Computer Methods in Biomechanics and Biomedical Engineering

Papers
(The TQCC of Computer Methods in Biomechanics and Biomedical Engineering is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-03-01 to 2025-03-01.)
ArticleCitations
The effects of sex and landing task on hip mechanics29
Performance parametric formulation of carbon fiber-reinforced composite locking bone implant plates based on finite-element analysis29
Analytical investigation of magnetized 2D hybrid nanofluid (GO + ZnO + blood) flow through a perforated capillary26
Predicting nanofluid behavior in inflamed stenotic arteries: a neural network and finite element-Based analysis25
Comparative analysis of airflow dynamics and sputum expulsion during cough in healthy and bronchial stenosis respiratory tract25
The application of lightweight AI algorithms in postoperative rehabilitation of breast cancer24
Identifying the cancer-associated fibroblast signature to predict the prognosis and immunotherapy response in patients with lung squamous cell carcinoma22
Exploring the extension quantities of a medial collateral ligament pie-crusting model using a finite element method17
Longitudinally centered embossed structure in the locking compression plate for biodegradable bone implant plate: a finite element analysis16
Enhancing postural balance assessment through neural network-based lower-limb muscle strength evaluation with reduced markers16
Roza: a new and comprehensive metric for evaluating classification systems15
Machine learning approach in mortality rate prediction for hemodialysis patients14
Novel anchor-type proximal femoral nail for the improvement of bone-fixation integrity in treating intertrochanteric fractures: an experimental and computational characterization study14
Modeling attachment and compressive loading of locking and non-locking plate fixation: a finite element investigation of a supracondylar femur fracture model14
The impact of heat source and chemical reaction on MHD blood flow through permeable bifurcated arteries with tilted magnetic field in tumor treatments14
Authentication with a one-dimensional CNN model using EEG-based brain-computer interface14
Open-sourced semi-automatic program for ultrasound assessments of femoral trochlea cartilage health14
Development of an additively-manufactured functionally-graded expandable implant via the application of the adaptive response surface method: feasibility study on intramedullary humerus nail13
Dynamic feature selection and quantum representation for precise heart disease prediction: Quantum-HeartDiseaseNet approach13
Enhanced assessment of human dynamic stability by eliminating the effect of body height: modeling and experiment study12
3D imaging added value in the treatment and diagnosis of displaced intra-articular calcaneal fractures (DIACF): measuring the orientation of the posterior talo-calcaneal facet in the space12
Stress distribution for mandibular extra-alveolar anchorage at different angles and force magnitudes: a finite element study12
OpenColab project: OpenSim in Google colaboratory to explore biomechanics on the web12
Finite element analysis and optimization of microneedle arrays for transdermal vaccine delivery: comparison of coated and dissolving microneedles12
The influence of EEG channels and features significance on automatic detection of epileptic waves in MECT12
Coot–Lion optimized deep learning algorithm for COVID-19 point mutation rate prediction using genome sequences12
A moving boundary model for oxygen diffusion in a sick cell12
A simple and effective 1D-element discrete-based method for computational bone remodeling12
A comprehensive review on heart disease prognostication using different artificial intelligence algorithms11
A fast algebraic approach for noninvasive prediction of fractional flow reserve in coronary arteries11
Design computed torque control for Stewart platform with uncertainty to the rehabilitation of patients with leg disabilities11
Mechanical and modal analysis of different implant strategies for loss of three teeth with bone atrophy in the maxillary posterior region11
Modelling and simulation of fluid flow through stenosis and aneurysm blood vessel: a computational hemodynamic analysis11
Transmission dynamic of stochastic hepatitis C model by spectral collocation method11
Comparative analysis of non-invasive and invasive alternating electric fields therapy for malignant gliomas: a simulation study11
Effects of various cross-linked collagen scaffolds on wound healing in rats model by deep-learning CNN10
Seizure detection using nonlinear measures over EEG frequency bands and deep learning classifiers10
An efficient cardio vascular disease prediction using multi-scale weighted feature fusion-based convolutional neural network with residual gated recurrent unit10
Computer model of non-Newtonian canalicular fluid flow in lacunar–canalicular system of bone tissue10
Alterations in nasal airflow and air conditioning after endoscopic nasopharyngectomy for recurrent nasopharyngeal carcinoma: a pilot computational fluid dynamics study10
Should a low starting point be abandoned for cannulated screw fixation of femoral neck fractures?10
