Journal of Thermal Spray Technology

Article	Citations
Mario Guagliano, Vincent Rat, and Katy Voisey Join JTST Editorial Team	75
Thanks to Our Guest Editors and Reviewers for Their Critical Contributions in 2022	67
Journal of Thermal Spray Technology Announces Editorial Transition	56
Journal of Thermal Spray Technology Announces Revised Aims and Scope	48
Novel Method of Predicting Deposition Efficiency in Cold Spray by Incorporating Sphericity into a 1D Analytical Model	38
In Situ Synthesis of FeAl Intermetallic Coatings by Wire Electrical Explosion-Spraying	35
Comparative Study of CGS, HVAF and VPS Coatings on Single Crystal Substrates for Turbine Blade Repair	34
Effect of Laser Remelting on the Microstructure and Properties of Fe-Based Amorphous Coatings	34
Investigation of Novel Nano-carbide WC/CoCr Coatings Applied by HVAF	33
Wear Mechanisms of Cold-Sprayed Stellite-6 During Reciprocated Dry Sliding Under Different Sliding Speeds	32
Effect of Scanning Rate on Microstructure and Properties of Fe-Based Amorphous Composite Coatings Prepared by Laser Cladding under Constant Heat Dissipation	30
Microcrack Morphology in the Thermal Insulation Performance of 8YSZ Thermal Barrier Coatings: A Mesoscale Numerical Study	28
Thermal-Sprayed Corrosion Protection for Marine Power Plants: Coating Quality and Effects on Fatigue Strength Using Standard Design Guidelines	28
Microstructure and Properties of Nickel-Clad Cubic Boron Nitride-Reinforced Ni-Based Composite Coating Laser Cladding on Martensitic Stainless Steel Substrates	26
Correction to: Preparation of Plasma Sprayed GDC Electrolytes for Metal-Supported Solid Oxide Fuel Cells	25
Investigating the Influence of Heat-Treated Powder Microstructures on Particle Bonding and Tensile Response in Cold-Sprayed AA7075	25
Failure Assessment and Life Prediction of Plasma-Sprayed Thermal Barrier Coatings Considering Top-Coat Cracking Behavior	23
Preparation of Plasma Sprayed GDC Electrolytes for Metal-Supported Solid Oxide Fuel Cells	22
Forming Behavior of Additively Manufactured Al/Ti Material Compounds Produced by Cold Spraying	20
Subsurface Weave Pattern Influences on Polymer Cold Spray Deposits onto Woven Fiber-Reinforced Composites	20
Wear and Corrosion of HVAF and HVOF-Sprayed WC-CoCr Coatings on Aluminum Alloy	20
Properties of Al0.5CoCrFeNi2Ti High-Entropy Alloy System: From Gas-Atomized Powders to Atmospheric Plasma-Sprayed Coatings	19
Preparation and Performance of Conductive Ti4O7 Coatings on SS316L Bipolar Plates	19
The Effect of Gas Pressure on the Microstructure and Mechanical Properties of 2219 Al Plasma-Assisted Cold Spray Coatings	19
Characterization and High-Temperature Fretting Wear Resistance of HVOF-Sprayed Cr3C2-NiCr, CoCrWC and CoCrWNiC Hardfacing Coatings	19

Effect of TiC on the Microstructure and Properties of FeCoNiCrMo High-Entropy Alloy Coatings by Plasma Cladding	19
Incorporation of TERGO and EG in Plasma Sprayed Ceramics Coatings for Improved Microwave Absorption and Tribological Properties	19
Effects of Different Laser Powers on the Structure and Properties of In Situ TiC-Enhanced Ni-Based Coatings	19
Outlook of Industry 4.0 Integrated Technologies in Thermal Spray Processes and Applications	18
Mechanical and Fracture Properties of As-Built Inconel 718 Produced by High-Speed Laser Directed Energy Deposition: Stability to Process Parameters Variation	18
Effect of Impact Angles and Temperatures on the Solid Particle Erosion Behavior of HVOF Sprayed WC-Co/NiCr/Mo and Cr3C2-CoNiCrAlY Coatings	18
