Engineering Analysis With Boundary Elements

Papers
(The median citation count of Engineering Analysis With Boundary Elements is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Buckling analysis of thin plates using direct interpolation boundary element method141
An improved SPH scheme for the 3D FEI (Fluid-Elastomer Interaction) problem of aircraft tire spray75
Consolidation behaviors of gas-bearing sediments with modulus varying along depth under horizontal loads69
Numerical simulation of dual-tube heat exchanger equipped with an innovative turbulator containing two-phase hybrid nanofluid: Hydrodynamic and exergy analysis69
A non-iterative methodology to reconstruct boundary shapes and conditions in isotropic linear elasticity based on the BEM68
Numerical assessment of the nanocomposite sector annular plates with the aim of promoting their mixed-form thermal shock response64
Multilayered elastic medium reinforced with interfacial thin film: A theoretical model for geogrid reinforced HIR asphalt pavement62
Effect of polycaprolactone percentage on thermal and mechanical behavior of polyurethane/polycaprolactone/graphene oxide nanocomposite utilizing molecular dynamics simulation61
Multi-grid methods of stable generalized finite element methods for interface problems60
Stability analysis of hybrid laminated cylindrical shells reinforced with shape memory fibers57
Droplet generation by the oscillation of two spark-generated bubbles near a confined opening56
Editorial Board54
Numerical study on slag accumulation in solid rocket motor with a new Lagrangian-Euler coupled particle computational framework54
Force/motion transmissibility analysis and parameters optimization of hybrid mechanisms with prescribed workspace51
Hybrid method of space-time and Houbolt methods for solving linear time-dependent problems50
Static and dynamic analysis of plane elasticity using complex Fourier manifold method based on numerical improvement of Gauss–Legendre quadrature techniques47
Expression of Concern: Utilization of various waste sources in Saudi Arabia as a new clean and renewable energy source: Adsorption of phenol pollutants and removal from Petroleum industrial wastes via47
Expression of Concern: Molecular dynamics method for targeting α-synuclein aggregation induced Parkinson's disease using boron nitride nanostructures44
Generalized finite difference method (GFDM) based analysis for subsurface flow problems in anisotropic formation44
Expression of Concern: High-Efficiency Perovskite Photovoltaic System Performance by Molecular Dynamics Method: Optimizing Electron Transport Thicknesses, Hole Transport, and Anti-Reflector Layers of 44
A reduced-order peridynamic differential operator for unsteady convection–diffusion problems43
Efficient kinematic upper-bound limit analysis for hole/inclusion problems by adaptive XIGA with locally refined NURBS43
Properties optimisation of nanostructures via machine learning: Progress and perspective42
The radial point interpolation method and mixed-mode energy release rate criterion for crack growth in single lap joints42
A meshless method based on the method of fundamental solution for time harmonic electromagnetic field with a three-dimensional elastic body42
Efficient surface reconstruction for SPH method and its application to simulation of solid-solid contact and fluid-rigid body interaction41
Discontinuous deformation analysis (DDA) simulations of rock fracturing failures by Voronoi sub-block elements with refinement41
Nonlocal modelling of temperature-dependent electrochemical corrosion using peridynamic operator method40
Numerical modelling of CO2 leakage through fractured caprock using an extended numerical manifold method38
Band structure analysis of two-dimensional photonic crystals using the wavelet-based boundary element method38
Numerical analysis of mechanical behavior of stratified rocks containing a single flaw by utilizing the particle flow code38
A NURBS-enhanced semi-analytical method for nonlinear liquid sloshing analysis in liquid storage structures with various baffles38
Computational modelling of the basic creep of concrete: An image-based meso-scale approach38
Waste-to-Energy in Saudi Arabia: Treatment of petroleum wastewaters utilizing zeolite structures in the removal of phenol pollutants by using the power of molecular dynamics method37
Localized RBF methods for modeling infiltration using the Kirchhoff-transformed Richards equation37
Scaled boundary finite element based two-level learning approach for structural flaw identification37
Vibrations of skew cylindrical shells made of FG-GPLRCs under rapid surface heating36
Study on meso‑mechanical properties and failure mechanism of soil-rock mixture based on SPH model36
Application of Sherman-Morrison formula in adaptive analysis by BEM35
A novel hybrid boundary element for polygonal holes with rounded corners in two-dimensional anisotropic elastic solids35
