European Journal of Mechanics A-Solids

Article	Citations
Spatial and temporal averaging in the homogenisation of the elastodynamic response of periodic laminates	235
Innovative multiphysics approach for designing high-performance thermo-responsive shape memory polymer microvalve	114
Efficient layerwise multiphysics spectral element model for delaminated composite strips with PWAS transducers	113
A symplectic elasticity approach for precise fracture analysis of V-notched visco-piezoelectric/elastic bimaterials	95
Corrigendum to “Hyperelastic nature of the Hoek–Brown criterion” [Europe. J. Mech. A/Solid. 115 (2026) 105782]	95
Effect of post-treatments on the microstructural and fatigue properties of Ti6Al4V-ELI alloy fabricated by laser powder bed fusion method	91
A new method for solving parameter mutation analysis in periodic structure bandgap calculation	84
Experimental and numerical study of topological valley transport in curved chiral honeycomb-like metastructures	74
Influence of the porosity and auxeticity of matrices and interfacial integrity on the performance of KNN-based piezocomposites	71
A multi-material Proportional Topology Optimization approach for compliant mechanism problems	65
Designing the futuristic dielectric elastomer minimum energy structures using artificial neural networks (ANN)	58
Revisiting the Love hypothesis for introducing dispersion of longitudinal waves in elastic rods	57
A nonlinear rigid-flexible piezoelectric beam model for large in-plane motions	57
Atomistic investigation of interface adherence mechanism of structural indenter nanocoining single crystal aluminum	54
Nonlinear deformation analysis of magneto-electro-elastic nanobeams resting on elastic foundation by using nonlocal modified couple stress theory	53
Vibroacoustic analysis of sandwich and honeycomb panels using an efficient FEM approach	53
A hybrid piezoelectric-triboelectric generator with inertial amplification for vibration energy harvesting	52
Tuning negative stiffness mechanical metamaterial's snap-through behavior with a series-connected spring	52
Enhancing bending and compression resistance of additively manufactured bio-inspired architected structures	51
Dynamic response of novel sandwich structures with 3D sinusoid-parallel-hybrid honeycomb auxetic cores: The cores based on negative Poisson's ratio of elastic jump	49
Electric–Mechanical coupling analysis of two-dimensional piezoelectric heterogeneous materials in flexible electric devices with extended multiscale isogeometric analysis	48
Geometric nonlinear buckling behaviour of randomly distributed carbon nanotube and fibre reinforced hybrid stiffened composite plates: Effect of CNT agglomeration	47
Damping analysis of a transversely isotropic piezothermoelastic nanobeam resonator based on the MGT thermoelasticity	45
Thermally nonlinear thermoelasticity of a one-dimensional finite domain based on the finite strain concept	43
Static and dynamic mechanical characteristics of honeycomb non-pneumatic tire under structural damage condition	43

Interfacial behavior of thin film bonded to plastically graded substrate under tensile loading	43
Solute strengthening of prism edge dislocations in Mg alloys	41
Perturbation of the elastic and thermoelectric fields caused by a rigid inclusion in a thermo-electro-elastic full plane	41
Editorial Board	41
A novel methodology for affecting the strain paths during hydraulic bulge tests by means of laser heat treatments	41
Thermo-magnetic loading effects on high-frequency dynamic behaviour of magnetic shape memory alloys	41
Forward-backward internal resonances in asymmetrical rotors under electromagnetic and gravitational fields	41
Numerical and experimental investigation of residual stresses during the induction hardening of 42CrMo4 steel	39
Crystal crack dislocation model and micro-crack nucleation criterion in the hydrogen environment	38
Nonlinear Stress dependent Resonant Studies on Press-fit ME Composites	38
Ultimate equilibrium of a rigid cone enclosed in a hyperelastic membrane	38
Vibration attenuation of metamaterial dual-beam with simultaneous acoustic black hole and local resonator	37
Size-dependent and nonlinear magneto-mechanical coupling characteristics analysis for extensional vibration of composite multiferroic piezoelectric semiconductor nanoharvester with surface effect	36
A numerical framework based on CDM for complete fatigue life prediction of bi-directional FRP composites	35
