Proceedings of the Institution of Mechanical Engineers Part B-Journal

Papers
(The TQCC of Proceedings of the Institution of Mechanical Engineers Part B-Journal is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-02-01 to 2024-02-01.)
ArticleCitations
Ontology-based modeling of part digital twin oriented to assembly38
An intelligent prediction model of the tool wear based on machine learning in turning high strength steel30
State of the art in processing of shape memory alloys with electrical discharge machining: A review29
Experimental study on cutting force in ultrasonic vibration-assisted turning of 304 austenitic stainless steel29
New method to enhance the mechanical characteristics of Al-5052 alloy weldment produced by tungsten inert gas28
Data management for developing digital twin ontology model24
On the suitability of induction heating system for metal additive manufacturing24
Impact of grinding wheel specification on surface integrity and residual stress when grinding Inconel 71824
Effect of the Al2O3 powder addition on the metal removal rate and the surface roughness of the electrochemical grinding machining23
Comparison between laser beam and gas tungsten arc tailored welded blanks via deep drawing23
Synergy between topology optimization and additive manufacturing in the automotive field23
Influence of processing parameters on the density of 316L stainless steel parts manufactured through laser powder bed fusion22
An experimental analysis of minimum chip thickness in micro-milling of two different titanium alloys21
Microscopic contact pressure and material removal modeling in rail grinding using abrasive belt20
Laser cutting optimization model with constraints: Maximization of material removal rate in CO2 laser cutting of mild steel20
Review of the effect of process parameters on performance measures in the incremental sheet forming process20
Digital Twin–oriented real-time cutting simulation for intelligent computer numerical control machining20
Environmental effects on reliability and accuracy of MFCC based voice recognition for industrial human-robot-interaction19
Turning of Austempered Ductile Iron with ceramic tools19
Effect of Process Parameters on Mechanical Properties of Aluminum Composite Foam Developed by Friction Stir Processing18
A generic integrated approach of assembly tolerance analysis based on skin model shapes18
Digital retrofit: A first step toward the adoption of Industry 4.0 to the manufacturing systems of small and medium-sized enterprises18
A novel high-shear and low-pressure grinding method using specially developed abrasive tools17
Prediction models for specific energy consumption of machine tools and surface roughness based on cutting parameters and tool wear17
Cryogenic-LN2 and conventional emulsion assisted machining of hardened steel: Comparison from sustainability perspective17
Machining of titanium alloys for medical application - a review17
Model-Based Definition and Enterprise: State-of-the-art and future trends16
Kinematic modeling and control of mobile robot for large-scale workpiece machining16
Bionic microstructure on titanium alloy blade with belt grinding and its drag reduction performance16
Multi-response optimization of electrochemical machining parameters in the micro-drilling of AA6061-TiB2in situ composites using the Entropy–VIKOR method15
Effect of process parameters on temperature and force distribution during friction stir welding of armor-marine grade aluminum alloy15
The influence of ultrasonic elliptical vibration amplitude on cutting tool flank wear15
Employment of ultrasonic assisted turning in the fabrication of microtextures to improve the surface adhesion of the titanium implant15
Prediction of tool wear based on GA-BP neural network15
The finite element analysis–based simulation and artificial neural network–based prediction for milling processes of aluminum alloy 705015
The application of machine learning to sensor signals for machine tool and process health assessment14
Electric discharge machining using rapid manufactured complex shape copper electrode with cryogenic cooling channel14
Real-time vision-based multiple object tracking of a production process: Industrial digital twin case study14
In-process monitoring in electrical machine manufacturing: A review of state of the art and future directions14
Investigation of hybrid manufacturing of stainless steel 316L components using direct energy deposition14
Towards intelligent CFRP composite machining: Surface analysis methods and statistical data analysis of machined fibre laminate surfaces14
Effect of TiC nanoparticles on microstructural and tribological properties of Cu-TiC nano-composites13
An integrated machine learning: Utility theory framework for real-time predictive maintenance in pumping systems13
Investigating the relation between debinding atmosphere and mechanical properties of stereolithography-based three-dimensional printed Al2O3 ceramic13