Identification of neutrophil extracellular trap-related genes in Alzheimer’s disease based on comprehensive bioinformatics analysis10
A time segment adaptive optimization method based on separability criterion and correlation analysis for motor imagery BCIs9
Arrhythmia detection in inter-patient ECG signals using entropy rate features and RR intervals with CNN architecture9
Estimating tongue deformation during laryngoscopy using a hybrid FEM-multibody model and intraoperative tracking – a cadaver study9
Simulation of non-Newtonian flow of blood in a modified laparoscopic forceps used in minimally invasive surgery9
Innovative approaches for coronary heart disease management: integrating biomedical sensors, deep learning, and stellate ganglion modulation9
Computational study on hemodynamic effects of left superior pulmonary vein resection and associated physiological changes in the left atrium after left upper lobectomy9
Additive manufactured gyroid-based cell structures under compression: design, testing and simulation for biomedical applications9
Driver drowsiness detection methods using EEG signals: a systematic review9
Biomechanical framework for the inverse dynamic analysis of swimming using hydrodynamic forces from swumsuit8
An optimized method for dose–effect prediction of traditional Chinese medicine based on 1D-ResCNN-PLS8
Two-screw osteosynthesis of the mandibular condylar head with different screw materials: a finite element analysis8
Estimation of non-alcoholic steatohepatitis (NASH) disease using clinical information based on the optimal combination of intelligent algorithms for feature selection and classification8
A numerical investigation of e-scooter-to-vehicle traffic accidents8
Imbalanced medical disease dataset classification using enhanced generative adversarial network8
Mechanical property of Ti6Al4V cylindrical porous structure for dental implants fabricated by selective laser melting8
Use of machine learning methods in diagnosis of carpal tunnel syndrome8
A framework for the analysis of skin sores disease using evolutionary intelligent computing approach8
Cardiac arrest prediction in smokers using enhanced Artificial Bee Colony algorithm with stacked autoencoder model8
An unsupervised learning-based guidewire shape registration for vascular intervention surgery robot7
Advancing COVID-19 stochastic modeling: a comprehensive examination integrating vaccination classes through higher-order spectral scheme analysis7
Development and validation of risk of bias tool for the use of finite element analysis in dentistry (ROBFEAD)7
Fracture resistance and failure pattern of endodontically treated maxillary premolars restored with transfixed glass fiber post: an in vitro and finite element analysis7
Cognizance detection during mental arithmetic task using statistical approach7
MKELM: Mixed Kernel Extreme Learning Machine using BMDA optimization for web services based heart disease prediction in smart healthcare7
Analysis of nitrogen metabolism-related gene expression in hepatocellular carcinoma to establish relevant indicators for prediction of prognosis and guidance of immunotherapy7
Analysis of risk factors in diabetics resulted from polycystic ovary syndrome in women by EDA analysis and machine learning techniques7
A comparative finite element analysis of artificial intervertebral disc replacement and pedicle screw fixation of the lumbar spine7
Genetic particle filter improved fuzzy-AEEMD for ECG signal de-noising7
Design of composite puncture blood collection system and research on puncture force7
Spinal joint moment prediction following simulated breast surgery using a female whole-body musculoskeletal model7
Towards a radiation free numerical modelling framework to predict spring assisted correction of scaphocephaly7
Data-driven drug treatment: enhancing clinical decision-making with SalpPSO-optimized GraphSAGE7
Estimating intracranial parameters using an inverse mathematical model with viscoelastic elements that closely predicts complex ICP morphologies7
Stability, Hopf bifurcation and control of a fractional order delay cervical cancer model with HPV infection7
Wall shear stress indicators influence the regular hemodynamic conditions in coronary main arterial diseases: cardiovascular abnormalities7
Scalable musculoskeletal model for dynamic simulations of upper body movement6
A two-fluid blood stasis model for false lumen thrombosis after type B dissection repair6
Deep survival analysis using pseudo values and its application to predict the recurrence of stage IV colorectal cancer after tumor resection6
A novel method to accurately recreate in vivo loads and kinematics in computational models of the knee6
Investigation of traffic accidents involving seated pedestrians using a finite element simulation-based approach6
Preventing stress singularities in peri-implant bone – a finite element analysis using a graded bone model6
Effect of hip flexion angle on lower limb injuries of occupants in autonomous vehicle crashes6
Multi-scale numerical simulation on mechano-transduction of osteocytes in different gravity fields6