A localized hybrid kernel meshless technique for solving the fractional Rayleigh–Stokes problem for an edge in a viscoelastic fluid35
Isogeometric methods for thermal analysis with spatially varying thermal conductivity under general boundary and other constraints35
Time-domain multiple traces boundary integral formulation for acoustic wave scattering in 2D35
Numerical simulation of the damage and ignition responses of high explosives under low-velocity impact using the SPH method35
Generalized finite difference method for solving the bending problem of variable thickness thin plate34
Efficient solution of block Toeplitz systems with multiple right-hand sides arising from a periodic boundary element formulation34
Investigation of the shear band evolution in soil-rock mixture using the assumed enhanced strain method with the meshes of improved numerical manifold method34
Motor magnetic field analysis using the edge-based smooth finite element method (ES-FEM)34
An efficient reduced basis approach using enhanced meshfree and combined approximation for large deformation34
The virtual element method for rock mass with frictional cracks33
Analytical and meshless DQM approaches to free vibration analysis of symmetric FGM porous nanobeams with piezoelectric effect33
Review on nanofluids and machine learning applications for thermoelectric energy conversion in renewable energy systems33
Mixed boundary-value problems and dynamic impedance functions due to vibrations of a rigid disc on a thermoelastic transversely isotropic half-space33
Boundary element method for bending-extension coupling shear deformable laminated composite plates with multiple stiffeners33
Numerical study of the effects of twisted-tape inserts on heat transfer parameters and pressure drop across a tube carrying Graphene Oxide nanofluid: An optimization by implementation of Artificial Ne33
Numerical study of flow-induced noise response of lightweight composite sandwich sail based on the boundary element method33
Coupled particle and mesh method in an Euler frame for unsteady flows around the pitching airfoil33
Essential insights into particle interfaces: From arbitrary switching FEM-PD coupling to effective mitigating surface effects33
A modified bond-based peridynamic model without limitations on elastic properties32
Vibrational characteristics of fastening of a spherical shell with a coupled conical-conical shells strengthened with nanocomposite sandwiches contained agglomerated CNT face layers and GNP core under32
A pseudospectral contact mechanics simulation of microindentation in two slip systems activated single crystalline material by using a homographic conformal mapping32
A Novel Nonlinear Elasticity Approach for Analysis of Nonlinear and Hyperelastic Structures32
A DEM parameters calibration method for three-dimensional model of the lunar rock based on the approximate model32
Numerical modelling of compressible hyperelasticity via smoothed state-based peridynamics32
Editorial Board31
A simple meshfree method based on Trefftz attitude for 2D and 3D elasticity problems31
Editorial Board31
Fictitious finite integration method for solving high order partial differential equations31
Study on copper-stainless steel explosive welding for nuclear fusion by generalized interpolated material point method and experiments30
Stabilized solution of the 3-D MHD flow problem with FEM–BEM coupling approach30
A meshless solution of the compressible viscous flow in axisymmetric tubes with varying cross-sections30
Nonlocal general particle dynamics for fluid-structure interaction problems considering the structural failure30
Corrigendum to “Polyharmonic splines interpolation on scattered data in 2D and 3D with applications” [Engineering Analysis with Boundary Elements 156 (2023) 240-250]30
Effects of magnetic field on natural convective heat transfer of nanofluid flow in a two-dimensional rectangular cavity in the presence of constant-temperature triangular blades on the bottom wall30
Nonlinear dynamics of nanocomposite beam-like aerospace structures30
Modeling of rarefied gas flows in streamwise periodic channels: Application of coupled constitutive relations and the method of fundamental solutions30
Numerical modeling of the damage mechanism of concrete-soil multilayered medium subjected to underground explosion using the GPU-accelerated SPH29
An efficient moving pseudo-boundary MFS for void detection29
Isogeometric boundary element formulation for cathodic protection of amphibious vehicles29
Numerical and machine learning approaches in nanofluid natural convection flow in a wavy cavity29
A reduced-order model based on integrated radial basis functions with partition of unity method for option pricing under jump–diffusion models29
Artificial neural network joined with lattice Boltzmann method to study the effects of MHD on the slip velocity of FMWNT/water nanofluid flow inside a microchannel28
