Journal of Laser Applications

Article	Citations
Pressure estimation via measurement of reduced light scattering coefficient by oblique laser incident reflectometry	33
Enabling laser transmission welding of additively manufactured thermoplastic parts using an expert system based on neural networks	32
Ultrashort pulse ablation of printed circuit board materials using a Bessel beam	28
Effect of laser rapid quenching on microstructure evolution and mechanical properties of 7B04 aluminum alloy	28
Selective ultrashort pulse laser processing of battery electrodes	27
Fusing optical coherence tomography and photodiodes for diagnosis of weld features during remote laser welding of copper-to-aluminum	26
High speed laser cutting of ultrathin metal foils for battery cell production	24
Influence of laser shock peening on microstructure and property of Ni60 cladding layer and the combined area of 20CrNiMo alloy	24
Laser cleaning of white composite automotive paint layers using online monitoring methods	24
Research on twin method of transient temperature field in laser additive manufacturing based on optimization of measured parameters	24
Influence of the beam diameter on the resistance of laser guards	23
Effect of a ring-shaped laser beam on the weldability of aluminum-to-hilumin for battery tab connectors	22
Polarization state and its effect on the optical neural network of a semiconductor laser in a chaos state	21
Scaling of ultrashort-pulsed laser structuring processes for electromobility applications using a spatial light modulator	19
Microstructure characteristics and cavitation erosion resistance of Co-based coating fabricated via laser cladding	19
Understanding the coaxial optical coherence tomography signal during the laser welding of hidden T-joints	19
Correlation of microstructure and phase formation with molten pool thermal history for in-situ and ex-situ laser cladding of TiC/Inconel 625 MMC coating	19
Deep learning driven multifeature extraction for quality evaluation of ultrafast laser drilled microhole arrays	17
Response surface analysis, tensile properties, and microstructure of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si fabricated by laser powder bed fusion	17
Reduction of extraneous variance in powder bed fusion with laser beam of metals by means of advanced digital preprocessing	17
Characterization of a line-shaped molten iron pool produced by a line-focused single-mode CW laser with a prism technique	16
Random lasing using laser generated and modified silver nanoparticles	16
Creation of output ports in plasmonic nanowire waveguides through laser nano-welding	16
Enhancing precision in electromagnetic force density modulation using LASER control	16
Damage characteristics of continuous-wave laser ablation triple-junction solar cells	15

Enhancement of mechanical, surface, and thermal properties of graphene reinforced aluminum metal matrix manufactured by selective laser melting	15
Prediction of single track clad quality in laser metal deposition using dissimilar materials: Comparison of machine learning-based approaches	15
Statistical modeling and optimization of clad geometry in laser cladding of Amdry 961 on Inconel 713LC superalloy with response surface methodology	15
Development of a fs-pulsed laser pretreatment process on thin-walled nickel to improve adhesion for adhesive bonding applications	15
Effect of annealing temperature on mechanical properties of welds of Ti-6Al-4V titanium alloy	15
Prediction modeling, process optimization, and property analysis of laser cladding Ni60 alloy on 56NiCrMoV7 steel	15
Research on the behavior of molten pool in laser deep-penetration welding	15
Effect of bias voltage on optically mixed two chaotic oscillators using an X-coupler device	14
Development of a laser preheating concept for directed energy deposition	14
Study on the influence of preheating conditions on the fiber laser direct writing coloring of stainless-steel surface	13
Picosecond versus femtosecond-laser ablation of silicon in atmosphere	13
Macrodimensional accuracy of Ti6Al4V parts manufactured by wire-feed high layer thickness continuous laser directed energy deposition	13
Using fiber or rod—The influence of different filler materials during CO2 laser welding of quartz glass	13
Research on a visual positioning method of paddy field weeding wheels based on laser rangefinder-camera calibration	13
High precision microscale 3D manufacturing of ultralow expansion glass by femtosecond selective laser etching	13
Robust and feasible color two-dimensional code fabricating method by nanosecond laser on titanium	13
Utilizing laser peening in mitigating hydrogen embrittlement susceptibility of TC4 titanium alloy under varying hydrogenated conditions	12
Influence of superimposed intensity distributions on weld seam quality and spatter behavior during laser beam welding of copper with green laser radiation	12
Influence of heat source model on the behavior of laser cladding pool	12
Investigation on the influence of particle size on the microstructure and properties of laser-cladded CuSn12 coatings	12
Controlling surface roughness in laser-based powder bed fusion of metals	12
Fiber laser cutting of steel plate by twin spot beam setting in scanning direction	12