Corrosion Behavior of Thermal Sprayed ZrO2·38Y2O3 and ZrO2·18TiO2·10Y2O3 Ceramic Coatings with Different Metallic Bonding Layers in Acid Solution	17
Parametric Study to Repair Leaks in Water Pipe Using the Low-Pressure Cold Spray Technique	17
Impact of Precursor Thermal Decomposition Reactions on YSZ Coatings Deposited with a Low-Power Plasma Torch at Short Spray Distance	17
Advancing Wear Resistance of HVOF-Sprayed WC-NiCr Coatings Through Laser Remelting	17
Multi-Objective Optimization of Process Parameters in Laser Cladding CoCrCuFeNi High-Entropy Alloy Coating	17
Effect of Wire Diameter on the Microstructure and Properties of Al-Based Coatings by Plasma-enhanced High-Velocity Arc Spraying	17
On the Applicability of Iron-Based Coatings Against Abrasion and Cavitation Erosion Wear	16
Nitriding Effect on HVAF FeMnCrSi Coating	16
Development of NiO-GDC Anode by Atmospheric Plasma Spraying for Metal-Supported SOFCs	15
High-Temperature Oxidation Resistance of Ti3SiC2-Self-Healing Thermal Barrier Coatings Fabricated by Laser Surface Alloying	15
Effect of HVOF Spraying Process on Particle Behavior of Fe-Based Amorphous Alloy Coatings	15
High-Temperature Oxidation Properties of Nano-HfO2-Doped NiCoCrAlY Coatings Prepared by Laser Cladding Technology	15
Effect of Post-heat Treatment on the Load-Dependent Wear Mechanisms of AISI D2 Tool Steel Manufactured by Laser Direct Energy Deposition	15
Polymer Metallization by Cold Spray Deposition of Polyamide-Copper Composite Coatings	15
Top–Down Approach for the Deposition of Photoactive (Na0.5Bi0.5)TiO3-Based Heterojunctions by Flame Spray: Analysis of Deposition Parameters	15
Microstructure and Thermal Cycling Behavior of Ta2O5 and Y2O3 Co-doped ZrO2 Coatings	15
Strengthening of Plasma-Sprayed AlCoCrFeNi High-Entropy Alloy Coatings by Laser Remelting	15
Acoustic Emission Sensor-Assisted Process Monitoring of Air Plasma-Sprayed Titanium Deposition	15
In-Flight Measurements of Particle Temperature and Velocity with a High-Speed IR Camera During Cold Gas Spraying of In718 and TiAlCrNb	14
Cord Plasma Spray (CPS), a New Robust Process with the Potential to Produce Advanced Coatings in IGT and Aero Applications	14
Structure–Property Correlation of Plasma-Sprayed Inconel625-Al2O3 Bimodal Composite Coatings for High-Temperature Oxidation Protection	14
Development of IN718 Coating for Repair Applications by High-Pressure Cold Spraying Followed by Heat Treatment	14
Development of Tungsten Repair Technology by Atmospheric Plasma Spraying of Tungsten and Friction Stir Processing	14
Three-Dimensional Numerical Simulation of Repairing Process by Laser Direct Energy Deposition	14
Enhancing Wear Resistance and Erosion Wear Performance of Laser Additive Manufactured 17-4PHss through Solution Aging Treatment	13
A Path Planning Method for Polishing Thermal Barrier Coatings on the Surface of Aero-Engine Blades Based on Point Cloud Slicing	13
Enhanced Fracture Toughness and Wear Resistance of Plasma-Sprayed Cr2O3 Coatings via TiO2 Content Optimization	13
Facile Fabrication of Micron-Laminated Cu-Al2O3 Coating with Long-Lasting Antifouling Performance and Excellent Wear Resistance	13
Influence of Ductility on Fracture in Tensile Testing of Cold Gas Sprayed Deposits	13
A Review of Thermally Sprayed Polymer Coatings	13
Wear Behavior and Mechanism in Different Atmospheres of Cold-Sprayed Sn11Sb6Cu Coatings	13
Microstructure and Tribological Properties of Thick (Ti, Cr, V) N Nanocomposite Coatings at a Wide Temperature Range	13
High-Temperature Wear Behavior and Mechanisms of Self-Healing NiCrAlY-Cr3C2-Ti2SnC Coating Prepared by Atmospheric Plasma Spraying	13
