Journal of Laser Applications

Papers
(The median citation count of Journal of Laser Applications is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Laser cleaning of white composite automotive paint layers using online monitoring methods31
Behavior of melt flow and porosity formation in laser welding of steel to aluminum with cold-sprayed steel interlayer26
Understanding the coaxial optical coherence tomography signal during the laser welding of hidden T-joints23
Mathematical model to study the keyhole formation in pulsed Nd:YAG laser welding of SS 316L material and its experimental verification20
In situ observation of dynamics of keyhole and molten pool in laser welding for development of spatter suppression18
Preface to the special issue on advanced laser sensing techniques and applications18
On the surface characterization of laser treated DIN 1.2379 tool steel18
Prognostication of microstructure evolution during laser powder bed fusion of aluminum alloy using phase-field method18
Microstructure characteristics and cavitation erosion resistance of Co-based coating fabricated via laser cladding18
Polarization state and its effect on the optical neural network of a semiconductor laser in a chaos state17
Event-based vision in laser welding: An approach for process monitoring16
Spatially tailored laser energy distribution using innovative optics for gas-tight welding of casted and wrought aluminum alloys in e-mobility16
Characterizing thermal energy materials using transient grating spectroscopy: A comprehensive review of principles, techniques, and applications16
Micromachining of SiO2 single crystal wafer using femtosecond laser15
Investigation of NS-single-point laser ablation of bronze under different incidence angles and pulses15
Clinical applications of lasers in conventional periodontal care15
Fusing optical coherence tomography and photodiodes for diagnosis of weld features during remote laser welding of copper-to-aluminum15
Effect of wire feeding speed on dissimilar laser welding of NiTi shape memory alloy and 2A12 aluminum alloy14
Online detection of laser paint removal based on laser-induced breakdown spectroscopy and the K-nearest neighbor method13
Study on shear buckling failure of laser-welded dissimilar aluminum alloy (Al-Li-2099/Al-Li-S4) stiffened panel13
Early detection and warning of standoff bio-threats using ultraviolet laser wavelengths12
Influence of laser shock peening on microstructure and property of Ni60 cladding layer and the combined area of 20CrNiMo alloy12
Application of ultrafast laser beam shaping in micro-optical elements12
Enabling laser transmission welding of additively manufactured thermoplastic parts using an expert system based on neural networks11
Experimenting on semiconductors using ablative laser propulsion to investigate propulsion parameters11
Selective laser crystallization and amorphization in polymer fibers10
Utilizing ultrafast lasers for postprocessing to improve mechanical properties of 3D-printed parts10
Pressure estimation via measurement of reduced light scattering coefficient by oblique laser incident reflectometry10
Assessing the quality and productivity of laser cladding and direct energy deposition: Guidelines for researchers10
Antibacterial effect of periodic structure formed on SUS430 by using nanosecond pulsed laser10
Combination of Eulerian and ray-tracing approaches for copper laser welding simulation10
Influence of post-processing heat-treatment on the mechanical performance of AISI 410L stainless steel manufactured by the L-DED process10
Investigation of temperature distribution and melt pool microstructure in laser fusion welding of Inconel 625 superalloy9
Suppression of denudation zone using laser profile control in vacuum selective laser melting9
Effect of laser irradiation time on the surface characteristics of a carbon fiber composite9
Toward the flexible production of large-format lithium-ion batteries using laser-based cell-internal contacting9
Development and evaluation of an image processing algorithm for monitoring fiber laser fusion cutting by a high-speed camera9
Analysis of the interactions between laser and arc due to different geometric arrangements and laser parameters in the additive manufacturing of Ti-6Al-4V9
Research on twin method of transient temperature field in laser additive manufacturing based on optimization of measured parameters9
Manufacturing of high quality 3D microstructures in stainless steel with ultrashort laser pulses using different burst modes9
X-ray generation by laser ablation using MHz to GHz pulse bursts9
Scaling of ultrashort-pulsed laser structuring processes for electromobility applications using a spatial light modulator8
