Flow Measurement and Instrumentation

Article	Citations
Measuring solid cuttings transport in Newtonian fluid across horizontal annulus using electrical resistance tomography (ERT)	30
New correlations for better monitoring the all-oil mud rheology by employing artificial neural networks	28
Adaptive neuro-fuzzy algorithm applied to predict and control multi-phase flow rates through wellhead chokes	28
A new approach for oblique weir discharge coefficient prediction based on hybrid inclusive multiple model	25
Predicting oil flow rate through orifice plate with robust machine learning algorithms	24
Estimation of triangular side orifice discharge coefficient under a free flow condition using data-driven models	24
Development of liquid level measurement technology: A review	24
Prediction of gas-liquid two-phase choke flow using Gaussian process regression	23
Doppler spectrum analysis and flow pattern identification of oil-water two-phase flow using dual-modality sensor	22
An improvement of the Space-Time Image Velocimetry combined with a new denoising method for estimating river discharge	22
Approximation of the discharge coefficient of differential pressure flowmeters using different soft computing strategies	21
Identification of gas-liquid two-phase flow patterns in a horizontal pipe based on ultrasonic echoes and RBF neural network	21
Modeling, simulation and experimental validation of flow rate of electro-hydraulic hitch control valve of agricultural tractor	21
A novel approach for estimation of discharge coefficient in broad-crested weirs based on Harris Hawks Optimization algorithm	21
Multi-objective reliability-based optimization for design of trapezoidal labyrinth weirs	20
A flow rate measurement method for horizontal oil-gas-water three-phase flows based on Venturi meter, blind tee, and gamma-ray attenuation	18
Robust estimators for free surface turbulence characterization: a stepped spillway application	18
Research on the dynamic characteristics of water hydraulic servo valves considering the influence of steady flow force	18
Flow regime identification of steam-water two-phase flow using optical probes, based on local parameters in vertical tube bundles	16
Deep particle image velocimetry supervised learning under light conditions	16
Reliable prediction of the discharge coefficient of triangular labyrinth weir based on soft computing techniques	15
Application of hybrid neural network in discharge coefficient prediction of triangular labyrinth weir	15
Cavitation reduction in the globe valve using oblique perforated cages: A numerical investigation	15
Response and flow characteristics of a dual-rotor turbine flowmeter	15
Particle image velocimetry flowmeter for natural gas applications	15

Water meter pointer reading recognition method based on target-key point detection	15
Prediction method of ball valve internal leakage rate based on acoustic emission technology	15
Statistical characterization of the interfacial behavior of the sub-regimes in gas-liquid stratified two-phase flow in a horizontal pipe	14
Particle image velocimetry investigations on multiphase flow in fluidized beds: A review	14
A unique test facility for calibration of domestic flow meters under dynamic flow conditions	14
Investigations on pressure dependence of Coriolis Mass Flow Meters used at Hydrogen Refueling Stations	14
Flow pattern identification and measurement techniques in gas-liquid-liquid three-phase flow: A review	14
Discharge prediction for rectangular sharp-crested weirs by machine learning techniques	14
Particle image velocimetry in a centrifugal pump: Details of the fluid flow at different operation conditions	14
Measurement of high-water-content oil-water two-phase flow by electromagnetic flowmeter and differential pressure based on phase-isolation	13
Developing a model for multi-objective optimization of open channels and labyrinth weirs: Theory and application in Isfahan Irrigation Networks	13
3D electromagnetic tomography using a single layer sensor array	13
An intelligent approach for calculating natural gas compressibility factor and its application in ultrasonic flow meters	13
Fluid-dynamic analysis and multi-objective design optimization of piezoelectric servo valves	13
A review on Pitot tube icing in aeronautics: Research- design and characterization – future trends	12
Research on image reconstruction algorithms based on autoencoder neural network of Restricted Boltzmann Machine (RBM)	12
An adaptive CEEMD-ANN algorithm and its application in pneumatic conveying flow pattern identification	12
Evaluating phase-detection-based approaches for interfacial velocity and turbulence intensity estimation in a highly-aerated hydraulic jump	12
Experimental and numerical study of flow over a broad-crested weir under different hydraulic head ratios	12
Energy dissipation of flow over the type-B Piano Key Weir	12
A novel method to improve Electrical Resistance Tomography measurements on slurries containing clays	12
Flow measurement challenges for carbon capture, utilisation and storage	12
Analysis of the effect of rigid vegetation patches on the hydraulics of an open channel flow with Realizable k-ε and Reynolds stress turbulence models	11
Applications of digital signal processing methods in TOF calculation of ultrasonic gas flowmeter	11
