propagation Path in Nonuniform Temperature Field	1
Enhancing IR Thermographic Inspection of Subsurface Defects by Using the Technique of Edge Detection	1
Possibilities of Manual Eddy Current Testing for Depth Gaging of Contact-Fatigue Cracks on Rail Rolling Surface	1
Reducing Dead Zone in Ultrasonic Time-of-Flight Diffraction (TOFD): A Review	1
Classification and Sizing of Surface Defects in Pipelines Based on the Results of Combined Diagnostics by Ultrasonic, Eddy Current, and Visual Inspection Methods of Nondestructive Testing	1
Method of Processing Acoustic Information for Purposes of Monitoring State of Valves of Gas Cleaning Equipment	1
Calculation of Magnetic Field Strength from a Semi-Infinite Cylinder Placed in an Arbitrary External Field	1
Assessing Hazard Degree of Crack-Like Defects Based on Acoustic Emission Testing under Local Low-Temperature Loading	1
Development of an Empirical Model for Damage Degree Assessment in Steel Specimens Based on the Results of Statistical Processing of Acoustic Emission Signal Flow	1
Method for Processing Results of Magnetic Testing for Reliable Real-Time Detection of Critical Continuity Defects	1
An Ultrasonic Non-Destructive Evaluation of Contents of Silica Powder and Carbon Black in Nitrile Rubbers	1
Algorithm for Optimizing the Parameters of Sandwich X-ray Detectors	1
Effect of Hardening Frictional Treatment on Features of Eddy Current Testing of Fatigue Degradation of Metastable Austenitic Steel under Gigacycle Contact Fatigue Loading	1
Enhanced Subsurface Analysis Using Proper Orthogonal Decomposition in Nonstationary Thermal Wave Imaging	1
Ultrasonic Inspection Technique for Welded Joints Obtained by Spot Friction Stir Welding	1
Testing for Defects in Pulsed Magnetic Field Transmitted Through Metal	1
Evaluation of the 6082-T6 Aluminum Thick Plates Welded Joints Performance for High Stress Industrial Application According to European Standards	1
Study on the Aging Degree of Historical Silk by the Surface Resistance Method	1
Solving the Inverse Problem of Surface Reconstruction during Electron Beam Surfacing	1
Design of 3D X-ray Microtomograph Based on Its Digital Twin	1
Detecting and Evaluating Water Ingress in Horizontally Oriented Aviation Honeycomb Panels by Using Automated Thermal Nondestructive Testing	1
Assessment of Local Defects on the Inner Surface of Gas Pipelines Transporting CO2-Containing Products	1
Multiple Damage Prediction in Tubular Rectangular Beam Model Using Frequency Response-Based Mode Shape Curvature with Back-Propagation Neural Network	1
The Acoustic Properties of Aspen Wood (Populus tremula), Modified by the Ultrasonic Method	1
Revealing Magnetic Anisotropy in Austenitic Chromium–Nickel Steel After Rolling	1
Comparison of Damage Distribution and Ultrasonic Nonlinear Responses of Two Typical Plate Structures	1
A New Method of Active Thermal Testing: Combination of Heating and Forced Cooling	1
Experimental Method to Enhance Sensitivity and Accuracy of Measurements in Measuring Fracture Parameters around the Crack Tip Using Compact Hololens Imaging System	1
Analysis of the Parameters of Bottom Signals in the Area of Welded Joints of Rails under High-Speed Ultrasonic Testing	1
Investigation of High-Frequency Guided Wave Modes Applicability in Defect Detection Using Phased Array Ultrasonic Transducer	1
Theoretical and Experimental Studies of the Bone Damage Detection by the Ultrasonic Method	1
An Eddy Current Testing Probe with Dual-Frequency Excitation to Detect Deep Cracks	1
Automatic Segmentation by the Method of Interval Fusion with Preference Aggregation When Recognizing Weld Defects	1
Determining the Type of Reflector from Amplitudes of Flares Reconstructed in Various Acoustic Schemes	1
Reconstruction of Impact Damage in CFRP Laminate Based on Infrared Thermography	1
Research Progress on Ultrasonic Nondestructive Testing Technology for Metallic Additive Manufacturing Components: A Review	1
