OOIR: Observatory of International Research

Papers

(The TQCC of Numerical Heat Transfer Part A-Applications is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-10-01 to 2025-10-01.)

Article	Citations
Numerical simulation study on erosion characteristics of desulfurization slurry using shell-and-tube heat exchanger for low-grade waste heat utilization	75
Numerical study of natural convective heat transfer of nanofluids within a porous corrugated triangular cavity in the presence of a magnetic field	58
Xue and Maxwell numerical simulations for improved heat transmission in cylindrical film flow: A solar energy application	50
Effect of topographical pattern on vortex shedding and heat transfer phenomena in power-law fluid flow around a rotating cylinder	49
High porosity metal foam attachments for enhancing heat transfer from exhaust flue gases	49
A study on flow and heat transfer characteristics of manifold microchannels based on lattice Boltzmann method	48
Numerical simulation of radiative flow with magnetized micropolar nanofluid along a curved stretched surface involving blood silica nanoparticles	47
The Keller box numerical scheme for the transient MHD Casson Nanofluid flow with heat generation and chemical reaction	44
Radiative ternary nanoliquid flow over an exponentially stretching sheet with motile oxytactic microorganisms	41
Temperature response in skin tissue during hyperthermia based on three-phase-lag bioheat model using RBF meshfree method	37
Optimization and thermodynamic analysis of rib arrangement and height for microchannels with sharkskin bionic ribs	35
Numerical investigation of the flow and thermal behavior of impinging single and multi-orifice synthetic jets with different waveforms	33
Computational study on transient thermal performance enhancement of phase change materials in triplex tube heat exchanger through novel annular-finned configurations	33
Dynamic response of a 1D semi-infinite piezoelectric rod with fractional order generalized thermoelasticity	32
Exploiting the flow maldistribution characteristics in parallel microchannel heat sinks of I, U, and Z configurations to tackle the nonuniform heat loads	32
A comparative study of heat absorption and chemical reaction on MHD flow with fractional derivatives	32
Transient heat transfer modeling of an ice on coil thermal storage system with boiling heat transfer process of a refrigerant for diary preservation application	31
Reduction of heat load in an air-conditioned bus employing phase change material integrated glass window and roof: A coupled numerical and analytical approach	30
Response surface methodology for characterization of wind effect on combined convective loss from a bicylindrical cavity receiver	30
Mixed convection magnetohydrodynamic flow of hybrid nanofluid over a spinning sphere with nonlinear thermal radiation: Keller-Box approach	29
Effect of functionalization on adsorption and thermal property of graphene nanosheet/paraffin composite	28
Research on mine heat exchange system and its heat exchange performance prediction	28
Thermal convective transport of nanofluids in a microannulus under electromagnetohydrodynamic and time-periodic pressure gradient	27
Natural convection from solid and hollow cylinders with concave surface: A numerical approach	26
Influence of various shape factors on a hybrid nanofluid flow over a convectively heated exponential stretching sheet with exponential heat source and activation energy: An irreversibility analysis	26

Enhanced thermal performance of the solidification process of nanopowder-phase change material-based latent thermal unit: Heat management	26
Convective flow of hybrid nano particles in combination of TiO ₂ +CuO/engine oil MoS ₂ +ZnO/engine oil and Al ₂	26
Numerical paradigm to explore the chemically reacting Williamson nanofluid flow with the influence of bioconvection effects using neural networks	24
Thermal performance of a moving fully wet porous longitudinal inclined fin of inverted exponential profile with convective-radiative heat transfer	24
Unsteady tetra hybrid nanofluid in MHD flow between two parallel rotating stretchable disks under chemical reaction and activation energy effects	23
Entropy analysis of unsteady MHD nanofluid flow over a stretching surface with effects of variable viscosity and nonuniform heat generation	23
Entropy analysis of double diffusion in a Darcy medium with tangent hyperbolic fluid and slip factors over a stretching sheet: Role of viscous dissipation	23
RSM-based sensitivity analysis of hybrid nanofluid in an enclosure filled with non-Darcy porous medium by using LBM method	23