Development of a laser-based process to produce a hermetically sealed contacting interface for the encapsulation of temperature-sensitive electronic components8
Nanosecond pulsed laser ablation of synthetic graphite in liquids for the synthesis of spherical graphene8
Multispot laser welding for increased gap bridgability8
Fractal parameters developed to evaluate the effects of laser textured surface on oil contact angle and tribological parameters8
Bio-inspired 3D micro structuring of a liver lobule via direct laser writing: A comparative study with SU-8 and SUEX8
Weldability improvement by wobbling technique in high power density laser welding of two aluminum alloys: Al-5052 and Al-60618
Investigation on metal vapor characteristics and keyhole/melt pool dynamics in high-power laser welding with side gas flow8
Preface to Special Topic: Laser-induced Breakdown Spectroscopy8
Using photodiodes and supervised machine learning for automatic classification of weld defects in laser welding of thin foils copper-to-steel battery tabs8
Laser engineered net shape repair of Ni-base superalloy Mar-M2478
Design and construction of holmium:yttrium aluminum garnet laser for lithotripsy applications8
Laser selective ablated multistep interfacing for enhanced adhesive bonding joints of carbon fiber reinforced polymer materials8
Effect of energy on Ti plate fabrication by vacuum selective laser melting for uniformity of grain size8
Adaptive slicing in powder bed fusion of metals using a laser beam—Investigation on productivity, laser absorption, geometrical accuracy, and thermal conditions8
Expanding the capabilities of laser-based powder bed fusion of polymers through the use of electrophotographic powder application8
Efficient distortion predictions of high-performance steel alloy parts fabricated by pragmatic deposition strategies in laser melting deposition8
Reducing scatter in bent angle by a laser shock peening pretreatment8
Effect of laser radiation on the structural and optical properties of Makrolon/Pocan polymer blend8
Reducing environmental risks in laser cutting: A study of low-pressure gas dynamics7
Enhancing the efficiency of laser-based powder bed fusion of metals through the use of localized and vertically directed shielding gas flow7
Development of laser-ablated aluminum plasma plume during the irradiation of laser pulse7
Inline failure detection in laser beam welding of battery cells: Acoustic and spectral emission analysis for quality monitoring7
Laser Gaussian beam analysis of structure constant depends on Kolmogorov in turbulent atmosphere for a variable angle of wave propagation7
Fatigue properties of thick section high strength steel welded joint by hybrid fiber laser-arc welding7
Characterization of optical emissions during laser metal deposition for the implementation of an in-process powder stream monitoring7
Effect of a ring-shaped laser beam on the weldability of aluminum-to-hilumin for battery tab connectors7
Process development and heat flow analysis for thin walls made of aluminum using extreme high-speed laser material deposition (EHLA3D)7
Laser soldering of nickel plated steel sheets7
Comparison of melting efficiency between blue, green, and IR lasers in pure copper welding7
Rapid detection and discrimination of plant leaves using laser-induced breakdown spectroscopy7
Monitoring the degree of dilution during directed energy deposition of aluminum bronze and H13 tool steel using optical emission spectroscopy7
Publisher’s Note: “Microstructure and mechanical properties of Ti-6Al-4 V/316L dissimilar materials with FeCrCuV medium-entropy alloy transition layer by laser metal deposition” [J. Laser Appl. 35, 037
Development of embedded graphitic-sandwich structures in single-crystal synthetic diamond via ultrafast laser micromachining7
Recovery of gold and tantalum from electronic waste using underwater laser-assisted processing in external electric fields7
Fabrication of frequency-selective surface by picosecond laser direct writing7
Influence of plume attenuation under high power laser welding of copper using visible wavelengths6
Publisher’s Note: “Research progress on heteromorphic structure parts fabricated by additive manufacturing based on inside-laser coaxial powder feeding” [J. Laser Appl. 34, 041202 (2022)]6
Sustainable laser metal deposition of aluminum alloys for the automotive industry6
Development of high intensity multibeam laser metal deposition system with blue diode lasers for additively manufacturing of copper rod6
Laser additive manufacturing of TI-6AL-4V alloy at a high deposition-rate using a rectangular laser spot6
