Intermetallics

Article	Citations
Preparation of porous TiNi intermetallic compound and the corrosion behavior in NaCl solution	106
A novel mechanochemical synthesis of ferromagnetic Fe3Al nanoparticles and preparation of its polyaniline nanocomposite	84
Tribological behaviors of a Ni-free Zr-based bulk metallic glass in simulated physiological environments	82
Influence of the Nb–Al ratio on homogenization behavior and hierarchical microstructures in high-entropy superalloys	75
Simultaneous achievement of superior tensile properties and melt corrosion resistance in a single-phase BCC Ti32Nb32Ta32W4 multi-principal element alloy	75
Optimizing microstructure, magnetic properties and mechanical properties of sintered NdFeB magnet by double alloy method and grain boundary diffusion	71
Realizing outstanding strength-ductility combination in dual-phase casting AlCoCrNi high-entropy alloy	68
Effect of carbon content on the microstructure and tribological properties of FeCrMn1.5AlCuC high-entropy alloys	64
Achieving high performance HPS TiAl based alloy by adjusting sintering process parameters to eliminate heterogeneous microstructure and original powder boundaries	62
Direct observation of the 12R transition structure during the C15→C14 phase transformation in Zr(Fe, Cr)2 Laves structured nanoparticles in Zircaloy-4	62
Investigation of a novel sub-surface work hardening phenomenon in micro-turning of Zr-based bulk metallic glass	59
Phase equilibria in the Y-B and Y-Fe-B systems	59
Experimental determination and thermodynamic reassessment of the Al–Cr–Ru ternary system	57
Simultaneously improving the plasticity and corrosion resistance of biomedical Mg-based bulk metallic glass by introducing SnZn alloy solder	55
Effect of Nb content on the mechanical properties of Nbx(MoTaW)(1-x) (x = 0.4, 0.55, and 0.7) refractory multicomponent alloys	53
Unusual energy–structure–property relation in a metallic glass coupled with temperature-dependent relaxation memories	53
Switching thermal expansion from negative to positive in Nd2Fe17 via uniaxial stress	51
Influence of short-range order on precipitate orientation relationships in aluminum containing FCC high entropy alloys	50
The fabrication and characterization of new NiCuTiZrFe high entropy shape memory alloys with exceptional functionality	50
“Tailoring thermal stability and in-plane magnetic anisotropy of CoFeB alloy thin films via growth conditions engineering”	50
Separating the effect of athermal and isothermal ω on superelasticity in Ti-24Nb (at.%)	49
The scandium effect in Gd-rich BMGs: How and why does this ingredient work better than others?	48
Development of L12 nanoparticles strengthened Ni-Co-Al-Ta based superalloys with excellent comprehensive properties	48
Editorial Board	47
The effect of heat-treatment on microstructure, wear resistance, and corrosion resistance of laser cladding AlCoCrFeNi2.1 high entropy alloy coating	47

Effect of texture on mechanical anisotropy of Ti–47Al–2Cr-0.2Mo intermetallics	46
Structural rejuvenation and relaxation of a metallic glass under the periodically thermal-mechanical loading	44
Formation of eutectic and hydrogen absorption/ desorption behavior of heat-treated Ti19Hf4V40Mn35Cr2 alloys	42
Corrosion and passive behaviors of the Co-Cr-Fe-Ni-Nb eutectic high-entropy alloys in different electrolyte solutions	41
Enhancing corrosion resistance of non-equiatomic FeNiCoCr high-entropy alloys via metalloid Si alloying	41
Solidification behavior of TiB2-Ti2AlN reinforced TiAl composites with variation Al content	40
Electron beam welding of the novel L12 nanoparticles-strengthened medium-entropy alloy Ni41.4Co23.3Cr23.3Al3Ti3V6: Microstructures, mechanical properties, and fracture	39
Microstructure and properties of FeCoNiCr and FeCoNiCrW high entropy alloy coatings by electro-deposition	36
Interactions of primary intermetallic compound particles and double oxide films in liquid aluminum alloys	36
Microstructure, mechanical and frictional properties of CrCoNi-xNb alloys prepared through powder metallurgy	36
Effects of Si Addition on the glass forming ability and properties of FeBPNbCr amorphous alloys	35
