Numerical Heat Transfer Part A-Applications

(The median citation count of Numerical Heat Transfer Part A-Applications is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-07-01 to 2024-07-01.)
Flow and thermal transport characteristics of Triply-Periodic Minimal Surface (TPMS)-based gyroid and Schwarz-P cellular materials77
Dissipated-radiative compressible flow of nanofluids over unsmoothed inclined surfaces with variable properties40
Bioconvective flow of a variable properties hybrid nanofluid over a spinning disk with Arrhenius activation energy, Soret and Dufour impacts33
Optimization and analysis of maximum temperature in a battery pack affected by low to high Prandtl number coolants using response surface methodology and particle swarm optimization algorithm32
Conjugate heat transfer due to conduction, natural convection, and radiation from a vertical hollow cylinder with finite thickness32
Numerical treatment of thermal and concentration convection along with induced magnetic field on peristaltic pumping of a magnetic six-constant Jeffrey nanofluid through a vertical divergent channel31
Enhancement of the turbulent convective heat transfer in channels through the baffling technique and oil/multiwalled carbon nanotube nanofluids29
Cattaneo-Christov double diffusion based heat transport analysis for nanofluid flows induced by a moving plate27
Simulating and interpretation of MHD peristaltic transport of dissipated Eyring–Powell nanofluid flow through vertical divergent/nondivergent channel24
Numerical investigation for thermal growth in water and engine oil-based ternary nanofluid using three different shaped nanoparticles over a linear and nonlinear stretching sheet24
Three-dimensional analysis of entropy generation for forced convection over an inclined step with presence of solid nanoparticles and magnetic force23
Enhanced heat transmission in methanol-based AA7072/AA7075 tangent hyperbolic hybrid nanofluid flow along a nonlinear expandable surface21
Conjugate natural convection in a corrugated solid partitioned differentially heated square cavity20
Numerical analysis on heat transfer of parabolic solar collector operating with nanofluid using Eulerian two-phase approach20
Numerical heat transfer of non-similar ternary hybrid nanofluid flow over linearly stretching surface19
A numerical study of nanofluid flow over a curved surface with Cattaneo–Christov heat flux influenced by induced magnetic field18
Thermal and flow characterization in nanochannels with tunable surface wettability: A comprehensive molecular dynamics study18
Study of radiative magneto-non-Newtonian fluid flow over a nonlinearly elongating sheet with Soret and Dufour effects18
Significance of geothermal viscosity and heat generation/absorption on magnetic nanofluid flow and heat transfer17
A new look in heat balance integral method to a two-dimensional Stefan problem with convection16
Estimation of entropy generation and heat transfer of magnetohydrodynamic quadratic radiative Darcy–Forchheimer cross hybrid nanofluid (GO + Ag/kerosene oil) over a stretching sheet16
Particle swarm optimization based numerical study for pressure, flow, and heat transfer over a rotating disk with temperature dependent nanofluid properties15
Effect of circular perforated pin fin on heat transfer and fluid flow characteristics of rectangular microchannel heat sink15
Optimizing energy generation in power-law nanofluid flow through curved arteries with gold nanoparticles15
Irreversibility and heat transfer analysis in MHD Darcy-Forchheimer flow of Casson hybrid nanofluid flow through cone and wedge15
Thermal transport of MHD Casson–Maxwell nanofluid between two porous disks with Cattaneo–Christov theory15
A numerical study of boundary layer flow of Williamson nanofluid in the presence of viscous dissipation, bioconvection, and activation energy15
Thermal and hydraulic performance of rectangular microchannel heat sinks with trapezoidal porous configuration14
Investigations of nanofluid flow and heat transfer in a rotating microchannel using single- and two-phase approaches14
Convective heat loss prediction from conical cavity receiver of solar parabolic dish collector using numerical method and artificial neural network14
Computational analysis of ternary nanofluid flow in a microchannel with nonuniform heat source/sink and waste discharge concentration14
A novel local thermal non-equilibrium model for biological tissue applied to multiple-antennas configurations for thermal ablation14
Mesoscale simulations of saturated flow boiling heat transfer in a horizontal microchannel14
