Colloids and Surfaces A-Physicochemical and Engineering Aspects

Papers
(The TQCC of Colloids and Surfaces A-Physicochemical and Engineering Aspects is 13. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Editorial Board298
Electron density regulation of bimetal phosphates via heterojunction interface engineering for electrocatalytic reaction224
Enhancing filtration flux and antifouling performance of PVDF membrane constructed from semi-interpenetrating network and block copolymers222
Analytical modeling of superhydrophobic surfaces with the microstructures composed of fibers and hemispheres215
Modeling liquid–vapor phase change experiments: Cryogenic hydrogen and methane201
Dual fire-alarm LBL safeguarding coatings with flame-retardant, EMI shielding and antibacterial properties157
Vertical magnetic field aided droplet-impact- magnetohydrodynamics of ferrofluids135
Graphene featuring imidazolium rings and electrostatically immobilized polyacrylate chains as metal-free electrocatalyst for selective oxygen reduction to hydrogen peroxide125
Respiratory chain inhibition and lipid peroxidation by carbon nanosphere against pathogens in the management of diabetic foot infection122
Two-dimensional PC3 monolayer as promising hosts of Li-ion storage: A first-principles calculations study116
Depiction of a non-aqueous ionic liquid surfactant-free microemulsion by dielectric relaxation spectroscopy116
Effect of zinc ion on synthesis of chromium-containing spinel from wastewater and insight into the synthesis mechanism113
Editorial Board106
Yolk-shell nanoparticles with different cores: A molecular dynamics study105
A continuous phase with better performance for photographing the dynamic behavior of droplets in oil: Poly (methylhydrosiloxane)103
Electrodeposition of antioxidant films from resveratrol97
Photocatalytic activity and mechanism of PCN@GO/AgNPs heterojunction in Rhodamine B degradation94
How does surfactant affect the hydrophobicity of wax-coated wood?93
Defect-rich CoFeCu alloy nanoflowers for efficient oxygen evolution reaction in alkaline media91
Enhancing interfacial elasticity via supramolecular microgel assembly for improved Pickering emulsions stability91
Green preparation of N-doped hierarchical porous carbon composites from humic acid extraction residue of lignite as anodes for lithium/sodium-ion batteries90
Human serum albumin-based propulsive Piperlongumine-loaded nanoparticles: Formulation development, characterization and anti-cancer study90
Effect of spin and orbital selectivity of DNA induced SiO2 coated Fe3O4 nanoparticles: X-ray magnetic circular dichroism study89
Facile and cost-effective fabrication of SERS substrate featuring high-density 3D nanopillars for sensitive pesticide detection88
Efficiency of a pyrimidine derivative for the corrosion inhibition of C1018 carbon steel in aqueous acidic medium: Experimental and theoretical approach86
Dispersion stability and interfacial properties of modified MoS2 nanosheets for enhanced oil recovery85
PANI-SnO2 nanorods decorated with Pdx-Niy nanoparticles for improved electrooxidation of methanol with extended durability84
Critical assessment of the correlation between surface tension components and Hansen solubility parameters84
Nanostructured silver-boron nitride hybrid materials: Toward high-performance antibacterial hydrogels with enhanced mechanical and thermal properties83
Study of the process of black TiO2 turning white and its molecular adsorption and photocatalytic behavior82
Au-Ag nano-garlands as a versatile SERS substrate: Two-step synthesis realizes the growth of petal-shaped branches on hollow Au-Ag nanoshells82
Preparation of NaHCO3 fire extinguishing agent with perfluoropolyether groups to inhibit rapid re-ignition of Class B fires82
Tribological performances of polyurethane or phenol-formaldehyde resin solid self-lubricating composites doped with PTFE and Mg-Al LDH80
Stability-optimized design of lubricant-impregnated surface with microcavity topography inspired by orange peel79
Nanoparticle-mediated photothermal and photodynamic antibacterial therapy for the treatment of periodontitis77
Kaolinite-based Janus nanosheets as effective compatibilizer of PLA/PBAT blend76
Self-assembled mesoporous particles of Antheraea pernyi silk fibroin for encapsulation and sustained release of 5-fluorouracil75
Editorial Board74
Synthesis of polystyrene/silica and poly(styrene-co-butyl acrylate)/silica nanocomposite particles by Pickering emulsion polymerization with non-functionalized silica nanoparticles73
