OOIR: Observatory of International Research

Papers

(The median citation count of Adsorption-Journal of the International Adsorption Society is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-03-01 to 2024-03-01.)

Article	Citations
Connecting theory and simulation with experiment for the study of diffusion in nanoporous solids	69
Dynamic column breakthrough experiments for measurement of adsorption equilibrium and kinetics	56
A review of common practices in gravimetric and volumetric adsorption kinetic experiments	43
Pulsed field gradient NMR diffusion measurement in nanoporous materials	38
Isosteric heat of adsorption from thermodynamic Langmuir isotherm	37
Analysis of direct capture of $${\hbox {CO}}_{2}$$ from ambient air via steam-assisted temperature–vacuum swing adsorption	36
Kinetics of liquid phase batch adsorption experiments	34
Single-molecule observation of diffusion and catalysis in nanoporous solids	29
The zero length column technique to measure adsorption equilibrium and kinetics: lessons learnt from 30 years of experience	29
A reference high-pressure CH4 adsorption isotherm for zeolite Y: results of an interlaboratory study	27
Uncertainty analysis of adsorption measurements using commercial gravimetric sorption analyzers with simultaneous density measurement based on a magnetic-suspension balance	25
Artefact peaks of pore size distributions caused by unclosed sorption isotherm and tensile strength effect	25
Adsorption for efficient low carbon hydrogen production: part 1—adsorption equilibrium and breakthrough studies for H2/CO2/CH4 on zeolite 13X	22
Pd-doped h-BN monolayer: a promising gas scavenger for SF6 insulation devices	22
Adsorption of hydrogen and carbon dioxide in zeolitic imidazolate framework structure with SOD topology: experimental and modelling studies	21
Surface barriers and symmetry of adsorption and desorption processes	20
Adsorption of nitrogen oxides on Al-doped carbon nanotubes: the first principles study	20
Effect of aluminum and sodium on the sorption of water and methanol in microporous MFI-type zeolites and mesoporous SBA-15 materials	20
A novel blended amine functionalized porous silica adsorbent for carbon dioxide capture	19
Low-cost novel silica@polyacrylamide composites: fabrication, characterization, and adsorption behavior for cadmium ion in aqueous solution	19
Intercalation and release of an anti-inflammatory drug into designed three-dimensionally layered double hydroxide nanostructure via calcination–reconstruction route	19
MIL-160(Al) MOF’s potential in adsorptive water harvesting	18
The role of hydroxyl and carboxyl functional groups in adsorption of copper by carbon nanotube and hybrid graphene–carbon nanotube: insights from molecular dynamic simulation	18
Effect of micropores on CO2 capture in ordered mesoporous CMK-3 carbon at atmospheric pressure	16
Steam adsorption on molecular sieve 3A for sorption enhanced reaction processes	15

