International Journal of Pavement Engineering

Article	Citations
Prediction of asphalt concrete flexibility index and rut depth utilising deep learning and Monte Carlo Dropout simulation	68
Development of pavement thermal area index (PTAI) for flexible pavement performance evaluation	63
Reliability analysis of flexible pavements based on the quantile-value method	40
Utilising cement kiln dust as a sustainable cementitious alternative for recycled asphalt pavement materials: a mechanical, economic, and environmental study	40
Enhancing concrete pavement performance using refuse derived fuel fly ash as a sustainable cementitious material	39
Study on the effect of acid rain erosion on the adhesion properties of asphalt-aggregate interface	35
Laboratory evaluation of the effect of cement concrete overlays on the existing asphalt concrete pavement with different degrees of bonding	35
ANN-based optimization of single-stage triaxial tests for predicting permanent deformation in pavement granular layers	32
Asphalt mortar design method and its rationality verification in cross-scale prediction	31
Evaluation of machine learning approach for base and subgrade layer temperature prediction at various depths in the presence of insulation layers	30
Utilisation of aged and unaged basic oxygen furnace steel slag aggregates in pavement quality concrete	30
Effect of maleic anhydride grafted and gamma-irradiated waste polypropylene on rheological properties of asphalt binder	29
Experimental study on the influence of subgrade moisture content on compaction quality control indexes	27
Study on tire-pavement contact characteristics and tire vibration noise based on finite element numerical simulation	26
A review of advanced pavement distress evaluation techniques using unmanned aerial vehicles	26
Cracking behaviour of concrete with superabsorbent polymer (SAP) under rolling fatigue load and temperature coupling	26
Aggregate size characterisation and porosity analysis of granular mixtures	25
Resistance of some outdoor pavements to destructive combined effects in cold regions	25
A reliable approach for classifying metakaolin content of high-Performance concrete via machine learning algorithm	25
Assessing the effect of short and long-term aging on moisture damage of hot mix asphalt using two different methods	25
Epoxy-ended hyperbranched polymer-grafted graphene oxide for cold-mixed epoxy asphalt modification	24
Strength and durability of high-performance preplaced aggregate concrete for rapid pavement repair	24
Prediction of blow-up for jointed concrete pavement	24
Laboratory test study on moisture migration and structural damage evolution of frozen unsaturated red clay	24
Impact resistance study of lime slag–stabilised steel slag mixes	23

Preparation methodology and performance of methyl methacrylate modified unsaturated polyester resin mortar for thin layer repair	23
Selection of suitable backcalculation technique and prediction of laboratory resilient modulus from NDT devices	22
Appraising annual post-maintenance functional performance of asphalt roadway based on causal inference approach	22
Study on anti-skid performance improvement of asphalt pavement: utilising D-limonene to synthesise environmentally friendly materials	22
Pufferfish algorithm-optimized boosting models for predicting the stress-strain behavior of fiber-reinforced polymer-confined recycled and natural aggregate concrete	22
A sensitivity analysis on the simulated measurements of traffic speed deflection devices	21
Rutting-resistance investigation of amorphous carbon powder modified binder and asphalt mixture containing siliceous aggregates	21
A study of the efficiency of photocatalytic asphalts in reducing NOx pollution: from laboratory to semi-real scale	21
Comparison of hydrated lime, paraffin wax and low-density polyethylene modified bituminous binders: a perspective of adhesion and moisture damage	21
Generalised Kelvin contact models for DEM modelling of asphalt mixtures	20
Design of flexible pavement thickness using stabilized high plastic soil by means of fly ash-based geopolymer	20
Aging sensitivity of recycled binder blends based on assessment of rheological, chemical, and nano-mechanical properties	20
Laboratory assessment of the impact of modified asphalt binder on mechanical properties of grouted macadam mixtures under various performance conditions	20
An automatic pothole detection algorithm using pavement 3D data	19
Performance of anti-icing stone mastic asphalt: laboratory and field investigation	19
Silty soil resilient modulus stabilised with cement and recycled aggregate	19
Influence of bitumen foam characteristics on moisture susceptibility of foamed bitumen stabilised mixes	19
