Plasma Science & Technology

Papers
(The TQCC of Plasma Science & Technology is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Cross-focusing of two chirped Gaussian laser beams and THz wave generation in plasmas of multi-ion species under a weakly relativistic and ponderomotive regime31
Valley-dependent topological edge states in plasma photonic crystals28
Chemical and physical studies of metallic alloy-based old Indian coins with LIBS coupled with multivariate analysis24
Gyro-Landau-fluid simulations of impurity effects on ion temperature gradient driven turbulence transport19
Experimental study of core MHD behavior and a novel algorithm for rational surface detection based on profile reflectometry in EAST19
Effect of high-energy Ne ions irradiation on mechanical properties difference between Zr63.5Cu23Al9Fe4.5 metallic glass and crystalline W19
VUV imaging of type-I ELM filamentary structures and their temporal characteristics on EAST18
Poloidal magnetic field reconstruction by laser-driven ion-beam trace probe in spherical tokamak18
Investigation of discharge regimes of silicon needle with short air gap18
Multi-layer structure formation of relativistic electron beams in plasmas17
On the electron sheath theory and its applications in plasma–surface interactions17
Invariant manifold growth formula in cylindrical coordinates and its application for magnetically confined fusion17
Machine learning application to predict the electron temperature on the J-TEXT tokamak17
Design and experimental study of a field-reversed configuration plasma thruster prototype16
First spectroscopic study of HFRC plasma15
The low temperature growth of stable p-type ZnO films in HiPIMS15
Machine learning combined with Langmuir probe measurements for diagnosis of dusty plasma of a positive column14
Magnetohydrodynamic effect of internal transport barrier on EAST tokamak14
An efficient process for decomposing perfluorinated compounds by reactive species during microwave discharge in liquid14
Conceptual design and heat transfer performance of a flat-tile water-cooled divertor target14
Numerical studies of the influence of seeding locations on D-SOL plasmas in EAST14
Tomography of emissivity for Doppler coherence imaging spectroscopy diagnostic in HL-2A14
Space-resolved vacuum-ultraviolet spectroscopy for measuring impurity emission from divertor region of EAST tokamak14
Experimental observation of the transport induced by ion Bernstein waves near the separatrix of magnetic nulls13
Erosion of boron carbide coating due to high pulse number transient heat loads13
Abnormal transition of the electron energy distribution with excitation of the second harmonic in low-pressure radio-frequency capacitively coupled plasmas13
Line identification of extreme ultraviolet (EUV) spectra from low-Z impurity ions in EAST tokamak plasmas12
A data selection method for matrix effects and uncertainty reduction for laser-induced breakdown spectroscopy12
Detection and quantification of Pb and Cr in oysters using laser-induced breakdown spectroscopy12
Inverse synthetic aperture radar range profile compensation of plasma-sheath-enveloped reentry object12
Physics design of electron dumps for the beamline of CFEDR advance neutral beam equipment (CANBE)12
Investigation into wideband electromagnetic stealth device based on plasma array and radar-absorbing materials12
Effect of shock wave formation on propellant ignition in capillary discharge12
A homogeneous atmospheric pressure air plasma in a 10 mm gap based on a three-electrode configuration11
Quasi-optical characterization and preliminary experimental results of electron cyclotron emission imaging on HL-3 tokamak11
Comparison of transport coefficients before and after density pump-out induced by resonant magnetic perturbation using a BOUT++ six-field model on the EAST tokamak11
Experimental study of density gradient-driven micro-instabilities and the confinement degradation during H-mode in EAST11
Magnetohydrodynamic simulation study of impurity radiation-excited and driven tearing mode11
Numerical analysis for the free-boundary current reversal equilibrium in the AC plasma current operation in a tokamak11
Simulation of charge-exchange induced NBI losses on EAST11
Efficient direction-independent fog harvesting using a corona discharge device with a multi-electrode structure10
