Chinese Journal of Chemical Engineering

Article	Citations
Editorial Board	183
Plant-inspired biomimetic hybrid PVDF membrane co-deposited by tea polyphenols and 3-amino-propyl-triethoxysilane for high-efficiency oil-in-water emulsion separation	175
High efficient removal of HCN over porous CuO/CeO2 micro-nano spheres at lower temperature range	78
In situ investigation of lysozyme adsorption into polyelectrolyte brushes by quartz crystal microbalance with dissipation	69
Study on trifluoromethanesulfonic acid-promoted synthesis of daidzein: Process optimization and reaction mechanism	60
Investigation on the synthesis conditions of poly(4-methyl-1-pentene) hollow fiber membrane with high gas permeability and strong tensile strength	57
Solid–liquid phase equilibria in the aqueous system containing the chlorides of potassium, ammonium, and calcium at 298.2, 323.2, and 348.2 K	55
A general pressure drop model based on liquid holdup of gas–liquid flow in micro-packed beds	55
Lower temperature hydrothermal pretreatment improves the anaerobic digestion performance of spent cow bedding	54
Ultrafine tuning of the pore size in zeolite A for efficient propyne removal from propylene	49
A route for the study on mass transfer enhancement by adding particles in liquid phase	47
Computer generation of detailed reaction networks in hydrocracking of Fischer-Tropsch wax	47
Sulfonation of 1,4-diaminoanthraquinone leuco by chlorosulfonic acid: Kinetics and process intensification	46
Rapid hydrate formation and efficient gas separation based on aqueous solid carrier	44
Comprehensive analysis on the economy and energy demand of pressure-swing distillation and pervaporation for separating waste liquid containing multiple components	42
Study of the reaction mechanism for preparing powdered activated coke with SO2 adsorption capability via one-step rapid activation method under flue gas atmosphere	41
Preparation and evaluation of controllable drug delivery system: A light responsive nanosphere based on β-cyclodextrin/mesoporous silica	40
Highly dispersible cerium-oxide modified Ni/SBA-15 for steam reforming of bio-mass based JP10	40
Fabrication of anti-fouling polyamide nanofiltration membrane by incorporating streptomycin as a novel co-monomer	40
Substrate-Free Spatial Separation Pyrolysis for Uniform Iron/Cobalt/Nickel-Based Nanocatalysts Enabling High-Performance Rechargeable Zinc–Air Batteries	40
Numerical simulation of gas–liquid flow in the bubble column using Wray–Agarwal turbulence model coupled with population balance model	39
Exploring influence of MgO/CaO on crystallization characteristics to understand fluidity of synthetic coal slags	39
Enhancing laccase stability and activity for dyes decolorization using ZIF-8@MWCNT nanocomposite	38
Mechanistic insights into the active intermediates of 2,6-diaminopyridine dinitration	37
A parallel chemical reaction optimization method based on preference-based multi-objective expected improvement	37

Micromixing efficiency and enhancement methods for non-Newtonian fluids in millimeter channel reactors	37
Design, synthesis, and nanoengineered modification of spherical graphene surface by layered double hydroxide (LDH) for removal of As(III) from aqueous solutions	36
Box-Behnken experimental design for optimizing process parameters in carbonate-promoted direct thiophene carboxylation reaction with carbon dioxide	36
Evaluating two stages of silicone-containing arylene resin oxidation via experiment and molecular simulation	35
Influence of CO2 inleakage on the slight-alkalization of generator internal cooling water	34
CFD investigation in the temperature effect on coal catalytic hydrogasification in the pressurized bubbling fluidized bed	34
Molecular dynamics simulation study on π-π stacking of Gemini surfactants in oil/water systems	33
Investigation of reaction pathways and kinetics in the gas-phase noncatalytic oxidation of hexafluoropropylene	33
Application of different fiber structures and arrangements by electrospinning in triboelectric nanogenerators	33
Dual responsive block copolymer coated hollow mesoporous silica nanoparticles for glucose-mediated transcutaneous drug delivery	33
