Polymer Science Series A

Papers
(The TQCC of Polymer Science Series A is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Enzymatic Crosslinked Hydrogels for Biomedical Application29
Characterizing Attapulgite-Reinforced Nanocomposites of Poly(lactic acid)14
The Effect of Polymeric Inclusions and Nanofillers on Cure Kinetics of Epoxy Resin: A Review14
Polycaprolactone–Gelatin Membranes in Controlled Drug Delivery of 5-Fluorouracil12
Polymer-Clay Nanocomposites: Exfoliation and Intercalation of Organophilic Montmorillonite Nanofillers in Styrene–Limonene Copolymer11
A Review on Nanocomposites with Graphene Based Fillers in Poly(ether ether ketone)11
Reactor Powders of Ultra-high Molecular Weight Polyethylene for Solid-state Processing into High-strength Materials and Products10
New Amphiphilic Branched Copolymers of N-Vinylpyrrolidone with Methacrylic Acid for Biomedical Applications10
Rheological and Adhesion Properties of Hot-Melt Adhesives Based on Hydrocarbon Resins and Poly(ethylene-vinyl acetate)10
Block Copolymers in High-Frequency Electric Field: Mean-Field Approximation9
Hydrogels of Polysaccharide Carboxymethyl Hydroxypropyl Guar Crosslinked by Multivalent Metal Ions9
Effect of Boric Acid on the Structure and Properties of Borosiloxanes8
The structure and Electrical Properties of New Poly(benzaldehyde-co-thiophene)/SnO2 Composites8
Studies on Syntheses, Spectral, Thermal and Hydrophobic Behavior of Cardanol Based Tetra Functional Benzoxazines8
pH-Responsive Calcium Alginate Microspheres Modified with Chitosan for Immobilization of Antibiotic Cefotaxime8
Role of Poly(N-vinyl pyrrolidone) Grafted onto Poly(vinylidene fluoride) Powders in the Fabrication and Performance of Microfiltration Membranes7
Simulation of the Drift of a Macromolecular Ion in a Gas under the Action of an Electric Field7
Kinetics of Crystallization Mechanisms in High Density Polyethylene and Isotactic Polypropylene7
Conformational Changes of Polyelectrolyte Macromolecules on the Surface of Charged Prolate Metal Nanospheroid in Alternating Electric Field7
Atomic Force Microscopy of Biopolymers on Graphite Surfaces7
Effect of Exposure in Aqueous Medium at Elevated Temperature on the Structure of Nonwoven Materials Based on Polylactide and Natural Rubber7
On the Question of the Method for Determining the Critical pH Value during the Formation of Complexes between Nonionic Polymers and Polyacid in Aqueous Solutions6
Peculiarities of Dissolving Polyacrylonitrile Copolymer Containing Methylsulfo Groups in N-Methylmorpholine-N-Oxide6
Chitosan/Graphene Oxide/Nanocellulose Composites for Removal of Cu(II) and Pb(II) Ions in Aqueous Solution6
Molecular Dynamics Simulation of the Behavior of Protonated Poly(ethylene oxide)s in Drift Tube Experiments6
Characterizations and Properties of POM Toughened by Thermoplastic Polyamide Elastomer6
Citric Acid Cross-Linking of Chitosan Encapsulated Spearmint Oil for Antibacterial Cellulosic Fabric6
A Brief Overview of the Optimization of Dielectric Properties of PVDF and Its Copolymer-Based Nanocomposites as Energy Storage Materials6
Polyelectrolyte Complexes of Chitosan with Sodium Carboxymethyl Cellulose in Water–Alcohol Media and Microcapsules Based on Them6
Optical Sensor Applications of Carbazole Derivative Polymers Containing Different Aliphatic Groups Against Fe3+ Metal Ion5
Synthesis, Thermoresponsive Behavior, and Catalytic Properties of Amphiphilic Diblock Copolymers of N-Vinylcaprolactam and N-Vinylimidazole5
Controllable Poly(L-lactic acid) Soft Film with Respirability and Its Effect on Strawberry Preservation5
Artificial Nacre-based Chitosan/Graphene Oxide-Mg Hydrogel with Significant Mechanical Strength and Shape Memory Effect5
New Biodegradable Absorbents Based on Polylactide, Poly(3-hydroxybutyrate), and Chitosan for Sorption of Iron and Chromium Ions5
Study of Structural Characteristics of Regenerated Bacterial and Plant Cellulose5
A Study of Recycled Poly(butylene terephthalate) and Low-Density Polyethylene Blend5
Synthesis and Optimization of Thermoplastic Polyurethane/Polyaniline/Ferrite Cobalt Composite as an Effective Absorber in X-Band Region5
Features of the Behavior of a Polymer Solution Jet in Electrospinning4
Tribological, Mechanical, and Thermal Behavior of Titanium Dioxide and Graphene Nanoplatelet Embedded Epoxy Based Hybrid Nanocomposite4
