OOIR: Observatory of International Research

Papers

(The median citation count of Polymers for Advanced Technologies is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)

Article	Citations
Low‐Cost and Green Nanofiltration Membrane Using Naringin Modified Graphene Oxide Nanoparticles for Sustainable Heavy Metal Remediation	131
A novel smart stealth sorafenib delivery system based on the magnetic imprinting material modified by polyethylene glycol	123
Preparation of flame retardant and thermal insulation polystyrene foams via high internal phase emulsion template	99
A strategy towards simultaneously improving strength and processability of polyamide 6 using bespoke dynamic covalent chain extender	93
Surface reformed anisotropic polystyrene‐block‐poly(ethylene‐ran‐butylene)‐block‐polystyrene‐graft‐maleic anhydride layer via ion‐beam irradiation for liquid crystals	92
Synergistic Enhancement of Electrical, Thermal, and Mechanical Properties in Lossy Dielectric Polymer Composites for High‐Frequency EMI Shielding Applications	92
Enabling Design of Strong and Tough Poly(Propylene Carbonate) Through In Situ Generated Poly(Propylene Carbonate)‐Based Cross‐Linked Microdomains	91
Novel sulfonated calixarenes derived crosslinker for reinforcing and toughening collagen: Relevance between structure and properties	72
Cashew tree gum exudate as a biopolymer electrolyte: The influence of glycerol plasticization	72
Promotion on the thermal and mechanical behaviors of epoxy resin using phthalonitrile and functionalized‐SiO₂	68
A study on theoretical predictive model and experimental findings of melt‐electrospinning process	66
The Key to Increasing the Elongation of Poly (l‐Lactic Acid) Monofilaments in Hydrothermal Environment‐Dislocation Slip	64
Preparation and Characterization of Amphoteric Polysaccharides Derived From Chitosan and Gellan Gum	63
Construction of Dual‐Functional Emulsion Micelle Interface With Ionic and Reactive Groups	60
Novel Nanophotosensitizers Employing Poly(Acrylamide‐Co‐N‐Isopropylacrylamide) Nanoparticles for Antimicrobial Photodynamic Therapy	59
Engineering of a 3D Printed Bilayer Artificial Skin Bio‐Mimicking Epidermis and Dermis for Skin Tissue Engineering Applications	56
Silver Sulfadiazine Encapsulated Polycaprolactone‐Zein Hybrid Nanofibers as a Wound Dressing	52
A double‐dynamic‐bond crosslinked multifunctional conductive hydrogel with self‐adhesive, remoldability, and rapid self‐healing properties for wearable sensing	49
Flame retardant and mechanical properties of core‐shell‐like polybutylene terephthalate/intumescent flame retardant through controlling injection time	48
Radiation‐sensitive nanogel‐incorporated Fricke hydrogel dosimeters with reduced diffusion rates	46
Development of efficient energy absorption components for crashworthiness applications: An experimental study	46
Evaluating the Effect of Chitosan Addition on the Color Properties of Conventional Glass Ionomer Cements	45
Enhanced crystallization of poly(lactic acid) bioplastics by a green and facile approach using liquid poly(ethylene glycol)	45
Effect of γ‐ray irradiation on epoxy network polymers with different curing agents	44
Comparative mechanical, morphological, rheological, and thermal properties of polypropylene/ethylene‐propylene‐diene rubber blends	42

Sandwich‐Architected MXene@TiO_x/PVA Composite Films With Augmented Dielectric Performance and Energy Storage Capability	40
Design of interconnected graphene loaded thermoplastic elastomeric blend composite films for minimizing electromagnetic radiation and efficient heat management	40
Investigation on mechanical, gas barrier, and biodegradation properties of graphene oxide reinforced bovine trimmings derived collagen biocomposite	39
