Journal of Macromolecular Science Part A-Pure and Applied Chemistry

Article	Citations
Facile modification of polyvinylidene fluoride membrane for enhancing dialysis performance: sulfonation, adding polyethylene glycol and tuning coagulation bath temperature	37
Soluble, transparent and heat-resistant fluorinated copoly(ether imide)s containing pyridyl and biphenyl units in the main chain	32
Lipase catalyzed synthesis of bio-based polyamide 5.6: an alternative route	29
The synthesis of bottlebrushes with improved longer side chains by combining grafting through and grafting from methods	26
Recent advances in flame retardant polymers via thiol-ene click chemistry	22
Cosolvent effect on morphogenic changes of self-assembled aggregates from biodegradable polylactones	22
Conjugated microporous polymers promote photoswitching in the solid-state	22
Morphological study of the particle-to-fiber transition threshold during electrohydrodynamic processing of chitosan solution	22
Temperature and pH responsive polymers: sensing applications	18
The green synthesis of oligo(azomethine)s based on p-anisidine and o-anisidine: reaction conditions, electrochemical and thermal properties	18
Preparation and application of a novel pH-responsive linalool carboxymethyl chitosan hydrogel	17
Polysulfide-ene polymerization of bisacrylamides and bismaleimides toward sulphur-rich polymers	17
Mixed matrix composite PEM with super proton conductivity developed from ionic liquid modified silica nanoparticle and polybenzimidazole	17
Recent progress in pendant rhodamine-based polymeric sensors for the detection of copper, mercury and iron ions	16
Gelation of copolymers of acrylamide and sodium acrylate upon coordination with Cu 2+ ions in concentrated solutions	16
Synthesis and optical properties of fluorinated polyurethaneimide electro-optic waveguide polymer	15
A novel glycidyl ether type tetrafunctional epoxy resin: synthesis, cure kinetic and properties	15
Fabrication, thermal and in vitro behaviors of ciprofloxacin loaded β-cyclodextrin-PEG based polyurethanes as potential biomaterial for wound dressing applications	14
Effect of the content of starch on the biocompatibility, bacterial inhibition, and drug release performance of semi-IPN collagen-polyurethane hydrogels	14
Side-chain alanine-based block copolymer as natural product delivery system	14
Synthesis of a polyacetylene derivative bearing aspirin with chiral charge carrier “chiralions”	14
Exploring the role of polymeric nanoparticles in transdermal delivery of natural bioactive molecules: an overview	14
Preparation and characterization of novel functional tri-block copolymer for constructing temperature/redox dual-stimuli responsive micelles	13
Bio-sourced tartaric acid-derived tartarimides as diol counterparts towards renewable polyurethanes	13
Antioxidant and catalytic reduction activity of green synthesized gold nanoparticles using water-soluble chitosan	12

Preparation and relationship between structure and properties of PTMEG based polyurethane acrylate UV cured films	12
Poly(ester-urethanes) derived from poly(ε-caprolactone) macrodiols: Effect of the molar ratios using design of experiments, synthesis, and characterization	12
Synthesis and characterization of soluble and heat-resistant aromatic polyamides derived from diamine; N-(3,5-diaminophenyl)-4-(naphthalen-7-yloxy)benzamide and various aromatic diacids	12
Emerging trends in olefin polymerization: a perspective	11
Investigating the effect of compatibilizers on environmental stress cracking resistance in polypropylene/low density polyethylene blends	11
Green synthesis of multifunctional responsive hydrogel embedded with silver, based on xanthan gum, N-isopropylacrylamide, vinyl imidazole, and Luffa cylindrica for wound healing	11
A sensitive “turn-off-on” fluorescence platform for bilirubin detection based on conjugated polymer nanoparticles and ferric ions	11
Synthesis and structural characterization of acrylonitrile/vinyl imidazole copolymers and their amidoximated derivatives	11
Rapid synthesis and post-polymerization modification of poly(vinylene sulfide) via sequential nucleophilic thiol-yne/ene click reactions	11
Preparation of polyethyleneimine-modified porous polyacrylonitrile electrospun nanofibers for efficient removal of methyl orange	11
Homogeneous and heterogeneous catalysts for the synthesis of highly reactive polyisobutylene: discovery, development and perspectives	11
