Macromolecular Chemistry and Physics

Papers
(The median citation count of Macromolecular Chemistry and Physics is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
Polymerization‐Induced Emission and Specific Detection to Cu2+ Ions of Polyacrylates with Morpholine Structure108
Masthead: Macromol. Chem. Phys. 21/202288
Influence of Cooling Rate on the Temperature Rising Elution Fractionation of One Poly(1‐butene‐co‐ethylene) Resin and Microstructure of Its Fractions74
Masthead: Macromol. Chem. Phys. 18/202255
Creation of Thermal Response Ordered Mesostructure Polymer Particles Using Diblock Copolymers via 3D Confined Self‐Assembly45
Potential of Small‐Angle Neutron Scattering for Evaluating Protein Locus within a Polymersome45
Efficient Stabilization and Directional‐Controlled Release of Vitamin C in Disaccharide/Megasaccharide Composite Xerogels39
Issue Information: Macromol. Chem. Phys. 10/202539
The Use of Biodegradable Poly(ε‐Caprolactone) as a Matrix for Preparing Micro‐Composites with NdFeB Recycled Magnetic Particles38
Stereoselective Ring‐Opening Metathesis Polymerization with Tungsten Sulfido Alkylidene N‐Heterocyclic Carbene Complexes37
Influence of Tacticity on the Structure Formation of Poly(methacrylic acid) in Langmuir/Langmuir–Blodgett and Thin Films35
Preparation of a Novel Sorbent Based on Pickering Emulsions Polymerization Method for Encapsulating Extractants and the Adsorption of Indium in an Aqueous Solution34
A Novel Route to Glass Fiber‐Reinforced Epoxy Matrix Composites: Visible Light Activated Radical Induced Cationic Frontal Polymerization30
Thermomechanical Degradation of Polypropylene – Polystyrene Blends During Extrusion‐Based Melt Blending – A First Survey of Shear‐Induced Molecular Architecture Changes29
Comparing Microwave and Classical Synthesis of Oxymethylene Dimethyl Ethers29
28
Low‐Molecular‐Weight Lignin Derived from Cotton Stalks via γ‐Valerolactone Pretreatment for High‐Performance Hydrogel Fabrication27
Photoinitiating Ability of Pyrene–Chalcone‐Based Oxime Esters with Different Substituents26
Surface Engineering of Polymer Hydrogels Toward Functional Soft Material Innovations26
Quercetin‐Based Magnetic Porous Organic Polymers for Efficient Adsorption of Phenolic Pollutants25
25
Development of Gum Tragacanth‐Based Graft Copolymer Hydrogel for the Adsorptive Removal of Dyes from Wastewater25
Fast Degradable and Thermally Conductive Silicone Rubber Vitrimer with Low Dielectric and UV‐Shielding Properties25
Electrospun Polyacrylic Acid‐Functionalized Poly‐Cyclodextrin Fibers for Efficient Heavy Metal Removal from Water25
Polymers with Pendant Water‐Soluble Tetrafluorobenzene Sulfonic Acid Activated Esters: Synthesis, Stability, and Use for Glycopolymers in Water24
Chitosan Oligosaccharide Based Waterborne Polyurethane with UV Resistance and Oxidation Resistance for Functional Fabric23
Fluorescent Polymeric Materials for Bacterial Interaction and Detection23
Pre‐Treatment Effects on Isothermal Crystallization Behavior of Isotactic Polypropylene23
A “Limited Aggregation Model” to Predict the Size of Acrylamide‐Based Microgels Synthesized with Ionic Surfactants22
Fight Aβ Aggregation with Molecular Aggregates21
Combining Cryogel Architecture and Macromolecular Crowding‐Enhanced Extracellular Matrix Cues to Mimic the Bone Marrow Niche20
High Thermal Conductivity and Low Dielectric Constant of Polyesters Based on Fluorine and Mesogenic Unit20
Surface Eroding Methacrylic Anhydride Copolymers and Model Drug Release20
Issue Information: Macromol. Chem. Phys. 7/202620