MXene-supported Dense Cobalt Phosphide Nanoparticles as Cathode for Enhanced Cycle Stability in Lithium-sulfur Batteries	32
Synthesis of magnetically separable and recyclable MnFe2O4@SiO2@NH2 nanocomposite coupled-acylated MWCNTS with enhanced photocatalytic performance under visible-light irradiation	32
Catalytic oxidation of methane for methanol production over copper sepiolite: Effect of noble metals	31
A theoretical insight about co-pyrolysis reaction of natural gas and coal	30
Current advances in distillation processes for fermentative acetone-butanol-ethanol purification	30
Catalytic adsorptive desulfurization of mercaptan, sulfide and disulfide using bifunctional Ti-based adsorbent for ultra-clean oil	30
Physically-consistent-WGAN based small sample fault diagnosis for industrial processes	29
Alkylation of benzene and 1-dodecene over cerium-silicate pillared MWW zeolite	29
Catalytic mechanism of manganese ions and visible light on chalcopyrite bioleaching in the presence of Acidithiobacillus ferrooxidans	29
The phase behaviors of W/O microemulsion with Cu(Ac)2 -Zn(Ac)2 solution as aqueous phase	29
Decontamination of Cr(VI) from water using sewage sludge-derived biochar: Role of environmentally persistent free radicals	28
Intelligent prediction of ionic liquids and deep eutectic solvents by machine learning	28
Preparation of PrFe Co1–O3/Mt catalyst and study on degradation of 2-hydroxybenzoic acid wastewater by catalytic wet peroxide oxidation	28
Systematic investigation of SO2 adsorption and desorption by porous powdered activated coke: Interaction between adsorption temperature and desorption energy consumption	28
Covalent immobilization and characterization of Rhizopus oryzae lipase on core-shell cobalt ferrite nanoparticles for biodiesel production	28
A panoramic view of Li7P3S11 solid electrolytes synthesis, structural aspects and practical challenges for all-solid-state lithium batteries	27
Fabrication of highly dispersed carbon doped Cu-based oxides as superior selective catalytic oxidation of ammonia catalysts via employing citric acid-modified carbon nanotubes doping CuAl-LDHs	27
Prediction of NO concentration using modular long short-term memory neural network for municipal solid waste incineration	27
Direct atomic-level insight into oxygen reduction reaction on size-dependent Pt-based electrocatalysts from density functional theory calculations	27
Temperature-controlled flexible metal–organic frameworks for propylene/propane separation	27
Metal oxide particle electrodes for degradation of high concentration phenol wastewater via electrocatalytic advanced oxidation	27
Effect of different treatments on electrokinetic remediation of Zn, Pb and Cd from a contaminated calcareous soil	27
CO2 capture by double metal modified CaO-based sorbents from pyrolysis gases	26
The effects of amino groups and open metal sites of MOFs on polymer-based electrolytes for all-solid-state lithium metal batteries	26
Advances in the preparation process and mechanism study of high-purity anhydrous magnesium chloride from magnesium chloride hexahydrate	26
Recovery of lithium using H4Mn3.5Ti1.5O12/reduced graphene oxide/polyacrylamide composite hydrogel from brine by Ads-ESIX process	26
Continuous monitoring of residual water content in boiling water-hydrocarbon emulsions during thermomechanical dehydration	26
The critical role of Zr in controlling the activity of Pd/Beta on the hydrogenation of phenol to cyclohexanone	25
Comparative analysis on gas–solid drag models in MFIX-DEM simulations of bubbling fluidized bed	25
Process monitoring of the Au-S bond conversion in acetylene hydrochlorination	24
The Joule–Thomson effect of (CO2 + H2) binary system relevant to gas switching reforming with carbon capture and storage (CCS)	24
Experimental study on secondary air mixing along the bed height in a circulating fluidized bed with a multitracer-gas method	24
Identification of a sensor histidine kinase (BfcK) controlling biofilm formation in Clostridium acetobutylicum	24
Process fault root cause diagnosis through state evolution mapping based on temporal unit shapelets	24
Study of intermolecular interactions in binary mixtures of methyl acrylate with benzene and methyl substituted benzenes at different temperatures: An experimental and theoretical approach	24