Preparation of high electrochemical activity Pd/RGO composites on the microemulsion interface through radiation technique73
Highly stable and selective LaNiO3nanostructures modified glassy carbon electrode for simultaneous electrochemical detection of neurotransmiting compounds70
Silanization of siliceous materials, part 3: Modification of surface energy and acid-base properties of silica nanoparticles determined by inverse gas chromatography (IGC)70
In-situ synthesis of WO3–x/MoO3–x heterojunction with abundant oxygen vacancies for efficient photocatalytic reduction of CO269
Bimetallic PdM (M = Co, Ni) catalyzed hydrogenation of nitrobenzene at the water/oil interface in a Pickering emulsion69
Rational design of hexagonal zinc oxide/boron-doped g-C3N4 nanosheets as efficient electrocatalyst for enhanced sensing of rutin in fruit samples68
Rational engineering of superaerophobic CoMoSx electrocatalysts for overall water splitting68
Membrane-associated molecularly imprinted surfaces with tailor-made SiO2@polydopamine-based recognition sites for selective separation of artemisinin68
In-situ synthesis of UiO-66-NH2 on porous carbon nanofibers for high performance defluoridation by capacitive deionization67
Headgroup interaction effects in mixed fatty acid-alkyl amine monolayers66
Construction of porous poly (l-lactic acid) surface via carbon quantum dots-assisted static Breath-Figures method66
Self-assembled asparaginase-based nanoparticles with enhanced anti-cancer efficacy and anticoagulant activity66
Highly magnetically responsive porous nanoparticles based on tris(β-keto-hydrazo)-cyclohexane subunit: Fast removal of dyes from water with convenient recyclability65
Multi-layer photothermal film inspired by polar bear fur for anti-icing and photothermal de-icing in cold environments64
Fully convolutional networks-based particle distribution analysis at multiphase interfaces64
Investigation on novel redox-responsive ferrocenyl surfactants with reversible interfacial behavior and their recycling application for enhanced oil recovery64
Biomimetic gaseous plastron for blocking fouling-associated biological colonization64
Slow development of induced-charge electro-osmosis in cetyltrimethylammonium bromide solutions64
CO2 foam structure and displacement dynamics in a Hele–Shaw cell64
Research of a fracturing-oil displacement integrated working fluid based on betaine surfactant63
Effective photothermal-photodynamic treatment of hepatocellular carcinoma based on polydopamine-coated mesoporous silica nanoparticles63
Detection of lipase activity with liquid foams63
Chromium vanadate nanoparticles entrapped reduced graphene oxide nanosheets: A nanocomposite with high catalytic activity for the detection of hypertension-drug nifedipine in biological samples63
Fabrication of multiple LFIA strips with ZrO2@PEI-QDs nanosphere composites for rapid differentiation of acute aortic dissection and acute myocardial infarction63
Janus SiO2-surfactant dispersion designed for enhanced imbibition oil recovery in ultra-low permeability reservoirs63
Production and characterization of a blood analogue based on alginate microparticles62
Revolutionizing photocatalytic water treatment: An in-depth exploration of g-C3N4 iron oxide and carbon-mediated upgrading for an optimal decontamination of Vltava river water61
Construction of silicone composite with controllable micro-nano structure via in-situ polymerization on fiber surface and study on SO2 adsorption performance61
Study on the depression effect and mechanism of crude fucoidan on talc surface under xanthate system61
Dual-doping Fe-Ni oxide for ultrahigh performance seawater oxidation by high-concentration electrolytes61
Surface activity of herniariasaponin and non-saponin fractions of Herniaria L. species61
Size effects of Ag nanoparticle for N2 photofixation over Ag/g-C3N4: Built-in electric fields determine photocatalytic performance60
Fabrication of Eu3+-dipicolinic acid complex functionalized nanoSiO2 composites and their Langmuir-Blodgett films as visual fluorescence probe for tetracycline and oxytetracycline60
Preparation of zinc oxide loaded polyurethane/polysulfone composite nanofiber membrane and study on its waterproof and moisture permeability properties60
Fabrication of flexible conductive nanosheets at air-water interface by UV irradiation of loosely-packed AgNPs monolayer60