Scalable musculoskeletal model for dynamic simulations of lower body movement6
Comparison of morphing techniques to develop subject-specific finite element models of vertebrae6
Biomechanical comparison of the effect of bilateral sagittal split ramus osteotomy with or without Le Fort I osteotomy on the temporomandibular joints of the patients with maxillofacial deformities un6
Numerical analysis of hemodynamic effect under different enhanced external counterpulsation (EECP) frequency for cerebrovascular disease: a simulation study6
Locating and sizing tumor nodules in human prostate using instrumented probing – computational framework and experimental validation6
Computational fluid dynamics study of respiratory mask for neonatal resuscitation6
Computational analysis of prosthesis production via topology optimization6
Biomechanical evaluation of Percutaneous endoscopic posterior lumbar interbody fusion and minimally invasive transforaminal lumbar interbody fusion: a biomechanical analysis6
Comparison of constitutive models for meniscus and their effect on the knee joint biomechanics during gait6
Computational modeling of inhibitory signal transduction in urinary bladder PDGFRα+ cells6
Biomechanical effects of high acceleration on the temporomandibular joint6
Design of three-section microneedle towards low insertion force and high drug delivery amount using the finite element method6
Heuristic-based channel selection with enhanced deep learning for heart disease prediction under WBAN5
Machine learning-based prediction of hip joint moment in healthy subjects, patients and post-operative subjects5
Hemodynamic analysis of hybrid treatment for thoracoabdominal aortic aneurysm based on Newtonian and non-Newtonian models in a patient-specific model5
Application of fuzzy neural network model and current-voltage analysis of biologically active points for prediction post-surgery risks5
Fluid-structure interaction simulation of the three-leaflet aortic valve using COMSOL5
Nonlinear and chaos features over EMD/VMD decomposition methods for ictal EEG signals detection5
Validation of patient-specific flatfoot models on finite element analysis5
Inverse identification of hyperelastic constitutive parameters of skeletal muscles via optimization of AI techniques5
Fluid flow effects on the degradation kinetics of bioresorbable polymers5
A novel knee joint model in FEBio with inhomogeneous fibril-reinforced biphasic cartilage simulating tissue mechanical responses during gait: data from the osteoarthritis initiative5
Estimating motion between avian vertebrae by contact modeling of joint surfaces5
Effects of different distractor positions on the formation of expansion, stress and displacement patterns in surgically assisted rapid maxillary expansion without pterygomaxillary disjunction: a finit5
Dynamical systems analysis of a reaction-diffusion SIRS model with optimal control for the COVID-19 spread5
The influence of framework material on stress distribution in maxillary complete-arch fixed prostheses supported by four dental implants: a three-dimensional finite element analysis5
Patient-specific hemodynamic analysis of IVCS-induced DVT5
Modeling and numerical analysis of fractional order hepatitis B virus model with harmonic mean type incidence rate5
Leaflet stress quantification of porcine vs bovine surgical bioprostheses: an in vitro study5
Evaluating the impact of double dose vaccination on SARS-CoV-2 spread through optimal control analysis5
The influencing mechanism of iliac vein stent implantation for hemodynamics at the bifurcation5
Impact of gravity on fluid flow and solute transport in the bone lacunar-canalicular system: a multiscale numerical simulation study5
Finite element analysis of shank and ankle with different boot collar heights in parachuting landing on inversion ground surface5
Reduction of material groups for vertebral bone finite element simulation: cross comparison of grouping methods5
Simulation analysis of different types of balloon dilatation catheters for the treatment of intracranial arterial stenosis5
Dragonfly algorithm–support vector machine approach for prediction the optical properties of blood5
Fluid-solid coupling numerical simulation of entire rat caudal vertebrae under dynamic loading5
A deep learning-based approach for distinguishing different stress levels of human brain using EEG and pulse rate4
Structure design and mechanical performance analysis of three kinds of bioresorbable poly-lactic acid (PLA) stents4
The assessment of implant shape-dependent failure mechanisms in primary total hip arthroplasty using finite element analysis4
A transcutaneous acupoint electrical simulation glove for relieving the mental fatigue of crane drivers in real building environment4
Finite element analysis of fixation effect for femoral neck fracture under different fixation configurations4
Application research of pulse signal physiology and pathology feature mining in the field of disease diagnosis4
Analysis of an environmental epidemic model based on voluntary vaccination policy4
Identification of coagulation-related genes as potential diagnostic biomarkers for pediatric septic shock4