Uneven hardness mechanism and related fracture characteristics in laser-MIG hybrid welded Al–Mg–Si alloy butt6
Optical cubic nonlinearity of copper oxide thin films synthesized by reactive pulsed laser deposition6
Acoustic process monitoring during the laser beam welding of stainless-steel foils using an adjustable ring mode laser beam source6
Material loss analysis in glass additive manufacturing by laser glass deposition6
Ultrashort pulse ablation of printed circuit board materials using a Bessel beam6
High speed laser cutting of ultrathin metal foils for battery cell production6
High deposition rate welding with a laser line optics with the laser-assisted double-wire deposition welding process with nontransferred arc6
Influencing mechanism of the active elements on the surface tension of the laser cladding molten pool and the determination of the critical concentration6
Damage characteristics of continuous-wave laser ablation triple-junction solar cells6
Optical investigation of the effect of laser radiation on lignosulfonate–polyvinyl alcohol/nickel oxide nanocomposite membrane6
High speed coating for pure copper by multi-beam laser metal deposition method with high intensity blue diode lasers6
Analysis of the springback effect of laser welded DP600 high-strength steel thin sheets6
Investigations on the formation of pores during laser beam welding of hairpin windings using a high-speed x-ray imaging system6
Prediction of residual stress and deformation of build part with variation of hatch spacing in direct metal laser sintering of AlSi10Mg built part: Thermo-mechanical modeling6
Pulsed laser welding and microstructure characterization of dissimilar brass alloy and stainless steel 308 joints6
Use of carbon black powder for surface treatment of stainless steel substrates via a low-cost CO2 laser5
Distribution of laser cladding powder concentration on the substrate base on 3D curved surface fitting5
Response surface analysis, tensile properties, and microstructure of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si fabricated by laser powder bed fusion5
Multi-objective optimization of key process parameters in laser cladding Stellite12 cobalt-based alloy powder5
Investigation of precession laser machining of microholes in aerospace material5
Modeling and multiobjective optimization of thermal effects of fiber laser cutting of Inconel 600 sheet by employing the ANN and multi-objective PSO algorithm5
Doppler diagnostics of laser evaporation of biological tissues5
Optimization of micropore fabrication on the surface of ultrathick polyimide film based on picosecond UV laser5
Publisher’s Note: “Material incorporation in powder sheet additive manufacturing toward lightweight designs for future mobility” [J. Laser Appl. 36, 022026 (2024)]5
Welding between confinements as a new approach for high deposition rate additive manufacturing with laser-assisted double wire welding with nontransferred arc5
Welding electrical connections between battery sheet metal materials and additively manufactured (AM) aluminum components: The effect of surface roughness5
Laser fiber cleave: Modeling and fundamentals5
Regulation mechanism of mechanical properties on laser welding-brazing joint for aluminum alloy and steel via surface texture and AlSi12 precoating5
Development of all-solid-state ultraviolet lasers5
Influence of MHz bursts on the ablation efficiency of fused silica5
Evaluation and suppression of PET damage in the UV nanosecond laser ablation of an SS304 circuit on a metal/resin composite film5
Melt pool dynamics on different substrate materials in high-speed laser directed energy deposition process5
Development of a laser preheating concept for directed energy deposition5
Challenges in dynamic heat source modeling in high-power laser beam welding5
Laser writing of memristive logic gates and crossbar arrays5
Additive manufacturing between cooled confinements with the LDNA process5
Experimental evaluation of a WC–Co alloy layer formation process by multibeam-type laser metal deposition with blue diode lasers5
Additive manufacturing of polyamide 12 bulk structures using directed energy deposition with a thulium laser: Effect of process conditions on morphology and mechanical performance5
Investigation of microstructure evolution on different planes in laser welding of aluminum alloy5
Statistical modeling and optimization of clad geometry in laser cladding of Amdry 961 on Inconel 713LC superalloy with response surface methodology5
Effect of incident laser wavelength on structural and morphological properties of Bi1.6Pb0.4Sr2Ca2Cu3Oy films grown by pulsed laser deposition5