Thermal enhancement, thermophoretic diffusion, and Brownian motion impacts on MHD micropolar nanofluid over an inclined surface: Numerical simulation13
MHD free convection in a partially open wavy porous cavity filled with nanofluid13
Time-dependent squeezing flow of variable properties ternary nanofluids between rotating parallel plates with variable magnetic and electric fields13
Numerical study for temperature-dependent viscosity based unsteady flow of GP-MoS 2 /C 2 H 6 O 13
Simulation and analysis of heat dissipation performance of power battery based on phase change material enhanced heat transfer variable fin structure13
Numerical investigation on free convection from an isothermally heated hollow inclined cylinder suspended in air12
Mixed convective flow past counter-rotating side-by-side cylinders at low Reynolds number11
Thermal performance of radiative magnetohydrodynamic Oldroyd-B hybrid nanofluid with Cattaneo–Christov heat flux model: Solar-powered ship application11
Multi-objective optimization of the cooling performance of a mini-channel with boot-shaped ribs in transcritical regions using RSM and MOGA11
Entropy optimization of MHD non-Newtonian fluid in a wavy enclosure with double diffusive natural convection11
Performance enhancement studies on evaporative cooling using volumetric heat and mass transfer coefficients11
A comparative analysis of MoS2-SiO2/H2O hybrid nanofluid and MoS2-SiO2-GO/H2O ternary hybrid nanofluid over an inclined cylinder with 11
Three-dimensional numerical investigation of hybrid nanofluids in chain microchannel under electrohydrodynamic actuator11
Assessment of RANS and LES turbulence models for natural convection in a differentially heated square cavity11
Prediction of heat and mass transfer in radiative hybrid nanofluid with chemical reaction using the least square method: A stability analysis of dual solution11
An efficient two-dimensional heat transfer model for building envelopes10
Simulation of entropy and heat and mass transfer in Water-EG based hybrid nanoliquid flow with MHD and nonlinear radiation10
Enhanced heat transmission in unsteady magneto-nanoliquid flow due to a nonlinear extending sheet with convective boundary conditions10
A novel stochastic approach to study water droplet/flame interaction of water mist systems10
Thermal analysis of fused deposition modeling process based finite element method: Simulation and parametric study10
Numerical investigation of thermo-hydraulic transport characteristics of two-dimensional, steady flow through partially porous wavy channel10
Heat transfer enhancement in radiative peristaltic propulsion of nanofluid in the presence of induced magnetic field10
Numerical heat and solutal transfer simulation of fluid flowing via absorptive shrinkable sheet with Ohmic heat resistance10
Supercritical CO2 flowing upward in a vertical tube subject to axially nonuniform heating10
On the entropy analysis and hydrothermal behavior of buoyancy-driven magnetized hybrid nanofluid flow within a semi-circular chamber fitted with a triangular heater: Application to thermal energy stor10
Effects of thermal radiation on natural convection in two connected circular cylinders suspended by NEPCM and porous media10
Three-dimensional rotating flow of Cu–Al2O3/kerosene oil hybrid nanofluid in presence of activation energy and thermal radiation10
Conjugate heat transfer analysis for forced convective flow through a parallel plate microchannel: Effect of nonuniform asymmetric heating9
Analysis of condensation and evaporation heat transfer inside 3-D enhanced tubes9
A novel fixed-grid interface-tracking algorithm for rapid solidification of supercooled liquid metal9
An unsteady instigated induced magnetic field’s influence on the axisymmetric stagnation point flow of various shaped copper and silver nanomaterials submerged in ethylene glycol over an unsteady radi9
Simulation investigation of the oscillatory motion of two elliptic obstacles located within a quarter-circle cavity filled with Cu-Al 2 O 3 9
Experimental and numerical analyses of the combustion characteristics of Mg/PTFE/Viton fuel-rich pyrolants in the atmospheric environment9
Elastic deformation effect on carboxymethyl cellulose water-based (TiO 2 –Ti 6 Al 4 V) hybrid n9
Impacts of entropy generation for nonlinear radiative peristaltic transport of Powell-Eyring nanofluid: A numerical study9
Evaluation of breakup models for liquid side jets in supersonic cross flows9