Biomechanical evaluation of 3-unit fixed partial dentures on monotype and two-piece zirconia dental implants4
An unsupervised wavelet neural network model for approximating the solutions of non-linear nervous stomach model governed by tension, food and medicine4
Prediction of biomechanical responses of human lumbar discs - a stochastic finite element model analysis4
Investigating the informative brain region in multiclass electroencephalography and near infrared spectroscopy based BCI system using band power based features4
Quantification of the effects of robotic-assisted gait training on upper and lower body strategy during gait in diplegic children with Cerebral Palsy using summary parameters4
Identification and classification of arrhythmic heartbeats from electrocardiogram signals using feature induced optimal extreme gradient boosting algorithm4
Learning classifiers in clustered data: BCI pattern recognition model for EEG-based human emotion recognition4
Development of reduced volume endosseous cuspid tooth implant using topology optimization by SIMP technique for improved osseointegration4
TriKSV-LG: a robust approach to disease prediction in healthcare systems using AI and Levy Gazelle optimization4
Numerical investigation of unruptured middle cerebral artery bifurcation aneurysms: influence of aspect ratio4
Foetus-specific neuromusculoskeletal modelling with MRI-driven vaginal delivery kinematics during the second stage of labor4
The elastoplastic numerical model and verification by macroindentation experiment of femoral head4
Finite element and clinical analyses of effects of a new intraoral device (VomPress) combined with extraoral RAMPA on improving the overjet of craniofacial complex4
Investigating the effects of stimulus duration and inter-stimulus interval parameters on P300 based BCI application performance4
Simulated muscle activity in locomotion: implications of co-occurrence between effort minimisation and gait modularity for robot-assisted rehabilitation therapy4
An inverse analysis procedure for characterizing the homogeneous skull model used for predicting blast-induced brain response4
EEG signal classification of tinnitus based on SVM and sample entropy4
Impact of radiation therapy on healthy and cancerous cell dynamics: a Mathematical analysis4
A high-fidelity biomechanical modeling framework for injury prediction during frontal car crash4
Comparison of head impact frequency and magnitude in youth tackle football and ice hockey4
Three-dimensional finite element analysis of retracting pathological migration of the right upper central incisor with a clear aligner4
Fractional dynamics and stability analysis of COVID-19 pandemic model under the harmonic mean type incidence rate4
Multimodal sentiment analysis leveraging the strength of deep neural networks enhanced by the XGBoost classifier4
Epilepsy EEG signals classification based on sparse principal component logistic regression model4
Feasibility study on using house-tree-person drawings for automatic analysis of depression4
Predicting the effective compressive modulus of human cancellous bone using the convolutional neural network method4
Seizure prediction based on improved vision transformer model for EEG channel optimization4
Platelet adhesion potential estimation in a normal and diseased coronary artery model: effects of shear stress magnitude versus shear stress history4
A computational design of experiments based method for evaluation of off-the-shelf total knee replacement implants4
Analysis of the human liver model through semi-analytical and numerical techniques with non-singular kernel4
Optimizing the design of axial flow pump blades based on fluid characteristics4
Study of heat sink effect of blood in a bifurcated vessel4
A three-dimensional measurement based on CT for the posterior tilt with ideal inter-and intra-observer reliability in non-displaced femoral neck fractures4
Intraoperative interaction modeling between surgical instruments and soft tissues in neurosurgery based on energy functions4
An interaction model for predicting brace migration and validation through walking experiment4
A penalty method for constrained multibody kinematics optimisation using a Levenberg–Marquardt algorithm3
Dynamics of a delayed stochastic epidemic model with double epidemic hypothesis and saturated incidence3
Biofidelity assessment of the GHBMC M50-O in a rear-facing seat configuration during high-speed frontal impact3
Effect of ossicular chain deformity on reverse stimulation considering the overflow characteristics of third windows3
Discovering effect of intuitionistic fuzzy transformation in multi-layer perceptron for heart disease prediction: a study3
A comparative analysis of dimensionality reduction surrogate modeling techniques for full human body finite element impact simulations3
Development of a flexible instrumented lumbar spine finite element model and comparison with in-vitro experiments3
Developing commotio cordis injury metrics for baseball safety: unravelling the connection between chest force and rib deformation to left ventricle strain and pressure3
Assessment of lumbar disc herniation-impaired gait by using IMU data fusion method3