Comparative study of hybrid nanofluid flows over a bidirectional stretched surface with the impact of Hall current and ion slip	23
Numerical and optimal thermal analysis of non-Newtonian fluids flow over a wedge by using response surface methodology (RSM): Sensitivity analysis	22
Structure optimization of straight cone nozzle and its effect on jet impingement heat transfer	22
Numerical analysis of the comprehensive effect of continuous casting process parameters on the continuous casting billet remelting	22
Research on thermal performance and pressure loss of a new perforated-folded baffle solar air collector	21
Influence of oblique angle variations on the thermo-hydraulic characteristics of the oblique fin heat sink with Al₂O₃ water nanofluid	20
Buoyancy-induced convective flow and heat transfer over obstacles embedded inside a Cu–water nanofluid-saturated porous cavity	20
Thermal management of honeycomb heat sink filled with phase change material for smart lighting applications	20
Dynamic response of a spherical cavity under thermal and chemical shock with fractional thermoelastic diffusion theory	20
A new look in heat balance integral method to a two-dimensional Stefan problem with convection	20
Investigation of contact thermal resistance at the probe-sample interface in scanning thermal microscopy based on the fractal network model through numerical analysis	20
Modeling of artificial neural network to analyze heat and mass transfer of ternary hybrid nanofluid between two parallel plates with inclined magnetic field	20
Optimal characteristics of natural convection in a square porous-nanofluid-filled enclosure containing three tubes	20
Heat transfer inside a horizontal circular enclosure with a heated semi-circular cylinder at different orientations	20
Experimental comparison and CFD analysis of conventional shell and tube heat exchanger with new design geometry at different baffle intervals	19
Dissipated-radiative compressible flow of nanofluids over unsmoothed inclined surfaces with variable properties	19
Influence of Joule heating and magneto-hydrodynamic on double diffusion mixed convection in a cavity with liquid sodium-potassium alloy and discrete thermosolutal source	19
Effect of aspect ratio and nonuniform temperature on mixed convection in a double lid-driven cavity	19
Thermal management and develop energy storage in performance improvement of triangular and cubical parabolic collectors	18
Investigating the impact of variable aspect ratio cathode flow field on temperature distribution and performance in a PEM fuel cell	18
Development of solver with user interface for surface radiative exchange based on OpenFOAM platform	18
Numerical treatment of heat recovery steam generator harps constructed from multiple tube bundle configurations	18
Investigation of optimal utilization of solar energy in electric vehicles: An economical and low carbon growth perspectives	18
Consequences of an inclined magnetic field and variable viscosity on Williamson blood nanomaterial with bioconvection phenomena passing through peristalsis geometry	18
Model reduction of radiative heat transfer by a hierarchical radiosity method	18
Effects of elasticity and waviness of the conductive panel surface on the cooling performance and entropy generation by using nano-enhanced multiple impinging jets	18
Motion characteristics and residence time of particles in the new cross structure under constant-pulse condition	18
Enhancing heat transfer performance in elliptical tubes with nano fluids: A numerical case study	17
Heat and mass transfer phenomenon and aligned entropy generation with simultaneous effect for magnetized ternary nanoparticles induced by ferro and nano-layer fluid flow of porous disk subject to moti	17
Comparison of convective heat transfer in metal foam-filled channels of three different cross-sections	17
Magneto-thermo-gravitational Rayleigh–Bénard convection of an electro-conductive micropolar fluid in a square enclosure: Finite volume computation	17
Entropy analysis of Darcy-Forchheimer flow of Reiner-Rivlin A1 ₂ O ₃ –Cu/engine oil based hybrid nanofluid between two rotating di	16
Methodology for determining convective heat transfer coefficients on the tubesheet surface of shell-and-tube heat exchangers under single-phase flow	16
MHD Couette flow and heat transfer in a rotating channel in presence of viscous dissipation and heat source/sink	16
Second law analysis of thermo-magneto-hydrodynamic couple-stress fluid flow in a cavity with heated fin	16
