Transactions of the Indian Institute of Metals

Article	Citations
Effect of Drying Route and Sintering Temperature on Zirconia Nanoparticle Synthesis for Filler Application in Polymer Composites	49
Improvement of Low-Velocity Impact and Abrasive Wear Resistance of Carbon/Glass Fiber-Reinforced Polymer Hybrid Composites	36
Microstructural Characterization of Cold Bent and Subsequent Thermal Aged Inconel Alloy 617	35
Effect and Optimization of Welding Parameters and Flux Baking on Weld Bead Properties and Tensile Strength in Submerged Arc Welding of HSLA 100 Steel	33
Celite and Unsaturated Polyester Resin Composite for High-Voltage Automotive Ignition Coil Insulation-Based Applications	31
Influence of α-Al2O3 Ceramic Nanoparticles on the Microstructure and Mechanical Properties of Pure Aluminium Based Nanocomposites	31
Effect of Thermal Oxidation Duration on Fretting Wear Behavior of Ti6Al4V in Ringer's Solution	31
Flow-Assisted Corrosion of API 5L X56 Steel: Effect of Flow Velocity and Dissolved Oxygen	30
Fe3O4 Nanoparticles Embedded in Polyvinylpyrrolidone Matrix: Effects of Synthesis Processes on the Structure and Magnetic Properties	29
Oxidation and Hot Corrosion Studies of Laser Hybrid Welded IN617 and P91 Alloys	24
Utilization of Kimberlite as Binder for Iron Ore Pellet Making	23
Simulation of Solidification, Microsegregation, and Heat Treatment of Cr-Based Fe–xMn–7.5Al–1.0C Lightweight Steels	23
A Study of Microstructure Evolution for Mg Alloy Subjecting to Multi-Pass Equal Channel Angular Extrusion	22
Plant Trials of the MAXGen Flotation Mechanism in a Lead Flotation Circuit	21
An Overview of Thermodynamics and Growth Kinetics of Gas Hydrate Systems	21
EBSD Analysis of 316L Stainless Steel Weldment on Fusion Reactor Vacuum Vessel	20
Experimental Investigation of the Influence of Weight Percentage, Particle Size, and Heat Treatment on the Properties of SiC Particle Reinforced: A356 Aluminum Matrix Composite	20
Microstructure and Mechanical Properties of an Er-Modified Al–Mg–Mn–Sc–Zr Alloy Processed by Selective Laser Melting	19
Mechanical and Wear Response of TiO2 Scaffolds Processed via Powder Metallurgy	19
Microstructural Evolution and Mechanical Properties of Nano-Yttria Dispersed 316 L Austenitic Stainless Steel by Mechanical Alloying and Sintering	19
Effect of Severe Plastic Deformation During Slot Milling on Nimonic 263 Surface Features	19
Numerical Simulation of Temperature Fields and Residual Stresses in Multi-Pass Weld Using the Novel Prescribed Temperature Approach with Experimental Validation	19
The Influence of Plastic Strain and Microstructure on the Electrochemical Noise Response of AA 7004 in 0.6 M NaCl	18
A Meso-Scale Model to Describe the Creep Response and Microstructure Evolution of Superalloy IN-718	18
Recent Progress in Aluminium Matrix Composites: A Review on Tribological Performance	18

Utilization of Pellet Fines in the Iron Ore Sintering Process	17
Corrosion and Wear Behaviours of Aluminium Composites Reinforced with Palm Kernel Shell Ash and Silicon Carbide	17
Effect of Impact Velocity and Impingement Angle on the Erosive Wear Behavior of Ceramic Reinforced Polymer Composites	17
Microstructural and Eddy Current Evaluation of Ball-Milled Nanostructured Aluminum–Titanium Alloys	16
Research Progress on Metallic Heterostructure Materials	16
Thermo-Mechanical, Tribological and Microstructural Properties of Aluminium AA8011/B4C/Graphene Based Hybrid Composites	16