Development of Paraffin-Based Shape-Stable Phase Change Material for Thermal Energy Storage4
Specific Features of the Structural Organization of Porphyrin-Containing Binary and Ternary Polymer Systems: X-Ray Diffraction and Atomic Force Microscopy Study4
Aqueous Solutions of Carboxymethyl Chitosan Mixtures with Methyl Cellulose and Composite Films on Their Basis4
Glass-Transition Temperature of Cyclic Polystyrene: A Computational Study4
Preparation and Properties of Cellulose Nanofiber-Reinforced Ionic Conductive Hydrogels Sensor4
Nonwoven Materials Based on Electrospun Ultrathin Fibers of Poly(3-hydroxybutyrate) and Complex Tin Chloride–Porphyrin4
Internal Friction in an Epoxy Polymer and a Fiberglass Reinforced Plastic Based on It4
Tailoring Chitosan Nanocomposites for Planar Optical Waveguide Applications4
Effect of Nanoscale Confinements on the Crystallization of Poly(ethylene oxide) in the Pores of Polyolefins Deformed by the Crazing Mechanism4
Structure Formation as a Method of Forming Physicomechanical Characteristics of Films Obtained from Aqueous Solutions of Certain Polysaccharides4
Memory Effect in Porous Polyethylene Films Preliminarily Deformed in the Medium of Supercritical CO24
Antimicrobial and Responsive Zwitterionic Polymer Based on Cysteine Methacrylate Synthesized via RAFT Polymerization4
Current Analysis of Huggins and Kraemer Plots for Determining the Intrinsic Viscosity of Macromolecules and the Corresponding Dimensionless Parameters4
Morphological Transitions in Solutions of Macromolecules with Solvophilic Backbone and Orientationally Mobile Solvophobic Side Groups3
On the Mechanism of Swelling of Gel-Type, Macroporous and Hypercrosslinked Copolymers of Styrene3
Investigation of the Binding of Lectins with Polymer Glycoconjugates and the Glycoconjugates Containing Silver Nanoparticles by Means of Optical Spectroscopy and Light Scattering3
Improvement in Crystallization and Toughness of Poly(L-lactide) by Melt Blending with Poly(L-lactide)-b-polyethylene glycol-b-poly(L-lactide) in the Presence of Chain Extender3
Effect of Oxidation Temperature on the Crystalline Phase of Polypropylene in Composites with Single-Walled Carbon Nanotubes3
Synthesis and Characterization of Eco-Friendly Waterborne Polyester-Urethane-Phosphorus Resin for Industrial Coil Coatings3
Effect of Acid Nature on the Solution Behavior of Methyl Cellulose Blends with Chitosan and Composite Films on Their Basis3
Mullins Effect and Its Reversibility for Thermoplastic Vulcanizates Based on Ethylene–Acrylic Acid Copolymer/Nitrile–Butadiene Rubber Blends3
Biodegradable Thermosensitive Injectable Poly(ε-caprolactone)–Poly(ethylene glycol)–Poly(ε-caprolactone) Based Hydrogels for Biomedical Applications3
Thermoplastic Elastomer for 3D Printing by Fused Deposition Modeling3
Chain Heterogeneity in Simulated Polymer Melts: Segment Orientational Autocorrelation Function3
Comonomer Effect on the Thermal, Morphological and Mechanical Properties of Poly(ethylene-co-octene)/Poly(ethylene-co-vinyl acetate) Blends3
Mechanical Properties of Anisotropic Magnetic Elastomers3
Electroconducting Polypyrrole Coatings as an Electrode Contact Material on Porous Poly(vinylidene fluoride) Piezofilm3
Influence of Distribution Anisotropy and Particle Shape on Magnetorheological Properties of Magnetoactive Elastomers3
Thermodynamic Compatibility of Polyacrylamide with Agarose: The Effect of Polysaccharide Chain Stiffness3
ATRP-tethering Anti-fouling/Anti-fogging Hydrophilic thin Hydrogel Layers on the Surface of Glass Slides3
Effect of Acid Dopants Toward Polyaniline Based Optical Sensor for Lead Detection3
Microstructure and Mechanical Strength Properties of Chitosan Sponges Obtained from Polymer Solutions in Carbonic Acid3
Influence of 3D Printing Conditions of Polyethylene Terephthalate Glycol on the Mechanical Properties of Products Based on It3
The Effect of Cellulose Nanocrystals and Acetylated Nanocellulose on the Crystallization Kinetics and Thermal Stability of Polylactic Acid3
Electrical and Optical Properties of Polypyrrole and Polyaniline Blends3
Effect of Compatibilization of Thermoplastic Polyurethane with Poly(lactic acid) for the Preparation of Sustainable Blends3
Electrical Conductivity of Chitosan/Dimethyl Amino Ethyl Methacrylate/Metal Composite Prepared by Gamma Radiation3
Biodegradable Polymer Compositions Based on Polyolefins3