Evaluation of transport mechanism and nanostructure of nonperfluorinated PVA/sPTA proton exchange membrane for fuel cell application	39
State‐of‐the‐art review on the high‐performance poly (ether ether ketone) composites for mechanical, tribological and bioactive characteristics	37
Bioactive Hydrogels (Bio‐HyGs): Emerging Trends in Drug Delivery and Wound Healing Applications	36
Novel bionanocomposites of chitosan‐based blend containing LaB₆: Thermal, dielectric, and biological properties	35
Flexible and Sustainable PLA/PBAT‐g‐GMA Nanocomposites Based on Carbon Nanotubes With Potential for Electrostatic Control	34
Efficient Co‐Loading of Paclitaxel and Gefitinib in PLGA Nanoparticles: Use of Design of Experiments ( DoE	32
Aminolysis of polyesters for cracking and structure clarifying: A review	32
High‐Temperature Piezoresistive Body‐Mounted Sensor Featuring Rigid and Flexible Interconnects	32
Artificial Liposomes With Internal Docking Site for Protein Delivery	31
Microwave‐Induced Surface Activation of Aramid Waste for Additively Manufactured Composite Architectures of PETG	30
Synthetic Biopolymers–Assisted Polycaprolactone Blends for Pharmacology: A Comprehensive Review With Recent Insights	30
Mechanical properties of modified aramid three‐dimensional braided composites	30
Engineering hydrophobic surface on polyethersulfone membrane with bio‐inspired coating for desalination with direct contact membrane distillation	29
Synthesis and Investigation of the Properties of Castor Oil‐Based Waterborne Polyurethane/Nanochitosan Nanocomposites With Antibacterial Properties	28
	28
Fabrication, microstructure, and nonlinear/linear optical parameters of polymeric‐based poly(vinyl alcohol)/poly(vinyl pyrrolidone) nanocomposites films for optical attenuation applications	27
Synthesis and characterization of a polycarboxylate superplasticizer modified by sodium hypophosphite	27
Preparation of PES/MMT Composites via In Situ Polymerization: Synergistic Improvement of Polymerization Rate and Crystallization Performance	27
Ranking Analysis of Tribological, Mechanical, and Thermal Properties of Nano Hydroxyapatite Filled Dental Restorative Composite Materials Using the R‐Method	27
Effects of Green Silica on Nitrile Butadiene Rubber Composite on Its Enhanced Mechanical Characteristics	27
Role of Small Fractions of Graphene Nanofillers on the Mechanical and Thermal Properties of Functionalized Cellulose Fiber‐Reinforced Unsaturated Polyester Composites	26
Effect of PA6 / PA12 Composition on the Multifunctional Behavior of PA	26
Reversible polymer networks based on polylactide with tetraphenylethane thermally dissociating groups in crosslinks	26
Sustainable Bioplastics Production From Fish Waste: Their Extraction and Applications	26
Amide polymers based on N‐phenyl‐p‐phenylenediamine with α‐olefins‐co‐maleic anhydride as multifunctional additives for lubricant application	26
Flexible Piezoelectric Sensor Based on P(VDF‐TrFE)/BiCl₃/GR Fabricated via High‐Voltage Electrospinning for Physiological Signal Monitoring	25
Enhancing endothelial differentiation of human mesenchymal stem cells by culture on a nanofibrous polycaprolactone/(poly‐glycerol sebacate)/gelatin scaffold	25
Impact of Low Molecular Weight, Biodegradable, Atactic Amorphous Poly(R, S‐Hydroxybutyrate) on Eco‐Friendly Poly(Lactic Acid)	25
Advancing Cardiac Tissue Engineering With Smart Biopolymers: From Fabrication Strategies to 4D Printing and Organoids	25
Nonisothermal crystallization of poly(L‐lactic acid) promoted by polyols	24
The thermal energy storage capacity and fire risk of phase change material based on the framework of modified melamine sponge	24
Keratin Gel From Chicken Feathers Waste Obtained by Mercaptoethanol Extraction	23