Masthead: Macromol. Chem. Phys. 7/202419
Structure–Property Relationships of Solution‐Processable Diarylethene‐Based Main‐Chain Photochromic Polymers19
Efficient Stabilization and Directional‐Controlled Release of Vitamin C in Disaccharide/Megasaccharide Composite Xerogels18
Influence of Hot‐Press Temperature on β‐Phase Formation and Electrical Properties of Solvent‐Casted PVDF‐HFP Co‐Polymer Films Prepared from Two Different Solvents: A Comparison Study18
Masthead: Macromol. Chem. Phys. 2/202418
Shaping the Future of Macromolecular Chemistry: A Successful Path from the Start18
Research Progress of High Performance and Functional Photocurable Resins Derived from Biomass17
17
n‑Type Polymer Thermoelectric Materials Based on Benzodifurandione and F‐Substituted Thiophene Derivatives Synthesized via Direct Arylation and Aldol Polycondensation17
16
Pyridine Isomer Effects in the Framework of Phase‐Separated Vitrimer‐Like Materials Operated with Trans‐N‐Alkylation Bond Exchange of Quaternized Pyridines16
High Ion Conducting Dobule Network Crosslinked Gel Polymer Electrolytes for High‐Performance Supercapacitors16
Study of Ion Transport in Novel Protic Polymerized Ionic Liquids and Composites16
Correction to Effect of Chitosan on the Microstructural Properties of Zinc Ferrite Nanoparticles15
Interpenetrating Hybrid Particles of Polyurethane and Polymethacrylates Synthesized by a “One‐Pot” Tandem Step‐Growth and Radical Polymerizations15
Efficient Curing of Benzoxazine‐Epoxy Resins: Catalytic Strategies for Lowering Energy Consumption and Kinetic Analysis15
Dynamic Mechanical Spectroscopy with Cylindrical Geometry: Application to the Comparison of Various Plasticizers of Thermoplastic Starch15
Effects of Catalyst Activation, Deactivation, and Active Site Physical Residential Environment on Ethylene− α ‐Olefin Elastomeric Copolymerization15
Polymer Membrane‐Based Pervaporation Process for Separating Organic Mixture by Molecular Simulation15
Preparation of Emulsion Hydrogels Encapsulating P204 by the Pickering Emulsion Templates for the Adsorption of Ce(III) in Aqueous Solutions14
Controlled Release of a Hydrophobic Fluorescent Molecule From Polyvinyl Alcohol/Polycaprolactone Composite Thin Films14
Hydrosilylation of Alkynes Under Continuous Flow Using Polyurethane‐Based Monolithic Supports with Tailored Mesoporosity14
Marangoni‐Driven Patterning in Polymer Thin Film Supported on Shrinking Substrate for Resolution Enhancement14
Curing Behavior of Reprocessable Epoxy Vitrimers: Thermal Analysis and Kinetics Modeling14
One‐Step Preparation of Ph‐Sensitive and Antibacterial Calcium Alginate Fibers: In Situ Reduction Method and Original Solution Dyeing14
Investigation of the Microscopic Dual‐Diffusion Process of PAN Solution and the Formation Mechanism of PAN Fibers with “Fibrils within a Filament”14
PNIPAM‐Based Copolymer Microgels as Nanoreactors for the In Situ Synthesis of Gold Nanoparticles13
Effect of Surface Properties of Nanoparticles on the Crystallization Behavior of Polypropylene/Polypropylene‐g‐Silica Nanocomposites13
13
Toward In Vitro Vascular Wall Models: Digital Light Processing of Acrylate‐Endcapped Urethane‐Based Polymers into Tubular Constructs13
Side Chain Engineering of Amphiphilic Conjugated Polymer Nanoparticles for Biofilm Ablation13
Preparation and Properties of Polysaccharide‐Based Epoxy Vitrimers13
Cyanate Ester Polymerization: Overview of Mechanistic and Kinetic Aspects13
Synthesis and Characterization of Highly Thiolated Silk Fibroin13
