Polymer Science Series A

Papers
(The median citation count of Polymer Science Series A is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
A Surprising Role of Ferromagnetic Ions in Poly(vinyl alcohol) Polymer Films as Novel Composites for Photo-Switches Applications18
Analysis of Influence Factors on Space Charge Accumulation Characteristics of 320 kV XLPE Cable18
Thermo- and pH-Sensitive Behavior of Copolymers of N-Vinylcaprolactam with N-Vinylimidazole16
Preparation of Dual-Network Conductive Hydrogels As Wearable Flexible Strain Sensors Using One-Pot Method and Soaking Strategy15
Extraction and Recovery of Polyethylenevinylacetate from a Silicon Solar Module Using the “Organic Solvent” Method and the Possibility of its Reuse15
Study of Properties of Polymer Film Materials Based on Polycaprolactone–Chitosan–Ceftriaxone Blends14
Sorption and Mechanical Characteristics of a Polymer Composite Based on Acrylic Hydrogel and Detonation Nanodiamonds and the Kinetics of Metronidazole Release from It13
Copolyaramide As a Barrier Material12
Cure, Mechanical, Swelling, Antimicrobial and Biodegradability Studies of Biocomposites of Acrylonitrile Butadiene Rubber and Chitosan11
The Effect of Magnetic Field on the Rheological Properties of Magnetic Fluids11
Structure–Property Relationship of Co-PI Film Made by Incorporating 1,2,4,5-Benzenetetracarboxylic Anhydride into 3,3',4,4'-Biphenyltetracarboxylic Dianhydride/P-Phenylenediamine11
Structure of Hydrocarbon Fluid and Couette Flows in Slit Pores with Pyrophyllite Walls11
An Advanced Water-Retaining and Anti-Erosion Soil Ameliorants Based on Xanthan Gum10
Polyacrylic Acid: A Biocompatible and Biodegradable Polymer for Controlled Drug Delivery9
Dielectric and Energy Storage Properties of BaTiO3/PVDF Composite Films Fabricated by a Spin-coating Process9
One-Pot Freezing-Thawing Preparation of Multifunctional Cellulose Nanocrystals/Poly(vinyl alcohol) Ionic Organohydrogel9
Molecular Dynamics Simulation of High-Field Effects in the Mobility of Protonated Poly(ethylene oxide)s in a Gas8
Rheological Properties of Polyphenylene Sulfone-Based Compositions as a Basis for Powder Injection Molding and 3D Printing Technology8
A Review on Engineering of Poly(Glycidyl Methacrylate) Microspheres8
Molecular Properties of Comb-Shaped Maleimide Copolymers in Dilute Solutions: Effect of Alkyl Side Chains8
Distribution of Filler in Polymer Composites. Role of Particle Size and Concentration8
Preparation of PVDF-g-PAA@Cu Hydrophilic Membrane by One-Step Gamma-Ray Irradiation and Its Antifouling and Bacteriostatic Properties7
Characterization of Thermal Conductivity of Cellulose Acetate/Nano-SiO2 Electrospun Nanofiber Composites for Energy-Saving Using an Oxygen-Enriched Method7
A Brief Overview of the Optimization of Dielectric Properties of PVDF and Its Copolymer-Based Nanocomposites as Energy Storage Materials7
Thermodynamics of Dissolution of TOPAS Polycycloolefins in Chloroform6
Silk Sericin Films from Concentrated Aqueous Solutions: Processing Routes, Structure, and Properties6
Preparation of Optical Antireflection Coatings with Three Different Types of Surface Morphologies6
Preparation of Composites Doped with Conducting Polymer, Characterization and Using Them in Adsorption of Some Radioactive Ions6
Structural Evolution and Electrical Property of Polyacrylonitrile-Based Nano and Micro Carbon Fibers6
Studies on Comonomer Compositional Distribution of Poly(L-lactic acid) Copolymers and Its Effect on the Thermal, Mechanical, and Oxygen Barrier Properties of Fractions6
Critical Analysis of the Results of Applying the Laser Method for Determining the Parameters of the Composite Model of the Chain Termination Rate Coefficient6
Self-Organization Initiated by Shear Flow of Mixtures of Polymer Melts6
Current Analysis of Huggins and Kraemer Plots for Determining the Intrinsic Viscosity of Macromolecules and the Corresponding Dimensionless Parameters6
A Comparative Study of the Mechanical and Rheological Properties of LDPE Composites with Various Nanocarbon Fillers5
Chlorosulfonated Polyethylene: Structural Features and Physicochemical Properties5
