Plasma Science & Technology

Papers
(The median citation count of Plasma Science & Technology is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)
ArticleCitations
Study on nanoparticle coagulation and charging dynamics in pulse-modulated radio-frequency acetylene discharges24
Design and experimental study of a field-reversed configuration plasma thruster prototype24
Gyro-Landau-fluid simulations of impurity effects on ion temperature gradient driven turbulence transport21
VUV imaging of type-I ELM filamentary structures and their temporal characteristics on EAST20
Poloidal magnetic field reconstruction by laser-driven ion-beam trace probe in spherical tokamak20
First spectroscopic study of HFRC plasma19
Abnormal transition of the electron energy distribution with excitation of the second harmonic in low-pressure radio-frequency capacitively coupled plasmas19
Magnetohydrodynamic effect of internal transport barrier on EAST tokamak19
Space-resolved vacuum-ultraviolet spectroscopy for measuring impurity emission from divertor region of EAST tokamak18
An efficient process for decomposing perfluorinated compounds by reactive species during microwave discharge in liquid18
Multi-layer structure formation of relativistic electron beams in plasmas17
Invariant manifold growth formula in cylindrical coordinates and its application for magnetically confined fusion17
Experimental observation of the transport induced by ion Bernstein waves near the separatrix of magnetic nulls16
Alpha particle confinement in CFEDR H-mode scenario16
Investigation of discharge regimes of silicon needle with short air gap16
Cross-focusing of two chirped Gaussian laser beams and THz wave generation in plasmas of multi-ion species under a weakly relativistic and ponderomotive regime16
Study on LIBS surface-enhanced detection method for soil metal elements based on graphene oxide adsorption-conversion mechanism15
Chemical and physical studies of metallic alloy-based old Indian coins with LIBS coupled with multivariate analysis14
Plasma-assisted fabrication of PPy-Ni(II) hybrid electrodes for high-performance supercapacitors with enhanced capacitance and voltage window14
Experimental study of core MHD behavior and a novel algorithm for rational surface detection based on profile reflectometry in EAST14
Valley-dependent topological edge states in plasma photonic crystals13
On the electron sheath theory and its applications in plasma–surface interactions13
Physical design of electron dumps for the beamline of CFETR advance neutral beam equipment (CANBE)12
Numerical analysis for the free-boundary current reversal equilibrium in the AC plasma current operation in a tokamak12
The transport and radiation loss of tungsten impurities in core plasma for the CFEDR conventional H-mode scenario12
Experimental study of density gradient-driven micro-instabilities and the confinement degradation during H-mode in EAST12
Detection and quantification of Pb and Cr in oysters using laser-induced breakdown spectroscopy12
Effect of high-energy Ne ions irradiation on mechanical properties difference between Zr63.5Cu23Al9Fe4.5 metallic glass and crystalline W12
Comparison of transport coefficients before and after density pump-out induced by resonant magnetic perturbation using a BOUT++ six-field model on the EAST tokamak12
The influence of pH value on nitrate and nitrite formation in air-plasma-treated aqueous solutions12
Simulation of charge-exchange induced NBI losses on EAST12
Preliminary study on the conceptual design and development of diagnostics for the CFEDR12
Inverse synthetic aperture radar range profile compensation of plasma-sheath-enveloped reentry object12
Quasi-optical characterization and preliminary experimental results of electron cyclotron emission imaging on HL-3 tokamak12
Erosion of boron carbide coating due to high pulse number transient heat loads12
A homogeneous atmospheric pressure air plasma in a 10 mm gap based on a three-electrode configuration12
Magnetohydrodynamic simulation study of impurity radiation-excited and driven tearing mode12
Direct measurement of toroidal eddy current on the EXL-50U tokamak with a hardware-compensated fiber optic current sensor11
Effect of shock wave formation on propellant ignition in capillary discharge11
Separation of micron-sized dust particles in low-pressure air using a dusty plasma ratchet11