A new approach for deducing the stage-discharge relationship of a triangular broad-crested device	11
Hydrodynamic characteristics and optimization design of a bio-inspired anti-erosion structure for a regulating valve core	11
Measurement of mixing time in a gas-liquid mixing system stirred by top-blown air using ECT and image analysis	11
The calculation of the uncertainty of the orifice-plate discharge coefficient	11
Quantifying bubble size and 3D velocity in a vortex with digital holographic particle tracking velocimetry (DHPTV)	11
Structural optimization of V-sector valve cores and adaptability in secondary heating networks	11
A non-convex regularization method combined with Landweber method for image reconstruction in electrical resistance tomography	11
Phase volume fraction measurement of slug flow with surfactant based on an image-quick closing valve method	11
On cup anemometer performance at high altitude above ground	10
Vibration-based multiphase-flow pattern classification via machine learning techniques	10
Experimental study on unsteady characteristics of the transient cavitation flow	10
Experimental and numerical analysis of velocity distribution in a compound meandering channel with double layered rigid vegetated flood plains	10
Signal processing for slug flow analysis via a voltage or instantaneous liquid holdup time-series	10
Measurements of water consumption for the development of new test regimes for domestic water meters	10
A review of studies on estimating the discharge coefficient of flow control structures based on the soft computing models	10
Developing and evaluation of an electrical impedance tomography system for measuring solid volumetric concentration in dredging scale	10
Modeling the flow rate of dry part in the wet gas mixture using decision tree/kernel/non-parametric regression-based soft-computing techniques	10
Establishment of correlation for the pressure fluctuations on the low-head Francis turbine in the draft tube cone from the model test	10
Cavitation effect on flow resistance of sleeve regulating valve	10
Modeling temperature effects on a Coriolis mass flowmeter	10
Investigation of flow characteristics and energy dissipation over new shape of the trapezoidal labyrinth weirs	10
Flume experiments for assessing the dye-tracing technique in rill flows	10
Measurement and verification of transient injection flow rate of high pressure natural gas pulse injector	10
Flow measurement using a triangular broad crested weir theory and experimental validation	10
Image reconstruction of electrical capacitance tomography based on optimal simulated annealing algorithm using orthogonal test method	9
Flow regime identification and gas volume fraction prediction in two-phase flows using a simple gamma-ray gauge combined with parallel artificial neural networks	9

Statistical characterization of the flow structure of air-water-solid particles three-phase flow in the airlift pump-bubble generator system	9
Flow measurement and instrumentation flow control characteristics of throttling venturi valve with adjustable area	9
Prediction of the discharge of side weir in the converge channels using artificial neural networks	9
Analysis of the static mixer effect on natural gas mixing process in a pipeline	9
Dual-field measurement system for real-time material flow on conveyor belt	9
Numerical simulation of free flow through side orifice in a circular open-channel using response surface method	9
Performance evaluation of Coriolis mass flow meter in laminar flow regime	9
Experimental test and theoretical modeling on the working characteristics of spherical water pump	9
Discharge coefficient for vertical sluice gate under submerged condition using contraction and energy loss coefficients	9
Experiment and simulation study on cavitation flow in pressure relief valve at different hydraulic oil temperatures	9
Wet gas measurements of long-throat Venturi Tube based on forced annular flow	9
Flow disturbance compensation calculated with flow simulations for ultrasonic clamp-on flowmeters with optimized path arrangement	8
Simultaneous velocity profile and temperature profile measurements in microfluidics	8
A hybrid deep learning model for ECT image reconstruction of cryogenic fluids	8
Analysis of Delta In-Out of natural gas distribution networks	8
Design of an aeronautic pitot probe with a redundant heating system incorporating phase change materials	8
A methodology for improving both performance and measurement errors in PIV	8
Two-phase flow pattern classification based on void fraction time series and machine learning	8
Study on a new electromagnetic flowmeter based on three-value trapezoidal wave excitation	8
CFD-DPTM-VOF numerical simulation of particle motion and entrainment under the action of single and double bubbles	8
An adaptive non-convex hybrid total variation regularization method for image reconstruction in electrical impedance tomography	8
Three-phase flow meters based on X-rays and artificial neural network to measure the flow compositions	8
Comparison of throttle devices to measure two-phase flowrates of wet gas with extremely-low liquid loading	8
Modified UNet with attention gate and dense skip connection for flow field information prediction with porous media	8
