Applied Composite Materials

Papers
(The median citation count of Applied Composite Materials is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Design of Z-fiber Guiding Needle for Composite Material Preform with Large-Thickness and High-Density62
A Novel Topology Optimization of the Frame Mold for Composite Autoclave Process59
Unique Synergy for Low Velocity Impact Deformation Reduction in Dyneema®-Carbon Intraply-Interlayer Hybrid Composite Panel54
Influence of Substrate Location on Mechanical Behaviour of Glass Fibre Composite Materials with Embedded Printed Electronics38
About Shear Properties of Plain Weave Fabric CFRP at High Temperatures: Analytical and Experimental Approaches37
Investigating the Influence of Tufting Parameters on the Lap Joint Strength of Composite Parts Assembled Using Tufting Technology33
Failure Analysis and Process Optimization in Hydroforming of Fiber Metal Laminates: An Experimental and Numerical Investigation29
Quantitative Damage Monitoring of Filament Wound Composites by Using Machine Learning-Based Techniques25
Physico-chemical Characterization of PLA-based Composites Holding Carbon Nanofillers25
Revealing the Process-Structure-Property Correlations in Fused Deposition Modeling of Short Fiber Filled Composites via Fiber Orientation Analysis24
Preliminary Investigation of High Density Polyethylene Reinforced with Spruce and Beech Fibers for Power Transmission Technologies24
Simulation Study on Compression Properties of Needle-Punched Carbon/Carbon Composites after High Temperature Oxidation23
Thermal Conduction Behaviors of Single-ply Broken Twill Weave Reinforced Thermally Induced Resin-based Shape Memory Polymer Composites: Multi-scale Method Analysis and Laser Flash Analysis21
Numerical Investigation on the Influences of Processing Conditions on Damage in the CFRTP Cutting Using a Novel Elastic–plastic Damage Model21
A Novel Composite Design Optimization Method for Minimized Manufacturing Cost with Improved Performances20
Numerical Simulation of the Damage Characteristics of Carbon fiber-reinforced Aluminum Laminates under Hypervelocity Impact Based on the FE-SPH Adaptive Method18
Induction Heating of CFRP Based on Macro-Microscopic Combination of Dynamic Superposition Magnetic Fields18
Assessment of the GFRP/Ti Hybrid Stack Drilling Under High-speed Cutting and Cooled-compressed Air18
On the Effects of Anisotropy in Detecting Flaws of Fibre-Reinforced Composites17
Digital Image Correlation (DIC) Validation of Engineering Approaches for Bending Stiffness Determination of Damaged Laminates17
Moisture Absorption Characterization and Mechanical Properties of CFRP Under the Combined Effects of Seawater and Continuous Bending Stress17
A Non-linear Mean-Field Debonding Model at Large Strains for the Analysis of Fibre Kinking in UD Composites17
Evaluating Extrusion Deposited Additively Manufactured Fiber-Reinforced Thermoplastic Polymers as Carbon/Carbon Preforms16
Empirical Characterization and Modeling of Cohesive – to – Adhesive Shear Fracture Mode Transition due to Increased Adhesive Layer Thicknesses of Fiber Reinforced Composite Single – Lap Joints16
Advances in Preparation Methods and Conductivity Properties of Graphene-based Polymer Composites16
Nonlinear Effective Dielectric Properties of Barium Strontium Titanate Composites from 300MHz to 4GHz15
Environmentally Resistant Flax Fiber-Reinforced Composites for Aircraft Applications: Aviation Stress Tests with Optical and Mechanical Analyses15
Correction: Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-Based Battery Enclosures for Crashworthiness15
Thermoplastic Polyurethane Reinforced with Continuous Carbon Fiber Tows: Manufacturing Technique and Fabric Property Evaluation14
Tensile Properties of Scarf-Repaired Composite Laminates with Bonding Defects14
Damage Resistance of Honeycomb Sandwich Composites under Low-Energy Impact13
High-Biocontent Polymer Blends and Their Wood Plastic Composites: Blending, Compatibilization, and Their Recyclability13