Two-dimensional investigation of characteristic parameters and their gradients for the self-generated electric and magnetic fields of laser-induced zirconium plasma11
Laser ablation of biocompatible Ti6Al4V for bio-medical applications11
Investigation into wideband electromagnetic stealth device based on plasma array and radar-absorbing materials11
Enhanced antibacterial activity of cotton via silver nanocapsules deposited by atmospheric pressure plasma jet11
Realizing high efficiency and large-area sterilization by a rotating plasma jet device11
A data selection method for matrix effects and uncertainty reduction for laser-induced breakdown spectroscopy11
Ultra-simplified design and quantitative analysis for the optical system of compact laser-induced breakdown spectroscopy11
Investigation of the compact torus plasma motion in the KTX-CTI device based on circuit analyses11
Modeling study on different discharge characteristics in pulsed discharges with and without barriers on electrodes10
Ion-acoustic waves with non-planar wavefronts10
Comparison of methods for turbulence Doppler frequency shift calculation in Doppler reflectometer10
Design of the electron cyclotron emission diagnostic on EXL-50 spherical torus10
Effects of plasma radiation on the nonlinear evolution of neo-classical tearing modes in tokamak plasmas10
Controllable and tunable plasma photonic crystals through a combination of photonic crystal and dielectric barrier discharge patterns10
Surface modification of fabrics using dielectric barrier discharge plasma for improved antifouling performance10
Referee List10
Investigation of phase modulation and propagation-route effect from unmatched large-scale structures for Doppler reflectometry measurement through 2D full-wave modeling10
Presheath formation and area design limit satellite-based Langmuir probes10
Efficient direction-independent fog harvesting using a corona discharge device with a multi-electrode structure10
Analysis and verification of electrodynamic force, thermal stress and current sharing for CRAFT converter structure design9
3D electromagnetic simulation of the coupling characteristics and double-stub Ferrite tuners impedance matching for EAST ICRH four-strap antenna9
Numerical and experimental study on mitigation of electromagnetic pulses at the XG-III laser facility9
Anomalous transport driven by ion temperature gradient instability in an anisotropic deuterium-tritium plasma9
Application of integrated simulation environment SIEMNED to the analysis of the MEPHIST-0 tokamak operation9
Investigation of cyclohexane catalytic degradation driven by N atoms from N2 discharges9
Experimental confirmation of the linear relation between plasma current and external vertical magnetic field in EXL-50 spherical torus energetic electron plasmas9
Micro-impulse and plasma plume produced by irradiating aluminum target with nanosecond laser pulses in double-pulse scheme9
Design of the stripping unit and the electromagnetic analysis unit for the E//B NPA on HL-2A/2M tokamak9
Recent progress on the J-TEXT three-wave polarimeter-interferometer9
Hydrophobicity changes of polluted silicone rubber introduced by spatial and dose distribution of plasma jet9
Investigation of a facile plasma-driven method for in situ cleaning of metal-based contamination9
Three-dimensional numerical simulation of heating and melting behaviors of cerium oxide powders in radio frequency thermal plasma9
Observation of the poloidally asymmetrical density perturbation of sawtooth collapse on J-TEXT9
Research on the energy consumption mechanism and characteristics of the gallium indium tin liquid metal arcing process9
Sterilization mechanism of helium/helium–oxygen atmospheric-pressure pulsed dielectric barrier discharge on membrane surface9
Numerical study of runaway current impact on sawtooth oscillations in tokamaks9
Mode structure symmetry breaking of reversed shear Alfvén eigenmodes and its impact on the generation of parallel velocity asymmetries in energetic particle distribution9
Impacts of laser pulse width and target thickness on laser micro-propulsion performance9
Experimental investigation on de-icing by an array of impact rod-type plasma synthetic jets8
The effect of anode axial position on the performance of a miniaturized cylindrical Hall thruster with a cusp-type magnetic field8
Effect of desorbed gas on microwave breakdown on vacuum side of dielectric window8