Evaluation of the Structural Characteristics and Wear Performance of the Novel ECAR-Processed AA5083 Alloy	16
Multi-criteria Decision Making of Single Point Incremental Forming Process Parameters for Duplex Stainless Steel 2205 Using ARAS and COPRAS Techniques	15
A Review of Experimental Research on Hot Tearing of Aluminium Alloy Casting	15
Growth Behavior and Wear Resistance of PEO Coatings in Bipolar Mode	15
A Review of Polystyrene Nanoparticles as Selective Collectors in the Copper Froth Flotation Process	15
Mechanical and Thermal Analysis of Cissus Quadrangularis Stem Fiber/Epoxy Composite with Micro-Red Mud Filler Composite for Structural Application	15
Hardening of Cr–Cu–Al–Fe–O High-Entropy Composite Films	15
Microstructural and Wear Behavior of Al2014-Alumina Composites with Varying Alumina Content	15
Effect of Zinc Addition on the Microstructure and Properties of Al–Si–Cu–Mg Cast Alloy	14
Bainite Transformation Behavior and Mechanical Characteristics of Medium-Carbon High-Silicon Steel via Austempering	14
Thermal Properties of Mg-B4C Micro and Nanocomposites Fabricated by Static and Dynamic Compaction Methods	14
Improvement of Elevated Temperature Wear Resistance of Side Guides Using Microstructural Engineering (Case Study: Hot Rolling Line of Mobarakeh Steel Complex)	14
Multi-Modal Imaging-Based Foreign Particle Detection System on Coal Conveyor Belt	14
Process Parameter Optimization and Metallurgical Characterization in Double Pulse MIG Welding of SS 304 H	14
Sequential Two-Step Reduction of High-Purity Nano Copper with Glucose and Ascorbic Acid for the Synthesis of Nano Silver-Coated Copper	13
Studies on Impact of Magnesium (Mg) Interlayers on Dissimilar Friction Stir Welding of Aluminum and Copper	13
Study of Microstructure and Mechanical Properties of Short Carbon Fibers Reinforced Mg Matrix Composites Fabricated by Hot Extrusion	13
Simulation of Classification and Stratification in Double-Deck Roller Screening of Green Iron Ore Pellets using DEM	13
Dual Matrix Array Probe Based Phased Array Ultrasonic Testing for Inspection of Trimetallic Weld Joints	13
In Situ Formation of Titanium Diboride in A356/B4C + TiB2 Hybrid Composite: Evaluation of Microstructure, Mechanical Properties, and Wear Behavior	13
Recent Progress in Hydrometallurgical Processing of Nickel Lateritic Ore	13
A Study of the Functionally Graded (Magnesium/Titanium Dioxide) Material's Mechanical and Tribological Characteristics Fabricated at Various Compaction Loading Rates	13
A Prediction Model for Additive Manufacturing of AlSi10Mg Alloy	13
Influence of Toughness and Retained Austenite on Wear Behaviour of Carbide-Free Bainite in High Silicon Steel	13
The Effect of Chopped Carbon Fiber on Morphology, Electromagnetic, and Mechanical Properties of Glass/Epoxy Composites for Aerospace Application	13
Effect of Post-weld Heat-Treatment on Microstructure and Mechanical Behavior of Inconel 625 Overlay Cladding on 2.25 Cr-1Mo Steel	12
Effect of Cycling Heat Treatment on the Microstructure and Properties of H13 Steel Prepared for Hot-Extrusion Die	12
Tribological Behaviour of Plasma-Sprayed Graphene Nanoplatelets Reinforced Hydroxyapatite Nanocomposite Coating	12
Coated Natural Fiber Reinforced Hybrid Composite: Mechanical, Thermal, and Acoustic Performances	12
Analysis of the Microstructural Transformation and Oxidation Behavior of Fe–0.9Cr Alloy Steel at 900–1150 °C	12