Synthesis of acrylated tannic acid as bio-based adhesion promoter in UV-curable coating with improved corrosion resistance60
Effects and mechanisms of Fe/N co-doped magnetic biochar for efficient removal of single and multiple dye60
Defective PdRh bimetallic nanocrystals enable enhanced methanol electrooxidation59
A novel silk fibroin-graphene oxide hybrid for reinforcing corrosion protection performance of waterborne epoxy coating59
Adsorption and interaction forces of commercial Poly(naphthalene sulfonate) (PNS) and Poly(carboxylate ether) (PCE) polyelectrolytes with negatively charged surfaces in monovalent and divalent electro59
Substrate controlled hydrophobicity of the Y2O3 films58
Preparation novel mercaptotriazole-functionalized paramagnetic nickel-zinc ferrite microspheres for absorbing Hg (II) in waste water58
Microfluidic synthesis of dual-encoded microbeads for multiplex immunoassay58
A tough bioadhesive based on co-assembly of polypeptide and polysaccharide for adhesion of soft tissues57
Tetrasulfonatomethyl-n-hexyl calix[4]resorcinarene tetrasodium assisted preparation of ZnFe2O4/ZnO composites with enhanced photodegradation performance for organic contaminants57
Development and evaluation of biodegradable alginate beads loaded with sorafenib for cancer treatment57
Eco-friendly surface coating of wool/polyester blend fabric using a combination of montmorillonite and polyquaternium 10: Enhanced flame-retardant performance using layer-by-layer assembly57
Construction of S-scheme NiCoSe2/TiO2 heterojunction for efficient photocatalytic H2 evolution57
Preparation of monodispersed emulsions by premix membrane emulsification without repetitive permeation: Influence of membrane permeation rate (flux) and emulsion viscosity56
Dopamine self-polymerized sol-gel coating for corrosion protection of AZ31 Mg Alloy56
Ni3S2/NiSe2 hollow spheres with low bonding energy Ni-Se bonds for excellent lithium-ion charge-discharge stability56
Effect of a fluorinated surfactant on Langmuir monolayer properties of minimal-linker gemini surfactants56
An ecofriendly approach for hydrophobization of cellulosic nonwovens: A comparative study of different biobased agents55
Vortex of viscoelastic fluid electroosmotic flow at the micro-nanochannel interface55
Imidazole-stabilized gold nanoclusters as photocatalytic initiator and crosslinker to fabricate functional hydrogel55
CO2/CH4 mixed-gas separation through carbon nitride membrane: A molecular dynamics simulation55
Facile purification of glass fiber powder by sedimentation for enhanced epoxy resin composites55
Biobased diglycidyl ether diphenolates: Effect of the ester moiety on fragrance oil microencapsulation by interfacial polymerization55
Self-assembled nanoparticle-mediated cascade chemotherapy and chemodynamic therapy for enhanced tumor therapy54
Effects of sodium oleate surface properties on the characteristics of two-phase foam in froth flotation54
Enhancing the comprehensive corrosion resistance of waterborne epoxy coatings:Combination of Bimetal Nanocontainer ZIF-8-Ce and g-C3N454
One-pot synthesis of pompon-like magnetic hollow SiO2-supported Ag nanoparticles for catalytic application54
MOF-derived CoOOH nanosheets and their temperature-dependent selectivity for NOx and ethanol54
Flame-retardant AlOOH/graphene oxide composite coating with temperature-responsive resistance for efficient early-warning fire sensors54
Efficient degradation of norfloxacin by BiOBr/Ag2CO3 Z-type semiconductor heterojunction: Mechanistic insights and degradation pathways54
Biotemplate synthesis of SnO2 hollow porous structures for enhanced isopropanol sensing performance54
Pebax/NC-PCL membrane containing well-distributed PCL grafted biodegradable nano-chitosan particles for CO2 separation53
Intelligent controlled release of sodium thioglycolate in poloxamer-cationic surfactant temperature-sensitive hydrogels53
Preparation and characterization of CIP@Fe3O4@PANI composites53
Editorial Board53
Micelle-modulated ribonuclease-like activities of oxo-bridged binuclear copper(ii) complexes with novel imidazole derivatives53
A novel manganese sulfide encapsulating biochar-dispersed zero-valent iron composite for high removal ability of Cr(VI) in water and its mechanism53
Microscopic interactions between hydrate particles/droplets in gas or heavy hydrocarbon under high pressure conditions: Cohesion, adhesion and tensile strength53