Stable numerical algorithm with localized radial basis function for solution of fractional convection–diffusion–reaction equation28
The impact of using a turbulator at the nanofluid flow inlet to cool a solar panel in the presence of phase change materials using artificial intelligence28
A local collocation method with radial basis functions for an electrospinning problem27
RETRACTED: Analyzing geometric parameters in inclined enclosures filled with magnetic nanofluid using artificial neural networks27
Flexoelectricity in bimaterials via boundary element analysis26
An improved high order smoothed particle hydrodynamics method for numerical simulations of selective laser melting process26
Self-propulsion performance prediction in calm water based on RANS/TEBEM coupling method26
A local meshless numerical scheme based on the radial point interpolation for the generalized time-fractional Allen–Cahn equation26
Application of Chebyshev-based GDQ and Newmark methods to viscothermoelasticity responses of FG composite annular systems26
Meshless boundary integral quadrature method for calculating the conduction shape factor of exchanger tubes containing slits26
RETRACTED: Utilization of machine learning and neural networks to optimize the enclosure angle, magnetic field, and radiation parameter for mixed convection of hybrid nanofluid flow next to assess env26
A meshfree method with gradient smoothing for free vibration and buckling analysis of a strain gradient thin plate25
Free vibration analysis of laminated doubly-curved shells with arbitrary material orientation distribution employing higher order theories and differential quadrature method25
Simulation of electromagnetic wave propagations in negative index materials by the localized RBF-collocation method25
The modified CUF-EFG method for the dynamic analysis of GPLs-CNTs-reinforced FG multilayer thick cylindrical shells under shock loadings: A modified meshless implementation25
Multiscale SPH simulations of viscoelastic injection molding processes based on bead-spring chain model24
A simple staggered approach for comprehensive analysis of forced convection heat transfer using the improved element-free Galerkin–reduced integration penalty method to solve the fluid dynamics proble24
Expression of Concern: Investigating the Effect of SiO2 Nanoparticle Addition and Thickness of Face-Coverings on COVID-19 Protection Using Molecular Dynamics Approach24
Symplectic time-domain finite element method for solving dynamic impact and crack propagation problems in peridynamics24
Optimisation of open pit slope design considering groundwater effects using particle swarm optimisation and scaled boundary finite element method24
Acceleration of a wave-structure interaction solver by the Parareal method24
A 2D equivalent linear inversion model of bedrock motions in a layered transversely isotropic half-space24
Comment on “Modeling groundwater flow with random hydraulic conductivity using radial basis function partition of unity method” by Shile et al. (2024)24
Editorial Board24
Retraction notice to “Meshfree vibrational scrutiny of arbitrary placed straight triple-wire-nanosystems carrying direct electric currents using surface elasticity theory” [Engineering Analysis with B24
Editorial Board23
An efficient coupled fluid flow-geomechanics model for capturing the dynamic behavior of fracture systems in tight porous media23
Shear deformable plate by SGBEM: Indirect “progenitor matrix” approach23
Editorial Board23
Editorial Board23
Application of defined auxiliary system in the method of layer potentials for solving the stokes flow problem23
Stable node-based smoothed radial point interpolation method for the dynamic analysis of the hygro-thermo-magneto-electro-elastic coupling problem22
Analytically-integrated radial integration PBEM for solving three-dimensional steady heat conduction problems22
A transformation method evaluate for near singular boundary integrals in the structural analysis of thin structure22
BEM modelling of a hydrodynamic lifting surface working in ground proximity22
Effectiveness of meshless methods for advection dominant groundwater contaminant transport problems22
Explicit edge-based smoothed numerical manifold method for transient dynamic modeling of two-dimensional stationary cracks22
NURBS-boundary-based quadtree scaled boundary finite element method study for irregular design domain22
An accurate and efficient numerical method for neural field models with transmission delays22
Are the direct and indirect BEM/BIEMs equivalent?22
Adaptive sinh transformation Gaussian quadrature for 2D potential problems using deep learning22
Neural network-based DPIM for uncertainty quantification of imperfect cylindrical stiffened shells with multiple random parameters21
Three-dimensional mesoscale analysis of the dynamic tensile behavior of concrete with heterogeneous mesostructure21