Atmospheric Corrosivity Map of Bare Steel and Hot-Dip Galvanized Steel in Central, Northern, and Northeastern Thailand	12
Continuous Stiffness Measurements and Nanoindentation Studies of bcc Mo: An Atomistic Approach	12
Effect of Morphological and Microstructural Variations on the Properties of Electroless Nickel Boron Coatings	12
Effect of High-Frequency Mold Oscillation on Morphology of Primary and Eutectic Phases of A308 Aluminum Alloy	12
Microstructure of Gravity-Cast and Suction-Cast Aluminium–Cerium-Based Alloys	12
Synergistic Effects of Graphene and Ceria Nanoparticulates on Microstructure and Mechanical Behavior of Stir-Cast Hybrid Aluminum Composite	12
Recovery of Rare Earth Values from Micro-granite Type Hard Rocks Using Deep Eutectic Solvents	12
Effect of Addition of B4C on Microstructure and Mechanical Properties of Ti Matrix Composite Reinforced with In situ Hybrid TiB + TiC Reinforcements Fabricated by Pressureless Sintering	12
Recovery of Mo and V from the Spent Catalyst Using Organophosphorus Extractants	12
Investigation of the Effect of Zirconium Amount on Grain Size and Wear Performance in TZM Alloys Produced by Mechanical Alloying Method	11
Iron Matrix Composites: Improving Tribological Behaviour with Functionalized Nano-Cu-Coated C/SiO2 Particles	11
AZ91D Matrix Composites Reinforced with AlCrFeCoNi High-Entropy Alloy Particles Fabricated via Squeeze Casting	11
Application of Digital Image Correlation to Small Punch Test for Determination of Stress–Strain Properties	11
Characterizing Structural Heterogeneity in Metallic Glasses: A Molecular Dynamics-Guided Machine Learning Approach	11

An Analytical Review on the Degradation Mechanisms and Magnesium Alloy Protective Coatings in Biomedical Applications	11
Numerical Analysis of Hot Deep Drawing Process of the Thick Hemispherical Head Without the Blank-Holder	10
An Investigation into Dimensional and Mechanical Properties of Multilayered Metallic Structure Deposited Using TIG Based WAAM Process	10
Corrosion Behavior of Anodized and Sol–Gel Duplex Coatings on AA3004	10
Effect of Heat Input on the Microstructure and Mechanical Properties of 6060 Aluminum Alloy/Galvanized STEEL MIG Welding–Brazing Joints	10
The Influence of Multi-Pass Hot Rolling Parameters and Subsequent Heat Treatment on Microstructure and Mechanical Properties of Medium-Carbon Steel	10
Electroless of Ni–Mo–P/CNTs Composite Coatings on AZ91D Magnesium Alloy: Corrosion and Wear Resistance	10
A Study on Fatigue Life Assessment of Alloy 718 as a Function of Load Ratio in Conjunction with Newman’s Model	10
Effect of Post-Cathodic EPD Acetone Washing of Carbon Fibres on the Mechanical Properties of Graphene Carboxyl Embedded CFRP Composites	10
Experimental Investigation of the Hydrophobic and Modal Properties of Epoxy Nanocomposites Reinforced with Graphene Nanofillers	10
Microstructure and Properties of Fe-Based Coating after Tempering	10
The Role of Impingement Angle and Velocity on the Solid Particle Erosion Behavior of Agave Lechuguilla Fiber-Reinforced Polymer Composite	10
Preparation and Synergistic Antibacterial Effect of Zinc and Cerium Co-Doped Silica	9
Effect of Hot Deformation Parameters on Dynamic Recrystallization Behavior of As-Extruded GH4151 Alloy	9
Hot Metal Silicon Prediction in a Blast Furnace by Using a Deep Neural Network	9
Effects of Cr and W in TiMoNb Refractory High Entropy Alloys	9