Calibration of hydrogen Coriolis flow meters using nitrogen and air and investigation of the influence of temperature on measurement accuracy	8
On air entrapment onset and surface velocity in high-speed turbulent prototype flows	8
Weighted regularized extreme learning machine to model the discharge coefficient of side slots	8
Total fractional-order variation regularization based image reconstruction method for capacitively coupled electrical resistance tomography	8
Laminar flowmeter for mechanical ventilator: Manufacturing challenge of Covid-19 pandemic	8
Experimental investigation on the effect of axial gap on performance and unsteady pressure pulsations of low head axial flow hydraulic turbine	8
A least squares support vector regression coupled linear reconstruction algorithm for ECT	8
Machine learning identification of multiphase flow regimes in a long pipeline-riser system	8
Influence of flow disturbances on the performance of industry-standard LNG flow meters	8
CFD study of the transient wet gas flow behavior through orifice plate flow meters	7
Experimental evaluation of some current injection-voltage reading patterns in electrical impedance tomography (EIT) and comparison to simulation results - Case study: Large scales	7
Fluid dynamics analysis and optimized throttling design of L-shaped multi-stage high pressure reducing valve	7
PIV-based estimation of viscosity and pressure fields for a steady pseudoplastic flow	7
Identification of gas-liquid two-phase flow regime in pipelines with low liquid holdup based on ResNet1D-34	7
Study and application of discharge calibration for submerged radial gates	7
Blow-down calibration of a large ultrasonic flow meter	7
Recurrent Neural Network based Soft Sensor for flow estimation in Liquid Rocket Engine Injector calibration	7
Effect of the inlet-to-outlet key width ratio of Piano Key Weir on its hydraulic behaviour	7
Experimental modeling of flumes with two semi-cylinder contractions (free and submerged flows)	7
Instability measurement of cavitation conditions in a spool valve through the definition of a cavitation instability index	7
Partitioning strategy for investigating the prediction capability of bed load transport under varied hydraulic conditions: Application of robust GWO-kernel-based ELM approach	7
Prediction of multiphase flow rate for artificially flowing wells using rigorous artificial neural network technique	7
Regime independent flow rate prediction in a gas-liquid two-phase facility based on gamma ray technique and one detector using multi-feature extraction	7
A hybrid ensemble machine learning model for discharge coefficient prediction of side orifices with different shapes	7
Study on the applicability of four flumes in small rectangular channels	7
Numerical analysis of influence of cavitation characteristics in nozzle holes of curved diesel engines	7
Study of the factors influencing the over-reading characteristics of the precession Venturi	7
Evaluation of multi-holed orifice flowmeters under developing flow conditions – An experimental study	7
Uncertainty estimation in calibration of instruments of model turbine test facility	7
A modified model for wet gas flowrate measurement considering entrainment downstream of a cone meter	7
Turbulent flow in small-diameter ultrasonic flow meters: A numerical and experimental study	7
Measurement of the gas flow stagnation temperature by the method of two identical thermocouples in the short-duration aerodynamic facilities	7
Experimental investigation of gas-liquid flow in a vertical venturi installed downstream of a horizontal blind tee flow conditioner and the flow regime transition	7
Flow state monitoring of gas-water two-phase flow using multi-Gaussian mixture model based on canonical variate analysis	7
Development of a high-precision and wide-range ultrasonic water meter	7
Leakage detection in water networks by a calibration method	7
Dispersed-phase velocities for gas-liquid vertical slug and dispersed-bubbles flows using an ultrasonic cross-correlation technique	7
Image reconstruction algorithm of electromagnetic tomography based on fractional Kalman filter	7
General theory of invariant methods for measuring the flow rate of multicomponent flows	7
Design and experimental research of internal leakage detection device of buried pipeline ball valve based on valve cavity pressure detection	7
Validation of the GUM using the Monte Carlo method when applied in the calculation of the measurement uncertainty of a compact prover calibration	7
Features selection for recognition of severe slugging in a long pipeline with an S-shaped riser by decision tree	7
Intelligent identification of two-phase flow patterns in a long pipeline-riser system	6
Developing and testing a novel pressure-controlled hydraulic profile for siphon-shaft spillways	6
A hybrid of surrogate model and MIGA method for optimization and compensation of steady-state flow force on water hydraulic HSV	6
Mass flow rate measurement of gas-liquid two-phase flow using acoustic-optical-Venturi mutisensors	6
Design and use of an online drilling fluid pipe viscometer	6
Experimental investigation on the void fraction characteristics of a sudden expansion tube using wire-mesh sensors	6