Influence of the Reynolds viscosity model and induced magnetic field on a thin Casson fluid film flow between two rotating disks with cross-diffusion effects	16
Three-dimensional swirling flow of a ternary composite nanofluid induced by the torsional motion of a cylinder considering non-Fourier law	16
An innovative cost-effective numerical-analytical procedure to derive heat correlations for shell and tube heat exchangers equipped with smooth and dimple tubes	16
A numerical study on contact conditions, dynamic resistance, and nugget size of resistance spot weld joints of AISI 1008 steel sheets	16
Influence of shape factor on a chemically reactive hybrid nanofluid flow via a moving plate when Soret and Dufour effects are significant: An irreversibility analysis with Cattaneo-Christov heat flux	16
Darcy–Brinkman model for Boussinesq–Stokes suspension tetra dusty nanofluid flow over stretching/shrinking sheet with suction/injection	15
Thermo-fluidic and entropy generation analysis of MPCMS in straight, segmental, and rib-groove microchannel heat sinks: A numerical investigation	15

Nonlinear convective nanofluid flow in an annular region of two concentric cylinders with generalized Fourier law: An application of Hamilton-Crosser nanofluid model	15
Numerical simulation of liquid water transport in ordered microstructures gas diffusion layer of proton exchange membrane fuel cell	15
Zeta potential and activation energy effects in an EMHD non-Newtonian nanofluid flow over a wedge with Darcy-Forchheimer porous medium	15
Nonintrusive thermal contact conductance estimation in double-layered pipelines: A reciprocity functional method perspective	15
Simulation of CuO-water nanofluid flow for cooling of solar photovoltaic module	15
Analysis of active and passive control of fluid with fractional derivative	15
Numerical analysis of heat transport in Nd: YAG laser-irradiated dental tissue with variable physical parameters	14
Natural convection due to lateral uniform heat flux in a slender porous cavity saturated with nanofluid: Departure from LTE state	14
Three-dimensional flow of hybrid nanofluid through Darcy-Forchheimer porous surface: A Legendre wavelet collocation approach	14
Nonlinear free convective pulsatile magnetohydrodynamic flow in a nonlinearly radiated and Ohmic heated porous channel filled with third-grade fluid properties and combinations of nanoparticles: Entro	14
Numerical investigation of effective thermal conductivity of gas diffusion layer of the PEM fuel cell	14
Nonlinear natural convective nanofluid flow past a vertical plate	14
Effects of MHD and thermal radiation on non-Newtonian fluid with Cattaneo–Christov heat over a stretching flow surface	14
Thermal optimization of nanoparticles in magnetohydrodynamic radiative flow with joule heating due to two parallel rotating disks	14
Numerical modeling of bioconvection and heat transfer analysis of Prandtl nanofluid in an inclined stretching sheet: A finite difference scheme	14
Insight into the bidirectional dynamics of hyperbolic tangent hybrid nanomaterial subject to Nield’s conditions using numerical approach	14
Heat transfer in MHD convective stagnation point flow over a stretching surface with thermal radiations	14
Application of acoustic vibration promotes heat transfer of high-viscosity fluid in a container	13
A numerical study on the effect of rib size and location on thermo-fluid performance of synthetic jet	13
Mixed convection MHD boundary layer flow, heat, and mass transfer past an exponential stretching sheet in porous medium with temperature-dependent fluid properties	13
New insights on gaseous flow and effect of eddies on heat flux removal - a molecular dynamics study on free-convective heat transfer at sub micro-scale	13
Impact of vibration on heat transfer and flow properties of heat exchange surfaces	13
Numerical investigation for enhancement of heat transfer in the cooling water jacket of CI engine	13
Effective thermal performance assessment for prismatic triangular solar air heater integrated with fins and turbulators	13
Reiner Rivlin fluid flow between rotatable stretching disks with Cattaneo Christov heat transport	13
Numerical solutions for magneto-convective boundary layer slip flow from a nonlinear stretching sheet with wall transpiration and thermal radiation effects	13
Numerical and experimental studies of flow and heat transfer characteristics in a plate heat exchanger with multi-chevron corrugate furrows	13
Optimization for dense location and geometrical parameter of wavy microchannel to improve temperature distribution	13
Magnetic field impact on free convection of a nanofluid in a cavity with corrugated walls and having V-shaped baffles	13