Modification of Steel Surface by Anodic Plasma Electrolytic Boriding and Polishing	9
Formation of a Composite Coating by Crystallization of a Supersaturated Solid Solution in the Ni–W System	9
Effect of Welding Heat Input on Microstructure and Properties of Coarse-Grained HAZ of 500 MPa High-Strength Low-Alloy Steel	9
Effect of Surface Micromorphology and Roughness of Iron Ingot on Microstructures of Hot-Dip Galvanized Coating	9
Microwave Butt Joining of Stainless Steel (SS-316L) With an SS-316L Powder	9
Characteristics of Dissimilar Ti/Al Butt-Lap Joint Fabricated via Ultrasonic-Assisted Friction Stir Welding	9
Utilization of High-Alumina Iron Ore in Pellet Making Through Process Optimization	9
Numerical Analysis of Different SUS304 Steel Weld Joint Configurations Using new Prescribed Temperature Approach	9
Synthesis and Electrochemical Corrosion Behaviour of High Entropy Alloys	8
Effect of Aluminum Content on the Crevice Corrosion Behavior of Magnesium Alloys	8
Microstructure and Deformation Characteristics of Mn–Si–Cr Ultra-high Strength Steel	8
Effect of Quenching Method on the Structure of Glass Slag	8
The Effects of Small Amounts of Niobium Addition to Mechanical Alloyed AISI 304 Stainless Steel on the Microstructural and Tribological Properties	8
Microstructural and Micro-Analysis of Zirconium: Stainless Steel alloys for Radioactive Metallic Waste Management	8
Texture Evolution During Hot Compression of CoCuFeMnNi Complex Concentrated Alloy Using Neutron Diffraction and Crystal Plasticity Simulations	8
Freeze-Casted Porous Lamellar-Structured Alumina Ceramics and Polymer-Infiltrated Composites: Synergistic Enhancement of Structural Properties	8
Parametric Optimization of FSWed Dissimilar Composite Joints of AA7075 and AA6061 Using RSM	8
Comparison of TIG and MAG Welding Methods for Stainless Steel Milk Tanker	8
First-Principles Calculations on the Enhancing Effect of Zr on the Mechanical and Thermodynamic Properties of Ir–Rh Alloys	8
High-Temperature Rheological Behavior and Composition Design of Hf-Be-Ti-Zr-Cu-Ni High-Entropy Amorphous Alloy	8
Effect of Nitrogen on the Precipitation and Pitting Corrosion Susceptibility of High Nitrogen 316SS Weld	8
Role of Novel Forming Technologies and Materials in Automotive Applications	8
Simulation and Experimental Analysis of Double Rotating Shoulder Friction Stir Welding	8
A FEM-Supported Hybrid Approach for Determination of Stress–Strain Relation of Poly-alloy Coating by Inverse Analysis	8
Microstructural and Mechanical Properties of Aluminum Matrix Composite Reinforced with Cu-Zn-Al Particles Fabricated by Friction Stir Processing	8
Investigating Heat Transfer Strategies for Geometrical Accuracy and Solidification Behavior of Additively Manufactured SS316L Thin Clad Structures	8
Production of Ti–Ni–Cr–Fe–Nb–Mo Composite Coatings via TIG Process and Annealing Treatment	7
Tribological Properties and Microstructures of Tungsten Carbide and Few-Layer Graphene-Reinforced Aluminum-Based Composites	7
Wire and Laser Additive Manufacturing of Titanium/Steel Composites: Effect of Copper Interlayer on Microstructure and Mechanical Properties of Ti–Cu–Fe Interface Region	7
Phase Balance Control of Duplex Stainless Steel Overlay with Buffer Layer	7
Analysis of Inclusions in U75V Heavy Rail Steel	7
Microstructure Evolution and Microhardness of AlxNi2−xCoCrFe Alloys After Long-Time Annealing	7
Influence of Treatment Time and Temperature on Surface Property of Active Screen Plasma-Nitrided EN24 Low Alloy Steel	7