Experimental and numerical study on the tensile ductility of an aluminium alloy with heat-affected zones	35
Heating process analysis for microplate subjected to moving laser pulse source	35
Bulging of inflated membranes made of fiber reinforced materials with different natural configurations	35
Analytical and experimental study of a novel slip-friction connector for structural mechanics	34
Size effects in adhesive contacts of viscoelastic media	34
High-frequency mechanical impedance of rubber mounts: Experimental characterization and resonance mechanisms	34
Static bending and buckling of FG sandwich nanobeams with auxetic honeycomb core	34
Vibration analysis of fixed-fixed prestressed beam using Tau and experimental methods	34
Damage preserving transformation for materials with microstructure	34
An integrated fabrication process for reducing thermal distortion of the CFRP reflector surface	34
Nonlinear dynamic and vibration characteristics of metamaterial shallow arches	34
Elastic-plastic analysis with pre-integrated beam finite element based on state diagrams: Elastic-perfectly plastic flow	34
A strain gradient plasticity model to investigate diffusion and dynamic segregation of hydrogen	33
Energy harvesting from vibrations of a beam under mass passage by arc-shaped auxetic cantilever beams	33
Hydrogen-assisted fatigue crack growth of pipeline steels under gaseous hydrogen pressure: A unified anisotropic phase-field model	33
An adaptive contact model involving friction based on peridynamics	32
The influence of surface elasticity on shear wave propagation in a cylindrical layer structure with an imperfect interface	32
Accuracy of hygro-expansive curl predictions for paper sheets based on homogenised 2D and 3D network representations	31
FG layers' effect on nonlinear free vibrations of sandwich auxetic cylinders	31
Broadband piezoelectric energy harvesting microgyroscopes: Design and nonlinear analysis	31
Buckling and post-buckling analysis of double-layer magnetoelectric nano-plate strips considering piezo-flexoelectric and piezo-flexomagnetic effects	31
Shear Waves Induced Vibration in a Size-dependent Loosely-bonded Viscoelastic–Flexoelectric Material Structure Subjected to Fractional Derivative	31
Tunable second-order elastic topological insulator and multi-dimensional rainbow trapping in ferroelectric phononic crystal plates	31
Elastodynamic analysis of rotating solids by novel nodal position finite element method	31
Modelling and experimental investigation of capsule-tumour contact for early bowel cancer detection	30
A diffuse interface model for electro-chemo-mechanical systems	29
Symplectic stiffness method for the buckling analysis of hierarchical and chiral cellular honeycomb structures	29
Advanced finite element approaches for the 2D analysis of multilayered composite and sandwich beams	29
A thermodynamically consistent wear modeling approach based on damage accumulation	29
Integrated analysis of bandgap optimization regulation and wave propagation mechanism of hexagonal multi-ligament derived structures	28
Edge effects in adhesive and non-adhesive indentation: Experimental and numerical insights	28
A structural additive optimization method and its application in vibration reduction of helicopter rotor systems	28
Characterization of geometrically necessary dislocation and deformation behavior analysis during creep of P91 steel	28
Hysteresis characteristics of entangled porous metallic pseudo-rubber under complex topological structures and thermomechanical coupling effects	28
A finite-strain chemo-electro-mechanical model for gel polymer electrolytes with dynamic ion exchange between fluid and polymer phases	28
Discrete defect plasticity and implications for dissipation	27

A dynamic description of material brittle failure using a hybrid phase-field model enhanced by adaptive isogeometric analysis	27
A model for rubber-like materials with three parameters obtained from a tensile test	27
Stabilized state-based peridynamics for elasticity emanating from constrained Lagrangian	27
A comparison of finite strain viscoelastic models based on the multiplicative decomposition	27
Editorial Board	26
A multiscale finite element analysis model for predicting the effect of micro-aeration on the fragmentation of chocolate during the first bite	26
Nonlinear combined resonance of magneto-electro-elastic plates	26
Multi-scale friction coefficient: From roughness to system computation using deep learning	26