Room‐Temperature Lewis Acid Organocatalysts for Bulk Ring‐Opening Polymerization of Bis‐Lithium N‐Heterocyclic Carbenes Complexes Activated on ε‐Caprolactone: Synthetic, Experimen13
Polyolefin‐Based Anion Exchange Membranes with Superior Performance and Long‐Term Durability for Green Hydrogen Production13
Effect of Confinement Geometry on Semiflexible Linear Polymer Conformations: A Computational and Simulation Study13
Recent Progress in Polymers with Dynamic Covalent Bonds13
Obituary – Prof. Dr. Yusuf Yagci (1952−2023)13
Evaluation of Biocompatible Films Using Copolymers of N‐Vinylbenzamide with Cationic Moieties by Hydrolysis of N‐Vinylformamide12
High‐Performance Supramolecular Adhesives12
Characterization and Selection of Tailorable Heat Triggered Epoxy Shape Memory Polymers for Epoxy Debondable Adhesives12
Grafting of POSS Hybrid Nanoparticles onto Poly(Vinyl Chloride) via Diels‐Alder Click Reaction12
Glass Vials Coated with Polymer‐Supported‐Catalysts as Reaction Vessels: Stir, Pour, Rinse and Reuse12
Electrical/Spectroscopic Stability of Conducting and Biodegradable Graft‐Copolymer12
Effect of Hofmeister Salts on the LCST of Poly(diethyl vinylphosphonate) and Poly(2‐vinylpyridine‐block‐diethyl vinylphosphonate)12
Composite Polymer Electrolytes Based on Silicon Dioxide Nanoparticles for Lithium Metal Batteries12
12
Issue Information: Macromol. Chem. Phys. 9/202512
12
RAFT Synthesis of Self‐Assembled Poly(Acrylic Acid)‐b‐poly(N‐Acryloyl‐L‐Tryptophan) Polymer: Investigating Micelle Formation and Biocompatibility12
Chloride Ion‐Containing Polymeric Ionic Liquids for Application as Electrolytes in Solid‐State Batteries12
Masthead: Macromol. Chem. Phys. 11/202412
The Decisive Role of Confinement in Enhancing or Suppressing Self‐Nucleation in Polyethylene‐Containing Block Copolymers11
Synthesis of Ultra Microporous Crystalline Polymers from 1, 3, 5, 7‐Tetraphenyladamantane and Trichlorotriazine for Adsorption of Rhodamine B and Malachite Green11
Revealing the Effect of the Length of Chains on Rubber Mechanical Properties by the Two‐Component Quantum Mechanical Gaussian Model11
Research Progresses in Methods for Improving the Properties of Dynamic Covalent Polymer Networks11
Amino Acid‐Derived Smart and Functional Polymers for Biomedical Applications: Current Status and Future Perspectives11
11
Topological Effects on Cyclic Co‐Poly(ionic liquid)s Self‐Assembly11
Precision Design of Sequence‐Defined Polyurethanes: Exploring Controlled Folding Through Computational Design11
Thermochromic Composite as a Dual‐Functional Enhancer in Conductive Hydrogels11
Development and Characterization of High‐Resolution Tissue Scaffolds via LCD 3D Printing Using PVA‐SbQ Modified PEGDMA‐Based Bioinks10
Next Generation of Polymer Researchers10
Synthesis of Poly[N‐(2‐((3‐Morpholino‐3‐Oxopropyl)Thio)Ethyl)Methacrylamide]: A New Thermoresponsive Polymer with Tunable LCST‐ and UCST‐Type Phase Transition in Aqueous and Alcoholic Solutions10
Front Cover: Macromol. Chem. Phys. 13/202310
Polymer Containing Multiple Secondary Structures—A Competition between Helical Induction and C‐T Complexation10
Environmentally Friendly High‐Performance Polydimethylsiloxane Composites Reinforced with Renewable Cellulose Nanocrystals Based on Dynamic Silyl Ether Linkages10
Conformation and Dynamics of Ring Polymer Chains under Cylindrical Confinement10
Biradical Initiation in Photoinitiated Copolymerization of Styrene and Maleic Anhydride10
10
Masthead: Macromol. Chem. Phys. 16/202410
Dual‐Crosslinked Antibacterial Hydrogel for Treatment of Diabetic Foot Ulcers10