Data-driven probabilistic performance of Wire EDM: A machine learning based approach12
A novel approach for removal of delaminated fibers of a reinforced composites using electrochemical discharge machining12
Positioning accuracy degradation and lifetime prediction of the ball screw considering time-varying working conditions and feed modes12
Fatigue performance of surface ground and wire electrical discharge machined TiNi shape memory alloy12
Investigation of drilling properties of AA7075/Al2O3 functionally graded materials using gray relational analysis12
An experimental insight of friction stir welding of dissimilar AA 6061/Mg AZ 31 B joints12
A two-stage integrating optimization of production scheduling, maintenance and quality12
Adoption of smart and sustainable manufacturing practices: An exploratory study of Indian manufacturing companies12
Study on the effective discharge energy mechanism of vertical ultrasonic vibration assisted EDM processing12
Effect of minimum quantity lubrication and vortex tube cooling on laser-assisted micromilling of a difficult-to-cut steel12
Hole quality and tool wear when dry drilling of a new developed metal/composite co-cured material12
Tool wear monitoring in drilling of high-strength compacted graphite cast irons12
Flow, process forces and strains during Friction Stir Welding: A comprehensive First principle approach11
Enhancement of the tensile shear strength for joining low-ductility aluminium to high-strength steel by using electrically-assisted mechanical clinching (EAMC)11
Experimental investigation of tool wear characteristics and analytical prediction of tool life using a modified tool wear rate model while machining 90 tungsten heavy alloys11
Improvement of thread turning process using micro-hole textured solid-lubricant embedded tools11
An investigation of influence of cutting parameters on three-dimensional surface topography in micromilling SiCp/Al composites11
Influence of clinching steps and sheet thickness on the mechanical properties of the clinching joint11
Study on heat transfer characteristics and thermal error suppression method of cylindrical giant magnetostrictive actuator for ball screw preload11
Rapid CO2 laser processing technique for fabrication of micro-optics and micro-structures on fused silica materials11
Selective laser melting of stainless steel and silicon nitride fibre metal matrix composites11
Influence of plunge depth during friction stir welding of aluminum pipes11
On 3D printing of electro-active PVDF-Graphene and Mn-doped ZnO nanoparticle-based composite as a self-healing repair solution for heritage structures11
Machinability investigation and sustainability analysis of minimum quantity lubrication–assisted micro-milling process11
Eco-green machining of superalloy A286: Assessment of tool wear morphology and surface topology11
Fabrication of superhydrophobic surface on AISI316L stainless steel using a nanosecond pulse laser10
Geometric definition, rapid prototyping, and cutting force analysis of cylindrical milling tools with arbitrary helix angle variations10
Multi-response optimization of the actively driven rotary turning for energy efficiency, carbon emissions, and machining quality10
Effect of plasma preheating on weld quality and tool life during friction stir welding of DH36 steel10
Determination of vehicle requirements of AGV system based on discrete event simulation and response surface methodology10
Optimization of compressed air assisted-turning-burnishing process for improving machining quality, energy reduction and cost-effectiveness10
An accurate cutting tool wear prediction method under different cutting conditions based on continual learning10
Manufacturing of three-layered sandwich composite of AA1050/LZ91/AA1050 using cold roll bonding process10
Modeling and experimental study on tool-particle interaction and surface integrity in milling SiCp/Al metal matrix composites10
On the impacts of cutting parameters on surface roughness, tool wear mode and size in slot milling of A356 metal matrix composites reinforced with silicon carbide elements10
Influence of the rotary friction welding parameters on the microhardness and joint strength of Ti6Al4V alloys10
Fabrication and experimental investigation of arc erosion behavior in W/Cu functionally graded composites10
Effect of thermo-mechanical loading on machining induced residual stresses in ultrasonic vibration assisted turning of Ti6Al4V alloy10
An improved Jacobian-Torsor model for statistical variation solution in aero-engine rotors assembly10
Surface roughness of AISI 1010 and AISI 304 of PEMFC bipolar plates with microscale hydroformed capillary channels9
Research on the optimal design technology of a digital assembly sequence based on an internet of things data collection framework9
Micro-channel fabrication on GFRP composite through electrochemical spark machining method and optimization of process parameters9
Optimal parameters of abrasive flow finishing for hip joint implants9