Analysis of Data Generation and Preparation for Porosity Prediction in Cold Spray using Machine Learning	13
Tungsten-Steel Functionally Graded Coatings for Nuclear Fusion Applications Manufactured by Cold Gas Spraying	13
Mechanical and Tribological Properties of High Velocity Air Fuel-Sprayed IN625 and IN718 Coatings	12
Microstructure and Properties of Age Hardening Steel-Based Coatings Strengthened By TiC Using Argon Arc Cladding	12
Solution Medium Suspension Plasma Spray (SMSPS): A Microstructure and High-Temperature Properties Analysis of YSZ Thermal Barrier Coating	12
Effect of Spray Distance on the Microstructure and Electrochemical Performance of LiCoO2 Cathodes Fabricated by Atmospheric Plasma Spraying	12
A Diffuse Interface Approach to Drop Impact Undergoing Solidification under a Horizontal Electric Field	12
Microstructure, Mechanical Property and Corrosion Behavior of Cold-Sprayed Zn Coatings on Mg Alloy Substrate	12
Vertical Stress State Analysis and Fatigue Life Prediction of Thermal Barrier Coating Considering TGO with Nonuniform Thickness	12
Scratch Adhesion Testing of Thick HVOF Thermal Sprayed Coatings	12
Nondestructive Full-Surface Thickness Evaluation of Thermal Barrier Coatings Using a Robotic Multi-angle 3D Scanning and Point Cloud Analysis System	12

Development of an Alternative to the Plasma Cladding Process: the Plasma Spray Melting Technology	12
Fast and Nondestructive Mechanical Characterization of Thermally Sprayed and Laser Cladded Coatings: Automated Surface Acoustic Wave Spectroscopy as a New Tool for Quality Control and Research	12
Scanning Acoustic Microscopy Characterization of Cold-Sprayed Coatings Deposited on Grooved Substrates	12
Structure and Oxidation Behavior of a Chromium Coating on Zr Alloy Cladding Tubes Deposited by High-Speed Laser Cladding	12
Synchronously Optimizing the Processability and Performance of Ni-Cr-Si-B Coatings by Alloy Design	12
Control of the Molten Pool Morphology and Crystal Growth Behavior in Laser Powder Deposition of Single-Crystal Superalloy via Adjusting the Defocusing Amount and Scanning Speed	12
Microstructure and Wear Resistance of WC-Ni/Al Coatings by Cold Spray Using WC Particle Electroplated Ni layer	12
Corrosion and Reciprocating Sliding Behavior of AC-HVAF Sprayed FeCrMoCBSi Amorphous Coating on Stainless Steel	12
Subsonic-Flame-Sprayed CoCrFeNi, AlCoCrFeNi and MnCoCrFeNi-Based High-Entropy Alloy Coatings and Their Tribological Behaviors	12
Dense TiB2 Coating with Fully Bonded Lamellae Deposited by Low-Pressure Plasma Spraying and Its Exploratory Application as the Negative Electrode of a Lithium-Ion Battery	11
A Machine Learning Approach for Analyzing Residual Stress Distribution in Cold Spray Coatings	11
Synthesizing AlN Coatings Using Suspension Plasma Spraying: Effect of Promotional Additives and Aluminum Powder Particle Size	11
Microstructures and Wear Resistance of Mo Coating Fabricated by In Situ Laser-Assisted Plasma Spraying	11
Correction to: Study on the Zinc Corrosion Resistance and Failure Mechanism of Cobalt-Based Carbide Coatings	11
Correction to: Cold Spray: Over 30 Years of Development Toward a Hot Future	11
Investigation of Direct Metal Deposition Processes Using High-Resolution In-line Atomic Emission Spectroscopy	11
Improved Deposition Efficiency of Low-Pressure Cold-Sprayed Tin Coating Through Powder Recycling	11
Influence of Binding Energies on Required Process Conditions in Aerosol Deposition	11