Sorption kinetics: measurement of surface resistance	15
Assessment of the potential use of zeolites synthesized from power plant fly ash to capture CO2 under post-combustion scenario	14
NMR imaging and diffusion	14
Enhancing hydrogen storage by metal substitution in MIL-88A metal-organic framework	14
Diffusion in nanopores: inspecting the grounds	13
Chemical modification of the polymer of intrinsic microporosity PIM-1 for enhanced hydrogen storage	13
Effect of the surface hydration of clay minerals on the adsorption of cesium and strontium from dilute solutions	12
Model-based optimization strategies for chromatographic processes: a review	12
Investigations of mechanism of Ca2+ adsorption on silica and alumina based on Ca-ISE monitoring, potentiometric titration, electrokinetic measurements and surface complexation modeling	11
Process intensification of the high-purity nitrogen production in twin-bed Pressure Swing Adsorption plants	11
Experimental design of a “Snap-on” and standalone single-bed oxygen concentrator for medical applications	11
Interaction of propylthiouracil, an anti-thyroid drug with boron nitride nanotube: a DFT study	11
Experimental study of a rotary valve multi-bed rapid cycle pressure swing adsorption process based medical oxygen concentrator	11
Measurement and interpretation of unary supercritical gas adsorption isotherms in micro-mesoporous solids	11
Adsorption for efficient low carbon hydrogen production: part 2—Cyclic experiments and model predictions	10
Identification of mass transfer resistances in microporous materials using frequency response methods	10
Accurate blank corrections for zero length column experiments	10
Biomethane production by adsorption technology: new cycle development, adsorbent selection and process optimization	10
Diffusion in nanopores: correlating experimental findings with “first-principles” predictions	9
Quantitative imaging of gas adsorption equilibrium and dynamics by X-ray computed tomography	9
Insights of adsorption isotherms with different gases at 77 K and their use to assess the BET area of nanoporous silica materials	9
Characterization of mesoporous region by the scanning of the hysteresis loop in adsorption–desorption isotherms	9
Modelling binary non-linear chromatography using discrete equilibrium data	9
Thermodynamics of methane adsorption on carbon adsorbent prepared from mineral coal	8
Diffusion coefficients in nanoporous solids derived from membrane permeation measurements	8
Hydrogen and deuterium separation on metal organic frameworks based on Cu- and Zn-BTC: an experimental and theoretical study	8
Hydrogen purification by Mg alloy hydrogen adsorbent	8
Assessment of process configurations to combine enantioselective chromatography with enzymatic racemization	8
Structural similarity, synthesis, and adsorption properties of aluminum-based metal-organic frameworks	8
Dynamics studied by Quasielastic Neutron Scattering (QENS)	8
Hydrophobic activated carbon for elevated-temperature pressure swing adsorption	8
An evaluation on S-type adsorption isotherm in the model of crosslinked polyhydroxamates/oxazine dyes/water interactions	8
Modeling fluids confined in three-dimensionally ordered mesoporous carbons	8
Effects of operating temperature on the performance of small scale rapid cycle pressure swing adsorption air separation process	8
Effect of intermittent purge on O2 production with rapid pressure swing adsorption technology	7
Performance determination of high-purity N2-PSA-plants	7
Application of the simple Bayesian classifier for the N2 (77 K) adsorption/desorption hysteresis loop recognition	7
Temperature and pressure dynamics in sorption cells	6
Potentials and challenges of high-field PFG NMR diffusion studies with sorbates in nanoporous media	6
Application of microimaging to diffusion studies in nanoporous materials	6
Integrated uncertainty quantification and sensitivity analysis of single-component dynamic column breakthrough experiments	6
Isotropic and anisotropic properties of adsorption-induced deformation of porous carbon materials	6
Activity coefficient models for accurate prediction of adsorption azeotropes	6
Graphitic carbon nitride functionalized with four boron atoms for adsorption and separation of CO2/CH4: DFT calculations	6
Monte Carlo simulations of simple gases adsorbed onto graphite and molecular models of activated carbon	6
The H+ ions and static electric field effects on the adsorption and detection of cyanogen fluoride on the surface of boron nitride nanocage: a DFT, TD-DFT study	6
Value added utilization of ferronickel slags as raw materials of 4A zeolite for CO2 reduction	6
Dynamic simulation of high-purity twin-bed N2-PSA plants	6
Equilibrium and dynamic investigation of butanol adsorption from acetone–butanol–ethanol (ABE) model solution using a vine shoot based activated carbon	6
Adsorption of cytarabine and gemcitabine anticancer drugs on the BNNT surface: DFT and GD3-DFT approaches	5