Machine Learning‐Based Design and Fabrication of Multilayered Microwave Absorber	23
Issue Information	23
Synthesis of low phosphorus flame retardant containing benzimidazole and hydroxyl and its application in reducing combustion smoke for epoxy resin	22
Mechanical and electrical properties of carbon nanotube/epoxy/glass‐fiber composites intended for nondestructive testing	22
A phosphaphenanthrene‐based derivative for simultaneously improving flame retardant and smoke suppression of epoxy resin composites	22
The in situ synthesis of weakly entangled ultrahigh‐molecular‐weight polyethylene/polyethylene wax blends and its synergetic disentanglement effect on LLDPE reinforcem	22
Poly(vinylidene fluoride) and thermoplastic polyurethane composites filled with carbon black‐polypyrrole for electromagnetic shielding applications	22
Investigation on the flame retardancy, thermal and mechanical properties of epoxy resin/cyanate ester composites based on mSiO₂@ZrPB and DOPO‐HQ	22
Issue Information	22
Antimicrobial polymeric composites in consumer goods and healthcare sector: A healthier way to prevent infection	21
Evaluation of Wear and Hardness Properties of 3D‐Printed Polylactide/Hydroxyapatite/Titania Composites	21
Influence of BN doped 2‐hydroxyethyl methacrylate phosphate coated expandable graphite on flame retardancy and thermal conductivity of styrene‐butadiene rubber composites	21
Improvement of environmental stress cracking performance, load‐carrying capacity, and UV light barrier property of polyethylene terephthalate packaging material	21
Essential oils as natural root‐repellent herbicides for drip irrigation systems	21
Heat‐resistant and transparent polyimides derived from alicyclic dianhydrides and phthalazinone‐based diamine	21

A systematic investigation of solution and technological parameters for the fabrication and characterization of poly (vinyl alcohol–chitosan electrospun nanofibers	21
Novel fluorescent nanoprobe based on hyaluronic acid and polyethyleneimine functionalized graphene oxide for detecting hyaluronidase as tumor marker	20
Biomedical applications of microfluidic devices: Achievements and challenges	20
Multicolor Thioglycolic Acid‐Modified CdTe Quantum Dot‐Based Molecularly Imprinted Polymers for Hi	20
Electrospinning of spider silk‐based nanofibers	19
Design, Synthesis, and Anticancer Evaluation of a Limonene‐Based LIM ‐ co	19
In situ photo‐crosslinked hydrogels prepared from acrylated 4‐arm‐poly(ethylene glycol)‐poly(ε‐caprolactone) block copolymers for local cancer therapy	19
Smart shape memory polymers and their significance in biomedical applications: A review	19
Issue Information	19
Manipulating a novel epoxy‐based composite with core–shell rubber particles for designing a structural adhesive in aluminum–aluminum bonded joints	19
Decontamination of methylene blue from aqueous media using alginate‐bonded polyacrylamide/carbon black nanocomposite hydrogel	19
Multifunctional Hydrogels for Biomedical Applications, By Ricardo A.Pires, IvaPashkuleva, and Rui L.Reis, Wiley‐VCH GmbH, 2022. 384 pp. €149.00 (hardback). ISBN: 9783527347162. Scope: Handbook, Refere	19
Enhancement of Interlaminar Shear Strength and Wear Resistance of E‐Glass Fiber/Epoxy Composite With ZnO Nanoparticle‐Anchored Graphene Oxide	19
Innovative Antibacterial Magneto‐Conductive Multifunctional Hydrogel From Biocompatible Materials	19
Electrospun nanofibers for drug delivery applications: Methods and mechanism	19
Thermosetting epoxidized polybutadiene/low‐molecular weight polyphenylene oxide compatible system with quite low‐dielectric constant and loss prepared through co‐curing reaction	19
Impedance Spectroscopy and Antimicrobial Activity in ZnO–Cellulose/Chitosan@Cu²⁺ Wavy‐Like Nanocomposites Formed via Semi‐Dissolved Chitosan Templating	19
