Electrical Engineering

Article	Citations
Deep learning-based multilabel classification for locational detection of false data injection attack in smart grids	33
Classification of distribution power grid structures using inception v3 deep neural network	30
Statistical analysis of wind energy potential using different estimation methods for Weibull parameters: a case study	30
Interleaved bidirectional DC–DC converter for electric vehicle applications based on multiple energy storage devices	29
Short-term electric power load forecasting using random forest and gated recurrent unit	28
Hybrid fractional fuzzy PID design for MPPT-pitch control of wind turbine-based bat algorithm	27
Prediction of electrical energy consumption based on machine learning technique	25
Particle swarm optimization for design of insulators of distribution power system based on finite element method	24
An extended high-voltage-gain DC–DC converter with reduced voltage stress on switches/diodes	23
A new meta-heuristic programming for multi-objective optimal power flow	23
Adaptive optimum coordination of overcurrent relays for deregulated distribution system considering parallel feeders	22
Reliability assessment and lifetime prediction of Li-ion batteries for electric vehicles	22
A novel strategy for frequency control of islanded greenhouse with cooperative usage of BESS and LED lighting loads	22
An intelligent recognition system for insulator string defects based on dimension correction and optimized faster R-CNN	21
Maximum sensitivity-constrained coefficient diagram method-based PIDA controller design: application for load frequency control of an isolated microgrid	21
Improved performance of detection and classification of 3-phase transmission line faults based on discrete wavelet transform and double-channel extreme learning machine	21
Developed analytical expression for current harmonic distortion of the PV system’s inverter in relation to the solar irradiance and temperature	20
ANN-based dynamic control and energy management of inverter and battery in a grid-tied hybrid renewable power system fed through switched Z-source converter	20
Enhanced bearing fault detection using multichannel, multilevel 1D CNN classifier	20
Modeling and simultaneous management of electric vehicle penetration and demand response to improve distribution network performance	20
Investigation and validation of solar photovoltaic-fed modular multilevel inverter for marine water-pumping applications	19
Optimal distributed generation allocation in unbalanced radial distribution networks via empirical discrete metaheuristic and steepest descent method	18
Digital twin integrated power-hardware-in-the-loop for the assessment of distributed renewable energy resources	18
Application of BPNN optimized by chaotic adaptive gravity search and particle swarm optimization algorithms for fault diagnosis of electrical machine drive system	18
Power quality event classification using optimized Bayesian convolutional neural networks	18

An innovative method-based CEEMDAN–IGWO–GRU hybrid algorithm for short-term load forecasting	18
Current sensors fault detection and tolerant control strategy for three-phase induction motor drives	18
Sizing of a stand-alone PV–wind–battery–diesel hybrid energy system and optimal combination using a particle swarm optimization algorithm	17
Interruptible charge scheduling of plug-in electric vehicle to minimize charging cost using heuristic algorithm	17
Investigation on machine learning algorithms to support transformer dissolved gas analysis fault identification	17
Long short-term memory-singular spectrum analysis-based model for electric load forecasting	17
Monitoring of the power system load margin based on a machine learning technique	16
Fault diagnosis for electric vehicle lithium batteries using a multi-classification support vector machine	16
Accurate simulation and modeling of the control system and the power electronics of a 72-pulse VSC-based generalized unified power flow controller (GUPFC)	16
Power system state forecasting using machine learning techniques	15
Developing the coyote optimization algorithm for extracting parameters of proton-exchange membrane fuel cell models	15
Wind speed estimation MPPT technique of DFIG-based wind turbines theoretical and experimental investigation	15
Parameter design of governor power system stabilizer to suppress ultra-low-frequency oscillations based on phase compensation	15
Refurbishing three-phase synchronous reluctance machines to multiphase machines	14
Intelligent energy cyber physical systems (iECPS) for reliable smart grid against energy theft and false data injection	14
Model predictive control and ANN-based MPPT for a multi-level grid-connected photovoltaic inverter	14
A novel full compensation method for the ground fault current of resonant grounded systems	14
Short-term load forecasting using neural attention model based on EMD	14
A hybrid teaching–learning-based optimizer with novel radix-5 mapping procedure for minimum cost power generation planning considering renewable energy sources and reducing emission	14
Calculation of the overhead transmission line conductor temperature in real operating conditions	14
Artificial neural networks applied on induction motor drive for an electric vehicle propulsion system	13
Dielectric loss and extended voltage response measurements for low-voltage power cables used in nuclear power plant: potential methods for aging detection due to thermal stress	13
A real-time DWT and traveling waves-based multi-functional scheme for transmission line protection reinforcement	13