A Review on Heat Transfer Modulation using Experimental Approach	7
Effect of Various Spheroidizing Methods on Microstructure–Mechanical Properties and Wear Performance of PM High-Carbon Steel	7
Enhancement of Elastic Modulus by TiC Reinforcement in Low-Density Steel	7
Preparation of Woody LaCo0.7Fe0.3O3 Perovskite-Type Catalyst Assisted with Non-thermal Plasma and Its Purification Performance on PM and NOx	7
Critical Velocity for Cold-Sprayed Coatings	7
Creep Behaviour of Directionally Solidified Nickel-Base Superalloy CM 247: A Three-Dimensional Representation of Creep Curves	7
Investigating the Wear Resistance of 18Ni300 Steel Reinforced by Nanostructured WC Particles Using Molecular Dynamics Simulations and Experiments	7
Effect of Zn or Zn + Cu Addition on the Precipitation in Al–Mg–Si Alloys: A Review	7
Effect of Aviation Turbine Fuel Exposure on Tensile and Flexural Properties of Glass Fiber-Reinforced Epoxy Composite	7
High Strain-Rate Through-Thickness Compression Testing of Symmetrical Inter-ply Hybrid Polymer Composites Reinforced with Carbon/Glass and Carbon/Kevlar Fibers	7
Soft Sensors and Diagnostic Models Using Real-Time Data of Coke-Making at Tata Steel	7
Application of the Statistical Method to Analyze the High-Temperature Tribological Properties of Aluminum Composites	7
Characteristics Investigation on Aluminium/Diamond Composites Fabricated Through Powder Metallurgy	7
Investigations on Corrosion Behaviour of Surface Texturing on Ni45Ti55 Alloy Manufactured Using µ-Plasma Additive Manufacturing Process	7
Effects of Quenching Temperatures on Microstructure, Phase Transformation Characteristics and Shape Memory Behaviors of CuAlTa and CuAlTaNb HTSMAs	7
Green Synthesis of Palladium Nanoparticles Using Medicinally Important Plant Extracts	7
Pathways to Titanium Martensite	7
The Taguchi and Response Surface Method for Optimizing Orbital Pipe Welding Parameters in Pulsed Current Gas Tungsten Arc Welding (PC-GTAW) for SS316L	7
Study on Recrystallization Initiation Model and Microstructure Evolution Mechanism of 18CrNimo7-6 Steel During Hot Deformation	7
A Comparative Study of Pulse and DC Electroplating of Zn onto Mild Steel for Improved Corrosion Resistance	7
Influence of TiO2 on Intragranular Acicular Ferrite Nucleation in Low-Carbon Steel	7
Study on the Improved Mechanical Properties of RAFM Steel After Dual Equal-Channel Lateral Extrusion: Reflected by Quantified Microstructure	7
CFD Modelling of the Spiral Concentrator at Moderate Feed Solids Content-Prediction of Particle Segregation	7
Atomic-Scale Study of Grain Boundary Evolution in the Abrasive Wear of An Al–Li Alloy	7
Ti2SnC MAX Phase Directly Synthesized by High-Temperature Ball Milling	7
Mechanical Properties of Al–Si–Mg Foams with Different SiC Contents and Densities	6
Development of Microstructure Homogeneity and Mechanical Properties After ECA-Extrusion of Copper Alloy C11000	6
Biodegradable Magnesium Alloy-Based Composites: Properties, Processing, and Surface Coatings—A Review	6
Insight of Reduction Roasting of a Low-Grade Goethitic Indian Iron Ore in a Rotary Kiln: Process Optimization and Characterization	6
A Dual-Side Deposition Technique to Mitigate Deformation in Wire Arc Additive Manufacturing	6
Effect of Tempering on Mechanical Properties and Ballistic Performance of Novel Armor Steel by Hot Stamping	6