Experimental studies on pavement quality geopolymer-based concrete (PQGPC) for high-volume roads: a sustainable infrastructure	19
Study into the effect of designing parameters of asphalt mixture on its resistance to ageing phenomenon	19
Strength and toughness attenuation mechanism of biobased cold-mixed epoxy asphalt under freeze–thaw cycles	18
Investigation on the interaction between autonomous vehicles and pavement rutting considering driving safety	17
Qualitative assessment of Traffic Speed Deflectometer data collection practice	17
Physio-chemical surface treatment of light-weight expanded clay aggregates on the bonding characteristics and micro-structural interactions of light-weight concrete	17
The behavior of permeable interlocking concrete pavement under different rainfall intensities and design conditions	17
Tire wastes and durability: the influence of crumb rubber and recycled steel fibre on properties of roller compacted concrete	17
Low-temperature self-healing of SBS-modified asphalt mixtures via acoustic emission and semicircular bending tests	17
Crack behaviour analysis in continuously reinforced concrete pavements: insights from transverse steel configurations	17
Estimation of permanent deformation behaviour of crushed waste rocks using multistage repeated load triaxial and CBR tests	17
Comparative analysis of non-standardised aging methods for asphalt binder against standard laboratory aging and natural field aging	17
Assessment and mechanism of antioxidant activity of phenols as asphalt antioxidants	16
Ravelling susceptibility of porous asphalt pavement in salt environments using multi-scale modelling analysis	16
Environmental performance evaluation of warm mix asphalt with recycled concrete aggregate for road pavements	16
Aggregate packing characterisation of cold recycled mixtures	16
Asphalt concrete crack propagation parameters from XFEM modelling of the Texas Overlay Test	16
Effect of ultraviolet radiation on dielectric properties of asphalt mixture	16
Influence of coarse aggregate morphology on the mechanical characteristics of skeleton in porous asphalt concrete	16
Autonomous trucks’ (ATs) lateral distribution and asphalt pavement performance	16
Establishing the limits of linear viscoelastic behaviour for bitumen	16
Analysis of LVE behaviour and fatigue damage evolution of asphalt pavements with different interface conditions in an accelerated full-scale experiment	16
Multi-level induced healing of steel bridge deck asphalt pavement: an energy-saving and emission-reducing microwave heating method	15
Study of cohesion and adhesion in asphalt-aggregate systems through uniaxial pull-off test	15
Microscopic characterisation and chemical analysis of modified asphalt-grout ITZ in SFP material using silane coupling agent	15
A novel approach to assess internal pore structure and quantify tortuosity of clogged pervious concrete through image analysis techniques	15
Mechanical properties assessment of corn husk fibre-reinforced cement-treated lakebed sediments for road construction	15
Fracture resistance and thermo-mechanical performance of asphalt mixes with crushed waste glass fine aggregates	15
Enhanced pavement crack segmentation with minimal labeled data: a triplet attention teacher-student framework	15
Micromechanics approach to calculate the adsorbed asphalt film thickness on mineral fillers and evaluate physiochemical interactions	15
A prediction model of the friction coefficient of asphalt pavement considering traffic volume and road surface characteristics	14
Physics-informed graph attention networks for scalable pavement response prediction	14
Novel hybrid machine learning models including support vector machine with meta-heuristic algorithms in predicting unconfined compressive strength of organic soils stabilised with cement and lime	14

Monte Carlo simulations of deformation behaviour of unbound granular materials based on a real aggregate library	14
The senses of asphalt: a new era in road safety with capacitance-based sensing	14
A simplified skid resistance predicting model for a freeway network to be used in a pavement management system	13
Mechanical, anti-icing and de-icing performance of porous asphalt mixture containing chloride-based particle	13
Clogging characteristics and recovery effects of porous asphalt concrete with different gradations	13
Study on the performance of tunnel warm-mix flame retardant asphalt based on macro and micro perspectives	13
Incorporating decision makers’ attitudes towards risk and opportunity into network-level pavement maintenance optimisation	13
A spatial-statistical model to analyse historical rutting data	13
Investigation into the modification mechanism and performance assessment of waste battery powder modified bitumen	13