Mechanical properties, microstructure evolution, and strengthening mechanism of Al-Mg-Si alloy welded joints using double-sided friction stir welding	26
A crystal plasticity based direct method and its application in predicting the shakedown limit of an additively manufactured AlSi10Mg material	26
3-D finite element simulations of indentation on BaTiO3 single crystal using phase-field based constitutive theory	25
Crack morphology effects on post-fracture tensile behavior of ionomer-laminated glass	25
Towards the exploration of self-starting single-solve integration algorithms with third-order accuracy for nonlinear dynamics	25
Mitigation of vertical vibrations in coupled meta-rods through internal interactions and boundary constraint	25
Change of microstructure and mechanical state in nano-sized wiredrawing: Molecular dynamics simulation of pure magnesium	25
Modelling of anisotropic high-cycle fatigue of metals	24
A physics-based crystal plasticity model for metallic material with highly pressurized bubbles	24
Free vibration and stochastic dynamic response of functionally graded graphene platelet-reinforced composite cabin assemblages	24
Analyzing deformations in fiber-reinforced soft membranes undergoing axisymmetric inflation: Continuum model and experimental validation	24
A scaled boundary finite element formulation for solving plane-strain viscoelastic problems	24
A thermodynamic framework for ductile phase-field fracture and gradient-enhanced crystal plasticity	24
Thermal buckling of organic nanobeams resting on viscous elastic foundation	24
Mechanistic insights into heterogeneous interface-driven deformation patterns and strengthening mechanisms in harmonic-structured CoCrFeMnNi high-entropy alloys	23
A semi-analytical method for determining homogenized relaxation times and moduli in Prony series of a heterogeneous viscoelastic material	23
Wave isogeometric analysis based on reduced model for phononic crystals	23
A unified Mori-Tanaka/finite element approach for investigating piezoelectric ellipsoidal particle-reinforced composite energy harvesters with various configurations	23
Dynamic crack analysis in anisotropic media under wave-like thermal loading	23
Mechanical behaviour of rigid polyurethane foam under combined cutting and compression loads	23
In-plane characteristics of a multi-arc re-entrant auxetic honeycomb with enhanced negative Poisson's ratio effect and energy absorption	22
Experiment and simulation of high-temperature dynamics and flutter for composite cylindrical shells under supersonic conditions	22
Experimental and theoretical investigations of fiber laying angle, graphene, and temperature effects on vibrational behaviors and nonlinear flutter in ternary graphene and carbon fiber reinforced comp	22
A novel multi-resonator honeycomb metamaterial with enhanced impact mitigation	22
Nonlinear oscillations and chaotic behavior of sandwich cylindrical shells with auxetic core and FG face sheets	22
Numerical estimation via remeshing and analytical modeling of nonlinear elastic composites comprising a large volume fraction of randomly distributed spherical particles or voids	22
Atomistic study of phase transformation and plastic behaviors of gradient nanocrystalline NiTi shape memory alloy	22
Stochastic aspects of crack deflection and crack path prediction in short fiber reinforced polymer matrix composites	22
Energy absorption of a novel auxetic structure reinforced by embedding tubes	22
Theoretical model of the temperature-dependent ultimate tensile strength from the viewpoint of dislocation kinetics approach for FCC metals	22
Experimental study on macro-slipping in composite single-lap bolted joints with metal inserts	22
Coupled thermal stability analysis of piezomagnetic nano-sensors and nano-actuators considering the flexomagnetic effect	22
Finite element analysis regarding folding behaviour of different crashbox versions	22
Editorial Board	21
Editorial Board	21
Vibration characteristic analysis of flexible rotor-bearing system subjected to external combined loads	21
Vibration isolator using pneumatic artificial muscle: theoretical modeling and experimental verification	21
Editorial Board	21
Emergence of a localized buckled configuration for a beam on an elastic foundation	21
Comparative analysis of beam models for vertical rail vibrations under dynamic forces	21
A new explicit analytical method of equivalent plastic zone area of crack tip incorporating constraint effects	21
Preface of the special issue: The joy of mechanics	21
C0	21
