International Journal of Polymer Analysis and Characterization

Papers
(The median citation count of International Journal of Polymer Analysis and Characterization is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)
ArticleCitations
Assessment of thermal, crystalline and morphological properties of ellagic acid incorporated PVA, chitosan, PVA/chitosan and PVA/chitosan/gaur gum polymeric films34
Synthesis, molecular interactions, and antioxidant properties of a new terpolymer: formation of epoxy-based terpolymer composite on glass21
Surface reactivity of polypropylene grafted with carboxylate groups (COO − ) in the competitive adsorption of Pb 2+ , Cu 19
Fabrication and performance of short glass fiber reinforced polyamide composites19
Structural degradation of polyallyl diglycol carbonate (PADC) polymer: analytical characterization and simulation studies18
Characterization and mechanical strength of wholly aromatic liquid crystalline polymers with low melting point17
Structural, thermal, and optical studies of synthesized donor/acceptor copolymers based on hexylphenyl-functionalized cyclopentadithiophene16
Extraction, characterization, and evaluation of galactomannan from Barbatimão Verdadeiro as a potential additive for enhanced oil recovery fluids13
Enhanced characterization of the chemical structure of high-density polyethylene by size exclusion/thermal fractionation on poly(styrene-co-divinylbenzene) columns13
Attenuated total reflectance-mid infrared spectroscopy combined with chemometrics: rapid assessment tool for the characterization and discrimination of papers based on their fiber contents12
Preparation and opto-electrical characterization of poly(ethylene oxide) based polymer blends for electrochemical applications12
Effect of thermal ageing on electrical, mechanical properties of glass fiber reinforced polymer and its impact on service life12
Branching analysis of β-cyclodextrin-based poly(N-isopropylacrylamide) star polymers using triple detection SEC12
Effect of shock wave impact on natural chitosan biopolymer11
A novel approach to design sodium-ion conducting ternary solid polymer blend electrolytes (TSPBEs): structural, conductivity, and relaxation dynamics11
Hyphenation of ultra-high-performance liquid chromatography and ion mobility mass spectrometry for the analysis of sequence-defined oligomers with different functionalities and tacticity11
The relationship between thermal, rheological, and tack properties of copolyester-based hot melt adhesives11
Chondrocyte cell adhesion on chitosan supports using single-cell atomic force microscopy10
Polyamide 66/poly(2,6-dimethyl-1,4-phenylene oxide) compatibilization with styrene–acrylonitrile–glycidyl methacrylate: rheology, morphology, and mechanical properties10
Silver-graphene oxide nanocomposite-doped chitosan/PVA membrane for water treatment of Acid Blue 324 dye9
Biobased polyesteramides derived from bisfuranic diamine and aliphatic diesters of varied chain lengths: synthesis and chemical stability8
Characterization of fire-retardant composites from waste materials: balancing properties and performance8
Influence of the processing parameters on the degradation of poly(lactic acid) (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and modification of their molecular weight using chain exte8
Impacting different structures of injectable pluronic-conjugated alginate (chitosan) hydrogels on their physicochemical characteristics and morphological fibroblast behavior7
Improving flame resistance and shielding properties for cross-linked polyethylene (XLPE) using nanoclay filler6
Insights to structural, morphological, thermal and spectroscopic properties of chitosan biopolymer functionalized with extracted dye of discarded Bougainvillea brackets (DBG) steps6
Determination of dielectric performance and surface heteromorphology in single-walled carbon nanotube/vinylester polymer composites by fractal approaches6
Effect of dimethylamine pyrophosphate on the mechanical, thermal decomposition and flame-retardant properties of rigid polyurethane foams6
Spectroscopic studies on the formation of different diastereomers in polyesters based on nadic acid6
A comprehensive study on the mechanical qualities of FDM 3D printed coconut wood-polylactic acid composite6