One-pot synthesis of magnetic oil shale semi-coke nanocomposite for Fenton-like catalytic organic dye degradation: Performance and mechanism53
Distinct liquid crystal self-assembly behavior of cellulose nanocrystals functionalized with ionic liquids53
Superior photocatalytic performance of Dy2O3/graphitic carbon nitride nanohybrid for the oxidation Rhodamine B dye under visible light irradiation: A superoxide free radicals approach52
Structural and dynamical aspects of extremely swollen lyotropic phases52
Graph neural networks for surfactant multi-property prediction52
Enhanced antibacterial activity of multi-walled carbon nanotubes loaded with hot-melt extruded Mulberry leaf silver nanoparticles52
BDT mediated asymmetric deposition of Ag on gold nanobipyramids for SERS detection of drug residues in aquaculture water51
Facile fabrication of a low-cost, room-temperature curable superhydrophobic coating with excellent stability51
Preparation and characterization of magnetic sodium alginate-modified zeolite for the efficient removal of methylene blue51
Improving the photostability and water resistance stability of chalcogenide red phosphor with inert CaF2 shells51
One-step synthesis of S-doped and nitrogen-defects co-modified mesoporous g-C3N4 with excellent photocatalytic hydrogen production efficiency and degradation ability51
A confined catalysis strategy: Lewis acid-base (B/Br) and hydrogen bond donor (-OH) multi-functionalized core-shell catalyst for CO2 cycloaddition51
Molecular modification of l-aspartate-α-decarboxylase and multi-enzyme catalytic preparation of β-alanine51
Oxidative crosslinking induced self-reinforcing waterborne polyurethane with tunable structure as multi-synergistic antibacterial biomimetic composite coating51
Sulfur poisoning-resistant TiO2/Cu-doped ZnIn2S4 photoanode for achieving efficient sulfur oxidation51
The dynamic regulation effect in X@Fe-N4/C electrocatalyst for the sequential oxygen reduction reaction51
Induction heating of magnetic nanoparticles: role of thermo-physical properties of the coating moieties50
Enhanced green leaching of spent lithium-ion batteries: Pyrolysis pretreatment combined with eco-friendly citric acid and ascorbic acid50
Construction of NiP/Ni(OH)2/Ag-ZIF photocatalyst with 2-methylimidazole framework for rapid removal of tetracycline50
Bio-based alternative for encapsulating fragrance oils in epoxy resin microcapsules50
Colorful, eco-friendly and scalable passive radiative cooling coatings integrating thermal insulation and self-cleaning properties50
A convenient synthesis of gold nanoparticles in Spirulina extract for rapid visual detection of dopamine in human urine50
Atomistic insights into heterogeneous reaction of hydrogen peroxide on alumina particles: Combining DFT calculation and ReaxFF molecular dynamics simulations50
Chemical-etched silver nanowires with tunable rough shape for surface enhanced Raman scattering50
A novel cationic surfactant synthesized from carbon quantum dots and the versatility50
β-cyclodextrin modified aliphatic waterborne polyurethane-based intumescent flame-retardant coatings: Experiments and pyrolysis kinetics49
A comparative study of rheological behavior in hybrid nano-lubricants (HNLs) with the same composition/nanoparticle ratio characteristics and different base oils to select the most suitable lubricant 49
Selective oxidation of benzyl alcohol to benzaldehyde with air using ZIF-67 derived catalysts49
Investigate the effect of ZnO/Bi2O3 nanocomposite: A synergistic versatile approach for biomedical and environmental applications49
Novel pH-responsive self-healing anti-corrosion coating with high barrier and corrosion inhibitor loading based on reduced graphene oxide loaded zeolite imidazole framework49
Comparative analysis of the effect of single-walled and multi-walled carbon nanotube additives on the properties of hydrocarbon-based drilling fluids49
Construction of Zn0.2Cd0.8S/g-C3N4 nanosheet array heterojunctions toward enhanced photocatalytic reduction of CO2 in visible light49
Anionic surfactant with enhanced interfacial wettability control capability for residual oil development48
Influence of Pt dispersibility and chemical states on catalytic performance of Pt/CeO2-TiO2 catalysts for VOCs low-temperature removal48
Synthesis of a hydrophobic association polymer with an inner salt structure for fracture fluid with ultra-high-salinity water48
Investigation of Cu-ZnO/SiO2 catalysts for CO2 hydrogenation: Effect of SiO2 support with different porous structure48