Poly(Vinylidene Fluoride‐Hexafluoropropylene) Composites With Carbon Based Nanofillers for Electromagnetic Interference Shielding	19
Study of Gelatin Copolymer Hydrogel Based Polyaniline and Correlation Between Structure and Reactivity of Substituted Polyaniline Based Gelatin Solution as Gamma Radiation Dosimeters	19
3D Printing of Aluminum Alloys via Material Extrusion (MEX) Process: Challenges in Developing Acetone‐Soluble Binder Systems	18
Calculation of the macroscopic mechanical properties of polyamide 6.6 underwater influence using molecular dynamics simulations, hyperelastic material modeling of the amorphous fraction, and homogeniz	18
Using Recycled Polypropylene Waste to Fabricate Membranes for Water Treatment Applications	18
Design and preparation of a novel organic–inorganic hybrid for reducing fire hazards of epoxy	18
The role of poly(3‐hydroxybutyrate)‐based derivatives in skin, nerve, cartilage, and bone tissue engineering applications—An updated review	18
Effects of types and concentrations of modified Cloisite Clays on properties of chitosan nanocomposites for food packaging	18
Polyurethane‐based nanocomposite for catalytic reduction of toxic dyes	18
Facile fabrication of polypyrrole/NiO_x core‐shell nanocomposites for hydrogen production from wastewater	18
Recent Advances in Smart Polymeric Micelles for Targeted Drug Delivery	18
A new way to investigate the damping properties of NR/CIIR blends characterized by the rebound behaviors	18
Engineering antibacterial shrinkage‐free trinary PLGA‐based GBR membrane for bone regeneration	18
Hierarchically structured polyvinylidene fluoride core‐shell composite yarn based on electrospinning coating method to improve piezoelectricity	17
Surface‐Engineered TiO₂ Nanocomposite Latexes: Mini‐Emulsion Polymerization of High‐Solids Acrylic Coatings With Enhanced Thermo‐Mechanical and Antimicrobial Performance	17
Fatty Acid Cellulose Ester–Carboxymethyl Cellulose Blend Thermoplastics: Tailoring Thermal, Mechanical, and Water‐Soluble Properties for Eco‐Friendly Packaging	17
Bilayer Paper‐Gelatin Films With Modified Curcumin for Sustainable Packaging Applications	17
Mechanical Behavior Prediction of 3D‐Printed PLA/Wood Composites Using Artificial Neural Network and Fuzzy Logic	17
Eco‐friendly three‐dimensional hydrogels for sustainable agricultural applications: Current and future scenarios	17
Synthesis of Aluminum Oxide (Al₂O₃) Nanoparticles Decorated With Polymeric Carbon (Al₂O₃/AC) Nanocomposites for High Specific Capacitance Value	17
Thermo‐Mechanical Behavior and Shape Memory Performance of Graphene Nanoplatelets‐Reinforced Epoxy Nanocomposites	17
Study on improving the toughness of rapidly curing epoxy resin composite materials with a biobased microcrystalline cellulose	16
A theoretical model for two‐way bending behavior of bilayer shape memory polymer plate	16
Effects of Surface‐Treated Nanomagnesia on the Electro‐Mechanical Properties of Polypropylene/Ethylene‐Propylene‐Diene Monomer Blends	16
Self‐assembly and antistatic property of ionic liquid crystalline polymers	16
Curing and morphology approaches of polyurethane/poly(ethylene glycol) foam upon poly(lactic acid) addition	16
Modified Wollastonite Fibers Improve the Mechanical Properties and Sintering Properties of Polyethylene Composites	16
Aerva lanata flower extract mediated green synthesis of silver nanoparticles: Their characterization, in vitro antioxidants and antimicrobial investigations	16
Strain controlled shear hardening behavior in suspensions of alumina spheres in a polydimethylsiloxane oligomer matrix	16
Optimizing Al/SiC Nanocomposite Microstructures: An Efficient Hybrid LWO‐EPTANN Approach	16