Fabrication of hydrophobic surfaces on Titanium using Micro-EDM exhibiting antibacterial properties9
Sensitivity analysis of machining accuracy reliability considering partial correlation of geometric errors for Horizontal Machining Center9
Process capabilities of commercially pure titanium grade 2 formed through warm incremental sheet forming9
Applications of affective computing in human-robot interaction: State-of-art and challenges for manufacturing9
Investigation of metallurgical characterization and mechanical properties of double-sided friction stir welding of aluminum 6061 T6 alloy9
Effects of cutter path orientations on milling force, temperature, and surface integrity when ball end milling of TC17 alloy9
A fuzzy approach to determine process quality for one-sided specification with imprecise data9
Analysis of the cutting ratio and investigating its influence on the workpiece’s diametrical error in ultrasonic-vibration assisted turning9
Investigation on deformation behavior of magnesium alloy sheet AZ31B in pulsating hydroforming9
An insight on Powder Mixed Electric Discharge Machining: A state of the art review9
Study on the improvement of the surface integrity and efficiency of electrical-discharge-machined TC4 titanium alloy via abrasive flow machining9
Processing strategy for high strength Ni-based hybrid composite clad on SS 316L steel through microwave heating9
Impedance control and parameter optimization of surface polishing robot based on reinforcement learning9
Dynamic modeling and stability prediction in milling process of thin-walled workpiece with multiple structural modes9
Effective thermal elastic plastic finite element computation for welding distortion investigation of pozidriv-type welded structure with rectangular pipes and its mitigation9
Effect of laser rescanning on Ti6Al4V microstructure during selective laser melting9
Parametric study of aluminum bar shearing using Johnson-Cook material modeling8
Performance assessment of energy efficient and eco-friendly turning of Nimonic C-263: A comparative study on MQL and cryogenic machining8
A corner smoothing method with feedrate blending for linear segments under geometric and kinematic constraints8
A data-driven multi-criteria decision-making approach for assessing new product conceptual designs8
Concurrent scheduling and layout of virtual manufacturing cells considering assembly aspects8
Queuing theory-based optimization research on the multi-objective transportation problem of fourth party logistics8
Multi-objective optimization of the manufacture of face-milled hypoid gears on numerical controlled machine tool8
The influence of cutting parameters on micro-topography of frequency features extracted from the machined KH2PO4 surfaces8
Chatter stability analysis of variable speed milling with helix angled cutters8
Tool tip cutting specific energy prediction model and the influence of machining parameters and tool wear in milling8
Generation mechanism modeling of surface topography in tangential ultrasonic vibration-assisted grinding with green silicon carbide abrasive wheel8
Holistic simulation-based optimisation methodology for facility layout design with consideration to production and logistics constraints8
Designs of human–robot interaction using depth sensor-based hand gesture communication for smart material-handling robot operations8
Investigation on surface quality of high-speed cutting titanium alloy Ti6Al4V based on Split-Hopkinson pressure bar8
Microstructural Evolution & Mechanical Properties of ZrO2/GNP and B4C/GNP reinforced AA6061 Friction Stir Processed Surface Composites - A Comparative study8
The effect of magnesium content on drilling of Al-Mg-Ti alloy by hole electrical discharge machining process8
Modeling of flatness errors in end milling of thin-walled components7
The investigation of low-cycle fatigue crack propagation of 16 Mn eccentric bar based on the acoustic emission technique7
Highly efficient and accurate calibration method for the position-dependent geometric errors of the rotary axes of a five-axis machine tool7
Correlation between the microstructure and machinability in machining Al–(5–25) wt% Si alloys7
The formation mechanism of protrusion of long thread by axial self-infeed rolling process7
Analysis of novel induction heating extruder for additive manufacturing using aluminum filament7
A large-scale approach for superhydrophobic coating fabrication7
A novel approach to machining process fault detection using unsupervised learning7
Data architecture and model design for Industry 4.0 components integration in cyber-physical production systems7
Comparison of incremental sheet metal forming process using newly designed multipoint tool with the existing single point tool by optimization and characterization methods on austenite stainless steel7
An adaptive parameters adjustment and planning method for robotic belt grinding using modified quality model7
Multi-domain integrated modeling and verification for the ball screw feed system in machine tools7
