Proceedings of the Institution of Mechanical Engineers Part A-Journal

Article	Citations
Assessment of the Newcomen engine’s development potential as heat engine for low temperature waste heat	34
Influence of runner eccentricity on the hydraulic performance of tubular turbine: A comparative case study	26
Evaluating of the effect of the cavitation-vortex interaction on the energy conversion in a two-stage LNG cryogenic submerged pump	22
Analysis of vortex combustion flow in a chamber o f guide ring coupling with swirl flow	17
Resource adequacy and capacity Procurement: Metrics and decision support analysis	15
Modeling, sensitivity analysis, and multi-objective optimization of a humidification-dehumidification-desalination system	14
Wind power forecasting based on a novel time series Dynamic context-aware power forecasting model	13
Investigation of energy loss characteristics of solid-liquid flow in centrifugal pumps under different flow conditions	12
Pressure characteristics and identification method of water hammer in single phase and two phases with entrapped air during pump startup	12
Innovative heat dissipation solution for air-cooled battery pack using stair-step arrangement	11
Performance evaluation of Photovoltaic–Thermal (PVT) systems with different heat transfer fluids: Theoretical modeling and experimental validation	11
Optimization of squirrel-cage induction motor design for EV applications through FEM simulations with ANSYS	10
Secondary air induced flow structures and their interplay with the temperature field in fixed bed combustors	10
Optimization of the design of a heavy-duty gas turbine intake air volute using the surrogate model method	10
Heat and mass transfer process simulation and structure design of a water-cooled fin solid metal hydride storage system	10
Double-hole film cooling on a turbine blade under varying blowing ratios and turbulence intensities: A numerical study	10
Calibration of parameters and predictive control strategy of a wind turbine for improvement of energy harvesting	9
Effect of different axial deflected angles of reversed blade-angle slots on the axial flow compressor performance and stability	9
Experimental investigation of evolution characteristics tip flow instability in a centrifugal compressor with a vaneless diffuser	9
Numerical analysis of the internal biased flow mechanism of the siphon outlet pipe under the action of axial flow pump	9
Numerical study of marine high temperature film cooling endwall with particle deposition on mesh morphing	9
Influence of eccentric impeller on pressure pulsation of large-scale vaned-voluted centrifugal pump	8
Characterization of bifacial technology Pv systems	8
A numerical study on effect of intra and inter spaced winding configuration on performance of oil forced transformer cooling system	8
Influence of trailing edge flap length and deflection angle on the performance of the multiphase pump	8

Experimental investigation on spray and flame characteristics of a marine diesel engine with single and double injection	8
Thermal performance improvement on winglet tip of a turbine stage under engine condition-part I: Winglet geometry modifications	7
Investigation of suction pressure pulsation prediction of rotary compressor with total variation diminishing scheme and one-dimensional accumulator model	7
Numerical analysis of rim seal flow in gas turbine secondary air systems with hot gas ingestion and vane cooling	7
Comparative exergetic sustainability analysis of subcritical and supercritical organic Rankine cycle plants for a waste heat recovery application	7
Understanding of the asymmetric twin-stroll radial turbine under steady and pulsating inlet conditions	7
Transient thermodynamic and parametric analysis of solar-assisted Rankine cycle	7
Numerical and experimental investigation of 3D unsteady flow fields of a low head axial flow turbine under different blade number	7
Robust estimation of lithium-ion battery state of health based on electro-thermal features and machine learning	7
The multi-objective optimisation design of outlet guide vanes of diagonal flow fan based on sobol sensitivity analysis	6
Comparative performance analysis of solar module types in automated solar power plants using multi objective optimization	6
Numerical investigations of mass-flux redistribution and performance prediction model on coupling effects of total pressure distortion-low Reynolds number in axial compressor	6
Multi-objective shape optimization of siphon outlet in pumping station considering two-phase flow	6