Synthesis and Comparison of Linear Polymannosides for Direct Binding with Escherichia coli10
Effects of Para‐ or Meta‐Aromatic Amide Units on the Microstructure, Thermal, Mechanical, Rheological, and Dielectric Properties of Thermotropic Liquid Crystalline Poly(ester amide)s10
Pressure‐Sensitive Adhesive Tapes with High Peel Strength Derived from Linseed Oil10
Self‐Limited Hyperbranching Polymerization of Di‐N‐Phenoxycarbonyl N‐Substituted Diglycines10
Synthesis of Novel Fluorescent Conjugated Polymers and Their Rapid Gas‐Phase Detection of Trace Nitro‐Explosives10
How is the z‐Average Molar Mass Related to the Sedimentation Data?10
Effect of Varying Whey Protein in Anti‐Bacterial Gelatin/ Polyaniline Complexes Doped with Phytic Acid for Biocompatible Electro‐Conductive Films10
Investigation of X‐Rays, e‐Beam, and Gamma Irradiation on Chemical, Thermal, and Mechanical Properties of Polypropylene‐Derivatives10
Enhancing the Potential of Poly(hydroxybutyrate)/Poly(lactic acid) Films with Olive Oil and Zinc Oxide for Active Food Packaging9
Masthead: Macromol. Chem. Phys. 17/20229
Spectroscopic Investigations on Polyvinylidene Fluoride Nanofibers9
Co‐Polyamide with 2‐Pyridylquinoline Moieties in the Main Chain and Its Metal‐Polymer Complex with Cu(II) for Toluene Recovery: Synthesis, Structure, Physicochemical and Transport Properties9
NIR‐Responsive Polyurethane Nanocomposites Based on PDA@FA Nanoparticles with Synergistic Antibacterial Effect9
Masthead: Macromol. Chem. Phys. 10/20249
Synthesis of Conjugated Polymers with Controlled Terminal Structures by Direct Arylation Polycondensation and Correlation Between Terminal Structures and Emission Properties9
Emerging Concepts in Iodine Transfer Polymerization9
Aminophosphine Based Lewis Pair for the Controlled Polymerization of Methyl Methacrylate9
A Bio‐Based Branching Agent for Preparation of Crosslinked Poly(Butylene Succinate‐Co‐Terephthalate): Synthesis, Thermo‐Mechanical and Rheological Properties9
Synthesis and Study of Copolymers Bearing Two Coumarin Side Groups in Monomer Unit: Toward Photoalignment of Liquid Crystals9
Syntheses of Polyglycolide via Polycondensation: A Reinvestigation9
Synthesis of One‐Component Type II Visible‐Light‐Absorbing Chalcones Containing Fused Aromatic Rings and Investigation of Free Radical Photopolymerization Properties9
Beneficial Effect of Solvent Pressure on Homogeneity of Poly(Ester‐co‐Syringyl Methacrylate)s During Radical Ring‐Opening Copolymerization9
A Reactive, pH‐Responsive, Cleavable Surfactant for Thiol‐ene Emulsion Polymerization to Make Latex Degradable and Redispersible8
Front Cover: Macromol. Chem. Phys. 6/20248
Polymers under Multiple Constraints: Restricted and Controlled Molecular Order and Mobility8
Fabrication and Properties of Gelatin/Glycyrrhizic Acid Double‐Network Hydrogels with High Freeze Resistance8
The Use of Biodegradable Poly(ε‐Caprolactone) as a Matrix for Preparing Micro‐Composites with NdFeB Recycled Magnetic Particles8
Silica‐Supported Chromocene/ImidoVanadium Bi‐Metallic Catalysts for Bimodal Polyethylene8
Oxides and Nitrides with Asymmetric Pore Structure from Block Copolymer Co‐Assembly and Non‐Solvent Induced Phase Separation8
Flexible, Reprocessable, Thermal Conductive Reversibly Cross‐linked Polythiourethane Composites with Hybrid Fillers and Segregated Structure8
Masthead: Macromol. Chem. Phys. 20/20248
Biodegradable Magnetic Vesicles for Magnetic Hyperthermia Stimulated Drug Release8
8
Enzyme‐Responsive Porous Scaffolds by Electrospinning Polyalanine8
