Chinese Journal of Chemical Engineering

Article	Citations
Catalytic oxidation of methane for methanol production over copper sepiolite: Effect of noble metals	107
Study on trifluoromethanesulfonic acid-promoted synthesis of daidzein: Process optimization and reaction mechanism	72
Preparation of PrFe Co1–O3/Mt catalyst and study on degradation of 2-hydroxybenzoic acid wastewater by catalytic wet peroxide oxidation	69
Box-Behnken experimental design for optimizing process parameters in carbonate-promoted direct thiophene carboxylation reaction with carbon dioxide	64
Plant-inspired biomimetic hybrid PVDF membrane co-deposited by tea polyphenols and 3-amino-propyl-triethoxysilane for high-efficiency oil-in-water emulsion separation	51
A theoretical insight about co-pyrolysis reaction of natural gas and coal	50
Investigation of reaction pathways and kinetics in the gas-phase noncatalytic oxidation of hexafluoropropylene	49
Application of different fiber structures and arrangements by electrospinning in triboelectric nanogenerators	48
Exploring influence of MgO/CaO on crystallization characteristics to understand fluidity of synthetic coal slags	47
Graphene oxide framework membranes intercalated by poly(sodium 4-styrenesulfonate) for efficient desalination	46
Numerical simulation of gas–liquid flow in the bubble column using Wray–Agarwal turbulence model coupled with population balance model	46
Enhancing laccase stability and activity for dyes decolorization using ZIF-8@MWCNT nanocomposite	45
The phase behaviors of W/O microemulsion with Cu(Ac)2 -Zn(Ac)2 solution as aqueous phase	43
A parallel chemical reaction optimization method based on preference-based multi-objective expected improvement	43
Study of the reaction mechanism for preparing powdered activated coke with SO2 adsorption capability via one-step rapid activation method under flue gas atmosphere	43
A route for the study on mass transfer enhancement by adding particles in liquid phase	43
A general pressure drop model based on liquid holdup of gas–liquid flow in micro-packed beds	42
Integrated scrubber for enhanced purity of alkaline electrolyzed water system	42
Fabrication of highly dispersed carbon doped Cu-based oxides as superior selective catalytic oxidation of ammonia catalysts via employing citric acid-modified carbon nanotubes doping CuAl-LDHs	41
Influence of CO2 inleakage on the slight-alkalization of generator internal cooling water	40
Extrusion of honeycomb monoliths of ZSM-5: A systematic method for determining the plasticity of zeolite pastes and optimizing extrusion workability	39
Synthesis of magnetically separable and recyclable MnFe2O4@SiO2@NH2 nanocomposite coupled-acylated MWCNTS with enhanced photocatalytic performance under visible-light irradiation	39
Temperature-controlled flexible metal–organic frameworks for propylene/propane separation	39
Current advances in distillation processes for fermentative acetone-butanol-ethanol purification	38
Comprehensive analysis on the economy and energy demand of pressure-swing distillation and pervaporation for separating waste liquid containing multiple components	37

Decontamination of Cr(VI) from water using sewage sludge-derived biochar: Role of environmentally persistent free radicals	35
Evaluating two stages of silicone-containing arylene resin oxidation via experiment and molecular simulation	34
Micromixing efficiency and enhancement methods for non-Newtonian fluids in millimeter channel reactors	33
Dual-site engineering of Ga-modified HZSM-5 towards efficient propane aromatization	33
Investigation on the synthesis conditions of poly(4-methyl-1-pentene) hollow fiber membrane with high gas permeability and strong tensile strength	33
Dual responsive block copolymer coated hollow mesoporous silica nanoparticles for glucose-mediated transcutaneous drug delivery	33
Comparative techno–economic and environmental assessment of hydrogen–to–carbon ratio adjustment strategies in biogas to methanol processes	32
Molecular dynamics simulation study on π-π stacking of Gemini surfactants in oil/water systems	32
Prediction of NOx concentration using modular long short-term memory neural network for municipal solid waste incineration	31
Alkylation of benzene and 1-dodecene over cerium-silicate pillared MWW zeolite	30