Nonlinear Deformation of Fe, FeSi and FeCrSi with BCC Structure Under Pressure	6
Hot Impression Creep Behavior of AlSi10Mg Alloy Fabricated through SLM Route	6
Corrosion Mechanism of Three-Dimensional Network Configuration SiC–Fe Composites in Deep Mine Environment	6
Enhancement of the Mechanical and Corrosion Behaviour of FSW Joints Using a Novel Particle Reinforcement Approach	6
Influence of SiC and B4C Ceramic Particles on Mechanical and Thermal Behavior of Al8090 HMMCs Produced by Double Step Stir Casting Technique	6
A Feasibility Study on Recycling of CM-247LC Ni-Base Superalloy for Production of Aeronautical-Grade Cast Parts of Gas Turbine Engines	6
Effect of Submerged Entry Nozzle Design on Fluid Flow Dynamics Inside the Thin Slab Caster Mold	6
Dendrites with Corners	6
Cyclic Thermal Dependent Microstructure Evolution During Laser Directed Energy Deposition of H13 Steel	6
Tribological Performance and Wear Mechanism of Laser Cladded NiCrAl-WC Coatings at High-Temperature	6
Effects of Cryogenic Aging on Flexural Behavior of Advanced Inter-ply Hybrid Fiber-Reinforced Polymer Composites	6
Low-Temperature Superplasticity of Ultrafine-Grained VT6 Alloy	6
Effects of Hot Extrusion, Load, Sliding and Velocity on the Wear Properties of ZrO2@CNTs/2A70 Composites	6
Exploring the Effect of TiO₂ Nanoparticles on the Microstructural Dynamics and Mechanical Attributes of Dissimilar FSW Joints Between AA7071 and AZ31	6
Microstructure and Mechanical Properties of Electron Beam Melted Nb–W and Nb–W–Zr Alloys	6
Application of GA-ACO Algorithm in Thin Slab Continuous Casting Breakout Prediction	6
High-Density Bulk Metallic Glasses and Their Composites for Kinetic Energy Penetrator Applications: Process, Structure and Properties	6
Superior Mechanical Properties of Aluminium Matrix Composites Fabricated through Modified Matrix Encapsulated Feeding Method	6
Study on the Crystalline and Microstructural Features of WC–Co Powder Ball-Milled with TiC, (Ta, Nb)C and VC and Subsequent HIP	6
Role of Nickel Particulate Reinforcement on Microstructure and Mechanical Performance of AZ31 Magnesium Composite	6
Corrosion Behaviour of Cryogenic-Treated Dissimilar FSW Al Alloys	6
Utilizing γ- and θ-Alumina from Aluminium Black Dross for Catalytic Applications: Hybrid Sustainable Pyro–Hydrometallurgy and Residue Heat Utilization	6
Unveiling the Microstructural Segregation and Micro-hardness Behaviour in Ti-6Al-4 V Alloy Prepared through Copper Mould Casting	6
Innovations in Thermo-mechanical Processing to Develop High Strength Steel Plates	6
Solidification Simulation and Experimental Validation of Single-Phase Fe–Co–Cr–Ni–V–Al High-Entropy Alloy	6
Functionalized Coatings on Degradable Magnesium Alloys for Orthopedic Implants: A Review	6
Effect of Coatings on the Mechanical Properties and Fatigue Life of 6061 Aluminum Alloys	6
Effect of Ultrasonic Power on Microstructure and Properties of Ultrasonic-Assisted Electrodeposited Ni–Al2O3 Thin Nanocoatings	6
Modeling Study on the Initial Solidification and Formation of Oscillation Marks in Continuous Casting Mold	6
Effect of Cooling Conditions on the Solidification Microstructure and Mechanical Properties of Al–18Si Alloy	6
Wire EDM Parameter Optimization of AlSi10Mg Alloy	6
Optimisation of Predicted Wear and Friction for Electroless Ni–P by RSM, Fuzzy Logic and ANFIS Using TOPSIS	6
Particularities of the Formation and Modification of Si and Mg2si as Second Phases in Casting Al Alloys: Use of Shape Descriptors and Fractal Dimension	6