Application of integrated simulation environment SIEMNED to the analysis of the MEPHIST-0 tokamak operation10
Separation of micron-sized dust particles in low pressure air using a dusty plasma ratchet10
Effects of plasma radiation on the nonlinear evolution of neo-classical tearing modes in tokamak plasmas10
Effect of megapore particles packing on dielectric barrier discharge, O3 generation and benzene degradation10
Energy and flux measurements of laser-induced silver plasma ions by using Faraday cup10
Investigation of phase modulation and propagation-route effect from unmatched large-scale structures for Doppler reflectometry measurement through 2D full-wave modeling10
Mode structure symmetry breaking of reversed shear Alfvén eigenmodes and its impact on the generation of parallel velocity asymmetries in energetic particle distribution10
Ultra-simplified design and quantitative analysis for the optical system of compact laser-induced breakdown spectroscopy10
Comparison of methods for turbulence Doppler frequency shift calculation in Doppler reflectometer10
Presheath formation and area design limit satellite-based Langmuir probes10
Controllable and tunable plasma photonic crystals through a combination of photonic crystal and dielectric barrier discharge patterns10
Design of the electron cyclotron emission diagnostic on EXL-50 spherical torus9
Enhanced antibacterial activity of cotton via silver nanocapsules deposited by atmospheric pressure plasma jet9
Realizing high efficiency and large-area sterilization by a rotating plasma jet device9
Sterilization mechanism of helium/helium–oxygen atmospheric-pressure pulsed dielectric barrier discharge on membrane surface9
The propagation dynamics and stability of an intense laser beam in a radial power-law plasma channel9
Investigation of a facile plasma-driven method for in situ cleaning of metal-based contamination9
Investigation of the compact torus plasma motion in the KTX-CTI device based on circuit analyses9
Two-dimensional investigation of characteristic parameters and their gradients for the self-generated electric and magnetic fields of laser-induced zirconium plasma9
Line identification of boron and nitrogen emissions in extreme- and vacuum-ultraviolet wavelength ranges in the impurity powder dropping experiments of the Large Helical Device and its application to 9
Anomalous transport driven by ion temperature gradient instability in an anisotropic deuterium-tritium plasma9
Experimental confirmation of the linear relation between plasma current and external vertical magnetic field in EXL-50 spherical torus energetic electron plasmas9
Research on the energy consumption mechanism and characteristics of the gallium indium tin liquid metal arcing process9
The far-field plasma characteristics of LHT40 low-power Hall thruster for commercial aerospace applications9
Referee List9
Surface modification of fabrics using dielectric barrier discharge plasma for improved antifouling performance9
Investigation of cyclohexane catalytic degradation driven by N atoms from N2 discharges9
Ion-acoustic waves with non-planar wavefronts9
Impacts of laser pulse width and target thickness on laser micro-propulsion performance9
Observation of the poloidally asymmetrical density perturbation of sawtooth collapse on J-TEXT9
Minimum inhibitory but maximum non-hemolytic concentration of plasma-treated catheters coated with L. tridentata and O. vulgare extracts9
Modeling study on different discharge characteristics in pulsed discharges with and without barriers on electrodes9
Viscous effects on plasmoid formation from nonlinear resistive tearing growth in a Harris sheet9
Hydrophobicity changes of polluted silicone rubber introduced by spatial and dose distribution of plasma jet9
Design of the stripping unit and the electromagnetic analysis unit for the E//B NPA on HL-2A/2M tokamak8
Enhanced removal of ultrafine particles from kerosene combustion using a dielectric barrier discharge reactor packed with porous alumina balls8
Influence of cyclic ignition and steady-state operation on a 1–2 A barium tungsten hollow cathode8
Micro-impulse and plasma plume produced by irradiating aluminum target with nanosecond laser pulses in double-pulse scheme8
Numerical study of runaway current impact on sawtooth oscillations in tokamaks8
Two-point model analysis of SOL plasma in EAST8
The effects of inner electrode shape on the performance of dielectric barrier discharge reactor for oxidative removal of NO and SO28