The Strain Rate Effect on the Compression Properties of Basalt/Carbon Fiber Reinforced Composites12
Simulated Analysis of Lightning-induced Mechanical Damages in Fiber Reinforced Composites Based on a Pyrolysis-affected Damage Constitutive Model12
Optimal Design Study of Vibro-Acoustic Resistance of Porous Foam Composite Laminates12
A Two-Stage Genetic Algorithm for Molding Parameters Optimization for Minimized Residual Stresses in Composite Laminates During Curing12
Special Issue: Advanced Modeling and Design for Composite Materials and Structures12
Research on the Influence of Yarn Reduction on the Bending Performance of Three-dimensional Woven Composites12
Free and Forced Vibration Analysis of Carbon/Glass Hybrid Composite Laminated Plates Under Arbitrary Boundary Conditions11
Enhancing the Impact Resilience of Subzero Composite Laminates by Novel Recycled Milled Hybrid Fillers11
Experimental Characterization of Short Fiber-Reinforced Composites on the Mesoscale by Indentation Tests11
3D Weaving Process for Composite Reinforcements: Critical Yarn Crossings11
Damage-Caused Residual Curvatures in Symmetric Cross-Ply Laminates11
Development of a Flexible Porous GNP-PDMS Composite: Tunable Thermal and Electrical Properties for Novel Applications11
Effects of Energy Director Types on the Interface Morphology and Tensile Properties of Ultrasonically Welded CF/PAEK Joints11
Thermal Frontal Polymerization in Polymer Composites: Numerical Simulation and the Role of Fe3O4 Nanoparticle Fillers11
Compressive Properties and Failure of Aluminum/Epoxy Resin Interpenetrating Phase Composites Reinforced by Glass Fiber10
Advances in Creep Behaviors of Textile Composites10
Out-of-Plane Stiffness Analysis of Kevlar/Carbon Fiber Hybrid Composite Skins for a Shear Variable-Sweep Wing10
Experimental Investigation of Mechanical Properties of Additively Manufactured Fibre-Reinforced Composite Structures for Robotic Applications10
Optical Material Characterisation of Prepreg CFRP for Improved Composite Inspection10
Identification of Spatial Modulus Distribution of Chopped Carbon Fiber Tape-reinforced Thermoplastic Structures Using Modal Test-based Inverse Analysis10
Research Status of 3D Braiding Technology10
Multi-failure Analyses of Carbon-fiber-reinforced Miura-ori Core Sandwich Panels Subjected to In-plane Compressive Load10
Fabrication of Foldable Composite Structures Obtained by Selective Curing of Prepregs Made of Long-fibre Reinforcements Impregnated with UV-curable Resin System9
Characterization and Modeling Damage and Fracture of Prepreg-MI SiC/SiC Composites under Tensile Loading at Room Temperature9
Investigating the Effects of Contact Area and Chamfering on the Failure Behavior of Plain Woven Composite-Metal T-joints9
High-strain-rate Response of GFRP Composites Impregnated with Multiwalled Carbon Nanotube Reinforced Shear Thickening Fluid9
Additive Manufacturing of Carbon Fiber-reinforced Composites: A Review9
Exploring Flexural Performances of Fused Filament Fabrication 3D-Printed ABS and ABS-Composites through Innovative Bio-Inspired Processing Parameter Optimization9
Drop-Weight Impact of Composite Laminates: Modelling the Effect of a Round-Nosed Versus a Flat-Ended Impactor9
Mechanical Response of CFRP Laminates Subjected to Low-Velocity Oblique Impact9
A Multiscale Method Across Three Length Scales for Progressive Damage Analysis of Plain Woven Composites9
Tensile Failure Analysis of Carbon Fiber Composite Material L-shaped Joint8
Approaches to X-ray CT Evaluation of In-Situ Experiments on Damage Evolution in an Interpenetrating Metal-Ceramic Composite with Residual Porosity8
Numerical Simulation of the Thermal Response of the Composite Layer of Type III Gas Cylinders Under Local Thermal Impacts8
Design Engineering of High-Energy Absorbent Aircrew Helmet Using 3D Woven Structural Composite8
The Effect of Particle System on Quasistatic Compression Behavior and Damage Accumulation of High Solids Loading Polymer-Particle Composites8
