Polymer International

Article	Citations
	214
Issue Information	122
Conjugated microporous polymers for task‐specific photocatalysis	55
Photocurable antibacterial bioadhesives derived from itaconated polyhydroxyurethane prepolymer and partially methacrylated tannic acid	50
Tribological and mechanical endowments of polyoxymethylene by liquid‐phase exfoliated graphene nanofiller	48
	42
Cationic bottlebrush brush polymers via sequential SI‐ROMP and SI‐ARGET‐ATRP	35
	34
Recent progress of elastomer–silica nanocomposites toward green tires: simulation and experiment	31
Vinylene‐linked conjugated polymeric frameworks derived from 2,2′‐bipyridine for visible‐light‐driven H 2	30
Overview of the challenges and current solutions in organic and hybrid coatings for historical monuments and architecture	28
Photothermal superhydrophobic anti‐icing coatings based on modified polypyrrole for cement concrete	27
Synthetic copolymers with natural product side‐chain pendents	26
Achieving bottle‐grade poly(ethylene terephthalate)‐like properties from blends of bottle‐grade and thermoform‐grade poly(ethylene terephthalate)	26
Effect of sodium 2‐acrylamido‐2‐methylpropanesulfonate on the structure and properties of thermoplastic polyvinyl alcohol copolymers	23
Thermo‐mechanical properties of epoxy composites filled with inorganic particulate fillers for robust solder mask application	22
Use of a Luffa cylindrica/polypyrrole composite for removing dyes from aqueous media	21
	20
Acrylic–CeO2 nanocomposite coatings for dual protection: enhancing weathering and corrosion resistance on metal and cement substrates	20
Styrene‐ethylene‐butylene‐styrene grafted maleic anhydride modified polyamide‐12: Printability and impact performance in fused granulate 3D printing	20
	20
In situ‐induced epiphytic crystallization of MC PA6 by self‐assembled nucleator and reinforcing effect	19
Super‐tough and excellent heat‐resistant poly( l ‐lactide) reinforced by silane‐functionalized MXene	19
Improved electrical actuation and dielectric strength of rubber composites with polydopamine noncovalent and silane covalent modification of carbon nanotube	19
Biodegradable polymer films: processability, technological properties and their viability for flexible packaging applications	18

Molecularly imprinted two‐dimensional photonic crystal hydrogel sensor for the detection of gatifloxacin	17
Electrospun conducting polymers: recent trends and the transition towards a sustainable future	16
Enhancing flame retardancy of poly(lactic acid) with a novel fully biobased flame retardant synthesized from phytic acid and cytosine	15
Biocompatible Pluronic F127 ‐coated nickel titanate nanoparticles: toward effective antimicrobial and antioxidant therapies	15
Synthesis of functional homo‐ and co‐oligomers of vinylpyrrole fused tetramethylpiperidine	15
Experimental evaluation of physicomechanical, tribological and optimality circumstances for Corchorus olitorius particle‐based composites	14
Reaction‐induced morphology control in block copolymers	14
Robust β‐myrcene block copolymer elastomeric vitrimers	14
Enhanced linear and nonlinear optical properties of poly(vinyl alcohol) films with manganese( III ) tetraphenylporphyrin chloride additive for optoel	14
Investigating the relationship between natural frequency and residual strength and stiffness of cross‐ply laminate under cyclic loading	14
Special Issue: Functional Polymers and Composites: From Synthesis to Applications (Dedicated to the 80th Anniversary of Professor George S. Georgiev)	13
Layer‐by‐layer preparation of electromagnetic NH2‐SiO2/polypyrrole/Ni nanocomposites, characterization and their electrochemical properties	13
Optimal integration of phase‐change microcapsules and nano‐silica for improving the strength of phase‐change concrete	12
Issue Information	12
Synthesis and characterization of perfluorocyclopentene‐thioether polymers	12
	12
Photoinduced cationic polymerization of β‐pinene: understanding the origin of chain transfer reaction	12
Poly(ether ketone ketone)/hollow silica filler substrates and application for sixth generation communication	12