Design, synthesis, and nanoengineered modification of spherical graphene surface by layered double hydroxide (LDH) for removal of As(III) from aqueous solutions	29
CFD investigation in the temperature effect on coal catalytic hydrogasification in the pressurized bubbling fluidized bed	29
MXene-supported dense cobalt phosphide nanoparticles as cathode for enhanced cycle stability in lithium-sulfur batteries	29
Mechanistic insights into the active intermediates of 2,6-diaminopyridine dinitration	28
Extractive distillation and pressure swing distillation for the separation of the azeotrope of nitric acid-water: process optimization and economic comparison	28
Rapid hydrate formation and efficient gas separation based on aqueous solid carrier	28
Construction of macromolecular model for Ningdong coal and simulation of gasification reaction	28
Solid–liquid phase equilibria in the aqueous system containing the chlorides of potassium, ammonium, and calcium at 298.2, 323.2, and 348.2 K	28
Metal oxide particle electrodes for degradation of high concentration phenol wastewater via electrocatalytic advanced oxidation	28
Direct atomic-level insight into oxygen reduction reaction on size-dependent Pt-based electrocatalysts from density functional theory calculations	27
Fabrication of anti-fouling polyamide nanofiltration membrane by incorporating streptomycin as a novel co-monomer	27
The effects of amino groups and open metal sites of MOFs on polymer-based electrolytes for all-solid-state lithium metal batteries	27
In situ investigation of lysozyme adsorption into polyelectrolyte brushes by quartz crystal microbalance with dissipation	27
Physically-consistent-WGAN based small sample fault diagnosis for industrial processes	26
Substrate-free spatial separation pyrolysis for uniform iron/cobalt/nickel-based nanocatalysts enabling high-performance rechargeable zinc-air batteries	25
Intelligent prediction of ionic liquids and deep eutectic solvents by machine learning	25
Systematic investigation of SO2 adsorption and desorption by porous powdered activated coke: Interaction between adsorption temperature and desorption energy consumption	25
Sulfonation of 1,4-diaminoanthraquinone leuco by chlorosulfonic acid: Kinetics and process intensification	25
Preparation and evaluation of controllable drug delivery system: A light responsive nanosphere based on β-cyclodextrin/mesoporous silica	25
Impact of CO2 as an oxidant on the decarburization and chromium retention and an approach for CO2 recycling	25
Recent progress on nanomaterial-based electrochemical dissolved oxygen sensors	24
Experimental study on secondary air mixing along the bed height in a circulating fluidized bed with a multitracer-gas method	24
Three-dimensional porous bimetallic metal–organic framework/gelatin aerogels: A readily recyclable peroxymonosulfate activator for efficient and continuous organic dye removal	24
Catalytic depolymerization of organic extraction pine lignin over Ni/MLG coupled with NaOH for aromatic monomer production	24
Continuous monitoring of residual water content in boiling water-hydrocarbon emulsions during thermomechanical dehydration	24
Closed-loop scheduling optimization strategy based on particle swarm optimization with niche technology and soft sensor method of attributes-applied to gasoline blending process	23
Flow characteristics simulation and parameter optimization of hydroxyl-terminated polybutadiene (HTPB) propellants resonant acoustic mixing	23
Enhanced ortho-selective t–butylation of phenol over sulfonic acid functionalized mesopore MTW zeolites	23
Process fault root cause diagnosis through state evolution mapping based on temporal unit shapelets	23
Multivariable identification of membrane fouling based on compacted cascade neural network	23
The critical role of Zr in controlling the activity of Pd/Beta on the hydrogenation of phenol to cyclohexanone	23
In-situ synthesis of rare earth Y-type zeolite enhanced by high-gravity technology	23
Identification of a sensor histidine kinase (BfcK) controlling biofilm formation in Clostridium acetobutylicum	23
Separation and recovery of V/W/Na from waste SCR catalyst leaching solution using membrane electrolysis – Ion morphology pretreatment solvent extraction-stripping method	23
