Composite Interfaces

Papers
(The median citation count of Composite Interfaces is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
An embedded machine learning strategy for analyzing interfacial characteristics in impact welding of dissimilar alloys48
Influence of irregular fibre surface and debonding on the elastic properties of jute/epoxy composites: Micromechanics and finite element approaches28
Hybrid polymer-oxide materials formed by non-stationary electrolysis as catalysts for hydrogen peroxide decomposition26
Preparation and Application of Class A1 Flame Retardant Composite Material with Waterproof Properties26
Weathering of compatibilized poly(hydroxybutyrate)/agave fiber biocomposites produced by different mixing methods24
Excellent properties of epoxy composite by constructing interlayer support structural fluorinated graphene oxide24
Polymeric blends and nanocomposites for high performance EMI shielding and microwave absorbing applications19
Carboxymethyl cellulose/montmorillonite bionanocomposite films incorporated with polyhedral oligomeric silsesquioxane17
Preparation of hydrogels from hydrochloric acid modified attapulgite for environmentally responsive fertilizers15
Reduced graphene oxide(rGO)-Ferrite composite inks and their printed meta-structures as an adaptable EMI shielding material14
Stress-dependent matrix crack opening in SiC/SiC composites: theory and analytical prediction14
Microstructure, mechanical properties, and reinforcement mechanism of carbide toughened ZrC-based ultra-high temperature ceramics: A review14
Fabrication of NiAl and TiC intermetallic matrix composite coatings14
Sugarcane Stem Derived Hybrid Scaffold for Bone Tissue Engineering via Top-down Approach13
Study on the construction of polyethyleneimine/nano-silica multilayer film on the carbon fiber surfaces to improve the interfacial properties of carbon fiber/epoxy composites13
Performance of engineered cementitious composites under-elevated temperature--a review12
Infiltration behavior of copper melt into porous graphite and saturation improvement by WC particles doping12
Experimental investigation and molecular dynamics simulations of plasma treatment on the interface properties of carbon fiber-reinforced PI resin composites11
Impact of fiber tortuosity on fatigue behavior of SiC fiber reinforced Ti alloy revealed by X-ray computed tomography11
Interfacial strengthening in bio-inspired materials: a review11
A comparative study of processing route, microstructures, fracture analysis and phase formation of Al-Si/Mg 2 Si functionally graded composites: an overview10
Molecular dynamics for optimizing interfacial properties of carbon fiber-reinforced polycarbonate: molecular conformation10
Efficient toughening of epoxy anhydride thermosets with modified PVA fibers10
Influence of interfacial aspects on electromagnetic interference shielding performance of graphene reinforced nanocomposites: an overview10
Double Pickering emulsion as a template to synthesize composite oil absorption materials with three-dimensional porous structure10
Fabrication of CdS/C3N5 photocatalyst for enhanced H2 production10
Fire-retardant acrylic coating by silica -coated limestone (SCL) microencapsulation9
MD simulation analysis of the anchoring behavior of injection-molded nanopits on polyphenylene sulfide/Cu interface9
Nanoclay/organic filler-reinforced polymeric hybrid composites as promising materials for building, automotive, and construction applications- a state-of-the-art review9
Advance in the research on the interface constitutive relationship of SiC p /Al composites9
Molecular dynamics simulation of interfacial adhesion behavior between waterborne epoxy resin emulsified asphalt and aggregate9
Composite membrane comprised of SnO 2 nanoparticles loaded intercrosslinked network of Polyvinylalcohol and Chitosan for proton transfer membrane fuel cells9
Carbon nanotube/glass fabric composites for radar absorption8
Molecular dynamics simulation of the temperature effect on ideal mechanical properties of SiC/BN interface for SiCf/SiC composites8
Experimental and numerical investigations on interface microstructure characteristics and wave formation mechanism of Sn/Cu explosive welded plates7
Workability and mechanical behavior of steel fiber reinforced self-compacting concrete with supplementary cementitious materials7
Complex TiC-Ni-based composites joined to steel support by thermal explosion under load: synthesis, microstructure and tribological behavior7
In-situ polymerization of different molecular weight polyethylene glycol and maleic acid onto carbon fiber for reinforcing polyamide 667