Corrosion and Wear Resistance of HVOF-Sprayed Ni-Cr-Co Multi-principal Element Alloy Coating on Copper Plate	11
Mechanical Properties of Cobalt Chromium Alloy Manufactured by Direct Energy Deposition Technology	11
Effects of Silicon and Titanium Addition on the Corrosion and Wear Behavior of Plasma-Sprayed Al0.4CoCu0.6Ni-Based High-Entropy Alloy Coatings	11
Journal of Thermal Spray Technology Volume 33 Best Paper Awards	11
Analysis and Comparison of Two Different Sensing Techniques for In Situ Coating Thickness Measurements	11
Long-Term Corrosion Behavior of Flame Sprayed Al-Based Coatings After Nano-alumina Sealing Treatment	11
The Effect of Water Film Surrounding the Deposited Particle on Bonding Area: A Numerical Study	11
Impact of Microstructure on Remelting Parameters and Mechanical Behavior of Thermally Sprayed NiCrBSi Coating	11
Numerical Investigation of YSZ Droplet Impact on a Heated Wall for Thermal Spray Application	11
Investigation of Microstructure and Mechanical Properties of Ni-Al Energetic Structural Materials Prepared by Cold Spraying	10
Air Plasma Spraying of MCrAlY Coatings with Low Oxide Content Enabled by Adding a Deoxidizer	10
In Situ Measurement of Track Shape in Cold Spray Deposits	10
Study of the Propane Detonation Spraying under Different Gun Structures	10
Mechanical, Metallurgical, and Cavitation–Corrosion Analysis of WC-NiCrBSi Cermet Coating Developed Via. Laser Cladding	10
Microstructure and Tribological Behavior of Supersonic Atmospheric Plasma-Sprayed Mo-/Fe-Based Amorphous Coating	10
Plasma-Sprayed La0.2Sr0.8MnO3-La0.3Sr0.7TiO3 Bilayer Coatings Along with the Interface Healing Processing Applied as the High Dense Interconnector for Tubular Solid Oxide Fuel Cells	10
Correction to: Steam Oxidation of Modified Silicon/Ytterbium Disilicate Environmental Barrier Coatings on SiC/SiC Ceramic Matrix Composites at 1250-1350 °C	10
Study on the Interaction between Corrosion and Sliding Wear of Thermal Spraying WC-10Co4Cr Coating	10
A New Method of Preparing In situ Synthesized Titanium Oxide Coatings by Very Low-pressure Reactive Plasma Spraying	10
Effect of Low Plasma Spraying Power on Anode Microstructure and Performance for Metal-Supported Solid Oxide Fuel Cells	10
Microstructure and High-Temperature Tribological Properties of Nickel-Based Composite Coatings with Laser In Situ Induced TiC and MoSi2 Reinforcement	10
Preparation of Low-Oxygen and High-Density Si-Al Alloy Targets via Plasma Spraying Technology for SiNx Films Sputtering	10
Analysis of Different High-Velocity Thermally Sprayed Coatings to Recover AISI H13 High-Pressure Die Casting Molds	10
Microstructure, Mechanical, and Dry Sliding Wear Performance of Equimolar CoCrNiTiMo and CoCrNiTiW High-Entropy Alloy Coatings	10
Correction to: Development of Single-Stage TiNbMoMnFe High-Entropy Alloy Coating on 304L Stainless Steel Using HVOF Thermal Spray	10
Effects of SiC on Microstructure and Properties of Coatings Prepared by Plasma Spraying Cr2O3-Al-SiC Powder	10
Advancements in Deposition of High Entropy Alloys Using Cold Spray Technology	10
Cost-Efficient Ti-V-Sn-Sb Chlorine-Evolving Electrodes Deposited by Liquid Plasma Spraying for Antibacterial and Wastewater Treatment	10
Plasma Spraying of Ceramic Coating with All Interfaces Bonded Chemically through a Ceramic Bond Coat Thermally Grown on Metal Substrate	10
Oxidation and Hot Corrosion Behaviour of Dual Phase 8YSZ + La2Zr2O7 and 8YSZ + Gd2Zr2O7 TBC Systems	9
Comparison and Porosity Prediction Modeling of SPS Coatings Fabricated via Conventional and Cascaded Torches	9