Enhanced electrocatalytic activities in TiO2-sulfur nanoparticles decorated graphene nanocomposite electrode for detecting formaldehyde compound	23
Machine-learning-assisted high-throughput computational screening of the n-hexane cracking initiator	22
Separation of fuel additives based on mechanism analysis and thermodynamic phase behavior	22
Improving CO2 solubility in a hybrid sorbent of 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide/mesoporous titanium dioxide/water with confinement effect	22
Cascade equilibrium stage relaxation method by introducing equilibrium efficiency parameter	22
Editorial Board	22

Comparative analysis on gas–solid drag models in MFIX-DEM simulations of bubbling fluidized bed	22
Controllable synthesis of Ni3S2/V3S4@NF-xF (x=0, 4, 8) catalysts for efficient hydrogen production in seawater and urea electrolyte	21
Solid–liquid equilibrium and yield correlation model of melt crystallization of dimethylphenol isomer mixtures	21
Synergistic mechanism and product analysis of powder and combustible gas explosion–A comprehensive review	21
Microinterface intensification in hydrogenation and air oxidation processes	21
CFD simulation of flow and mixing characteristics in a stirred tank agitated by improved disc turbines	21
Separation of a C3H6/C2H4 mixture using Pebax® 2533/PEG600 blend membranes	21
The Joule–Thomson effect of (CO2 + H2) binary system relevant to gas switching reforming with carbon capture and storage (CCS)	21
Numerical and experimental study on the particle erosion and gas–particle hydrodynamics in an integral multi-jet swirling spout-fluidized bed	20
Viscosity reduction of tapioca starch by incorporating with molasses hydrocolloids	20
The establishment of Boron nitride@sodium alginate foam/polyethyleneglycol composite phase change materials with high thermal conductivity, shape stability, and reusability	20
Editorial Board	20
Research progress on catalysts for organic sulfur hydrolysis: Review of activity and stability	20
Study on cavern evolution and performance of three mixers in agitation of yield-pseudoplastic fluids	20
Durable self-cleaning superhydrophobic composite coatings based on fluorine-modified organic polysilazane and SiO2 particles prepared by facile spraying technique	19
Simultaneous removal of sulfur dioxide and nitrogen oxide from flue gas by phosphorus sludge: The performance and absorption mechanism	19
Configuring topologically optimum vapor recompressed dividing-wall distillation columns to maximize operating efficiency	19
Festschrift in honor of Professor K.T. Yu (Guocong Yu) and the 40th anniversary of the CJChE	19
Enhancement of catalytic and anti-carbon deposition performance of SAPO-34/ZSM-5/quartz films in MTA reaction by Si/Al ratio regulation	19
Modeling and analysis of air combustion and steam regeneration in methanol to olefins processes	19
Properties evolutions during carbonization of carbon foam using lignin as sole precursor	19
Decoupling combustion of coal briquettes and coal-biomass blends in a pilot-scale test facility for novel grate boilers	19
Advances in the preparation process and mechanism study of high-purity anhydrous magnesium chloride from magnesium chloride hexahydrate	19
Multi-objective optimization of wastewater treatment using electrocoagulation	19
Filtration performance and modeling of granular bed for dust removal from coal pyrolytic vapors	19
Corrigendum to “Conjugation of a zwitterionic polymer with dimethyl chains to lipase significantly increases the enzyme activity and stability” [Chinese J. Chem. Eng. 47 (2022) 48–53]	19
Polyoxymethylene dimethyl ethers synthesis from methanol and formaldehyde solution over one-pot synthesized spherical mesoporous sulfated zirconia	18
Phenylboronic acid functionalized polyacrylonitrile fiber for efficient and green synthesis of bis(indolyl)methane derivatives	18
Rapid velocity reduction and drift potential assessment of off-nozzle pesticide droplets	18
Study on an improved rotating microchannel separator in the intensification for demulsification and separation process	18
Flower-like tin oxide membranes with robust three-dimensional channels for efficient removal of iron ions from hydrogen peroxide	18