An environment-stable and tough wearable sensor enabled by xanthan gum-assisted hydrogel	10
Hyaluronic-acid based redox-responsive hydrogels using the Diels-Alder reaction for on-demand release of biomacromolecules	10
Functional polymeric coatings: thiol-maleimide ‘click’ chemistry as a powerful surface functionalization tool	10
A novel degradable sealing material for the preparation of dissolvable packer rubber barrel	9
Designed ultrafine polymer-coated manganese-cobalt ferrite nanoparticles loaded with anticancer drug: efficacy enhancement through host:guest complexation on the polymer surface	9
Synthesis and properties of bio-based polyesters from a 2,4-dihydroxyacetophenone derivative	9
Radical dendrimer: bis-indolyl polyurethane dendrimers containing TEMPO radicals for inhibition of cancer cell growth	9
One-step preparation of durable pH-responsive polyurethane foam for oil/water separation	9
Synthesis, characterization and evaluation of novel HIPE hydrogels: Application for treatment of hazardous waste incineration plant effluent	8
Synthesis, characterization and evaluation of the toxicity, drug release ability and antibacterial capacity of nanocomposites of polyethylene glycol and functionalized carbon nanotubes	8
A green approach to synthesize silver nanoparticles in gelatin/poly(2-hydroxyethylmethacrylate-co-2-acrylamido-2-methyl-1-propanesulfonic acid) hydrogels with Verbascum Longipedicellatum extrac	8
Synthesis and properties of modified polyimides containing multiple side methyl and biphenyl structures	8
RAFT mediated dispersion copolymerization of glycidyl methacrylate and octadecyl methacrylate	8
Pendant propargyloxy-functionalized aromatic (co)polycarbonates: synthesis, thermal crosslinking and chemical modification	8
Polymer grafted gibbsite nanoplatelets via direct initiator tethering and surface-initiated atom transfer radical polymerization	7
Studies on nitrile substituted bisphenol-F and bisphenol-Z based benzoxazines with enhanced thermal and hydrophobic properties	7
Electrostatic polyelectrolyte complexes: thermodynamic assembly properties	7
A hyaluronic-based prodrug with aggregation-induced emission for drug delivery and cellular imaging	7
Liposomes bearing poly(hydroxyethyl acrylate-co-ethyl vinyl sulfide) and indocyanine green and their temperature, oxidation, and near infrared-responsive release property	7
Statistical analysis of parameters involved in the synthesis of polar copolymers using a nickel (II) α-diimine complex	7
Synthesis of a new type of bisphenol-BC-based benzoxazines from sustainable bio-phenol for hydrophobic, dielectric and corrosion-resistant applications	7
Effect of carboxymethylated chitosan and cellulose acetate on mechanical properties of PLA blends for biomedical applications	6
Synthesis of bent-shaped azobenzene main-chain polymers for photo-switching properties	6
Preparation of poly(acrylonitrile-co-styrene) microspheres by reflux precipitation polymerization	6
Synthesis and characterization of amphiphilic Poly(2-hydroxyethyl acrylate-g-α-Methyl-β-Alanine) by Nitroxide-Mediated Polymerization Using “grafting through” approach	6
Investigation of morphology, crystal structure and property of ZnO/poly (methylstyrene-co-chloromethyl styrene) nanocomposite	6
Dual (thermo-/pH-) responsive P(NIPAM-co-AA-co-HEMA) nanocapsules for controlled release of 5-fluorouracil	6
Insights of mechanism and kinetics of acrylonitrile aqueous precipitation polymerization	6
The effect of cross-linking system and reinforcement on the cross-linking reaction of peroxide vulcanized ethylene-propylene-diene terpolymer (EPDM) matrix	6
Polyelectrolyte nanocomposite membranes based on chitosan and surface modified multi-walled carbon nanotubes for use in fuel cell applications	6
Radiation facilitated-immobilized lipase (RaFIL) mini biocatalytic reactor based on epoxy decorated PP tubes: Rapid colorimetric estimation of pesticide Chlorpyrifos	5
Thermal, mechanical and morphological properties of plasticized polyurethane binders based on PEG and HTPB blends	5
Synthesis, structural characterization, antifouling and antibacterial properties of polypyridinium salt coated silica nanoparticles	5
Quadratic electro-optic effect in the nonconjugated conductive polymer iodine-doped polyethylene terephthalate	5
Zinc oxide reinforced poly(para-aminophenol) nanocomposites: Structural, thermal stability, conductivity and ammonia gas sensing applications	5