Methodology for the thermoelastic stress analysis of complex biomimetic structures: An alligator mandible case study	21
An efficient dynamics frame of flexible C/SiC composite blisk with FSI for vibration response analysis	20
Effect of ratcheting on cyclic hardening in a low-carbon steel under relatively large strain conditions: Experiments and simulation	20
Editorial Board	20
Experimental characterization and modeling of the intrinsic softening response of ultrafine grained SUS301 stainless steel with ultrahigh yield strength and large Lüders deformation	20
Exact closed-form solutions for behavior investigation of heterogeneous piezo-magneto-elastic discs under magneto-electro-hygro-thermo-mechanical loads	20
Failure of topologically interlocked structures — a Level-Set-DEM approach	20
Crack tip enhanced phase-field model for crack evolution in crystalline Ti6Al from concurrent crystal plasticity FE-molecular dynamics simulations	19
A FFT-based numerical scheme for the transient conductivity of heterogeneous materials with non-periodic boundary conditions	19
Development of multi aluminium foam-filled crash box systems to improve crashworthiness performance of road Service vehicle	19
Experimental study on the load-area relation of rough surfaces and comparison with theoretical model	19
An incompressible liquid slit between dissimilar anisotropic elastic media	19
Efficient dynamic modeling and real-time control of the planar variable-length hard-magnetic concentric tube robots	19
Meshless finite block method with infinite elements for axisymmetric cracked solid made of functionally graded materials	19
Bridging microstructural evolution to macroscale dissipative behavior in carbon-black-filled elastomers via a physics-informed deep learning framework	19
Harnessing strong and asymmetric adhesion by combining film heterogeneity and substrate morphology	19
In-plane compression characteristics of star-shaped honeycomb with asymmetric cells	19
An innovative bond–based peridynamic model for fracture analysis of orthotropic materials	19
Theoretical and experimental investigations of vibration and damping behaviors of carbon fiber-reinforced composite thin shells with partial bolt looseness constraints	19
A three-dimensional constitutive model for shape memory alloy considering transformation-induced plasticity, two-way shape memory effect, plastic yield and tension-compression asymmetry	19
Influence of heterogeneity on delamination of the solid-electrolyte interphase from silicon anode particles of lithium-ion batteries	19
Nonlinear vibration analysis of nonlocal fractional viscoelastic piezoelectric nanobeams incorporating surface effects	19
Free vibration response of sandwich composites with auxetic chiral core	19
Study on the mechanical properties of magnetron sputtered W-based degradable radiopaque coatings for tiny biodegradable metallic endovascular implants	19
Lateral buckling of the compressed edge of a beam under finite bending	19
Investigating gradient temperature control for enhanced interfacial bonding behavior in material extrusion 3D printing continuous fiber reinforced polymer composites	18
Development of spectral element method for free vibration of axially-loaded functionally-graded beams using the first-order shear deformation theory	18
On the band gap formation in locally-resonant metamaterial thin-walled beams	18
Odd elastic stability of cylindrical shells	18

Prediction of complex modulus for asphalt concrete based on micromechanics considering interaction among randomly oriented aggregates	18
Effect of viscoelasticity on inversion in axial deformation and on the volume of pressurized thin-walled tubes	18
Classification of wear mechanisms in hot forming of aluminium alloy by machine and deep learning approaches	18
Efficient feature extraction for morphologically complex self-assembled porous microstructures using computational homology and unsupervised machine learning	18
Mechanical model analyses of a sheet under unidirectional multiple folding	18
Beam-type structure for low-frequency and broadband underwater sound absorption	18
Flutter-oriented isogeometric optimization of rotating temperature-dependent functionally graded sandwich blades with variable thickness	18
Stress intensity factors for the double-edge cracked Brazilian disc under compression: Theory and experiment	18
Editorial Board	18
Three-dimensional analysis of thermoelastic damping in couple stress-based rectangular plates with nonlocal dual-phase-lag heat conduction	18