Size-dependent dynamic stability of nanocomposite enriched micro-shell panels in thermal environment using the modified couple stress theory21
A bio-inspired remodelling algorithm combined with a natural neighbour meshless method to obtain optimized functionally graded materials21
Efficient simulation of two-dimensional time-fractional Navier–Stokes equations using RBF-FD approach21
Three-dimensional fundamental solution for dynamic responses of a layered transversely isotropic saturated half-space using coupled thin-layer and complex frequency shifted perfectly matched layer met21
FO-PINN: A First-Order formulation for Physics-Informed Neural Networks21
A centroid-enriched strain-smoothed radial point interpolation method for nearly incompressible elastoplastic problems in solid mechanics21
Editorial Board21
RETRACTED: Analysis of Conocurvone, Ganoderic acid A and Oleuropein molecules against the main protease molecule of COVID-19 by in silico approaches: Molecular dynamics docking studies21
An enhanced computational approach for multi-physics coupling analysis of active phased array antenna21
Two-dimensional radial integration displacement discontinuity method with high-order isoparametric elements21
The solution of elastodynamic problems using modified radial integration boundary element method (MRIBEM)21
Method of fundamental solution using Erdogan's solution: Static and dynamic21
A nonconforming surface mesh generation method by binary tree21
A free-surface particle regularization scheme based on numerical integration for particle methods21
Thermomechanical phase change peridynamic model for welding analysis20
Maximizing the projection/minimizing the mass gap to choose optimal source points in the MFS for 2D and 3D Laplace equations20
Numerical analysis of two-phase nanofluid flow on the thermal efficiency of a circular heat sink for cooling of LEDs20
Implementation of a dual interpolation boundary face method by discontinuous meshes20
On the numerical solution to a Solow model with spatial diffusion and technology-induced capital mobility20
Expression of Concern: Novel study of perovskite materials and the use of biomaterials to further solar cell application in the built environment: A molecular dynamic study20
Nano-jet impingement cooling of a sinusoidal wavy hot surface by using an oriented L-shaped object under magnetic field with two phase mixture formulation20
A fully explicit incompressible Smoothed Particle Hydrodynamics method for multiphase flow problems20
Coupled stretching-bending boundary element analysis for unsymmetric magneto-electro-elastic laminates with multiple holes, cracks and inclusions20
Reduced-order models for array structures mounted on platforms with parameters variations20
Air Drag Effect on Dynamic Analysis of Moving Nanoparticle Problems using Meshfree Finite Volume Method20
Expression of Concern: Investigating the atomic and thermal performance of Soy biodiesel methyl ester in the presence of hybrid CuO/Al2O3 nanoparticles by molecular dynamics simulation20
Machine learning calculation model for hydrodynamic lubrication characteristics of a miter gate bottom pivot20
Numerical analysis of honeycomb-shaped polymeric foams using the FEM and the RPIM20
Meshless analysis for cracked shallow shell20
Vibrational development of nanocomposite cylindrical shells by employing reduced graphene oxide (rGO) as a nanoscale strengthener19
A new general analytical PBEM for solving three-dimensional transient nonlinear heat conduction problems with spatially-varying heat generation19
On the phase-field algorithm for distinguishing connected regions in digital model19
Hybrid fundamental-solution-based FEM for thermal analysis of cellular materials containing non-smooth holes19
Meshfree methods for nonlinear equilibrium radiation diffusion equation19
On the free and forced vibrations of porous GPL reinforced composite conical panels using a Legendre-Ritz method19
Drug release using nanoparticles in the cancer cells on 2-D materials in order to target drug delivery: A numerical simulation via molecular dynamics method19
Frictional, thermal, and total entropy generation of two-phase nanofluid turbulent flow in a circular heatsink: A numerical study19
Deep Interface Alternation Method (DIAM) based on domain decomposition for solving elliptic interface problems19
Meshless generalized finite difference method with a domain-selection method for solving degenerate boundary problems19
An efficient variational multiscale element free Galerkin method based on adaptive TR-AB2 scheme for convection–diffusion equations18
Dynamic responses of a plate on layered transversely isotropic poroelastic subgrade under moving thermal and mechanical loads18
Numerical investigations with eXtended isogeometric boundary element analysis (XIBEM) for direct and inverse Helmholtz acoustic problems18
A supervised learning algorithm to simulate tumor growth: Cahn–Hilliard model on surfaces18