Polyaniline/cellulose nanocrystal nanorods integrated into waterborne polyurethane coatings for enhanced corrosion resistance48
Non-ionic surfactants in drug delivery vehicles: Physicochemical insights with systems of drugs, Igepal CA-630, bovine serum albumin and hen egg-white lysozyme48
Lamellar insert SnS2 anchored on BiOBr for enhanced photocatalytic degradation of organic pollutant under visible-light48
The influence of sodium alginate on kaolinite flocculation in presence of metal ions: Guidance for green processing48
Metal ions-doped electrospinning nanofiber films with changeable hydrophobic surface and adjustable tensile properties48
Designed composite catalysts of Cu-doped BiOCl nanosheets on CuFe-PBA cubes for enhanced photoelectrochemical H2 evolution activity in neutral medium47
Relationship between protein native conformation and ultrasound efficiency: For improving the physicochemical stability of water–in–oil emulsions47
Double roles of sodium hexametaphosphate in the flotation of dolomite from apatite47
Adsorption study of 3- tetradecylamine propyl amidoxime onto rhodochrosite surface: Implications for rhodochrosite-calcite flotation separation47
Synthesis of mesoporous MIL-100(Fe) from acid mine drainage sludge for norfloxacin removal: Industrial sludge high value utilization, adsorbent performance and contaminant removal mechanisms47
Evaluation of 2-phosphatebutane-1, 2, 4-tricarboxylic acid as a depressant in the flotation separation of fluorite from barite47
How does soy 7S globulin influence the thermo-responsive fibration process of methylcellulose chains in aqueous solutions?47
Spin-coating deposition of thermoresponsive microgel thin films47
Precipitation and hydrolysis of water-soluble ammonium polyphosphate on calcite surface depend on the number of P species47
Tunable surface charge and hydrophilicity of sodium polyacrylate intercalated layered double hydroxide for efficient removal of dyes and heavy metal ions47
Unveiling the synergistic potential of g-C3N4-MWCNT/In2O3 nanocomposite for enhanced organic pollutant degradation and cancer cell inhibition under visible light irradiation47
Reduced graphene oxide-TiO2/sodium alginate/polyacrylamide composite hydrogel for enhanced adsorption-photocatalytic degradation of methylene blue47
Designed synthesis of natural rigid dehydroabietylamine-tailored symmetric benzamide organogels by amide bonds and rigid rings coordinated self-assembly strategy46
A simple approach for fabrication of superhydrophobic titanium surface with self-cleaning and bouncing properties46
Adsorption of Pb(II) on covalent organic frameworks: Overlooked sorption sites formed in the post-synthetic modification process46
Photocatalytic RGO membrane with carbon nitride nanotube intercalation for enhanced wastewater purification46
Separation of halloysite/kaolinite mixtures in water controlled by sucrose addition: The influence of the attractive forces on the sedimentation behavior46
Crown-grafted loose nanofiltration membranes for the recovery of brine resources: Insights from molecular dynamics simulations46
Effect of the non-electrically conductive spindle on the viscosity measurements of nanofluids subjected to the magnetic field46
Facile construction of amphoteric lignin-based hydrogel to simultaneously capture ammonium and phosphate ions and reutilization as bio-based slow-release fertilizer46
Fluorine-free superhydrophobic surface with micron-nanosized two-tiered structure for self-cleaning, anti-frosting, and anti-icing applications45
Highly porous carbon derived from hydrothermal-pyrolysis synergistic carbonization of biomass for enhanced CO2 capture45
The influence of nanoparticle size, concentration, and functionalization on drilling fluid filtration properties45
In-situ growth of ZIF-8 nanocrystals on biochar for boron adsorption45
Improving monocrystalline silicon surface quality with chemical mechanical polishing using the slurry with the additive of isopropanol45
In vitro biocompatibility of polycaprolactone/hydroxyapatite nanocomposite membranes modified by oleic acid for bone regeneration45
Stability and thermal conductivity of TiO2/water nanofluids: A comparison of the effects of surfactants and surface modification45
Highly efficient novel heterojunction catalyst in the elimination of antibiotics under the photo-Fenton-like process45