Surface modification of silicone rubber by CF4 radio frequency capacitively coupled plasma for improvement of flashover8
Wet flashover voltage improvement of the ceramics with dielectric barrier discharge8
Recent progress on the J-TEXT three-wave polarimeter-interferometer8
Analysis of the microstructure and elemental occurrence state of residual ash-PM following DPF regeneration by injecting oxygen into non-thermal plasma8
Analysis and verification of electrodynamic force, thermal stress and current sharing for CRAFT converter structure design8
3D electromagnetic simulation of the coupling characteristics and double-stub Ferrite tuners impedance matching for EAST ICRH four-strap antenna8
Effect of desorbed gas on microwave breakdown on vacuum side of dielectric window8
Numerical and experimental study on mitigation of electromagnetic pulses at XG-III laser facility8
The influence of RF-current to tearing mode in multi-harmonic theory7
Influence of acceleration stage electrode voltage on the performance of double-stage Hall effect thruster with adjustable zero magnetic point7
Development of a real-time magnetic island reconstruction system based on PCIe platform for HL-2A tokamak7
Simulations of energetic alpha particle loss in the presence of toroidal field ripple in the CFETR tokamak7
Analysis of non-ionized substance losses in experiments on plasma mass separation7
Fault detection and health monitoring of high-power thyristor converter based on long short-term memory in nuclear fusion7
Regulation of the pantograph-catenary arc by an alternating transverse magnetic field7
Experimental study of single-translated field-reversed configuration in KMAX7
Effect of single-legged coil on 3D plasma boundary corrugation in EAST7
A fast convergence fourth-order Vlasov model for Hall thruster ionization oscillation analyses7
Effect of gas flow on the nanoparticles transport in dusty acetylene plasmas7
Effect of plasma treatment on the seed germination and seedling growth of radish (Raphanus sativus)7
Modeling tungsten response under helium plasma irradiation: a review7
Surface properties of Al-doped ZnO thin film before and after CF4/Ar plasma etching7
Detection of Al, Mg, Ca, and Zn in copper slag by LIBS combined with calibration curve and PLSR methods7
Investigation of short-channel design on performance optimization effect of Hall thruster with large height–radius ratio7
Roll-to-roll fabrication of large-scale polyorgansiloxane thin film with high flexibility and ultra-efficient atomic oxygen resistance7
Study on divertor heat flux under n = 3 and n = 4 resonant magnetic perturbations using infrared thermography diagnostic in EAST7
Composite wave-absorbing structure combining thin plasma and metasurface7
Stress wave analysis of high-voltage pulse discharge rock fragmentation based on plasma channel impedance model7
Fault diagnosis algorithm for 3-phase passive rectifiers based on frequency-domain analysis for acceleration grid power supply in CFETR NBI system7
Spatial and temporal evolution of electromagnetic pulses from solid target irradiated with multi-hundred-terawatt laser pulse inside target chamber7
Investigation of radial heat conduction with 1D self-consistent model in helicon plasmas7
Feasibility study on the suitability of dielectric barrier discharge plasma treatment of desert sand for concrete production purposes7
Interaction of an unwetted liquid Li-based capillary porous system with high-density plasma7
Cleaning of nitrogen-containing carbon contamination by atmospheric pressure plasma jet7
Experimental investigation on de-icing by an array of impact rod-type plasma synthetic jets7
The effect of anode axial position on the performance of a miniaturized cylindrical Hall thruster with a cusp-type magnetic field7
Three-dimensional numerical simulation of heating and melting behaviors of cerium oxide powders in radio frequency thermal plasma7
Discharge and mass transfer characteristics of atmospheric pressure gas-solid two-phase gliding arc6
Reconstruction of poloidal magnetic field profiles in field-reversed configurations with machine learning in laser-driven ion-beam trace probe6
Investigation of the J-TEXT plasma events by k-means clustering algorithm6
Influence of the position relationship between the cathode and magnetic separatrix on the discharge process of a Hall thruster6