Flow characteristics of a centrifugal fan with optimized edge curvatures of an impeller front disk	6
Influence of tip clearance inclination on the performance of axial flow impeller in storage mode	6
Influence of vortex interactions on the exergy transfer and performance of OWC wells turbine	6
Optimising the thicknesses of porous transport layers of a PEM fuel cell	5
Two-stage identification algorithm for battery state of health models	5
Dynamic coupling effects of injection on spray and mixture formation in an asymmetrically vibrating combustion engine	5
Causality analysis of meteorologically sensitive in offshore wind power generation based on the time-lagged convergent cross mapping	5
Efficiency analysis and heating structure design of high power electromagnetic thermal energy storage system	5
Analytical modeling and performance improvement of an electric two-stage centrifugal compressor for fuel cell vehicles	5
Impact of non-uniform incoming flow from intermediate cooling systems on second-stage centrifugal compressors: Insights from three-dimensional spatiotemporal coupled simulation	5
Study on fluid flow as well as heat transfer characteristics of high-speed solid-rotor motor cooled by natural gas based on turbulent Taylor-Couette vortex	5
Thermofluid process simulation of wet biomass and ammonia co-firing in an industrial watertube boiler	5
Optimizing energy management in renewable hybrid water pumping systems: A sustainability alternative for agricultural irrigation	5
The self-excited thermoacoustic instability behavior of a premixed hedge combustor with an elbow-connection or T-shape supply system	5
Influence of the spanwise grooves on aerodynamic characteristics of the compressor cascade and rotor under different reynolds numbers	5
Prediction of the remaining useful life of lithium-ion battery based on particle filter-long short term memory network	5
Numerical investigation of clocking effect on unsteady fluid flow in vicinity of tongue for centrifugal pump with vaned diffuser	5
Comparative analysis of the performance of small H-Darrieus for different pitch control strategies	5
Study on energy conversion characteristics and pressure fluctuation interference characteristics between two stage impellers of the pump as turbine	5
Influence of jumping-droplet condensation on the properties of separated flow in an air-cooled condenser tube: An Euler-Lagrange approach	5
ANFIS-based predictive control for photovoltaic systems under partial shading conditions	5
Thermal simulation of gas engine driven heat-source tower heat pump	5
Numerical investigation on vortex cooling flow and heat transfer characteristics for gas turbine blade with variable coolant chamber cross-sectional shapes	4
Erratum to “Characteristics of the axial compressor with different stator gaps in compressed air energy storage system”	4
Numerical study on the influence of inlet distortion on integrated nacelle fans based on coupling crosswind and angle of attack	4
Investigation of the internal flow characteristics of a mixed-flow pump in the hump region	4
Fast multi-objective optimization design of gas turbine L-inlet duct	4
Effect of side dilution jets on the velocity field and mixing in swirl and bluff-body stabilised annular confined flows	4
Availability monitoring and improvement method for in-service nuclear power plants based on high-precision prediction of availability	4
Integrated aerodynamic optimization for stationary components of squirrel cage fan Considering impeller-Volute interaction	4
A study of the effects of housing tongue design on radial turbine performance	4
Experimental and numerical comparisons among various skewed blades of low speed axial fan rotors	4
Mechanism analysis and uncertainty quantification of blade thickness deviation on rotor performance	4
Numerical investigation on conjugate heat transfer characteristics of film and vortex composite cooling under rotating conditions	4
Effect of inlet geometric distortion on the aerodynamic performance of a multistage compressor	4
Exploration of the mechanism and prediction of jet pump feature structure optimization for the enhanced pumping performance	4
Experimental study of renewable hydro powered tyre piston pumps for water supply and a case for application of similitude theory	4

Thermal performance of nanofluids in a sinusoidal channel with embedded porous region	4
Study on the abnormal noise and control strategy in hydropower units	4
