Journal of Materials Science & Technology

Article	Citations
Biocompatible hydrogel electrolyte with high ionic conductivity and transference number towards dendrite-free Zn anodes	478
Plasticity-induced stacking fault behaviors of γ’ precipitates in novel CoNi-based superalloys	424
Surface photodynamic ion sterilization of ITO-Cu2O/ZnO preventing touch infection	422
Unconventional metamagnetic phase transition in R2In (R=Nd, Pr) with lambda-like specific heat and nonhysteresis	336
Copper porphyrin within graphene hosts for high-performance lithium-ion battery cathodes	330
MXene derivative Ta4C3-Ta2O5 heterostructure as bi-functional barrier for Li-S batteries	312
A thermodynamic extremal principle incorporating the constraints from both fluxes and forces. I. Modeling	307
Optimization of the in vitro biodegradability, cytocompatibility, and wear resistance of the AZ31B alloy by micro-arc oxidation coatings doped with zinc phosphate	294
Vertically aligned cellulose nanofiber/carbon nanotube aerogel-infused epoxy nanocomposites for highly efficient solar-thermal-electric conversion	290
In-situ deformation mechanisms of a novel Ti-5Mo-4Cr-1V-1Zr metastable β titanium alloy	280
Enhancing the cavitation erosion resistance of additive manufactured Al-Si alloys with strong connective Si networks	276
Crack-free and high-strength AA2024 alloy obtained by additive manufacturing with controlled columnar-equiaxed-transition	274
Achieving ambient temperature quasi-superplasticity in a high strength Zn-2Cu-0.15Mg alloy with ultrafine/fine grained structure	254
Nanomechanical investigation on FCC metals surface patterning: shaping by stacking fault energy and strain rate	248
The opposite effect of β1/β″ on the ductility of aged Mg–3Nd–3Gd–0.2Zn–0.5Zr alloy	238
Realizing the purification and grain refinement of Mg-Gd-Y alloy by one-step flux refining	232
Synergistic effects of Nb and Mo on hydrogen-induced cracking of pipeline steels: A combined experimental and numerical study	222
Evaluation of high-temperature tensile behavior for metal foils by a novel resistance heating assisted tensile testing system using samples with optimized structures	220
Simultaneously improving the strength and ductility of AZ91/GNPs composites through decorating graphene nanoplatelets with MgO	218
Designing hetero-structured ultra-strong and ductile Zr-2.5Nb alloys: Utilizing the grain size-dependent martensite transformation during quenching	212
Illumination interface stability of aging-diffusion-modulated high performance InZnO/DyO transistors and exploration in digital circuits	212
Effect of columnar-to-equiaxed microstructural transition on the fatigue performance of a laser powder bed fused high-strength Al alloy	211
Toward qualification of additively manufactured metal parts: Tensile and fatigue properties of selective laser melted Inconel 718 evaluated using miniature specimens	208
Superelastic metastable Ti-Mo-Sn alloys with high elastic admissible strain for potential bio-implant applications	200
Bi-ZFO/BMO-Vo Z-scheme heterojunction photocatalysis-PMS bidirectionally enhanced coupling system for environmental remediation	199

Advancing heat-tolerant composites with coherent ladder interfaces via constructing extremely fine nanolamellar solute-twining architectures	198
Unexpected structural scaling and predictability in carbon nanotubes	196
Sulphur anion induced electronic structure regulation of RuO2 nanodots for efficient electrocatalytic overall water splitting	195
Charged particles: Unique tools to study irradiation resistance of concentrated solid solution alloys	193
Interfacial strengthening and antibacterial behavior in an ultrafine-grained Zn-Ag-based biocomposites fabricated by the Cu2O-induced in situ wetting approach	188
N and O vacancies regulation over semiconductor heterojunction to synergistically boost photocatalytic hydrogen peroxide production	184
Microstructural effects on shock-induced deformation behavior in CoCrNi medium-entropy alloy: A molecular dynamics study	181
Enhancing corrosion resistance of Mg-Alloys by regulating precipitates at grain boundaries using rare earth oxides	180
Revealing the coarsening behavior of precipitates and its effect on the thermal stability in Tʹ and ηʹ dual-phase strengthened Al-Zn-Mg-Cu alloys	180
Dilemma faced by photocatalytic overall water splitting	178