Preparation and Characterization of Intrinsically Compatibilized Thermoplastic Polyurethane and Silicone Rubber8
A Mechanochemically Active Metal‐Organic Framework (MOF) Based on Cu‐Bis‐NHC‐Linkers: Synthesis and Mechano‐Catalytic Activation8
Vanillin‐Based Recyclable Thermosets and their Glass Fiber Reinforced Composites8
Microstructure‐Driven Self‐Sorting of Chemically Indistinguishable Side Chains in Pre‐Programmed Alkyl Siloxanes Leading to Amplification of Mechanical Properties8
Shampoo Science: A Review of the Physiochemical Processes behind the Function of a Shampoo8
Front Cover: Macromol. Chem. Phys. 17/20248
Effect of Ionic Strength and Anion Identity on Rare‐Earth Element Chelation by Poly(acrylic acid)8
Design and Applications of Dynamic Hydrogels Based on Reversible C═N Bonds8
Structure and Phase Behavior of Interpolyelectrolyte Complexes of PDADMAC and Hydrophobically Modified PAA (HM‐PAA)8
A Mechanochemically Active Metal‐Organic Framework (MOF) Based on Cu‐Bis‐NHC‐Linkers: Synthesis and Mechano‐Catalytic Activation8
Adhesive Films from Dopamine‐Functionalized Polydimethylsiloxane Polymer Conetworks8
Amino‐containing α‐Diimine Nickel Complexes with Adjustable Electronic Properties and their Effective Use in Forming Highly Branched Polyethylene7
Divergent Synthesis of Biocompatible Nearly Monodisperse Multi‐Functional Poly(ethylene glycol) Periodic Copolymers7
Masthead: Macromol. Chem. Phys. 12/20227
Glycosylated Polymers Toward Stable Protein‐Based Lighting7
The Frontier of Plastics Recycling: Rethinking Waste as a Resource for High‐Value Applications7
7
A Phenylene‐Based Light‐Emitting Polymer: Atums Green7
Conjugated Polymers: Where We Come From, Where We Stand, and Where We Might Go7
A Robust and Thermally Stable Poly(dimethylsiloxane) Elastomer with Reprocessability Based on Dynamic Silyl Ether Linkages7
Low Cost, Biodegradable, Shape Memory PCL/POE‐g‐GMA Blends With Excellent Mechanical Properties for External Fixation7
A Route to Sulfur‐Containing Polymers via FeFe‐DMCC‐Catalyzed Copolymerization of Propylene Oxide and Carbonyl Sulfide7
7
Comb and Branch‐on‐Branch Model Polystyrenes with Exceptionally High Strain Hardening Factor SHF > 1000 and Their Impact on Physical Foaming7
MXene‐CeO2@PDA Synergistically Enhanced Anticorrosion of Waterborne Epoxy Coating7
Potential of Small‐Angle Neutron Scattering for Evaluating Protein Locus within a Polymersome7
Issue Information: Macromol. Chem. Phys. 2/20257
Enantioselective Induction of Helical Chirality in Coil‐Structured Amino Acid‐Based Polymers by Conjugated Molecules7
Photoluminescence Studies of DoF Effect on the Photopolymerization Reaction of a GelMA‐Based Monomers for Tissue Engineering7
Effective Enhancement of Thermal Conductivity and Electrical Conductivity with Poly(3,4‐ethylenedioxythiophene):Poly(4‐styrenesulfonate) through Solvent Treatment7
Synthesis of Cyclohexanecarboxylic Acid‐Based Methoxypolyethylene Glycols and Polyethylene Glycol Ester as Efficient Plasticizer for Poly(vinyl chloride)7
β ‐Diketonate Complexes of d ‐Metals as Catalysts for the Ring‐Opening Polymerization of rac 7
“Just Antimicrobial is not Enough” Revisited—From Antimicrobial Polymers to Microstructured Dual‐Functional Surfaces, Self‐Regenerating Polymer Surfaces, and Polymer Materials with Switchable Bioactiv7
Synthesis and Application of Polyvinyl Butyral Resins: A Review7
Nitric Oxide‐Releasing Macromolecular Systems in Anticoagulant Therapeutics7
Hybrid Single Crystals of Poly(ε‐caprolactone) Homopolymers and Poly(ε‐caprolactone)‐b‐Poly(ethylene oxide) Block Copolymers7