Roll-to-roll fabrication of large-scale polyorgansiloxane thin film with high flexibility and ultra-efficient atomic oxygen resistance8
The influence of RF current on the tearing mode in multi-harmonic theory8
Effect of gas flow on the nanoparticles transport in dusty acetylene plasmas8
Accelerated field solver for PIC/MCC simulations via physics-informed neural networks8
Fault diagnosis algorithm for 3-phase passive rectifiers based on frequency-domain analysis for acceleration grid power supply in CFETR NBI system8
Minimum inhibitory but maximum non-hemolytic concentration of plasma-treated catheters coated with L. tridentata and O. vulgare extracts8
Wet flashover voltage improvement of the ceramics with dielectric barrier discharge8
Cleaning of nitrogen-containing carbon contamination by atmospheric pressure plasma jet8
Simulation analysis of ICRF heating scenarios for CFEDR8
Composite wave-absorbing structure combining thin plasma and metasurface8
The effects of inner electrode shape on the performance of dielectric barrier discharge reactor for oxidative removal of NO and SO28
Gas baffle optimization for CF4 plasma uniformity in inductively coupled plasma etching: numerical simulations8
Fault detection and health monitoring of high-power thyristor converter based on long short-term memory in nuclear fusion8
Interaction of an unwetted liquid Li-based capillary porous system with high-density plasma8
Spatial and temporal evolution of electromagnetic pulses from solid target irradiated with multi-hundred-terawatt laser pulse inside target chamber8
Regulation of the pantograph-catenary arc by an alternating transverse magnetic field8
Influence of cyclic ignition and steady-state operation on a 1–2 A barium tungsten hollow cathode8
Evaluation of the fusion power via beam-target reaction on EAST and CFETR8
Stress wave analysis of high-voltage pulse discharge rock fragmentation based on plasma channel impedance model8
Investigation of radial heat conduction with 1D self-consistent model in helicon plasmas8
Stability analysis of magnetohydrodynamic instabilities for H-mode scenario in CFEDR8
Experimental study of single-translated field-reversed configuration in KMAX8
Study on divertor heat flux under n = 3 and n = 4 resonant magnetic perturbations using infrared thermography diagnostic in EAST8
A review on plasma-based CO2 utilization: process considerations in the development of sustainable chemical production7
Impact of resonance absorption on simulations of laser direct-drive implosions7
Feasibility study on the suitability of dielectric barrier discharge plasma treatment of desert sand for concrete production purposes7
Analysis of non-ionized substance losses in experiments on plasma mass separation7
Incorporating empirical knowledge into data-driven variable selection for quantitative analysis of coal ash content by laser-induced breakdown spectroscopy7
Spatial resolution of discharge plasma spectroscopy measurements in gases7
Modeling tungsten response under helium plasma irradiation: a review7
Airfoil friction drag reduction based on grid-type and super-dense array plasma actuators7
Surface properties of Al-doped ZnO thin film before and after CF4/Ar plasma etching7
Comparison of the effect of different external electrodes on discharge plasma-assisted diffusion flame stabilization7
Publisher's Note: Correction of article number for Wang et al 2024 Plasma Sci. Technol. 26 0940077
Free-boundary plasma equilibria with toroidal plasma flows7
Investigation of short-channel design on performance optimization effect of Hall thruster with large height–radius ratio7
Detection of Al, Mg, Ca, and Zn in copper slag by LIBS combined with calibration curve and PLSR methods7
Influence of acceleration stage electrode voltage on the performance of double-stage Hall effect thruster with adjustable zero magnetic point7
Simulations of energetic alpha particle loss in the presence of toroidal field ripple in the CFETR tokamak7
Performance prediction of upgrading lithium beam emission spectroscopy to sodium beam emission spectroscopy diagnostic on EAST7
Oxidation of ciprofloxacin by the synergistic effect of DBD plasma and persulfate: reactive species and influencing factors analysis7
Investigation of an electrode-driven hydrogen plasma method for in situ cleaning of tin-based contamination6
Simulation of ion cyclotron wave heating in the EXL-50U spherical tokamak based on dispersion relations6