Fabrication of bi-functionalized nanocomposite coating for simultaneous improved thermal stability and corrosion protection performance based on polyaniline-reduced graphene oxide/organo-modified mont7
Effect of plasma treatment on high temperature interfacial properties of Chinese-made T800 CFRP7
A study on the thermal resistance over metal–carbon nanotube interface by molecular dynamics simulation6
Study on the fabrication and performance of 3D-Network SiC/Cu composites6
Comparative analysis of rubber/cementitious interface enhanced by multiple modifying agents in rubber concrete - experimental and molecular dynamics studies6
Large-scale dispersion of the hierarchical (1D, 2D and 3D) carbonaceous nanofillers in thermoplastic polyurethane through supramolecular self-assembly and extrusion6
Mechanical properties of N440/SiO2composites with fugitive carbon interphases6
Aerogel-based composites for electromagnetic interface shielding applications6
Mechanical properties and wear resistance of Cf / epoxy resin composites with in-situ grown SiC nanowires on carbon fibers6
Liquid-phase deposition of Al2O3 coating on quartz fiber for enhanced strength at elevated temperature6
Role of fiber-reinforced chip seal interlayers in asphalt pavement bonding strength6
Characterization of composite materials with recycled wind turbine blade additives using atomic force microscopy6
Study on the interlayer toughening of carbon fiber/polyaryletherketone composites with polyarylether nitrile film6
Multi-functional AA6061 alloy hybrid composites via friction stir processing: tailoring properties with TiNi and ceramic nanoparticles6
Preparation and properties of silica isophorone diisocyanate microcapsules for self-healing anticorrosive coatings5
Polymer-integrated ternary nanocomposite electrode with reduced graphene oxide and tin disulfide for improved capacitance and long-term stability in supercapacitor applications5
Ultrasonic-Assisted alkali and polyvinyl alcohol treatment for enhancing the mechanical of sisal fiber and interfacial properties with starch5
The plastic behavior of matrix and its effect on the interface stress transfer in fiber-reinforced composites5
Effect of aramid nanofibers on interfacial properties of high performance fiber reinforced composites5
Assessment of frictional-bond strength at the interface of single SSF in cementitious composite and prediction of accompanying pressure of surrounding matrix5
Does a polymer film due to Rayleigh-instability affect interfacial properties measured by microbond test?5
Microstructure and properties of nano-C and in-situ Al2O3 reinforced aluminum matrix composites processed by high-pressure torsion5
Enhanced dielectric and mechanical properties of silicone rubber composites using the coordination effect between different dimensional fillers of Ti 3 C 5
Tuning optical and structural properties of polystyrene nanocomposites with rutile TiO₂ nanoparticles5
Characterization of the interface and interphase region in the multi-walled carbon nanotube modified epoxy resin/carbon fiber hybrid nanocomposite5
Photosensitive hybrid polymer nanocomposites on the base PVDF+CdS/ZnS for solar cells application5
Advancing thermoset polymer composites with nanoclay reinforcement: a comprehensive investigation within composite interfaces5
The mechanical strength of sulphoaluminate cement-gypsum composite material reinforced with polypropylene fibers synergistically modified by KH570 and nano-SiO25
Interlayer damage analysis of resin based fibre composites under hygrothermal and load coupling environment5
Correction5
Enhanced mechanical and damping properties of epoxy using aggregated nanoparticles organic-inorganic hybrid as a filler4
Research progress of magnetic TiO 2 photocatalyst in wastewater treatment4
Preface for the 30th Anniversary Issue4
Excellent interfacial structural integrity of pre-oxidized carbon fiber-reinforced carbon-carbon composites4
Deposition voltages on the phase evolutions, microstructures, and oxidation behaviors of thermal-resistance Glass-MoSi 2 -SiC coating4
Characterization of eco-engineered hybrid polymer composites: reinforcing epoxy with basalt fibers and recycled biochar from rice husk for enhanced mechanical and environmental performance4
Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network4
Recent advances on improving the mechanical and thermal properties of kenaf fibers/engineering thermoplastic composites using novel coating techniques: a review4
Effect of glass beads on the tensile and impact properties of polyurethane bark glue4