Assessing permanent deformation potential of asphalt mixtures based on viscoelastic characteristics	13
Intelligent detection of airport pavement subtle crack based on one-stage anchor-free deep neural network	13
Investigation of graphite tailings as a substitute for filler in asphalt mastics	13
Workability and strength optimisation of concrete utilising artificial sand blended with natural sand for road pavement	13
Expansion of Si-SARA method utilising non-specialised instruments for multi-factorial asphaltene precipitation analysis	13
Evaluating engineered cementitious composite for fatigue resistance in pavement applications	13
Enhancement of mechanical and rheological properties of epoxy-recycled asphalt binders through SBS/CR composite modification	13
An economic approach to road condition assessment using road user feedback: A new model and its application	13
Temperature dependency analysis of the fracture characteristics of semi-flexible pavement (SFP) mixtures using acoustic emission technique	12
Deep learning-based predictive models for pavement patching and manholes evaluation	12
Evaluating the role of base binder type and aging severity on restoration capacity of rejuvenating agents for sustainable asphalt recycling	12
Comparative analysis of different surrogate performance tests for evaluating the rutting potential of Marshall-designed bituminous mixtures	12
Deep-learning based non-contact method for assessing pavement skid resistance using 3D laser imaging technology	12
Quantitative mapping of internal structural parameters to mechanical properties of asphalt concrete using principal component analysis	12
Effect of glass fibers and waste engine oil on the properties of RAP asphalt concretes	12
Strong interlocking skeleton gradation design and performance evaluation of cement-stabilised crushed gravel via vertical vibration test method	12
Collective influence of autonomous trucks and climate change on asphalt concrete pavement performance	12
A U-Net-like full convolutional pavement crack segmentation network based on multi-layer feature fusion	12
Study on mechanical properties and microscopic mechanism of fibre-modified subgrade soil under freeze–thaw cycles	12
Performance evaluation of asphalt binders modified with waste engine oil and various additives	12
Experimental measurements of the moisture diffusion and strength damage mechanism of dense asphalt mixtures	12
Accelerated evaluation of membranes for pavement structures on orthotropic steel bridge decks	12
Optimisation of pervious concrete performance by varying aggregate shape, size, aggregate-to-cement ratio, and compaction effort by using the Taguchi method	11
Optimisation of composite asphalt mixture involving glass fibre and nano clay based on central composite design	11
Experimental investigation on mechanical and fatigue characteristics of cement-treated coal mine overburden materials	11
Investigating the influence of concrete thermal characteristics and design parameters on hydronic pavement system performance	11
Study on fracture behaviour of basalt fibre reinforced asphalt concrete with plastic coupled cohesive model and enhanced virtual crack closure technique model	11
Chemical and rheological characterisation of in-situ SBS modified asphalt pavement considering the effect of aging gradient	11
Innovative use of nanomaterials for improving performance of asphalt binder and asphaltic concrete: a state-of-the-art review	11
Asphalt-related temperature correction of deflections measured in central FWD tests on a concrete-over-asphalt composite pavement	11
Gradation effect and improved Duncan-Chang model of dense skeleton structure soil rock mixture	11
Field implementation of cellulose nanocrystals (CNC) in concrete pavement test track	11
Numerical investigation on the behaviour of the high-strength ring strengthened dowel connection under vertical load	11
Real-time data sensing and digital twin model development for pavement material mixing: enhancing workability and optimisation	11
Asphalt mixture force chains morphological characteristics and bearing capacities investigation using discrete element method	11
Influence of initial state and residual stresses on the modulus-density relationship of geomaterials: insights from multiple experimental setups	11
Evaluating the low-temperature creep properties of polyphosphoric acid-polymer composite-modified asphalt	11
Field investigation of early-age behaviour of continuously reinforced concrete pavement with semi-rigid base	11
Experimental investigation of the mechanical properties of asphalt mixtures containing lightweight expanded clay aggregate replacing coarse aggregates and modified with nano-AL 2	11