Thermodynamics insights into the gas-phase synthesis of glycolide from methyl glycolate	18
UV/Vis-based process analytical technology to improve monoclonal antibody and host cell protein separation	18
Editorial Board	18
Polygonal mesopores microflower catalysts for the catalytic oxidation of 2-nitro-4-methylsulfonyltoluene to 2-nitro-4-methylsulfonylbenzoic acid in a continuous-flow microreactor	18
Efficient adsorption separation of methane from C2–C3 hydrocarbons in a Co(II)-nodes metal–organic framework	17
Inhibition research of double protection on flame propagations of hydrogen doped methane explosions	17
Thermal aging and pyrolysis behavior of hyperbranched polymers grafted carbon fibers reinforced phthalonitrile/cyanate ester blend composites	17
Synthesis of waterborne polyurethane–humic acid cross-linked biomass porous materials for the adsorption of methylene blue	17
Recent advances in preparation of metallic superhydrophobic surface by chemical etching and its applications	17
Enhanced photocatalytic activity of methylene blue using heterojunction Ag@TiO2 nanocomposite: Mechanistic and optimization study	17
A thermodynamic view on the in-situ carbon dioxide reduction by biomass-derived hydrogen during calcium carbonate decomposition	17
Imidazole-based porous organic polymers featuring hydrogen bond donors as environmentally friendly heterogeneous catalysts for efficient CO2 conversion	17
Dynamic behavior of a single bubble in cavity flow driven by a turbulent channel	17
Metal–organic-framework-derived copper-based catalyst for multicomponent C–S coupling reaction	17
Measurement and model of density, viscosity, and hydrogen sulfide solubility in ferric chloride/trioctylmethylammonium chloride ionic liquid	17
Formation and regulation of non-Newtonian droplets in T-junction microchannels: Effect of contact angle	17
Preparation and properties of antibacterial PVA@MCC composite membrane assisted by ionic liquids and DMSO	17
Laser-enhanced high-magnification telecentric imaging system for multiphase flow monitoring in membrane fouling	17
Two dimensional MoS2 finding its way towards constructing high-performance alkaline recovery membranes	17
Research and development of advanced structured packing in a rotating packed bed	16
Photocatalytic ozonation-based degradation of phenol by ZnO–TiO2 nanocomposites in spinning disk reactor	16
Fabrication of adsorbents with enhanced CuI stability: Creating a superhydrophobic microenvironment through grafting octadecylamine	16
Removal of rubidium from brine by an integrated film of sulfonated polysulfone/graphene/potassium copper ferricyanide	16
Model-based risk assessment on dynamic control of twin-column continuous capture under feedstock variations	16
Preparation and characterization of high performance super activated carbon based on coupled coal/sargassum precursors	16
Effects of tube cross-sectional shapes on flow pattern, liquid film and heat transfer of n-pentane across tube bundles	16
Preparation of polystyrene microspheres by suspension polymerization: A review	16
Wear resistance performance of high entropy alloy–ceramic coating composites synthesized via a novel combined process	16
Selective hydrogenation of dimethyl toluene-2,4-dicarbamate over supported Rh-based catalysts: Effect of support properties	16
Nitrogen and phosphorus co-doped activated carbon induces high density Cu+ active center for acetylene hydrochlorination	16
A data-driven model of drop size prediction based on artificial neural networks using small-scale data sets	16
A data-driven identification method for reaction rate constant and diffusion coefficient in the P2D model	16
Occurrence, characteristics and removal of microplastics in wastewater treatment plants with different treatment processes	16
Experimental study on reactivity and inorganic component transformation of activated fuels in a fluidized bed	16
Modulating titanium dioxide electron transport layer by self-doping for high-efficiency carbon-based perovskite solar cells	15
Enhanced selective hydrogenation of glycolaldehyde to ethylene glycol over Cu0-Cu+ sites	15
Fabrication of super-elastic graphene aerogels by ambient pressure drying and application to adsorption of oils	15
Integrated vacuum pressure swing adsorption and Rectisol process for CO2 capture from underground coal gasification syngas	15