The method of fundamental solutions for the high frequency acoustic-elastic problem and its relationship to a pure acoustic problem18
Melting and solidification analysis of paraffin phase change material in a circular space, molecular dynamics simulation18
A simple particle–spring method for capturing the continuous–discontinuous processes of brittle materials18
Method of fundamental solution for thin plate resting on elastic foundation with in-plane forces18
Rockburst proneness analysis of rock materials based on the discrete element method17
DNN-HDG: A deep learning hybridized discontinuous Galerkin method for solving some elliptic problems17
Expression of Concern: A Molecular Dynamics Simulation on Corrosion, Wear, and Mechanical Properties of Laminated Al/TiC Composites17
Green’s function representation and numerical approximation of the two-dimensional stochastic Stokes equation17
Transient numerical study on injecting PCM in buildings along with extra comfort ventilation: Use of artificial neural network to decline energy utilization17
A boundary-type algorithm based on the discrete ordinates for neutron transport equation17
Applications of machine learning techniques in energy systems integrated with phase change materials-A concise review17
B-spline convected particle domain interpolation method17
An electro-mechanical shell model for predicting stochastic vibration behavior of smart piezoelectric structure utilizing the Spectral-Tchebyche method17
Coupled Newmark beta and GDQ methods with a hybrid adaptive neuro-fuzzy for electromechanical energy absorption of microsystem17
Expression of Concern: The possibility of availing active and passive methods to achieve a flow with desirable characteristics via using the lattice Boltzmann method17
An efficient flux-reconstructed lattice boltzmann flux solver for flow interaction of multi-structure with curved boundary17
Analysis of the vibration mitigation effects of pile barrier in unsaturated ground using the coupled BE and FE method17
A nodal integration based two level local projection meshfree stabilization method for convection diffusion problems17
Galerkin finite block method with Lagrange multipliers method for cracked solids in functionally graded materials17
Pixel-based boundary element method for computing effective thermal conductivity of heterogeneous materials17
Isogeometric approach for thermal buckling analysis of FG graphene platelet reinforced composite trapezoidally corrugated laminated panels17
Uncertainty analysis of static fatigue of Hi-Nicalon bundles17
Editorial Board17
Analysis of the first and second laws of thermodynamics for MHD two-phase natural convection of water/Fe2O3 ferro-nanofluids in a 3D baffled enclosure17
Dynamic analysis of functionally graded sandwich beams using a semi-analytic method named scaled boundary finite element method17
Addressing arbitrary body forces in 2D elasticity coupling the Radial Basis Integration Method with boundary elements17
Three-dimensional crack propagation and inclusion-crack interaction based on IGABEM16
Numerical modeling of interfacial cracking with soft and hard inclusions16
Linear energy-stable Runge–Kutta relaxation schemes for the Bi-flux diffusion model16
Morphogenesis of free-form surface structures based on geometrically nonlinear isogeometric analysis16
Application of 2D coupled algorithms to thermally induced dynamics of temperature-dependent nanocomposite cylindrical panels under transient heat shock16
A new insight into the analysis of plane elasticity with coupling of numerical manifold and boundary element methods16
Robust solutions of the Mild Slope Equations using a discontinuous DRBEM16
The improved interpolating element-free Galerkin method based on nonsingular weight functions for three-dimensional elastoplastic problems16
SARS-CoV-2 rate of spread in and across tissue, groundwater and soil: A meshless algorithm for the fractional diffusion equation16
Higher order theories for the modal analysis of anisotropic doubly-curved shells with a three-dimensional variation of the material properties16
A radial basis function-finite difference method for solving Landau–Lifshitz–Gilbert equation including Dzyaloshinskii-Moriya interaction16
Singularity treatments in transient confined seepage using numerical manifold method16
Generalized higher order layerwise theory for the dynamic study of anisotropic doubly -curved shells with a mapped geometry16
Numerical study of two operator splitting localized radial basis function method for Allen–Cahn problem16
A temporally piecewise adaptive multiscale scaled boundary finite element method to solve two-dimensional heterogeneous viscoelastic problems16
A new numerical method for elastic-plastic plate analysis: Theoretical-experimental validation and its application in ratcheting phenomenon16