Nanotwining induced by tensile fatigue and dynamic impact of laser powder bed fusion additively manufactured CoCrFeNi high-entropy alloy	176
Nacre-inspired robust antifouling amorphous coating via in-situ constructing 3D interconnected diffusion channels	173
2D Ti3C2T modified with nano-AgPNPs antioxidant constructed hierarchical interface for high-throughput oily wastewater separation	173
High-stability organic transistors based on sandwich-structured composite dielectric layers	172
Robust and thermostable silicon-based aerogels towards highly efficient thermal insulation and microwave absorption	167
The mechanism of superior strength-ductility synergy in ultrafine-grained (FeCoNiV)93Al7 dual-phase high-entropy alloy via in-situ techniques	165
High-temperature mechanical behavior of ultra-coarse cemented carbide with grain strengthening	164
An S-scheme artificial photosynthetic system with H-TiO2/g-C3N4 heterojunction coupled with MXene boosts solar H2 evolution	163
Enhancing {101¯2	161
Laser manufactured-liquid metal nanodroplets intercalated Mxene as oil-based lubricant additives for reducing friction and wear	161
Air-stable, all-dry transferred ReS2/GaSe heterostructure-based NO2 gas sensor	160
Ovalbumin-loaded paramagnetic nano-triangles for enhanced dendritic cell stimulation, T1-MR imaging, and antitumor immunity	160
Porous hybrid scaffold strategy for the realization of lightweight, highly efficient microwave absorbing materials	158
Enhanced strength and ductility in a powder metallurgy Ti material by the oxygen scavenger of CaB6	157
Ce:GdYAG phosphor-in-glass: An innovative yellow-emitting color converter for solid-state laser lighting	156
Effect of seed orientations on crystallographic texture control in faceted Al2O3/YAG eutectic ceramic during directional solidification	155
Microstructure, magnetic domain and dynamic loss of surface-textured Fe-based nanocrystalline alloy	154
Formation mechanism of Fe-based amorphous powders produced by spark erosion	153
Stabilizing a severely deformed Al–7Mg alloy with a multimodal grain structure via Mg solute segregation	153
Optimizing mechanical properties in Al-Li alloys through synergistic regulation of dislocations and precipitates during creep aging	151
High-pressure induced microstructural evolution and phase transition in Ti-55511 alloy	151
Layer-by-layer self-assembly and clinical application in orthopedics	150
Micro-scaled plastic yielding and shear-banding dynamics in metallic glasses	148
The thermal instability mechanism and annealed deformation behavior of Cu/Nb nanolaminate composites	148
cardiGAN: A generative adversarial network model for design and discovery of multi principal element alloys	147
Development of the high-strength ductile ferritic alloys via regulating the intragranular and grain boundary precipitation of G-phase	146
Cubic crystal-structured Ge2Sb2Te5 with cation vacancies for enhanced lithium/sodium ion storage	145
A fast numerical method of introducing the strengthening effect of residual stress and strain to tensile behavior of metal matrix composites	145
Lattice oxygen-mediated Co–O–Fe formation in Co-MOF via Fe doping and ligand design for efficient oxygen evolution	145
Closely packed Si@C and Sn@C nano-particles anchored by reduced graphene oxide sheet boosting anode performance of lithium ion batteries	144
Mn3Ag(1-)Cu()N antiperovskite thin films with ultra-low temperature coefficient of resistance	144
Achievement of giant cryogenic refrigerant capacity in quinary rare-earths based high-entropy amorphous alloy	142
Mesoscale deformation mechanisms in relation with slip and grain boundary sliding in TA15 titanium alloy during tensile deformation	142
Solar fuel generation over nature-inspired recyclable TiO2/g-C3N4 S-scheme hierarchical thin-film photocatalyst	140
Effect of molybdenum on interfacial properties of titanium carbide reinforced Fe composite	140
A unique and well-designed 2D graphitic carbon nitride with sponge-like architecture for enhanced visible-light photocatalytic activity	139
Magnetoelectric coupling at microwave frequencies observed in bismuth ferrite-based multiferroics at room temperature	138
Shock compression and spallation damage of high-entropy alloy Al0.1CoCrFeNi	137
Tuning rheology and fire-fighting performance of protein-stabilized foam by actively switching the interfacial state of the liquid film	137