A dual-route optical emission spectroscopy diagnostic with wide spectral range and high wavelength resolution on HL-2A tokamak6
Enhancing silicon spectral emission in LIBS using Tesla coil discharge6
Design of Thomson scattering diagnostic system on linear magnetized plasma device6
Towards advanced divertor configurations on the J-TEXT tokamak6
Reconstruction of poloidal magnetic field profiles in field-reversed configurations with machine learning in laser-driven ion-beam trace probe6
Theoretical simulation study of laser-induced plasma bombardment on bacteria6
Efficient combination and enhancement of high-power mid-infrared pulses in plasmas6
Simulation of mode transitions in capacitively coupled Ar/O2 plasmas6
Discharge and mass transfer characteristics of atmospheric pressure gas-solid two-phase gliding arc6
High- Q edge-state engineering in 1D plasma photonic crystals for advanced sensing devices6
Formation mechanism of platinum nanoparticles prepared by atmospheric pressure plasma jet6
Special issue on the 70th anniversary of HUST6
Effect of power supply parameters on discharge characteristics and sterilization efficiency of magnetically driven rotating gliding arc6
A brief review: effects of resonant magnetic perturbation on classical and neoclassical tearing modes in tokamaks6
Study of the spectrum effect on the threshold of resonant magnetic perturbation penetration on J-TEXT6
Influence of residual gas on electrical strength of planar vacuum gap with field electron emission on the cathode6
Progress in the creation of long-lived atmospheric luminous formations in a pulsed electric discharge with an electrolytic electrode6
Instabilities of ideal magnetohydrodynamics mode and neoclassical tearing mode stabilization by electron cyclotron current drive for EHL-2 spherical torus6
Influence of the position relationship between the cathode and magnetic separatrix on the discharge process of a Hall thruster6
Local wavelength evolution and Landau damping of electrostatic plasma wave driven by an ultra-relativistic electron beam in dense inhomogeneous plasma6
Central-cell injection of compact toroid in KMAX6
Physical design of a new set of high poloidal mode number coils in the EAST tokamak6
DC active power filter based on model predictive control for DC bus overvoltage suppression of accelerator grid power supply6
Plasma synthesis of various polymorphs of tungsten trioxide nanoparticles using gliding electric discharge in humid air: characterization and photocatalytic properties6
Electromagnetic Landau-fluid simulation of turbulent transport in reversed magnetic shear tokamak plasmas with impurity ions6
Investigation of the J-TEXT plasma events by k-means clustering algorithm6
Electroacoustic characteristics of repetitive spark discharge and its interaction with induced flow fields6
Laser-assisted ablation and plasma formation of titanium explored by LIBS, QCM, optical microscopy and SEM analyses along with mechanical modifications under different pressures of Ar and Ne6
Progress of the bolometer diagnostic system on EAST5
Impurity modes in two-dimensional strongly coupled complex plasma crystals5
Analysis of inverse synthetic aperture radar imaging in the presence of time-varying plasma sheath5
Evolution of ionization waves in a multi-pulsed plasma jet: the role of memory charges5
Realization of divertor configuration discharge in J-TEXT tokamak5
Neutronic analysis of Indian helium-cooled solid breeder tritium breeding module for testing in ITER5
Feasibility of applying the lower cut-off frequency for the density radial coverage extension in EAST reflectometry measurement5
An analysis and preliminary experiment of the discharge characteristics of RF ion source with electromagnetic shielding5
Effects of the electric field at the edge of a substrate to deposit a Ø100 mm uniform diamond film in a 2.45 GHz MPCVD system5
Investigation of stimulated growth effect using pulsed cold atmospheric plasma treatment on Ganoderma lucidum5
Experimental study on the discharge characteristics of a DC transferred arc twin torch system5
Numerical simulation and performance analysis of the radiofrequency inductive cathode5
Development of an atmospheric fluorocarbon plasma jet generated by pulse modulated microwave discharge5
Studies on the motion and radiation of interior plasmas in gas-filled hohlraums with different laser entrance hole sizes5