Mechanical and electrochemical properties of porous NiTi intermetallics synthesized via rapid thermal explosion	35
Microstructure and mechanical properties of a severely cold-rolled and annealed dual-phase compositionally complex alloy (CCA) with an exceptionally deformable Laves phase	35
Study on mechanical response and penetration mechanism of lightweight BCC high-entropy alloy (Ti2Zr)1.5NbVAl0.5 under extreme dynamic loads	34
Enhanced strength and crack resistance in CoCrNi-based medium entropy alloy with nano-precipitates, 9R structures and nanotwins produced by hot isostatic pressing	34
Boron-induced microstructure evolution and related wear behavior in NbMoTaWBx high-entropy alloys and composites at room and elevated temperatures	33
Serrated flow stress in the CoCrFeNi multi-principal element alloys with different grain sizes and added Re	33
Retainable short-range order effects on the strength and toughness of NbMoTaW refractory high-entropy alloys	33
Hetero-lamellar design alleviates the Ubiquitous strength-ductility trade-off in high-entropy alloys	33
Outstanding high-temperature strength-ductility combination in inconel 718 alloy by warm rolling and simplified aging treatment	32
Improvement of soft magnetic properties of a Nanoperm-type Fe-Hf-B nanocrystalline alloy upon surface crystallization inhibition by Cu addition	32
Role of surface roughness in governing the mechanical, electrical, magnetic, and optical properties of amorphous Co40Fe40Gd20 thin films on flexible substrates	32
Ultrahigh-temperature internal friction peaks in polycrystalline nickel-based superalloys	32
Coercivity enhancement and microstructure optimization of Nd-Fe-Co-B magnets by Dy70Al10Cu20 grain boundary diffusion	31
Tailoring the corrosion behavior of Fe-based amorphous alloy by melt temperature	31
Effect of caliber rolling on microstructures and properties of an inoculated Cu–Al–Ni shape memory alloy	31
Magnetic structure analysis of the L21-type austenite in Ni–Mn–In alloys	30
Investigation of tribological properties of heat-treated ZrNbTiVAl high entropy alloy in dry sliding conditions	30
The scratch characteristics of laser nitrided Zr-based metallic glass surface	30
Multiscale-phase-driven strength-ductility synergy in Fe3Cr2CoNiAlx high entropy alloys	30
Effect of phase composition and cluster structure on de-/hydriding kinetics of as-cast and heat-treated Ti33V37Mn30-Cr alloys	30
Integrating HIP and homogenisation heat treatment and its effect on the workability of a conventional peritectic TiAl alloy	30
Effects of 800°C NaCl salt-spray corrosion on fracture behavior and deformation mechanism in a NiCoCr-based superalloy	30
Low-temperature electrical and thermal transport properties in Mn3Al alloy	30
Dealloying of Mg-based alloys for production of self-supporting metallic nanostructures	29
Corrigendum to “Achieving enhanced strength-ductility balance in (Fe35Ni35Cr20Mn10)98.5C1.5 high-entropy alloy by thermomechanical treatment” [Intermetallics 196 (2026) 109352]	29
Enhancement of strength-plasticity synergy in a graphene metallic glass composite	29
Vacancy formation modulating the local atomic environment for remarkable Multi-functional Magnetic properties in Ni–Co–Mn–In alloy	29
Substitution behavior of Cu doped into Fe3Si and its effect on the electronic structure and mechanical properties based on first-principles calculation	29
Microstructure evolution, mechanical properties and wear resistance of Fe based bulk metallic glass consolidated via spark plasma sintering	29
Thermomigration suppression in Sn3.5Ag solder joints by hot-end FeCoNiMn alloy	29
Relieving residual stress and enhanced mechanical properties by novel sandwich composites filler metal	29
Tailored laser power in selective laser melting for enhanced high-temperature oxidation resistance of CoCrNi medium-entropy alloys	29
Extraordinary strength-ductility synergy in a novel high-entropy alloy via coupling multiple strengthening mechanisms	29
Microstructure evolution and mechanical properties of Ti-46.5Al-4Nb-1Cr-0.2Ta alloy during near-isothermal forging at α single-phase region	28
Effect of Si on the microstructure and corrosion behavior of AlCrFeNiNbSix HEA coating fabricated by laser cladding	28