Masthead: Macromol. Chem. Phys. 3/20247
Investigation of Reactive Compatibilization on Degradable Poly(lactic acid)/Poly(butylene adipate‐co‐terephthalate) Blends with Lysine Diisocyanate7
Local Chain Dynamics in Polyelectrolyte Multilayers of Chitosan and Spin‐Labeled Poly(ethylene‐alt‐maleic acid)7
Evolution of the Deformation‐ and Flow‐Induced Crystallization and Characterization of the Microstructure of a Single Spherulite, Lamella, and Chain of Isotactic Polypropylene7
Issue Information: Macromol. Chem. Phys. 3/20257
Polydioxanone Derivative Bearing Methoxy Groups toward Bio‐Functional Degradable Polymers Exhibiting Hydration‐Driven Biocompatibility7
Passively Driven Smart Windows Based on Oriented HPC/PAMPS Composite Hydrogel7
7
A Hierarchical Porous Aerogel Prepared from Conjugated Polymer for Rapid and Effective Removal of Organic Micro‐Pollutants from Water7
Multifunctional Poly(2‐ethyl‐2‐oxazoline)/Lithium‐Silver Oxide Nanocomposites: Insights into Structural, Mechanical, Thermal, Electrical, and Antibacterial Properties7
Stable Alkyne‐Bridged Conjugated Polymer Nanoparticles With a High NIR‐II Photothermal Conversion Efficiency of 71% for Effective Photothermal Tumor Therapy7
Electrochemical Exfoliation of Graphene and Formation of its Copolyamide 6/66 Nanocomposites by Wet Phase Inversion and Injection Molding7
Interfacial Crystallization of Poly(L‐Lactic Acid) Induced by Carbon Nanotubes in Single Fiber Composites7
The Effect of Chain Topology on the Crystallization and Polymorphism of PVDF: Linear versus Star Molecules7
Front Cover: Macromol. Chem. Phys. 23/20247
3D‐Printing of Poly(arylene ether sulfone)s: Functional High‐Performance Polymers for Vat Photopolymerization7
Active Learning as a Tool for Optimizing “Plug‐n‐Play” Electrochemical Atom Transfer Radical Polymerization6
Model of Crystallization Behavior of Isotactic Polypropylene: The Role of Defects6
Effect of the Functional Groups of Polymers on Their Adsorption Behavior on Graphene Oxide Nanosheets6
Polyacrylamide Grafted Activated Carbon by Surface‐Initiated AGET ATRP for the Flocculation of MFT6
Synthesis and Properties Study of Ploy(Difluoroaminomethyl‐3‐Methyloxetane)‐Based Triblock Copolymers for Energetic Binder6
From Glow to Growth: Chemiluminescence Induced Cationic Polymerization Using Ferrocenium Salt6
Toward Model Amphiphilic Polymer Co‐Networks: Linking Architecture to Structure and Properties6
Reversible Demountable Coating Films Composed of Trifunctional Liquid Anthracene Compounds and Evaluation of Their Adhesive Properties6
Masthead: Macromol. Chem. Phys. 6/20246
Photoiniferter‐RAFT Polymerization of Itaconic Acid6
Eighty Years of Macromolecular Chemistry and Physics6
Porous β‐Cyclodextrin/Silver Microspheres for Efficient Removal of Organic Contaminants in Wastewater via Continuous‐Flow Reactors6
A Short Review on Organohydrogels: Constructions and Applications6
Front Cover: Macromol. Chem. Phys. 3/20256
Issue Information: Macromol. Chem. Phys. 8/20266
Polyurethane Foams in Medical Devices: A Brief Review6
Marangoni‐Driven Patterning in Polymer Thin Film Supported on Shrinking Substrate for Resolution Enhancement6
6
6
A SNAr‐Active External Initiator that Enables Heterobifunctional Clickable Polythiophenes6
Strong Hydrophobic and Ultraviolet Reflective Film from Fluorinated Polyisoprene with Microphase Separation via Thiol–Epoxy Click Chemistry6
Dynamic Urea Bond‐Mediated Polymerization for Solvent‐Free Low‐Ð Linear Polyurethanes of Controlled Molar Mass: Hypothesis of Diffusion Control6