Heat transfer enhancement for outlet part of the bionic microchannel by various concise rib configurations	13
Model-based comparison of hybrid nanofluid Darcy-Forchheimer flow subject to quadratic convection and frictional heating with multiple slip conditions	13
Natural convection heat transfer from a uniform wall temperature, vertical barrel-shaped solid/hollow cylinder to air in infinite surroundings: A numerical study	13
An effective thermal conductivity model for the three-phase porous media based on the numerical simulation	13
Evaluation of the glioblastoma multiforme treatment with hyperthermia using the finite element method	13
Impact of wall temperature difference on heat and mass transfers in gray and non-gray gas mixtures	13
Thermal conductivity of quasi-bilayer graphene without and with perfluorophenylazide molecules	13
MHD free convective Casson fluid flow in an inclined square cavity with moving upper wall	13
Numerical simulation of bio-magnetic nanofluid flow in the human circulatory system	13
The design and operation optimization for conductive rubber heated snow melting bridge deck pavement	12
Correction	12
Heat transfer analysis of MHD viscous nanofluid flow over a nonlinearly stretching sheet with heat source/sink: A numerical study	12
Influence of heat flow due to concentration gradient on unsteady MHD heat and mass transform dissipative flow with spanwise fluctuating temperature	12
Numerical analysis of combined free convection and radiation heat transfer from an open hemispherical cavity	12
A passive modeling strategy of steady MHD reacting flows for convectively heated shear-thinning/shear-thickening nanofluids over a horizontal elongating flat surface via Wakif’s-Buongiorno approach	12
Applications of Soret and Dufour effects for Maxwell nanomaterial by convectively heated surface	12
Thin film flow of chemically reactive nonlinear thermally radiative magnetized variable viscosity fluid over a stretchable surface with non-uniform heat source/sink and Fick’s mass flux theory	12
Effects of flow regime and geometric parameters on the performance of a parabolic trough solar collector using nanofluid	12
Operating mechanism of pulsating heat pipe with different wettability from the perspective of thermo-hydrodynamic characteristics of vapor–liquid interface region	12
Effects of Stefan blowing on mixed convection heat transfer in a nanofluid flow with Thompson and Troian slip	12
Hydrothermal properties with entropy generation effects on a hybrid nanofluid considering thermal radiation on a stretching/shrinking sheet	12
Multiple slip nonlinear radiative bioconvective flow of nanofluid with variable thermal conductivity	12
Dynamics of Ohmic heating and aligned magnetic field on a nanofluid flow between two coaxial cylinders with rotation effect	12
Computation of natural convection heat transfer from an infrared suppression device (IRS) with multiple louvered cylindrical funnels	12
Effect of mechanical vibration and its influence on thermal performance of a nanofluid heat exchanger	12
Sodium alginate-based MHD ternary nanofluid flow across a cone and wedge with exothermic/endothermic chemical reactions: A numerical study	12
Enhanced heat transmission in methanol-based AA7072/AA7075 tangent hyperbolic hybrid nanofluid flow along a nonlinear expandable surface	12
Investigation of forced convection of a novel hybrid nanofluid containing NEPCM in a square microchannel: Application of single-phase and Eulerian-Eulerian two-phase models	11
Exploring the influence of crystallization fouling on microscale heat exchangers through machine learning analysis	11
Optimizing spray cooling systems: A comprehensive study on influential parameters and their effects on heat transfer under varied heat flux conditions	11
Numerical investigation of flashing of propane (R-290) in a helical capillary tube	11
Numerical simulation of heat transfer and nanoparticle transport in a nanofluid within a tumour surrounding a blood vessel	11
Numerical investigation of the circuit compartment of the central water eye active cooling device	11
MHD-driven thermal dynamics of bionanofluid flow on stretching porous media and the critical impact of multiple slip effects	11
Study of magnetohydrodynamics-based-mixed convection & entropy generation within the rectangular enclosure with two obstacles for Cu-SiO ₂ multiwalled carbon nan	11
Unsteady magnetohydrodynamic bioconvection Casson fluid flow in presence of gyrotactic microorganisms over a vertically stretched sheet	11
Microscopic mechanism of effects of nanostructure morphology on bubble nucleation: A molecular dynamics simulation	11