Numerical investigation of steady state laminar natural convection of power-law fluids in side-cooled trapezoidal enclosures heated from the bottom9
A simplified thermal approximation method to include the effects of Marangoni convection in the melt pools of processes that involve moving point heat sources9
Numerical investigation of heat transfer in helical tubes modified with aluminum oxide nanofluid and modeling of data obtained by artificial neural network8
Application of Corcione correlation in a nanofluid flow on a bidirectional stretching surface with Cattaneo–Christov heat flux and heat generation/absorption8
Performance improvement of rectangular microchannel heat sinks using nanofluids and wavy channels8
Effects of coolant and wall temperature variations on impingement jet array thermal performance8
Natural convective nanofluid flow characteristics with Brownian motion effect in an annular space between confocal elliptic cylinders8
LBM modeling and analysis on microchannel slip flow and heat transfer under different heating conditions8
Applications of Soret and Dufour effects for Maxwell nanomaterial by convectively heated surface8
Study on trench film cooling on turbine vane by large-eddy simulation8
Modeling the mushy zone during the melting process under Neumann boundary condition using the improved enthalpy-porosity method8
Numerical analysis of interfacial nanolayer thickness on Darcy-Forchheimer Casson hybrid nanofluid flow over a moving needle with Cattaneo-Christov dual flux8
Experimental comparison and CFD analysis of conventional shell and tube heat exchanger with new design geometry at different baffle intervals8
Investigation and optimization on cooling performance of serial-parallel mini-channel structure for liquid-cooled soft pack batteries8
Single and multiple walled CNTs-TiO 2 ternary hybrid nanofluid flow of Williamson fluid in an unsteady combined convective regime: An entropy analysis8
Homotopy perturbation method on wave propagation in a transversely isotropic thermoelastic two-dimensional plate with gravity field8
Thermal examination of chemical interaction and thermophoretic diffusion of Williamson fluid flow across Riga Plate surface with nonlinearity radiation flux8
Analytical methods for the efficiency of annular fins with rectangular and hyperbolic profiles under partially wet surface conditions8
Convective heat and mass transfer analysis on Casson nanofluid flow over an inclined permeable expanding surface with modified heat flux and activation energy8
Energy storage analysis of phase change materials (PCMs) integrated with thermal conductivity enhancers (TCEs)8
Application of multi-parametric characterization to water-based fire suppression systems in compartment fire scenarios7
Significance of irregular heat source and Arrhenius energy on electro-magnetohydrodynamic hybrid nanofluid flow over a rotating stretchable disk with nonlinear radiation7
Endwall film cooling holes design upstream of the leading edge of a turbine vane7
Numerical investigation of the flow and thermal behavior of impinging single and multi-orifice synthetic jets with different waveforms7
Thermo-solutal migrating heat producing and radiative Casson nanofluid flow via bidirectional stretching surface in the presence of bilateral reactions7
RSM-based sensitivity analysis of hybrid nanofluid in an enclosure filled with non-Darcy porous medium by using LBM method7
Impact of porosity on two-dimensional unsteady MHD boundary layer heat and mass transfer stagnation point flow with radiation and viscous dissipation7
Multi-optimization of a specific laminated cooling structure for overall cooling effectiveness and pressure drop7
A numerical study of slug bubble growth during flow boiling in a diverging microchannel7
Impacts of uniform and sinusoidal heating in a nanofluid saturated porous chamber influenced by the thermal radiation and the magnetic field7
Numerical study of a solar thermoelectric generator with vortex tube for hybrid vehicle7
Analysis of the two-phase flow, heat transfer, and instability characteristics in a loop thermosyphon7
Three-dimensional flow of hybrid nanofluid through Darcy-Forchheimer porous surface: A Legendre wavelet collocation approach7
Mixed convection MHD boundary layer flow, heat, and mass transfer past an exponential stretching sheet in porous medium with temperature-dependent fluid properties7
Lattice Boltzmann method for nanofluid forced convection heat exchange in a porous channel with multiple heated sources7
A comparative study on pulsating flow of Au + SWCNT/blood and Au + MWCNT/blood based Jeffrey hybrid nanofluid in a vertical porous channel with entropy generation7