Laser biospeckle contrast measurements stimulated from liposomal nanocarriers incubated in vitro model cancer cells: A proven promising tool in clinical therapy5
Welding of pure copper wires using a hybrid laser system with a blue diode laser and a single-mode fiber laser5
Effect of femtosecond laser processing parameters on microstructures and wetting properties of copper surface5
Study of burst mode for enhancing the ps-laser cutting performance of lithium-ion battery electrodes5
Numerical investigation of laser doping parameters for semi-insulating 4H-SiC substrate5
Effects of beam oscillation on porosity and microstructure of laser welded TC11 titanium alloy5
Research on the behavior of molten pool in laser deep-penetration welding5
Interlayer-free laser coating of AISI H11 tool steel for H11/Cu composite material5
High-speed formation of pure copper layers via multibeam laser metal deposition with blue lasers4
Process simulation and optimization of process parameters of single-pulse femtosecond laser processing Invar 36 alloy4
Velocity-based closed-loop control in fusion laser cutting for multi-directional and curved geometries4
Polarization maintaining fiber beam delivery for direct laser interference patterning4
Development of wavelength dispersion measurement method using Fresnel reflection of fiber under test at both end faces4
Analysis and simulation of laser swing welding process for stainless steel stacked joints4
Additive manufactured of pure copper by blue diode laser induced selective laser melting4
Fiber laser cutting of steel materials with twin spot beam-twin spot setting in kerf width direction4
Experimental and numerical simulation analysis of laser paint removal of aluminum alloy4
Prediction of temperature distribution around fusion zone in fiber dissimilar laser welding of AISI 304 and AISI 420: A wavelet network nonlinear ARX model4
Hybrid laser cleaning characteristic of marine barnacles fouling attached on Al alloys4
Laser bonding of conductive tracks on textiles with adapted wavelengths for smart textile applications4
Optimizing laser ablation in liquid: The role of ablation region confinement4
Random lasing using laser generated and modified silver nanoparticles4
High precision microscale 3D manufacturing of ultralow expansion glass by femtosecond selective laser etching4
Enhancing precision in electromagnetic force density modulation using LASER control4
New method for high-efficiency keyhole-based wire direct energy deposition: Process innovation and characterization4
Comparison of QCW pulsed laser and single-mode CW laser on the welding of power cell lugs4
Macrodimensional accuracy of Ti6Al4V parts manufactured by wire-feed high layer thickness continuous laser directed energy deposition4
Multiplexing research and robustness analysis of a multiparameter heterogeneous fiber sensor network4
Dissimilar laser spot welding of aluminum alloy to steel in keyhole mode4
Laser-assisted synthesis of Ag–Cu alloy nanoparticles with tunable surface plasmon resonance frequency in presence of external electric field4
Eddy current detection of laser-dispersed markers as a new approach to determining the position of load supporting means4
Ablative laser propulsion, the propellants and measuring parameters: A brief review4
Investigating the ability of deep learning to predict welding depth and pore volume in hairpin welding4
Prediction and optimization of joint quality in laser transmission welding using serial artificial neural networks and their integration with Markov decision process4
Review of current state of technologies enabling circular economy in vehicle batteries and a role of laser processing and remote operation via metaverse4
Effect of laser surface melting on microstructure and properties of Mg-1Mn-2Zn alloy4
Prediction modeling, process optimization, and property analysis of laser cladding Ni60 alloy on 56NiCrMoV7 steel4
Development of a fs-pulsed laser pretreatment process on thin-walled nickel to improve adhesion for adhesive bonding applications4
Laser microwelding of stainless steel and pure aluminum foil4
Laser welding of copper to aluminum with spiral trajectory and identification of excessive aluminum melting4
Dissimilar laser welding of copper and aluminum alloys in multilayer configuration for battery applications4
Submicrometer surface shaping and surface repair of metals via laser ablation4
Copper signal characteristics using collinear LS-DP-LIBS for underwater measurement3
Extreme output power emitted by commercial laser pointers in Greece: A solely local or a global issue?3
Influence of the laser-induced plume on welding behavior in keyhole welding for stainless steel using a 16 kW disk laser3