Physics-Based Modeling and Experimental Study of Conductivity and Percolation Threshold in Carbon Black Polymer Nanocomposites8
3D Knitted Preforms Using Large Circular Weft Knitting Machines8
Impact of the Manufacturing Process on the Flexural Properties of Laminated Composite-Metal Riveted Joints: Experimental and Numerical Studies8
Dynamic Fracture Toughness and Damage Monitoring in Hybrid Composites8
3D Fabrics with Negative Poisson’s Ratio: A Review8
The Design of Cellular Fabrics with Graded Cell Distribution8
Energy-absorption Characteristics of Nacre-inspired Carbon/Epoxy Composite Tubes under Impact Loading8
A Coupled Elastoplastic-Damage Analytical Model for 3D Resin-Matrix Woven Composites8
Effects of Fiber Architectures on the Impact Resistance of Composite Laminates Under Low-Velocity Impact8
Optimal Design Method and Experiment for Improved Wedge-Type Anchors of Large-Diameter Smooth CFRP Tendons7
Evaluation of Effect of Tape Edges on Tensile Properties of Chopped Carbon Fiber Tape Reinforced Thermoplastics by X-ray Grating Interferometry7
Numerical Analysis of Thermoplastically Welded CFRP Structures7
Damping Model of Fiber Reinforced Composites and Factors Affecting Damping and Dynamic Response7
Improving Surface Property of Carbon Nanotube Grown Carbon Fiber by Oxidization Post-treatment7
Predictive Model for Creep Behavior of Composite Materials Using Gene Expression Programming7
Accelerated Ageing Effects on Short-Beam Strength Behavior of Pultruded CFRP Rods7
On the Strengthening of Pultruded GFRP Connections Using Glass Fiber Sheets: A Study on the Influence of Bolt Diameter7
Unsupervised Machine Learning for Automatic Image Segmentation of Impact Damage in CFRP Composites7
Investigation on the Reliability of a Thermal Protection System Based on Mullite Fiber Insulation Tiles Coated with MoSi2-borosilicate Glass in an Aerothermal-Vibration Coupling Environment7
Design and Strengthening Mechanisms of Dual-Phase Lattice Energy-Absorbing Structure Based On Shear-Banding Controlling7
Biomimetic Approach for the Production of 3D Woven Spherical Composite Applied in Apparel Protection and Performance7
Thermomechanical Modelling and Strength Assessment of C/C-SiC Composite Brake Disc7
Comparison of Static/Dynamic Loading and Tensile Behavior of Interply and Intraply Hybridized Carbon/Basalt Epoxy Composites7
Experimental Investigation of the Interlaminar Failure of Glass/Elium® Thermoplastic Composites Manufactured With Different Processing Temperatures7
Development and Standardization of Testing Equipment and Methods for Spacer Fabrics7
Size Effect of Strength for SiC/SiC Composites: Experimental Study and Theoretical Analysis6
Analytical Solutions to Predict Impact Behaviour of Stringer Stiffened Composite Aircraft Panels6
Blast Response and Optimization Design of Polyurea-Coated Auxetic Honeycomb Sandwich Panels6
Experimental Method to Determine the Draping Behavior of Auxiliary Materials for the Vacuum Bagging of CFRP Parts on Doubled-Curved Surfaces6
Numerical Investigation of Dynamic Response and Failure Mechanisms for Composite Lattice Sandwich Structure under Different Slamming Loads6
Experimental and Numerical Study of Composite Honeycomb Sandwich Structures Under Low-Velocity Impact6
Evaluation of the Piezoresistive Response of GFRP with a Combination of MWCNT and GNP Exposed to Seawater Aging6
An Effective Method of Modeling the Deformation Behavior of Polymer Sandwich Structures with Adhesive Joints6
Correction: Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-Based Battery Enclosures for Crashworthiness6
Fracture Analysis of Clamped Tapered Beam Specimen under Static Loading by Regularized Extended Finite Element Method in Abaqus Implementation6
Strengthening of Multi-bolted Connections in Pultruded GFRP by Glass Fiber Sheets: An Experimental Study6
Correction to: Experimental and Numerical Study of Ballistic Resistance of Composites Based on Sandwich Metallic Foams6
Applied Finite Element Procedure for Morphing Wing Design6
Review on Mechanical Performance of Fibre-Reinforced Plastics in Marine Environments6