Concentration and pressure measurements of dense sand and gravel multiphase flows under transient flow conditions in a vertically oriented closed conduit — Assessment of system and sensor performance	6
New switching gate diverter valve for large flow measurement systems	6
Gas–liquid two-phase flowrate measurement in pseudo-slug flow with Venturi	6
Soft sensor for an orifice flowmeter in presence of disturbances	6
PIV measurements over a double bladed Darrieus-type vertical axis wind turbine: A validation benchmark	6
A method for correcting discharge of boat-mounted ADCP measurements	6
Experimental investigation of relative velocity field based on image rotation method in pump impeller	6
Model analysis for differential pressure two-phase flow rate meter in intermittent flow	6

Particle erosion transient process visualization and influencing factors of the hydraulic servo spool valve orifice	6
Velocity measurements in developing narrow open-channel flows with high free-stream turbulence: Acoustic Doppler Velocimetry (ADV) vs Laser Doppler Anemometry (LDA)	6
Hydraulic investigation of modified semi-cylindrical weirs	6
Experimental investigation of a cavitating Venturi and its application to flow metering	6
Determination of discharge coefficient of stepped morning glory spillway using a hybrid data-driven method	6
Study on flow force compensation characteristics and optimization design of jet guiding groove	6
A generalized stage-discharge relationship for sharp-crested power-law weirs by dimensional analysis and self-similarity	6
Experimental study of cavitation noise characteristics in a centrifugal pump based on power spectral density and wavelet transform	6
Optimal design of wide viscosity range turbine flow sensor based on flow field analysis	6
Study on the design of ball valve based on elastic ring valve seat structure and fluid characteristics and fatigue strength	6
A numerical model for simulating separated gas-liquid two-phase flow with low GVF in a V-cone flowmeter	6
Flow over gabion weir under free and submerged flow conditions	6
Coupled model of dual differential pressure (DDP) for two-phase flow measurement based on phase-isolation method	6
Identification of two-phase flow pattern in porous media based on signal feature extraction	6
A comprehensive study of hole-to-hole interaction for multi-hole orifice (MHO) in hydrodynamic cavitation process	6
Hydraulic characterization of a second-generation common rail injector operating under solo and split injection strategies	6
Effect of the crest height on the stage-discharge formula of rectangular and triangular sharp-crested weirs under free-flow conditions	5
Study on the influence of structural parameters on the flow and cavitation characteristics of tandem multi-stage pressure-reducing valves	5
Experimental study to establish an evaluating method for the responsiveness of liquid flowmeters to transient flow rates	5
Data-based estimation and simulation of compressible pulsating flow with reverse-flow through an orifice	5
Prediction of hydraulic jump characteristics in a closed conduit using numerical and analytical methods	5
Flow velocity pattern around trapezoidal piano key side weirs	5
Measurement of steam flow rates using a clamp-on ultrasonic flowmeter with various wetness fractions	5
Determining the flow correlation for an orifice with a non-dimensional number	5
Velocity distribution of liquid phase at gas-liquid two-phase stratified flow based on particle image velocimetry	5
Simulation and experimental research on steady flow force compensation for a servo proportional valve	5
Stage-discharge relationship for slide gates installed in partially full pipes	5
Surface dense discharge from rectangular and trapezoidal channels	5
Improved hydrogen consumption detection method with flow meter of fuel cell vehicle	5
Internal leakage rate prediction and failure diagnosis of buried pipeline ball valve based on valve cavity pressure detection	5
Modeling and design of a new conductance probe for Gas Void Fraction measurement of two-phase flow through annulus	5
Flow pattern identification for gas-oil two-phase flow based on a virtual capacitance tomography sensor and numerical simulation	5
Performance evaluation of an innovative design modification of an orifice meter	5
Dynamic performance analysis of turbine flow sensor based on CFD simulations	5
Structure influence on the operating limit range and mixing performance of non-axisymmetric jet pump	5
Adaptive filtering techniques for velocity estimation of tomographic electric capacitance signals of two-phase gas/oil flows	5
A new method for field test of the heating capacity of air source heat pumps	5
Flow resistance due to shrubs and woody vegetation	5
Multiphase flow and mixing quantification using computational fluid dynamics and magnetic resonance imaging	5
Sensitivity studies of ANFIS based force recovery technique towards prediction of aerodynamic load	5
Microscale mechanisms of ultrasound velocity measurement in metal melts	5
The effects of temperature and humidity on the deposition of nebulized droplet in an idealized mouth-throat model	5
Identification of coherent structures in horizontal slug flow	5