Design of a turning cutting tool with large length–diameter ratio based on three-element type vibration absorber7
PEEK based cranial reconstruction using thermal assisted incremental sheet forming7
Minimum surface roughness using rule-based modeling of the vibratory finishing process in a high-frequency bowl system7
Investigations on formability of tailor laminated sheets in single point incremental forming7
Status review and research strategies on product-service supply chain7
Accurate preparation of mesoscopic geometric characteristics of ball end milling cutter and optimization of cutting performance7
Mission reliability-oriented integrated scheduling optimization model by combining production planning and maintenance activities7
A study on wire arc additive manufacturing of 308L austenitic stainless steel cylindrical components: Optimisation, microstructure and mechanical properties7
Performance of carbide tools in high-speed dry turning iron-based superalloys7
Prediction of tool wear width size and optimization of cutting parameters in milling process using novel ANFIS-PSO method7
Numerical investigation on the effect of welding speed and heat input on the residual stress of multi-pass TIG welded stainless steel pipe7
The effect of process parameters and cutting tool shape on residual stress of SAE 52100 hard turned steel by high speed machining7
Using abrasive flow finishing process to reduce noise and vibrations of cylindrical and conical gears7
Look-ahead-window-based interval adaptive feedrate scheduling for long five-axis spline toolpaths under axial drive constraints7
Optimization of electrochemical etching process for manufacturing of micro electrodes for micro-EDM application7
Mechanical properties of melt infiltration and powder metallurgy fabricated aluminum metal matrix composite7
Generating the tool path directly with point cloud for aero-engine blades repair7
Integration of axiomatic design and design structure matrix for the modular design of automobile parts7
A multi-particle abrasive model for investigation of residual stress in belt grinding of titanium alloys7
High-performance nickel coating on SLM 316L stainless steel processed by jet electrochemical machining and jet electrodeposition6
High-speed machining of aluminium alloy using vegetable oil based small quantity lubrication6
Investigation of significant factors on deformation with powder bed fusion system6
A novel method to design tolerance of aero-engine casing by integrating 3-D assembly tolerance with performance instability6
Optimum performance evaluation during machining of Al6061/cenosphere AMCs using TOPSIS and VIKOR based multi-criteria approach6
A systematic approach in remanufacturing for high efficiency and low cost: The selective parallel disassembly sequence planning6
Investigation on the surface roughness modeling and analysis for ultra-precision diamond turning processes constrained by the complex multisource factors6
Micro-drilling of Mg-based MMCs reinforced with SiO2 nanoparticles: An experimental approach6
Research on the vibration model and vibration performance of cold orbital forging machines6
Fast and meta heuristics for part selection in flexible manufacturing systems with controllable processing times6
Comparison of various gating systems for investment casting of hydraulic retarder impeller with complex geometry6
Fabrication of circular cooling channels by cold metal transfer based wire and arc additive manufacturing6
New methodology for product development process using structured tools6
Enabling factors of manufacturing servitization: Empirical analysis and implications for strategic positioning6
Chatter stability prediction of milling considering nonlinearities6
A modeling and prediction method for plunge cutting force considering the small displacement of cutting layer6
Development of an enhanced single point milling procedure to screen metalworking cutting fluid performance in terms of tool wear when machining aerospace alloys6
A comparative study between weldability of polycarbonate and nylon-6 using different pin geometries in friction stir welding6
Contribution to the selection of cutting fluid type and its application technique for grinding of bearing steel6
Novel application of mapping method from small displacement torsor to tolerance: Error optimization design of assembly parts6
Effects of preheating and cooling on the crack defects of laser solid formed Rene 104 superalloy parts6
Kinematic calibration of the 3-degree-of-freedom redundantly actuated spatial parallel module of a five-axis hybrid machine6
Support vector regression and genetic-algorithm-based multiobjective optimization of mesoscopic geometric characteristic parameters of ball-end milling tool6
Investigation on dynamic performance of ultra-precision flycutting machine tool based on virtual material method6
A CAD model for the tolerancing of mechanical assemblies considering non-rigid joints between parts with defects6