Laser-assisted ablation and plasma formation of titanium explored by LIBS, QCM, optical microscopy and SEM analyses along with mechanical modifications under different pressures of Ar and Ne6
Effect of power supply parameters on discharge characteristics and sterilization efficiency of magnetically driven rotating gliding arc6
Study of the spectrum effect on the threshold of resonant magnetic perturbation penetration on J-TEXT6
Recent results of fusion triple product on EAST tokamak6
Simulation of mode transitions in capacitively coupled Ar/O2 plasmas6
Characterization of dust collected in EAST after 2019 campaign6
Experimental study on the parameter optimization and application of a packed-bed dielectric barrier discharge reactor in diesel particulate filter regeneration6
Suppression and mitigation of inter-ELM high-frequency Alfvén-like mode by resonant magnetic perturbation in EAST6
Comparison of the effect of different external electrodes on discharge plasma-assisted diffusion flame stabilization6
Performance prediction of upgrading lithium beam emission spectroscopy to sodium beam emission spectroscopy diagnostic on EAST6
Magnetic field induction and magnetic force distribution profiles in plasma focus discharge device6
Formation mechanism of platinum nanoparticles prepared by atmospheric pressure plasma jet6
Instabilities of ideal magnetohydrodynamics mode and neoclassical tearing mode stabilization by electron cyclotron current drive for EHL-2 spherical torus6
Investigation of an electrode-driven hydrogen plasma method for in situ cleaning of tin-based contamination6
A review on plasma-based CO2 utilization: process considerations in the development of sustainable chemical production6
Efficient combination and enhancement of high-power mid-infrared pulses in plasmas6
Towards advanced divertor configurations on the J-TEXT tokamak6
Investigation of optimum discharge characteristics and chemical activity of AC driven air plasma jet and its anticancer effect6
Oxidation of ciprofloxacin by the synergistic effect of DBD plasma and persulfate: reactive species and influencing factors analysis6
Progress in the creation of long-lived atmospheric luminous formations in a pulsed electric discharge with an electrolytic electrode6
Publisher's Note: Correction of article number for Wang et al 2024 Plasma Sci. Technol. 26 0940076
Free-boundary plasma equilibria with toroidal plasma flows6
Plasma treatment for enhancement of the sorption capacity of carbon fabric6
Local wavelength evolution and Landau damping of electrostatic plasma wave driven by an ultra-relativistic electron beam in dense inhomogeneous plasma6
Influence of residual gas on electric strength of planar vacuum gap with field electron emission on cathode6
Plasma synthesis of various polymorphs of tungsten trioxide nanoparticles using gliding electric discharge in humid air: characterization and photocatalytic properties6
Simulation of ion cyclotron wave heating in the EXL-50U spherical tokamak based on dispersion relations6
Enhancing silicon spectral emission in LIBS using Tesla coil discharge6
DC active power filter based on model predictive control for DC bus overvoltage suppression of accelerator grid power supply6
Machine learning of turbulent transport in fusion plasmas with neural network6
Theoretical simulation study of laser-induced plasma bombardment on bacteria6
A brief review: effects of resonant magnetic perturbation on classical and neoclassical tearing modes in tokamaks6
Thermophysical properties of pure gases and mixtures at temperatures of 300–30 000 K and atmospheric pressure: thermodynamic properties and solution of equilibrium compositions6
Airfoil friction drag reduction based on grid-type and super-dense array plasma actuators6
W fuzz layers: very high resistance to sputtering under fusion-relevant He + irradiations6
Incorporating empirical knowledge into data-driven variable selection for quantitative analysis of coal ash content by laser-induced breakdown spectroscopy6
Investigation of stimulated growth effect using pulsed cold atmospheric plasma treatment on Ganoderma lucidum5
Physical design of a new set of high poloidal mode number coils in the EAST tokamak5
Various concentric-ring patterns formed in a water-anode glow discharge operated at atmospheric pressure5
Impurity modes in two-dimensional strongly coupled complex plasma crystals5