Construction of 0D/3D carbon quantum dots modified PbBiO2Cl microspheres with accelerated charge carriers for promoted visible-light-driven degradation of organic contaminants45
Chitosan modified cuprous oxide nanoparticles with specific oxidoreductase-like activity for rapid and sensitive colorimetric detection of Cr(VI)45
Superhydrophobic F-SiO2/tea polyphenol coating with high efficiency photothermal anti-icing and de-icing properties45
Micromotors Mn3O4@Fe2O3@CoO@ZnO@graphite for enhanced photocatalytic degradation of dyes45
An S-scheme TiO2/g-C3N4 nanocomposite effectively degrades phenanthrene under visible light45
Fluorine-free preparation of superhydrophobic polyester fabric with directional moisture transport for efficient oil-water separation45
Plasmonic CuS 2D nanosheets through biologically and environmentally benign template free one-pot synthesis45
Synthesis of porous Mn/Co composite oxides as an efficient peroxymonosulfate activator for removal of methylene blue45
Boosting visible photocatalytic degradation of 2,4-dichlorophenol and phenol efficiency by stable core@shell hybrid Ag3PO4@polypyrrole45
Efficient removal of crystal violet by polyacrylic acid functionalized ZIF-67 composite prepared by one-pot synthesis45
High-sensitive electrochemical sensor based on Ni/NiCx-integrated functional carbon nanotubes for simultaneous determination of acetaminophen and dopamine45
Efficient removal of cationic dyes by a bivanadyl capped, highly reduced Keggin polyoxometalate through flocculation44
Efficient degradation of diazinon and adsorption of released phosphate through activating peroxymonosulfate by Zr-doped ZIF-8 encapsulated CoFe2O4 composite44
One-dimensional C/Co composite nanofibers derived from ZIF-67 with excellent wideband electromagnetic microwave absorption performance44
Removal of organic contaminants by starch-derived porous carbon via peroxymonosulfate activation: The role of N doping and Fe/Mn loading44
pH and redox dual-responsive Pickering emulsion based on silica nanoparticles and novel ferrocene surfactant44
Simultaneous removal of cationic heavy metals and arsenic from drinking water by an activated carbon supported nanoscale zero-valent iron and nanosilver composite44
Heat transfer properties of metal, metal oxides, and carbon water-based nanofluids in the ethanol condensation process44
High oleic sunflower oil and fully hydrogenated soybean oil nanostructured lipid carriers: Development and characterization44
Effect of temperature on the stability of supercritical CO2 foam stabilized with a betaine surfactant at high pressure44
Shale mineral interactions and interfacial mechanical properties modeled by molecular dynamics44
Dip-coating deposition of nanocomposite thin films based on water-soluble polymer and silica nanoparticles44
Molecular mechanism of competitive adsorption desulfurization of fuel oil involving small sulfur-containing molecules and thiophene44
One-pot synthesis for 2D nanostructured calcium borate/Ni-BDC composite nanosheets enabled tribological improvement44
Efficient removal of antimonate from water by yttrium-based metal-organic framework: Adsorbent stability and adsorption mechanism investigation43
Study on the characteristics and mechanism of a new type of antioxidant gel foam for coal spontaneous combustion prevention43
In-depth research on azole corrosion inhibitors - effect of N atoms position and quantity on copper corrosion inhibition performance in alkaline environments: Experimental evaluation and theoretical a43
Facile synthesis of V2O3/nitrogen-doped carbon shell nanoflower for boosted aqueous zinc ion storage performance43
Antibacterial properties of the flower shaped nano-CuFe2O4@MoS2 composites43
A criterion for when an emulsion drop undergoing turbulent deformation has reached a critically deformed state43
Augmented photocatalytic water splitting performance of CdS nanorods encased with Co-C@WS2 nanostructures43
Fabrication of high-quality microcapsules containing ionic liquid for application in self-healing conductive materials43
Supramolecular immobilization of lipase inspired by octopus suckers for biodiesel production43
In-situ growth of MIL-101(Fe) onto PET base for high-efficiency adsorption of low concentrations benzene series VOCs and easy recycling43
Adsorption behavior of Methylene Blue and Rhodamine B on microplastics before and after ultraviolet irradiation43
Investigating the impact of pore structure and surface chemistry on CO2 adsorption in graphitic slit-pores using GCMC simulation43