Ag/ZIF‐8/polyacrylonitrile flexible SERS substrate with high sensitivity for the surface corrosion analysis	16
Functionalizing MXene with PEPA‐containing polyphosphazene towards highly fire‐safe polypropylene	15
Bio‐Based Strategies for Sustainable Packaging: Incorporation of Babassu Mesocarp Flour Into Poly(Lactic Acid) Films	15
Electrically Conductive Lignin Reinforced Polyacrylic Acid/Hyaluronic Acid Scaffolds With PEDOT:HA Nanoparticles	15
Issue Information	15
Amphiphilic pluronic F68 biomaterial augmented oral bioavailability and anticancer activity of genistein in lung cancer treatment	15
Magnetic Carbon Dots Based Molecularly Imprinted Fluorescence Probe for Selective Detection of Diclofenac	15
In Situ B‐gC₃N₄ Mixed Matrix Membrane Strategy for Enhanced Dye Removal: A Pathway to Exceptional Water Purification Efficiency	15
Formate dehydrogenase mimic nanoenzyme embedded cryogel for CO₂ conversion	15
Multiwalled Carbon Nanotubes Reinforced Polyvinyl Alcohol Nanocomposites: Synergistic Enhancement on Multifunctional Performance and Deep Learning‐Driven Predictions for Next‐Generation Flexible Elect	15
Thermosensitive acetylated carboxymethyl chitosan gel depot systems sustained release caffeic acid phenethyl ester for periodontitis treatment	15
The Effect of Nano‐Iron Oxide Particle on Mechanical Properties of Glass Fiber Reinforced Composites	15
Dual‐responsive polycarbonate micelles for activating intracellular drug release	15
Hydrogel Based on Starch and Poly(Ethylene Terephthalate) Recycling Products for the Slow Release of Urea	15
The introduction of the disconnection approach into polymer synthesis	14
Nanoparticles positioning effect on properties of (PS‐PANI/NiNPs) nanocomposite films	14
Enhancing Electrical and Magnetic Properties in SLA 3D Printed Resin Composites With Nano MWCNT, TiN, and c‐BN Powders	14
Isolation, screening, and characterization of polyhydroxyalkanoate (PHA)‐producing Cellulosimicrobium cellulans: A promising approach for eco‐friendly biopolymer production	14
Multifunctional Hybrid Microfibers of h‐BN/MoS ₂ Pullulan Produced by Force‐Spinning Method With Potential Use in Biomedical Applications	14
Comparative Structural and Mechanical Characterization of FDM 3D‐Printed PLA Scaffolds for Bone Tissue Engineering Applications	14
Solid polymer nanocomposite electrolytes based on poly(ε‐caprolactone)‐based waterborne polyurethane–polyethylene oxide and fluorine‐doped carbon quantum dot‐MXene	14
Polydopamine by APP Template With SiC and Silane Hybrid Coating One‐Step Co‐Deposited UHMWPE Fibers and Corona Reinforced Epoxy Composites	14
Advances in the use of electrospinning as a promising technique for obtaining nanofibers to guide epithelial wound healing in diabetics—Mini‐review	14
Microwave‐Assisted Polyborodimethylsiloxane Synthesis: Influence of PDMS Viscosities on Viscoelastic Behavior	14
Synergistic UV ‐Blocking and Bioelectronic Performance in PVDF Polymer Nanocomposites Reinforced W	14
Surface modification of polycarbonate urethane by grafting polyethylene glycol and bivalirudin drug for improving hemocompatibility	14
Evaluating the Antibacterial and Anti‐Biofilm Properties of Chitosan Nanoemulsion Containing Euphorbia hebecarpa Plant Extract Against Escherichia coli and Staphylococcus aureus	14
Preparation and UV‐curing properties of rosin‐based allyl phthalate oligomer	14
Carbonization‐dominated synergistic behaviors of ammonium hypophosphite/EG composite in improving flame retardancy of flexible polyurethane foam	14
Tailoring Cotton Textile Properties With Hybrid, Janus, and Core–Shell Electrospun Waterborne Polyurethane/Polyethyleneimine Nanofibers: Investigating Hyaluronic Acid Functionalization for Enhanced Bi	14