Effect of titanium dioxide nanoparticles on the dielectric, thermal, and corrosion resistance properties of polyimide (PI) nanocomposites6
Microwave resonant probe-based nondestructive detection of cold weld defects in HDPE pipe butt fusion joints6
Synthesis of PPy/CeO 2 nanocomposites for supercapacitor application6
Degradation study of CPVC pipe subjected to bursting tests and prediction of service life5
Influence of irradiation on modifying the surface wettability and optical characteristics of flexible polymer composite films for optoelectronic devices5
Synthesis of macromolecular brush and its thermal degradation studies5
A comparative study of the mechanical and thermal properties of EPDM rubber/cement kiln dust composite cured by ionizing radiation5
Preparation and luminescence properties of polypyrrole-thiophene derivatives5
Effect of copper and zinc ions on type I collagen self-assembly5
Esterified guar gum: synthesis, characterization, and evaluation as excipient for mouth dissolving tablets5
Development and application of gelatinized starches as wall materials for Lacticaseibacillus paracasei encapsulation5
Monte Carlo simulations of proton irradiation effects on PTFE, KEVLAR, EFTE, DYNEEMA, and NOMEX polymeric materials used in astronaut space suits5
Impact of cellulose supramolecular structure on its carboxymethylation reaction activity4
Thermal decomposition kinetic study on one-pack formulations of epoxy resin cured with novel phosphorus-containing flame retardant latent curing agents4
A new method for selecting and evaluating the hyperelastic model of tread rubber material under rolling contact condition4
Preparation and characterization of novel transparent and foldable polymers modified with Cr(III), Co(II), Ni(II), and Cu(II) complexes4
Development of poly(lactic acid) nanocomposite films with kaolin/bentonite blended clay for packaging appli4
Fabrication of silicone foam/polytitanosiloxane composite with enhanced flame retardancy4
Synthesis and characterization of glyceryl starch and determination of molar substitution4
Combined kinetic analysis of thermal degradation characteristics and reaction mechanism of thin intumescent fire-retardant coating of steel structure4
Improved flow cell design for a more performant Gel Permeation Chromatography – Fourier Transform infrared (GPC-FTIR) analysis4
Development of hydrophobic filament for fused deposition modeling via single screw extruder4
Graft copolymerization of carboxymethylcellulose with solketal acrylate4
High-performance biodegradable triboelectric nanogenerators using CoFe 2 O 4 filled poly (butylene adipate-co-terephthalate)4
Technique for measuring the low pull-out forces of bonded fibers: application to glue-based false eyelashes4
Evaluation of shape recovery stress and motion derivatives in 4D printed shape memory polymers for actuator application4
Mixing strategy and tensile strength characterization of WTR-PP composite4
Development and characterization of DGEBA-APTES-ZrO 2 nanocomposite coatings for anti-corrosion and anti-fouling3
Exploring the material and mechanical characteristics of 3D printed composites utilizing nSiO 2 -particulate-reinforced PLA/HDPE filaments with potential application3
UV resistance and biodegradation of PLA-based polymeric blends doped with PBS, PBAT, TPS3
Resveratrol-loaded polycaprolactone scaffolds obtained by rotary jet spinning3
Thiol-functionalized CeO 2 in PPy-CeO 2 nanocomposites with improved electrochemical performance for supercapacitor applications3
Enhancing the structural, optical, and dielectric properties of GNP-reinforced PVC/PMMA polymer nanocomposites for capacitive energy storage applications3
Synthesis and characterization of novel poly(urethane-amide)s with enhanced thermal stability3
Alkyd resins from Argemone mexicana seed oil: synthesis and characterization for use in anticorrosive coating applications3
Polymer-based wearable nano-composite sensors: a review3
Role of alkylimidazolium chloride ionic liquid as multifunctional additive for carbon black filled natural rubber composites3
Structural, mechanical, thermal characterizations of Agave sisalana fiber- reinforced composite and finite element analysis of composite helical compression spring3
Synthesis of decorated polyborosiloxane for enhancing the flame retardancy and mechanical property of epoxy resin3