Ionic liquid loaded polyether sulfone microspheres for CO2 separation	5
Characterization of resorcinol–formaldehyde hydrogel as adsorbent for cesium ion	5
Absolute adsorption and adsorbed volume modeling for supercritical methane adsorption on shale	5
Comment on the applicability of the Gurvich rule for estimation of pore volume in microporous zeolites	5
Non-thermal plasma-assisted catalytic CO2 conversion over Zn-TCPP 2D catalyst	5
Estimation of isosteric heat of adsorption from generalized Langmuir isotherm	5
Exploring the multiple solutions of the classical density functional theory using metadynamics based method	5
Novel high capacity model for copper binary ion exchange on e-waste derived adsorbent resin	5
Impact of high adsorbent conductivity on adsorption of polar molecules: simulation of phenol adsorption on graphene sheets	5
Effect of pellet size on PSA performance: monolayer and multilayer bed case study for biogas upgrading	5
The binding interaction of protein on a charged surface using Poisson–Boltzmann equation: lysozyme adsorption onto SBA-15	4
On the use of single, dual and three process langmuir models for binary gas mixtures that exhibit unique combinations of these processes	4
Nitrogen rejection from landfill gas using Pressure Swing Adsorption	4
Adsorption kinetics and equilibria of two methanol samples with different water content on activated carbon	4
Simulation and energy consumption comparison of gas purification system based on elevated temperature pressure swing adsorption in ammonia synthetic system	4
Study of energy density of adsorption-based thermal energy storage system under different operating conditions for SAPO-34	4
Capillary bridge formation between hexagonally ordered carbon nanorods	4
Dynamics in nanoporous materials probed by 2H solid state NMR: estimation of self-diffusion coefficients	4
Self-assembly of the surfactant mixtures on graphene in the presence of electrolyte: a molecular simulation study	3
Non-porous organic crystals and their interaction with guest molecules from the gas phase	3
Physicochemical approach for the modification of medical nanoporous carbon sorbents	3
Modelling of adsorption technologies for controlling indoor air quality	3
Influence of the main operating parameters on the DRPSA process design based on the equilibrium theory	3
Diffusion and reaction in pore hierarchies by the two-region model	3
Comparative performance of industrial-scale oxygen production by pressure swing adsorption and vacuum pressure swing adsorption under plateau environment	3
Effects of phase, strain, pressure, vacancy, and doping on the adsorption of metallic radionuclides on monolayer 2H-MoS2	3
Adsorption characteristics and thermodynamic property fields of methane and Sichuan Basin shales	3
Comparing column dynamics in the liquid and vapor phase adsorption of biobutanol on an activated carbon monolith	3
Evaluation of surface energetics of zirconium-containing mesoporous silica using novel universal isotherm model	3
Mesoporous metal–organic framework MIL-100(Fe) as drug carrier	3
Modeling and optimal design of multicomponent vacuum pressure swing adsorber for simultaneous separation of carbon dioxide and hydrogen from industrial waste gas	3
CO2 capture by ethanolamines functionalized resins: amination and kinetics of adsorption in a fixed bed	2
In-situ cost-effective synthesis of zeolite A in Al2O3–SiO2 glass fibers for fixed bed adsorption of Cu2+, Cd2+ and Pb2+	2
Breakthrough dynamics of nitrogen, oxygen, and argon on silver exchanged titanosilicates (Ag-ETS-10)	2
Liquid adsorption and immersion of two alcohol–water mixtures on carbon molecular sieves	2
Extracting adsorbate information from manometric uptake measurements of hydrogen at high pressure and ambient temperature	2
Hopping dynamics and diffusion of atoms, molecules, and ions in nanoporous solids by exchange NMR spectroscopy	2
Experimental and theoretical investigation of the Na+ → Li+ cation exchange in mordenite and its effect on CO2 adsorption properties	2
Adsorption properties of biochars obtained by KOH activation	2
Correction to: The effect of atomic point charges on adsorption isotherms of CO2 and water in metal organic frameworks	2
Evolution of adsorption isotherm and isosteric heat from sub-triple to super-critical points	2
Economic assessment of a natural gas upgrading process using pressure vacuum swing adsorption for nitrogen removal	2
Synergies between adsorption and energy conversion technologies	2
Adsorbed natural gas storage facility based on activated carbon of wood waste origin	2
Reference surface excess isotherms for carbon dioxide adsorption on ammonium ZSM-5 at various temperatures	2
Water adsorption in fresh and thermally aged zeolites: equilibrium and kinetics	2
Prediction of affinity coefficient for estimation of VOC adsorption on activated carbon using V-matrix regression method	2
Adsorption of organic solvent vapours on carbon nanotubes, few-layer graphene nanoflakes and their nitrogen-doped counterparts	2
Small molecule substances as molecular probes of structure and texture of coal under sorption process and modelling	2
Multiscale design of a pressure swing adsorption process for natural gas purification	2