Research on discharge characteristics of working mediums of electric discharge machining6
Cutting tool wear monitoring in milling processes by integrating deep residual convolution network and gated recurrent unit with an attention mechanism6
Surface integrity of fatigue strength of nickel based super alloy in turning by wire electrical discharge process6
Chatter identification in thin-wall milling using an adaptive variational mode decomposition method combined with the decision tree model6
Development of the innovative differential tool wear modeling for high-feed milling and its experimental verification6
Evaluation of drawing force by a new dimensionless method in deep drawing process6
Investigation of forming limit diagram and mechanical properties of the bimetallic Al/Cu composite sheet at different temperatures which fabricated by explosive welding6
Reliability loss–oriented product assembling quality risk modeling approach based on reliability–quality–reliability chain6
Formulation of SiO2/oil nanolubricant for metal forming using hydrodynamic cavitation6
Comparison of machinability of nickel alloys using WEDM5
A novel geometry error measurement methodology for coaxiality evaluation5
Soft 3D printing of thermoplastic polyurethane: Preliminary study5
Modelling and experiment for grinding forces of gear form grinding considering complete tooth depth engagement5
The AAPF fault-tolerant method for small and complex product assembly5
Adaptive data-driven modular control approach to computer aided process planning for manufacturing spiral bevel and hypoid gears5
Closed-form models for the cutting forces of general-helix cylindrical milling tools5
Design and additive manufacturing of porous titanium scaffolds for optimum cell viability in bone tissue engineering5
Effects of countersunk hole geometry errors on the fatigue performance of CFRP bolted joints5
A probabilistic-based extendable quantitative evaluation method for 3D printing service in cloud manufacturing5
Analysis of the risk of galling in sheet metal stamping dies with drawbeads5
Construction of lean-green coordinated development model from the perspective of personnel integration in manufacturing companies5
Investigation of over-bending defect in the cold roll forming of U-channel section using experimental and numerical methods5
Research on springback characteristic in flexible multi-points 3D stretch-bending process5
Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel5
A study on a general cyber machine tools monitoring system in smart factories5
A low-cost machinability approach to accelerate titanium alloy development5
A subjective-objective evaluation method of hole surface quality in drilling CFRP-Ti stacks5
Image feature analysis for magnetic particle inspection of forging defects5
Asynchronous parallel disassembly sequence planning method of complex products using discrete multi-objective optimization5
Analysis of vibration response and machining quality of hybrid robot based UD-CFRP trimming5
Analysis of characteristics of arc shape caused by intermittent cutting force and dynamic vibration in ultra-precision cutting processes5
Image recognition of limited and imbalanced samples based on transfer learning methods for defects in welds5
Optimization of different parameters related to milling tools to maximize the allowable cutting depth for chatter-free machining5
A multi-objective flexible job-shop cell scheduling problem with sequence-dependent family setup times and intercellular transportation by improved NSGA-II5
Effectiveness prediction of abrasive jetting stream of accelerator tank using normalized sparse autoencoder-adaptive neural fuzzy inference system5
Applying a support vector machine for hollow ball screw condition-based classification using feature extraction5
Process parameter selection for laser welding of aluminium alloy from the perspective of energy effectiveness5
Investigation on laser-induced oxidation assisted micro-milling of Inconel 7185
Applying experimental micro-tool wear measurement techniques to industrial environments5
A roll-bending approach to suppress the edge cracking of silicon steel in the cold rolling process5
An algorithm for trajectory planning of complex surface parts for laser cladding remanufacturing5
Investigation of mechanical properties and microstructures of GH536 fabricated by laser powder bed fusion additive manufacturing5
Implementation of MQTT protocol based network architecture for smart factory5
Effect of micro double helical grooved tools on performance of electric discharge drilling of Ti-6Al-4V5
A comprehensive damage criterion in tube hydroforming5
Experimental research on the deep-hole boring of pure niobium tube5
Mechanism of the scratching of monocrystalline silicon carbide with a diamond grit at different wear stages5
Finishing of OFHC copper using fluid filled open-cell porous flexible abrasive impregnated tools5
0.043462991714478