Mechanical, Thermal, and Water Absorption Behavior of Ash Gourd ( Benincasa Hispida ) Peel Particles Filled Epoxy Composites3
A green chemistry of the polymerization of methyl methacrylate (MMA) and a new copolymer of propylene oxide (PO) using natural catalysts3
Experimental evaluation and numerical comparisons of pine tree leaves, graphene oxide loaded, and E-glass fiber reinforced sandwich composites3
Effect of silane coupling agent on the ultraviolet weathering behavior of polylactic acid based composites3
Properties of hydrated poly(2-methoxyethyl acrylate) observed by 13C-nuclear magnetic resonance spectroscopy2
Recent developments in composite reinforcement using date palm fibers for improved performance through physical and chemical modifications2
Effect of extension speed on the mechanical performance of sisal and coir fiber bundles2
Biofilm-resistant urethane-linked poly (methoxyethyl acrylate) copolymer films with enhanced durability and self-healing capabilities2
Study on water properties and spatial structure of water in poly(2-methoxy ethylacrylate)s with different molecular weights by nuclear magnetic resonance spectroscopy2
Hematite (Fe 2 O 3 )-modified biopolymer for Rhodamine B degradation under visible light2
Comparison of principal component regression (PCR) and partial least square regression (PLSR) modeling methods for quantifying polyethylene (PE) in recycled polypropylene (rPP) with near-infrared spec2
BaTiO3-assisted rGO-based flexible thin films for energy storage applications2
Development of PCL/cellulose acetate blended membranes and modified with Libidibia ferrea extract2
Influence of structural disorder on the elastic, frictional, and electrical properties in functionalized polyaniline thin films at the nanoscale investigated by atomic force microscopy2
Synergistic effect of combining amino trimethylphosphonate calcium and expandable graphite on flame retardant and thermal stability of rigid polyurethane foam2
Newsprint microcrystalline fibers activated by different coupling agents and electron beam irradiation as filler for styrene-butadiene rubber-based composites2
Fabrication of hydrolyzed keratin-modified rigid polyurethane foams and its thermal stability and combustion performance2
Preparation of poly(tetrahydrofuran-co-epichlorohydrin) and measuring the ceiling temperature in phosphotungstic acid catalytic system2
Fabrication, structure and optical characteristics of CuO/polymer nanocomposites materials for optical devices2
Fabrication of poly (1,4-phenylene ether ether sulfone) modified with MWCNTs/reduced (GO-oxSWCNTs) NCs for enhanced antimicrobial activities2
Synthesis and properties of functional methacrylic copolymers2
Optoelectronic characteristics of PVA: Fe 3 O 4 magnetic nanocomposite films2
Synthesis, rheological and thermal studies of Gum ghatti-cl-poly(acrylic acid) hydrogels containing CoFe 2 O 4 nanoparticles2
Evaluation of dimensional stability, setting time, tensile strength, and rheological properties of kaolin clay incorporated alginate impression material2
Simulation and optimization of supported Ziegler–Natta catalyst preparation based on AI approach coupled with genetic algorithm2
Natural film based on collagen and sulfated polysaccharide for antiplatelet effects2
Structural and electrochemical properties of NH 4 SCN-doped almond gum biopolymer electrolytes2
Forensic evaluation of 10 types of rubber popularly used with Fourier transform infrared (FTIR) spectroscopy2
Moisture diffusion analysis and their effects on the mechanical properties of organic particle filled natural fiber reinforced hybrid polymer composites2
Micromechanics and experimental analysis of randomly oriented flax fiber reinforced with recycled EPS waste composites2
Eliciting impact of nano-clay reinforcement and processing schemes on polyurethane chain dynamics by gold sputtering patterns (GSPs)2
Studies on phosphorous based acrylate vinyl ester resin2
Fast and energy efficient crosslinking of PVA to make water resistant coating using glutaraldehyde2
Contrasting role of carbon nanofillers in electrical conduction and mechanical strength of epoxy composites: an investigation2
Biocompatible nanocomposite production via nanoclays with diverse morphology2
DSC assisted kinetic analysis on the urethane network formation between castor oil based ester polyol and poly(methylene di phenyl isocyanate) (pMDI)2
