Journal of Iron and Steel Research International

Article	Citations
Interfacial behaviors between ZG13Cr9Mo1VNbN stainless steel and chromite sand	86
Coupling effect of strain rate and temperature on deformation mechanism of reduced activation ferritic/martensitic steel	78
O2 adsorption on Fe3O4 (110) surface and effect of gangue element Al doping: combined study of binding experiment and ab initio molecular dynamics	58
Reoxidation of liquid steel and evolution of inclusions during protective atmosphere electroslag remelting of Ce-containing heat-resistant stainless steel	41
Extended-state-observer-based robust torsional vibration suppression for rolling mill main drive system with input saturation	40
Flow stress and constitutive relations of ship plate steel continuous casting slab with solidification end reduction process	39
Thermal-force control ability under variation of electromagnetic stick structure parameters in RPECT	37
KH560-modified steel slag as a filler for alkyd coatings: enhanced corrosion and mechanical properties	37
Electrochemical behavior of FeCoNiAl0.75Cr1.25 high-entropy alloy in Na2SO4 solution with acidic pH	35
Hot deformation behavior and microstructure evolution in premium GH4738 alloy	34
Forming characteristics of bi-metallic composite shafts by cross-wedge rolling	32
Deformation response of nitrogen-alloyed austenitic stainless steel to hydrogen: investigation via micropillar compression techniques	32
Influence of silica fume on drying shrinkage of alkali-activated carbon steel slag	32
Effect of temperature compensation on properties and interfacial structure evolution of Al/CFRTP ultrasonic welded joints	31
Machine learning study on time–temperature–transformation diagram of carbon and low-alloy steel	31
Reaction mechanism between Al2O3–MgO refractory materials and rare earth high-carbon heavy rail steel	31
High-temperature dissolution behavior of carbides in DC53 steel during quenching process	31
Effects of MgO/Al2O3 and CaO/SiO2 ratios on viscosity of high titanium-bearing blast furnace slag	31
Organic–inorganic composite coatings of PU-SMP@ZrO2 with enhancing corrosion/wear resistances	30
Changes in microstructure and properties of weld heat-affected zone of high-strength low-alloy steel	29
Review on advances in recycling and utilization of titanium-bearing secondary resources	29
Effect of friction on corrosion behaviors of AISI 304 and Cr26Mo1 stainless steels in different solutions	28
Disposal of zinc extraction residues via iron ore sintering process: an innovative resource utilization	28
Melting behavior of isolated metallized pellet in slag–iron bath	28
Contact-reactive brazing mechanism of Al0.3CoCrFeNi high-entropy alloys using a niobium interlayer	28

Microscale observation of hydrogen embrittlement induced by hydrogen traps in L245NS pipeline steel after eight years of hydrogen transportation	27
Effect of trace Nb on corrosion resistance of corrosion layer of high-strength anti-seismic rebar by first-principles and experimental methods	26
Influence of high-content cobalt on hierarchical martensitic microstructures and mechanical properties of stainless maraging steels	26
Gradient age-precipitation behavior induced by gradient nano-grain in Mg–Gd–Ag–Zr alloy	26
Microstructure evolution and its influence on thermoplasticity of wide and thick continuous casting slab with heavy reduction	25
Influence of alternating magnetic field on corrosion and microstructure of 2205 duplex stainless steel welded joints	25
A review of research on central crack in continuous casting strand	25
Effect of distance between heat sources on droplet transfer behavior and weld formation of AH36 during laser and CWW GMAW arc hybrid welding	25
A systematic study of carbon-free oxide-based lining for preventing submerged entry nozzle clogging in continuous casting of rare earth steel	24
Effect of annealing on properties of Al/steel composite plates prepared by surface oxidation treatment before cold roll bonding	23
Strengthening iron ore sintering via mechanical activation of limestone	23
Effect of Cl– and SO42– concentration in bicarbonate solutions on corrosion behavior of Cu	23
Modification of Al2O3 inclusions by cerium in steel: mechanism at atomic scale and kinetic analysis	23
Effect of Mo on acicular ferrite transformation and interphase precipitation of Nb–V–N microalloyed steel during a continuous cooling process	23
Continuous variable cross-section recycled extrusion of Ti–6Al–4V alloy: microstructure evolution, deformation mechanism and refinement mechanism	22
Enhanced hardenability prediction in 20CrMo special steel via XGBoost model	22
Microstructure evolution in large billet during reduction pretreatment based on laboratory experiments	20