ASR performance of concrete at external alkali supply – effects of aggregate mixtures and blended cement	11
Mesostructural evolution of fine-aggregate bitumen emulsion–cement composites by X-ray tomography	11
Comparison of mixed mode I/III fracture toughness data obtained from the ENDB specimens manufactured by gyratory cylinders with two diameters of 100 and 150 mm	11
Reconsidering the strength of concrete pavements	10
Laboratory simulation of frost on a pavement column inside a freezer under a controlled environment	10
Extension of the Boussinesq’s equation to reflect the actual changes in vertical stresses in geomaterials using LWD loading	10
Investigation on rheological characteristics of low-emissions crumb rubber modified asphalt	10
Graph neural network-based 3D asphalt concrete pavement response modelling	10
Novel approach to evaluate the effect of aggregate physical properties on the stiffness of pavement base layer	10
Laboratory performance of recycled polyethylene modified epoxy asphalt binders	10
Condition assessment of cycle path texture and evenness using a bicycle measurement trailer	10
Effect of road roughness on E-truck energy consumption	10
Stabilisation of demolition materials for pavement base layer applications using bagasse ash geopolymer	10
Effects of aging behavior on the adhesion and low-temperature performance of surfactant-crumb rubber modified asphalt binder	10
Identification of asphalt pavement transverse cracking using vehicle vibration based on multi-sensor fusion and convolutional neural network	10
Prediction of rut depth in asphalt pavement sections using permanent deformation shift model and stress sweep rutting test	10
Rutting characteristics evaluation and prediction model development for warm mix asphalt	10
Prediction of fatigue crack behaviour of carbon fibre reinforced asphalt using fracture testing and modelling of the adhesive zone CZM	10
Reduction of critical positive temperature gradients in jointed plain concrete pavements	10
Investigation on blending characteristics in asphalt mixtures with recycled asphalt and waste cooking oil as rejuvenator	10
Full-scale validation of a mechanistic model for asphalt grid reinforcement	10
Image texture analysis to evaluate the microtexture of coarse aggregates for pavement surface courses	10
A versatile deformation-oriented criterion for optimisation-based backcalculation of the pavement moduli and thickness	9
Image processing-based classification of pavement fatigue severity using extremely randomized trees, deep neural network, and convolutional neural network	9
Effect of aging and blending duration on the degree of blending and performance of recycled hot-mix asphalt (HMA)	9
Comparative assessment of recycled concrete and recycled asphalt aggregate in pervious concrete: emphasis on strength and life cycle assessment	9
Pavement maintenance and rehabilitation budget allocation considering multiple objectives and multiple stakeholders	9
Rutting behaviour of cold bitumen emulsion mix containing alternate fillers	9
Improving the fracture properties of asphalt pavements made with warm mix asphalt (WMA) using nano-molybdenum disulfide particles (NMDSP) under shear and tear deformations	9
Developing methods and strategies to reduce the impact of rumble strips (RS) on pavement performance	9
The effect of joint properties on interlocking block pavement performance	9
Tracking particle displacements in unbound aggregate layers of roadways	9

Investigation of rutting performance of asphalt mixture and pavements based on mesostructured finite element simulation	9
Determination of threshold of asphalt pavement structure crack damage rate to quantify the severity of structural crack damage	9
Effect of recycling cycles on hot and warm bituminous mixtures with high rates of reclaimed asphalt	9
Evaluation of the structural response of two in-service thin flexible pavements under heavy vehicle loading during different seasons by built-in sensors	9
Mechanisms associated with sulfidation gas release, desulphurisation and degradation of rubber powder in crumb rubber modified asphalt	9
Temperature and strain study of rubberised concrete pavement slabs under plateau environment	9
Effect of environmental factors on mechanical properties and damage characteristics of mine overburden used in subgrade	9
Skid resistance performance evaluation of semi-flexible pavement based on surface texture features	9
Life cycle assessment of lightweight cellular concrete subbase pavements in Canada	9
Poroelastic modeling of pore pressure development in granular pavement layers	9
Experimental and numerical investigation on shear behavior of soil-tunnel slag waste mixtures	9