Research on the method of dual-frequency microwave diagnosis of plasma for solving phase integer ambiguity5
Design and experimental results of a 28 GHz, 400 kW gyrotron for electron cyclotron resonance heating5
Dynamic performance of linear electromagnetic actuators in a stray magnetic field: theoretical analysis and experimental verification5
Design of Thomson scattering diagnostic system on linear magnetized plasma device5
Microwave-assisted pre-ionization experiments on GLAST-III5
Influence of bias voltage and oxygen addition on the discharge aspects of a diffuse argon plume in an atmospheric pressure plasma jet5
Numerical simulation of nanosecond laser ablation and plasma characteristics considering a real gas equation of state5
Comparison of sample temperature effect on femtosecond and nanosecond laser-induced breakdown spectroscopy5
Numerical simulation and experimental research on an inductively coupled RF plasma cathode5
Effects of rod radius and voltage on streamer discharge in a short air gap5
Simulation study on electron heating characteristics in magnetic enhancement capacitively coupled plasmas with a longitudinal magnetic field5
Influence of 3D helical magnetic perturbations on runaway electron generation in J-TEXT tokamak5
Studies on the motion and radiation of interior plasmas in gas-filled hohlraums with different laser entrance hole sizes5
Observations of mode frequency increase and the appearance of ITB during the m/n = 1/1 kink mode in EAST high electron temperature long pulse operation5
High-resolution x-ray monochromatic imaging for laser plasma diagnostics based on toroidal crystal5
Plasma edge density fluctuation measurements via lithium beam emission spectroscopy on EAST5
Frequency multiplication with toroidal mode number of kink/fishbone modes on a static HL-2A-like tokamak5
A dual-route optical emission spectroscopy diagnostic with wide spectral range and high wavelength resolution on HL-2A tokamak5
Design and fabrication of a full elastic sub-micron-Newton scale thrust measurement system for plasma micro thrusters5
Method to improve the classification accuracy by in situ laser cleaning of painted metal scraps during laser-induced breakdown spectroscopy based sorting5
Design and platform testing of the compact torus central fueling device for the EAST tokamak5
An analysis and preliminary experiment of the discharge characteristics of RF ion source with electromagnetic shielding5
Development of an atmospheric fluorocarbon plasma jet generated by pulse modulated microwave discharge5
A smoothed particle hydrodynamics and finite element method hybrid magnetohydrodynamic code SPMHD5
Particle-in-cell simulations of electron beam-plasma discharge in a narrow gap with varying transverse boundary conditions5
Special issue on the 70th anniversary of HUST5
Evolution of ionization waves in a multi-pulsed plasma jet: the role of memory charges5
Effect of lens-to-sample distance on spatial uniformity and emission spectrum of flat-top laser-induced plasma5
Dynamics of plasma bullets by nanosecond pulsed micro-hollow cathode discharge within air5
Thrust estimate method of an on-orbit Hall thruster using Hall drift current5
Application of local Monte Carlo method in neutronics calculation of EAST radial neutron camera5
Central-cell injection of compact toroid in KMAX5
Atmospheric pressure pulsed modulated arc discharge plasma4
On the stability of small-scale ballooning modes in axisymmetric mirror traps4
Effect of dielectric material on the uniformity of nanosecond pulsed dielectric barrier discharge4
Rapid growth of nanostructure on tungsten thin film by exposure to helium plasma4
Experimental and numerical study on double wedge shock/shock interaction controlled by a single-pulse plasma synthetic jet4
Ozone generation enhanced by silica catalyst in packed-bed DBD reactor4
A plasma equilibrium model for rapid estimation of SF-MPDT performance4
Effect of coil and chamber structure on plasma radial uniformity in radio frequency inductively coupled plasma4
Development and benchmark simulations of a hybrid fluid particle-in-cell code SHYPIC4
Stabilization of ion-temperature-gradient mode by trapped fast ions4
A new stage of the Asian laser-induced breakdown spectroscopy community4
Turbulent boundary layer control with DBD plasma actuators4
Numerical study on the loss of fast ions produced by minority ion cyclotron resonance heating in EAST4