Optimization of HVOF spraying parameters for enhanced Fe-based amorphous coatings: A taguchi approach	28
Effect of elevated temperature and stress state on ductile fracture behaviors in titanium alloy: Experiments and modeling	28
Balancing strength and ductility in a heterostructured CuCrFeNiMn high-entropy alloy	28
High-temperature compressive creep behavior and microstructural evolution mechanism of a selective electron beam melted TiAl alloy	28

Effect of cooling rate on the Morphological changes in the secondary γ' precipita	28
Rapid formation of the magnetocaloric phase in La-Fe-Co-Si magnetocaloric alloys for near room temperature applications	28
Discovering novel Ni-Mn-X based shape memory alloys with narrow thermal hysteresis: A strategy integrating first-principles calculations and machine learning	28
Significantly improved plasticity of Zr-based bulk metallic glass composites by introducing entangled porous Ta wires	28
Compressive creep behavior of high Nb containing TiAl alloy: Dynamic recrystallization and phase transformation	27
Effect of bonding temperature on the microstructure, IMCs growth, and shear property of Cu/Sn-9Zn-30Cu/Cu solder joint by transient liquid phase bonding	27
Microstructure and hydrogen sorption of severely deformed TaTiVCrFe and ZrTiVCrFe refractory high-entropy alloys	27
Large magnetocaloric effect in a ternary Laves phase compoundHo2Rh3Ge	27
Editorial Board	26
Effects of homogenization on the microstructural evolution of a novel Zr and Er containing Al–Mg–Zn alloy	26
Enhanced creep properties and creep-induced microstructure evolution behavior of carbon-doped TiAl alloys	26
Quaternary low melting point Sn-Bi-in-xGa solder with improved mechanical performance for advanced electronic packaging	26
Effects of annealing and cold rolling on microstructural features, magnetic properties, tensile behavior and electrical resistance of FeCoNi(MnAl)x high entropy alloys	26
Mg-modulated microstructure and enhanced superelasticity in TiNiZr shape memory alloys	25
Role of antisite disorder in the martensitic transition of Ni2−Mn1+Ga	25
Reactive spark plasma sintering of NiAl intermetallics: A comparative study	25
Influence of TiC contents on the microstructure, mechanical properties, and oxidation behavior of Mo–10Si–8B alloys	25
Novel ternary germanide with high palladium content CePd12Ge2	25
Percolation threshold of TCP clusters governs relaxation dynamics in Cu-Zr metallic glass-forming liquids	25
Relationship between the entropy of mixing, excess entropy and the shear viscosity of metallic glasses near the glass transition	25
Microstructure characterization and mechanical properties of electron beam welded joints of WRe alloy and CoCrFeNi high entropy alloys	25
Multi-precipitate synergetic strengthening in LPBF-fabricated maraging steel: Interplay of intermetallic compounds and oxide nanoparticles	25
Significant strengthening induced by heterogeneously generated widmanstätten structure in directional grains: Deformation behavior and strengthening mechanism	25
Editorial Board	25
Simulation-guided design of novel precipitation-strengthened eutectic high entropy alloy	25
Microstructures and properties of Crx-FeNiCu0.5Ti0.5 high-entropy alloys for corrosion resistance	25
Superplastic behavior of Al15(CuFeMn)85 immiscible medium-entropy alloy	25
Ultrasonic powder consolidation of metallic glass/Al-6061 composites	25
Competition between grain boundary migration and sliding in refractory high-entropy alloy induced by segregation and temperature	25
Accelerated biodegradation of Fe-30Mn-S biocomposite via preferential corrosion of secondary phase	25
Experimental investigation of minor Si addition on AlNiYCo multi-principal element alloy: Microstructural characterization, thermal stability and corrosion resistance	24
Effect of solution temperature on low-cycle fatigue behavior and microstructural evolution of GH4738 Ni-based superalloy	24
Developing centimeter-sized CuZr-based metallic glass composites via multi-element microalloying	23
Enhancing the mechanical properties of high Nb-TiAl composites by addition of nano-Y2O3 via induction hot-pressing sintering	23