High-temperature wear resistance, oxidation resistance and melting loss resistance of plasma cladded Co06–Ni60A composite coating for coppery blast furnace tuyere	20
Comparisons of {100} texture improvement and formability in hot-rolled non-oriented electrical steel by austenite–ferrite phase transformation and shear deformation	20
Grain refinement of 5A06 aluminum alloy welds caused by tungsten inert gas welding arc characteristics under Ar–He alternating gas supply conditions: a coupled method of water-cooled copper plate test	20
Effect of silica on crystallization process of calcium ferrite: thermodynamic and kinetic analysis	20
Permanent lining castable with low bulk density and thermal conductivity: bauxite castable for tundish obtained by adding pearlescent sand	19
Interaction between microporous magnesia castable and 38CrMoAl steel	19
Iron recovery and dephosphorization behaviors from high-phosphorus oolitic hematite by gas-based direct reduction and magnetic separation	19
Application of distributed model predictive control based on neighborhood optimization in gauge–looper integrated system of tandem hot rolling	19
Optimal proportioning of iron ore in sintering process based on improved multi-objective beluga whale optimisation algorithm	19
Super-high bed sintering for iron ores: variation and optimization of bed resistance	18
Processing 304L stainless steel welding wire via electrochemical cold drawing	18
Energy balance of BOF converter during swirl-type oxygen lance blowing process	18
An online BOF terminal temperature control model based on big data learning	18
Enhancement of low-temperature toughness of Fe–Mn–C–Al alloy by rare earth Ce-modified inclusions	18
Strengthening effect of laser shock peening on fatigue performance and life extension of high-throughput laser-directed energy deposition high-strength steel components	18
Effect of rolling schedules on ridging resistance of ultra-thin ferritic stainless steel foil	18
Coarsening behavior of secondary-phase particles in precipitation-hardened alloys: a review	17
Effect of Zr on microstructure and mechanical properties of 304 stainless steel joints brazed by Ag–Cu–Sn–In filler metal	17
Numerical simulation of airflow boundary layer effects on behavior of melt puddle and surface quality of Fe–3.0 wt.%Si non-oriented silicon steel ribbons in planar flow casting	17
Research progress and prospects of interaction mechanisms between rare earth steel and refractories	17
Publisher Correction: Controlling segregation and hardenability of gear steel based on as-cast structure	17
Role of prior austenite grain size in improving creep life of 9Cr steel weldment	16
In situ observation and numerical simulation on deformation and failure process of Al alloy foam with close pore structure under quasi-static compression	16
Synergistic reaction behavior of pyrolysis and reduction of briquette prepared by weakly caking coal and metallurgical dust	16
Effects of prior austenite and primary carbides on mechanical properties of a novel 2.5 GPa grade ultra-high strength steel	16
Development of accumulative roll bonding for metallic composite material preparation and mechanical/functional applications	16
Effects of Mn and Al on property of Fe-based slag-free self-shielded flux-cored welding wire	16
Effect of post rolling stress on phase transformation behavior of microalloyed dual phase steel	16
Evaluation of MgO on hematite swelling dynamics during CO-driven stepwise reduction	16
High-temperature confocal laser scanning microscopy analysis of phase transformation of steels: a review	16
Influence of in situ formed spinel in bonding phase on mechanical properties and air permeability of magnesia–chrome porous purging materials	16
Corrosion wear behavior of selective laser melting TC4 alloy in 3.5 wt.% NaCl solution	16
Effect of pulsed current treatment on microstructure, mechanical properties and corrosion resistance at interface of Incoloy825/20CrNiMo composite plates	15

Understanding effect of ferrite on strength–ductility balance of Fe–Mn–Al–C duplex lightweight steel	15
Optimizing mold electromagnetic stirring parameters for coordinated control of initial shell solidification quality in large round blooms under four-port submerged entry nozzle for feeding	15
Production of ultrafine iron powder by low-temperature hydrogen reduction: properties change with temperature	15
Volume of fluid simulation of single argon bubble dynamics in liquid steel under RH vacuum conditions	15
Enhanced mechanical properties of tantalum alloys via multi-principal elements and compositionally complex carbides	15
Nitrate ions induced transpassive degradation and corrosion mechanism shifts in 304L/C25 stainless steels within simulated spent nuclear fuel reprocessing environments	15