High‐performance shape memory characteristics by integrating urea linkages into the polyurethane elastomer	14
	13
Advancing Mechanical Properties of Polypropylene Matrix Composites: Analysis of Diverse Reinforcing Fillers	13

Dual driven mechanism (hygro‐redox) semi‐interpenetrating polymer network composite film (polyaniline‐polyacrylic acid/sulfonated poly (ether ether ketone)) for artifi	13
Issue Information	13
Thermal stability and decomposition kinetics of polybenzoxazine and oligomeric polyhedral octaphenyl silsesquioxane nanocomposites	13
Evaluation of a Photo‐Sterilizable Polyvinyl Chloride Embedded With Methylene Blue for the Inactivation of Candida albicans: A Study on Efficacy, Reusability, and Storage	13
Fabrication of piezoelectric poly(l‐lactic acid) nanofiber membranes with controllable properties	13
Effect of carbon nanotubes on curing characteristics of low energy electron beam curing CFRPs	13
Mini Review: Challenges and Promising Advances in Hydrogel‐Based Scaffolds for Breast Tissue Regeneration	13
Fabrication of biodegradable hydrogels based on chitosan and poly(azomethine‐urethane) containing phenyl triazine for drug delivery	13
Revealing Pyroelectric Capabilities: Filler‐Enhanced PVDF/PbTiO₃ Films for Improved Flexibility and Energy Conversion	13
Effect of Ionic‐Electronic Coupling on the Percolation Phenomenon of Polymer/Reduced Graphene Oxide Nanocomposite Films	13
Preface of PAT special issue for the PAT‐ICRS joint meeting	13
Investigation on the Low‐Frequency Acoustic Performance of Polymer Matrix Composite With Metallic Hollow Spheres Under Different Acoustic Stack Structures	13
UV‐initiated preparation and absorption properties of pseudo‐polyrotaxane cyclodextrin‐based PVA/poly (acrylamide‐co‐acrylic acid) hydrogel	13
	12
Aggregation‐induced emission‐active poly (β‐lactam) prepared by Staudinger polymerization as specific probe to Fe³⁺ ions and its antimicrobial properties	12
Microstructural, mechanical, thermo‐rheological, barrier, and antimicrobial properties of coextruded tri‐layer polylactide/encapsulated geraniol/polylactide‐graphene nanoplatelets films	12
Synergism of triazine containing dopamine to flame retardancy, smoke suppression, and mechanical properties of thermoplastic polyurethane/ammonium polyphosphate	12
Low‐temperature silane coupling agent modified biomimetic micro/nanoscale roughness hierarchical structure superhydrophobic polyethylene terephthalate filter media	12
Swelling poly(ionic liquid)s for demulsifying oil‐in‐water emulsion by anion exchange	12
Interpenetrating Polymer Network of Hydroxyethyl Methacrylate and Chitosan as Cryogels for Tissue Engineering Applications	12
Dragline silk fibers from golden orb‐web spider Trichonephila clavata ensure structural and mechanical robustness against ultraviolet radiation	12
Enhanced Mechanical Performance of Cement Paste Through Incorporation of a Tailored Terpolymer	12
The effect of fiber orientation and stacking sequence on carbon/E‐glass/epoxy intraply hybrid composites under dynamic loading conditions	12
Double dynamic bonds tough hydrogel with high self‐healing properties based on acylhydrazone bonds and borate bonds	12
GMP/Al₂O₃/ZnO/PDMS thermal interface materials with anisotropic thermal conductivity and electrical insulation ability obtained by	12
Ring‐opening (co)polymerization strategies of selected oxacyclic monomers to control and provide tailored polymers with desired properties	12
Vanillin and Guaiacol Based Trifunctional Polybenzoxazine Bio‐Composites for Thermal and Corrosion Resistant Applications	12
Eco‐Efficient HDPE Composites Reinforced With Ceramic Gypsum Waste: RSM‐Based Optimization and Mechanical Performance Assessment	12
Robust Dual Crosslinking Ionic Network for High‐Performance Cis‐1, 4‐Polyisoprene Latex/Sodium Alginate Composites	12