A 3D/0D cobalt-embedded nitrogen-doped porous carbon/supramolecular porphyrin magnetic-separation photocatalyst with highly efficient pollutant degradation and water oxidation performance	136

Microstructure and strength in ultrastrong cold-drawn medium carbon steel	135
Interaction between dynamic recrystallization and phase transformation of Ti-43Al-4Nb-1Mo-0.2B alloy during hot deformation	133
Substitutional silicon content effect on the structural/mechanical modification of metastable triplex high entropy alloys	133
Cost-efficient sunlight-driven thermoelectric electrolysis over Mo-doped Ni5P4 nanosheets for highly efficient alkaline water/seawater splitting	133
Evaluation of the stress corrosion crack growth behaviour of high-strength marine steel based on model of crack tip mechano-electrochemical effect	132
Enhancing CO2 photoreduction on Au@CdZnS@MnO2 hollow nanospheres via electron configuration modulation	132
Tailoring magnetic softness of Fe-based amorphous alloys with superior magnetization by magnetic field annealing	132
Microstructures, mechanical properties and in vitro corrosion behavior of biodegradable Zn alloys microalloyed with Al, Mn, Cu, Ag and Li elements	132
Multi-objective optimization of laser powder bed fused titanium considering strength and ductility: A new framework based on explainable stacking ensemble learning and NSGA-II	132
A review on additive manufacturing of ceramic matrix composites	132
High-entropy (Y0.2Gd0.2Dy0.2Er0.2Yb0.2)2Hf2O7 ceramic: A promising thermal barrier coating material	131
Electroplasticity in the Al0.6CoCrFeNiMn high entropy alloy subjected to electrically-assisted uniaxial tension	131
Dislocation source efficiency as a governing factor in the ductile-to-brittle transition of metals	130
3D flower-like hollow CuS@PANI microspheres with superb X-band electromagnetic wave absorption	130
Entropy-driven phase regulation of high-entropy transition metal oxide and its enhanced high-temperature microwave absorption by in-situ dual phases	129
Variant selection induced by electropulsing: Optimization in the microstructure of selective laser melted Ti-6Al-4 V alloy	128
One-step synthesis of zinc oxide-carbon microspheres decorated with multi-voids and carbon nanotubes via spray pyrolysis for enhanced stability in lithium metal anodes	128
Efficient rejuvenation of heterogeneous {[(Fe0.5Co0.5)0.75B0.2Si0.05]96Nb4}99.9Cu0.1 bulk metallic glass upon cryogenic cycling treatment	128
Improving electrical and thermal properties synchronously via introducing CsPbBr3 QDs into higher manganese silicides	128
Biomimetic melatonin-loaded silk fibroin/GelMA scaffold strengthens cartilage repair through retrieval of mitochondrial functions	128
The synergistic effect of Lewis acidic etching V4C3(MXene)@CuSe2/CoSe2 as an advanced cathode material for aluminum batteries	127
3D printed propeller-like metamaterial for wide-angle and broadband microwave absorption	126
Mechanical response and microstructural evolution of a composite joint fabricated by green laser dissimilar welding of VCoNi medium entropy alloy and 17-4PH stainless steel	125
Exceptional grain refinement induced by dispersed MgO particles in TIG-welded AZ31 alloy	125
Pressure-driven anomalous thermal transport behaviors in gallium arsenide	124
Influence of Ta/Al ratio on the microstructure and creep property of a Ru-containing Ni-based single-crystal superalloy	123
Sandwich structure confined gold as highly sensitive and stable electrochemical non-enzymatic glucose sensor with low oxidation potential	122
In-situ embedded ultrafine Bi12O17Br2 nanotubes in MOF-derived hierarchical porous carbon for enhanced photocatalytic CO2 conversion to CO	121
Engineering nano-structures with controllable dimensional features on micro-topographical titanium surfaces to modulate the activation degree of M1 macrophages and their osteogenic potential	120
High efficiency photothermal cyclic self-healing antibacterial coating based on in-situ dual-functional BiOI@Bi2S3	119
High-resolution characterization of the fretting corrosion of Alloy 690 in the simulated secondary water of pressurized water reactor	119
A theoretical and experimental study of deformation mechanism dictated by disclination-dislocation coupling in Mg alloys at different temperatures	119
TiO2 doping promoted nucleation of CsPbX3 (X = Cl, Br, I) quantum dots in glass with improved luminescent performance and stability	119