Corrosion Resistance of Flame-Sprayed CF/PEEK Coatings on 316L Stainless Steel for Marine Applications	9
Effect of Mo Addition and Water Vapor on the High-Temperature Corrosion Performance of APS Ni-Al-based Coatings	9
Microstructure and Mechanical Properties of Cold-Sprayed Ni/CrC-NiCr Composites with Varying Binder Phases	9
Effect of NiCrCoAlY Transition Layer Thickness on Structure and Properties of BNT/NiCrCoAlY Ceramic Coatings	9
Optimization of L-DED Parameters for AlMo0.5NbTa0.5TiZr Based on Response Surface Methodology	9
Influence of Surface Properties on Microbial Activity and Biofilm Attachment in Thermally Sprayed Cu-Bearing Coatings with Varied Cu Distributions	9
Effect of Nano-Fly Ash Additive on the Mechanical and Microstructural Properties of Plasma-Sprayed Mullite Coatings	9
Fatigue Life Prediction Study for Vane Thermal Barrier Coatings Based on an Axisymmetric Model and Genetic Algorithm	9
Correction to: Wetting Behavior and Functionality Restoration of Cold-Sprayed Aluminum-Quasicrystalline Composite Coatings	9
Residual Stresses Development during Cold Spraying of Ti-6Al-4V Combined with In Situ Shot Peening	9
The Arc Rotational Characteristics Inside a Plasma Torch with an External Magnetic Field	9
Effect of ZrO2 Peening Media on Microstructure and Mechanical Behavior of Al6061 Cold Spray Coatings	9
Behavior of Thermally Sprayed YSZ/CoNiCrAlY Coating System after Short-term Exposure to High-temperature Ammonia Flow Environment	9
Effect of Laser Energy Density on Amorphous Phase Content and Properties of Fe-Based Amorphous Coatings	9
Microstructure Characteristic and Wear Resistance of Al2CrFeNiMoSix High-Entropy Alloy Coating on Cr12MoV by Laser Cladding	9
A Modified Focused Ion-Beam Milling Approach to Reveal Subsurface Features of Plasma-Sprayed Ceramic Splats	9
Effect of Ni-Coated-Al2O3 Addition on Slurry Erosion Behavior of AlCoCrFeNi High-Entropy Alloy Coatings Prepared by Laser Cladding	9
Cold Spray Additive Manufacturing as a Sustainable Route for FeNi-Based Ferromagnetic Alloy Production	9
In Situ Spray Bead Acquisition and Analysis for Coating Thickness Predictions	9
Effects of Process Parameters on Cold Spray Deposition of Al-6061 Alloy	8
Effect of Powder Feed Rate on Mechanical Properties of Boron Carbide Coatings by Atmospheric Plasma Spraying (APS)	8
Enhancing Cold-Sprayed Nickel–Aluminum Bronze Coatings on Magnesium via Scanner-Based Laser Remelting	8
Microstructural, Mechanical, and Tribological Evaluation of HVAF-Sprayed Inconel 718 Coatings	8
Low-Pressure Cold Spray Deposition and Characterization of CNT-Reinforced Nanocomposite Coatings	8
Influence of Spray Trajectory on Residual Stress in HEA Coatings on Medium Carbon Steel Surfaces Applied via Plasma Spraying	8
Microstructure and Mechanical Property Enhancement of Cold Spray Additive Manufactured Al2O3/2024 Aluminum Matrix Composites through Thermo-Mechanical Coupling: A Case Study on Friction Stir Processin	8
Preparation of Si-Based Composite Anode for Li-Ion Batteries by Cold Spraying and Its Electrochemical Performance	8
High-Resolution Synchrotron µXRD and µXRF for Local Phase and Elemental Analysis in Suspension Plasma Sprayed Environmental Barrier Coatings	8
Effect of Graphene on High-Temperature Oxidation Behavior and Mechanism of NiAl Bond Coat	8
As-Sprayed Highly Crystalline Yb2Si2O7 Environmental Barrier Coatings (EBCs) by Atmospheric Plasma Spray (APS)	8
Characterization and Early-Stage Oxidation Behavior of CoNiCrAlY/Nano-Al2O3 Composite Coatings Using Satellited Powders Deposited by HVOF and LPPS Processes	8