Porphyrin linked carbon nanostructures in polymeric nanocomposite—state-of-the-art and headways	5
Improved tensile and impact responses of microcellular PP/γ-irradiated elastomer blends corroborating microstructure and crystallinity	5
Alkali treatment of polymer microspheres to efficiently remove rhodamine 6G from aqueous media	5
Shellac: Bridging the gap between chemistry and sustainability—A comprehensive review of its multifunctional coating applications for food, drug, and paper packaging	5

Effect of amino acid pendant groups on the helical configuration of polyphenylacetylene	5
Statement of Retraction: Synthesis of Nanocrystalline Polycalix[4]amides Containing Mesogenic Triazole Units and Investigations of Their Thermo Physical Properties and Heavy Metal Sorption Behavior	5
Poly(ß-hydroxy thioether)s: synthesis through thiol-epoxy ‘click’ reaction and post-polymerization modification to main-chain polysulfonium salts	5
Preparation, characterization, and antibacterial properties of biocompatible material for wound healing	5
Self-standing block shaped cobalt metal organic frameworks deposited graphite rod electrode for non-enzymatic electrochemical detection of imidacloprid in vegetable and fruit	5
Water-soluble and hydrolysis-resistant activated ester polymers: Synthesis, characterization, and application for preparing functional polymers	5
Sustainable rosin acid ester as internal electron donors in Ziegler-Natta catalysts for synthesis of isotactic polypropylene with high melt flow rate	5
Fabrication of electrospun graphene-oxide embedded polyacrylonitrile composite nanofibers for air filtration	5
Nanoclay reinforced chitosan nanocomposites—state-of-the-art and technological imprints	5
Cytocompatible hydrogel derived from dextrin and Poly(N-Vinyl acetamide) toward controlled antimicrobial release	5
Synthesis of carbohydrate based polythiophene graft poly(N,N-dimethylaminoethyl methacrylate)-co-poly(GLU-HEM) copolymer for lectin sensing	5
Effects of polymers with different anionic groups in drilling fluids and their properties of temperature and salt resistance	4
Ultrasonic mediated dual-site phase transfer catalyzed polymerization of N-butenyl isatin in two phase system- a kinetic study	4
Engineered 1,6-heptadiynes based polymeric prodrug system for anticancer drug delivery	4
Synthesis and characterisation of epoxy-functional cyclotriphosphazenes and investigation of their thermal behaviour in powder epoxy resin formulations	4
Preparation of poly(methacrylic acid) grafted on SiO 2 -NH 2 /PSF composite membranes for amlodipine removal	4
Improved version of oligo(2,4-diaminotoluene): synthesis, characterization, understanding, and application	4
Synthesis and characterization of novel fluorinated polyamides bearing tetraphenyl imidazole moieties	4
Impact of reinforcing ability of carbon fiber on the thermomechanical properties of epoxy based hybrid composites	4
Micellar self-assembly from pH-responsive polymer prodrug for targeted antitumor drug transportation	4
A simple and effective UV-initiated surface modification strategy for highly anti-fouling polyethersulfone microfiltration membranes	4
Covalent and environment-responsive biopolymer hydrogel for drug delivery and wound healing	4
Editorial - A message from the editorial team for 2024	4
Synergic fabrication of hybrid nanocapsules gold-organosilica for MRI-guided photothermal-enhanced synergistic effect chemodynamic lung cancer therapy	4
Folate receptor targeted chitosan and polydopamine coated mesoporous silica nanoparticles for photothermal therapy and drug delivery	4
Green synthesized silver nanoparticles based on N-3-(dimethylamino)propyl methacrylamide/2-hydroxyethyl methacrylate hydrogels for antibacterial wound dressing material	4
Nanoporous graphene in polymeric nanocomposite membranes for gas separation and water purification—standings and headways	4
Grafting parameters and surface free energy components of photosensitive poly(methacrylated spiropyran) brushes	4
Molecular-scale free volume and dynamic properties of a model ionomeric elastomer: Effect of curative systems	4
Shape memory nanocomposites of polyester/fullerene, polyester/graphene and polyester/carbon nanotube—state-of-the-art and progresses	4
Cyclopolymerization-based polymeric prodrug system for intracellular delivery and tracking of coumarin-functionalized chlorambucil in cancer cells	4
Effective removal of crystal violet from aqueous solution by graphene oxide incorporated hydrogel beads as a novel bio-adsorbent: kinetic, isotherm and thermodynamic studies	4