Numerical investigation of the forward and backward thermocapillary motion of a water droplet in a microchannel by two periodically activated heat sources7
Effect of three types of magnetic field modulation on the instability of heat transfer in micropolar nanofluid filled within Hele-Shaw cell7
Numerical evaluation of heat irreversiblity in porous medium combustion of third-grade fluid subjected to Newtonian cooling7
Conjugate heat transfer in lattice frame materials based on novel unit cell topologies7
Electromagnetohydrodynamic (EMHD) convective transport of a reactive dissipative carreau fluid with thermal ignition in a non-Darcian vertical duct7
Enhancement of charging and discharging of phase change material in annular thermal energy storage unit by applying magnetic field7
Model-based comparison of hybrid nanofluid Darcy-Forchheimer flow subject to quadratic convection and frictional heating with multiple slip conditions7
3-D numerical investigation on buoyancy-induced flow and heat transfer from a hollow horizontal steel cylinder with finite wall thickness7
Experimental and numerical study of heat transfer and friction factor characteristics of an inclined elliptical dimple channel having inline and staggered pattern7
Investigation of wetting states and wetting transition of droplets on the microstructured surface using the lattice Boltzmann model7
A fourth-order compact difference algorithm for numerical solution of natural convection in an inclined square enclosure7
Wall jet nanofluid flow with thermal energy and radiation in the presence of power-law7
Numerical simulation of the effect of height and number of heaters on heat transfer during natural convection in a cubic enclosure filled with nanofluid7
Numerical and thermo-energy analysis of cycling in automotive air-conditioning operating with hybrid nanolubricants and R1234yf7
Numerical study of natural convective heat transfer of nanofluids within a porous corrugated triangular cavity in the presence of a magnetic field7
Numerical investigation of adiabatic film cooling effectiveness through compound angle variations7
Experimental and numerical study of inverse natural convection-conduction heat transfer in a cavity with a fin7
Flow friction and thermal performance of dimple imprinted based solar air-heater: A numerical study7
Effect of MHD mixed convection on a heat-generating element cooling inside a ventilated square cavity filled with Fe3O4–water ferrofluid7
Insight into influence of thermal radiation and Cattaneo–Christov model on ternary hybrid nanofluid (TiO2–Al2O3–MoS2/kerosene oil) and hybrid nanofluid (TiO7
Numerical simulation of flow boiling heat transfer and pressure drop in a corrugated plate heat exchanger at low mass flux and vapor quality conditions7
Heat transfer in 3-D air gap between garment and body surface7
Entropy generation study due to MHD double-diffusive convection in the rectangular cavity with built-in rectangular blockage6
Optimization and correlations development for heat transfer and fluid flow characteristics of ZnO/H 2 O-ethylene glycol-based nanofluid flow through an inclined ribb6
Activation energy and convective heat transfer effects on the radiative Williamson nanofluid flow over a radially stretching surface containing Joule heating and viscous dissipation6
Impact of rotation on thermal instability of Darcy–Brinkman porous layer filled with a Jeffrey nanofluid6
Numerical investigation of heat transfer in a tube equipped with twisted tape with different angles and under constant heat flux with copper nanofluid and evaluation of the results obtained using perc6
Analysis of Bejan number and Entropy generation of Non-Newtonian nanofluid through an asymmetric microchannel6
Heat transfer analysis of MHD Casson nanofluid flow over a nonlinear stretching sheet in the presence of nonuniform heat source6
Analysis of nonlinear thermal radiation and entropy on combined convective ternary (SWCNT-MWCNT-Fe 3 O 4 ) Eyring–Powell nanoliqui6
Significance of geothermal viscosity for the magnetic fluid flow between co-rotating porous surfaces6
FEM simulation of the entropy due to a buoyancy-induced flow confined novel prismatic enclosures using nano-encapsulated phase change materials6
Coupled two-fluid flow and wall heat conduction modeling of nucleate pool boiling6
Reconstruction of surface laser power and internal temperature of biological tissue during laser-induced thermal therapy6
A high temperature turbine blade heat transfer multilevel design platform6