Multiple Electrodes and Cascaded Nozzles: A Review of the Evolution of Modern Plasma Spray Torches	8
Reusing 316L Stainless Steel Feedstock Powder for Cold Spray Deposition	8
Correction to: Inelastic Deformation and Fatigue Cracking in TBC around Film Cooling Hole Subjected to Thermomechanical Loading	8
Wear Resistance of N-Doped CoCrFeNiMn High Entropy Alloy Coating on the Ti-6Al-4V Alloy	8
Additive Manufacturing of Metal Components by Thermal Spray Deposition on 3D-Printed Polymer Parts	8
Correction to: Process Optimization and Influencing Factors of Supersonic High-Energy Plasma Spraying of Al2O3-PF Composite Coatings on Polymer Matrix Composite Surface	8
Wear Characteristics of Thermally Sprayed Diamond-Reinforced Ni-P Coatings	8
Microstructural and Mechanical Properties of WC-17Co Deposited Using Laser Direct Energy Deposition (LDED) and High-Velocity Oxygen Fuel (HVOF)	8
A Comparative Study on Wear Resistance of Cold-Sprayed Aluminum/Quasicrystal Composite Coatings	8
Single-Particle Impact of Ti6Al4V and Ti-5553 in Cold Spray: A Novel Approach to Flattening Ratio and Selecting Johnson–Cook Model Parameters	8
Modeling Air Entrapment in the Impact-Freezing of YSZ Drops Using a Cahn–Hilliard Phase Field Model	8
Characterization of Microstructure, Mechanical Property, and Sliding Wear Performance of Plasma-Sprayed Novel Dense Na2Ti6O13 Coatings	8
Impact and Adhesion Mechanics of Block Copolymers in Cold Spray: Effects of Rubbery Domain Content	8
Integrating Machine Learning Approach into Plasma-Sprayed Lanthanum Zirconate Coatings for Thermal Barrier Applications	8
Formation of In Situ Al/TiAl3 Coatings on Electron Beam Melted (EBM) Ti-6Al-4V Alloy by Cold Spray and Induction Heating	8
Microstructure Evolution and Formation of Dual-Phase AlCoCrFeNiSi0.5 High-Entropy Alloy Powders by Mechanical Alloying	7
Effect of In situ Synthesis on the Microstructure, Corrosion, and Wear Resistance of Fe-Based Amorphous–Nanocrystalline Coatings	7
A Novel AA6061 Powder Reinforced with Al2O3 Nanoparticles for Cold Spray Deposition	7
Data-Driven Overlapping-Track Profile Modeling in Cold Spray Additive Manufacturing	7
Fabrication of Tremella-Like Zn-Based Composite Coating with Improved Photocatalytic Degradation Performance and Robust Superhydrophobicity	7
Thermomechanical Deformation Response in Cold Sprayed SiCp/Al Composites: Strengthening, Microstructure Characterization and Thermomechanical Properties	7
Numerical and Experimental Analysis of a Solid Shroud in Multi-arc Plasma Spraying	7
Influential Factors on the Combustion of the Polymer Binder System in F-HVOF	7
Development of an Expert System for Prediction of Deposition Efficiency in Plasma Spraying	7
Numerical Stress Analysis of TBCs at Film Cooling Hole's Edge based on TBC-Film Cooling System	7
Influence of Particle Loading in Micro-Cold Spray Direct Writing	7
Influence of the Nozzle Inner Geometry on the Particle History During Cold Spray Process	7
A Gauss Laser Pinning Method for Enhancing the Thermal Shock Resistance of Sprayed NiCoCrAlY Coatings	7
Tribological Behavior of Copper Coatings Deposited by HVAF and Cold Spray: A Comparative Assessment	7
Flame Spray Construction of Metal-Organic Frame Based Polyimide Coating for Marine Antifouling Applications	7
Investigation of Graphene-Reinforced WC-10Co-4Cr HVOF Coatings on Laser-Textured DH-36 Steel for Improved Cavitation and Scratch Resistance	7
Effects of Different Grit Blasting Environments on the Prepared Steel Surface	7