On the Use of Machine Learning for Damage Assessment in Composite Structures: A Review6
Investigating the Influence of SiC Particle Characteristics on the Mechanical Properties and Damage Behaviors of SiCp/A356 Composites6
Tensile-Compressive Asymmetric Mechanical Properties and Constitutive Model of HTPB Propellant6
Weft Yarn Interlacement Modelling for 3D Profiled Structures6
Meso-Geometric Modeling and Failure Behavior of 2.5D Three-Harness-Twill Warp-Reinforced Woven Composites6
Quasi-static Indentation Behavior of Kevlar-Hemp and Kevlar-PALF Composites: Influence of Weaving Architecture and Intra-ply Hybridization6
Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-Based Battery Enclosures for Crashworthiness5
Correction to: On the Difference Between the Tensile Stiffness of Bulk and Slice Samples of Microstructured Materials5
Comparison of X-ray Computed Tomography and Ultrasonic C-Scan Techniques and Numerical Modelling of Impact Damage in a CFRP Composite Laminate5
Microstructure and Damping Behavior of Continuous W-Core-SiC Fiber-Reinforced Aluminum Matrix Composites5
Effect of Exposure Time to UV Radiation on Mechanical Properties of Glass/Epoxy Composites5
Response Surface Model for Mechanical Properties of Robotically Stitched Composites5
Low Velocity Impact Response of Carbon Fiber Composite Laminates with Surface Glass Fibers5
An Experimental Characterisation on Rectangular Z-Pinned Parameters in the Dynamic Modal Responses of Reinforced Composites5
Tensile Creep Performance of PVC Flexible Composites Reinforced With Aramid Warp-Knitted Fabrics From Various Architectures5
Assessment of Delamination Damage in Carbon Fibre Reinforced Polymer Composites with a Fastener Under Multiple Lightning Strike Conditions5
Manufacture of High-Performance Tidal Turbine Blades Using Advanced Composite Manufacturing Technologies5
Thermal Characterization of Polyester Resin Composites Loaded with Graphite Rod-like Inclusions Using Front-Face Laser-Flash Thermography5
Numerical Prediction of Three-Point Bending of Braided Composite Tubes With Axial Yarns5
Numerical Investigation of the Effect of Open Holes on the Impact Response of CFRP Laminates5
High-Velocity Impact Behavior of Aramid/S2-Glass Interply Hybrid Laminates5
Mechanical Properties and Damage Behavior of Polypropylene Composite (GF50-PP) Plate Fabricated by Thermocompression Process Under High Strain Rate Loading at Room and Cryogenic Temperatures5
Electrical and Shielding Properties of Epoxy Composites with Combined Fillers (SiO2-Fe2O3)/CNT and (SiO2-Fe3O4)/CNT5
Thermal Response of Carbon Fiber Reinforced Polyimide Composite Laminate Coated with Highly Oriented Graphite Film Under Heating on Single Side4
Advanced 3D Textile Applications for the Building Envelope4
Damage Behavior in Unidirectional CFRP Laminates with Ply Discontinuity4
Recent Advances in Hygrothermal Aging of Plant Fiber Reinforced Composites4
Glass and Aramid Fibre-reinforced Bio-based Polymer Composites Manufactured By Vacuum Infusion: A Statistical Approach to Their Physical and Mechanical Properties4
Fatigue Characterization of Composite Laminates with Interface Hybrid Toughening Using a Single-Step Joint Configuration4
Experimental Study on the Ballistic Resistance of S-shaped CFRP Foldcore Sandwich Structure against Flat-Nosed Projectile Impacts4
Microwave Absorption and Mechanical Properties of CNTs/ PU Composites with Honeycomb Structure4
Characterization of Mechanical and Damping Properties of Carbon/Jute Fibre Hybrid SMC Composites4
Residual Compressive Strength of Aluminum Honeycomb Sandwich Structures with CFRP Face Sheets after Low-velocity Impact4
Micromechanical Analysis and Experimental Studies of Thermal Residual Stress Forming Mechanism in FRP Composites4
The Effect of Hydrothermal Aging on the Low-Velocity Impact Behavior of Multi-Walled Carbon Nanotubes Reinforced Carbon Fiber/Epoxy Composite Pipes4
Prediction of Cohesive Zone Length and Accurate Numerical Simulation of Delamination under Mixed-mode Loading4