Laser-assisted reduction of iron ore using aluminum powder	12
Bayesian optimization for extreme high-speed laser material deposition	12
Effect of in-source beam shaping and laser beam oscillation on the electromechanical properties of Ni-plated steel joints for e-vehicle battery manufacturing	12
Influence of intensity distributions on the process dynamics during laser deep penetration welding of pure nickel with a flexible ring mode laser source	11
Femtosecond laser etching of Li1.5Al0.5Ge1.5(PO4)3 glass using the Bessel beam	11
5-axis ultrafast laser drilling with burst mode	11
Study on the mechanism of ultrasonic-assisted laser processing carbon fiber reinforced plastics in ethanol solution	11
Effects of zirconium diboride addition on porosity reduction in laser metal deposition of tungsten carbide–cobalt cermet material	11
Online detection and source tracking of common incense burning	11
Influence of the material properties and the process parameters on the ablation behavior for the laser structuring of the diffusion media for fuel cells	11
Drilling of microhole array on aluminum foil by nanosecond laser pulses and its application in oil-water separation	11
Fine-tuning syngas composition using laser surface modified silver electrode for CO2 electroreduction	11
Back reflection analysis for sensing laser drilled through-glass vias	11
Improvement of layer fabrication efficiency and dilution rate for nickel based super alloy by multibeam directed-energy-deposition with blue diode lasers	10
Predictive modeling of lattice structure design for 316L stainless steel using machine learning in the L-PBF process	10
Analysis for temperature distribution of laser cleaning process of curved surface by numerical simulation	10
Impact of NMC 811 electrode porosity on GHz burst laser ablation characteristics	10
Multibeam laser metal deposition of pure copper on a titanium substrate with blue diode lasers for surface functionalization of dental implants	10
Ultra-short pulsed laser processing of single crystalline diamonds for tooling applications	10
Prediction of laser-welded deformation using artificial neural networks	10
Numerically verified parametric modeling of CO2 laser-induced bioheat transfer in superficial skin tumors using COMSOL Multiphysics	10
Tribute edition to Professor Jyotirmoy (Jyoti) Mazumder laser additive manufacturing from cladding to complex parts	10
Effective nanopatterning on metal by optical near-field processing using self-assembled polystyrene monolayer	10
Pulse laser cleaning of iron rust: Ablation, phase transformation, and recorrosion behaviors	10
Laser specific energy consumption: How do laser systems compare to other manufacturing processes?	10
Design and numerical assessment of an additively manufactured Schwarz diamond triply periodic minimal surface fluid-fluid heat exchanger	9
Investigating the effect of dynamic laser beam oscillations in remote fusion cutting process	9
Investigations on improving the properties of laser beam welded thick dissimilar joints of steel and aluminum by using filler material	9

Fabrication and structural modification of graphene oxide-tetraethyl orthosilicate solution via liquid-phase pulsed laser ablation	9
Investigating the influence of thermal behavior on microstructure during solidification in laser powder bed fusion of AlSi10Mg alloys: A phase-field analysis	9
Tailored microstructure in laser-based powder bed fusion of IN718 through novel beam shaping technology	9
Laser beam welding of brass with combined core and ring beam	9
Powder catchment efficiency in laser cladding (directed energy deposition). An investigation into standard laser cladding and the ABA cladding technique	9
Enhanced shear bond strength of ceramic orthodontic brackets with laser surface texturing	9
Statistical modeling in the laser cladding process of Inconel 625 via linear regression and response surface method	9
Direct observation and quantification of nanosecond laser induced amorphization inside silicon	9
Adoption of appropriate scanning strategy on selective laser melting of stainless steel 316L to enable healthy mesenchymal stem cells response	9
Process and mechanism of depositing silver paste spot via laser-induced forward transfer	8
Influence of the process speed in laser melt injection for reinforcing skin-pass rolls	8
Optimizing the dynamic performance of galvanometric scanners through advanced trajectory planning for laser material processing	8
All-fiber control-free coherent beam combining amplification of noiselike pulse toward high power supercontinuum light source	8
Optical manipulation based on the composite helico-conical beam	8
Microstructure and corrosion of SLM IN718 in 3.5% NaCl solution at high temperatures	8
Study on laser wire-filled welding process and microstructural behavior of TC4 titanium alloy	8
Cross-scale modeling and experimental research on the ultrahigh-speed laser cladding process of aluminum bronze	8
Keyhole formation driven by absorption of first-reflected laser light in laser processing based on in situ synchrotron and high-speed imaging	8
Effect of welding speed and shielding gas composition on the properties of laser welded EN AW 6061-T6 al alloy using 5356 filler metal	8