Study on Mechanical Properties and Electrochemical Corrosion Resistance of Arc Sprayed FeAlMoNbCrC and FeAlMoNiCrC Coatings	7
Evolution of Wear Mechanism Under Different Sliding Conditions of an Fe-Based Amorphous Coating Synthesized by Plasma Spraying	7
Properties of Al-Based Amorphous Coatings Prepared by Low-temperature HVOF Spraying	7
Experimental Study and Numerical Simulation of Y2O3 Coatings Deposited by Plasma Spraying at Different Torch Powers	7
Effect of Laser-Textured Edge Splashing on Adhesion and Fracture Mechanism of Plasma-Sprayed Coatings	7
Concentrated Solar Power Testing of Plasma-Sprayed Hybrid Thermal Barrier Coatings	7
Influence of Reduced Graphene Oxide (rGO) on Plasma Sprayed Nanostructured Coatings	7
In Situ Monitoring of Cracking Mechanisms in Multi-Layered Suspension Plasma-Sprayed Thermal Barrier Coatings	7
Investigation on the Microstructure Evolution and Properties of a Novel In-Situ Fiber Phase-Reinforced Nickel Composite Coating Deposited by Wide-Band Laser	7
The Effect of Exposure Conditions on the Long-Term Performance Evaluation of Undamaged and Damaged Wire-Arc-Sprayed Zinc-Aluminum Alloy Coatings	7
Announcing the Journal of Thermal Spray Technology 2025 Editor’s Choice Selections	7
About the New Lead Editor	7
Effect of Marine Bacillus Subtilis on Cavitation Erosion Resistance of HVOF-Sprayed WC-10Co-4Cr Coating in Artificial Seawater	7
Wetting Behavior and Functionality Restoration of Cold-Sprayed Aluminum-Quasicrystalline Composite Coatings	7
Correction to: Plasma Gas Chemistry Effects on the In-Flight Stoichiometric Changes of Ytterbium Silicate EBCs	6
The Microstructure, Surface Topography and Wear Resistance of Cold-Sprayed (Cr3C2-25(Ni20Cr))-(Ni-graphite) Composite Coatings Modified by Diode Laser Treatment	6
Thermal Shock Failure Analysis of LaMgAl11O19 Thick Ceramic Coatings Plasma Sprayed with Different Critical Plasma Spraying Parameters	6
Cold Spray Additive Manufacturing of Ti6Al4V: Deposition Optimization	6
Modeling Parameters for Finite Element Simulation of Residual Stress in Cold Spray and the Stress Evolution and Distribution	6
Physical Mechanisms in Plasma Spray Processing of Suspensions	6
Parameter-Dependent Bonding Properties of Sinusoidal-Texture-Modified Plasma-Sprayed Coatings	6
Effect of Particle Size on Ceramic Particle Content in Cold Sprayed Al-Based Metal Matrix Composite Coating	6
Pulsed Plasma Surfacing of Titanium Matrix Cermet Based on B4C	6
Effect of WC-10Co-4Cr Reinforcement Amount on Wear and Corrosion Resistance of Fe-Based Amorphous Coatings	6
Microstructural, Mechanical and Wear Properties of Atmospheric Plasma-Sprayed and High-Velocity Oxy-Fuel AlCoCrFeNi Equiatomic High-Entropy Alloys (HEAs) Coatings	6
SiC-YAG Coating Microstructure Optimization Through Powder Feedstock Manufacturing Process Control	6
Investigation of the Microstructural, Mechanical, and Tribological Properties of HVOF-Sprayed 434 Stainless Steel Coatings on T6061 Aluminum Alloy	6
Effect of HT Cycling in Air on Microstructure of Detonation Gun Sprayed YSZ/NiCr Coating	6
Environmentally Friendly Protective Coatings for Brake Disks	6
30 Years of Environmental Barrier Coatings: Technological Milestones, Cutting-Edge Advancements, and Future Perspectives	6
Comparing Relative Bond Characteristics Between Spherical and Elongated Morphologies for Cold Spray Process Using SPH Simulation	6
Development of Solution Precursor Plasma Spray (SPPS) Yttrium Aluminum Garnet (YAG) Coatings for Engine Components Using a High Enthalpy Cascaded Arc Gun: Part I	6