Vertical nanowires enhanced X-ray radiation damage of cells	119
Biofilm ablation on titanium alloy surface by photothermal and chemotherapeutic synergistic therapy	118
Correlation between depassivation and repassivation processes determined by single particle impingement: Its crucial role in the phenomenon of critical flow velocity for erosion-corrosion	118
The lattice friction stress driven temperature-dependent tensile deformation behaviors of CoNiCr2 eutectic medium-entropy alloy	117
Oxygen vacancies in Z-scheme r-MIL-88A/OV-BiOBr heterojunctions enhance photo-Fenton degradation of chloroquine phosphate: Mechanisms insight, DFT calculations, degradation pathways and toxicity asses	116
Surface micromorphology and nanostructures evolution in hybrid laser processes of slicing and polishing single crystal 4H-SiC	116
Effect of mechanical stresses on degradation behavior of high-purity magnesium in bone environments	116
Evolution process of precipitate-free zones in a Mg-Gd alloy during creep	115
Controllable growth of wafer-scale two-dimensional PdS2Se2(1−) nanofilms with fully tunable compositions for high-performance photodetectors	115
Ordered structures with Schottky heterojunction functional unit regulate immune response and osteogenesis	115
Extraordinary high-temperature mechanical properties in binder-free nanopolycrystalline WC ceramic	115
Nanoprecipitation induced giant magnetostriction: A time-resolved small-angle neutron scattering study of the vacancy-assisted kinetics	115
Oleophobic interaction mediated slippery organogels with ameliorated mechanical performance and satisfactory fouling-resistance	113
Solid dust induced roughening and overheating of TBC-coated superalloy	113
Oxygen vacancies at antiphase boundaries in cation-disordered spinel ferrite	113
In-situ study of damage mechanisms in Mg–6Li dual-phase alloy	113
Graphene reinforced nanoarchitectonics of 3D interconnected magnetic-dielectric frameworks for high-efficient and anti-corrosive microwave absorbers	113
Deformation-induced interfacial-twin-boundary ω-phase in an Fe48Mn37Al15 body-centered cubic metastable alloy	112
Regulating the intrinsic electronic structure of carbon nanofibers with high-spin state Ni for sodium storage with high-power density	111
Enhanced thermoelectric performance of n-type Bi2Te2.7Se0.3 via a simple liquid-assisted shear exfoliation	111
Metastable core-shell precipitation strengthened high-entropy alloys fabricated by direct energy deposition with multi-stage terrace-like slip wave toughening	111
High strength Al0.7CoCrFeNi2.4 hypereutectic high entropy alloy fabricated by laser powder bed fusion via triple-nanoprecipitation	110
Degradation particles derived from high-purity magnesium inhibit osteogenic differentiation through regulation of macrophage polarization	110
High-entropy transition metal carbide nanowires with enhanced microwave absorption properties	109
Enhancement of strength and ductile-brittle transition temperature of SA508 Gr.3 low-alloy steel by controlling heat accumulation in laser powder-directed energy deposition	109
A review of Al2O3-based eutectic ceramics for high-temperature structural materials	109
Laser powder bed fusion of copper matrix iron particle reinforced nanocomposite with high strength and high conductivity	108
Effects of Mg17Al12 phase on microstructure evolution and ductility in the AZ91 magnesium alloy during the continuous rheo-squeeze casting-extrusion process	108
A new strengthening mechanism driven by disruptive shear and solute segregation during warm rolling in 1.4 GPa class 12.5 wt% Al added-FeMnC ultra-lightweight steel	108
Ultrafine grained metastable Ti6Al4V5Cu alloy with high strength and excellent low-cycle fatigue property	108
Microstructural evolution, mechanical properties and corrosion mechanisms of additively manufactured biodegradable Zn-Cu alloys	108
Solid solution strengthening of high-entropy alloys from first-principles study	108
Hot extrusion-induced Mg-Ni-Y alloy with enhanced hydrogen storage kinetics	107
Facile synthesis of Fe single-atom porous photocatalysts via direct metal atomization achieving efficient photocatalytic nitrogen fixation	107
Hierarchically architected biomass-derived magnetic aerogels for broadband electromagnetic attenuation and functionalities	107
Mechanisms of plastic deformation and mechanical strengthening in nano-scale Ti-Ti2Cu eutectoids: A study combined molecular dynamics simulation and experiment	106