Durable self-cleaning superhydrophobic composite coatings based on fluorine-modified organic polysilazane and SiO2 particles prepared by facile spraying technique	24
Closed-loop scheduling optimization strategy based on particle swarm optimization with niche technology and soft sensor method of attributes-applied to gasoline blending process	24
Machine-learning-assisted high-throughput computational screening of the n-hexane cracking initiator	23
Separation of a C3H6/C2H4 mixture using Pebax® 2533/PEG600 blend membranes	23
Technology for recycling and regenerating graphite from spent lithium-ion batteries	23

The establishment of Boron nitride@sodium alginate foam/polyethyleneglycol composite phase change materials with high thermal conductivity, shape stability, and reusability	23
Cascade equilibrium stage relaxation method by introducing equilibrium efficiency parameter	23
Separation of salidroside from the fermentation broth of engineered Escherichia coli using macroporous adsorbent resins	23
Separation of fuel additives based on mechanism analysis and thermodynamic phase behavior	23
Editorial Board	23
Experimental investigation of dynamic mass transfer during droplet formation using micro-LIF in a coaxial microchannel	23
Effect of pitched short blades on the flow characteristics in a stirred tank with long-short blades impeller	23
Editorial for special issue on Carbon-neutrality Chemical Engineering	23
Impact of CO2 as an oxidant on the decarburization and chromium retention and an approach for CO2 recycling	23
Recent progress on nanomaterial-based electrochemical dissolved oxygen sensors	22
Multivariable identification of membrane fouling based on compacted cascade neural network	22
Separation and recovery of V/W/Na from waste SCR catalyst leaching solution using membrane electrolysis – Ion morphology pretreatment solvent extraction-stripping method	22
Enhanced ortho-selective t–butylation of phenol over sulfonic acid functionalized mesopore MTW zeolites	22
Research progress on catalysts for organic sulfur hydrolysis: Review of activity and stability	22
Optimization of catalyst pellet structures and operation conditions for CO methanation	21
A novel strategy of lithium recycling from spent lithium-ion batteries using imidazolium ionic liquid	21
Enhanced electrocatalytic activities in TiO2-sulfur nanoparticles decorated graphene nanocomposite electrode for detecting formaldehyde compound	21
Study on cavern evolution and performance of three mixers in agitation of yield-pseudoplastic fluids	21
Three-dimensional porous bimetallic metal–organic framework/gelatin aerogels: A readily recyclable peroxymonosulfate activator for efficient and continuous organic dye removal	21
Coalescence dynamics of two droplets of different viscosities in T-junction microchannel with a funnel-typed expansion chamber	21
Improving CO2 solubility in a hybrid sorbent of 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide/mesoporous titanium dioxide/water with confinement effect	21
Viscosity reduction of tapioca starch by incorporating with molasses hydrocolloids	21
CFD simulation of flow and mixing characteristics in a stirred tank agitated by improved disc turbines	21
Numerical and experimental study on the particle erosion and gas–particle hydrodynamics in an integral multi-jet swirling spout-fluidized bed	21
Microinterface intensification in hydrogenation and air oxidation processes	21
Enhancement of catalytic and anti-carbon deposition performance of SAPO-34/ZSM-5/quartz films in MTA reaction by Si/Al ratio regulation	21
Study on an improved rotating microchannel separator in the intensification for demulsification and separation process	20
Preparation and properties of antibacterial PVA@MCC composite membrane assisted by ionic liquids and DMSO	20
Corrigendum to “Conjugation of a zwitterionic polymer with dimethyl chains to lipase significantly increases the enzyme activity and stability” [Chinese J. Chem. Eng. 47 (2022) 48–53]	20
Two dimensional MoS2 finding its way towards constructing high-performance alkaline recovery membranes	20
Photocatalytic ozonation-based degradation of phenol by ZnO–TiO2 nanocomposites in spinning disk reactor	20