Devitrification-Induced Tailoring of Microstructure and Strength in Aluminum High-Entropy Alloy Powder for Cold Spray Deposition	6
Microstructure and Properties of the Tribaloy T-800 Coating Fabricated by Laser Cladding on the DZ125 Superalloy	6
Correction to: A Path Planning Method for Polishing Thermal Barrier Coatings on the Surface of Aero-Engine Blades Based on Point Cloud Slicing	6
Empirical and Computational-Based Phase Predictions of Thermal Sprayed High-Entropy Alloys	6
Simulating the Effects of the Native Oxide Layer During Kinetic Spraying of Tantalum Particles Using a Deep Learning Interatomic Potential	6
Microstructure Evolution and Oxidation Behavior of Thermal Barrier Coating Systems with Various Cold-Sprayed Bond Coats During Isothermal High-Temperature Oxidation Tests	6
An Advanced Methodology for Nondestructive Measurement of Thermal Barrier Coating Thickness via Point Cloud Processing	6
Real-Time Thermal Spray Process Monitoring Using Convolution Neural Network Deep Learning Architectures	6
Effects of Laser Scanning Rate and Ti Content on Wear of Novel Fe-Cr-B-Al-Ti Coating Prepared via Laser Cladding	6
Comparative Analysis of HVAF and Cold Spray Methods for Aluminum Alloy Coatings for Engine Bearings	6
Application of Cold Spray Mild Steel Coating as a Capsule for Hot Isostatic Pressing of Metal Powder	6
Microstructural Evolution and Sintering Behavior of Supersonic Atmospheric Plasma Sprayed Multi-modal YSZ Coating	6
JTST will Require a Statement of Novelty for All Submissions in 2026	6
Parameter Exploration of Yb2Si2O7 Coatings Prepared by Plasma Spray Physical Vapor Deposition (PS-PVD)	6
Enhancing Fatigue Performance of Thermal Spray Coated Titanium Alloy by Shot Peening Before Grit Blasting	6
Process Optimization of Ni60A Coating Preparation by Plasma Spraying-Cladding Technique	6
Coating of Aluminum with High Deposition Rates through Extreme High-Speed Laser Application	6
Peridynamic Simulation of Particles Impact and Interfacial Bonding in Cold Spray Process	6
Corrosion Performance of Wire Arc Deposited Zinc Aluminum Pseudo Alloy and Zinc 15 Aluminum Alloy Coatings on Steel in Chloride Environment	6
Diffusion and Dissipation of Ag in NiCrAlY-Ag Plasma-Sprayed Coating in Sliding Wear at High Temperature	6
Investigation of Effects of Plasma Parameters in Axial Suspension Plasma Spray on In-Flight Suspension Treatment and Thermal Barrier Coating Microstructure	6
Effect of Powder Particle Size on Microstructure and Mechanical Properties of Cold-Sprayed Pure Nickel Coatings	6
The Study on Flow Field Simulation and WC-12Co Multi-layer Coating Growth in High-Velocity Oxygen-Fuel (HVOF) Thermal Spraying	6
Microstructure and Properties of Chromium Boride–Chromium Carbide–Alumina Composite Coatings Prepared by Reactive Plasma Spraying	6
Correction to: Evaluation of CMAS Resistance and Failure Behavior for Phase Composite Thermal Barrier Coatings	6
Research on the Influence of Laser Power on the Microstructure and Performance of Fe-Based Coating	6
Optimization Design and Performance Verification of the CeYSZ/Al2O3 Double Ceramic Layer Thermal Barrier Coatings Structure Parameters	6
Independent Control of Particle Temperature and Velocity using a Novel Powder Preheater Design for Low-Pressure Cold Spray	5
Corrosion Performance of HVOF-deposited Ni-based Coatings in Simulated Biomass Fired Boiler Environment at 700 °C	5
Study on the Sealing Treatment and Dielectric Properties of Al2O3 Insulating Coatings	5
Flash Boiling Atomization of High-Concentration Suspensions in Suspension Plasma Spraying	5