Coupled dynamics of axially functionally graded graphene nanoplatelets-reinforced viscoelastic shear deformable beams with material and geometric imperfections15
Concurrent multiscale analysis of anti-seepage structures in embankment dam based on the nonlinear Arlequin method15
Wavelet-based techniques for Hygro-Magneto-Thermo vibration of nonlocal strain gradient nanobeam resting on Winkler-Pasternak elastic foundation15
Radial basis function partition of unity procedure combined with the reduced-order method for solving Zakharov–Rubenchik equations15
Improved dynamic analysis of shear deformable shells using the hybrid displacement boundary element method15
A comprehensive parametric study on heat transfer optimization of a triangular enclosure subjected to a magnetic field using neural network machine learning15
A selective smoothed finite element method for 3D explicit dynamic analysis of the human annulus fibrosus with modified composite-based constitutive model15
Geometrically nonlinear topology optimization of porous structures15
A novel method for simultaneous determination of thermophysical properties and boundary conditions of phase change problems based on element differential method15
Time-dependent nonlinear collocation method and stability analysis for natural convection problems15
A new strategy for 3D non-persistent crack propagation by the numerical manifold method with tetrahedral meshes15
Hydrodynamic and heat transfer investigations of multi-phase nanofluid flow in the phase change material of silver nanoparticles dispersed in water/wax-paraffin15
Turbulent forced convective flow in a conical diffuser: Hybrid and single nanofluids15
Development of time-space adaptive smoothed particle hydrodynamics method with Runge-Kutta Chebyshev scheme15
Novel study of perovskite materials and the use of biomaterials to further solar cell application in the built environment: A molecular dynamic study15
A three-dimensional indirect boundary integral equation method for the scattering of seismic waves in a poroelastic layered half-space15
NumCalc: An open-source BEM code for solving acoustic scattering problems15
Wave diffraction and radiation by a fully-submerged body in front of a vertical wall by using an exact DtN artificial boundary condition15
A new isogeometric boundary element method to analyze two-dimensional potential and elasticity problems15
Aerodynamic Analysis of Temperature-Dependent FG-WCNTRC Nanoplates under a Moving Nanoparticle using Meshfree Finite Volume Method15
Expression of Concern: Molecular Dynamics Method for Numerical Study of Thermal Performance of Hexacosane PCM in a Cu-Nanochannel14
Expression of Concern: Waste-to-Energy in Saudi Arabia: Treatment of petroleum wastewaters utilizing zeolite structures in the removal of phenol pollutants by using the power of molecular dynamics met14
On the response of graphene platelet reinforced composite laminated plates subjected to instantaneous thermal shock14
Shape effects of TEG mounted ventilated cavities with alumina-water nanofluids on the performance features by using artificial neural networks14
Micro-scale analysis on shear characteristics of unsaturated soil by considering capillary suction and adsorption suction based on DDA14
Thermal and hydrodynamic study of mixed convection heat transfer of a nanofluid in an enclosure with unequal-sized baffles using the Lattice Boltzmann method14
An Eulerian–Lagrangian method of fundamental solutions for the advection–diffusion equation with time dependent coefficients14
The numerical manifold method for harmonic wave propagation in unbounded domains14
Expression of Concern: Heat Transfer and Fluid Flow around Starfish-Inspired Cylinder by Immersed Boundary-Simplified Thermal Lattice Boltzmann Method14
Exact treatment of volume constraint for RDE-based topology optimization of elastoplastic structures14
High-order Gaussian RBF-FD methods for real estate index derivatives with stochastic volatility14
Editorial Board14
A coupled SBFEM-IBIEM method for the solution of wave scattering by a hill with fissures under SV waves14
Gradient-constrained algorithm for simulating bubble growth in microchannel boiling flow using volume of fluid method14
Expression of Concern: The effect of penetrated oxygen particles on combustion time of coated Al hydride nanoparticles in an oxygenated medium by applying molecular dynamics method via Lennard-Jones a14
Influence of using nanofluid and phase change material on the performance of a solar thermal panel to provide the required energy of an office building in a mine14
Quadtree SBFEM-based nonlocal damage analysis for soft biological tissues with interval parameters14
A novel stabilized Galerkin meshless method for steady incompressible Navier–Stokes equations14
Boundary Elements and other mesh reduction methods for Finance, Economics, Probability and Statistics14
An efficient boundary-type meshfree method for analysis of two-dimensional laser heating problems14
1.2001068592072