Effects of annealing treatment on microstructure and mechanical properties of laser melting-deposited VCoNi medium-entropy alloy	23
Effect of L12 precipitate characteristics on the strength-corrosion trade-off in a CoCrNi-based medium-entropy alloy	23
A novel as-cast Ni42.6Fe24.6Cr16.4Al15.4Nb1 medium-entropy alloy with excellent mechanical properties from room to elevated temperatures	23
Contribution of coherent precipitates on mechanical properties of CoCrFeNiTi0.2 high-entropy alloy at room and cryogenic temperatures	23
Pulse current diffusion bonding of high niobium β-γ TiAl alloy to IN718 superalloy by introducing pure Ni interlayer	23
Directional design and preparation of Ti-Nb based alloys with predicted high strength and low modulus for biomedical applications: Insights from first-principles calculations	23
A comparative study on modeling the hot deformation behavior of titanium-containing CoCrFeNi high entropy alloy using constitutive equation and machine learning algorithms	23
Heat treatment-induced microstructure regulation of Fe-Si-B amorphous alloys: Enhanced electrocatalytic degradation of methylene blue and its mechanism	23
Microstructure evolution and characteristics of laser cladding with pre-placed powder lightweight refractory NbxMo0.5Ti1.5Ta0.2Cr high-entropy alloy	22
The role of Al addition on the hydrogen sorption properties of TiVZrNbHf high entropy alloy	22
Using multicomponent recycled electronic waste alloys to produce high entropy alloys	22
Simultaneously achieving good mechanical properties and low-field-actuated large reversible effective refrigeration capacity in a Ni-Co-Fe-Mn-In Heusler alloy	22
Tensile properties and deformation mechanisms of a fourth-generation nickel-based single crystal superalloy at intermediate temperatures	22
Effect of heat treatment on interfacial microstructure and mechanical properties of the aluminum/steel joints with copper transition layer	22
High corrosion resistance of nanograined and nanotwinned Al0.1CoCrFeNi high-entropy alloy processed by high-pressure torsion	22
The inadequacy of the traditional power law formula in predicting the growth kinetics of intermetallic compounds at the interface of solder joints in microelectronic packaging	21
Microstructure, frictional wear and corrosion properties of FeCrNiTiZrWMo high-entropy alloy coatings prepared by double glow plasma	21
Microstructure and mechanical properties of two novel scrap tolerant Al65Cu10Mg10Si10Zn5 and Al80Cu5Mg5Si5Zn5 high entropy aluminum alloys	21
Editorial Board	21
Ultrahigh strength and ductility combination in Al40Cr15Fe15Co15Ni15 triple-phase high entropy alloy	21
Improving tensile and impact properties of Fe50Mn30Co10Cr10 high entropy alloy via microstructural engineering	21
Investigation of interfacial microstructure and mechanical performance within TiAl to Ti2AlNb alloy vacuum diffusion bonded joints	21
Microstructural evolution and analysis of Zr–Co/Cu–Al glassy composites and crystallized alloys via indentation and MD simulations	21
Investigation of mechanical properties of Al3Zr intermetallics at room and elevated temperatures using nanoindentation	21
The impact of Al/Cr ratio on the oxidation kinetics of Y-doped AlCoCrFeNi high-entropy alloys at 1100 °C	21
Editorial Board	21
Editorial Board	21
Microstructure and mechanical properties of FeCoNiCrTix high entropy alloys by selective laser melting	20
Degradation kinetics and microscopic mechanism of DB6 dye by FeMnxCrNi multi-principal element alloys	20
Laser welding of dissimilar TiAl/Ti6-Al-4V materials: Effects of rapid in-situ laser pre-heating on microstructure and mechanical properties of the welding joint	20
Microstructure evolution and compression properties of NbTiV lightweight refractory medium entropy alloys with different Si contents	20
Roles of Cu in Fe-based soft magnetic nanocrystalline alloys with high Fe content	20
Interfacial intermetallic compounds formation at interface for joining selective laser melted and wrought Ti6Al4V alloy	20
Phase equilibria and thermodynamics assessment of the Co–Fe–Nb ternary system	20
The microstructure and mechanical properties of TLP bonding with (SnBiInZn)100-Ga high entropy alloys	20