Buoyancy-induced convective flow and heat transfer over obstacles embedded inside a Cu–water nanofluid-saturated porous cavity6
A numerical parametric study to enhance thermal hydraulic performance of a novel alternating offset oblique microchannel6
Real-time physical field reconstruction for nanofluids convection using deep learning with auxiliary tasks6
Performance assessment of annular fins and cellulose cooling pad on heat transfer enhancement of evaporative heat exchangers using volumetric heat and mass transfer coefficients6
Activation of energy in MHD Casson nanofluid flow through a porous medium in the presence of convective boundary conditions and suction/injection6
Darcy–Forchheimer dynamics of hybrid nanofluid due to a porous Riga surface capitalizing Cattaneo–Christov theory6
Bioconvective unsteady fluid flow across concentric stretching cylinders with thermal-diffusion and diffusion-thermo effects6
Significance of radiation and chemical reaction on MHD heat transfer nanofluid flow over a nonlinearly porous stretching sheet with nonuniform heat source6
Electro-enhanced natural convection analysis for an Al2O3-water-filled enclosure by considering the effect of thermal radiation6
Surface temperature analysis and thermophysical property estimation for breast cancer by deep learning6
Numerical investigation of thermo-hydraulic transport characteristics of laminar flow through partially filled porous wavy channel: Effect of Prandtl number6
2-D numerical study of ferrofluid droplet formation from microfluidic T-junction using VOSET method6
Numerical investigation on direct contact condensation-induced water hammer in passive natural circulation system for offshore applications6
Thermal performance of U-shaped and L-shaped heat pipes6
Non-similar analysis of MHD bioconvective nanofluid flow on a stretching surface with temperature-dependent viscosity6
Influence of twisted tape length on the thermal performance of a heat exchanger tube6
Thermal and mass transfer analysis of Casson-Maxwell hybrid nanofluids through an unsteady horizontal cylinder with variable thermal conductivity and Arrhenius activation energy6
Bioconvective MHD flow of Williamson nanofluid past an expandable Riga wedge in the presence of activation energy, mass suction and velocity slip6
Heat transfer performance and exergy analyses of MgO and ZnO nanofluids using water/ethylene glycol mixture as base fluid6
Heat transfer characteristics of nanofluid under the action of magnetic field based on molecular dynamics and flow states6
A coupled CFD approach for performance prediction of fin-and-tube condenser6
Study of magnetohydrodynamics-based-mixed convection & entropy generation within the rectangular enclosure with two obstacles for Cu-SiO 2 multiwalled carbon nan6
Radiative and dissipative MHD Eyring–Powell nanofluid bioconvective flow through peristaltic waves in the presence of bilateral chemical reaction with Arrhenius activation energy: Entropy optimization6
Geometrical optimization of boron arsenide inserts embedded in a heat spreader to improve its cooling performance for three dimensional integrated circuits6
Bioconvective Carreau nanofluid flow with magnetic dipole, viscous, and ohmic dissipation effects subject to Arrhenius activation energy6
Analysis of turbulent transport characteristic in hydrogen diffusion flames using direct numerical simulation6
A numerical study of supercritical carbon dioxide as a medium for thermal energy storage applications under natural convection6
Heat transfer optimisation through viscous ternary nanofluid flow over a stretching/shrinking thin needle5
Two-dimensional pore-scale investigation of liquid water evolution in the cathode of proton exchange membrane fuel cells5
Analysis of heat transfer and thin film flow of Au−Np over an unsteady radial stretching sheet5
A natural convection conjugate heat transfer of Nano-Encapsulated Phase Change Materials (NEPCMs) in an inclined blocked square enclosure5
Monte Carlo parameter estimation and direct simulation of in vitro hyperthermia-chemotherapy experiment5
A numerical investigation of convective condensation in micro-fin tubes of different geometries5
Effect of vibration on heat transfer to laminar non-Newtonian nanofluid flowing through a circular pipe: A numerical analysis5
Numerical study on the effect of fin length variation on the thermal performance of a bus duct conductor5
Analysis of entropy generation in Carreau ternary hybrid nanofluid flow over a stretching sheet5