The study of recovery phenomena via nanoindentation for different cross-linked SU-8 thin films at room temperature2
The electrical properties of NH 4 SCN (ammonium thiocyanate) ion in combination with natural gum rosin and cellulose acetate blend for solid polymer electrolyte2
Fabrication, optical behavior and structural characteristics of the poly (4-chloroaniline)/silver nanoparticles materials for optical devices1
Effect of pentaerythritol derived phosphorous based bicyclic polymer on the flammability1
Preparation and characterization of silicone oligomer modified polyurethane acrylates for leather finishing1
Performance appraisal of a cross-linked polymer prepared by gamma radiation for the removal of copper and its binding mechanism1
Investigating the effect of glass filler on the aging behavior of polymer powders for additive manufacturing1
Infill strategies for improving the impact behavior of polymer composites utilizing statistical and thermal analysis1
Correction1
Investigate the effect of short chain branching and lamellar thickness on mechanical and optical properties of linear low-density polyethylene by successive self-nucleation/annealing (SSA) technique1
Sustainable starch-based bioplastics reinforced with carob filler: characterization and biodegradability assessments1
Performance improvement of a modified copolymer as an antiscalant and microbial growth inhibitor1
Effect of activated carbon from oil palm empty fruit bunches on the tensile strength of abaca fiber-reinforced epoxy composites1
Disordered peptide-based design of intrinsically disordered polymers for biomedical applications1
Development of visible-light driven photo-switching copolymers with pH indicating performance1
Structure and properties of aromatic naphthalene thermotropic liquid crystal copolyester/MWCNT composites1
Microwave absorption and dielectric behavior of lead sulfide – graphene composite nanostructure embedded polyvinylidinedilfuoride thin films1
Assessment of physical and mechanical and tribological characteristics of poly methyl methacrylate denture based composites doped with nano ceramic particles: a review1
Hybrid benzoxazines from natural bio-phenolics for enhanced thermal stability and hydrophobicity: a study on vermiculite reinforced composites with low dielectric constant1
Electron beam irradiated composite based on poly (lactic acid)/aloe vera and its applications in biodegradable food packaging1
Study of the effect of electric field on the charge states of polypropylene doped with ZrO 2 nanoparticles by the TSD method1
Investigation of the mechanical behavior of AL7075 plate supported hybrid composite plates using artificial neural networks algorithm1
Hybrid polymer composites of Terminalia chebula filler reinforced thermal and mechanical characterization of bagasse/tamarind seed1
Immobilization of α-amylase on electrospun polycaprolactone (PCL)/chitosan (CHI) nanofibers: a novel approach to improve enzyme stability and performance1
Investigating the influence of grafting yield on the optical and structural properties of polyamide-6 fibers using the fringe-field interference techniques1
Automated thermographic monitoring of crack growth in short fiber reinforced polymers under cyclic loading1
Investigation of thermal, mechanical and dielectrical properties of LiYO2 filled poly(lactic acid) nanocomposites1
Research on temperature field during the hot pressing process of UHMWPE-based water-lubricated bearing1
Enhanced bioactivity of regenerated eggshell membrane hydrogels with strontium-doped hydroxyapatite for potential bone tissue regeneration1
Core-shell magnetic molecularly imprinted polymers based on Fe 3 O 4 @SiO 2 –C = C carrier for 1
Optimization of Yucca filamentosa fiber based graft copolymer through response surface methodology and evaluation of physico-chemical properties1
LIG-based flexible interdigitated micro-supercapacitor cell with PANI-p-TS electrosynthesized in acetonitrile: influence of perchlorate-based electrolytes1
Aging behaviour of encapsulated assemblies of epoxy resin under accelerated thermal cycling1
Effects of oxygen irradiation on the electrical properties of polyethylene oxide/nickel oxide composite films1
Effect of NaOH and silane treatment on short Raphia vinifera fiber bio-epoxy composites1
0.36441516876221