Applicability of Angular Orientations of Gating Designs to Quality of Sand Casting Components Using Two-Cavity Mould Set-Up	6
Hot Working Property Study of 7055 Aluminum Alloy Based on Hot Shear-Compression Deformation	6
Analysis of Dry Wear, Microstructure and Thermodynamic Parameters of CuAlTa Bulk Material	6
Effect of Post-Deformation Heat Treatment on the Microstructure and Properties of Inconel 617 Alloy	6
Finite Element Analysis and Experimental Investigation on Effect of Process Parameters in Plasma-Assisted Friction Stir Welding of Low Carbon Steel	5
Effects of Graded Powder Dosage Factors on the Densification of LPBF Processed Inconel 718	5
Microstructural Simulation of Damage and Crack Growth Due to Low Cycle Fatigue After Severe Plastic Deformation of 7075 Al Alloy	5
Effect of Temperature on the Structure and Mechanical Properties of Zr–2.5% Nb Alloy Processed by Rotary Forging	5
Effect of Remelting on Microstructure Formation for Multi-layer and Multi-track Laser Additive Manufacturing	5
Effect of Co-Addition of Ag and Cu on Mechanical Properties of Sn–5Sb Lead-Free Solder	5
Sorption Extraction of Gallium from Alumina-Alkaline Solutions	5
Flow Behavior and the Critical Strain of Dynamic Recrystallization for Mg-10.22Gd-2.31Y-0.1Zr Alloy	5
Microstructure Evolution and Hot Deformation Behavior of Two Phase Titanium Alloy in α/β Region	5
CFD Modelling of Blast Furnace Blast Pipe-Tuyere-Raceway Region to Predict Relative Coal Burnout with Natural Gas Injection and Double-Lance Design	5
Sustainable Process for Preparation of Ti rich Alloy from Acidic TiO2 Sludge	5
Current Global Status of Rare Earth Elements (REEs) and Their Role as Catalysts in Reducing Air Pollution for Maintaining Environmental Sustainability	5
Numerical and Experimental Validation for Prediction of Failure in Electromagnetic Forming of AA6061 Sheet	5
Critical Considerations for Numerical Simulation of Multiphase Fluid Dynamics in Gas-Stirred Vessels	5
Microstructure and In Situ Tensile Mechanical Properties of Ti/Al3Ti Composites Prepared by “Explosive Welding + Heat Treatment”	5
Preparation of Ultra-thin Copper Foil with Low Profile and High Tensile Strength on Surface of 18-µm Carrier Copper Foil	5
Preparation and Tribological Properties of Face Centered Cubic TiB Coatings on the Ti6Al4V Alloy	5
Wear and Microstructural Characteristics of Colmonoy-4 and Stellite-6 Additive Layer Deposits on En19 Steel by Laser Cladding	5
Special Issue Dedicated to Late Dr. Srikumar Banerjee	5
The Effect of Hot Rolling Temperature on the Wear Properties of NiTi Rods	5
Synthesis of Nanocrystalline Al10Co25Cr8Fe15Ni36Ti6 Alloys Dispersed with Y2O3 by Mechanical Alloying Method	5
Effects of In Situ TiB2 Particles and (Ce + Yb) on the Microstructure and Mechanical Properties of Al–Si Matrix Composites	5
Prominence of Narrow Groove on Pulsed Current GMA and SMA Welding of Thick Wall Austenitic Stainless Steel Pipe	5
Computational Study of Transport Phenomena in Laser Melting-Based Metal Additive Manufacturing	5
Effect of Strontium Addition on Semi-Solid Slurry Generation of Novel Al–15Mg2Si–4.5Si Composite During Cooling Slope Rheoprocessing	5
Dimensional Analysis-Based Modelling of Weight Loss and Degradation Rate of Topologically Ordered Functionally Graded Iron–Hydroxyapatite–Zinc Composite Biomaterial Using Buckingham’s π Theorem	5