Crosslinked polymethacrylate absorbent with phenylalanine and stearate pendants	4
Synthesis of dendronized PAMAM grafted ROMP polymers	4
Preparation and application of a stretchable, conductive and temperature-sensitive dual-network nanocomposite hydrogel	4
Synthetic routes to modify hydroxyl terminated polybutadiene for various potential applications	3
Sulfonate-bridged semi-biopolyamide for Pb(II) electrochemical probing and dye adsorption	3
Emerging polyimide and graphene derived nanocomposite foam: research and technical tendencies	3
Determination of HOMO and LUMO of bis( β -diketonate)zirconium(IV) compound used as a catalyst in the ring opening polymerization of ε -Ca	3
Design and characterization of tunable chitosan hydrogels cross-linked with epiclon through amide bond formation modified with multi-walled carbon nanotubes for adsorption of aflatoxin B <	3
Synthesis and characterization of methacrylic acid based amphoteric hydrogels: use as a dual drug delivery system	3
Synthesis and performance of novel fluoro acrylate polymer containing rigid cyclohexane group as a mesogenic core	3
Preparation of sodium alginate encapsulated anionic polyacrylamide microcapsules with delayed thickening performance	3
High thermal stability and low dielectric constant of soluble polyimides containing asymmetric bulky pendant groups	3
Modification and improvement of aging resistance for HNBR/graphite composites	3
Diethylaluminum chloride-co-initiated cationic polymerization of isoprene: dramatic effect of the nature of alkyl halide on the properties of synthesized polymers	3
Nanomolar detection of hypochlorite in ground water samples by a norbornene-based polymeric sensor via unusual fluorescence turn-on response	3
A brief account of nanomaterials-reinforced polymer composites with sustained conductivity for flexible electronics	3
A short review on RAFT polymerization of less activated monomers	3
Adsorption of Cu(II) from aqueous solution by modified magnetic starch st/Fe 3 O 4 - g -pAA	3
Biopolymer hydrogel matrices for the stabilization and in-vitro delivery of anti-cancer polyoxometalate [CoW 11 O 39<	3
Donor-acceptor Stenhouse adducts as new emerging photoswitches: synthesis, light-responsive properties, and applications in polymers science	3
Synthesis and characterization of UV curable polyurethane-acrylate nanocomposite-based coatings enhanced with magnesium fluoride nanoparticles	3
Synthesis and properties of ABA type triblock copolymer from poly(dimethylsiloxane) macroinitiator: Development of novel attachable initiators for atom transfer radical polymerization	3
Study on preparation and in vitro release of gelatin microspheres loaded with steroidal saponins from Ophiopogon japonicus	3
Construction of sacrificial network in styrene-ethylene/butadiene-styrene triblock copolymer composites and their mechanical behaviors	3
Designing amphiphilic branched polymers for supramolecular self-assembly	3
Highly sensitive l -lysine molecularly imprinted two-dimensional photonic crystal hydrogel sensor	2
Biobased nanocomposite hydrogels derived from renewable resources for biomedical applications	2
Preparation of reversible temperature sensitive acrylamide terpolymer hydrogel for cascade drug loadings	2
Sulfonated PVA microspheres for drug delivery and simulated body fluid interaction	2
Preparation of polyamides containing tetraphenyl-imidazolyl units from 1,2-bis(4-iodophenyl)-4,5-diphenyl-1H-imidazole via C–N coupling reaction and their characterization	2
Fe3O4 magnetic nanoparticles-loaded thermoresponsive poly(N-vinylcaprolactam)-g-galactosylated chitosan microparticles: investigation of physicochemical, morphologi	2
Photoswitchable polyurethane based nanoaggregates for on-command release of noncovalent guest molecules	2
Synthesis and characterization of double network hydrogel based on gellan-gum for drug delivery	2
Slightly degradable, naturally antibacterial hydrogel matrixes derived from polyvinyl alcohol and linear/branched-polyethyleneimine as a wound dressing material	2
Green composites of bio-based epoxy and waste tea fiber as environmentally friendly structural materials	2
Preparation of nanoparticles of shellac and shellac-oligomer conjugates	2
Adsorption of methylene blue from aqueous solution using poly(2-acrylamido-2-methyl-1-propanesulfonic acid-co-2-hydroxyethyl methacrylate) hydrogel crosslinked by activated carbon	2