Effect of laser power on corrosion behavior of GO/Ti-6Al-4V coating in simulated body fluid solution3
Influence of process parameters in blue laser welding of copper and aluminum thin sheets3
Wear resistance of laser cladding Fe50Cr40Si10 coating on AISI 1045 steel in elevated temperature3
Research on hot cracks and microstructure of Inconel 100 by laser micromelting repairing3
Texturing skin-pass rolls by high-speed laser melt injection, laser ablation, and electrolytic etching3
Laser interaction in a water tank configuration: Higher confinement breakdown threshold and greater generated pressures for laser shock peening3
Influence of the spatial laser energy absorption on the molten pool dynamics in high-power laser beam welding3
Resilience of laser powder bed fusion additive manufacturing to programmatically induced laser power anomalies3
Surface wettability patterning of metal additive manufactured parts via laser-assisted functionalization3
Study on the influence of processing variables under various tilting angles of laser nozzle and substrate on the deposition quality of the multi-axis laser metal deposition3
Aluminum alloy oxidation prediction during laser welding process based on random forest regression analysis of spectral signals3
Study on the molten pool behavior and porosity formation mechanism in dual-beam laser welding of aluminum alloy3
New approach for multi-material design: Combination of laser beam and electromagnetic melt pool displacement by induced Lorentz forces3
Experimental evaluation of the metal powder particle flow on the melt pool during directed energy deposition3
Discrimination of tooth composition through temporally shaped femtosecond laser-induced breakdown spectroscopy3
Prediction of single track clad quality in laser metal deposition using dissimilar materials: Comparison of machine learning-based approaches3
Preparation of Ag-Cu nanoparticle film using a dual-beam pulsed laser deposition for power electronic packaging3
Comparison and analysis of hyperspectral temperature data in directed energy deposition3
Simultaneous detection of heavy metals in solutions by electrodeposition assisted laser induced breakdown spectroscopy3
Synthesis of bimetallic core/shell nanoparticles via pulse laser ablation and their catalytic effectiveness in dye degradation3
Effect of low-level laser therapy on neurorehabilitation: A narrative review3
Laser polishing of metallic freeform surfaces by using a dynamic laser beam preforming system3
Picosecond laser structuring of graphite anodes—Ablation characteristics and process scaling3
Feasibility study of dissimilar metal joining by laser riveting of Ti-6Al-4V to AA60613
Corrosion behavior of laser-cladding NiCrBSi coating in molten aluminum alloy3
Effects of structure parameters on performances of laser powder bed fusion processed AlSi10Mg body-centered cubic lattices3
Effect of ultrasonic vibration on microstructural evolution, clad defects, and surface properties in laser direct energy deposition of Inconel 6253
Impact on surface topography of interference patterned steel and brass using an ultrashort pulsed laser source3
Blue, green, red luminescence and infrared response of green synthesized graphene oxide nanoparticles obtained by control numeric assisted laser ablation from lemon peels3
Laser lap joining of high-strength steel to aluminum with cold sprayed steel coating3
Influence of the inner roughness of powder channels on the powder propagation behavior in laser metal deposition3
Design and fabrication of personalized knee prostheses by laser-based powder bed fusion: Influence of manufacturing process on geometric accuracy3
Leveraging machine learning for predicting and monitoring clogging in laser cladding processes: An exploration of neural sensors3
Nanosecond laser high-precision fabrication of microgrooves on TC4 surface: Morphology simulation and drag reduction performance of microgrooves3
Numerical analysis of the effect of energy distribution on weld width during oscillating laser welding of aluminum alloy3
Absorption of tailored laser beams within 3D laser cutting kerfs3
Simulation and prediction of the temperature field of copper alloys fabricated by selective laser melting3
Investigation on laser forming of open cell aluminum foam3
Laser hazard classification of a line laser with an astigmatic extended source3
Individualized and controlled laser beam pre-treatment process for adhesive bonding of fiber-reinforced plastics. III. Effects of contaminants3
Experimental measurement of the powder flow velocity in a three-port coaxial laser metal deposition nozzle by high-speed imaging3