Preparation, characterization and pork preservation of antibacterial chitosan composite film based on ethyl p ‐methoxycinnamate isolated from	12
Mechanical and biodegradation analysis under various environmental conditions of the waste vetiver root fiber reinforced soy composite	11
Halloysite nanoclay incorporated gelatine electrospun fibre for bio‐separations: synthesis, characterization and biological studies	11
Functional and physicochemical characterization of marine exopolysaccharide derived from the novel bacterium Algoriphagus sp. K5R and its application towards biomineraliza	11
Natural polymers for emerging technological applications: cellulose, lignin, shellac and silk	11
Design, synthesis and characterization of novel fluorinated polyimide membranes with bulky pendant for gas transport	11
The conformational statistics of amphiphilic polymers with distinct topological structures at the interface between two phases	11
Role of curing kinetics and thermodynamics in the thermal and mechanical properties of DGEBA / PEG	11
	10
Ternary nanocomposite of RAFT‐polymerized DMAEMA‐functionalized graphene oxide, manganese dioxide and polyaniline as active electrode material for supercapacitor	10
A toughening indole‐based epoxy film with efficient anti‐counterfeiting properties driven by cation–π interaction	10
Issue Information	10
Integration of multifunctional properties in polyester textiles through graphene‐derivative coating	10
Biodegradable composite from discarded hair keratin and graphene oxide with improved mechanical, thermal and barrier properties: an eco‐friendly solution to waste materials	10
Plasticizing effect of 1‐butyl‐3‐methylimidazolium bromide content on poly(vinyl alcohol)	10
Improving the characteristics, optical and electrical features of a biopolymer blend via silver– multiwalled carbon nanotu	10
Polymer type effect on microparticle blend of ethyl cellulose, poly(lactic‐co‐glycolic acid) and poly(ε‐caprolactone) for controlled drug delivery with varying solubility	10
Structure–property relations in semi‐crystalline combinatorial poly(urethane‐isocyanurate)‐type hydrogels	9
Can C–H nitrene functionalization of polyethylene be the future of ski racing?	9
Preparation of a water‐absorbent mesoporous material and film to simulate the infrared spectrum of plants	9
Chemically and biochemically responsive liquid crystal polymer networks and elastomers	9
Physicomechanical, water absorption and thermal properties and morphology of Paederia foetida fibe	9
Synthesis, kinetic study and characterization of C5‐dienes/styrene copolymers via living anionic polymerization in cyclopentyl methyl ether solvent	9
Copolymerisation of β‐butyrolactone and γ‐butyrolactone using yttrium amine bis(phenolate) catalysts	9
	9
Plastic pollution knows no bounds: polymers in outer space	9
Influence of fibre loading on the density, voids, dimensional resilience, tensile characteristics and thermomechanical behaviour of bamboo fibre and bio‐epoxy composites	9
	9
Issue Information	9
Special issue. Antimicrobial biopolymers: from synthesis to application	9
Rheological and tribological behavior of new 3D ‐printed poly(lactic acid) modified by ionic liquid	9
LiNO 3 ‐induced ionic conductivity and band gap modulation in alginate polymer electrolytes	9

Study of dielectric properties of Si‐B‐Zr/SiO2/FPI composites	9
Effects of ε‐polylysine or ε‐polylysine hydrochloride on the pH responsive ι‐carrageenan gel	9
Study of polycarbonate–polystyrene interfaces using scanning transmission electron microscopy spectrum imaging (STEM‐SI)	9
Polymeric sensors for blood analysis: current and future scope of research	8
Comparative analysis of sisal fiber treatments, CMC degree of substitution and nanoclay in corn thermoplastic starch	8
Multilayer biopolymer‐based flexible packaging films via layer‐by‐layer assembly: a comprehensive review	8
Behavior of melt electrospinning/blowing for polypropylene fiber fabrication	8
Uniaxial tensile‐induced deformation of spherulite: combining experimental and simulation methods	8
Issue Information	8
Performance improvement of carbon fiber‐reinforced ABS composites by introducing fullerene nanoparticles	8
Stimuli‐accelerated polymeric drug delivery systems	8