Prediction of pavement friction using Markov chain at the project and network levels	9
Improvements to the bonding condition of ultra-thin concrete overlays for airport rigid pavements	9
Development of a temperature prediction model for asphalt pavements considering air temperature data of preceding hours	9
Evaluation of mechanical properties and structural behaviour of concrete pavements produced with virgin and recycled aggregates: an experimental and numerical study	9
Analysing the potential use of a low-grade magnesium carbonate by-product as a filler in hot asphalt mixtures	9
Investigation of factors affecting bond strength of thin epoxy overlay pavements	8
Harnessing expanded polystyrene waste for sustainable construction: NBO-HDLNN approach	8
Automatic pavement crack detection using multimodal features fusion deep neural network	8
A review on the impacts of connected vehicles on pavement management systems	8
Investigation of rheological properties and modification mechanism of SBS-modified asphalt with different warm mix additives	8
Study on the effect and mechanism of oyster shell powder on asphalt	8
The design and performance evaluation of low-noise rubber-fibre micro-surfacing pavement	8
Synthesising climate and traffic factors for pavement regionalisation in China	8
Exploring the role of extreme thermal conditions and freeze–thaw cycling on crack growth resistance of WMA mixes: an analytical and statistical analysis	8
Numerical analysis on mechanical characteristics of an ultra-thin wear course in asphalt pavement: impacts of material modulus and thickness	8
Effect of air voids on the fracture resistance of HMA in the indirect tensile cracking (IDEAL-CT) test	8
Design of widened and existing pavements for expressway widening and reconstruction: achieving long-life targets under differential settlement effects	8
Low-temperature performance investigation of epoxy asphalt based on fractional viscoelastic model: flexural creep behaviour and evaluation indicators	8
Correction	8
Feasibility study of seawater concrete pavements to reduce potable water demand for construction	8
Simulation of structures under consecutive moving loads by an ALE formulation	8
Evaluation of internal structure of asphalt mixtures compacted using a virtual gyratory compactor	8
Sustainable cement alternatives utilizing geopolymer for use in full depth reclamation of asphalt pavements	8
Performance and environmental evaluation of recycled mixtures consisting of waste cooking oil as a rejuvenator	8
Climate zoning of asphalt pavement based on spatial interpolation and Fuzzy C-Means algorithm	8
Effect of void ratio and rubber particles on the noise reduction mechanism and comprehensive performance of porous elastic road surface	8
Plastic strain rate in granular materials as a function of stress history: a probabilistic approach for the PBD model	8
Analysing Witczak 1-37A, Witczak 1-40D and Modified Hirsch Models for asphalt dynamic modulus prediction using global sensitivity analysis	8
Study on preparation and properties of GA/h-BN modified road petroleum asphalt based on ball milling method	8
Pyrolysis kinetics and pyrolysis-generated VOC emissions characteristics of thermally aged asphalt	8
Damage modes and failure mechanisms of airport runways under blast loading	8
Modification of MEPDG rutting model based on RIOHTrack data	8
Enhancement of highly expansive subgrade with metabentonite and nano-waste additive-based geopolymers	8
Effects of maintenance, traffic and climate condition on International Roughness Index of flexible pavement	8
Rutting performance of cement-treated base and hot mix asphalt layer in flexible pavements containing recycled concrete aggregates	8
Improvement strategies of cement concrete pavement structure on part-fill and part-cut subgrade	8
Study of hot mix asphalt viscoelasticity using spent fluid catalytic cracking or recycled polyethylene terephthalate	8
Investigating the influence of fine RAP on bituminous mixtures at the mastic scale: viscoelastic analyses and micromechanical modelling	8
Assessment of various polymeric sulphur as soft bitumen improver for pavement applications	8
Investigation of the effect of acid sludge neutralization treatment on producing a sustainable eco-friendly additive for bituminous composites	8
Relationship between backcalculated dynamic modulus, estimated dynamic modulus, and fatigue damage in asphalt concrete	8
Effect of nonlinear stress-dependency and cross-anisotropy on the backcalculation outputs from the TSD deflection slopes and the effect on estimated pavement performance	8
Preparation of chemical-physical hybrid crosslinking double network gel composite incorporated SBS modified asphalt	8