The effect of microstructure evolution on the high-temperature mechanical properties and creep behavior of Y2O3-bearing alloy	20
Corrosion mechanism of CrMnFeCoNi high entropy alloy in nitric acid solution	20
Effect of stacking fault energy on the dynamic deformation behavior of Fex(CoCrNi)100-x high-entropy alloys	20
Multi-objective grey wolf optimization of selective laser melting process parameters for the fabrication of Al0.2CuFeMnNi high entropy alloy and evaluation of mechanical, tribological and corrosion be	20
Effect of room temperature rolling and annealing on microstructure and mechanical properties of (CrCoNi)96V4 medium entropy alloy	20
The influence of precipitates on the indentation creep behavior of (CoCrFeNi)94Ti2Al4 alloy	20
Effect of Ti and Mo content changes on microstructure and properties of laser cladding FeCoCrNiMn high entropy alloy coatings	20
In-situ synthesized Ti5Si3-Ti2AlC reinforced TiAl composite with enhanced tribological properties	20
Mechanical properties and high temperature structure evolution of FeCrAlMoNb high entropy alloy coatings with different Mo contents for accident tolerant fuel cladding	20
Pressure-induced nanoprecipitation and long-range order in a TiZrTaNbSn biomedical high-entropy alloy	19
Editorial Board	19

Transient liquid phase sintering with nanophase reinforcement enables silver joints with low thermal resistance and high shear strength	19
Nanoindentation creep mechanism of gradient ultrafine lamellar γ+Ni5Zr eutectic using electromagnetic levitation coupled with fall casting	19
Effect of hydrogenation on microstructure and mechanical properties of new zirconium alloy	19
Cryogenic-hydrogenation synergy for enhanced plasticity in a Zr-based bulk metallic glass	19
Corrosion behavior of the dual heterogeneous structured ferrous medium entropy alloy	19
Preparation of ultra-large intermetallic particles in Al alloys for accurate determination of their mechanical properties	19
Anisotropy in strain and microstructural evolution during superplastic deformation of an Al0.5CoCrFeNiCu high entropy alloy	19
A comprehensive study of microstructure, mechanical behavior, biocorrosion, and cytotoxicity of RF-PVD deposited Ti1.5ZrTa0.5Nb0.5X0.5 (X: Hf, Mo, and W) refractory high-entropy alloy films on 316L	19
Mechanical behavior of high entropy alloys with gyroid nanostructures	19
Effects of Ta/Nb/Ti addition on the microstructure and mechanical properties of novel CoNi-based superalloys fabricated by directed energy deposition	18
Effect of mechanical training on Ni-Mn-Ga-Cu-B porous shape memory alloy	18
Phase discretization induced nonlinear corrosion response mechanism of Al-Co-Cr-Fe-Ni high-entropy alloys prepared by laser cladding	18
Effects of Al2O3 on the microstructure and mechanical properties of the lightweight refractory medium entropy alloy coatings	18
Microstructure evolution and mechanical properties of directionally solidified Al0.5CoCr1.3FeNi1.3(Ti, Si, B, C)0.3 multiphase complex concentrated alloy	18
Editorial Board	18
A novel antioxidant strategy for refractory high-entropy alloys utilizing element diffusion along an ultrafine lamellar microstructure	18
Effect of laser shock peening on the plasticity of Zr-based metallic glass under compression	18
Exploring solidification behavior, strength and steam oxidation resistance of the René 125 nickel-based superalloy with a high-volume fraction of intermetallic γ’ phase	18
Magnetocaloric effect in ScGdTbDyHo high-entropy alloy: Impact of synthesis route	18
Coupling relationship between microstructure and high-temperature oxidation mechanism in alloying element-guided eutectic high-entropy alloys	18
Microstructure characteristics of a γ single-phase Ti-55Al-7.5Nb alloy fabricated via additive manufacturing	18
Investigation of elastic properties, anisotropy and edge dislocations of Ti3Al with tensor theory and bond matrix model	18
Broadening the working temperature interval in a magneto-structural coupled Ni–Mn–Ga microparticle via introducing a free surface	18
Development of new all–metal FeCoZrAl amorphous alloys for room–temperature magnetic refrigeration application	18