Ordered nanoassemblies from self‐assembly of amphiphilic molecule containing pillar[5]arene and azobenzene groups	8
Cover Image	8
Dual‐emission ratiometric fluorescence sensors based on silica, molecularly imprinted polymers and carbon quantum dots for high‐sensitivity and high‐selectivity detection of sulfadiazine	8
Enantio‐separation of (±)‐ibuprofen racemic mixture using functionalized molecularly imprinted resorcinol formaldehyde resin	8
Synthesis and properties of biomass‐based polymethacrylate comprising chitin‐derived 2‐acetamide‐2‐deoxyisosorbide as a repeat unit	8
Water‐in‐oil emulsion templating of isocyanates: end‐capping, foaming, porous structures and cell growth	7
Designing magnetic catalysts based on gold nanoparticles supported by ethylenediamine tetraacetic acid functionalized amino‐modified poly(	7
Evaluation and prediction of the tribological behavior of graphene nanoplatelet‐ and jute microfiller‐based bio‐epoxy hybrid composites	7
Fabrication of polylactide composites with silver nanoparticles by sputtering deposition and their antimicrobial and antiviral applications	7
Designing acrylic latexes for pressure‐sensitive adhesives: a review	7
	7
Organic photovoltaics: 30 years of the bulk heterojunction	7
Experimental study on the mechanical evolution for waste tire rubber powder‐modified asphalt and its mixture considering the temperature characteristics in seasonal freezing regions	7
Polymers in direct air capture: a mini review	7
Fine‐tuning in‐plane interdomain spacing of polystyrene‐b‐poly(ethene‐co‐butadiene)‐b‐polystyrene triblock copolymer adding monodisperse polystyrene	7
Insights into electrospun polymeric nanofiber mats: an innovative dressing for wound healing applications	7
Influence of crosslinker on the properties of terpene‐based poly(high internal phase emulsion)s	7
	7
A highly stretchable and conductive polydimethylsiloxane/nickel‐coated graphite composite prepared by a facile sedimentation method by adjusting interface effects	7
Dynamics and morphology of self‐assembly behavior of polymer‐grafted nanoparticles: a dissipative particle dynamics simulation study	7
Active biodegradable food packaging: effects of garlic essential oil incorporation on the degradation of cellulose acetate films in soil	7
Transport of penetrants in polymeric materials	7
Biobased alginate– PBAT blend films for sustainable packaging: overcoming the performance trade‐offs of ionic crosslinking	7
Enhanced electrical properties of cellulose–polyvinyl alcohol nanocomposites reinforced with BaFe 0.67 Ti 0.33	7
Synthesis of castor oil‐based polyols applicable in acrylated polyurethane coating with improved mechanical properties	7
Study on crystallization behavior and microstructure regulation of liquid crystal polymer films fabricated by rotational film blowing	7
An all‐polymer blend for photovoltaic applications: A combined photoabsorption, photoemission and ab initio	7
Dental composites: a comprehensive review on formulation, properties and recent developments	7
In situ alkali‐free growth of octahedral Ag2O nanoparticles by bacterial cellulose for efficient antibacterial application	7
The evaluation of the effect of metal oxide and ferroelectric ceramic additives on the structural and dielectric properties of epoxy matrix	6
Prof. Kai Zhang memorial	6
Effects of microstructures of liquid polyisoprene on the properties of styrene–butadiene rubber/butadiene rubber compounds	6
Iota‐carrageenan ( ???? C) hydrogel oscillations under constant electric field and stability diagrams	6
Dielectric relaxation studies of poly(ethylene oxide) with the addition of salt or nanofiller	6
Iron tailings/ammonium polyphosphate system in rigid polyurethane foam composites to enhance fire safety: a novel strategy for utilization of metallurgical solid waste	6
Polylactic acid (PLA) as a tolerant on the thermomechanical and compostability behaviour of poly(butylene adipate‐co‐terephthalate) (PBAT)/thermoplastic starch (TPS) blend	6
Synthesis of silver‐nanoparticle‐embedded polyphosphazene/polypyrrole nanocomposites and study of their morpho‐mechanical, flame‐retardant and conductivity behavior	6
Issue Information	6