Impact of wavy porous layer on mixed convection flow of a hybrid nanofluid in an enclosure under the effect of partial magnetic field5
Magneto-double-diffusive natural convection and irreversibility analysis of a nanofluid flowing in an annular concentric space5
Numerical study to recover low-grade waste heat using pulsating heat pipes and a comparative study on performance of conventional pulsating heat pipe and additional branch pulsating heat pipe5
Influence of tilt angles and different models of fluid viscosity on coupled natural convection in a differentially heated closed square cavity with a partition5
Natural convection due to lateral uniform heat flux in a slender porous cavity saturated with nanofluid: Departure from LTE state5
Mixed convective-quadratic radiative MoS 2SiO 2 / H 25
Influence of triangular spoilers on the performance of serpentine solar air heaters5
Influence of oblique angle variations on the thermo-hydraulic characteristics of the oblique fin heat sink with Al2O3 water nanofluid5
Numerical study and parameters estimation of anomalous diffusion process in porous media based on variable-order time fractional dual-phase-lag model5
Heat transfer enhancement in a nanofluid saturated porous medium with cross diffusion and nonequilibrium: A regression approach5
Unsteady MHD chemically reactive dissipative flow of nanofluid due to rotating cone5
Double-diffusive convective flow of hybrid nanofluid in an inverted T-shaped porous enclosure: A numerical study5
Keller Box procedure for stagnation point flow of EMHD Casson nanofluid over an absorbent stretched electromagnetic plate with chemical reaction5
Effect of filling ratio, number of loops, and transverse distance on the performance of pulsating heat pipe in a microchannel heat sink5
Simulation design for thermal model from various materials in electronic devices: A review5
Transient thermal performance of multilayer thermal protection systems doped with phase change materials5
Entropy analysis of unsteady MHD nanofluid flow over a stretching surface with effects of variable viscosity and nonuniform heat generation5
The flow analysis of Williamson nanofluid considering the Thompson and Troian slip conditions at the boundary5
Thermal features of Darcy-Forchheimer on a micropolar fluid flow over a curved stretching surface with homogenous-heterogeneous reactions5
Global sensitivity analysis and optimization for coal–water slurry preheaters based on metamodel of optimal prognosis5
Sisko fluid modeling and numerical convective heat transport analysis over-stretching device with radiation and heat dissipation5
Numerical research on the effect of leaf venation shape bionic surface extension and the location on latent heat storage system5
Turbulent convective heat transfer behavior of supercritical water flowing upward in 2 × 2 rod bundle channels with various spacers5
Numerical simulation on heat transfer inside and outside of vertical buried pipes based on two-model order reduction methods5
Nonsimilar solution of hybrid nanofluid over curved stretching surface with viscous dissipation: A numerical study5
On the analysis of thermosolutal mixed convection with thermophoresis effects in a wavy porous cabinet5
Numerical investigation of transient responses of triangular fins having linear and power law property variation under step changes in base temperature and base heat flux using lattice Boltzmann metho5
Advancing heat transfer modeling through machine learning: A focus on forced convection with nanoparticles5
Darcy-Forchheimer flow of Prandtl-Eyring nanofluid subjected to a Riga plate of varying thickness along with Brownian diffusion, thermophoresis and non-uniform heat source/sink effects5
Experimental and numerical study of inverse natural convection-conduction problem in a fully partitioned cavity4
Analyses of entropy generation and Hall influence in the Cattaneo–Christov double diffusive radiative Non-Darcy flow of a Casson nanofluid within rotating disks4
Effect of aspect ratio and nonuniform temperature on mixed convection in a double lid-driven cavity4
Effects of flow regime and geometric parameters on the performance of a parabolic trough solar collector using nanofluid4
Boundary layer formations over a stretchable heated cylinder in a viscoelastic fluid with partial slip and viscous dissipation effects4
The optimum computational simulation of MHD natural convection for improved cooling efficiency and entropy performance inside Ϻ-shaped cabinet4
Bioconvective radiative unsteady Casson nanofluid flow across two concentric stretching cylinders with variable viscosity and variable thermal conductivity4