On the mechanical role of intra-articular pressurization in damaged human joints	18
Beam formulation and FE framework for architected structures under finite deformations	18
Hierarchical heterogeneous one-dimensional problem in linear viscoelastic media	18
A virtual microstructure generator for 3D stone masonry walls	18
Distributed dislocation problems in wedge shaped domains	18
Buckling of micromorphic Timoshenko columns	17
Bifurcation and stability analysis of static equilibrium configuration of curved pipe conveying fluid	17
Study on data-driven inverse identification of structural parameters for large-scale structures	17
Dynamic analysis and design optimization of hemispherical dielectric elastomer generator for efficient energy harvesting	17
Control of friction: Shortcuts and optimization for the rate- and state-variable equation	17
Generalized multiscale homogenization approach to flexoelectric heterogeneous materials considering strain gradient contributions	17
Hybrid Rayleigh wave along a nonlocal nonlinear metasurface with two-degree-of-freedom spring–mass resonators	17
Design and optimization of bioinspired auxetic structure for biomedical applications	17
An impact contact model for laminates	17
Efficient snap-to-contact computations for van der Waals interacting fibers	17
From frequency-dependent models to frequency-independent enriched continua for mechanical metamaterials	17
Machine learning-assisted parameter identification for constitutive models based on concatenated loading path sequences	17
Dragonfly-like wing structure enabled by a novel skeleton-reinforced neural style transfer assisted topology optimization and additive manufacturing	17
Bending performance and crack propagation in biomimetic honeycomb structures for sustainable lightweight design	17
Nano-sized single-asperity friction behavior: Insight from molecular dynamics simulations	17
Wavenumber domain finite element model for the dynamic analysis of the layered soil with embedded structures	17
Quasi-dynamic modelling and performance analysis of double-row angular contact ball bearing considering overturning moment	17
Coupling Phase Field Crystal and Field Dislocation Mechanics for a consistent description of dislocation structure and elasticity	17
Nonlocal couple stress-based meshless collocation model for nonlinear dynamic performance of microbeam-type piezoelectric energy harvesters	17
Numerical study of novel concept for in-space assembly of ring-like space structures	16
Closed-form analysis of the surface energy effects in Body-centered cubic micro-/nanolattices	16
A new calculation method of in-plane elastic properties analytical model for novel nested honeycomb with negative Poisson's ratio and enhanced Young's modulus	16
Hygrothermal vibration of FG nanobeam via nonlocal unknown integral variables secant-tangential shear deformation coupled theory with temperature-dependent material properties	16
Dimensionally reduced, nonlinear dragged solids: Theory and finite elements for rigid and shell-like bodies	16
Investigation of void distribution effects on ductile failure via unit-cell calculations	16
Semi-analytical modeling and vibration analysis for U-shaped, Z-shaped and regular spatial pipelines supported by multiple clamps	16
Analytical elasticity solution for accurate prediction of localized stresses in laminated composites under patch loading	16
Development of a two-dimensional plate theory for sandwich structures with piezoelectric and saturated ferromagnetoelastic layers	16
Transverse surface wave in non-planar layered nearly incompressible elastic structure having imperfect contact	16
Multiscale analysis of composite structures based on higher-order asymptotic homogenization with boundary layer correction	16
Roton dispersion and displacement oscillatory for a nonlocal mechanical system	16
FFT based iterative schemes for composite conductors with uniform boundary conditions	16
Exact second moments of strain for composites with isotropic phases	16
A variational fracture method based on Eshelby transformation	16
Structural behaviour of dicyclopentadiene-based polymers (DCPD) and GFRP in the automotive sector	16
Singular travelling waves in soft viscoelastic solids of rate type	16
Auxeticity of composite laminates made of specially orthotropic plies	16
A constitutive equation for nonlinear elastic solids, which is based on the use of the Gibbs potential and the nominal stress tensor	16