Effects of Rare Earth Elements on Inclusions and Impact Toughness in a Weathering Steel	5
Effect of Post-FSW FSP Pass on Tensile Mechanical Characteristics and Hardness of Welded Samples of AA6061 Aluminum Alloy	5
Effect of Octahedral Fe/Mn Ions on the Structural, Dielectric and Magnetic Properties in Yttrium Double Perovskite Y2FeMnO6	5
Demystifying the Mushroom Formation Mechanism in BOF Steelmaking Using Physical Modeling Approach and Plant Trial	5
Experimental Investigations of Sesame Oil-Based Nano-Lubricant in Four-Stroke SI Engine	5
Innovative and Affordable Interventions for Water Purification in Rural Communities	5
Development of Cast AZ63 Magnesium Alloys for Cathodic Protection Applications via Alloying Additives	5
Leaching Performance of Glass–Ceramic Prepared from High-Carbon Ferrochromium Slag and Its Application in the Urban Constructions	5
Microstructure and Mechanical Properties of the Bimetallic Wire Arc Additively Manufactured Structure (BAMS) of SS304L and SS308L Fabricated by Hybrid Manufacturing Process	5
Effect of Modified Casting Process on Toughness and Wear Resistance of LM25 Alloy	5
Optimization of Column Flotation for Fine Coal Using Taguchi Method	5
Strain Rate Loading Effects on Fiber-Reinforced Polymeric Composites with and Without Damage: A Comprehensive Review	5
Study on Microstructure and Mechanical Properties of Aluminum–Copper Dissimilar Metals Joints by Nanosecond Laser Spiral Welding	5
Preparation, Microstructure and Mechanical Properties of In-Situ TiC/Al–Si–Fe Aluminum Matrix Composites	5
Phase Evolution Mechanism of Cu2Se Compound During Mechanical Milling and Spark Plasma Sintering Process	5
Study on the Effect of Basicity on the Densification Behavior of Sinter	5
Direct-to-blister Smelting of High-Alumina Chalcocite Based on Al2O3–CaO–SiO2 Slag System	5
Criticalities in the Laser Welding of Li-ion Batteries	5
Gallium-Based Metallic Pastes: Preparation from Powder Mixture by In Situ Synthesis of Liquid Component	5
Active Screen Plasma Nitriding Characteristics of 347H Austenitic Stainless Steel	5
Research on Droplet Size of Short-Circuiting Transfer in CO2 Gas-Shielded Arc Welding Based on High-Speed Photography	5
Biodegradable Mg–3Zn Alloy/Titanium–Hydroxyapatite Hybrid Composites: Corrosion and Cytotoxicity Evaluation for Orthopedic Implant Applications	5
Development of ultra high strength steel with high ductility by air cooling post single stage quench partitioning	5
Effect of Temperature and Strain on the Microstructure and Mechanical Properties of AA6061/AZ31 Laminated Composite Produced by Hot Forge Bonding	5
Impact Toughness of Selected Precipitation Hardening Aluminium Alloys	5
Effect of Isothermal Cooling Time on Microstructure Transformation and Hardness of a Ti-V-Mo Microalloyed Steel	5
Microstructure and Mechanical Properties of a Novel GH4720Li Superalloy Ingot in Cogging via Multi-directional Forging	5
Effect of Multipass on Microstructure and Intergranular Corrosion Behavior of DSS 2205 Shielded Metal Arc Weld Thick Sections	5
Effect of Bimodal Structure on the Frictional Properties of Copper–Graphite Composites	5
Effect of Aluminum Addition on Microstructure, Recrystallization and Work Hardening of MnCrCoFeNi High-Entropy Alloy	5
Thermal Properties of Hot Isostatic Pressing Al/B4C Composites with 50wt% B4C Content	5
Effect of Nano-ZrO$$_2$$ Additions on Fabrication of ZrO$$_2$$/ZE41 Surface Composites by Friction Stir Processing	5