Flow friction and thermal performance of dimple imprinted based solar air-heater: A numerical study	11
Natural convection heat transfer in an eccentric annulus filled with hybrid nanofluid under the influence of thermal radiation and heat generation/absorption	11
Numerical study on heat and mass transport phenomena during a multilayer cladding process for direct laser deposition	11
Comparative analysis of tube designs in heat exchangers: A numerical simulation study for enhanced thermal-flow efficiency, "optimizing wavy tubes bundle geometries for enhanced heat transfer in under	11
Thermal performance of solar photovoltaic panel in hot climatic regions: Applicability and optimization analysis of PCM materials	11
Study of heat transfer in trihybrid nanofluid (Cu/Ag/Al ₂ O ₃ with H ₂ O) in Hele-Shaw cell and	11
Sensitivity analysis of MHD nanofluid flow in a composite permeable square enclosure with the corrugated wall using Response surface methodology-central composite design	11
Thermal management of PV cell in HCPV/T system: Cooling by mini-channel with pin-fin and jet impingement	11
Response surface methodology in optimizing heat transfer rate for homogeneous–heterogeneous reactions with thermal radiation effect on the micropolar nanofluid	11
Heat dissipation analysis and multi-objective optimization of Raspberry Pi CPU by natural convection	11
Turbulent Lorentz heat flow visualization in radiative boundary layer regime	11
Effects of physical property dynamic change on heat transfer characteristics of coal seam during in-situ pyrolysis of tar-rich coal	11
Influence of W-cut twisted tape inserts on heat transfer characteristics of a counter flow heat exchanger using CeO ₂ nanofluid – an experimental and numerical inves	11
Numerical investigations on the impact of metallic foam configurations on heat transfer in double tube heat exchanger: A parametric approach	10

Laminar natural convection in a 2-D pentagonal house with sloping roof heated by constant heat flux	10
Study on heat exchanger structural optimization of stationary engine thermoelectric generator system	10
Computational investigation on the energy efficiency of heat exchangers using Al ₂ O ₃ nanofluids	10
Effect of phase change material in cross flow and jet impingement cooling techniques used in heat sink for electronics application	10
Characteristics of MWCNT, SWCNT, Cu and water based on magnetized flow of nanofluid with Soret and Dufour effects induced by moving wedge: Consequence of Falkner–Skan power law	10
Unsteady Al ₂ O ₃ -Cu/H ₂ O hybrid nanofluid flow over a rotatable stretching disk with heat ge	10
Flow past triangular airfoil of variable thickness with low Reynolds number in Mars atmosphere	10
Computational study of magnetohydrodynamic mixed convective flow in a nanofluid-filled cavity with diagonally moving lid	10
Enhancement of concentrator photovoltaic system through convergent-divergent microchannels	10
Effect of porous fin parameters on the turbulent natural convection heat transfer in the side-heated cavity containing the internal heat source	10
Cattaneo–Christov double diffusive non-Newtonian nanofluid flow over a rotating disk of variable thickness influenced by swimming microorganisms and velocity slip condition	10
Numerical modeling and experimental validation of air-side forced convection on a Wire-on-tube condenser for a domestic refrigerator	10
Numerical investigation of free convection around a pair of vertically-aligned isothermally-heated vertical hollow cylinders	10
Application of CNTs/H ₂ O nanofluid and the wavy fin with dimples in thermal management of CPU: A numerical modeling of hybrid passive cooling	10
More accurate solution of mixed convection radiative power law fluid flow over a stretching porous surface with presence of Forchheimer and chemical reaction	10
Local thermal nonequilibrium perspective of heat transfer and fluid flow in a slender anisotropic porous cavity due to lateral uniform heat flux	10
Numerical study on heat and mass transfer characteristics of surface wettability	10
Darcy-Forchheimer nanofluid flow and heat transfer with convective boundary conditions: Insights from differential transform method	10
Flow-thermal field simulation and structural optimization of recent molten salt electrolysis setups	10
Significance of thermal and solutal analysis for the stagnation point flow of doubly stratified MHD tangent hyperbolic fluid along with Soret and Dufour effects: A numerical technique by T. Salahuddin	10
Numerical investigation of unsteady Casson–Williamson nanofluids in a non-isothermal radiated vertical cone with Joule and chemical effects	10