Enhancing power system loadability and optimal load shedding based on TCSC allocation using improved moth flame optimization algorithm	13
An improved particle swarm optimization using simplex-based deterministic approach for economic-emission power dispatch problem	13
Performance analysis of a PV/HKT/WT/DG hybrid autonomous grid	13
A novel switched-capacitor and fuzzy logic-based quadratic boost converter with mitigated voltage stress, applicable for DC micro-grid	13
Multi-objective energy management of smart homes considering uncertainty in wind power forecasting	13
An experimental study on spectroscopic analysis of alternating liquid dielectrics for transformer	13
Maximum power point tracking for photovoltaic systems under partial shading conditions via modified model predictive control	13
FEM analysis of electric field distribution for polymeric insulator under different configuration of non-uniform pollution	13
A novel two-layer winding topology for sub-harmonic synchronous machines	13
A new voltage regulation strategy using developed power sharing techniques for solar photovoltaic generation-based microgrids	12
A random forest-based approach for fault location detection in distribution systems	12
A probabilistic approach to assess the impact of wind power generation in transmission network expansion planning	12
Increasing the transmission performance of a conventional 110 kV cable line by combining a hydronic concrete pavement system with photovoltaic floor tiles	12
Design, analysis, and testing of I-type electromagnetic actuator used in single-coil active magnetic bearing	12
Monte Carlo simulation of electric vehicle loads respect to return home from work and impacts to the low voltage side of distribution network	12
Improvement optimal power flow solution considering SVC and TCSC controllers using new partitioned ant lion algorithm	12
Reducing LMP and resolving the congestion of the lines based on placement and optimal size of DG in the power network using the GA-GSF algorithm	12
Energy-cost minimization with dynamic smart charging of electric vehicles and the analysis of its impact on distribution-system operation	12
A supervised principal component analysis-based approach of fault localization in transmission lines for single line to ground faults	11
Detection of power swing and blocking the distance relay using the variance calculation of the current sampled data	11
Evaluation of visible contamination on power grid insulators using convolutional neural networks	11
Non-intrusive load monitoring using multi-label classification methods	11
Fault-tolerant control of steer-by-wire systems under voltage and current sensors faults	11
Time-dependent variations in current harmonic emission by LED lamps in the low-voltage network	11
Fault localization method for power distribution systems based on gated graph neural networks	10
Stochastic transmission expansion planning in the presence of wind farms considering reliability and N-1 contingency using grey wolf optimization technique	10
Real-time dynamic security analysis of power systems using strategic PMU measurements and decision tree classification	10

Effect of the magnet shape on the performance of coreless axial flux permanent magnet synchronous generator	10
Method of average voltages in integration step: theory and application	10
Day similarity metric model for short-term load forecasting supported by PSO and artificial neural network	10
Adaptive sliding mode control based on a combined state/disturbance observer for the disturbance rejection control of PMSM	10
Condition monitoring and fault detection of induction motor based on wavelet denoising with ensemble learning	10
Multi-objective optimal power flow considering voltage stability index and emergency demand response program	10
An update on the performance of active energy meters under non-sinusoidal conditions	10
Power management and bus voltage control of a battery backup-based stand-alone PV system	10
Decision fusion scheme for bearing defects diagnosis in induction motors	10
Modeling and analysis of a single-phase core-type transformer under inrush current and nonlinear load conditions	10
Design and implementation of fault tolerant fractional order controllers for the output power of self-excited induction generator	9
An overview of grid-edge control with the digital transformation	9
Reduced search space combined with particle swarm optimization for distribution system reconfiguration	9
A novel regression method in forecasting short-term grid electricity load in buildings that were connected to the smart grid	9
A comprehensive techno-economic analysis for optimally placed wind farms	9
A generalized chaotic baker map configuration for reducing the power loss under shading conditions	9
A new stator voltage error-based MRAS model for field-oriented controlled induction motor speed estimation without using voltage transducers	9
Fuzzy logic-based voltage regulation of hybrid energy storage system in hybrid electric vehicles	9
Extreme learning machine for real-time damping of LFO in power system networks	9
Domestic demand-side management: analysis of microgrid with renewable energy sources using historical load data	9
Impact of electric vehicles and demand management systems on electrical distribution networks	9
A hybrid prediction model based on improved multivariable grey model for long-term electricity consumption	9
Enhancing transient response performance of automatic voltage regulator system by using a novel control design strategy	9