Enhanced mechanical properties of Nb-18.7Si alloy by addition of ceramic nano particles for microstructural control	17
High strain rate deformation behavior of Al0.65CoCrFe2Ni dual-phase high entropy alloy	17
Revealing the disparate defect evolution paths with loading rates for ductile and brittle metallic glasses via nanoscale creep	17
High Bs nanocrystalline alloy with excellent soft magnetic properties achieved based on regulating amorphous matrix structure via two-step annealing	17
Development of novel Fe-based bulk metallic glasses with excellent wear and corrosion resistance by adjusting the Cr and Mo contents	17
TiO2 nanofiber-derived in-situ Al2O3 particles reinforced TiAl matrix composites	17
Effect of vanadium content on microstructure, mechanical properties, and oxidation behavior of novel high temperature complex alloy	17
Excellent corrosion resistance of electron beam welded joint and remelted layer of eutectic high-entropy alloy AlCoCrFeNi2.1	17
Effect of initial microstructure on the properties of K439B nickel-based superalloy during prolonged aging at 800 °C	17
Multi-scale investigation on grain size effect of a powder metallurgy Ni-based superalloy based on simulation and experimental characterization	17
Positron annihilation study of open volume defects and Cr segregation in deformed CoCrFeMnNi alloy	17
Synergistically enhancing the strength and ductility of TiAl alloy through in-situ precipitation of Ti2AlC and TiB2 nanoparticles	17
High-temperature oxidation and diffusion studies on selected Al–Cr–Fe–Ni high-entropy alloys for potential application in thermal barrier coatings	17
The evolution and deterioration of the B2 phase and corresponding mechanical properties in the BCC/B2 refractory high-entropy superalloys	17
Dual-function, one-step design via Nb2AlC phase decomposition crafting wear-resistant core-shell FeCrCoNi high-entropy alloys	17
Creep behavior and deformation mechanisms of a fourth-generation Ni-based single crystal superalloy at intermediate temperatures	17
Observation of spin-gapless semiconducting behaviour around room temperature in Mn2CoSi/n-Si(100) structure	17
Microstructure and electrochemical performance of plasma sprayed Fe45Mn35Co10Cr10 high−entropy alloy coating in different corrosive solutions	17
Fractal analysis on the uniformity between the shear bands and serrated flows of a Zr-based bulk metallic glass	17
Mechanistic insights into direction-modulated electromigration failures and intermetallic formation in symmetric/asymmetric SnAg solder microbumps	17
Laser-deposited CoCrFeNiTiAlx high-entropy alloy coatings featuring balanced wear and corrosion resistance	17
Activation energy evolution during large-strain cyclic loading induced structural rejuvenation in a CuZr metallic glass	16
The role of σ and B2 phase precipitates on the strength and ductility of Al0.5CoCrFeNi high-entropy alloy	16
Effect of Bi on microstructure evolution of the Cr-Al-B MAB phase formed during hot-dip aluminizing and subsequent thermal diffusion treatment of Fe-Cr-B cast steel	16
Effect of suction casting and thermomechanical processing on the microstructure and martensitic transformation of a TiNiCuNb shape memory alloy	16
Microstructures and mechanical properties of Zr-based metallic glass composites plasticized with titanium wire mesh	16
Fabrication of structural and compositional heterostructured CoCrNi–CoCrFeMnNi multi-material using direct energy deposition additive manufacturing	16
Thermokinetics driven microstructural evolution during laser-based additive manufacturing of γ-TiAl alloy	16
Microstructure and wear resistance of multi-layer graphene doped AlCoCrFeNi2.1 high-entropy alloy self-lubricating coating prepared by laser cladding	16
Bauschinger effect on high entropy alloy under cyclic deformation	16
Reducing the environmental embrittlement effect of TiAl alloys exposed to air at high temperatures by a fine-grained surface structure	16
Dominance of the cubic Laves phase in the GdТAl substitutional compounds	16
Corrigendum to “The effect of ultrasound on the synergistic improvement of strength and plasticity of laser-cladded AlCoCrFeNi2.1 coatings” [Intermetallics 185 (2025) 108934]	16