Dynamics of methanol conveying mono and hybrid nanoparticles to optimization of heat transfer across stretching cylinder	10
Transient temperature distribution in a rotating cylinder subject to a surface heat source and convective cooling	10
Theoretical investigation on microstructured hybrid surface heat transfer characteristics with Marangoni convection effect	9
Exploring enhanced heat transfer in wavy porous enclosures: Optimization and analysis of ternary nanofluid integration under varied boundary conditions with MHD mixed convection	9
Numerical simulation on critical heat flux of downward-facing surface with modified wall boiling model	9
Multi-objective optimization design of high-pressure plate-fin ammonia boiler based on MO-SHERPA algorithm	9
Heat transfer enhancement of power-law fluid in a solar-driven pretreatment system for microalgae hydrothermal liquefaction	9
Prediction of boundary heat flux in mold by inverse problem method	9
Irreversibility and heat transfer analysis in MHD Darcy-Forchheimer flow of Casson hybrid nanofluid flow through cone and wedge	9
Thermo-solutal impact of MHD hybrid nanofluid flow containing gyrotactic microorganisms over an inclined cylinder	9
Thermo-hydraulic analysis of MPCM/green graphene based nanofluids in a minichannel heat sink with comma-shaped pin fins	9
Influence of twisted tape length on the thermal performance of a heat exchanger tube	9
Effects of thermal radiation on natural convection in two connected circular cylinders suspended by NEPCM and porous media	9
Multiple hysteresis effects and their destabilization mechanism in the enclosed mixed convection enclosure with three representative aspect ratios	9
Effect of non-uniform heating on conjugate heat transfer and entropy generation characteristics within a partially filled porous corrugated channel	9
Enhanced heat transmission in unsteady magneto-nanoliquid flow due to a nonlinear extending sheet with convective boundary conditions	9
Multidiffusive nanofluid flow over a sphere with time-reliant nonlinear convective regime: Impact of activation energy	9
Computational study of micropolar Eyrling-Powell ferrofluid flow	9
The stability of the nanofluid flow in an inclined porous channel with variable viscosity	9
Comparison of unsteady MHD flow of second grade fluid by two fractional derivatives	9
A statistical model on heat transportation of hybrid magnetic nanoparticles with slip constraints on a heated shrinking sensor device using analysis of variance: Sensitivity analysis	9
Darcy-Forchheimer flow of Prandtl-Eyring nanofluid subjected to a Riga plate of varying thickness along with Brownian diffusion, thermophoresis and non-uniform heat source/sink effects	9
Numerical research of melt flow and temperature field during DC casting under the combined influence of electromagnetic field and intensive melt shearing	9
Conjugate natural convection along regularly ribbed vertical surfaces: A homogenization-based study	9
Magneto-double-diffusive natural convection and irreversibility analysis of a nanofluid flowing in an annular concentric space	9
Mixed convective flow of nanofluid across exponential surface: A numerical assessment of the impact of Darcy-Forchheimer and nanoparticle aggregation	9
A pulsatile movement of an annular Ree–Eyring nanofluid with gyrotactic motile microorganisms and time-varying conditions	9
Numerical investigation of combined effects of radiation and convection heat transfer from tube banks placed in a participating medium	9
Derivation of a continuous adjoint topology optimization method applied on heat transfer for incompressible flow	9
A numerical simulation of natural convection in a porous enclosure with nanofluid	9
A comparative assessment of mono and hybrid magneto nanofluid flow over a stretching cylinder in a permeable medium with generalized Fourier’s law	9
Numerical study on the effects of supercritical CO₂-based nanofluid on heat transfer deterioration	8
Selection and thermophysical assessment of phase change materials (PCMs) for space cooling applications in buildings	8
Numerical thermal control design for applicability to a large-scale high-capacity lithium-ion energy storage system subjected to forced cooling	8
Numerical research on the heat transfer and pressure drop of supercritical CO ₂ in spiral wound tubes	8
Assessment of diesel engine thermo-characteristics working with hybrid fuel blends	8
Numerical investigation of natural convection flow inside a square enclosure filled with different nanofluids by using two-phase Eulerian–Eulerian model: A new correlation for Nusselt number	8