Sintering bed state optimization model constructed by finite element and intelligent algorithms	15
Distribution ratio of sulfur between high alumina slag and carbon-saturated iron	14
A review on enhancing properties of low carbon-containing refractories for advanced iron and steelmaking: from perspective of additives	14
Influence of notch volume on mechanical properties of a novel high-strength and high-toughness steel	14
An experimental study on RH vacuum chamber with a weir	14
Forming process study of laser power bed fusion H13 steel by finite element simulation and experiment	14
Development and application of mold flux for high-speed continuous casting of high-carbon steel billets	14
Agglomeration and bonding mechanism of typical metallurgical solid wastes	14
Recovery of vanadium from vanadium slag by composite additive roasting–acid leaching process	14
Regulation of Ti(C,N) deposition on hot surface of refractory in blast furnace hearth	14
Achieving excellent ductility in a Hf–Nb–Ta–Zr refractory multi-principal-element alloy via electron-beam directional-solidification	14
Effect of different N and Si contents on microstructures and properties of HRB400e steel containing vanadium	14
Microstructure recognition of steels by machine learning based on visual attention mechanism	14
Electric pulse modulation on microstructure and mechanical properties of Cu-bearing 304L stainless steel: an in-situ investigation into synergistic mechanisms	14
Interaction mechanism between BaZrO3/Y2O3 refractory and Ti2Ni alloy melts	13
Microstructure and microtexture evolution characteristics of a powder metallurgy Ni-based superalloy during static recrystallization	13
Modeling of strain-induced γ → α′ phase transformation for 201Cu metastable austenitic stainless steel and its verification in rolling processes	13
Correlation between longitudinal crack occurrence and mold heat transfer in continuous casting based on process data mining	13
Physicochemical principles of hydrogen metallurgy in blast furnace	13
Understanding corrosion behavior of Q420 steel in low temperature environment with freezing–thawing cycling	13
Effect of sulfur segregation/precipitation on microstructure and magnetic properties of Fe–3%Si non-oriented silicon steel ultra-thin ribbons prepared with planar flow casting	13
Effect of flue gas outlet temperature in evaporator on thermal economic performance of organic Rankine cycle system for sinter waste heat recovery	13
Flow field, heat transfer and inclusion behavior in a round bloom mold under effect of a swirling flow submerged entry nozzle	13
Vibrations of tandem cold rolling mill: coupled excitation of rolling force and variable stiffness of fault-free back-up roll bearing	13
Interface behavior of steel–slag–air during tundish filling process: physical modeling and mathematical simulation	13
Effects of varying oxygen content in suction gas during sintering of iron ore	13
Quantitative prediction of prior austenite grain size effects on martensite transformation based on a novel kinetics model in Q&P steel	13
Comparison of corrosion mechanisms of 510L low alloy steel treated by ACS and EPS techniques under various service environments	13
Core–shell structured CoFe-PBA@NiFe-LDH as efficient electrocatalysts for oxygen evolution reaction	12
Chro-austempering treatment of a medium-carbon high-strength bainitic steel	12
On hot deformation behavior and workability characteristic of 42CrMo4 steel based on microstructure and processing map	12
Effect of compact strip processing on segregation behavior and mechanical properties of Q&P steel	12
Effect of Al2O3/SiO2 mass ratio and CaO content on viscosity and structure of slag for pyrometallurgical processing of spent automotive catalysts	12
Proposing a machine learning approach to analyze and predict basic high-temperature properties of iron ore fines and its factors	12
Improvement in mechanical properties of low-carbon carbide-free bainite steel by below-Ms austempering and two-step austempering	12
Phase equilibria of Fe3O4–Cr2O3–CaO system: experimental measurements and thermodynamic calculations	12
Multi-scale analysis of void evolution in large-section plastic mold steel during multi-directional forging	12
Gas release characteristics during carbonization of iron coke hot briquette and influence of heating rate	12
Influence of cooling rate upon weld metal microstructural evolution behaviors of EH36 shipbuilding steel	12
Numerical simulation and experimental investigation of manufacturing route of directional casting super slab	12
Thermodynamic and experimental study of high-temperature roasting of blast furnace gas ash for recovery of metallic zinc and iron	12