Investment analysis for optimal planning of electric vehicle charging station on a reconfigured unbalanced radial distribution system	9
Detection and classification of multi-complex power quality events in a smart grid using Hilbert–Huang transform and support vector machine	9
Speed and current sensor fault-tolerant induction motor drive for electric vehicles based on virtual sensors	9
Adaptive robust unscented Kalman filter with recursive least square for state of charge estimation of batteries	8
A wireless charging method with lightweight pick-up structure for UAVs	8
Multi-objective-based reactive power planning and voltage stability enhancement using FACTS and capacitor banks	8
A modified carrier-based PWM technique for minimization of leakage current in transformer less single-phase grid-tied PV system	8
Speed sensorless fault-tolerant control of induction motor drives against current sensor fault	8
Lifetime estimation of grid connected LiFePO4 battery energy storage systems	8
Improvement of the power to weight ratio for an induction traction motor using design of experiment on neural network	8
Weather classification-based load and solar insolation forecasting for residential applications with LSTM neural networks	8
A novel switched capacitor-based multilevel inverter with symmetrical and asymmetrical configurations	8
Start-up transient analysis using CWT and ridges for broken rotor bar fault diagnosis	8
Short-term load forecasting based on empirical wavelet transform and random forest	8
A generalized transformerless switched-capacitor inverter for photovoltaic application	8
Dynamic Economic and Emission Dispatch with Renewable Energy Integration Under Uncertainties and Demand-Side Management	8
Design and real-time implementation of an adaptive fast terminal synergetic controller based on dual RBF neural networks for voltage control of DC–DC step-down converter	8
Model predictive controlled three-level bidirectional converter with voltage balancing capability for setting up EV fast charging stations in bipolar DC microgrid	8
Subdomain method for brushless double-rotor flux-switching permanent magnet machines with yokeless stator	8
Bad data detection, identification and correction in distribution system state estimation based on PMUs	8
Phase-resolved partial discharge analysis of different types of electrode systems using machine learning classification	8
Utilization of reluctance torque for improvement of the starting and average torques of a brushless wound field synchronous machine	8
Design and analysis of optimal passive filters for increasing the harmonic-constrained hosting capacity of inverter-based DG systems in non-sinusoidal grids	8
3D modeling of winding hot spot temperature in oil-immersed transformers	7
Power management in hybrid electric vehicles using deep recurrent reinforcement learning	7
Study of inductively coupled fuel cell DMPPT converters	7
Design of novel coil structure for wireless power transfer system supporting multi-load and 2-D free-positioning	7
Evaluating stray current interference from DC traction lines on a pipeline network by means of a stochastic approach	7
Design and implementation of a high-efficiency low-voltage synchronous reluctance motor	7
Voltage Oriented Control and Direct Power Control Strategies in solving under and overvoltage conditions for heavy load application on Malaysian Distribution Representative Network	7
Error detection and correction to enhance the data rate of smart metering systems using Modbus-RTU	7
A generalized symmetrical MLI topology with improved commutation	7
Improvement of the induction motor sensorless control based on the type-2 fuzzy logic	7
Robust tracking control for permanent magnet linear servo system using intelligent fractional-order backstepping control	7
Incipient fault identification of distribution networks based on feature matching of power disturbance data	7
Solving dynamic distribution network reconfiguration using deep reinforcement learning	7
Current signal processing-based methods to discriminate internal faults from magnetizing inrush current	7
Intelligent computing of positive switching impulse breakdown voltage of rod-plane air gap based on extremely randomized trees algorithm	7
A performance study of a high-torque induction motor designed for light electric vehicles applications	7
Analysis and performance evaluation of a three-phase sparse neutral point clamped converter for industrial variable speed drives	7
Comparison parametric and non-parametric methods in probabilistic load flow studies for power distribution networks	7
The effect of the inclined lightning channel on electromagnetic fields and the induced voltages on overhead lines	7
Cybersecure and scalable, token-based renewable energy certificate framework using blockchain-enabled trading platform	7
Utilization of zirconia nanoparticles for improving the electrical and physical characteristics of HV porcelain insulating material	7
Comparatıve analysis of the magnet effects on the permanent magnet BLDC motor performance used in electric vehicles	7
Emission-averse techno-economical study for an isolated microgrid system with solar energy and battery storage	7
Temporal envelope detection by the square root of the three-phase currents for IM rotor fault diagnosis	7
Scheme for providing parity-time symmetry for low-frequency wireless power transfer below 20 kHz	7
Supercapacitor-based transient power supply for DC microgrid applications	7
A new deep learning method for the classification of power quality disturbances in hybrid power system	7