Highly permeable reverse osmosis membranes incorporated with hydrophilic polymers of intrinsic microporosity via interfacial polymerization	20
Measurement and model of density, viscosity, and hydrogen sulfide solubility in ferric chloride/trioctylmethylammonium chloride ionic liquid	20
Removal of rubidium from brine by an integrated film of sulfonated polysulfone/graphene/potassium copper ferricyanide	20
A thermodynamic view on the in-situ carbon dioxide reduction by biomass-derived hydrogen during calcium carbonate decomposition	20
Editorial Board	19
UV/Vis-based process analytical technology to improve monoclonal antibody and host cell protein separation	19
Model-based risk assessment on dynamic control of twin-column continuous capture under feedstock variations	19
Fabrication and characterization of hierarchical porous Ni2+ doped hydroxyapatite microspheres and their enhanced protein adsorption capacity	19
Festschrift in honor of Professor K.T. Yu (Guocong Yu) and the 40th anniversary of the CJChE	19
Engineering the efficient three-dimension hollow cubic carbon from vacuum residuum with enhanced mass transfer ability towards H2O2 production	19
Configuring topologically optimum vapor recompressed dividing-wall distillation columns to maximize operating efficiency	19
Editorial Board	19
Flower-like tin oxide membranes with robust three-dimensional channels for efficient removal of iron ions from hydrogen peroxide	19
Experimental study on reactivity and inorganic component transformation of activated fuels in a fluidized bed	19
Modified g-C3N4 derived from ionic liquid and urea for promoting visible-light photodegradation of organic pollutants	19
Effects of tube cross-sectional shapes on flow pattern, liquid film and heat transfer of n-pentane across tube bundles	19
A pillared-layer metal–organic framework for efficient separation of C3H8/C2H6/CH4 in natural gas	19
Metal–organic-framework-derived copper-based catalyst for multicomponent C–S coupling reaction	18
Wear resistance performance of high entropy alloy–ceramic coating composites synthesized via a novel combined process	18
Polyoxymethylene dimethyl ethers synthesis from methanol and formaldehyde solution over one-pot synthesized spherical mesoporous sulfated zirconia	18
Synthesis of waterborne polyurethane–humic acid cross-linked biomass porous materials for the adsorption of methylene blue	18
Laser-enhanced high-magnification telecentric imaging system for multiphase flow monitoring in membrane fouling	18
Efficient adsorption separation of methane from C2–C3 hydrocarbons in a Co(II)-nodes metal–organic framework	18
Polygonal mesopores microflower catalysts for the catalytic oxidation of 2-nitro-4-methylsulfonyltoluene to 2-nitro-4-methylsulfonylbenzoic acid in a continuous-flow microreactor	18
Fabrication of adsorbents with enhanced CuI stability: Creating a superhydrophobic microenvironment through grafting octadecylamine	18
Occurrence, characteristics and removal of microplastics in wastewater treatment plants with different treatment processes	18
Selective hydrogenation of dimethyl toluene-2,4-dicarbamate over supported Rh-based catalysts: Effect of support properties	18
Simultaneous removal of sulfur dioxide and nitrogen oxide from flue gas by phosphorus sludge: The performance and absorption mechanism	18
Synthesis and mechanism analysis of a new oil soluble viscosity reducer for flow improvement of Chenping heavy oil	18
Thermodynamics insights into the gas-phase synthesis of glycolide from methyl glycolate	18
Modeling and analysis of air combustion and steam regeneration in methanol to olefins processes	18
Properties evolutions during carbonization of carbon foam using lignin as sole precursor	17
Research and development of advanced structured packing in a rotating packed bed	17
Shaping of metal–organic frameworks through a calcium alginate method towards ethylene/ethane separation	17
Filtration performance and modeling of granular bed for dust removal from coal pyrolytic vapors	17
Modeling solubility of oxaprozin and irbesartan in biorelevant complex solutions based on a combination of pH-dependent and micellar solubilization models	17
Two-tier control structure design methodology applied to heat exchanger networks	17