Morphology and orientation evolution of Cu6Sn5 grains on (001)Cu and (011)Cu single crystal substrates under temperature gradient	106
Integration of MXene and polymer: Unlocking the full potential of multifunctional composites for electromagnetic interference shielding	106
Enhanced bioactivity and interfacial bonding strength of Ti3Zr2Sn3Mo25Nb alloy through graded porosity and surface bioactivation	106
Amorphous high-entropy phosphoxides for efficient overall alkaline water/seawater splitting	105
Short-range ordering plays a determining role in the low-cycle fatigue life improvement of fcc metals: A conclusive study on low solid-solution hardening Ni-Cr alloys	105
Improving dispersion and delamination of graphite in biodegradable starch materials via constructing cation-π interaction: Towards microwave shielding enhancement	105
Mo-doped CoP nanoparticles anchored on porous Co-N-C framework as an efficient bifunctional electrocatalyst for pH-universal water splitting	104
Thermodynamics-based sealing method for anodized aluminum used in semiconductor processing apparatuses	104
Improving the strength and SCC resistance of an Al-5Mg-3Zn alloy with low-angle grain boundary structure	104
Ceramic composites toughened by vat photopolymerization 3D printing technology	103
Regulation of the pore structure of carbon nanosheets based electrocatalyst for efficient polysulfides phase conversions	103

Corrosion behavior of 13Cr stainless steel under stress and crevice in high pressure CO2/O2 environment	103
Wearable sensors and supercapacitors using electroplated-Ni/ZnO antibacterial fabric	103
Overcoming poisoning issues in hydrogen fuel cells with face-centered tetragonal FePt bimetallic catalysts	103
Constructing a novel bi-lamellar microstructure in selective laser melted Ti-6Al-4V alloy via electropulsing for improvement of strength and corrosion resistance	103
Energy band engineering of Bi2O2.33CdS direct Z-scheme heterojunction for enhanced photocatalytic reduction of CO2	103
Antifouling nanocomposite polymer coatings for marine applications: A review on experiments, mechanisms, and theoretical studies	102
Synergistic engineering of cobalt selenide and biomass-derived S, N, P co-doped hierarchical porous carbon for modulation of stable Li-S batteries	102
Defect-induced insulator-metal transition and negative permittivity in La1-Ba CoO3 perovskite structure	102
New insights into the mechanism of localised corrosion induced by TiN-containing inclusions in high strength low alloy steel	102
Li- and Mg-based borohydrides for hydrogen storage and ionic conductor	102
Mechanically durable antibacterial nanocoatings based on zwitterionic copolymers containing dopamine segments	102
Interface strain engineering of Ir clusters on ultrathin NiO nanosheets for electrochemical water splitting over 1800 hours	101
Preferential fatigue cracking at basal twist grain boundary (BTGB) in bimodal Ti-5Al-4V alloy: Dislocation activities and crack initiation	101
In-situ TEM observation of the evolution of helium bubbles & dislocation loops and their interaction in Pd during He+ irradiation	101
Inhibiting segregation enabled outstanding combination of mechanical and corrosion properties in precipitation-strengthened aluminum alloys	101
A new strategy for fabrication of unique heterostructured titanium laminates and visually tracking their synchronous evolution of strain partitions versus microstructure	100
Constructing crystalline homophase carbon nitride S-scheme heterojunctions for efficient photocatalytic hydrogen evolution	100
Ce-doping-induced defect effects boosting H2 generation	99
Post-synthetic modifications (PSM)-induced defects in hybrid metal-organic frameworks (MOFs) to unleash potential in gas separation membrane applications	99
Simultaneous improvement of tensile ductility and fracture strain for dual-phase steels over 1000 MPa	99
Characteristic dislocation slip behavior in polycrystalline HfNbTiZr refractory medium entropy alloy	98
Highly integrated smart mountaineering clothing with dual-mode synergistic heating and sensitive sensing for personal thermal management and human health monitoring	98
Pomegranate-like ATO/SiO2 microspheres for efficient microwave absorption in wide temperature spectrum	98
SnTe nanoparticles physicochemically encapsulated by double carbon as conversion-alloying anode materials for superior potassium-ion batteries	97