Feature extraction and power quality event classification using Curvelet transform and optimized extreme learning machine	6
High-performance single-input three-output DC–DC high gain converter for fuel cell-based electric vehicles	6
Understanding performance of transmission and distribution insulators at very low temperature conditions	6
Design and stability analysis of interleaved flyback converter control using Lyapunov direct method with FPGA implementation	6
Statistical analysis of induced magnetic fields on oil-impregnated insulation pressboards	6
Multiple power quality disturbances detection and classification with fluctuations of amplitude and decision tree algorithm	6
Reliability-constrained dynamic transmission expansion planning considering wind power generation	6

Least square estimator and IEC-60891 procedure for parameters estimation of single-diode model of photovoltaic generator at standard test conditions (STC)	6
Thermal aging management of underground power cables in electricity distribution networks: a FEM-based Arrhenius analysis of the hot spot effect	6
A random carrier frequency PWM technique with a narrowband for a grid-connected solar inverter	6
Smart scheduling of transmission line switching: optimization of multi-objective microgrid’s day-ahead energy scheduling with considering high penetration of green energies and INVELOX	6
Classification and localization of transmission line faults using curve fitting technique with Principal component analysis features	6
Improved hybrid current modulation for bidirectional power flow of single-stage dual active bridge AC/DC converter	6
An ensemble model for wide-area measurement-based transient stability assessment in power systems	6
Distribution network electric vehicle hosting capacity enhancement using an optimal power flow formulation	6
Speed tracking control design of a five-phase PMSM-based electric vehicle: a backstepping active fault-tolerant approach	6
Power balance modulation strategy for hybrid cascaded H-bridge multi-level inverter	6
DC-link sensorless control strategy for grid-connected PV systems	6
Oscillation analysis of low-voltage distribution systems with high penetration of photovoltaic generation	6
An improved controller for reactive power sharing in islanded microgrid	6
A new approach of tap changer maintenance incorporating nanoparticle insulating oil	6
A novel strategy for high performance fault tolerant control of shunt active power filter	6
Increasing renewable energy penetration in harmonically polluted distribution grids using passive filtering: a comparative assessment of common filter types	6
Design and development of Truncated Angle Variant (TAV) controller for multi-source-fed BLDC motor drive	6
Flashover discharges dynamic with continuous and discontinuous pollution layer under lightning impulse stress	6
Recognition of low-temperature overheating in power transformers by dissolved gas analysis	6
Cascaded H-bridge multilevel inverters optimization using adaptive grey wolf optimizer with local search	6
Analysis of stator and rotor currents and torque of induction machine with rotor-bar faults	6
Phasor estimation in power transmission lines by using the Kalman filter	6
Contemporary electric energy meters testing under simulated nonsinusoidal field conditions	6
Two designs for DC–DC stage of electric vehicle charging stations	6
Multi-input and multi-output bi-directional power converter for solar photovoltaic system	6
IM to IPM design transformation using neural network and DoE approach considering the efficiency and range extension of an electric vehicle	6
Energy-efficient field-oriented control for induction motors taking core losses into account	6
Robust cascade control of electrical drives using discrete-time chattering-free sliding mode controllers with output saturation	6
Design and controller implementation of 3.3 kW bridgeless boost-fed three-level resonant converter for EV battery charging	6
Calculated versus measured iron losses and instantaneous magnetization power functions of electrical steel	5
Overheating and discharge fault identification for novel three-element mixed oil–paper insulation system based on new characteristic gas combination parameters	5
Determination of single-phase transformer saturation characteristic by using Nelder–Mead optimization method	5
PV-tied three-port DC–DC converter-operated four-wheel-drive hybrid electric vehicle (HEV)	5
Determination of heat transfer coefficient of finned housing of a TEFC variable speed motor	5
A novel active snubber cell for soft-switched isolated PWM half-bridge converter	5
Efficient non-standard tripping characteristic-based coordination method for overcurrent relays in meshed power networks	5
A CPT system with switchable compensation for constant current or voltage output against load and coupling capacitance variations	5
A ZVS high step-up converter based on an integrated boost-cuk topology	5
Cascaded HVDC gaseous circuit breaker performance using black box arc model	5
Amelioration of power quality in a solar PV fed grid-connected system using optimization-based selective harmonic elimination	5
Model predictive flux control of six-phase permanent magnet synchronous motor with novel virtual voltage vectors	5
Three-phase inverters open-circuit faults diagnosis using an enhanced variational mode decomposition, wavelet packet analysis, and scalar indicators	5
Electrical and thermal power management in an energy hub system considering hybrid renewables	5
A new magnetic linked three-phase multilevel inverter with reduced number of switches and balanced DC sources	5