Magnetic graphene oxide-anchored Ni/Cu nanoparticles with a Cu-rich surface for transfer hydrogenation of nitroaromatics	15
Measurement and calculation of solid–liquid equilibria of two quinary systems LiBr–NaBr–MgBr2–SrBr2–H2O and LiBr–KBr–MgBr2–SrBr2–H2O at 298.15 K	15
A highly hydrothermal stable copper-based catalyst for catalytic wet air oxidation of m-cresol in coal chemical wastewater	15
Removal of deposited metal particles on a horizontal surface by vertical submerged impinging jets	15
Two-tier control structure design methodology applied to heat exchanger networks	15
Thixotropic composite hydrogels based on agarose and inorganic hybrid gellants	15
Boron-modified ZSM-5 coated on honeycomb monolith surface for selective production of propylene from methanol	15
An integrated technology for the absorption and utilization of CO2 in alkanolamine solution for the preparation of BaCO3 in a high-gravity environment	15
Influence of mineral species on oil–soil interfacial interaction in petroleum-contaminated soils	15
Modeling solubility of oxaprozin and irbesartan in biorelevant complex solutions based on a combination of pH-dependent and micellar solubilization models	15
Numerical study on the hydrodynamics behavior of a central insert microchannel	15

Microwave-assisted dehydration of strontium hydroxide octahydrate: Experimental study and kinetic modeling analysis	15
The feasibility for natural graphite to replace artificial graphite in organic electrolyte with different film-forming additives	15
Highly efficient visible/near-infrared light photocatalytic degradation of antibiotic wastewater over 3D yolk-shell ZnFe2O4 supported 0D carbon dots with up-conversion property	15
Rheological study of methane gas hydrates in the presence of micron-sized sand particles	15
Preparation and modification of membranes for extracorporeal membrane oxygenator: A review	15
An internal circulation iron–carbon micro-electrolysis reactor for aniline wastewater treatment: Parameter optimization, degradation pathways and mechanism	14
Oil-in-water nanoemulsions loaded with lycopene extracts encapsulated by spray drying: Formulation, characterization and optimization	14
Solid − liquid phase diagram of the KNO3 - Ca(NO3)2 - Mg(NO3)2 - H2O system at 313.15 K	14
Progress in research of process intensification of spouted beds: A comprehensive review	14
Engineering stable multi-component pH responsive nanomedicine for enhanced photothermal/photodynamic therapy	14
Reaction process optimization based on interpretable machine learning and metaheuristic optimization algorithms	14
Effects of ionic liquids on the vapor–liquid equilibriumof 1,3,5-trioxane–water system at 101.3 kPa	14
Hollow ZIF-67-derived Co@N-doped carbon nanotubes boosting the hydrogenation of phenolic compounds to alcohols	14
Chiral LVFFARK enantioselectively inhibits amyloid-β protein fibrillogenesis	14
Electrochemical performance of NiAl-activated cathode for green hydrogen production	14
Theoretical property assessment of hydrocarbon fuels derived from terpenoids	14
Synthesis of aviation fuel by controllable oligomerization of furfuryl alcohol	14
Enhancement of liquid–liquid micromixing performance in curved capillary microreactor by generation of Dean vortices	14
Effects of baffle position in serpentine flow channel on the performance of proton exchange membrane fuel cells	14
Recovery rubidium chloride and cyclic utilization of hexacyanoferrate(II) ion from hexacyanoferrate-internediate solutions via solvent extraction	14
Discharge characteristics of coal and extraction residue from direct coal liquefaction in partial fluidization silo	14
Preparation and performance analysis of non-aqueous absorbents based on alcohol ether organic compounds for CO2 capture	14
Styrene epoxidation catalyzed by polyoxometalate/quaternary ammonium phase transfer catalysts: The effect of cation size and catalyst deactivation mechanism	14
Quantitative research of the liquid film characteristics in upward vertical gas, oil and water flows	14
Effect of geometry ratios on droplet breakup in a T-junction microchannel: A theoretical predictive model	14
Understanding the role of surface Zn species in CO2 hydrogenation to methanol over Cu/ZnO/Al2O3	14