Phenylboronic acid functionalized polyacrylonitrile fiber for efficient and green synthesis of bis(indolyl)methane derivatives	17
A data-driven model of drop size prediction based on artificial neural networks using small-scale data sets	17
Preparation and characterization of high performance super activated carbon based on coupled coal/sargassum precursors	17
Decoupling combustion of coal briquettes and coal-biomass blends in a pilot-scale test facility for novel grate boilers	17
Nitrogen and phosphorus co-doped activated carbon induces high density Cu+ active center for acetylene hydrochlorination	17
Rapid velocity reduction and drift potential assessment of off-nozzle pesticide droplets	17
Multi-objective optimization of wastewater treatment using electrocoagulation	17
Thermal aging and pyrolysis behavior of hyperbranched polymers grafted carbon fibers reinforced phthalonitrile/cyanate ester blend composites	17
Enhanced photocatalytic activity of methylene blue using heterojunction Ag@TiO2 nanocomposite: Mechanistic and optimization study	17
A Data-Driven Identification Method for Reaction Rate Constant and Diffusion Coefficient in the P2D Model	17
Recent advances in preparation of metallic superhydrophobic surface by chemical etching and its applications	17
Mechanism analysis and simulation of methyl methacrylate production coupled chemical looping gasification system	17

Electrochemical performance of NiAl-activated cathode for green hydrogen production	16
Charged modified tight ceramic ultrafiltration membranes for treatment of cationic dye wastewater	16
Solid − liquid phase diagram of the KNO3 - Ca(NO3)2 - Mg(NO3)2 - H2O system at 313.15 K	16
Styrene epoxidation catalyzed by polyoxometalate/quaternary ammonium phase transfer catalysts: The effect of cation size and catalyst deactivation mechanism	16
A highly hydrothermal stable copper-based catalyst for catalytic wet air oxidation of m-cresol in coal chemical wastewater	16
Modulating titanium dioxide electron transport layer by self-doping for high-efficiency carbon-based perovskite solar cells	16
Preparation and modification of membranes for extracorporeal membrane oxygenator: A review	16
Reaction process optimization based on interpretable machine learning and metaheuristic optimization algorithms	16
Numerical study on the hydrodynamics behavior of a central insert microchannel	16
Engineering stable multi-component pH responsive nanomedicine for enhanced photothermal/photodynamic therapy	16
Computational study of bubble coalescence/break-up behaviors and bubble size distribution in a 3-D pressurized bubbling gas-solid fluidized bed of Geldart A particles	16
Recent advances in cardiovascular stent for treatment of in-stent restenosis: Mechanisms and strategies	16
Removal of deposited metal particles on a horizontal surface by vertical submerged impinging jets	16
The feasibility for natural graphite to replace artificial graphite in organic electrolyte with different film-forming additives	16
Thixotropic composite hydrogels based on agarose and inorganic hybrid gellants	16
Effects of baffle position in serpentine flow channel on the performance of proton exchange membrane fuel cells	16
Measurement and calculation of solid–liquid equilibria of two quinary systems LiBr–NaBr–MgBr2–SrBr2–H2O and LiBr–KBr–MgBr2–SrBr2–H2O at 298.15 K	16
Short review on liquid membrane technology and their applications in biochemical engineering	16
Effects of ionic liquids on the vapor–liquid equilibriumof 1,3,5-trioxane–water system at 101.3 kPa	15
CO2 mineralization of carbide slag for the production of light calcium carbonates	15
Oil-in-water nanoemulsions loaded with lycopene extracts encapsulated by spray drying: Formulation, characterization and optimization	15
Highly efficient visible/near-infrared light photocatalytic degradation of antibiotic wastewater over 3D yolk-shell ZnFe2O4 supported 0D carbon dots with up-conversion property	15
Influence of mineral species on oil–soil interfacial interaction in petroleum-contaminated soils	15
An integrated technology for the absorption and utilization of CO2 in alkanolamine solution for the preparation of BaCO3 in a high-gravity environment	15