Solvent effect on the self-assembly of polyisobutylene-based glycopolymers	2
Synthesis and hydrolytic degradation of novel poly(ethylene 5,5’-isopropylidene-bis(ethyl 2-furoate))-based copolyesters incorporating sulfonated and pyridinic moieties	2
Facile fabrication of combination delivery of kaempferol and sorafenib with PEGylated gold nanoparticles delivery to breast cancer: Investigation of cytotoxicity and apoptosis induction	2
Recent advances in polymeric chemosensors for the detection and removal of mercury ions in complex aqueous media	2
Preparation of superhydrophobic and superoleophilic polyurethane foam for oil spill cleanup	2
Synthesis and characterization of biphenyldicarboxylic acid-modified poly(1,4-cyclohexylenedimethylene terephthalate) copolyesters	2
An injectable blend hydrogel for bone tissue engineering application: synthesis and characterization	2
Norbornenyl-pendant aromatic (co)poly(ether ether ketone)s	2
Preparation and sensing properties of fluorescent hydrogel based on chitosan modified with fluorene moiety	2
Use of polyvinyl alcohol-based cationic hydrogels modified with gold nanoparticles as drug and gene delivery systems with enhanced antibacterial properties	2
Polybenzoxazines containing borosiloxane structures as high-temperature resistance ( T g > 300 °C) and environment-friendly flame-retardant mat	2

Post-polymerization modification of pentafluorophenyl-functionalized polythioether via thiol-para-fluoro click reaction	2
Study on the structure and property of metallocene ethylene/1-heptene and ethylene/1-octene copolymers	2
Palladium complex composites based on fullerene encapsulated in porous zinc porphyrin polymers	2
Synthesis of hyperbranched polysiloxane/poly(N-isopropylacrylamide) microgel, its stimulus responsive behavior and study for drug release	2
Encapsulation of bioinsecticide oil in phenol-urea-formaldehyde terpolymer	2
Synthesis and characterization of benzotriazole-functionalized 1,3,5-triazine-based luminescent high-performance polymers and their antibacterial efficacy	1
Temperature induced helical contraction and expansion in branched polycarbodiimides and their solvent vapor sensing properties	1
Enhanced optical, thermal and electrical properties of chlorinated natural rubber/zinc ferrite nanocomposites for flexible electrochemical devices	1
Self-aggregation behavior of well-defined PEO-based amphiphilic tri-block copolymers and their application as metal detectors	1
Synthesis and characterization of PNM@IAM core-shell microgels through inverse emulsion polymerization and its application for heavy metal ions capture	1
A tunable hybrid of Laponite and zein produces versatile adsorbent and mechanically robust porous polymeric membranes for water remediation	1
Fabrication of hydrogel matrix for controlled release of ropivacaine for long-acting local anesthetic treatment in postoperative pain management	1
Synthesis and characterization of a polyester based on citric acid/ethylene glycol/glycerol	1
Liquid phase exfoliated nanosheets as multifunctional fillers to semicrystalline polymers	1
Functionalized amphiphilic polyethylene via direct copolymerizations of ethylene with α-olefin containing amino functionalization	1
Rapid polythioether synthesis and thioether network formation using thiol-yne chemistry of electron-deficient alkynes	1
Flame retardant rigid polyurethane foam composites based on microencapsulated ammonium polyphosphate and microencapsulated expanded graphite	1
Synthesis of new type temperature and pH sensitive hydrogels using drug-based p-(methacryloyloxy)acetanilide monomer and their usage as controlled drug carrier material	1
In-situ synthesis of silver nanoparticles on cellulose and its catalytic performance	1
Dual-responsive targeted hollow mesoporous silica nanoparticles for cancer photodynamic therapy and chemotherapy	1
Silicon-containing poly(diethynylbenzene-dipropargyl ether of bisphenol A)s：copolymerization, properties and their composites	1
Editorial - A message from the editorial team_2025	1
A polymeric suspension of amine functionalized silica nanoparticles derived fromMoonjgrass for the carbon capture and storage applications	1
Synthesis, self-assembly and drug release study of a new dual-responsive biocompatible block copolymer containing phenylalanine derivative	1
Monomer blended electrochemical polymerization in chiral liquid crystals to produce electro-optically active copolymer	1