Influencing the powder particle transport in high-speed laser melt injection	8
Microstructure and mechanical properties of Ti-6Al-4V/316L dissimilar materials with FeCrCuV medium-entropy alloy transition layer by laser metal deposition	8
Examination of steel compatibility with additive manufacturing and repair via laser directed energy deposition	8
Quantitative analysis of heavy metals by laser-induced breakdown spectroscopy technique in association with temperature control and KCl additive	8
Wavelength-dependent laser fragmentation of gold microparticles in water	8
Physically interpretable crack prediction using dynamic contour point-based frequency-domain gray-level features in laser-directed energy deposition of alumina ceramics	8
Laser applications in arts and culture: An example on the construction of tiered umbrellas	8
Guiding and lasing comparison of Nd:YAG waveguide lasers fabricated by femtosecond laser inscription at 515 and 1030 nm	8
Effects of Cr and Mo content on the microstructure and properties of Fe-based amorphous composite coatings by laser cladding	8
Real-time monitoring and control of the layer height in laser metal deposition with coaxial wire feeding using optical coherence tomography	8
Multiphoton microscopy in retinal research: Advances, applications, and future directions	8
Spatial-temporal characteristics analysis of laser-induced shockwave pressure by reverse optimization with multi-island genetic algorithm	7
Influence of ultraviolet irradiation on the optical properties and biological activity of copper nanoparticles prepared by pulsed laser ablation	7
Cutting thick aluminum plates using laser fusion cutting enhanced by dynamic beam shaping	7
Influence of robot-guide strategies on the geometry of directed energy deposition components	7
Effects of WC ratios on bead size and crack initiation in forming WC-Co cemented carbides by the laser metal deposition	7
Mechanical properties and biocompatibility of Ta/Ti6Al4V composite porous structures printed using selective laser melting	7
Microstructure and properties of SLMed Ta-10W and rolled Ta-10W fiber laser welded joint	7
Effect of brazing process on microstructure evolution and mechanical properties of Ti6Al4V/ZrO2 joints after laser surface treatment	7
AI-based spatially resolved parameter prediction in laser metal deposition for increased process stability	7
Development and optimization of experimental parameters for the detection of trace of heavy metal (Cr) in liquid samples using laser-induced breakdown spectroscopy technique	7
Study on microstructures and mechanical performance of laser transmission welding of poly-ether-ether-ketone (PEEK) and carbon fiber reinforced PEEK (CFR-PEEK)	7
In situ and layer-by-layer grain size estimation in additively manufactured metal components using femtosecond laser ultrasonics	7
Automated quality evaluation for laser cutting in lithium metal battery production using an instance segmentation convolutional neural network	7
Numerical simulation study on heat and mass transfer processes in laser deep penetration welding of thin-plate copper-aluminum dissimilar metals	7
Latest developments in coaxial multiwire high-power laser cladding	7
Parametric investigation and optimization in laser based directed energy deposition of tungsten carbide-cobalt	7
UV-ultrashort pulsed laser ablation of fused silica	7
Vision transformer based cut interruption detection and prediction of laser fusion cutting from monitored melt pool images	7
Numerical analysis of the effect of an oscillating metal vapor plume on the keyhole and molten pool behavior during deep penetration laser beam welding	7
Enhancement of surface quality in powder bed fusion using a laser beam by flat-top laser beam profile control	6
Two-side percussion microdrilling method for improved hole accuracy employing a reflective mirror lens	6
Investigations on high-power laser beam welding of adapters for joining steel and aluminum for thick-walled applications in shipbuilding	6
Antibacterial effect of periodic structure formed on SUS430 by using nanosecond pulsed laser	6
Investigation of NS-single-point laser ablation of bronze under different incidence angles and pulses	6
Effect of laser welding parameters on the weld morphology and microstructure of stainless steel joints	6
Early detection and warning of standoff bio-threats using ultraviolet laser wavelengths	6
Monitoring the degree of dilution during directed energy deposition of aluminum bronze and H13 tool steel using optical emission spectroscopy	6
Process simulation and optimization of process parameters of single-pulse femtosecond laser processing Invar 36 alloy	6
Optimization of asymmetric process parameters for molten pool flow and powder divergence in multiangle laser cladding	6
Ablative laser propulsion, the propellants and measuring parameters: A brief review	6
Application of ultrafast laser beam shaping in micro-optical elements	6
Expanding the capabilities of laser-based powder bed fusion of polymers through the use of electrophotographic powder application	6
High speed coating for pure copper by multi-beam laser metal deposition method with high intensity blue diode lasers	6