Retained Hygrothermal State Compression Damage Behavior Investigation of Carbon Fiber Reinforced Composites4
Physics-based Computational Method Predicting the Dielectric Properties of Polymer Nanocomposites4
Effect of Different Z-directional Fibers on Mechanical Properties of Composites Using Numerical and Experimental Tests4
Notch Shape Influence on Damage Evolution of Al/CFRP Laminates Under Tensile Loading: Experimental and Numerical Analysis4
Observation of Damage Initiation for Trans-laminar Fracture Using in situ Fast Synchrotron X-ray Radiography and ex situ X-ray Computed Tomography4
Strain-rate Dependence of Electrically Modified Unidirectional Carbon/epoxy Laminates Under In-plane Tensile Loading4
Low-Velocity Impact and Residual Compression Performance of Carbon Fiber Reinforced Composite Stiffened Plates4
Advances and Future Prospects of Adhesive Bonding and Co-Consolidation Technologies for Aviation Carbon Fiber Thermoplastic Composites4
Moisture Diffusion, Compression and Degradation Mechanisms of Alfa Natural Fibers (Stipa tenacissima L.) Reinforced Epoxy: Experimental, Morphological and Numerical Analysis4
Analysis of Residual Post-Impact Compressive Strength of Composite Laminates Under Hygrothermal Conditions4
Impact Response of 3D Orthogonal Woven Composites with Different Fiber Types4
Manufacturing and Experimental Evaluation of Microwave Cured Carbon/Epoxy Composites4
Effect of Z-Pinning on the Tensile and Impact Properties of Skin-Stringer via a ZPI (Z-Pin Pre-Hole Insertion) Process4
A Progressive Oxidative Damage Model of C/SiC Composites under Stressed Oxidation Environments4
Manufacture and Bending Test of a Cylindrical Laminated Tube with Integrally Formed Ring Flanges4
Impact and Post-Impact Damage Response of Interlayer Nonwoven Reinforced Hybrid Composites4
Structure Effect on Damage Evolution of 3-D Angle-interlock Woven Composites Under Low-velocity Impact By Coupled DIC Analysis and Numerical Study4
Experimental and Finite Element Simulation of Torsional Performance of Skin-core Carbon Fiber-reinforced Composite Rod4
Structure Design and Performance Evaluation of Fibre Reinforced Composite Honeycombs: A Review4
Mechanical Properties of Epoxy- and Dicyclopentadiene-Based Carbon-Fiber-Reinforced Plastics at Low and Room Temperatures4
Structural Optimization Design of a Typical Adhesive Bonded Honeycomb-Core Sandwich T-joint in Side Bending Using Multi-Island Genetic Algorithm4
Development of Wireless Self-heating Tooling for Polymer Composites Using Microwave Technology4
Failure Analysis of Glass/Epoxy Composite Subjected to Different In-Plane Biaxial Loading Conditions4
Experimental and Numerical Study of Ballistic Resistance of Composites Based on Sandwich Metallic Foams4
Failure Analysis of Particle Reinforced Aluminum Matrix Composite With a Microscopic Mechanical Model Using Modified GTN Model3
Effects of Void Defects on Fracture Features and Tensile Strength of C/SiC Composites: an Image-based FEM Study3
Micromechanical Analysis of SiC/Ti6Al4V Composite Under Complex Stress State3
Advancement in Design and Failure Analysis of Aluminium Foam-filled Honeycomb Crash Absorbers3
Effect of Temperature on the Mixed mode I/II Translaminar Fracture of Epoxy Composites Reinforced with Cotton Fibers3
Basalt Fiber-Reinforced Epoxy Laminates: Improvement in Quasi-Static and Fatigue Properties with Modified Matrices and Fiber Surfaces Using Silica Nanoparticles3
Effect of Embedded Shape Memory Alloy (SMA) on the Low-velocity Impact Behaviour of Stringer Stiffened Composite Plates3
Nanoplatelet Orientation and Young’s Modulus of Graphene/Phenoxy Nanocomposites3
Optimization of Hot Gas Welding of Hybrid Thermoplastic-Thermoset Composites Using Taguchi Method3
Compression Property of Three-dimensional Honeycomb-structured Fabric Composites3
Experimental Investigation on the Effect of Carbon Fiber Reinforcements in the Mechanical Resistance of 3D Printed Specimens3