Insight to Cellulose–Polycarboxylic Acid Intermolecular Interactions Using TG and DSC Thermal Analysis Tools5
Thermal Fractionation of Polyolefins: Brief History, New Developments and Future Perspective5
Preparation of Ecofriendly Viable Packaging Films Based on Pectin and Agro-Waste: Thermal and Mechanical Studies by Design of Experiments Approach5
On the Separation of Peptides with Inverted Sequences5
Preparation and Properties of Superhydrophobic Composite Microspheres with Fluorescent Mosquito-Like Compound Eyes5
Recovered Carbon Black Filler Improves the Properties of Chitosan 3-Dimensional Composites5
Morphological Transitions in Solutions of Macromolecules with Solvophilic Backbone and Orientationally Mobile Solvophobic Side Groups5
Mechanical Properties of Nonequilibrium-Swollen Biopolymer Materials Based on Carboxyalkylated Chitosan Derivatives5
Analysis of the Stability of a Stretched Polymer Gel Thread5
Preparation and Properties of Cellulose Nanofiber-Reinforced Ionic Conductive Hydrogels Sensor5
The Effect of Cellulose Nanocrystals and Acetylated Nanocellulose on the Crystallization Kinetics and Thermal Stability of Polylactic Acid5
Isolation and Physicochemical Characteristics of Water-Soluble Polysaccharide from Locally Growing and Cultivated Basidium Raw Materials of Ganoderma lucidum4
Physicochemical Characterization of α-Chitin Whiskers-Reinforced Chitosan Nanocomposite Films4
Tailoring Chitosan Nanocomposites for Planar Optical Waveguide Applications4
The Interaction of Linear and Network Poly(diallyldimethylammonium chloride) with Water. Thermodynamic Experiment and Modeling4
Relationship between the Rheological and Molecular Structural Characteristics of Polypropylene4
Use of Guanidine-Containing Organomineral Complexes for Protection of Soft Polyvinyl Chloride Compounds from Photo- and Biodegradation4
Preparation of PVDF-g-PVP@GO Membrane by Homogeneous Solution Co-irradiation and Its Anti-Fouling Performance4
Molecular Properties of Protonated Diallylammonium Polymers Synthesized via Reversible Addition−Fragmentation Chain-Transfer Polymerization4
Viscoelastic and Mechanical Properties of Repair Epoxy Mortar from Modified Poly(ethylene terephthalate) Waste4
Effect of Composition of Nonionic and Cationic Copolymers of Alkoxyoligo(ethylene glycol) Methacrylates and Dodecyl Methacrylate on Their Properties in Solutions4
Piezoelectric Properties of the PVDF Track Membranes4
Determining Hansen Solubility Parameters by a Rotated Ellipsoid-Based Method3
Effect of Glass Fiber on the Tensile Strength of Poly(butylene terephthalate)/Polyamide 6 Blends3
Conductometric and Potentiometric Titration of Carboxyl Groups in Polymer Microspheres3
Preparation and Properties of Double Guest-Host and Covalent Crosslinked Anti-Freezing Organic Hydrogel3
Effect of Chirality of Phenylalanine in a Copolymer with L-Lysine on the Self-Assembly and Properties of the Resulting Nanoparticles3
Optical Sensor Applications of Carbazole Derivative Polymers Containing Different Aliphatic Groups Against Fe3+ Metal Ion3
Synthesis, Characterization, Application of PET Waste Blended with Hybrid Fibers and Preparation of Fiber Derived Unsaturated Resin3
Electroconductive Materials Based on Polylactide and Polypyrrole for Biomedical Applications3
Preparation of Hollow Fibers from Solutions of AB-poly(benzimidazole) in Phosphoric Acid3
ESR Investigation of the Interaction of Copper Nanoparticles Precursors with Polyethylenimine3
Preparation of Drug-Loaded Composites by Supercritical Carbon Dioxide Impregnation3
Influence of Distribution Anisotropy and Particle Shape on Magnetorheological Properties of Magnetoactive Elastomers3
Morphological Variation of the Poly(ε-caprolactone) Crystals in Bulk, Thin and Ultrathin Films of Poly(ε-caprolactone)/Poly(vinyl methyl ether) Blends2
Role of Poly(N-vinyl pyrrolidone) Grafted onto Poly(vinylidene fluoride) Powders in the Fabrication and Performance of Microfiltration Membranes2
Addition of Organo-Modified Nanoclay for Tuning the Microstructure, Thermal Stability, and Biodegradability of Poly(lactic acid)/Polycarbonate Immiscible Blends2