Plasma plume formation at the surface of several natural silicates by mid-infrared gas laser radiation	6
Selective laser crystallization and amorphization in polymer fibers	6
Utilizing ultrafast lasers for postprocessing to improve mechanical properties of 3D-printed parts	6
Mechanism study of femtosecond laser-induced periodic surface structures on single-crystal silicon: Insights from two-temperature model and self-organization	6
Effect of incident laser wavelength on structural and morphological properties of Bi1.6Pb0.4Sr2Ca2Cu3Oy films grown by pulsed laser deposition	6
Influencing mechanism of the active elements on the surface tension of the laser cladding molten pool and the determination of the critical concentration	6
Publisher’s Note: “Research progress on heteromorphic structure parts fabricated by additive manufacturing based on inside-laser coaxial powder feeding” [J. Laser Appl. 34, 041202 (2022)]	6
In situ observation of dynamics of keyhole and molten pool in laser welding for development of spatter suppression	6
Preface to Special Topic: Laser-induced Breakdown Spectroscopy	6
Characterizing thermal energy materials using transient grating spectroscopy: A comprehensive review of principles, techniques, and applications	6
Reducing environmental risks in laser cutting: A study of low-pressure gas dynamics	6
Recovery of gold and tantalum from electronic waste using underwater laser-assisted processing in external electric fields	6
Analysis of the interactions between laser and arc due to different geometric arrangements and laser parameters in the additive manufacturing of Ti-6Al-4V	6
CFD modeling for predicting imperfections in laser welding and additive manufacturing of aluminum alloys	5
Influence of oscillating laser on forming characteristics and molten pool flow behavior of aluminum alloy double-wire additive manufacturing	5
Mechanism of the coordinated effect of laser power and oscillation parameters on laser wire additive manufacturing	5
Laser micromachining strategies for high quality perforation of thin titanium foils to produce microporous layers for polymer electrolyte membrane electrolysis	5

Effects of laser ablation of olivine on chamber optical window transmission loss and its recovery	5
Discrimination of tooth composition through temporally shaped femtosecond laser-induced breakdown spectroscopy	5
Development of all-solid-state ultraviolet lasers	5
Interpretable predictive modeling of laser cladding quality characteristics based on enhanced whale optimization algorithm-light gradient boosting machine and Shapley additive explanation	5
Influence of process parameters on the properties of AlCoCr2FeMo0.5Ni high-entropy alloy coatings produced with laser directed energy deposition	5
Influence of the inner roughness of powder channels on the powder propagation behavior in laser metal deposition	5
Femtosecond laser and spraying modified “armor-like” superhydrophobic surface for enhanced corrosion resistance of 45 steel	5
Evaluation of an ultrashort pulsed laser robot system for flexible and large-area micromachining	5
Three-dimensional annular heat source for the thermal simulation of coaxial laser metal deposition with wire	5
Numerical simulation of heat flow coupling in the molten pool of dual-spot laser welding of automotive high-strength steel	5
Laser welding in a vacuum—One process for micro to macro applications	5
High-accuracy predictive model for carbon fiber reinforced polymer laser machining quality using neural networks	5
Acoustic process monitoring during the laser beam welding of stainless-steel foils using an adjustable ring mode laser beam source	5
Monitoring of laser-arc interaction process based on selective observation of line-spectrum optical signals	5
Numerical investigation of laser doping parameters for semi-insulating 4H-SiC substrate	5
Study on the influence of processing variables under various tilting angles of laser nozzle and substrate on the deposition quality of the multi-axis laser metal deposition	5
Rapid dissolution without elemental fractionation by laser driven hydrothermal processing	5
Density prediction for selective laser melting fabricated of CuCrZr alloy using hybrid Gaussian boosted regression	5
Unified model integrating level set and modified ray-tracing methods for laser welding simulation	5
Evaluation of surface tortuosity on the corrosion resistance of organic coatings using laser texturing process	5
Laser safety design considerations for the EPAC 10 Hz petawatt laser system	5
Establishing laser cutting of components for sulfide-based solid-state batteries	5
Prediction of weld pool and keyhole geometries in high-power laser beam welding through a physics-informed generative artificial intelligence approach	5
Polarization maintaining fiber beam delivery for direct laser interference patterning	5
Identification and classification of metal copper based on laser-induced breakdown spectroscopy	5
Study on the influence mechanism of electromagnetic field on multifield coupling during the laser cladding Fe60 process	5
Process qualification, additive manufacturing, and postprocessing of a hydrogen peroxide/kerosene 6 kN aerospike breadboard engine	5