Silver and copper nanowire-based nanocomposite for transparent electrodes: deposition methods and applications in solar cells4
An investigation of the impact of functionalized MWCNT reinforcement on interlaminar strength of glass/epoxy composites: a comparative view4
Fluorescent modification and performance study of carbon quantum dots on twisted bamboo fiber bundles4
Ferroelectric, dielectric, and EMI attenuation characteristics of BaFe 2 O 4 /MWCNTs/epoxy nanocomposites3
Functionalized nanoclays in bioactive materials3
Carboxy styrene-butadiene latex and PVA fiber co-modified rubber concrete - experiment and molecular dynamics simulation3
Effect of hydrothermal carbon interphase thickness on mechanical properties of Cf/SiBCN mini-composites3
Advancing bone tissue engineering: multi-walled carbon nanotube-polylactic acid composites for enhanced regeneration3
Effect of two-dimensional nanomaterials on the interfacial properties of large tow carbon fiber composites3
Molecular dynamics study on the transport of water molecules and chloride ions in graphene oxide-modified cement composites3
‘Ball-on-plane’ ZnS@RGO compound filler: effect on tribological properties of thermosetting polyimide film3
Improved amine functionalization of carbon fiber surfaces by O 2 plasma activation treatment3
Integrating machine learning and response surface methodology for analyzing anisotropic mechanical properties of biocomposites3
One-pot preparation of superhydrophobic lignocellulose composites and their oil-water separation properties3
Fabrication, characterization and performance analysis of different Ag/PVA nanocomposite membranes for debenzenation of model pyrolysis gasoline using pervaporation3
Structural evolution of palygorskite for reinforcing the performance of polypropylene3
MoS 2 nanosheet assisted poly vinyl alcohol cross-linked with carboxylated acryl-amido-2-methyl-1-propanesulfonic acid in medium temperature proton exchange membrane3
Mechanical and sliding wear behavior of stir-squeeze cast and T6 heat-treated AA7068-ZrO2p composite3
Fabrication, characterization and thermal properties of PVC+Si based polymer nanocomposites3
Investigation of mechanical properties on functionally graded material reinforced with graphene nanoplatelets for biomedical applications3
Multiscale experimental and simulation analysis on the synergistic modification mechanism of nano-SiO₂/EVA at the recycled concrete interface3
Compatibilization of novel GO-XNBR-g-GMAC/XNBR/XSBR nanocomposites: the relationship between structure and properties3
Enhanced interfacial and mechanical properties of carbon fabric/PA12 composites via grafting silanized nano hexagonal boron nitride onto the fibers3
Morphology-controlled calcium silicate and natural polymer composite materials: synthesis, structure and mechanical properties3
Micromechanical modeling cyclic loading/unloading hysteresis loops of 3D needle-punched C/SiC ceramic-matrix composites3
On the laser surface pre-treatment to enhance the surface texture, wettability and adhesion bonding strength of aluminium 7075-T6 laminates3
Air Plasma-Nano ZnO Coating Improves the Impact Resistance of Ultra-High Molecular Weight Polyethylene Fiber3
Superhydrophobic fluorescent micro-/nano-composites from carbon dots encapsulated in CaCO 3 -SiO 23
Synthesis of new quinoline derivatives based on mono-functional polybenzoxazines for oil-water separation, anti-corrosion and antibacterial applications3
Pull-off bond strength of novel wide rounded ends fiber and impact of fiber stretching on fiber/matrix frictional-slip bond strength3
Investigating the effect of recycled irregular metallic particles embedment on the interlaminar strength of polyamide-based composites3
Formation and characterization of Pt-Cu-IPMC with high specific surface area and dendritic electrode3
Anti-dryable, anti-freezable, and self-healable conductive hydrogel for adhesive electrodes3
Effectiveness of alumina/copper oxide nanocomposites in removing cadmium ions from aqueous solutions3
Microbond testing of the interface in glass fibre vinylester composites3
Interfacial shear strength and durability analysis of carbon fiber/rubber conductive composites for snow melting on bridge decks2
Prediction of interfacial shear strength of CNT overwrapped carbon fibers using molecular dynamics and Fourier series decomposition of surface asperities2
A review on interfacial structure optimization and its mechanism on the properties of carbon reinforced metal-matrix composites2
The effect of thermal annealing of GO/PVA on their physical, structural, and morphological properties2
Thermoset droplet curing performance in the microbond test2