Influence of 3D helical magnetic perturbations on runaway electron generation in J-TEXT tokamak5
Characteristics of radio-frequency magnetron sputtering with Ag target operated near the electron series resonance oscillation5
Plasma edge density fluctuation measurements via lithium beam emission spectroscopy on EAST5
Pulsed gas–liquid discharge plasma catalytic degradation of bisphenol A over graphene/CdS: process parameters optimization and O3 activation mechanism analysis5
Frequency multiplication with toroidal mode number of kink/fishbone modes on a static HL-2A-like tokamak5
Transmission characteristics of terahertz Bessel vortex beams through a multi-layered anisotropic magnetized plasma slab5
Application of local Monte Carlo method in neutronics calculation of EAST radial neutron camera5
Effect of dielectric material on the uniformity of nanosecond pulsed dielectric barrier discharge5
Focused electron beam transport through a long narrow metal tube at elevated pressures in the forevacuum range5
Estimating the grain size of microgranular material using laser-induced breakdown spectroscopy combined with machine learning algorithms5
Design and platform testing of the compact torus central fueling device for the EAST tokamak5
Dynamic performance of linear electromagnetic actuators in a stray magnetic field: theoretical analysis and experimental verification5
Method to improve the classification accuracy by in situ laser cleaning of painted metal scraps during laser-induced breakdown spectroscopy based sorting5
Thrust estimate method of an on-orbit Hall thruster using Hall drift current5
Atmospheric pressure pulsed modulated arc discharge plasma5
Simulation study on electron heating characteristics in magnetic enhancement capacitively coupled plasmas with a longitudinal magnetic field5
A smoothed particle hydrodynamics and finite element method hybrid magnetohydrodynamic code SPMHD5
Effects of rod radius and voltage on streamer discharge in a short air gap5
Preliminary compact torus injection experiments on the Keda Torus eXperiment reversed field pinch5
Various concentric-ring patterns formed in a water-anode glow discharge operated at atmospheric pressure5
Electron density measurement by the three boundary channels of HCOOH laser interferometer on the HL-3 tokamak5
Ion heat transport in electron cyclotron resonance heated L-mode plasma on the T-10 tokamak5
Numerical simulation of the effect of plasma ion viscosity on the heating and compression in dynamic Z -pinch implosions5
Effects of power on ion behaviors in radio-frequency magnetron sputtering of indium tin oxide (ITO)5
Numerical study of atmospheric-pressure argon plasma jet propagating into ambient nitrogen5
Competitive effect between roughness and mask pattern on charging phenomena during plasma etching5
High-resolution x-ray monochromatic imaging for laser plasma diagnostics based on toroidal crystal5
Effect of lens-to-sample distance on spatial uniformity and emission spectrum of flat-top laser-induced plasma5
Integrated physics design of conventional H-mode scenario for China Fusion Engineering Demo Reactor5
Design and experimental results of a 28 GHz, 400 kW gyrotron for electron cyclotron resonance heating5
Conductivity effects during the transition from collisionless to collisional regimes in cylindrical inductively coupled plasmas5
Influence of bias voltage and oxygen addition on the discharge aspects of a diffuse argon plume in an atmospheric pressure plasma jet5
Particle-in-cell simulations of electron beam-plasma discharge in a narrow gap with varying transverse boundary conditions5
Study of the relationship between magnetic field gradient and operating range of flow rate for Hall thrusters5
Observations of mode frequency increase and the appearance of ITB during the m/n = 1/1 kink mode in EAST high electron temperature long pulse operation5
Development of the pellet injection system on the J-TEXT tokamak4
Investigation of the gas bubble dynamics induced by an electric arc in insulation oil4
An application of the shortest path algorithm for the identification of weak MHD mode4
Improvement of atmospheric jet-array plasma uniformity assisted by artificial neural networks4
Luminescent target interactions in ICP discharges: a diagnostic method for plasma current density4
Closed corner divertor with B × ∇B away from the divertor: a promising divertor scenario for tokamak power exhaust4