Numerical study on cavitation flow and induced pressure fluctuation characteristics of centrifugal pump	4
Research on the optimization method of energy consumption of helical surface machining considering spindle vibration	4
A novel neural network method of aerodynamic performance prediction for wind turbine airfoils under glaze ice conditions	4
Effect of twisted blade roots on the performance and internal flow of non-volute centrifugal fan	4
Wind turbine power prediction via deep neural network using hybrid approach	4
Energy-based wind vibration control of turbines equipped with nonlinear tuned mass damper inerter considering soil-structure interaction	4
Part-load performance of a pure H 2 /O 2 gas turbine cooled by steam from a bottoming-cycle	3
Numerical investigation on the combined effects of pinching and rotation on the performance of a high-speed centrifugal compressor with a vaneless diffuser	3
A combined experimental and computational investigation of an inducer’s characteristics with gas-water two-phase flow	3
Experimental and numerical study on the influence of pneumatic parameters on the flow structure in trapped vortex combustor	3
Enhancing efficiency in CO 2 scroll compressors: A data-driven optimization approach incorporating clearance tolerance	3
Domain-adapted explainability for machine learning predictions of rotodynamic pump degradation in safety-critical industrial sectors	3
Numerical and experimental analysis of guide vane pivot torque prediction in the reversible pump-turbine	3
Assessment of the effectiveness of ventilation for gas turbine generator set safety	3
Aerodynamic design and evaluation of a ducted fan lift system for vertical takeoff and landing flying cars	3
Series vs. Parallel connections in BIPV arrays: A performance-based assessment under different irradiance scenarios	3
Thermal exergo-economic investigation of heat exchanger assisted with inserts under CQD nanofluid	3
Advanced exergoeconomics of a steam power plant based on double-tier splitting of exergy destruction rates	3
Numerical investigation of performance of an interdigitated polymer electrolyte membrane fuel cell with a porous rib	3
Integrated reed valves applicable to miniature high pressure compressor and investigation on their dynamic characteristics based on equivalent model	3
Performance enhancement of solar photovoltaic modules using graphene-enhanced Glauber’s salt eutectic phase change material for advanced thermal management	3
A genetic programming approach for the prediction of solar chimney power plant power	3
Effect of the relative radial position of the flow components on the exchange flow characteristics of a regenerative flow pump	3
Utilizing artificial intelligence to develop an advanced compressor airfoil family for industrial, aero-derivative, and heavy-duty gas turbines	3
GA-optimized cascade control strategy of DFIG-Based twin-rotor wind turbines	3
Demand-side frequency regulation of power grids using inverter-based thermostatically controlled loads	3
Thermal‐hydraulic investigation of a proposed concept for a passive containment cooling system and evaluation of heat exchanger performance	3
Thermo-hydraulic performance augmentation in residential heating applications using a novel multi-fluid heat exchanger with helical coil tube insertion	3
Enhanced heat transfer in a tube with fish scale bionic rib	3
Adaptive model predictive control for constant speed regulation of an accumulator-assisted hydromotor drive under varying load conditions	3
Investigation of turbulent flow in vortex cold-wall combustion chamber under different spark ignition times	3
Numerical investigation of H2/Air fueled micro combustion characteristics with trapezoidal ribs for micro thermophotovoltaic applications: Effect of rib height	3
Rotordynamic characteristics of a novel labyrinth seal with partition walls and helical groove teeth	3
Optimization of low-head shaft tubular pumping systems based on entropy production theory	3
A two-dimensional method for radial turbine volute design	2
Experimental analysis of combustion and emission characteristics in hydrogen-enriched industrial premixed burners	2
Investigation on NO reduction behavior within complex atmosphere during pilot ignition of low calorific gas	2
Numerical study of heat transfer and pressure drop of nanofluids in a combined porous media of hydrophobic and hydrophilic surfaces	2
Study on pressure pulsation characteristics of a variable-speed circulating model pump	2