Impacts of near-Ms austempering treatment on microstructure evolution and bainitic transformation kinetics of a medium Mn steel	12
Review on regulation of MnS in non-quenched and tempered steel	12
Microstructure evolution and performance improvement of powder metallurgy stainless steel with P addition	12
DLF-YOLOF: an improved YOLOF-based surface defect detection for steel plate	11
Failure analysis of crevice corrosion on 304 stainless steel tube heat exchanger	11
Comparison investigation on microstructure and properties of dissimilar welds by laser alignment welding and laser offset welding between Al–Si coated 1.5 GPa and novel 2 GPa press hardened steels	11
Combined experimental and simulation study on corrosion behavior of B10 copper–nickel alloy welded joint under local turbulence	11
Application of high-temperature confocal scanning laser microscopy to investigate non-metallic inclusions in steel: a review	11
Fluctuation of steel–slag interface in flexible thin slab casting mold	11
Effect of stainless steel fibers on properties of MgO–C refractories	11
Interfacial heat transfer and solidification structure of sub-rapid solidified silicon steel using a novel droplet solidification apparatus	11
Mesoscopic segregation behavior of continuous casting mold fluxes and its effect on lubrication performance	11
Effects of La and Ce treatment on changes in inclusion characteristics of 304 stainless steel during industrial production	11
Numerical simulation of EMS position on flow, solidification and inclusion capture in slab continuous casting	11
Reduction behavior of iron ore powder by high-volatile coal in thermogravimetric–gas chromatographic and kinetic analysis	11
Competitive role of film-like austenite and transition carbides on hydrogen embrittlement resistance and impact toughness in bainite-containing quenched and partitioned steel	11
Use of forestry waste as an alternative raw material for generating metallurgical coke	11
Precipitation behavior of TiN and mechanical properties of ferritic stainless steel under coupling effect of Nb and Ti elements	11
Hydrogen uptake of 100Cr6 bearing steel in gaseous pressurized hydrogen and resulting tensile strength	11
Mitigating corrosion of deposit-covered carbon steel in solution containing sulfate-reducing bacteria by purging nitrogen	11
Effect of V on high-temperature mechanical properties of Al–5Cu–1.5Ni alloy	11
Enhancing mechanical properties and thermal shock resistance of mullite castables by introducing hollow aggregates	11
Effect of Cr2O3 on properties of CaO–SiO2–FetO–MgO system and dissolution behavior of lime	11
Effect of magnesia–alumina spinel solution behavior on microstructure of CAC-bonded castables	11
Y2O3-enhanced MgO refractory crucibles prepared by Salt Lake magnesium resources and its interface reactions with Ni–TiAl superalloy	11
Particle agglomeration behavior in fluidized bed during direct reduction of iron oxide by CO/H2 mixtures	11
Prediction model for austenite grain size in CGHAZ of TiN-containing steel: considering minimum pinning force and austenite coarsening dynamics	11
Unveiling relationship between hierarchical microstructure and a more balanced strength–toughness of PH13-8Mo stainless steel	11
Review on development of reduced activated ferritic/martensitic steel for fusion reactor	11
Analytical model of force and deformation parameters in TRB upward-rolling	11
Combustion mechanism of benzene in iron ore sintering process: experimental and simulation	11
Microstructure, simulation, and wear resistance of grey cast iron with varying microhardness combination processed by bionic laser technology	10
Theoretical and numerical research on effect of tension mechanisms in strip flatness electromagnetic control rolling mills	10

Research progress of iron extraction from red mud and resource utilization of remaining tailings	10
Microstructure and mechanical properties of Ti/Al/Ti clad plates prepared via powder-in-tube method	10
Parametric modeling and CFD simulations of steelmaking converters with different lining structures	10
Application of deep learning in iron ore sintering process: a review	10
Enrichment and reconfiguration of titanium-bearing phase in vortex smelting reduction process of vanadium–titanium magnetite	10
Optimizing strength-ductility synergy in low-Mn lightweight steel via multi-microalloying element design	10
Mechanism of primary Si and Fe-segregation for a hypereutectic 90 wt.% Si–Ti alloy melt in directional solidification via electromagnetism	10
Effect of rare earth content on microstructure and corrosion resistance of hot-dip Zn–5Al alloy coated steel wire for bridge cables	10
A novel Al–Mg–Mn–Zr–Ti alloy with an excellent strength-ductility combination prepared via selective laser melting	10