Enhanced selective hydrogenation of glycolaldehyde to ethylene glycol over Cu0-Cu+ sites	15
Hydrothermal conversion of fructose to lactic acid and derivatives: Synergies of metal and acid/base catalysts	15
Magnetic graphene oxide-anchored Ni/Cu nanoparticles with a Cu-rich surface for transfer hydrogenation of nitroaromatics	15
Photoacoustic detection of follicular thyroid carcinoma using targeted Nano-Au-Tripods	15
Enhancement of liquid–liquid micromixing performance in curved capillary microreactor by generation of Dean vortices	15
Ultrathin polyamide nanofiltration membrane prepared by triazine-based porous organic polymer as interlayer for dye removal	15
Simulation and experiment of six-bed PSA process for air separation with rotating distribution valve	15
Performance of a synthetic resin for lithium adsorption in waste liquid of extracting aluminum from fly-ash	15
Dual biomass-derived CQDs/Ag co-catalysts synergistically assisted Cu2O for efficient tetracycline hydrochloride photocatalytic degradation:Performance and mechanism insights	15
Microwave-assisted dehydration of strontium hydroxide octahydrate: Experimental study and kinetic modeling analysis	15
Decorating MXene with tiny ZIF-8 nanoparticles: An effective approach to construct composites for water pollutant removal	15
Effect of geometry ratios on droplet breakup in a T-junction microchannel: A theoretical predictive model	15
Integrated vacuum pressure swing adsorption and Rectisol process for CO2 capture from underground coal gasification syngas	15
Boron-modified ZSM-5 coated on honeycomb monolith surface for selective production of propylene from methanol	15
Hollow ZIF-67-derived Co@N-doped carbon nanotubes boosting the hydrogenation of phenolic compounds to alcohols	15
Fabrication of super-elastic graphene aerogels by ambient pressure drying and application to adsorption of oils	15
Rheological study of methane gas hydrates in the presence of micron-sized sand particles	15
Progress in research of process intensification of spouted beds: A comprehensive review	14
Fe3O4-carbon spheres core–shell supported palladium nanoparticles: A robust and recyclable catalyst for suzuki coupling reaction	14
Green and low-viscosity deep eutectic solvents for the extraction of quinoline from wash oil: Experimental investigation and molecular dynamics simulation	14
Impact of sugar type on thiophene hydrodesulfurization performance of three-dimensional porous CoMo bulk catalysts prepared via the sugar foaming method	14
Hybrid modelling incorporating reaction and mechanistic data for accelerating the development of isooctanol oxidation	14
Rh single atoms embedded in CeO2 nanostructure boost CO2 hydrogenation to HCOOH	14
Discharge characteristics of coal and extraction residue from direct coal liquefaction in partial fluidization silo	14
Towards superior permeability and antifouling performance of sulfonated polyethersulfone ultrafiltration membranes modified with sulfopropyl methacrylate functionalized SBA-15	14
Application of pulsed chemical vapor deposition on the SiO2-coated TiO2 production within a rotary reactor at room temperature	14
Effect of swirling addition on the liquid mixing performance in a T-jets mixer	14
High performance photodegradation resistant PVA@TiO2/carboxyl-PES self-healing reactive ultrafiltration membrane	14
Chiral LVFFARK enantioselectively inhibits amyloid-β protein fibrillogenesis	14
Towards understanding the mechanism of n-hexane tolerance in Synechocystis sp. PCC 6803	14
WITHDRAWN: Dynamic viscosity prediction for MWCNT-MgO (10%–90%)-SAE40 oil hybrid nano-lubricant using artificial neural network andmulti-dimensional nonlinear least square curve fitting	14
Elucidating the effect of oxides on the zeolite catalyzed alkylation of benzene with 1-dodecene	14
Green leaching and predictive model for copper recovery from waste smelting slag with choline chloride-based deep eutectic solvent	14
Studies on ammonium dinitramide and 3,4-diaminofurazan cocrystal for tuning the hygroscopicity	14
Dynamic temperature control of dividing wall batch distillation with middle vessel based on neural network soft-sensor and fuzzy control	14
Enhanced corrosion resistance of epoxy resin coating via addition of CeO2 and benzotriazole	14