Finite element analysis of the cervical spine: dynamic characteristics and material property sensitivity study3
An effective healthcare monitoring system in an IoMT environment for heart disease detection using the HANN model3
Extinction and persistence of a stochastic delayed Covid-19 epidemic model3
Bone stress and damage distributions during dental implant insertion: a novel dynamic FEM analysis3
Overset meshing in combination with novel blended weak-strong fluid-structure interactions for simulations of a translating valve in series with a second valve3
Radiation-induced changes in load-sharing and structure-function behavior in murine lumbar vertebrae3
A novel method for assigning bone material properties to a comprehensive patient-specific pelvic finite element model using biplanar multi-energy radiographs3
A biomechanical analysis of novel endovascular implants for aortic valve replacement and ascending aortic repair3
Automated prediction of COVID-19 mortality outcome using clinical and laboratory data based on hierarchical feature selection and random forest classifier3
On inlet pressure boundary conditions for CT-based computation of fractional flow reserve: clinical measurement of aortic pressure3
Effect of different helmets against ground impact based on the in-depth reconstruction of electric two-wheeler accidents3
Intrinsic factors contributing to elevated intra-abdominal pressure3
New method for reducing viscosity and shear stress in hydrogel 3D printing via multidimension vibration3
Relationship between mechanical and microstructural parameters of rat lumbar spine in different ages3
Evaluation of nasal function after endoscopic endonasal surgery for pituitary adenoma: a computational fluid dynamics study3
Analytical study for prediction of stress distribution on orthodontic archwire considering short-term stress loss3
Comparative study of plaque surface temperature and blood heat transfer in a stenosed blood vessel with different symmetrical configurations3
Bioinformatics analysis of the role of lysosome-related genes in breast cancer3
Simplifying two-vector mechanics calculations for challenging tooth movements3
Application of higher-order theories on the propagation of bulk waves in bio-composite plates lying on Kerr substrate3
Influence of sequential opening/closing of interface gaps and texture density on bone growth over macro-textured implant surfaces using FE based mechanoregulatory algorithm3
The impact of intrinsic muscle properties on simulated reaching performance3
Importance of impact boundary conditions and pre-crash arm position for the prediction of thoracic response to pendulum, side sled, and near side vehicle impacts3
Study on chest injury and bulletproof vest protection under the combined action of blast wave and fragments3
A peridynamic formulation for nonlocal bone remodelling3
Hemodynamic analysis of unilateral and bilateral renal artery stenosis based on fluid-structure interaction3
Enhancing drug discovery in schizophrenia: a deep learning approach for accurate drug-target interaction prediction – DrugSchizoNet3
Digital twin-driven dynamic monitoring system of the upper limb force3
Study of fatigue damage to the cochlea3
Morphological analysis of the temporomandibular joint in patients with anterior disc displacement3
Computational modeling of stretch induced calcium signaling at the apical membrane domain in umbrella cells3
Prosthetic control system based on motor imagery3
Longitudinal investigation of aortic dissection in mice with computational fluid dynamics3
Exploring uncertainty in hyper-viscoelastic properties of scalp skin through patient-specific finite element models for reconstructive surgery3
Breathing rate estimation based on multiple linear regression3
Developing a method for quantifying hip joint angles and moments during walking using neural networks and wearables3
Effect of rheological models on pulsatile hemodynamics in a multiply afflicted descending human aortic network3
Finite element analysis and nanomechanical properties of composite and ceramic dental onlays3
A simulation-based study for optimizing proportional-integral-derivative controller gains for different control strategies of an active upper extremity model using experimental data3
Stress distribution on implant- supported zirconia crown of maxillary first molar: effect of oblique load on natural and antagonist tooth3
Stiffness estimation of transversely anisotropic materials using a novel indentation tester with a rectangular hole3
Design and finite element analysis of femoral stem prosthesis using functional graded materials3
Design of titanium uncemented femoral stems for hip prosthesis suitable for the Colombian young adult population3
Mechanics of ascending aortic aneurysms based on a modulus of elasticity dependent on aneurysm diameter and pressure3
Effect of the medial collateral ligament and the lateral ulnar collateral ligament injury on elbow stability: a finite element analysis3
An analysis of the relationship between microneedle spacing, needle force and skin strain during the indentation phase prior to skin penetration3
0.14502191543579