Acceleration of continuous-time, high-cycle fatigue constrained problems in topology optimization	16
Nonlinear analysis of unimorph piezoelectric nanobeam with a variable cross-section and flexoelectric effect	15
Fracture mechanism in SUS304 during small punch tests	15
Design and experiment of micro-vibration isolation system for optical satellite	15
Buckling and free vibration analysis of randomly distributed CNT reinforced composite beam under thermomechanical loading	15
Anisotropic elastic metamaterials for novel wave manipulation: a review	15
Modeling the biomechanical properties of soft biological tissues: Constitutive theories	15
Dynamic mechanisms of vortex-induced vibration in a flexible cable: Resonance modulation with moving boundary	15
Comparative analysis of nonlinear dynamic behaviors of hyperelastic curved structure modelled by different constitutive laws	15
Classical and relativistic balance of configurational forces	15
Modeling and vibration characteristics analysis of flexible spiral bevel gear system	15
Fractional strain gradient plasticity and ductile fracture of metals	15
Flexural behaviors of asymmetric Re-entrant auxetic honeycombs	15
A physics-based failure study of smart artificial tissues in human-like soft robots	15
The role of fractional calculus in modeling vibrations of a Timoshenko beam influenced by low and high thermal conduction	15
Static and free vibration analysis of functionally graded annular plates using stress-driven nonlocal theory	15
The improvements of new absolute nodal coordinate formulation based continuum beam elements in convergence, accuracy and efficiency	15
A metamaterial with negative thermal expansivity and programmable Poisson's ratio based on rotating triangles and quivering rhombi	15
Assessment of mixed-mode I/II fracture behavior of blunt V-notched 3D-printed PLA specimens: A strategy of material simplification using VIMC and EMC	15
Impact of hygro-mechanical loading on crack initiation and propagation in orthotropic media: A numerical modeling approach	14
A novel constitutive model for surface elasticity at finite strains suitable across compressibility spectrum	14
The failure behavior of syntactic foams as buoyancy materials for deepsea applications	14
Experimental study and crystal plasticity modeling of additive manufacturing IN718 superalloy considering negative strain rate sensitivity behavior	14
Periodic mass infused rail pads towards enhanced vibration control	14
Buckling instability analysis of delaminated beam-like structures by using the exact stiffness method	14
Mean-field descriptions for the viscoelastic response of thermorheologically complex reinforced solids	14
Dynamic modeling and nonlinear vibrations of a rotating poly-crystalline silicon microplate based on the modified couple stress theory	14
The effect of fuzzy fiber-reinforced composite skin on bending stiffness and debonding growth between skin and polymeric foam core of sandwich structures	14
The mechanics of thin elastic sheet reinforced with fiber mesh subjected to combined flexure and extension	14
Elastic guided waves in a spiral wire rope: Theory and modeling	14
Fragile points method for Euler–Bernoulli beams	14
Gradient-extended damage modelling for polymeric materials at finite strains: Rate-dependent damage evolution combined with viscoelasticity	14
Criterion for the functional dissipativity of the Lamé operator	14
A chemomechanical coupling model for diffusion and stress analysis in polymer-based anti-corrosion coatings	14
Fracture toughness and crack propagation in anisotropic triangular lattices	14
Effect of formulation method for plastic deformation rate on topology optimization considering elastic-plastic behavior	14
Impact response and energy absorption mechanisms of polypropylene woven fabrics with varying mechanical properties in flexible protection systems	14
A peridynamic differential operator-based scheme for the extended bond-based peridynamics and its application to fracture problems of brittle solids	14
Computational modeling of weld-line impacts on mechanical behavior of fiber-reinforced thermoplastics	14
Low-frequency sound and vibration reduction of a metamaterial plate submerged in water	14
Modeling metamaterials by second-order rate-type constitutive relations between only the macroscopic stress and strain	14
Analysis of factors influencing on performance of solid tires: Combined approach of Design of Experiments and thermo-mechanical numerical simulation	14