Hydrothermal conversion of fructose to lactic acid and derivatives: Synergies of metal and acid/base catalysts	14
Short review on liquid membrane technology and their applications in biochemical engineering	14
Dual biomass-derived CQDs/Ag co-catalysts synergistically assisted Cu2O for efficient tetracycline hydrochloride photocatalytic degradation: Performance and mechanism insights	14
Optimal design of LOHC-based hydrogen refueling stations by coordinating renewable hydrogen production with fluctuating hydrogen demands	14
Ultrathin polyamide nanofiltration membrane prepared by triazine-based porous organic polymer as interlayer for dye removal	14
Green and low-viscosity deep eutectic solvents for the extraction of quinoline from wash oil: Experimental investigation and molecular dynamics simulation	13
Elucidating the effect of oxides on the zeolite catalyzed alkylation of benzene with 1-dodecene	13
Phase equilibrium data prediction and process optimizationin butadiene extraction process	13
Experimental research on enhanced the microfine oil droplets separation using hydrocyclone coupled with fiber coalescence	13
Molten salt-derived biochar with tunable pore architecture as non-metallic catalysts for acetylene hydrochlorination	13
Ethanol steam reforming over Ni/ZSM-5 nanosheet for hydrogen production	13
Mesoporous titanium-aluminosilicate as an efficient catalyst for selective oxidation of cyclohexene at mild reaction conditions	13
Facile preparation of Fe-Beta zeolite-supported transition metal oxide catalysts and their catalytic performance for the simultaneous removal of NO and soot	13
Enhanced corrosion resistance of epoxy resin coating via addition of CeO2 and benzotriazole	13
WITHDRAWN: Dynamic viscosity prediction for MWCNT-MgO (10%–90%)-SAE40 oil hybrid nano-lubricant using artificial neural network andmulti-dimensional nonlinear least square curve fitting	13
Construction of hydrophobic CuCl@AC–PTFE composites with an enhanced Cu(I) stability for efficient CO adsorption	13
Hydrothermal preparation of CuS2-Cu2O decorated TiO2 for highly efficient activation of peroxymonosulfate to degrade chloroquine phosphate	13
Impact of sugar type on thiophene hydrodesulfurization performance of three-dimensional porous CoMo bulk catalysts prepared via the sugar foaming method	13
Boosting the hydrogen storage performance of magnesium hydride with metal organic framework-derived Cobalt@Nickel oxide bimetallic catalyst	13
A soft sensing method for mechanical properties of hot-rolled strips based on improved co-training	13
Efficient syngas production from medical waste by CO2 thermal plasma gasification	13
Development of a capillary bundle evaporation advanced mathematical modeling for 1,2-propylene glycol–glycerin mixtures in porous media	13
Glycerol steam reforming over hydrothermal synthetic Ni-Ca/attapulgite for green hydrogen generation	13
Alkaline-free oxidation of ethylene glycol into glycolic acid over PdNi/NF in an asymmetric electrolytic cell	13
Two-stage cyclic ammonium sulfate roasting and leaching of extracting vanadium and titanium from vanadium slag	13
High performance photodegradation resistant PVA@TiO2/carboxyl-PES self-healing reactive ultrafiltration membrane	13
Insight into the experiment and extraction mechanism for separating carbazole from anthracene oil with quaternary ammonium-based deep eutectic solvents	13
NO reduction performance of pyrolyzed biomass char: Effects of dechlorination removal pretreatments	13
A core–shell Ni/SiO2@TiO2 catalyst for highly selective one-step synthesis of 2-propylheptanol from n-pentanal	13
Corrigendum to “Controllable synthesis of novel nanoporous manganese oxide catalysts for the direct synthesis of imines from alcohols and amines” [Chin. J. Chem. Eng. 27(10) (2019) 2438–2446]	13
Experimental study on the activation of coal gasification fly ash from industrial CFB gasifiers	13
Towards understanding the mechanism of n-hexane tolerance in Synechocystis sp. PCC 6803	13
Hybrid modelling incorporating reaction and mechanistic data for accelerating the development of isooctanol oxidation	13
Study on the decomposition mechanism of supercritical ethylene during ultra-high pressure polymerization process	13