Dynamic-Mechanical and Rheological Properties of the Photo-Degraded Low-Density Polyethylene/Manganese Stearate/Trisilver Phosphate/Cadmium Selenide Composites2
New PBI Membranes Doped with Methyl-Imidazolium Triflate Protic Ionic Liquid2
Environmentally Friendly Bioplastic Films Based on Avocado Seeds Starch and Nanocellulose Fibers2
Complexes Based on Polyvinyl Alcohol and a Copolymer of Sodium Salts of Styrenesulfonic and Maleic Acids2
pH-Responsive Calcium Alginate Microspheres Modified with Chitosan for Immobilization of Antibiotic Cefotaxime2
Non-isothermal Crystallization Kinetics Behavior of Ethylene-vinyl Acetate Copolymer and Ethylene-vinyl Acetate Copolymer/Nitrile Butadiene Rubber/Liquid Nitrile Butadiene Rubber Thermoplastic Vulcani2
Compressive Failure of Polymer Composites Based on Graphene-Coated Particles2
Hydrodynamic and Conformational Behavior of N-Vinylformamide–Sodium 4-Styrenesulfonate Copolymers in Aqueous Solutions2
Fluoroelastomer-Induced Microcellular Structure in Polyolefin Elastomer Foams: a Pathway to Reduced Shrinkage and Enhanced Mechanical Properties2
Investigation on Structural, Electrical and Dielectric Properties of Polyaniline/ZrO2 Composite2
Synthesis and Gas Separation Properties of Metathesis Poly(5-perfluorobutyl-2-norbornene)2
Hydrogels Based on Interpolymer Complexes of Sodium Alginate and Synthetic Polyacids2
Peculiar Crystal Structure in Poly(ε-caprolactone) and Poly(ε-caprolactone)/Multi-Walled Carbon Nanotube Solvent-Cast Films2
Investigation on Morphological and Structural Evolution during Stretching Process of Polyethylene Terephthalate Glycol Films with Different Molecular Structures2
Preparation and Properties of Environmentally Adaptable Polyacrylamide/Polyvinyl Alcohol Semi-Interpenetrating Highly Conductive Ion-Conducting Hydrogel2
Mechanical Properties of Anisotropic Magnetic Elastomers2
Synthesis and Characterization of Gelatin-Based Nanoparticles for Potential Drug Delivery in Neurodegenerative Disease Treatment2
Construction of PDA@PAM-CMCNa-CaCl2 Vertical Porous Hydrogels for Solar-Powered Spontaneous Atmospheric Water Harvesting2
Efficient Dye Removal by SA-g-P(AA-co-NIPAM/BENT) Composite Hydrogel1
Research on Durability of Sealants Used in External Wall Joints of Prefabricated Concrete Buildings1
Influence of Deformation of Metal Matrix on the Mechanical Properties of Poly(Ethylene Terephthalate) Inside It1
Solid Polymer Electrolytes Based on Reactive Copolymers of Glycidyl Methacrylate with 2-Hydroxyethyl Methacrylate1
Tunable Optical and Electrical Properties of Poly(meta-aminophenol) via Doping with FeCl3 and I2 for Advanced Applications1
Rheological Properties and Swelling Kinetics of Hydrogels Based on Polymer Complexes of Pectin and Arabinogalactan1
Synthesis, Characterization and Cytotoxicity Analyzes of Novel ABA–Type PNIPAM-b-PLLA-b-PNIPAM Amphiphilic Block Copolymer1
Fabrication of Dual-Functional Micelles Based on Star-Shaped Copolymer for Bioimaging1
Methacrylate Single-Ion Conducting Block Copolymers: Effect of the Chemical Structure on Conductivity and Morphological Organization1
Synergistic Effects of Thermally Conductive Networks on Polymer Properties1
Investigation of Blends of Poly(Ether Ketone Ketone) with Polyphenylenesulfone1
Thermodynamics of Interaction between Poly(perfluorosulfonic acid) Nafion and Water1
Development of Bacterial Cellulose-Hyaluronic Acid Multicomponent Hydrogels via Click Chemistry for Biomedical Applications1
Hyaluronic Acid Modified Lutein Nanoparticles for Effective Application in Eye Drops: Development, Characterization, and Evaluation1
Nucleation Density from Isotropic and Self-Nucleated Melts of Isotactic Polystyrene: An Overview from the Molten to a Glassy State1
Effect of Thermoplastic Polyurethane on the Mechanical Properties and Structure of Poly(butylene terephthalate)/Thermoplastic Polyurethane Blend1
Molecular Dynamics Simulation of the Behavior of Protonated Poly(ethylene oxide)s in Drift Tube Experiments1
Physicochemical, Sorption, and Morphological Characteristics of Bombyx Mori Silkworm Cocoon Fibroin and a Multifunctional Hemosorbent Obtained on Its Basis1