Enhancing puncture resistance and mechanical properties of hybrid polymer composites reinforced with silica nanoparticles for aerospace applications2
Atmospheric plasma spray coating of antibacterial nano silver-hydroxyapatite on titanium surface for biomedical applications2
Enhancement of mechanical and tribological properties in glass fiber-reinforced polymer composites with multi-walled carbon nanotubes and ANN-based COF prediction2
On the anisotropy in the dry-sliding behaviour of a self-lubricating PTFE composite and the effects from surface texturing2
Dielectric and EMI shielding properties of Mn 3 O 4 nanoparticle-decorated MWCNTs embedded bio-benzoxazine cross-linked poly(o-phe2
Surface modification and dispersity of chopped carbon fiber and its effects on mechanical properties of gypsum-based composite materials2
Statement of Retraction: Simultaneously enhanced interfacial, mechanical properties and flame retardancy of high-density polyethylene-based composites using Mg,Al-containing melamine polyphosphate-gra2
Moisture resistance treatments of natural fiber-reinforced composites: a review2
Influence of argon plasma treatment on interfacial performance of CFRP at high temperature2
Compatibilization strategies for PLA biocomposites: a comparative study between extrusion-injection and dry blending-compression molding2
Influence of ratio of multi-walled carbon nanotubes and graphene on microstructure and mechanical properties of copper-graphite composites fabricated by spark plasma sintering2
The effect of laser-texturing configurations on the interfacial resistance of carbon reinforced aluminium laminate2
Frictional pull-out work capacity of macro-SSF in concrete composites and evaluation of matrix deterioration due to kinematic fiber-end-slip after full-debonding point2
Preparation of thermally stable organic-inorganic hybrid nanocomposites from chemically functionalized oxidized graphite by in situ catalytic oxidative decarboxylation2
Thermal cyclic fatigue damage evolution of fiber-reinforced ceramic-matrix composites under constant loading2
Preparation of super-hydrophobic hollow silicon dioxide and titanium dioxide cooling coatings and their application as green building materials2
Multiscale investigation of the fate of silver during printed paper electronics recycling2
Formation characteristics and properties of an explosion-welded steel–aluminum composite with a diffusion barrier2
Study on wettability behavior and wear resistance mechanism of ZTA-ceramic-reinforced HCCI composites2
Improving mechanical properties of high-temperature resistant carbon fiber/phthalonitrile composites via surface modification: a comparative study on modification methods2
Study of the effect of phase state on the interfacial thermal conductance between PCMs and ceramic skeletons2
Synthesis, Characterization and anti-corrosion property of GPTMS functionalized mesoporous silica (F-SBA-15) incorporated aliphatic chain containing polybenzoxazine nanocomposites2
Functionalized boron nitride nanosheets and their polypropylene nanocomposites: influence on thermal, mechanical, rheological and wear behaviour2
Roles of different organic-inorganic hybrid interfaces in enhancing the mechanical properties of continuous basalt fiber/epoxy composites2
Effect of adhesives on the interfacial diffusion behavior and mechanical properties of WC particle-reinforced Fe matrix composites2
Improving properties of h-BN/GH4169 self-lubricating composites prepared using nickel coated h-BN powders2
The synergistic strengthening effect of silane coupling agent on the interface between PVA/EPS and cement: experiment and molecular simulation2
Enhanced interfacial interaction, mechanical properties and thermal stability of basalt fiber/epoxy composites with multi-scale reinforcements2
Towards robust synchronous belts: influence of surface characteristics on interfacial adhesion2
Reinforcement of various characteristics of biocompatible PVA/PMMA/ N- GO polymer nanocomposite by functionalization of GO2
Characterization of interfacial bonding properties of Vitrimer resin/ T700 fibre2
Surface treatment of natural fibers for enhancing interfacial adhesion and mechanical properties in biocomposites - a comprehensive review2
Preparation of organic-inorganic hybrid adhesion promoters for polyurethane-metal adhesion and their properties2
Sandwich Structure-based of Zinc Nanoparticle-enhanced Flexible Sensor2
Emulsified Ni paste for damage-free coating on BaTiO3/polymer dielectric composite layer in MLCCs2
Correlation between toughness and metal volume fraction in carbon-glass fiber laminates tested under tensile loading2
0.041737794876099