A potential-responsive ion-pump system based on nickel hexacyanoferrate film for selective extraction of cesium ions	13
The inhibition difference and mechanism research of N2-water mist two-phase medium on CH4, LPG and H2 explosion flame acceleration characteristic	13
Pomelo biochar as an electron acceptor to modify graphitic carbon nitride for boosting visible-light-driven photocatalytic degradation of tetracycline	13
Synergism of highly graphitic N-doped graphene-like carbon and Pt@PtCo core-shell structure for efficient oxygen reduction reaction	13
MnO nanoflower network anchored on lamellar carbon: a high-performance cathode for aqueous zinc-ion batteries	13
Green leaching and predictive model for copper recovery from waste smelting slag with choline chloride-based deep eutectic solvent	12
A strategy for strengthening chaotic mixing of dual shaft eccentric mixers by changing non-Newtonian fluids kinetic energy distribution	12
Enhanced mass transfer in flexible electrodes of open-pore cobalt disulfide nanosheets supported on sulfur-doped carbon fibers for efficient zinc–air batteries	12
A green cross-linking method for the preparation of renewable three-dimensional graphene sponges for efficient adsorption of Congo red dye	12
Dynamic temperature control of dividing wall batch distillation with middle vessel based on neural network soft-sensor and fuzzy control	12
Surface modulation of CeO2 by Nb doping to promote green synthesis of pentamethylene dicarbamate via carbonylation	12
Towards superior permeability and antifouling performance of sulfonated polyethersulfone ultrafiltration membranes modified with sulfopropyl methacrylate functionalized SBA-15	12
Microbubble-based chemical process intensification: A review	12
Innovation and application of dyes with high fixation	12
Effect of swirling addition on the liquid mixing performance in a T-jets mixer	12
Preparation of novel magnetic nanoparticles as draw solutes in forward osmosis desalination	12
Computational fluid dynamics-discrete element method simulation of stirred tank reactor for graphene production	12
Three-dimensional multilevel porous-structured Ni/Ce0.8Zr0.2O2 as efficient and durable catalyst for dry reforming of methane	12
Pickering emulsion transport in skeletal muscle tissue: A dissipative particle dynamics simulation approach	12
Magnetic Fe3O4 nanoparticles supported on carbonized corncob as heterogeneous Fenton catalyst for efficient degradation of methyl orange	12
Corrigendum to “Production of aromatic hydrocarbons by co-cracking of bio-oil and ethanol over Ga2O3/HZSM-5 catalysts” [Chin. J. Chem. Eng. 46 (2022) 126–133]	12
Fe3O4-carbon spheres core–shell supported palladium nanoparticles: A robust and recyclable catalyst for suzuki coupling reaction	12
Nacre-mimetic structural physical encapsulation and Co-Mn bimetallic interaction for stabilizing cobalt active sites	12
Studies on ammonium dinitramide and 3,4-diaminofurazan cocrystal for tuning the hygroscopicity	12
Adaptive multiscale convolutional neural network model for chemical process fault diagnosis	12
Novel thermally coupled extractive distillation process for efficient separation of dimethyl carbonate/methanol/water: Thermodynamic analysis and process intensification	12
Unraveling the methane decomposition mechanism on Fe-Ni-Ca-O composite catalysts: A combined density functional theory and microdynamic study	12
Numerical simulation of circulating fluidization roasting desulfurization of high-sulfur bauxite based on computational particle fluid dynamics method	12
Amine-functionalized mesoporous UiO-66 aerogel for CO2 adsorption	12
Selective separation of vanadium from the high-acidity leaching liquor through chelating extraction by the ketoxime extractant	12
Editorial Board	12
Cycle temporal algorithm-based multivariate statistical methods for fault diagnosis in chemical processes	12
High-resolution mass spectrometry-informed molecular reconstruction of vacuum gas oil	12
In-situ synthesis of mixed-valence manganese oxide@S, P self-codoped carbon@reduced graphene oxide composites by enhanced surface interaction for high-performance all-solid-state supercapacitors	12
Acid gas combustion in the pure oxygen atmosphere for decreasing sulfur dioxide formation under Claus conditions	12