A Review on Engineering of Poly(Glycidyl Methacrylate) Microspheres3
A Review on Polymeric Photoluminiscent Nanofibers: Inorganic, Organic and Perovskites Additives for Solid-State Lighting Application3
Influences of Molecular Structure on the Non-Isothermal Crystallization Behavior of β-Nucleated Isotactic Polypropylene3
A Study of Poly(butylene Terephthalate) and Thermoplastic Polyurethane2
Chitosan Wrapped Graphene/Polyurethane Composites with Improved Dielectric Properties for Capacitive Sensing2
Rheological Explosion in Polyethylenes with Different Chain Lengths2
Optical, Electrical and Thermal Behaviors of CaZnO2 Nanofillers Loaded PVP–PVA Nanocomposite Thick Films2
An Investigation on the Corrosion Protection of Mild Steel by Using the Conducting Polymer Polyaniline: Chemical and Electrochemical Studies2
Polyester Yarns Reinforced by Nanoclays2
Addition of Organo-Modified Nanoclay for Tuning the Microstructure, Thermal Stability, and Biodegradability of Poly(lactic acid)/Polycarbonate Immiscible Blends2
Construction of PDA@PAM-CMCNa-CaCl2 Vertical Porous Hydrogels for Solar-Powered Spontaneous Atmospheric Water Harvesting2
Rheological and Conformational Studies of Methylcellulose Gels in an Aqueous Medium2
Study on the Preparation and Adsorption Properties of Sodium Alginate Graft Polyacrylic Acid/Graphite Oxide Composite Hydrogel2
Poly(butylene succinate-co-butylene oxybisbenzoic) Esters with High Toughness: Synthesis, Characterization and Recovery Properties2
Rheological and Relaxational Properties of Mixed Solutions Based on Linear and Highly Branched Polyacrylonitrile2
Behavior of Cellulose–Poly(N-vinylpyrrolidone) Systems in N-Methylmorpholine-N-oxide and New Fibers on Their Basis2
Physicochemical, Sorption, and Morphological Characteristics of Bombyx Mori Silkworm Cocoon Fibroin and a Multifunctional Hemosorbent Obtained on Its Basis2
Preparation and Characterization of Polyoxymethlene/Thermoplastic Polyamide Elastomer Blends Compatibilized by Maleic Anhydride Grafted ABS Copolymer2
Distribution of Filler in Polymer Composites. Role of Particle Size and Concentration2
Recognition of Mn2+ Ion by Azine Based Fluorescent Chemo Sensor and Its Theoretical Investigation2
Fabrication of Novel Thermoplastic Vulcanizates Based on Ethylene-Vinyl Acetate Copolymer/Chloroprene Rubber with Heat-Triggered Shape Memory Behavior2
Transition Metal Dichalcogenides, Conducting Polymers, and Their Nanocomposites as Supercapacitor Electrode Materials2
Size Effects in Delamination of Poly(methyl methacrylate)–Acetone–Hexane Solution2
Preparation and Properties of Double Sensitive β-Cyclodextrin Hydrogel2
Modifying Effect of Polyethylene Fractions of Different Molecular Weights on the Morphology and Properties of Reactor Polymer Compositions Based on Ultrahigh Molecular Weight Polyethylene2
Designed Multi-Layer Structure Gradient Polymer: Structure Evolution and Damping Mechanism2
Structural and Thermal Properties of Polycaprolactone/PEG-Coated Zinc Oxide Nanocomposites2
Contribution to the Expansion of Low Density Polyethylene by the Use of Chemical Blowing Agents Based on Sodium Bicarbonate and/or Citric Acid2
New Film Composite Materials Based on Arabinogalactan2
Effect of Glass Fiber on the Tensile Strength of Poly(butylene terephthalate)/Polyamide 6 Blends2
Investigation of Structural and Optical Properties of Conductive Polymer Doped with Tin Oxide via in Situ Polymerization2
The Role of Intermolecular Entanglements in the Formation of Nanosized Pores during Deformation of Polyethylene: Atomistic Modeling2
The Effect of Physical State of Thymol on the Duration of Its Release from the Mixture with a Semicrystalline Polymer: Thermodynamic Aspects and Kinetics of the Process2
Structural–Morphological and Rheological Features of Joint Solutions of Cellulose and PAN Copolymer in N-Methylmorpholine-N-Oxide2
Influence of Salt Doping on the In Situ Synthesis of Zeolitic Imidazolate Framework-8 in Poly(diallyldimethylammonium chloride)/Poly(sodium-p-styrenesulfonate) Polyelectrolytes Complexes2
Structure and Temperature Induced Crystallization of Natural Rubber with Different Milling Times2
Synthesis and Gas Separation Properties of Metathesis Poly(5-perfluorobutyl-2-norbornene)2
Xanthan Gum and Lignin Grafted Chemically Crosslinked Hydrogels for Dye Removal: Synthesis, Characterization and Isotherms Studies2
0.076984167098999