Multifunctional hydrophobic fabric-based strain sensor for human motion detection and personal thermal management	97
Two birds with one stone: Construction of bifunctional-POSS hybridized boron-silicon ceramicized phenolic composites and its ablation behavior	97
Superior dynamic shear properties by structures with dual gradients in medium entropy alloys	97
Achieving very high cycle fatigue performance of Au thin films for flexible electronic applications	97
Biomass-derived oriented carbon aerogels with integrated high-performance microwave absorption and thermal insulation	96
Microstructure evolution and strengthening mechanisms of a high-performance TiN-reinforced Al–Mn–Mg–Sc–Zr alloy processed by laser powder bed fusion	96
The physical origin of observed repulsive forces between general dislocations and twin boundaries in FCC metals: An atom-continuum coupling study	96
Theoretical predictions and experimental verification on the phase stability of enthalpy-stabilized HE TMREB2s	96
Microstructural refinement mechanism and its effect on toughness in the nugget zone of high-strength pipeline steel by friction stir welding	96
Dopant-impurity interactions on grain boundary segregation in alumina	95
Non-associative learning behavior in mixed proton and electron conductor hybrid pseudo-diode	95
Electrochemical CO2 fixation in molten salts: A pathway towards the fabrication of exceptional carbon-based materials for pollutant removal	95
Coherent interface driven super-plastic elongation of brittle intermetallic nano-fibers at room temperature	95
Homogeneous intercalated graphene/manganic oxide hybrid fiber electrode assembly by non-liquid-crystal spinning for wearable energy storage	95
A new route to bulk nanostructured multiphase alloys with ultrahigh hardness	94
Templated spherical coassembly strategy to fabricate MoS2/C hollow spheres with physical/chemical polysulfides trapping for lithium-sulfur batteries	94
Size-dependent uniform deformation transitions enabling hardness and toughness enhancement of nanocrystalline Cr2AlC MAX phase	94
3D/4D additive–subtractive manufacturing of heterogeneous ceramics	94
Microstructure and wear behavior of IC10 directionally solidified superalloy repaired by directed energy deposition	94
Corrigendum to “The Synergy Between Cement Spheroidization and Cu Alloying on the Corrosion Resistance of Ferrite-Pearlite Steel in Acid Chloride Solution” [J. Mater. Sci. Technol. 84 (2021) 65-75]	93
Cross-linked lipoic acid nanoparticles with indole-3-methanol loading for the PTEN-mediated TNBC treatment	93
Variation of mechanical properties and microstructure of hot-rolled AA2099 Al-Li alloy induced by the precipitation during preheating process	93
Corrigendum to “Stress-controlled fatigue of HfNbTaTiZr high-entropy alloy and associated deformation and fracture mechanisms” [Journal of Materials Science & Technology, 114 (2022) 191–205]	93
Orientation and mobility control of 4HCB organic film for flexible X-ray detectors with high performance	93
Liquid exfoliation of stanene as degradable nanoagents for NIR-II photothermal therapy	92
Dislocation ordering and texture strengthening of naturally aged Al-Cu-Mg alloy	92
Observation of magnetic domain evolution in constrained epitaxial Ni–Mn–Ga thin films on MgO(0 0 1) substrate	92
Quantitative reorientation behaviors of macro‐twin interfaces in shape‐memory alloy under compression stimulus in situ TEM	92
Effect of large thickness-reduction on microstructure evolution and tensile properties of Mg-9Al-1Zn alloy processed by hard-plate rolling	92
A review of the progress and challenges of counter-gravity casting	91
In situ atomic-scale observation of deformation-induced reversible martensitic transformation in a CrMnFeCoNi high entropy alloy	91
Synergistic engineering of oxygen vacancies and Schottky junctions for enhanced solar-driven nitrogen fixation on hierarchical hollow Bi4Ti3O12	91
Effect of local loading on microstructure and enhanced mechanical property of large complex castings prepared by Al–Si–Fe–Mn–Mg–Cu alloy during squeeze casting	91
Hardness-strength-toughness synergy of (NbMoTaW)C through TiC-TiO2 dual-phase engineering	91
Constructing in-situ polymerized electrolyte for room-temperature solid-state chloride ion battery with enhanced electrochemical performance	91