Investigation of electron cyclotron current drive efficiency on the J-TEXT tokamak4
Stabilization of ion-temperature-gradient mode by trapped fast ions4
The mechanism study of low-pressure air plasma cleaning on large-aperture optical surface unraveled by experiment and reactive molecular dynamics simulation4
Tamping the movement of the laser absorption cutoff position using gold foam hohlraum4
Experimental study on surface arc plasma actuation-based hypersonic boundary layer transition flow control4
Experimental observations of naturally occurring dust using a high-speed vacuum ultraviolet imaging system in EAST4
A GPU-based general numerical framework for plasma simulations in terms of microscopic kinetic equations with full collision terms4
Analysis of the effects of strong stray magnetic fields generated by tokamak device on transformers assembled inelectronic power converters4
Corrigendum to “Experimental observation of the transport induced by ion Bernstein waves near the separatrix of magnetic nulls”4
Numerical investigation of plasma CO2 hydrogenation in a coaxial dual-layer dielectric barrier discharge at atmospheric pressure4
Effect of rotating gliding discharges on the lean blow-off limit of biogas flames4
Bulk moduli of two-dimensional Yukawa solids and liquids obtained from periodic compressions4
Experimental and numerical study on double wedge shock/shock interaction controlled by a single-pulse plasma synthetic jet4
Dynamic development model for long gap discharge streamer-leader system based on fractal theory4
The characteristics of negative corona discharge and radio interference at different altitudes based on coaxial wire–cylinder gap4
Gliding arc discharge in combination with Cu/Cu2O electrocatalysis for ammonia production4
First results of turbulence investigation on Globus-M2 using radial correlation Doppler reflectometry4
Design and implementation of high-field-side divertor target biasing system on J-TEXT4
Droplet velocity and beam divergence modulation in ultrasonic nebulization electric thrusters via dual-electrode optimization4
Investigation of self-generated magnetic field and dynamics of a pulsed plasma flow4
Development of the HCN heterodyne collective scattering system on J-TEXT4
Numerical study of the self-pulsing of DC discharge: from corona to parallel-plate configurations4
Effect of coil and chamber structure on plasma radial uniformity in radio frequency inductively coupled plasma4
Analysis of anomalous transport based on radial fractional diffusion equation4
One-step direct ammonia synthesis by pulse-modulated microwave plasma at atmospheric pressure4
Detecting the meteoroid by measuring the electromagnetic waves excited by the collision between the hypervelocity meteoroid and spacecraft4
Research on degradation mechanism of trichlorobenzene and Hg0 by nonthermal plasma catalysis4
Comparing simulated and experimental spectral line splitting in visible spectroscopy diagnostics in the HL-2A tokamak4
Turbulent boundary layer control with DBD plasma actuators4
Study of DC-biased microwave discharge by changing anode structure in a 10 cm diameter ion thruster4
A new stage of the Asian laser-induced breakdown spectroscopy community4
Study on discharge characteristics of low-temperature sub-atmospheric pressure under steep change rate voltage4
Cathode position effects on microwave discharge cusped field thruster4
Ray-tracing analysis of Doppler backscattering diagnostic for tokamak with reactor technologies4
Simulation on the transition of electrostatic instabilities in EAST steady-state scenario4
Improvement of plasma uniformity and mechanical properties of Cr films deposited on the inner surface of a tube by an auxiliary anode near the tube tail4
Proton acceleration from picosecond-laser interaction with a hydrocarbon target4
Characteristics of the plasma sheath in helium discharge within dielectric tubes4
Analysis of application range of simplified models for field to thermo-field to thermionic emission processes from the cathode4
Numerical analysis on the effect of process parameters on deposition geometry in wire arc additive manufacturing4
Plasma density enhancement in radio-frequency hollow electrode discharge4
Loss of energetic particles due to feedback control of resistive wall mode in HL-34
Equilibrium reconstruction method for self-organized plasmas on reversed field pinches with polarimeter-interferometer4
0.093556880950928