Effects of blade solidity on the transient start-up characteristics of pipeline-type spherical hydraulic turbine	2
Techno-economic analysis of 500 MWe supercritical thermal power plant with the integration of solid oxide fuel cell	2
Groove shape effects on the performance of dry gas seals in supercritical CO 2 centrifugal compressors	2
Investigating the onset and steady-state conditions of a diaphragm thermoacoustic stirling engine	2
A novel degree-hour method for rational design loading	2
Investigation into the influence of combustion system based upon tumble flow on engine performance of opposed-piston two-stroke engine	2
An energy-saving control method of NH 3 /CO 2 cascade refrigeration systems by data-driven models	2
Efficient design and optimization of multi-stage axial flow gas turbine using data mining technology	2
Numerical studies of rounded-dimple effect on unsteady film cooling and heat transfer performances for cutback surface at turbine vane trailing edge	2
Entropy generation rate analysis of turbocharger radial flow compressor in range from surge to choke	2
Performance improvement of horizontal axis wind turbines using curved gurney flap: 3D numerical investigation	2
Investigation of wind turbine blade defects using hybrid YOLOv8 and vision transformer	2
Loss-induced performance degradation mechanisms in vertical-axis wind turbines: A comparative failure-based study to identify the optimal configuration	2
LOF-based early warning method for battery inconsistency considering dynamic threshold in electric vehicles	2
Film cooling characteristics of trench film hole fed by the internal cross-flow	2
3E evaluation of a cascade PCM-based solar cooling system for meeting different cooling loads	2
Synergistic mechanism of the energy dissipation and sediment erosion in pump turbine under sand-laden water based on entropy production theory	2
Analysis of unsteady flow and pressure pulsation of multistage centrifugal pump based on actual size	2
Enhanced external heat transfer in innovative helical coil designs: Experimental and numerical evaluation	2
Improved performance of Kalina cycle system 11 cycle with new arrangement of ejector cycle	2
Transient flow and noise characteristics of vortex-turbulence-noise interaction in centrifugal pump	2
A novel active power control strategy in islanded multifrequency microgrid based on source cost and availability	2
Implementation of heat transfer techniques for an axial flux permanent magnet generator design	2
Exergoeconomic analysis of the gas turbine-supercritical CO 2 -ORC combined cycle	2
Deep neural network based digital twin framework for per-day energy extraction in partially illuminated photovoltaic systems	2
Secondary air induced flow structures and mixing in a fixed bed combustor	2
Influence of aspect ratio on aerodynamic and mechanical design of compressor inlet stage in heavy-duty gas turbines	2
Experimental investigation into the effect of main stage swirl on flow and spray characteristics inside a stratified partially premixed combustor	2
Fault diagnosis of wind turbine based on multi-signal CNN-GRU model	2
Transient hydraulic characteristics during emergency shutdown of vertical shaft tubular pump	2
Book review: Radial flow turbocompressors	2
Pulverized coal combustion computational modeling approach: A review	2
One dimensional approach to predict the performance of high pressure multi-stage axial turbine considering air cooling and diffuser performance	2
Research on efficiency optimization of cyclone pump impellers based on genetic algorithms	2
Analysis of reactants flow rates in a Proton Exchange Membrane fuel cell’s performance through computational modelling	2
Investigation of energy loss mechanism of shroud region in A mixed-flow pump under stall conditions	2
Modeling the co-combustion of bi-fuel blends in a drop tube furnace: A numerical approach	2
Effect of parasitic losses on the design optimization of inward flow radial supercritical CO 2 turbines	2
Thermodynamic modeling and analysis of a hybrid supercritical (scCO 2 ) power and refrigeration cycle using different refrigerants	2

Radiated noise from cavitation bubble volume pulsation in a shaftless pump-jet propulsor	2
Numerical research on the aerodynamic performance of inlet volute duct for a heavy-duty gas turbine	2
Incrementally trained short-term wind turbine power prediction model based on long short-term memory	2
Numerical analysis of catalyst particle deposition characteristics in a flue gas turbine with an improved particle motion and deposition model	2