Highly dispersed Pd clusters/nanoparticles encapsulated in MOFs via in situ auto-reduction method for aqueous phenol hydrogenation	90
S-scheme Mo-WO3/CeO2 microspheres photoanode enabling high-efficiency power generation in H2O2 photoelectrochemical cell	90
A novel fine-grained TiZrCu alloy tailored for marine environment with high microbial corrosion-resistance	90
Modified NiFe-MOF with defects induced by -NH2 and -SH for enhanced adsorption and photocatalytic reduction of CO2	90
Multifunctional flower-like core-shell Fe/Fe4N@SiO2 composites for broadband and high-efficiency ultrathin electromagnetic wave absorber	90
The precipitation evolution and coarsening resistance of dilute Al-Zr-Er-Yb (-Sc) alloys	90
Variant selection in laser powder bed fusion of non-spherical Ti-6Al-4V powder	90
Mixed-phase composites derived from cobalt terephthalate as efficient battery-type electrodes for high-performance supercapattery	90
Infrared-harvesting colloidal quantum dot inks for efficient photovoltaics: Impact of surface chemistry and device engineering	89
Interplay between the interfacial Mo–N bonds within MoC nanodot/N-doped carbon composites for efficient photocatalytic reduction of Cr(VI) and hydrogen evolution reaction	89
Constructing heterostructures of ZIF-67 derived C, N doped Co2P and Ti2VC2T MXene for enhanced OER	89
Triple-function Mn regulation of NiFe (oxy)hydroxide for oxygen evolution reaction	89
Effect of natural ageing on the early-stage ageing response of an Al-Mg-Si-Cu alloy	88
Carbon polyhedra encapsulated Si derived from Co-Mo bimetal MOFs as anode materials for lithium-ion batteries	88
Fabrication of nitrogen-doped reduced graphene oxide/tricobalt tetraoxide composite aerogels with high efficiency, broadband microwave absorption, and good compression recovery performance	88
Tuning the growth of intermetallic compounds at Sn-0.7Cu solder/Cu substrate interface by adding small amounts of indium	88
MXene-based thermoelectric fabric integrated with temperature and strain sensing for health monitoring	88
A HAase/NIR responsive surface on titanium implants for treating bacterial infection and improving osseointegration	87
Highly efficient removal of trace lead (II) from wastewater by 1,4-dicarboxybenzene modified Fe/Co metal organic nanosheets	87
Construction of medium-entropy alloys coupled Z-Scheme heterojunction and its enhanced photocatalytic performance by regulating mechanism of LSPR effect	87
The influence of nanosized precipitates on Portevin-Le Chatelier bands and surface roughness in AlMgScZr alloy	87
Aging phenomena of backsheet materials of photovoltaic systems for future zero-carbon energy and the improvement pathway	86
Reactive processing of poly(lactic acid)/poly(ethylene octene) blend film with tailored interfacial intermolecular entanglement and toughening mechanism	86
Ultrafast pressure sintering of B4C-based composites via direct Joule heating	86
Distinguished roles of static aging and strain aging in the microstructure and creep resistance of Mg-4Y-3.5Nd alloy	86
Effects of surface grinding for scratched alloy 690TT tube in PWR nuclear power plant: Microstructure and stress corrosion cracking	86
Reversible Zn stripping/plating achieved by surface thin Sn layer for high-performance aqueous zinc metal batteries	86
Dual-inorganic-rich artificial interphase for sodium metal batteries	85
Nanoscaled MnSnO2@CsPbBr3 quantum dots heterostructure photocatalyst as efficient organic pollutants degradation by peroxymonosulfate; DFT calculation	85
A wide-linear-range and low-hysteresis resistive strain sensor made of double-threaded conductive yarn for human movement detection	85
Enhanced strength-ductility synergy in a gradient pseudo-precipitates heterostructured Al-2.5%Mg alloy: Design, fabrication, and deformation mechanism	85
Development of Ti-Al-Ta-Nb-(Re) near-α high temperature titanium alloy: Microstructure, thermal stability and mechanical properties	84
Ultrahigh tensile strength achieved in a lightweight medium Mn steel via prominent work hardening	84
One step hot-pressing method for hybrid Li metal anode of solid-state lithium metal batteries	84
Dual-phase synergistic deformation characteristics and strengthening mechanism of AlCoCrFeNi2.1 eutectic high entropy alloy fabricated by laser powder bed fusion	84
Martensitic transformation induced strength-ductility synergy in additively manufactured maraging 250 steel by thermal history engineering	83