Preliminary compact torus injection experiments on the Keda Torus eXperiment reversed field pinch4
Study of DC-biased microwave discharge by changing anode structure in a 10-cm diameter ion thruster4
Estimating the grain size of microgranular material using laser-induced breakdown spectroscopy combined with machine learning algorithms4
Proton acceleration from picosecond-laser interaction with a hydrocarbon target4
Characteristics of radio-frequency magnetron sputtering with Ag target operated near the electron series resonance oscillation4
Study on the characteristics of non-Maxwellian magnetized sheath in Hall thruster acceleration region4
Effects of the electric field at the edge of a substrate to deposit a Ø100 mm uniform diamond film in a 2.45 GHz MPCVD system4
Simulation on the transition of electrostatic instabilities in EAST steady-state scenario4
Transmission characteristics of terahertz Bessel vortex beams through a multi-layered anisotropic magnetized plasma slab4
Effect of rotating gliding discharges on the lean blow-off limit of biogas flames4
Interaction between the core and the edge for ion cyclotron resonance heating based on artificial absorption plasma model4
Microchannel cooling technique for dissipating high heat flux on W/Cu flat-type mock-up for EAST divertor4
Performance investigation of a low-power Hall thruster fed on iodine propellant4
An application of the shortest path algorithm for the identification of weak MHD mode4
Influence of Ti3C2Tx(MXene) on the generation of dielectric barrier discharge in air4
Investigation of self-generated magnetic field and dynamics of a pulsed plasma flow4
Plasma-assisted ammonia synthesis in a packed-bed dielectric barrier discharge reactor: roles of dielectric constant and thermal conductivity of packing materials4
Plasma density enhancement in radio-frequency hollow electrode discharge4
First results of turbulence investigation on Globus-M2 using radial correlation Doppler reflectometry4
Ion heat transport in electron cyclotron resonance heated L-mode plasma on the T-10 tokamak4
Bulk moduli of two-dimensional Yukawa solids and liquids obtained from periodic compressions4
Reconstructions of velocity distributions from fast-ion D-alpha (FIDA) measurements on EAST4
Gas breakdown in radio-frequency field within MHz range: a review of the state of the art4
Numerical simulation and performance analysis of the radiofrequency inductive cathode4
Study on plasma expansion model of primary discharge on spacecraft solar array4
Feasibility of applying the lower cut-off frequency for the density radial coverage extension in EAST reflectometry measurement4
Investigation of electron cyclotron wave absorption and current drive in CFETR hybrid scenario plasmas4
Numerical study of atmospheric-pressure argon plasma jet propagating into ambient nitrogen4
Equilibrium reconstruction method for self-organized plasmas on reversed field pinches with polarimeter-interferometer4
The mechanism study of low-pressure air plasma cleaning on large-aperture optical surface unraveled by experiment and reactive molecular dynamics simulation4
Pulsed gas–liquid discharge plasma catalytic degradation of bisphenol A over graphene/CdS: process parameters optimization and O3 activation mechanism analysis4
Investigation into the performance effect on carbon-carbon composite grid of 10 cm ion thruster with different configurations4
Development of the HCN heterodyne collective scattering system on J-TEXT4
Dynamic development model for long gap discharge streamer-leader system based on fractal theory4
Development of the pellet injection system on the J-TEXT tokamak4
Landau damping of twisted waves in Cairns distribution with anisotropic temperature4
Effects of power on ion behaviors in radio-frequency magnetron sputtering of indium tin oxide (ITO)4
Numerical analysis on the effect of process parameters on deposition geometry in wire arc additive manufacturing4
Neutronic analysis of Indian helium-cooled solid breeder tritium breeding module for testing in ITER4
Modulation of the plasma uniformity by coil and dielectric window structures in an inductively coupled plasma4
Characteristics of a kHz helium atmospheric pressure plasma jet interacting with two kinds of targets4
A low-jitter self-triggered spark-discharge pre-ionization switch: primary research on its breakdown characteristics and working mechanisms4
0.09342885017395