Numerical analysis on heat and mass transfer of the planar membrane dehumidifier4
Numerical analysis of afterburner chamber design for solid oxide fuel cell system4
Entropy generation analysis and cooling time estimation of a blast furnace in natural convection environment4
Numerical investigation of forced convection flow characteristics on hydrophobic surface with nanofluid4
Numerical analysis of combined free convection and radiation heat transfer from an open hemispherical cavity4
Insight into the dynamics of active and passive controls over the measurement of thermal conductivity of nanofluids subject to magnetic field and thermal radiation through the stretching surface4
Benchmarked simulations of natural convection airflow in a square cavity4
Numerical investigations on the effect of convex-dimple streamwise arrangements on the flow and heat transfer characteristics of rectangular convex-dimple-grooved channels4
Interactions between solid–fluid particles during thermosolutal convection of a rotating cylinder in a cavity4
Numerical study of MHD Prandtl Eyring fuzzy hybrid nanofluid flow over a wedge4
EMHD flow and convective heat transfer over a prescribed surface temperature (PST) and prescribed heat flux (PHF) heating condition4
Radiative ternary nanoliquid flow over an exponentially stretching sheet with motile oxytactic microorganisms4
Transient rotating three-dimensional flow of micropolar fluid induced by Riga plate: Finite element approach4
Heat source/sink effect in radiative flow of hybrid nanofluid subject to noninertial frame4
Numerical investigation on the influence of installation angle of inclined interrupted fins heat sink on heat dissipation performance4
Numerical study of thermal-hydraulic performance of sCO2-molten salt printed circuit heat exchanger with discontinuous fins channel4
Influence of variable characteristic of the porous medium on unsteady nanofluid flow with melting heat transference4
Framing the features of nanolayer and diameter of carbon nanotubes in the flow of blood over a stretching cylinder in presence of magnetic induction4
A passive modeling strategy of steady MHD reacting flows for convectively heated shear-thinning/shear-thickening nanofluids over a horizontal elongating flat surface via Wakif’s-Buongiorno approach4
Natural convection heat transfer in a three-dimensional enclosure under the effect of heated pin-fins of various shapes4
Mathematical investigation of two-stage dehumidification from single rotary dehumidifier with and without precooling4
Simplified PN finite element approximations for coupled natural convection and radiation heat transfer4
Numerical modeling of bioconvection and heat transfer analysis of Prandtl nanofluid in an inclined stretching sheet: A finite difference scheme4
Numerical study on the effects of supercritical CO2-based nanofluid on heat transfer deterioration4
Thermal performance investigation of supercritical methane in minichannel heat sink on flight vehicle actuator under geometry effect of cross section4
Electroosmosis-driven heat transfer in Jeffrey fluid flow through tapered porous channel4
Large-eddy-simulation of turbulent buoyant flow and conjugate heat transfer in a cubic cavity with fin ribbed radiators4
Mixed convection simulation of TMPHN by Eringen’s micropolar rules, Tiwari–Das nanofluid model, and mass-based hybridity algorithm4
A novel numerical study on the melting process of phase change materials in a heat exchanger for energy storage4
Construction of dynamic temperature field model of ball screw based on superposition of positive and negative temperature fields4
A comprehensive analysis of a rectangular microchannel heat sink furnished with a circular perforated cylindrical pinfin4
Potent turbulence model for the computation of temperature distribution and eddy viscosity ratio in a horizontal direct-chill casting4
Computational analysis of radiative nanofluid flow past an inclined cylinder with slip effects using the Yamada–Ota model4
Magnetized flow of naturally convective viscous fluid in permeable rhombus-shaped annulus by executing FEM simulations4
Magneto-convection in an anisotropic porous cavity due to nonuniform heat flux at bottom wall4
Effect of an internal thermal-conductive cylinder on the conjugate conduction-convection in an enclosure4
Impact of vibration on heat transfer and flow properties of heat exchange surfaces4
Numerical analysis of a helically corrugated tube using a novel combination of W/EG-based non-Newtonian hybrid nanofluid4