Investigation of non-axisymmetric endwall contouring in a high loaded turbine stator cascade	2
Mathematical study of the forced convection mixed mode solar dryer for cotton drying and response surface techniques	2
Numerical simulation on vortex structure within a magnetic vortex pump with numerous short straight blades	1
Influence of real gas properties on aerodynamic stability of a SCO 2 centrifugal compressor	1
Combined effect of temperature difference across interface and finite size of the ions on interdiffusion in SOFC	1
Study on modeling test method and the critical Reynolds number of a micro centrifugal pump	1
Numerical study on the effect of different internal angled ribs on the external film cooling performance	1
Heat transfer and flow characteristics of a novel turbulator design in heat exchanger: Experimental and numerical analysis	1
Techno-economic analysis of thermal energy storage systems	1
Robustness analysis and performance comparison of a novel intelligent frost identification methods for air-source heat pump based on gray-level Co-occurrence matrix	1
Fully developed forced convection H 2 O - CuO na	1
Investigation of V-down staggered rib roughness for improved solar air heater efficiency: An experimental analysis	1
Experimental study on the heat transfer performance and dimensionless correlations for R134a spray cooling system	1
Numerical study of a three-dimensional ramp flow field for proton exchange membrane fuel cells (PEMFC)	1
Site-specific considerations for aerodynamic design upgrade of a wind turbine operating in a saharan environment	1
The effect of wake vortex on the unsteady characteristics of tip leakage flow in a high-loading counter-rotating compressor	1
Experimental and Numerical Optimization Study on an Airfoil-Shaped Heat Exchanger	1
Enhancing the performance of a reversible axial fan through various arrangements of dielectric barrier discharge plasma actuators: A 3D CFD study	1
An integrated data-driven surrogate model and thermofluid network-based model of a 620 MW e	1
Study on the effect of solar salt thermal decomposition reaction on internal and external characteristics of molten salt pump	1
Experimental and ANN-based analysis of thermo-hydraulic-exergetic performance in a three-fluid heat exchanger with two thermal communication systems	1
Energy loss mechanism of a full tubular pump under reverse power generation conditions using entropy production theory	1
Multi-objective statistical optimization of parabolic trough collector systems using Taguchi, analysis of variance and grey relational analysis methods	1
Investigation on novel natural gas fueled homogeneous charge compression ignition engine based combined power and cooling system	1
Thermal performance investigations by the use of nanofluids and phase change materials (PCM) in parabolic trough collectors (PTC) along with exergetic, economic, and application-based analyses	1
Performance enhancement of solar air heater using hybrid methods: Focused review on current progress, challenges, and future opportunities with ribs, jets, and nanocoatings	1
Convective heat transfer improvement for a horizontal grooved surface by the piezo-fan integration	1
Energy and exergy analysis of latent heat storage with heat pipe encased in phase change material	1
Hybrid machine learning and EKF based pipeline for lithium ion battery SoH estimation	1
Flow structures and heat transfer characteristics in a vaneless counter-rotating turbine cavity with different cooling inflows	1
Flow characteristics of tangential and radial leakage in algebraic spiral variable cross-section electric scroll compressors	1
Performance evaluation and comparative study on a novel solar-heat-driven ejection-compression hybrid cooling system with subcooling storage	1
LSTM forecasting for long-term MHP performance in irrigation: A feasibility study	1
CFD modelling on flow field characteristics of engine cooling water jacket and its cooling performance improvement based on coolant transport path analysis method	1
Control of free-piston Stirling generator system using SVPWM and advanced sliding mode techniques	1
The hydrodynamic characteristics analysis of a centrifugal pump with the impeller angular misalignment fault	1
Experimental study on the aerodynamic performance of variable geometry low-pressure turbine adjustable guide vanes	1
Numerical investigation on the spanwise chord distribution effects on the performance of an H-darrieus vertical axis wind turbines	1