Nonlinear kinetics and isotherm study of acid red 183 removal using chitosan and chitosan‐enhanced urea–formaldehyde resin	6
Issue Information	6
Nurturing a global choir of perspective	6
Self‐healing waterborne fluorinated polyurethane‐acrylate based on photoreversible reaction and hydrogen bonds	6
Cationic polyelectrolytes for fluoride remediation	6
Photochromic carbazole photoinitiators for precision visible‐light photopolymerization	6
Production of Flexible Piezoresistive Biomimetic Sensor from Cyprinus Carpio Scales	6
Upcycling waste plastics into 3D printing filaments for a circular and sustainable future	5
Structural design and simulation of a high‐performance P( VDF ‐ TrFE )‐based piezoelectric hydroac	5
Characterization of fluorescent poly(diallyldimethylammonium ion)–sulfonated rhodamine dye complexes and their interactions with chloride and carboxylate ions	5
Influence of aramid fibers modified by glycidyl polyhedral silsesquioxane assisted with supercritical carbon dioxide on the properties of aramid fiber‐reinforced styrene butadiene rubber composites	5
Issue Information	5
Enhanced mechanical energy‐harvesting performance of eggshell‐derived hydroxyapatite/polyurethane piezocomposites through mixture design approach: a promising route for advanced dielectric materials	5
Influence of copolymer composition on the properties of soluble poly(aniline‐co‐2‐[2‐chloro‐1‐methylbut‐2‐en‐1‐yl]aniline)s	5
Recycled silica as a renewable and sustainable alternative to carbon black in natural rubber foams	5
Use of exhausted biosorbent ash as ecofriendly filler in natural rubber	5
Synergistic effect of polymer‐modified rejuvenator and fresh asphalt on road performance of hot in‐place recycling styrene–butadiene–styrene‐modified asphalt mixtures	5
Improved thermal stability and flame‐retardant performance of rigid polyurethane foam modified by hydrolyzed keratin‐modified polyol and aluminium hypophosphite	5
Definitive screening design coupled with entropy‐weighted grey relational analysis for optimizing wear and strength of FDM PLA	5
Direct hydrogenation of nitrile butadiene rubber latex using M41 catalyst	5
Cellulose nanocomposite tough hydrogels: synergistic self‐healing, adhesive and strain‐sensitive properties	5
Chlorinated plastics offer unique opportunities and challenges in upcycling	5
	5
Enhanced methotrexate delivery and efficacy with probe‐sonicated chitosan nanoparticles	5
Advancements in molecularly‐imprinted‐polymer‐based biomarker detection for various diseases: a comprehensive overview	5
	5
Effect of sawdust fillers loaded on Cucumis sativus fiber‐reinforced polymer composite: a novel composite for lightweight static application	5
Co‐delivery of paclitaxel and CXCL1 shRNA via cationic polymeric micelles for synergistic therapy against ovarian cancer	5
Comprehensive analysis of fish collagen from Black Sea salmon (Salmo labrax) and Atlantic salmon (Salmo salar): isolation and comparative characterization for biome	5
Development of a high‐pressure infiltration process for phenol–formaldehyde matrix composites	5
Quercetin allylation and thiol–ene click photopolymerization to produce biobased polymer thermosets with robust thermomechanical properties	5

Issue Information	5
Issue Information	5
On the injection molding of thick‐walled thermoplastic vulcanizates: linking static and dynamic mechanical properties with morphology	5
Preparation of surfactant‐assisted polycaprolactone/κ‐carrageenan nanofibres	5
Binary nanoconjugation of zein–methylcellulose for improving curcumin properties: solubility, controlled release and anticancer activity	5
Sustainable nanocomposite coating for moulded pulp with enhanced barrier properties for food packaging applications	5
Synthesis and characterization of tough colorless poly(amide‐imide)s containing cyclohexanedicarbonyl chloride with different trans:cis ratios	4
Thermal decomposition analysis and combustion mechanism investigation of biomass‐based polyurethane	4
Influence of synthesis conditions and raw materials on the properties of N‐chlorosulfonamides immobilized on granular styrene–divinylbenzene polymer carriers	4
Tailoring high mechanical performances of self‐healable poly(vinyl alcohol)‐based elastomers via judicious grafting of side chains	4