Preparation and characterization of colorless and transparent semi‐alicyclic fluoro‐containing polyimide nanocomposite films with enhanced high‐temperature dimensional stability via incorporation of c	12
A comparison of physical, morphological, and mechanical properties of bio‐polyester hybrid nanocomposites	12
Engineering of a Bilayer Film Made From Decellularized Amniotic Membrane and Emulsion for Skin Tissue Engineering Applications	12
Preparation and Characterization of Cyanate Ester Copolymers Incorporating Naphthalene and Diaryl Ether Structure	12
Comparisons of enhanced thermal neutron‐ and gamma‐shielding properties in UHMWPE composites containing surface‐treated Sm₂O₃ and Gd₂	12
Alginate functionalized MFe₂O₄ (MNi, Co) nanoparticles and hydrated salt incorporated flexible PVDF ternary nanocomposite fibers for magnetoelectric applications	12
Effect of Epoxidized Natural Rubber on the Crystallization, Thermal Stability, and Rheological Behavior of Polylactide Stereocomplexes	11
Gas Sensing With Polymeric Materials: Improved Sensitivity and Selectivity for Acetaldehyde and Formaldehyde	11
Poly(ester amide) from 6‐amino‐1‐hexanol and terephthalic acid: preparation and properties	11
	11
Ballistic performance of novel design of bulletproof plates inspired by biomimetic approaches	11
Efficient Removal of Nonrubber Components From Skim Latex via Superabsorbent Polymer Beads for Sustainable Latex Concentration	11
Design and Characterization of Preservative Free Nepafenac Loaded Polyvinyl Alcohol Nanofiber for the Treatment of Dry Eye Syndrome	11
Efficient removal of dyes by light‐responsive graphene oxide‐blended polyethersulfone nanofiltration membranes	11
Green biobased P‐N coating: Towards waste‐minimization flame retardant flexible polyurethane foam	11
Development and investigation of high‐flux antifouling NF PES membranes decorated by aniline oligomers and application for wastewater treatment	11
3D‐printable cyclic peptide loaded microporous polymers for antimicrobial wound dressing materials	11
Influence of DBD Plasma Treatment on the Immobilization and Stability of Chitosan on Polylactic Acid Surface	11
Chirality of proteinoid nanoparticles made of lysine and phenylalanine	11
Direct Comparison of Low Velocity Impact Performance of Nanoclay, Boric Acid and Interlayer Hybrid Composites	11
Preparation of polystyrene@Ni@Cu core–shell microspheres by pickering emulsion polymerization and their autonomous motion in a magnetic field applied to anisotropic conductive films	11
Effect of hydroxyapatite and pulsed electromagnetic field on osteogenic differentiation of human stem cells seeded onto 3D‐printed polycaprolactone scaffolds for future bone graft transplan	11
Structure and mechanical properties of natural rubber vulcanized with various zinc oxide nanoparticles	11
Conjugation of Anticancer Drug in Polymeric Nanosystem of Poly(Ethylene Glycol) Methyl Ether Methacrylate Brushes@Polydopamine for Controlled Drug Release	11
Synthesis, Characterization, and Cytotoxic Activity of Stable Selenium Nanoparticles‐Incorporated Carboxymethylcellulose Solution	11
Fabrication and investigation potential effect of lentinan and docetaxel nanofibers for synergistic treatment of breast cancer in vitro	11
Stepwise Surface Engineering of Sr10‐HA‐g‐PBLG Porous Microspheres: Precise Functionalization for In Situ Scaffold Formation via Dynamic Crosslinking	11
Research progress on synthetic methods and application performances of polycarboxylic acids with different sequence structures	11
Molecular dynamics simulation for chlorinated butyl rubber composite reinforced by dendritic amino‐terminated aromatic polyamide	11