The potential of solid waste as a viable replacement for quartz sand in the ultra-high performance concrete: a comprehensive review	7
Computational analysis of ice formation on asphalt pavement incorporating phase change material (PCM)	7
Investigation of mechanical performance and voids structure of cement-stabilised macadam under freeze-thaw actions	7
Effect of dry-wet cycles on mechanical properties of polyurethane porous mixture	7
Inductive healing asphalt mixture incorporating waste steel shavings and waste ferrites for sustainable infrastructure	7
Supplementation of RHA for enhancing strength and durability of lime-treated expansive soil under challenging environmental conditions	7
A framework for predicting top-down crack initiation and growth for flexible pavements	7
Back-calculating structural internal damage of semi-rigid asphalt pavements using RIOH test track surface deflection measurements	7
Multi-scale study on the whole process adhesion behaviour of steel slag and SBS/CR composite modified asphalt	7
Investigation on the compaction process of steel bridge deck pavement based on DEM-FEM coupling model	7
ContactGAN development – prediction of tire-pavement contact stresses using a generative and transfer learning model	7
Exploring potential of Marshall-RT as simple performance test to evaluate rutting resistance of asphalt mixtures	7
Characterising Asphalt emulsion: a study of thermal and chemical properties via Thermogravimetric Analysis (TGA) and Fourier Transform Infrared (FTIR) spectroscopy	7
Gravel road classification based on loose gravel using transfer learning	7
Optimising waste cooking oil and waste engine oil as rejuvenators: a comprehensive study on recycled mixtures	7
Using machine learning and statistics for mapping BTSV boundaries from penetration and softening point requirements	7
Impact resistance of concrete pavement surface reinforced with fibre mesh	7
Parametric analysis of a dowelled construction joint for rigid aircraft pavement load transfer using finite element methods	7
Colour pervious concrete pavements applied to bikeway track: mechanical, hydraulic and functional performances	7
Effects of clogging and cleaning on sound absorption performance of rubberized porous asphalt mixture	7
Mixing carbon nanotubes with asphalt binder through a foaming process toward high-performance warm mix asphalt (WMA)	7
Carbon nanotubes for improving rheological and chemical properties of styrene–butadiene–styrene modified asphalt binder	7
Use of X-ray computed tomography to evaluate the gradual behaviour of air voids in asphalt mixtures during permanent deformation	7
Improved British pendulum test using curved slider	7
Comparative life-cycle cost analysis of flexible and rigid pavement: a case study of four Arkansas roadway sections	7
Automated crack segmentation on 3D asphalt surfaces with richer attention and hybrid pyramid structures	7
Enhancing jointed plain concrete pavement performance analysis through remote data collection on oversize/overweight vehicles: evaluating damage costs and reduced service life	7
A novel characterisation method for asphalt pavement structural performance assessment based on vehicle vibration data fusion	7
Characterisation of road base materials treated by hybrid alkali-activated binders and cationic asphalt emulsions	7
Three-dimensional spatial stress state of highway subgrade under vehicle load: experimental evidence and evaluation model	7
Performance attenuation and mechanism of basalt-fibre-reinforced concrete under fatigue load and freeze–thaw cycles	7
Construction quality impact in asphalt pavements cost: a framework based on air voids, linear viscoelastic and fatigue behaviour	7
Performance of basalt fibre reinforced concrete and resistance to shrinkage, cracking, and fatigue	7
Inverse engineering stress-dependent resilient moduli of cement-treated base materials in asphalt pavements using falling weight deflectometer	7
An enhanced method for analyzing flow number test data of asphalt mixtures	7
The influence of Multi-Layer Plastic Packaging (MPP) on the high-temperature performance of asphalt binders and mixtures using wet and dry mixing methods	7
Effects of aging on rheological, chemical, and micromechanical properties of waterborne epoxy resin modified bitumen emulsion	7
Development of temperature differential maps for rigid pavements in tropical climates for quick estimation of thermal stresses	7
Performance analysis of coloured microsurfacing with electric arc furnace steel slag as an aggregate replacement: a laboratory evaluation	7
Influence of aggregate gradation and compaction on compressive strength and porosity characteristics of pervious concrete	7
Characteristics of compressive stress around dowel joint in concrete pavement system	7