Immobilization of Catalase on Polyhedral Oligomeric Silsesquioxane (POSS)‐Based Matrix and Its Catalytical Activity in 3,3′,5,5′‐Tetramethylbenzidine (TMB) Oxidation6
Zwitterionic Polymer Brushes and Core‐Shell Particles Based thereon for Control of Biofouling6
Epoxy‐Modified Pyrophyllite as a Multifunctional Chain Extender for Poly(latic acid)6
Biphenylamine Adjusted Bis(arylimino)Acenaphthene‐Nickel Catalysts for Ultra‐High‐Molecular‐Weight and Highly Branched Polyethylenes6
Syndiotactic Poly(Substituted Methylene)s with Alkyloxycarbonyl Side Chains: Effects of Side Chain Chirality on the Main Chain Helix and Crystallinity6
Multifunctional Benzoxazine Resins Containing Biphenyl Structures: Synthesis, Characterization and Properties6
Interpenetrating Network Strategy for Highly Effective Toughening of Epoxy Resin Using Cellulose Microgels6
6
Front Cover: Macromol. Chem. Phys. 22/20246
6
Red‐shifted and Dramatically Enhanced Fluorescence Emissions from Sodium Alginate‐Polyethyleneimine Polyelectrolyte Complexes6
Multimodal Polymeric Crosslinker Capable of Dual Crosslinking for Enhanced Cohesion, Adhesion, and Debonding of Waterborne Acrylic Adhesives6
Anionic Hybrid Copolymerization of Cyclic and Vinyl Monomers without Transesterification6
Amphiphilic Surface‐Active Methacrylic Urethane Additives for the Design of Photopolymerized Coatings with Great Potential for Marine Fouling‐Release Applications6
Lysosome‐Targeting Polysiloxane Fluorescent Probe for Continuous Detection of Fe3+, Cu2+, and H2O26
Dynamics of High Molecular Weight Cylindrical and Lamellar Block Copolymers with X‐ray Photon Correlation Spectroscopy6
Solid‐State NMR Exploration of Factors for Enhancement of Hole Mobility by Introduction of Poly(styrene) Into Poly(3‐hexylthiophene)6
Functionalized Polyisobutylene and Polyisobutylene‐Based Block Copolymers by Mechanistic Transformation from Cationic to Radical Process6
Progress in Glucose‐Sensitive Hydrogels for Biomedical Applications6
Facile Modification of Propiolated Castor Oil via Nucleophilic Thiol‐Yne Click Reactions6
Extraction and Purification of a Phycocolloid from Chaetomorpha aerea6
High Electrical and Mechanical Properties Obtained in a Polyimide‐Based Nanocomposite with Sandwich Structure via Multidimensional Design6
Polymer‐Protected Gold Nanoparticles for Photothermal Treatment of Ehrlich Adenocarcinoma: In Vitro and In Vivo Studies6
Synthesis ofN‐Substituted Maleimides and Poly(styrene‐coN‐maleimide) Copolymers and Their Potential Application as Photoresists6
The Effect of Intermolecular Interactions between Aromatic Ring‐Containing Insulators and Semiconductors in Pentacene Thin‐Film Transistors6
Masthead: Macromol. Chem. Phys. 22/20226
Dynamically Cross‐Linked Polyolefin Elastomers with Disulfide Bonds Fabricated by Free‐Radical Reactive Processing6
Nanophase Segregation Drives Heterogeneous Dynamics in Amphiphilic PLMA‐b‐POEGMA Block‐Copolymers with Densely Grafted Architecture6
6
Effect of Lignin‐Derived Graphene on Glass Transition Temperature of Polymethacrylates6
Properties of Cross‐Linked Poly‐ l ‐lysine Hydrogels across the Random Coil–Helix Transition6
Metal‐Free Synthesis of π‐Conjugated Polyisoxazoles by 1,3‐Dipolar Cycloaddition of Divanillin‐Based Nitrile N‐Oxides and Dialkynes6
Environmentally Degradable Polymers Incorporating Stimuli‐Triggered Cleavable Linkages toward Industrial Materials6
Barrier Properties of Biodegradable Aliphatic–Aromatic Copolyesters (PBXT Series)5
Self‐Aligned Polymer Film Patterning on Microstructured Silicon Surfaces5
0.059928178787231