Speed sensorless maximum power point tracking technique for SEIG-based wind energy conversion system feeding induction motor pump	5
On-board power quality charger for electric vehicles with minimized switching stresses	5
Fault identification scheme for solar photovoltaic array in bridge and honeycomb configuration	5
Control of an active magnetic bearing system using swarm intelligence-based optimization techniques	5
Design, implementation and speed estimation of three-phase 2 kW out-runner permanent magnet BLDC motor for ultralight electric vehicles	5
Local flexibility market framework for grid support services to distribution networks	5
Optimal coordination of overcurrent relays with constraining communication links using DE–GA algorithm	5
Red deer optimized recurrent neural network for the classification of power quality disturbance	5
Efficiency improvement and reliability evaluation of small-scale PMSG-based wind energy conversion system using back-to-back T-type converter	5
Power conditioning using DSTATCOM in a single-phase SEIG-based isolated system	5
Investigation on the thermal properties, space charge and charge trap characteristics of silicone rubber nano–micro composites	5
Effects of currents decomposition on power calculation in nonsinusoidal conditions	5
Robust stator flux and load torque estimations for induction motor drives with EKF-based observer	5
An intelligent and cost-effective method for single-phase fault location in conventional distribution systems	5
Stator resistance estimation for MRAS-based speed sensorless vector-controlled switched reluctance motor drive	5
Commutation current ripple minimization of brushless DC motor drive based on programmed phase current references	5
Fault diagnosis for PV system using a deep learning optimized via PSO heuristic combination technique	5
PV-fed non-isolated resonant converter for DC microgrid applications	5
Possibilities of the stray current measurement and corrosive risk evaluation	5
Simulation of the effect of segmented axial direction magnets on the efficiency of in-wheel permanent magnet brushless DC motors used in light electric vehicles based on finite element method	5
An application of Wild Horse Optimizer to multi-objective energy management in a micro-grid	5
Multi‐year two-stage generation and transmission expansion planning: intermittent renewable energy sources integration for Brazilian interconnected power system	5
A general approach to sensorless estimation rotor and stator windings temperature in induction motor drives	5
Multi-objective chance-constrained transmission congestion management through optimal allocation of energy storage systems and TCSC devices	5
Forecasting the clearing price in the day-ahead spot market using eXtreme Gradient Boosting	5
Method for estimation of power losses and thermal distribution in power converters	5
A new robust tilt-PID controller based upon an automatic selection of adjustable fractional weights for permanent magnet synchronous motor drive control	5
Islanding event detection technique based on change in apparent power in microgrid environment	5
High performance sensor-less V/f control of surface PMSM in voltage vector plane with ZVV injection and SMO-based position estimation method	5
Decentralized control of autonomous DC microgrids with composite loads: an approach using optimal control	5
Pulse injection-based sensorless switched reluctance motor driver model with machine learning algorithms	5
Partial discharge detection using the fiber-optic Mach–Zehnder interferometer system for XLPE cables	5
Methodological development for the optimisation of electricity cost in cement factories: the use of artificial intelligence in process variables	5
Predictive current control of FL-shunt active power filter for dynamic and heterogeneous load compensation	5
RLC passive damped LCL single-phase voltage source inverter with capability to operate in grid-connected and islanded modes: design and control strategy	5
Stochastic hydrothermal unit commitment models via stabilized benders decomposition	5
Design of high efficiency low frequency wireless power transfer system for electric vehicle charging	5
Research and application of anti-offset wireless charging plant protection UAV	4
Effect of permanent magnet material on the electromagnetic performance of switched-flux permanent magnet machine	4
Performance evaluation of phase-shifting transformer for integration of renewable energy sources	4
Impact of wind power generation on ATC calculation with uncertain equal load	4
AC system’s strength evaluation of UHVDC system under hierarchical connection mode	4
High-impedance fault identification and location by using mode decomposition integrated adaptive multi-kernel extreme learning machine technique for distributed generator-based microgrid	4
Investigation of Voc and SoH on Li-ion batteries with an electrical equivalent circuit model using optimization algorithms	4
Security risk assessment of wind integrated power system using Parzen window density estimation	4
A frequency adaptive control scheme for a three-phase shunt active power filter	4
A reduced switch extendable-level inverter-fed open-end winding PMSM drive	4
Broadband finite-element impedance computation for parasitic extraction	4
Impacts of EV residential charging and charging stations on quasi-static time-series PV hosting capacity	4
A study on performance parameters of three-level T-type inverter based PMSM drives for electric vehicles applications	4
Implementation of a coordinated voltage control algorithm for a microgrid via SCADA-as-a-service approach	4