An Elastoplastic-Damage Micromechanical Model and its Application to the Mechanical Analysis of SiC Fibre-reinforced Titanium Matrix Composite under Complex Stress States3
Zero-Poisson's-Ratio Honeycomb-Filled Braided Textile Reinforced Conical Tubes: Designing, Manufacturing and Testing3
Mechanical Modeling of Transverse Constitutive Relationship of Yarns in Plain-woven SiC/SiC Composites at the Mesoscale3
Influence of Fiber Orientation and Fillers on Low Velocity Impact Response of the Fabric Reinforced Epoxy Composites3
Tensile Behavior of Double-Hole CFRP Composite with Different Holes Position3
Translaminar Cracking Modeling in Woven-ply Thermoplastic Laminates in Tension and in Compression3
A Review of Machine Learning for Progressive Damage Modelling of Fiber-Reinforced Composites3
Performance Optimization of Sol-Derived C/Mullite Composites by Reducing the Sintering Shrinkage of Mullite Matrix3
A Novel Slot Die and Impregnation Model for Continuous Fiber Reinforced Thermoplastic UD-tape3
Manufacturing Demonstration of Automotive Seat Backrest Using Sheet Molding Compound and Overmolding with Continuous Reinforcement3
Design and Development of 2D Woven Auxetic Fabric and Composites Based on Wave Form Geometry3
Experimental Study on Impact Damage Resistance and Residual Compression Behaviors of Scarf Repaired Composite Plates3
The Influence of Trigger Angle Structure on the Energy Absorption Capabilities of Aluminum Alloy/Thermoplastic Reinforced Polypropylene Hybrid Tubes3
A Thermally Self-healing and Recyclable Polyurethane by Incorporating Halloysite Nanotubes via In Situ Polymerization3
Effect of Carbon Black on the Strain Sensing Property of 3D Printed Conductive Polymer Composites3
Effect of Process Parameters on the Quality of Additively Manufactured PETG-Silk Composite3
Application of Ultrasonic Technique for Cure Monitoring of Epoxy/Graphene Oxide–Carbon Nanotubes Composites3
Saltwater Immersion Effects on Bio-Composites Reinforced With Seashell Powders3
Foam-Filled Double-Layer Woven Lattice Truss Sandwich Panels: Manufacturing, Testing and Composite Effects3
Characterization of The Damage Mechanism of Glass/Epoxy Composite Tubes Under Quasi-Static Axial Loading Using Acoustic Emission Monitoring3
Development of Hybrid Aluminum/ Carbon Fiber/ Pineapple Leaf Fiber Laminates Using Vacuum Assisted Resin Transfer Molding (VARTM) For Automotive Applications3
Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites3
Editorial3
Measurement of the Flexural Modulus of Chopped Carbon Fiber Tape Reinforced Thermoplastic with Short Beams3
Fracture Toughness of Hybrid Carbon Fibre/Epoxy Enhanced by Graphene and Carbon Nanotubes3
On the Influence of the Functionalization of Graphene Nanoplatelets and Glass Fiber on the Mechanical Properties of GFRP Composites3
Influences of Combined Section in Three-dimensional Networked Fabric against Ballistic Impact3
3D Warp Interlock Fabric Structure and their Applications in Soft and Hard Armour Protections2
Influence of Low and Extreme Heat Fluxes on Thermal Degradation of Carbon Fibre-reinforced Polymers2
Effect of Aramid Fiber on the Properties of Glass Fiber-Reinforced Composite for Cryogenic Applications2
The Relationship Between the Extent of Indentation and Impact Damage in Carbon-Fibre Reinforced-Plastic Composites after a Low-Velocity Impact2
Mussel Inspired Modification of Rubber Crumbs for Improved Interfacial Adhesion in Rubber Cement Mortar2
A New General Framework for Response Prediction of Composite Structures Based on Digital Twin with Three Effective Error Correction Strategies2
Feasibility of Embedded Distributed Optical Fibre Sensors in Thermoplastic Composite Braided Beam Structure2
Highly Sensitive Flexible Strain Sensor Based on a Double-percolation Structured Elastic Fiber of Carbon Nanotube (CNT)/Styrene Butadiene Styrene (SBS) @ Thermoplastic Polyurethane (TPU) for Human Mot2
Experimental and Numerical Investigation of the Geometrical Effect on Low Velocity Impact Behavior for Curved Composites with a Rubber Interlayer2