Corrigendum to “Controllable synthesis of novel nanoporous manganese oxide catalysts for the direct synthesis of imines from alcohols and amines” [Chin. J. Chem. Eng. 27(10) (2019) 2438–2446]	14
Syngas production from chemical looping reforming of ethanol over iron-based oxygen carriers: Theoretical analysis and experimental investigation	14
Pickering emulsion transport in skeletal muscle tissue: A dissipative particle dynamics simulation approach	14
An internal circulation iron–carbon micro-electrolysis reactor for aniline wastewater treatment: Parameter optimization, degradation pathways and mechanism	14
Determination of interfacial tension and viscosity under dripping flow in a step T-junction microdevice	14
Construction of hydrophobic CuCl@AC–PTFE composites with an enhanced Cu(I) stability for efficient CO adsorption	14
Facile preparation of Fe-Beta zeolite-supported transition metal oxide catalysts and their catalytic performance for the simultaneous removal of NO and soot	14
Experimental study on the activation of coal gasification fly ash from industrial CFB gasifiers	14
Boosting the hydrogen storage performance of magnesium hydride with metal organic framework-derived Cobalt@Nickel oxide bimetallic catalyst	14
A potential-responsive ion-pump system based on nickel hexacyanoferrate film for selective extraction of cesium ions	14
Mesoporous titanium-aluminosilicate as an efficient catalyst for selective oxidation of cyclohexene at mild reaction conditions	14
Quantitative research of the liquid film characteristics in upward vertical gas, oil and water flows	14
Glutamic acid-assisted hydrothermal recrystallization to configure bamboo-like carbon nanotubes for improved triiodide reduction	14
A core–shell Ni/SiO2@TiO2 catalyst for highly selective one-step synthesis of 2-propylheptanol from n-pentanal	14
The inhibition difference and mechanism research of N2-water mist two-phase medium on CH4, LPG and H2 explosion flame acceleration characteristic	13
Development of a capillary bundle evaporation advanced mathematical modeling for 1,2-propylene glycol–glycerin mixtures in porous media	13
Three-dimensionally oriented organization of hexagonal MIL-96 microplates toward superior film microstructure	13
Preparation of novel magnetic nanoparticles as draw solutes in forward osmosis desalination	13
Amine-functionalized mesoporous UiO-66 aerogel for CO2 adsorption	13
Innovation and application of dyes with high fixation	13
Phase equilibrium data prediction and process optimizationin butadiene extraction process	13
Glycerol steam reforming over hydrothermal synthetic Ni-Ca/attapulgite for green hydrogen generation	13
Pomelo biochar as an electron acceptor to modify graphitic carbon nitride for boosting visible-light-driven photocatalytic degradation of tetracycline	13
Corrigendum to “Production of aromatic hydrocarbons by co-cracking of bio-oil and ethanol over Ga2O3/HZSM-5 catalysts” [Chin. J. Chem. Eng. 46 (2022) 126–133]	13
A green cross-linking method for the preparation of renewable three-dimensional graphene sponges for efficient adsorption of Congo red dye	13
Alkaline-free oxidation of ethylene glycol into glycolic acid over PdNi/NF in an asymmetric electrolytic cell	13
Magnetic Fe3O4 nanoparticles supported on carbonized corncob as heterogeneous Fenton catalyst for efficient degradation of methyl orange	13
In-situ synthesis of mixed-valence manganese oxide@S, P self-codoped carbon@reduced graphene oxide composites by enhanced surface interaction for high-performance all-solid-state supercapacitors	13
Two-stage cyclic ammonium sulfate roasting and leaching of extracting vanadium and titanium from vanadium slag	13
Efficient syngas production from medical waste by CO2 thermal plasma gasification	13
Insight into the experiment and extraction mechanism for separating carbazole from anthracene oil with quaternary ammonium-based deep eutectic solvents	13
Editorial Board	13
Enhancing the activity of MoS2/SiO2-Al2O3 bifunctional catalysts for suspended-bed hydrocracking of heavy oils by doping with Zr atoms	13
Adaptive multiscale convolutional neural network model for chemical process fault diagnosis	13
Optimization of circulating cooling water systems based on chance constrained programming	13