V8SiB4 — A new ternary phase in the V–Si–B system	16
Effects of Ta addition on microstructure, compression and wear properties of CoCrNiTa medium entropy alloys	16
Influence of Cu and Si on the microstructure and properties of CoCrFeNiCu1-Si alloys	16
Editorial Board	16
Phase formation in the Ni-enriched zone below the surface oxide on NiTi	16
Environment dependent Ta-Mo synergy toward eutectic high-entropy alloys with strength and tunable corrosion resistance	16
High-speed impact behavior of cold-sprayed Fe-based amorphous particle on Mg alloy substrate	15
Editorial Board	15
Editorial Board	15
Drastic enhancement in hot-workability and microstructural refinement of TiAl alloys via martensitic transformation: A comparative study	15
Effect of static magnetic field on the chemical short-range order of CoCrFeMnNi high-entropy alloy prepared by laser powder bed fusion	15
Mo20Nb20Co20Cr20(Ti8Al8Si4) refractory high-entropy alloy coatings fabricated by electron beam cladding: Microstructure and wear resistance	15
The strain rate effect on strength behavior of CoCrNi medium entropy alloy up to 106 s−1	15
Strengthening metastable dual-phase Fe60Cr15Ni16Al9 complex concentrated alloy at cryogenic temperature by doping Ti and Mo	15
Formation mechanism of W2Zr intermetallic compound by solid-phase interdiffusion	15
Understanding the initiation and propagation of shear bands of amorphous Ca65Mg15Zn20 alloy by tracing method	15
Features engineered hardness and yield strength prediction of septenary refractory high-entropy alloys	15
Investigation of scale formation and degeneration of silicide coating on Nb–Si based alloy in the temperature range from 1250 °C to 1560 °C	15
Simulation and experimental investigation of grain structure, residual stress,γ′ phases in single crystal blade	15
AlFeCuCrNi high-entropy alloy-derived intermetallics and T6 heat treatment: Influence on microstructure and wear of Al6061 matrix composites	15
High uniformity of the mechanical properties of arc-melted WNbMoTaZr refractory high entropy alloy	15
Making a coherent L12-nano-precipitates-reinforced Ni-based alloy ultrastrong and ductile by constructing dual heterogeneous structures	15
A first-principles study of the mechanical and physical properties of Ni3Snx intermetallic compounds for high-temperature power device packaging	15
The effect of cellular reaction on mechanical behavior and microstructure evolution of β-solidified γ-TiAl based alloy during hot deformation	15
Beyond elemental intrinsic characteristics:	15
Study on microstructure and property of novel γ′-strengthened multi-component Co-based superalloys	15
The electronic structures, elastic and thermodynamic properties of alkali earth metal doped Ni3Ti intermetallics	15
Eutectic high-entropy interlayer combined with metallurgical reaction regulation synergistically suppresses precipitation of compounds in FGH96/IC10 TLP bonding	15
Insight into how Sn content and annealing temperature dictate microstructural characteristics to regulate the superelasticity in Ti-Zr-Nb-Sn alloys	15
High-temperature solid particle erosion characteristics and damage mechanism of AlxCoCrFeNiSi high-entropy alloy coatings prepared by laser cladding	15
The effects of Ti on the precipitation evolution and age-hardening behavior of Al–7Si–Mg alloy	15
Effects of Nb addition on the microstructure and martensitic transformation in NiTiHf-based high-temperature shape memory alloys	15
The role of Cu addition in the metallurgical features, mechanical properties, and cytocompatibility of cardiovascular stents biodegradable Zn-based alloy	15
Compositional control of chemical short-range order and yield strength in NiCoCr medium-entropy alloys	14
Dynamic mechanical relaxation behavior of TiZrHfCu-Ni/Be/NiBe high-entropy metallic glasses	14
Interfacial reaction and IMC growth kinetics at the Bi2Te3/Ag interface during isothermal aging	14
Synergistic enhancement of coercivity and thermal stability of nanocrystalline multi-main-phase Nd-Ce-Fe-B magnet via Gd60Y10Cu15Al15 addition	14
Investigation of glass forming ability, crystallization behavior, and soft magnetic properties of Fe–B–P–C–Cu alloy ribbons	14