Ultralight, elastic, hydrophobic Willow moss-derived aerogels for efficient oil-water separation43
Polyethylenimine-aminated polyvinyl chloride fiber for adsorption of reactive dyes from single and binary component systems: Adsorption kinetics and isotherm studies43
Development of lipopeptide surfactants from silk sericin and evaluation of their surface active properties42
Modulating the properties of graphene quantum dots by heteroatom doping for biomedical applications42
Study on particle dispersion changes over time in aqueous Al2O3 slurries containing ammonium polyacrylate42
Biomass materials self-assembled core-shell CL-20 @Biomass materials-TiO2 energetic composites with reduced impact sensitivity and enhanced thermal stability42
Exploring the role of hydrophobic nanofluids in reducing shale swelling during drilling: A step towards eco-friendly and sustainable practices42
Synthesis and characterization of natural rosin-modified silica nanocomposite and its green multifunctional applications for drilling fluid42
Facile preparation of PHEMA hydrogel induced via Tannic Acid-Ferric ions for wearable strain sensing42
NiSe2/CoSe2 heterostructure nanoparticles anchoring on graphene for enhanced Li-ions storage42
Detailed DFT/MD simulation, surface analysis and electrochemical computer explorations of aldehyde derivatives for mild steel in 1.0 M HCl42
Axial ligand engineering enhanced CoN4-based catalysts as efficient electrocatalysts for ORR/OER with low overpotentials: A DFT study42
Combining layered double hydroxides and carbon nanotubes to synergistically enhance the flame retardant properties of composite coatings42
Ti3C2-MXene ionogel with long-term stability and high sensitivity for wearable piezoresistive sensors42
Determination of antioxidant capacity of glutathione encapsulated in alginate microcapsules using spectrophotometric and electrochemical methods41
BiOCl as the role of cleaner for the fabrication of self-cleaning PES membranes based on the RTIPS method41
Highly transparent, superhydrophobic, and durable silica/resin self-cleaning coatings for photovoltaic panels41
Facile fabrication of sulfuretted NiFe-layered double hydroxides/oxalic acid induced g-C3N4 Z-scheme heterojunction for enhanced photocatalytic removal of tetracycline and Cr(Ⅵ) under visible light ir41
Enhanced adsorption of congo red dye using dried chitosan functionalized MnFe2O4 viscoelastic fluid41
Effect of ms-substitution on aggregation behavior and spectroscopic properties of BODIPY dyes in aqueous solution, Langmuir-Schaefer and poly(methyl methacrylate) thin films41
Optimizations of performance of cellulose acetate modified by ZnSnO3/ZnO nanocomposites: electrical, dynamic mechanical analysis, and antibacterial activity41
Rational engineering of S-scheme CeO2/g-C3N4 heterojunctions for effective photocatalytic destruction of rhodamine B dye under natural solar radiations41
Comparative rheological study on hybrid nanofluids with the same structure of MWCNT (50%)-ZnO(50%)/SAE XWX to select the best performance of nano-lubricants using response surface modeling41
Double-layer temperature-sensitive hydrogel fabricated by 4D printing with fast shape deformation41
Single-step preparation of copper nanoparticle-enhanced activated carbon for anionic dye adsorption41
Zeolitic imidazolate framework-8/layered triple hydr(oxide) composite for boosting the adsorptive removal of acid red 1 dye from wastewater41
Fundamental study on the growth process of interfacial microbubbles in an air-supersaturated solution41
Maleic acid modified lignin for preparation of ultra-flexible and UV shielding gelatin/lignin films41
An ensuing repercussion of solvent alteration on biological and photocatalytic efficacy of Emilia sonchifolia (L.) phytochemicals capped zinc oxide nanoparticles41
Facile synthesis of MgS/Ag2MoO4 nanohybrid heterojunction: Outstanding visible light harvesting for boosted photocatalytic degradation of MB and its anti-microbial applications41
The electrochemical performances of porous niobium pentoxide with multi-walled carbon nanotubes nanocomposite incorporated with glassy carbon electrode for the sensing of chloramphenicol40
One-step synthesis of Mn-carbon dot nanoprobe for signal-on detection of arsenic and reversible temperature sensing40
Two step pore expansion assisted by KOH activation of nitrogen-doped biochar for enhanced gaseous iodine adsorption40
0.14537405967712