Nondestructive Characterization of Corrosion Properties of Stainless Steel and Titanium Alloys	1
Nondestructive Testing of Local Microcracking in Laboratory Mineral Samples Using an Acoustic Method with a Laser Source of Ultrasound and Its Verification with X-ray Computed Tomography	1
Debonding Defect Detection by Applying Pulsed, Lock-in and Linear Frequency Modulation Thermal Excitation Methods in the Inspection of Fiber-Reinforced Metal Laminates	1
Simulation of Air-Coupled Transducer Operation in Structural Health Monitoring Systems	1
Simulation and Implementation of a High Sensitive Differential Eddy Current Giant Magnetoresistance Probe for Non-Destructive Testing	1
Acoustic and Electromagnetic Properties of Maraging Iron–Chromium–Nickel Alloy with Addition of Copper in Mechanical Tension	1
On the Question of Interpreting the Echograms of Ultrasonic Pulse Flaw Detector	1
A New Method for Wellhead Device Defect Identification with Ultrasonic Signals	1
Mathematical Description and Analysis of Vibration-Induction Transducer Signal Due to Normal Component of Magnetic Scattering Fluxes over a Defective Section	1
Constructing Dispersion Characteristic of Adjustment Factor When Testing Compact Square-Section Products Using Impact Echo Method	1
Method for Solving Inverse Geometric Problem of Magnetostatics for Surface Defects of a Soft Magnetic Ferromagnet	1
Effectiveness of Using Thermal Imagers of Various Types in Active Thermal Testing of Delaminations in Nonmetals	1
Fast Method to Reconstruct and Enhance CT Images: Applied to Metal Artifact Reduction	1
The Research and Application of Wheeled Dry-Coupling Ultrasonic Technology in Steel Plate Thickness Measurement	1
Ultrasonic Tomography Using Sparse Antenna Arrays and Frequency Domain Post-Processing	1
Method for Identifying the Grout Defects of the Anchors at Ultra-Early-Stage Based on Time-Domain Waveform Characteristic Reflection Points	1
Reliability of Dye Penetrant Inspection Method to Detect Weld Discontinuities	1
X-Ray Tomographic Study of Pore Volume Fraction in Samples of Polymer Composite Materials. Scanning and Reconstruction of Tomographic Data	1
Testing Semiconductor Products Using Low-Frequency Noise Parameters	1
Ultrasonic Adaptive Tomograph of Concrete Products with Non-Standard Configuration	1
Erratum to: Measuring the Acoustic Characteristics of Compact Concrete Building Structures Using the Impact Echo Method	1
Study of Structural Composite Joint Damage by the Digital Image Correlation	1
Scanning Path Planning of Ultrasonic Testing Robot Based on Deep Image Processing	1
Immersion Testing of Curved Profile Objects by Surface Ultrasonic Waves	1
Noninvasive Transmission Line Diagnostic Using FRA Technique	1
Three-Dimensional X-Ray Tomography of Industrial Objects with Limited Sizes of the Recording Screen	1
Radiographic Analysis with Parametric Optimization for Minimizing Defects in Metal Inert Gas Welding Using a Substrate	1
The Law of Response of Propagation Time and Amplitude of Ultrasonic LCR Wave in the Elastic-Plastic Deformation of X70 Steel	1
Ultrasound Tomography Based on the Inverse Coefficient Problem as a Way to Combat Pattern Noise	1
Segmentation of an Ultrasonic Reflector Image Based on Analyzing the Proximity of Its Histogram to the Rayleigh Distribution	1
Ultrasonic Measurement Optimization of Spot Welding Diameter of Thin Plate Based on Gain Compensation Algorithm	1
Nondestructive Evaluation by Eddy Current and Ultrasonic Technique of 475°C Embrittlement Effects in DSS Duplex Stainless Steels and Corrosion Behavior	1
Assessment the Surface Characteristics of Heat-Treated AISI 1040 Steel Using Magnetic Nondestructive Techniques	1
On the Issue of Interpretating Echograms in the Contact Technique	1
Application of Laser Scannung Thermography and Regression Analysis to Determine Characteristics of Defects in Polymer Composite Materials	1
Non-Stationary Thermal Wave Mode Decomposition: A Comparative Study of EMD, HVD, and VMD for Defect Detection	1