Effect of deformation on stress corrosion behavior of nuclear grade austenitic stainless steel	10
Propagation form of internal cracks induced by continuous casting soft reduction and control strategy for internal quality	10
Root cause of corrosion failure of tin coating on wire clamp in marine atmosphere	10
A novel approach to enhance decrepitation temperature and reducibility of ultrafine iron ore concentrate pellets	10
Influence of temperature and slag composition on wetting behavior of titanium-containing blast furnace slag and tuyere coke	10
Effective utilization of dolomitic lead–zinc waste rock by replacing dolomite as flux in iron ore sintering process	10
Solidification crack characteristics and sensitivity of peritectic steel	10
Stabilization technology and corrosion mechanism of rust layer on Q370 weathering steel surface	10
Granulation behavior and strengthening strategy of iron ore blends containing specular hematite concentrate	10
Static recrystallization behaviors and mechanisms of 7Mo super-austenitic stainless steel with undissolved sigma precipitates during double-stage hot deformation	10
Influence of calcination temperature on steel slag activity for preparing a gel material	10
Construction of a prediction model for properties of wear-resistant steel using industrial data based on machine learning approach	10
Oxidation consolidation of vanadium–titanium magnetite pellets strengthened by pretreatment of high-pressure grinding rolls	9
Inclusion characteristics and acicular ferrite formation in 1.8%Ni low carbon Al-killed steel with MgO nanoparticles addition	9
Effect mechanism of vanadium on reduction sticking behavior of iron ore pellets in hydrogen-based shaft furnace	9
Process and property optimization of ceramsite preparation by Bayan Obo tailings and blast furnace slag	9
Effect of initial state on microstructure and mechanical properties of medium Mn steel after hot stamping	9
Influence of Ti on ternary eutectic phase structure of Zn–6Al–3Mg coating alloy under rapid cooling condition	9
Effect of resin types on magnetic properties and mechanical strength of FeSiBC amorphous magnetic powder cores	9
Effect of Mg-treatment on transformation of oxide inclusions in X80 pipeline steel	9
Special issue on application of AI in steelmaking and ferrous materials	9
Prediction model of mechanical properties of hot-rolled strip based on improved feature selection method	9
Investigation on bonding interfaces of an SA508 steel billet manufactured by additive forging	9
First-principles study on resistance of γ-Fe grain boundary to liquid lead corrosion: segregation and diffusion behaviors	9
Effect of B2O3 and Na2B4O7 on phosphorus enrichment in Ca2SiO4–Ca3(PO4)2 solid solutions	9
Strip width spread prediction in rough rolling process based on mechanism modeling and optimization	9
Grain boundary phase formation and coercivity improvement of Sm(Fe0.8Co0.2)11−xTiCux (x = 0–0.5) strips with Cu doping	9
Unexpected enhancement of hot corrosion resistance of V-containing high-Mn nickel-saving austenitic heat-resistant steel in molten Na2SO4 at 1173 K	9
Effect of solidification mode on microstructure evolution and properties of magnesium alloy with long-period stacking ordered phase	9
Migration of harmful elements in municipal sludge under high-temperature oxidation conditions	9
Mechanical behavior and microstructural evolution of a modified CSS-42L steel during tempering	9
Low-temperature embrittlement in Fe–Cr–X (X = Ni, Al, Co, etc.) alloys governed by thermodynamics, kinetics and mechanics: a review	9
An analytical model of hot rolling force for a thick plate by combining globally optimal approximation yield criterion and egg-circular velocity field	9
Modeling effect of cooling conditions on solidification process during thermal cycle of rollers in twin-roll strip casting	9
A simple image-based method for online moisture content estimation of iron ore green pellets	9
Austenite-driven TRIP effects: enhancing mechanical properties of 30CrMnSiNi2A steel in laser powder bed fusion	9
Understanding thermal compression and deformation behavior of 3.15 wt.% Si non-oriented electrical steels prepared by sub-rapid solidification	9
Estimation of probable maximum aspect ratio of MnS inclusions in non-quenched and tempered steel after isothermal compression	9
Influence of changing atmosphere under rapid-heating conditions on catalytic combustion of pulverized coal	9
Denaturation behavior of inclusions in industrial pure iron by calcium treatment	9
Microstructure and shear properties evolution of Mn-doped SAC solder joint under isothermal aging	9
Multi-performance evaluation of high-throughput accelerated corrosion test for high-strength low-alloy 921A steel	9
Monitoring and diagnosis of complex production process based on free energy of Gaussian–Bernoulli restricted Boltzmann machine	9