Effects of stacking sequence and strain rate on flexural performance and energy absorption capability of continuous carbon fiber‐reinforced polymers via fused filament fabrication	4
A sustainable composite of whole pine needle biomass with succinic acid‐doped polyaniline for effective adsorption of anionic and cationic dyes	4
Impact of silanization on the characterization of Corchorus olitorius particle‐based composites for sustainable applications	4
Preparation and properties of β‐CD/P(AM‐co‐AA) composite hydrogel by frontal polymerization of ternary deep eutectic solvent	4
Sustainable biomaterials for tissue engineering: electrospun polycaprolactone fibers enriched with freshwater snail calcium carbonate and waste human hair keratin	4
Aggregation‐induced enhanced emission for quantification of recycled content in automotive plastics	4
Issue Information	4
Issue Information	4
A review on sustainable properties of plant fiber‐reinforced polymer composites: characteristics and properties	4
	4
A survey of recent publications on polymers employing reactive, halogen‐free flame‐retardant functionalities	4
Glycerol‐modified poly(vinyl alcohol)/poly(ethylene glycol) self‐healing hydrogel for artificial cartilage	4
New insights into transreaction mechanism between poly (ethylene terephthalate) and bisphenol A polycarbonate in melt	4
Self‐assembly of surfactin‐like polymer in solution by the dissipative particle dynamics method	4
Detailed analysis of termination kinetics in radical polymerization	4
A close look at polymer degree of crystallinity versus polymer crystalline quality	4
Digital light processing 3D printing of porous constructs via polymerization‐induced phase separation	4
Predicting the glass transition temperature and solubility parameter between rubber/silica and rubber/resins via all‐atom molecular dynamics simulation	4
Poly(lactide)‐based supramolecular polymers driven by self‐complementary quadruple hydrogen bonds: construction, crystallization and mechanical properties	4
	4
Toughening of thermoset matrix: effect of triblock copolymer addition and block sequence of PEG and PPG on phase morphology	4
Polyurethane foam materials and their industrial applications	4
Preparation and evaluation of various formulation effects of the second emulsion on the shape and release profile of propranolol HCl from ethyl cellulose microparticle blends	4
Investigations of flexible cycloalkyl substituents on pyridine‐imine based nickel( II )‐ and palladium( II	4
	4
Issue Information	4
Characterization of novel miswak and bioactive glass composites in various ratios	4
Kinetics of anionic polymerization of β‐myrcene in hydrocarbon solvents	4
Inorganic–organic polymer networks derived from a cyclic siloxane tetrafunctional glycidyl ether resin	4
Poly(2‐oxazoline)s: a comprehensive overview of polymer structures and their physical properties—an update	4
Self‐assembly of side‐chain liquid crystalline block copolymers to anisotropic polymeric nanoparticles	4
	4
Investigation of CO2 radio‐frequency plasma treatment on the functionalization and characterization of porous polycaprolactone films	4
	4
Utilisation of nanocellulose from cassava peels in polymer electrolyte membrane fabrication	4
Self‐assembled polypeptoid micelles from amphiphilic polypeptoid copolymers for drug delivery	4
Exploring the microstructural properties of hydroxypropyl‐methylcellulose‐based solid polymer electrolytes: a promising candidate for flexible electrical double‐layer capacitor	4
Utilization of an enormous waste produced by marigold flowers (Calendula officinalis) by its implementation in a polymer‐based matrix for hygiene application	4
Issue Information	4
Polymer‐based neuromorphic devices: resistive switches and organic electrochemical transistors	4
Free volume expansion in some polybutadiene–acrylonitrile rubbers: comparison between theory and experiments	3
Issue Information	3
Biodegradable polymer‐based hydrogel as a bioactive carrier for dermatological cosmetics and pharmaceutical applications	3
Development of rigid polyurethane foam incorporating phase change material for a low‐temperature thermal energy storage application	3