Influence of the laser beam parameters in the laser assisted double wire welding with nontransferred arc process on the seam geometry of generatively manufactured structures3
Stress sensitivity analysis of laser quenching based on regression model3
Research of melting state identification and process performance based on selective laser melting acoustic signals3
Study on powder dynamics of ultrahigh-speed laser cladding3
High repetition ultrafast laser ablation of graphite and silicon/graphite composite electrodes for lithium-ion batteries3
Deep learning driven multifeature extraction for quality evaluation of ultrafast laser drilled microhole arrays3
Laser microdrilling of CFRP with a nanosecond-pulsed high-power laser3
Effect of the laser-induced vapor in the keyhole on the weld surface roughness in fiber laser welding3
Optimization of processing parameters of ultrashort (100 fs–2 ps) pulsed laser shock peening of stainless steel3
Mathematical modeling and design for six sigma3
Picosecond versus femtosecond-laser ablation of silicon in atmosphere2
Influence of temperature and beam size on weld track shape in laser powder bed fusion of pure copper using near-infrared laser system2
High-accuracy predictive model for carbon fiber reinforced polymer laser machining quality using neural networks2
Laser welding process and temperature field analysis of aluminum alloy thin-walled tube2
Laser-assisted dry printing eco-friendly paper-based humidity and temperature sensors2
Cooling rate and dendrite spacing control in direct metal deposition printed Cu-Fe alloys2
Effects of Ar-He shielding gas mixture on mechanical and metallurgical properties of weld metal in laser welding of 6061 T6 aluminium alloy2
Study of the effects of stress wave behavior in laser-induced exit-surface damage of fused silica using time-resolved multi-polariscopic imaging2
Numerical investigation of molten pool dimension, temperature field and melting flow during pulsed laser welding of Ti-6Al-4V alloy sheets with different thicknesses2
Evaluation of surface tortuosity on the corrosion resistance of organic coatings using laser texturing process2
Relating vapor emissions to melt pool behavior during laser processing2
Laser cladding: A high-speed-imaging examination of powder catchment efficiency as a function of the melt pool geometry and its position under the powder stream2
Numerical simulation of thermal evolution and grain morphology of laser melted AlSiTiNiCo-WC composite coatings2
Influence of the material properties and the process parameters on the ablation behavior for the laser structuring of the diffusion media for fuel cells2
Effects of zirconium diboride addition on porosity reduction in laser metal deposition of tungsten carbide–cobalt cermet material2
Identification of solidification cracking using multiple sensors and deep learning in laser overlap welded Al 6000 alloy2
Influence of ring-shaped beam profiles on spatter characteristics in laser-based powder bed fusion of metals2
Material incorporation in powder sheet additive manufacturing toward lightweight designs for future mobility2
Research on melting behavior of coaxially fed powder in diode laser cladding process2
Fiber laser cutting of steel plate by twin spot beam setting in scanning direction2
Investigations on laser beam welding of thin aluminum foils with additional filler wire2
Novel numerical simulation method for quasi-continuous wave laser processing of carbon-carbon composites and its application in parameter inversion2
Powder degradation as a consequence of laser interaction: A study of SS 316L powder reuse on the laser directed energy deposition process2
Numerical and experimental investigation of the melt removal mechanism and burr formation during laser cutting of metals2
Density prediction for selective laser melting fabricated of CuCrZr alloy using hybrid Gaussian boosted regression2
Layer detection in ultrashort pulsed multilayer laser ablation by analyzing ultrasonic process emission2
Evaluation of the corrosion performance of selective laser melted 17-4 precipitation hardening stainless steel in Ringer’s solution2
Influence of oscillating laser on forming characteristics and molten pool flow behavior of aluminum alloy double-wire additive manufacturing2
Establishing laser cutting of components for sulfide-based solid-state batteries2
Effects of laser ablation of olivine on chamber optical window transmission loss and its recovery2
Experimental evaluation of poly methyl methacrylate-acrylonitrile butadiene styrene transmission welding using mold-integrated simultaneous laser welding technology2
0.067644119262695