Structure and Properties of Polypropylene Nanocomposites with Poly(Vinyl Alcohol) Prepared via Crazing1
Preparation of Composite Material Based on Poly(butylene succinate) with Montmorillonite for Bone Tissue Engineering Applications1
Comparative Study of Conformational Behavior and Hydrogen Bonding of Hydroxyl-terminated Carbosilane Dendrimers in Toluene and Aqueous Solution1
Self-Diffraction Characterization and Optical Limiting Behavior of the PAni/PVA Nanofiber1
Surface Molecularly Imprinted Polymer Based on ZIF-8 for selective Adsorption of Naringenin1
Removal of Cerium from Wastewater Based on Polymer-Enhanced Ultrafiltration Technology through Polyethersulfone-g-Poly(N-vinyl-2-pyrrolidone) Modified Membrane1
Novel Poly(N,N-dimethylaminoethylmethacrylate)-Based Amphiphilic Copolymers for Stabilization of Soil Materials1
Ion-Induced Gelation of Alginate in the Presence of Alanine Hydroximate Metallacrowns of Sr(II), Са(II), and La(III)1
A Comprehensive Study on Physical and Mechanical Properties of Glass/Basalt Short Fibre Reinforced Thermoplastic Composites1
Layer-by-Layer Deposition of Chitosan/Hyaluronic Acid Polyelectrolyte Complex Coatings onto Polyester Films1
Construction and Properties of New-Type Photo-Responsive Molecular Imprinting Materials1
Analysis of the Rheological Behavior of Solutions of Some Polysaccharides in Order to Optimize the Concentration of the Polymer in the Solution Used for the Preparation of Soft Dosage Forms in the For1
Surface Properties of Films of Linear-Dendritic Fluorinated Block Copolymers Based on N-isopropylacrylamide1
Energy of Salt Formation and Supramolecular Ordering of Chitosan L- and D-Ascorbates1
Investigation of the Hydration Dynamics of Various Types of Proton Exchange Membranes1
Synthesis and Characterization of Carrageenan/Polyaniline Film and Its Antibacterial Properties1
Effect of Oxidation Temperature on the Crystalline Phase of Polypropylene in Composites with Single-Walled Carbon Nanotubes1
Preparation and Characterization of Sodium Alginate-Polyvinyl Alcohol Electrospun Nanofibres Using Green Solvents for Biomedical Applications1
Effect of Morphogenesis of the Surface of Peptide Nanocomposites on their Structure and Properties1
Influence of Salt Doping on the In Situ Synthesis of Zeolitic Imidazolate Framework-8 in Poly(diallyldimethylammonium chloride)/Poly(sodium-p-styrenesulfonate) Polyelectrolytes Complexes1
Synthesis, Rheological Properties, and Hemocompatibility of Alginic Acid Modified with Ethylenediamine Fragments1
Structural–Morphological and Rheological Features of Joint Solutions of Cellulose and PAN Copolymer in N-Methylmorpholine-N-Oxide1
Binding of Curcumin to Star Polyoxazolines in Aqueous Solutions1
Effect of Heat-Setting Temperature on the Structure and Properties of BOPET Film1
Interpolyelectrolyte Complexes of Amphiphilic Polymers: The Case when a Synthesis Sequence Affects Properties1
The Effect of Aramid Fiber Powder Addition on the Performance of PES/AF Laser-Sintered Components1
Graphene Oxide Impacts the PMMA Characteristics1
Retraction Note: Characterization of Modified Styrene-co-2-acrylamido-2-methylpropane Sulfonic Acid Magnetite Nanoparticles1
Depolarization Relaxation Processes in Polyvinylidene Fluoride Films with Non-polar α-Crystalline Phase1
An Investigation on the Corrosion Protection of Mild Steel by Using the Conducting Polymer Polyaniline: Chemical and Electrochemical Studies1
Molecular-Conformation Parameters of Sodium Cellulose Sulfoacetate Chains1
Predicting the AC Conductivity of Nanocomposite Films using the Bagging Model1
Polymers with [2,2′-Biquinoline]-diyldimethanamine Units in the Main Chain and Their Metal–Polymer Complexes with Copper(I)1
Molecular Dynamics Simulation of the Conformational Structure of Polyampholyte Polypeptides at the Surface of a Charged Gold Nanoparticle in External Electric Field1
Bio-based Polymers: a Review on Processing and 3D Printing1
Effect of Glycerol Content in Gelatin/Glycerol Composite Films Loaded with Erythromycin1
0.058449029922485