A techno-economic analysis and cost optimization pathway for solar thermal Desiccant-IEC cooling systems in tropical climates using Monte Carlo simulation	1
Conjugated investigation on the effect of rotation on the leading-edge impingement structures with and without film-cooling holes	1
A new method for reciprocating compressor fault diagnosis based on indicator diagram feature extraction	1
Microwave application as an alternative method to increase the efficiency of PtC catalyst in PEMFCs	1
Influence of manufacturing errors on the aerodynamic working stability of axial flow compressors	1
Lyapunov-based energy optimization for hybrid renewable energy system for coastal area	1
Optimization on manifold injection in DI diesel engine fuelled with acetylene	1
Reliability-based design optimization and working capability quantification for a double-suction centrifugal fan subject to ambient temperature uncertainty	1
Schlieren and mie-scattering visualization of an evaporating spray under marine diesel engine conditions	1
Experimental investigation on swirling annular liquid film breakup characteristics of prefilming airblast atomizer	1
Turbine vane endwall aerothermal and film cooling performance considering realistic swirling inflow conditions	1
Development of machine-learning models to determine the power of natural gas/hydrogen spark ignition engines	1
Three-dimensional multiphysics modelling and performance evaluation of proton exchange membrane fuel cells (PEMFCs) for sustainable energy applications	1
A reduced-dimensional evolutionary framework for modeling supercritical power plants	1
Cooling characteristics of dilution holes in can-type combustor of micro gas turbine	1
Effects of unstable flow structures on energy transfer mechanism in a centrifugal pump	1
Numerical investigation on the impact of injection rates on cooling performance in a rotor-stator cavity with liquid nitrogen spraying	1
Adaptive high-order sliding mode control for proton exchange membrane fuel cell air-feed system based on high-gain observer	1
Optimized XGBoost framework for RUL prediction of lithium-ion batteries using multi health indicators	1
Inverse design optimization of the compressor cascade airfoil assisted by active subspace approach	1
Research on unsteady flow characteristics of turbocharger turbine stage with coupling inlet and exhaust casings	1
Thermal performance of three concentrating collectors with bifacial PV cells. Part II – parametrical study	1
Book review: Radial flow turbocompressors	1
Multi-field coupling analysis and comparative testing of miniature involute scroll plates with varied base circles	1
Numerical investigation of turbulent flow in Pelton turbine injector and jet quality	1
A review of the research status of scroll expander	1
Effect of wear damage on aero-thermal performance of the film-cooled squealer tip in a turbine stage	1
A novel experimental control method to suppress instability in a centrifugal compressor with two counter and co-rotating rotors	1
Experimental study on the effects of residual carbon on ash fusion characteristics of high-alkali Zhundong coal under deep oxygen-staged condition	1
Experimental and numerical investigations on the thermal performance over corrugated surfaces with different wave shapes induced by piezoelectric fan	1
Research on inner flow and energy characteristics of air ejector for liquid-ring vacuum pump	1
Transient flow and thermodynamics analysis of a scroll compressor based on CFD	1
Optimization design of axial flow fan blades for V-type condenser based on dynamic MSST-PANS model correction and surrogate model	1
Effects of inclined squealer rims on tip leakage vortex and loss in a transonic axial turbine	1
An overview of the current and future trends in the design and performance of lithium-ion battery packs for electric vehicles	1
A DTW-STIRPAT-Monte Carlo model for carbon emission prediction and dual-carbon pathway in Chongqing	1
Studies on fuels and engine attributes powered by bio-diesel and bio-oil derived from stone apple seed ( Aegle marmelos ) for bioenergy	1
Effect of fin length and angle on the melting process of phase change materials in vertical latent heat storage unit	1
Spray cooling heat transfer enhancement using graphene nanofluids: An experimental approach	1
Performance analysis of a solar air heater equipped with inverted arrow-shaped ribs	1
Analysis of hydro-abrasive erosion in a high-head Pelton turbine injector using a Eulerian-Lagrangian approach	1