Sandwich Structures Made of Discarded Bottle Caps Core and Hybrid Glass Fibre Composite Skins2
Macroscopic Forming Simulation for a Unidirectional Non-crimp Fabric Using an Anisotropic Hyperelastic Material Model2
Developing Test Methods for Compression after Lightning Strikes2
Mechanical Performance of Recycled Woven Basalt Fiber-Reinforced Composites for Sustainable Manufacturing Applications2
Experimental Assessment of Low Velocity Impact Damage in 3D Angle-Interlock Woven Kevlar/Epoxy Composite Using DIC Analysis2
Correction: Drop-Weight Impact of Composite Laminates: Modelling the Effect of a Round-Nosed Versus a Flat-Ended Impactor2
Experimental Study on Surface Quality in Ultrasonic-assisted Grinding of C/C-Zrc-Cu Composites Fabricated with Different Preforms2
Applied Composite Materials Special Memorial Issue on Structural Integrity of Engineering Composite Materials2
Damage Recognition of Acoustic Emission and Micro-CT Characterization of Bi-adhesive Repaired Composites Based on the Machine Learning Method2
Mechanical Behavior and Deformation Mechanism of Aluminum/Gf/Polyamide Laminates Under Dynamic Strain Aging2
Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): a Review2
Influence of Geometric Parameters on Flatwise Compression Properties of a Novel Lattice Sandwich2
Improvement of Force History Pattern in Composite Tubular Structures by Developed Trigger Mechanisms2
Creep and Aging Evaluation of Phenol–Formaldehyde Carbon Fiber Composites in Overhead Transmission Lines2
Three-Dimensional Analysis of Porosity in As-Manufactured Glass Fiber/Vinyl Ester Filament Winded Composites Using X-Ray Micro-Computed Tomography2
A Plane-Stress Damage Model for Vectran Laminated Composite2
A Comparison of Internal Mandrel Designs for Rotary Draw Bend Forming of Carbon-fibre/Thermoplastic (PA6) Tubular Structures2
Shear-driving Force and Critical Shear Angle Analysis of Kevlar/Carbon Fiber Hybrid Composite Skins for a Shear Variable-sweep Wing Based on the Classical Plate Theory2
Enhancing the Robustness of Hybrid Metal-Composite Connections Through 3D Printed Micro Penetrative Anchors2
Fatigue Damage Evolution Model of Ceramic Matrix Composites Structures Based on Hysteresis loss Energy and life Prediction at Elevated Temperatures2
Nonlinear Mechanical Behavior of Glass Fiber/ Epoxy Resin Composite Under Medium and Low Strain Rates Loading2
Effect of Yarn Reduction Types on the Mechanical Response and Damage Mechanism of 3D Woven Composites Subjected to Low-velocity Impact2
A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors2
Design and Analysis of a Novel Carbon Fiber Reinforced Polymer Sandwich Adhesive Joint2
Multi-Cellular 3D Flat-Knitted Composite Panels Strengthened by PU-Foam: Manufacturing, Testing and Simulating2
Design and Optimization of Variable Stiffness Composite Cylinders With the Consideration of Manufacturing Interaction2
Low Velocity Impact Response of Preloaded CFRP/Aluminum Honeycomb Sandwich Plate2
Nonlinear Material Modeling for Mechanical Characterization of 3-D Printed PLA Polymer With Different Infill Densities2
Experimental Investigation of Oblique Impact Behavior of Adhesively Bonded Composite Single-Lap Joints2
Prediction of Equivalent Elastic Modulus for Metal-Coated Lattice Based on Machine Learning2
Wide Scale Characterization and Modeling of the Vibration and Damping Behavior of CFRP-Elastomer-Metal Laminates—Comparison and Discussion of Different Test Setups2
Analysis of the Forming of Interlock Textile Composites Using a Hypoelastic Approach2
Structural Behaviour of TPU Based Hybrid Laminated Structures Subjected to Static and Dynamic Perforation Loading2
Tolerance Optimization of Patch Parameters for Locally Reinforced Composite Structures2
Experimental Study on the Effects of Thermal Cycling and Moisture Exposure on Mechanical Properties of Alkali Treated Woven Jute Fiber/Epoxy Composites2
A Novel Algorithm in Stochastic Chopped Carbon Fiber Composite Structure-A Study of RVE Size Effect and Homogenization Response of Directional Modulus2
0.066126108169556