Waterborne polyurethane composite films using castor oil‐based polyol and graphene nanoplatelets: synthesis, characterization and antibacterial applications	3
Flexible wearable composite fabric for stable structural color and human movement monitoring under various ambient temperatures	3
Investigation of structural and optical properties of ternary polyaniline–polypyrrole–nickel oxide (PANI‐PPy‐NiO) nanocomposite for optoelectronic devices	3
	3
In situ reaction of modified cellulose nanocrystals in shape memory polyacrylamide/gelatin composite hydrogel with enhanced performance	3
Green polymer‐based materials as promising therapeutical agents for non‐communicable diseases	3
Epoxy–melamine–cenosphere hybrid composites: complete analysis for engineering applications	3
Synthesis of a cyclotriphosphazene derivative containing DOPO for simultaneous improvement in flame retardancy, toughness and strength of epoxy thermosets	3
Properties of polyrotaxane modified maleimide resin with a phase‐separated structure	3
Effect of carbon black on chitosan‐poly(methacrylic acid) semi‐interpenetrating network hydrogels in swelling and dye adsorption	3
Novel preparation of lithium‐ion battery wet‐processed separator based on the synergistic effect of porous skeleton nano‐Al2O3in situ blending and synchro‐draw	3
Synthesis of a silicon‐containing cyclotriphosphazene derivative for flame‐retardant modification of epoxy resin	3
Effect of hydrophobic nano‐silica/β‐nucleating agent on the crystallization behavior and mechanical properties of polypropylene random copolymers	3
	3
A tribute to Professor Dr Kai A. I. Zhang: pioneering advances in metal‐free polymeric photocatalysis	3
	3
	3
Multi‐step heating strategy during thermal stabilization of polyacrylonitrile multi‐filament bundle before carbonization	3
Investigation of the effect of chelating nitrogenous bases on click reactions on poly[(methyl acrylate)‐co‐(5‐azido‐1‐pentene)]	3
Issue Information	3
Exploring biofiber properties and their influence on biocomposite tensile properties	3
Competing crystallization behaviors and microstructural evolution in poly(trimethylene terephthalate)/poly(butylene terephthalate) blends	3
The blue fluorescence luminescence properties of hyperbranched polysiloxane containing halogen atom	3
Regenerated cellulose fabricated from oil palm biomass integrated with bismuth ferrite for methyl orange degradation	3
Special issue: visionary polymer research for a better world. The professor R.G. ‘Dick’ Jones commemorative issue	3
Study of β‐phase, dielectric and ferroelectric properties of graphene oxide‐reinforced poly[(vinylidene fluoride)‐co‐trifluoroethylene]‐based three‐phase composite films for energy stora	3
Design, fabrication and evaluation of amphiphilic hyaluronic acid conjugates as efficient carriers of 6‐thioguanine for in vitro anticancer drug delivery applications	3
Economical preparation of fluorine‐containing thermoplastic elastomer with good phase miscibility and elasticity based on dynamic vulcanization	3
Titanium oxide hydrates as versatile polymer crosslinkers and molecular‐hybrid formers	3
Issue Information	2
Data‐augmented machine learning for inverse design of homopolymers with targeted glass transition temperature	2
Issue Information	2
3D printing of lignin‐based polymeric composites obtained using liquid crystal display as a vat photopolymerization technique	2
Bioplastic: an eco‐friendly alternative to non‐biodegradable plastic	2
A selectivity‐enhanced colloidal crystal array for ribavirin sensing based on the synergistic effect of covalent and non‐covalent interactions	2
	2
Functionalized carbon nanotube and carbon nanodot modified multiblock poly(arylene ether ketone sulfone) copolymer as proton exchange composite membranes for fuel cell applications	2
TiO2‐doped sulfonated poly(etheretherketone)/poly(vinyl alcohol) blend membrane synthesis for microbial fuel cell systems	2
Influence of biochar and carbon black on natural rubber mixture properties	2
Issue Information	2
Preparation of biodegradable poly(lactic acid)/poly[(butylene diglycolate)‐co‐furandicarboxylate] blends with excellent toughness and gas barrier performance	2