Crystallization, Rheological and Thermal Properties of Stereocomplexed Polylactide After Thermal Induction	11
β‐Carotene‐reinforced Poly(methyl methacrylate): A step forward in bioactive bone cements	11
Dope‐Dyed Polyacrylonitrile Nanofibers for Outdoor Protective Textiles With Tailored Spectral Properties to Mimic Natural Leaf Reflection	11
Age resistant low density peroxide cured EPDM rubber insulation for large rocket motors	11
Preparation and characterization of pesticide Fosthiazate‐loaded microcapsules for controlled release system	11
Zinc oxide nanoparticles reinforced gelatin/starch bio‐nanocomposite film for UV‐ray protection and antimicrobial resistance	11
Highly Efficient Hydrogel Oil–Water Separation Membranes Prepared by Superhydrophilic Graphene Oxide Brushes	11
High‐Thermal Conductivity Aluminum Alloy Mold Inserts: Improving Injection Efficiency and Mechanical Properties of ABS Molded Parts	11
3D Bioprinting of Biomaterials: A Review of Advances in Techniques, Materials, and Applications	11
Correction to Preparation and Characterization of Anastrozole Nanocrystal Fast Dissolving Tablets Using Super Disintegrants and Co‐Processed Excipients for Enhanced Drug Release	11
Effect of multi‐epoxy compatibilizers with branched structures on enhancing mechanical and compatibility of PLA/starch composite	11
Cationic UV‐Curing of Shape Memory Biobased Polyurethanes Sensing Low Heat	11
Synthesis and Performance of PA/EAA Composite Latex for Paper Coating	11
Design and characterization of a novel braided biodegradable double‐J ureteral stent	11
	10
Taguchi–gray relational analysis of eccentricity and tilt of multilens module mount fabricated by injection compression molding	10
Soybean Oil‐Based Bioadhesive: An Alternative to Sutures	10
Tailoring Electrical Properties of Cellulose Acetate Polymer Composites With Surface‐Modified MWCNTs	10
Enhanced Heat Resistance and Hydrolytic Properties of Poly(3‐Hydroxybutyrate‐3‐Hydroxyhexanoate)‐Based Blends Derived From Stereocomplex Polylactides	10
Mussel‐inspired chitosan‐based hydrogel sensor with pH‐responsive and adjustable adhesion, toughness and self‐healing capability	10
Solvent‐free grafting route to develop thin and flexible polymer film from lignin	10
Hyperbranched Epoxy Resin With Flexible Siloxane Skeleton for Improving the Comprehensive Performance of Epoxy Thermosets	10
	10
The novelty role of polyamide elastomer in the determination of crosslink density and the formation of crosslink network of EPDM vulcanizates	10
3D printing continuous natural fiber reinforced polymer composites: A review	10
	10
Wood consolidation through an epoxy‐acrylic gamma‐crosslinked three‐dimensional system	10
Synthesis of guanidinium‐dendrimer‐type pDNA carriers for gene delivery into floating blood cells	10
Mechanism Insights Into High‐Performance Cu²⁺ Adsorption by ZIF‐8/PAN Nanocomposite Fibers: Coordination and Ion Exchange Dynamics	10
	10
Synthesis, curing, and degradation kinetics of polyurethanes based on poly(ethylene glycol), isosorbide, and pentamethylene diisocyanate	10
Bioactive Glass Containing Easily Injectable Hydrogels: Design Strategies and Functional Regulations for Promoting Immunomodulatory and Osteogenic Effects	10
Polyvinyl chloride surface coated with polymer brushes using a chain‐transfer reaction for enhanced fouling resistance	10
Development of PVA/sodium alginate incorporated with histidine capped silver nanoparticles for food packaging application	10
Development of nanofibers functionalized with Cyanex 272 for selective recovery of gold from printed circuit board	10
Novel biocidal polyampholytes with guanidinium and carboxy groups	10
Antistatic Easily‐Dyeable Polyethylene Terephthalate Fabric via Eco‐Friendly Plasma‐Mediated Facile Tactic	10