Nanoparticle shape factor impact on double diffusive convective flow of nanofluid flow in special porous enclosures: A numerical study	8
Coupled thermo-hydro-mechanical analysis of a deep geological repository for final disposal of spent nuclear fuel in Brazil	8
Thermo-hydraulic transport characteristics of non-Newtonian nanofluid flow through wavy channel: Influence of nanoparticle volume fraction and Prandtl number	8
Natural-convection heat transfer from regularly ribbed vertical surfaces: Homogenization-based simulations towards a correlation for the Nusselt number	8
Analysis of seasonal variations and their impact on the microclimate of soilless glass greenhouses: Numerical and experimental investigations	8
3D flow of variable properties viscoelastic nanofluids with impacts of Arrhenius energy and Cattaneo–Christov double-diffusion	8
Effect of pore density and filling ratio of metal foam on melting performance in a heat storage tank	8
Analysis of heat transfer and prediction of preheating time of snow-melting on a highway T-beam bridge deck	8
Effect of waviness on thermal-flow characteristics in an inclined trapezoidal cavity filled with nano-encapsulated phase change material and water	8
Numerical study on the melting performance of PCM by fractal fins in three-tube heat storage system	8
Effect of oscillating flow on two rows of cooling holes with various configurations on film cooling performance	8
Convective heat and mass transfer analysis on Casson nanofluid flow over an inclined permeable expanding surface with modified heat flux and activation energy	8
Evaluation of nanoparticle shape factor on a laminar forced convective heat transfer characteristics of various nanofluids flow in a tube using single-phase numerical model	8
Study on full-coverage film cooling on center cone at engine-realistic conditions	8
Numerical exploration of the peristaltic flow of MHD Jeffrey nanofluid through a non-uniform porous channel with Arrhenius activation energy	8
Keller box numerical analysis of power-law rotating disk for nanofluid flow with chemical reaction	8
Geometrical effects of pins in a center cleared heat sink on thermal management of electronic systems	8
Thermodynamic analysis of variable magnetic field intensities and locations effect under developing thermally and hydraulically flow conditions in a tube	8
Triple-diffusive magneto-nanofluid flow over a nonlinearly stretching sheet	8
Study on temperature rise characteristics of DC charging cable for electric vehicles	8
Hydrodynamic and heat transfer characteristics of two circular cylinders in series under two-degrees-of-freedom vortex-induced vibration	8
Numerical study of heat transfer enhancement over a rotating surface. Part I: Effect of pin-fin shapes	8
Stagnation point flow of magnetized Cu–Cuo–water nano liquid via a porous dissipative stretching surface: A theoretical investigation	8
Numerical heat transfer of non-similar ternary hybrid nanofluid flow over linearly stretching surface	8
Flow and heat transfer characteristics in randomly packed beds with small D/d ratios	8
Improving sensible heat storage in a vertical annular pipe subject to variable inlet boundary condition using TiO ₂ /water nanofluid: Numerical study	8
Impact of magnetic field and ferrofluid on the intensification of heat exchange in a minichannel of particular shape	8
Analysis of entropy generation in Carreau ternary hybrid nanofluid flow over a stretching sheet	8
Design and optimization of an integrated lithium-ion battery thermal management system with a double-layer counterflow structure	8
Thermodynamic analysis of EMHD ternary nanofluid flow with shape factor effects over a shrinking sheet: A non-Fourier heat flux model	8
Role of Lorentz force and nanoparticles morphology on the dynamics of ternary hybrid nanofluid flow subject to porous disks and gyrotactic microorganisms	8
Study on the effect law of jet angle on the cooling of hot-rolled L-beam	8
Impact of nanoparticles loading to a novel hybrid TiO ₂ -CNTs/water nanofluid on thermal performance enhancement	8
Influences of interconnection structure on the flow and heat transfer behaviors of the hydrocarbon fuel in parallel SCRamjet regenerative cooling channels	8
Film flow boiling of a magnetic fluid over a vertical plate exposed to a magnetic field under reduced gravity conditions	8
Enhancing thermal management in channels with sinusoidal elastic obstacles and pulsating nano-jet impingement: A new model	7
Heat transfer analysis of nine cylinders arranged inline and staggered at subcritical Reynolds number	7