An artificial neural network and a combined capacitive sensor for measuring the void fraction independent of temperature and pressure changes for a two-phase homogeneous fluid	5
Transient flow analysis on opening process of pneumatic gas proportional valve with two-solenoid valve	5
Effect of flow-rate measurement accuracy on unaccounted for gas in transmission networks	5
A regression-based model for prediction of flowmeters calibration cost in oil and gas industry	5
Experimental study of discharge coefficient of trapezoidal arced labyrinth weirs of widened middle cycle	5
Machine-learning classification of environmental conditions inside a tank by analyzing radar curves in industrial level measurements	5
Critical measurement parameters estimation in liquid rocket engine using LSTM-based soft sensor	5
Prediction of solid circulation rate in an internal circulating fluidized bed: An empirical and ANN approach	4
Application of artificial neural network to multiphase flow metering: A review	4
The consistency of pressure effects between three identical Coriolis flow meters	4
Coping with electrode polarization for development of DC-Driven electrical impedance tomography	4
Experimental study of discharge formulas for rectangular sharp-crested weirs under free flow condition	4
The effect of air velocity on slugs in a confined channel	4
Computational fluid dynamics analysis of flowmeters with elliptical gear pairs and evaluation of calculated flow rate by Taguchi method	4
A study of signal noise reduction of the mass air flow sensor using the flow conditioner on the air induction system of heavy-duty truck	4
Methodology for the application of velocimetry by molecular tagging of hypersonic flows	4
Effect of conical angle on the hydraulic properties of orifice plate flows: A numerical approach	4
A deep neural networks-based image reconstruction algorithm for a reduced sensor model in large-scale tomography system	4
Effect of superhydrophobic surfaces on bubble column flow dynamics	4
Discharge coefficient of pilot poppet valve at low Reynolds number	4
Measurement of fluid flow rate using nanocomposite silicone rubber sensor	4
Particle image velocimetry in the impeller of a centrifugal pump: A POD-based analysis	4
Development of artificial neural networks for the prediction of the pressure field along a horizontal pipe conveying high-viscosity two-phase flow	4
Experimental analysis of flow characteristics over hydrofoil weirs	4
Radial gas-permeability measurement in cement-based materials under steady-state flow	4
Revisit the Pitot static tubes in the standards	4
Research on wet gas separation method based on swirl and ejection cycle technology	4
An experimental study on real–time analysis of two–phase peristaltic slug flows in dialysis machines	4
Adoption of machine learning in estimating compressibility factor for natural gas mixtures under high temperature and pressure applications	4
Behaviors of discharge coefficients of small diameter critical nozzles	4
Experimental study on rectangular cut-throated flume: Effects of flume walls slopes and channel longitudinal slope	4
Image-based river discharge estimation by merging heterogeneous data with information entropy theory	4
Electrical resistance tomography image reconstruction based on one-dimensional multi-branch convolutional neural network combined with attention mechanism	4
Extracting reference voltages from measurement voltages for oil-water two-phase flow measurement of electrical impedance tomography	4
Role of dissipation chamber in energy loss of vortex structures: Experimental evaluation	4
A robust filtering algorithm based on the estimation of tracer visibility and stability for large scale particle image velocimetry	4
Discharge coefficients of CFVN predicted for high Reynolds numbers based on low-Re-calibration	4
The relative perception system of underwater bionic vehicles based on the artificial lateral line pressure sensor array	4
Identification of boiling flow pattern in narrow rectangular channel based on TFA-CNN combined method	4
Investigation on wave morphology and temperature distribution of falling liquid film in a vertical tube	4
Modeling subcritical multi-phase flow through surface chokes with new production parameters	4
Twin-array capacitance sensor for multi-parameter measurement of gas-solid particle flow based on BP-Adaboost	4
Improvement of the five-hole probe calibration using artificial neural networks	4
Effect of the convergence flow conditioner on rectifying eccentric jet flow induced by a ball valve	4
Effect of the pipe bend of the morning glory spillway on the cavitation number	4
Experimental analysis of combined side weir-gate located on a straight channel	4
Quality measurement of refrigerant two-phase flow in refrigeration cycles	4
Influence of crest geometric on discharge coefficient efficiency of labyrinth weirs	4
Study on double differential pressure measurement method of gas-liquid two-phase flow in high gas content wells	4
Measurements of suspended ashes concentration in turbulent flow with acoustic doppler velocimeter	4
Simulation and experimental investigation on gas-liquid two-phase flow separation behaviors in multitube T-Junction separator	4
Using statistical features and a neural network to predict gas volume fractions independent of flow regime changes	3