Effect of tempering temperature on microstructure and mechanical properties of flange forgings for high-pressure hydrogen storage vessels	9
MDA-JITL model for on-line mechanical property prediction	9
Effect of h-BN rods on high-temperature properties of alumina–carbon refractory	9
Experimental study and cellular automata simulation of corrosion behavior of ferritic stainless steel in molten aluminum	9
Influence of interfacial segregation of Sn microalloying on internal oxidation of Fe–Mn–Si based alloys	9
Atomic-scale mechanism of effect of co-separation of elements at interface of ferrite and austenite on Cr-depleted zone of duplex stainless steel	8
Optimizing power-saving process for a 120-t ladle furnace	8
Effect of cerium addition on non-metallic inclusions in a high-carbon chromium bearing steel	8
Fundamental research on recovering metals from hot-dip Zn–Al–Mg dross by supergravity separation	8
Primary slag formation behavior during reduction process of SFCA-I and SFCA	8
Improvement on central porosity of large-sized round bloom by solidification end reduction during continuous casting	8
Influence of typical elements and heat treatment parameters on hardenability in steel: a review	8
Effect of electric current on secondary phase dissolution and elements migration behavior of a Ni-based single crystal superalloy	8
Flow and fluctuation of molten steel under permanent magnet flow control-mold in continuous casting process	8
Effect of ultra-thin surface oxide on corrosion behavior of a Cr–Si alloyed press-hardened steel	8
Effect of Si content on microstructure and properties of ultra-thin non-oriented silicon steel ribbons prepared with planar flow casting	8
Oxidation behavior of low-grade vanadiferous titanomagnetite concentrate with high titanium	8
Publisher Correction to: Inclusion characteristics and acicular ferrite formation in 1.8%Ni low carbon Al-killed steel with MgO nanoparticles addition	8
In-situ confocal microscopy study on dissolution kinetics of calcium aluminate inclusions in CaO–Al2O3–SiO2 type steelmaking slags	8
A review of use of metallurgical slag for its carbonation products: processes, crystallization behavior, and application status	8
Microstructure evolution and mechanical properties improvement of (Ti8Zr6Nb4V5Cr4)100−xAlx lightweight high-entropy alloy by Laves phase transformation	8
Identification of working conditions and prediction of NOx emissions in iron ore fines sintering process	8
Machine learning assisted adaptable rolling for high strength steel	8
Effect of Nb addition on hole expansion ratio and its precipitation behavior in Ti-microalloyed hot-rolled high-strength steel	8
Optimization control of transverse thickness difference of silicon steel based on interpretable machine learning	8
Prediction of BOF endpoint carbon content and temperature via CSSA-BP neural network model	8
Double aging induced chemical heterogeneity overcoming strength–toughness tradeoff in cryogenic steel	8
Effect of H2O and temperature on coke gasification in N2–H2–H2O–CO–CO2 system	8
An atomic insight into effect of grain boundary on diffusion behavior of Cu/Al dissimilar materials undergoing ultrasonic welding	8
Mechanical properties and microstructural evolutions during hot deformation of Co–Cr–Fe alloy	8
Effect of extrusion temperature on microstructure and tensile properties of Mg–Gd–Er–Zn–Zr alloy containing LPSO phase	8
Impact of titanium on solidification behavior and macrostructure of 347H stainless steel	8
High-temperature creep rupture behavior of dissimilar welded joints of RAFM steel and 316L steel by friction stir welding	8
Recent progress in high entropy alloys: microstructure, mechanical properties, and corrosion behavior	8
A review on graphite surface modification methods towards low carbon-containing refractories	8
Prediction on sulfur content in hot metal during KR stirring desulfurization process using coupled three-dimensional flow and unreacted core model	8
Hot corrosion behavior of a Co–Ti–V precipitate-strengthened superalloy at 900 °C	8
Sn and Al whiskers growth on Cr–Al–B MAB phase formed during interfacial reaction between Fe–Cr–B cast steel and molten Al–Sn–Si alloy	8
Correction: Phosphorus-caused embrittlement of SA508Gr.4N reactor pressure vessel steel and its suppression by rare-earth cerium	8
Corrosion and passive behavior of SLM and wrought TA15 titanium alloys in hydrochloric acid solutions	8
Numerical simulation of combustion behaviors of pulverized municipal solid waste in raceway of blast furnace	8
A novel mechanism fusion data control method for slab camber in hot rolling	8
Influence of Al foil interlayer on performance of vacuum diffusion bonding joint of 6061 aluminium alloy	7