Nanodiamond reinforcement effects in thermosetting matrices—design, functional features and significance	1
Highly solvent-dependent naphthalene diimide-based fluorescent polymer sensors for detecting p -xylene	1
Effect of carbon nanotubes on aging properties of hydrogenated nitrile rubber in the dilute oxygen medium	1
Designing of imine thiophene-ligated metal-complexes and implication in ethylene polymerization	1
Unexpected self-healing acceleration within urethane networks: lignosulfonate mediation of ionic and hydrogen bonds for ultra-strong recyclable elastomers	1
Synthesis of the effective flame retardant via modification of epoxy resin with phenylboronic acid	1
Activated carbon-decorated polyacrylonitrile fibers and their porphyrin-immobilized composites for removal of methylene blue dye and Ciprofloxacin in water	1
Cationic hydrogel with carbon quantum dots: synthesis and methyl orange adsorption capacity	1
Starch-based biodegradable film with poly(butylene adipate-co-terephthalate): preparation, morphology, thermal and biodegradation properties	1
Fluorinated poly(aryl ether)s with extremely low dielectric constant and high thermal stability by amino and epoxy cross-linking networks	1
Preparation, process optimization, and performance study of tea polyphenol-sodium alginate/ethyl cellulose composite microcapsules for green slow-release formaldehyde capture agent	1
Polymeric microgels: Synthesis, and emerging biomedical applications	1
Aromatic (co)polycarbonates bearing pendant 2,3-dimethylmaleimido group based upon a new phthalimidine-containing “cardo” bisphenol	1
Stereoblock polymerization of dienes in switching stereoselectivity by addition of MMAO cocatalyst	1
Preparation of fluororubber/carbon nanotube composites and the effect of carbon nanotubes on aging resistance and solvent resistance of fluororubber	1
Thermoresponsive oligo(ethylene glycol) methyl ether methacrylate homopolymers via RAFT polymerization in 1-alkyl-3-methylimidazolium hexafluorophosphate ionic liquids	1
The piezoelectric gel-fiber-particle substrate containing short PVDF-chitosan-gelatin nanofibers and mesoporous silica nanoparticles with enhanced antibacterial activity as a potential of wound dressi	1
Synthesis, characterization and antibacterial activity of hexasubstituted Coumarin-based Schiff base derivative of cyclophosphazene	1
Fe3O4 imbuing carboxymethyl cellulose/dextran sulfate nanocomposite hydrogel beads: an effective adsorbent for methylene blue dye pollutant	1
Controllable microfluidic fabrication of honeycomb capsule adsorbent via the one-step titration-gel method	1
Preparation of grafted adsorbent CPVA-g-PMAA and its adsorption performance for amlodipine	1
Synthesis and self-assembly of H-shaped amphiphilic block copolymer based on polyoxyethylene, polyoxybutylene, and poly(ε-caprolactone) units	1
pH-responsive and mechanical strong chitosan-based hydrogel reinforced with rice straw cellulose micro-fibrils for efficient removal of cu(II)	1
Rheological and electrical behavior of core–shell conduit comprising PCL-chitosan-gelatin/Al2O3 nanofibers and gellan-agar/poly aniline-graphene	1
Synthesis and properties of pH sensitive carboxymethylated hydroxypropyl chitosan nanocarriers for delivery of doxorubicin	1
Reactivity ratio study for the cationic copolymerization of vinyl ethers with 2,3-dihydrofuran	1
Study on preparation and properties of PVC/NBR/PVC-g-PMMA composite film	1
Editorial - A message from the editorial team for 2023	1
Electrochemical and optical properties of 3',4'-bis(alkyloxy)-2,2':5',2"-terthiophene bearing multifunctional polymers: Effect of alkyl chain length on electrochromic properties	1
Amphiphilic poly(disulfide)s by a three-component Cascade reactions: a therapeutic architecture for redox-responsive intracellular drug delivery	1
Tuning tear and slow crack growth resistance of linear low-density polyethylene resins through partial replacement of 1-butene with 1-hexene	1
Polymeric peroxides: Synthesis, characterization, degradation and applications	1
Enhanced mechanical property and water solubility of polyvinyl alcohol film via constructing hydrogen-bond network by adding carboxymethyl chitosan	1
Synthesis of novel magnetic carboxyl-functionalized crosslinked copolymer microspheres for methylene blue removal from water	1
Modification of biodegradable thermoplastic cassava starch/kapok fiber incorporated by tartaric acid and processed by compression molding technique	1